Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Maternal Leave
• Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Demonstrate proficiency in Building Automation Systems (BAS), Entrata and CMMS systems for timely logging of service requests and completed work.
• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s standards.
• Perform physically demanding work to maintain the asset, and other property features to minimize liability concerns.
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems such as: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot- & cold-water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted power supply (UPS), elevators and lifts, parking structures (ventilation/drainage systems, T-Joints), entrance & exit gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, and insulated glass units (IGUs).
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire dampers.
• Assist in creating emergency and disaster preparedness plans and protocols.
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as needed.
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Supervisor.
• Coordinate maintenance objectives and daily assignments with the Supervisor.
• Diagnose and perform routine maintenance/repair in a timely and professional manner.
• Assure all service requests are completed daily.
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of completion.
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident trust.
• Inspect vacated apartments and record necessary repairs and maintenance, informing the Facilities Supervisor of needed services and repairs.
• Routinely perform duties including basic appliance repair, general carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the General Manager/Property Manager.
• Routinely inspect interior common areas and the exterior of the property, ensuring daily upkeep of all common areas with company standards, and all the light fixtures are in working order.
• Complete preventive maintenance tasks on all equipment and operating systems to ensure warranty compliance and extended useful life.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as assigned.
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and safe. 
• Maintain parts and supply inventory, as authorized.
• Clean and organize the workshops, storerooms, boiler rooms, and utility rooms.
• Clean pools; adjust and maintain chemicals to proper levels, if needed.
• Pressure-wash sidewalks, buildings, pool decks, etc.
• Assist in snow removal at property, as required.
• Assume responsibility for after-hours emergencies at the direction of the company supervisor/manager.
• Undertake training related to job duties as deemed necessary.

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

FIELD SERVICE TECHNICIAN – Level 1, 2 or 3

Purpose of Position:

IEM will provide training on our specific equipment and commissioning process in Ashburn, VA for approximately 4 weeks. You will be responsible for hands-on field service work at customer sites, with a focus on installation of components and subassemblies, and basic commissioning of IEM equipment primarily in data center or industrial applications. This includes, but may not be limited to:

• Attending project meetings as required, including coordination with contractors and clients.
• Installation and modification of electrical or mechanical components and subassemblies which may include: Panelboard interiors, Circuit breakers, Bus bar, Switchgear section doors and subpanels, addition of control components, Power Cabling and control wiring;
• Perform basic testing of modified assemblies (visual, ductor, etc.).
• Perform basic commissioning of switchboards, controls panels, and power products.
• Troubleshooting of electrical circuits and networking equipment.
• Coordinating with Technical Project Manager or manufacturing facilities to find solutions to product or commissioning issues identified by IEM or reported by the customer in the field, and identifying additional field resources needed for installation and replacement parts.
• Performing preventive maintenance, field installations and modifications to existing equipment
• Technical product support

Education and Experience:

• A technical degree or equivalent and 8 yrs+ of experience working in a manufacturing environment, data center or field service role with COMMISSIONING OF LV/MV ELECTRICAL SWITCHGEAR (required for Level 3 candidates).
• Must be a team player and have strong communication skills
• Ability to work independently without direct supervision is a must
• Ability to travel (75%). Must be willing to work evenings and weekends when needed.

• Experience with switchgear and electrical controls system. (required for Level 3)
• Military experience (Plus)
• Ability to read and interpret electrical wiring diagrams (required for level 3)

Compensation

The hourly range for this role is $36.30 -$52.80 per hour, based on location, experience, and qualifications.

PURPOSE OF POSITION:

The purpose of the Field Service Lead role is to manage, supervise, and optimize the performance of a team of field service technicians and engineers as they perform start-up/commissioning, troubleshooting, and maintenance of IEM products at customer sites. This is a working-lead role, combining hands-on field responsibilities with direct oversight of a team of approximately 8 technicians supporting 2–6 active customer sites.

SUPERVISORY RESPONSIBILITIES:

• Provides daily guidance, work direction, coaching, mentorship, and technical support to field service technicians.

ESSENTIAL FUNCTIONS:

• Lead and coordinate start-up and commissioning activities for electrical equipment across multiple customer sites, ensuring on time completion and minimizing open issues.

• Provide daily supervision, mentorship, and training to field service technicians.

• Serve as the technical lead, offering product expertise and advanced troubleshooting guidance to technicians and engineers.

• Travel to IEM manufacturing or field service facilities as required to participate in or lead training activities, factory witness tests, and shop testing.

• Identify project areas of risk that may adversely affect the success of subordinate technicians and report these risks to management for action.

• Works on job sites to complete project start-up/commissioning, resolving punch list items found at the job site. Works with IEM Project Managers to update punch lists and ensure jobs are closed out and paperwork deliverables are met.

• Coordinate with commercial and administration teams for requests outside of the startup/commissioning scope.

• Ensure technicians have required tools, materials, and documentation to perform work effectively at each site.

• Report product or quality concerns to management and collaborate with production and engineering teams to address identified deficiencies.

• Work with the Division Manager, Field Service Manager, Field Service Support, and Site Operations Representative in scheduling additional field resources and/or teams to cover service needs.

• Perform other duties as assigned by management.

COMPETENCIES:

• Team Leadership & Coaching: Provides day-to-day direction, mentorship, and support to field service technicians, reinforcing accountability, development, and high-quality execution.

• Technical Expertise: Demonstrates strong working knowledge of electrical equipment start-up, commissioning, troubleshooting, and maintenance, and serves as a technical resource to the team.

• Planning & Coordination: Organizes field activities, manpower coverage, tools, materials, and documentation to support multiple active customer sites and meet service demands.

• Customer Focus: Builds and maintains positive customer relationships through professionalism, responsiveness, and effective communication during field activities.

• Problem-Solving & Decision-Making: Identifies field issues, assesses risk, and takes timely, practical action to support project completion and minimize disruption.

• Safety & Compliance: Promotes and follows safe work practices, including LOTO and site-specific safety requirements, and reinforces compliance across the team.

• Communication & Collaboration: Communicates clearly with technicians, managers, project teams, and internal support functions to ensure alignment, issue resolution, and timely closeout of work.

• Organization & Execution: Manages multiple priorities, maintains attention to detail, and ensures field documentation, punch list updates, and follow-up actions are completed accurately and on time.

EDUCATION AND EXPERIENCE:

• Associate degree, vocational training, military experience, or equivalent experience in power distribution systems, including switchgear, UPS, generators, PDUs, or related equipment commissioning activities.

• Minimum of 2 years of field service experience, with an emphasis on start-up and commissioning of electrical equipment.

• Experience with switchgear, electrical distribution systems, and electrical control systems preferred.

• Familiarity with advanced communication protocols and networking concepts preferred.

• Prior supervisory or lead-level experience preferred.

• Understanding of lock-out/tag-out (LOTO) procedures involving multiple power sources required.

• Strong teamwork and communication skills required.

• Ability to work independently with minimal supervision required.

• Effective problem-solving skills required.

• Strong organizational skills and the ability to manage multiple priorities required.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Physical Demands: Activities: Sitting – 20% Walking/Standing – 80% Lifting: Must be able to bend, lift, and carry equipment and materials up to 50lbs. Vision: Long periods of close work on technical equipment, drawings, and computer screens.

Travel: Occasional travel (up to 75%) may be required to IEM regional field offices and vendor sites.

Mental Demands: Ability to interpret technical information, analyze issues, prioritize multiple tasks, solve problems in the field, and make sound decisions in a fast-paced service environment. Environment: climate-controlled office and warehouse environments, with occasional exposure to customer job sites as needed.

Fairstead is hiring a Maintenance Technician to maintain the day-to-day operations and assume responsibility for maintaining the property's physical assets. 

RESPONSIBILITIES: 

• Inspect buildings and equipment regularly for needed repairs and improvements. 

• Perform necessary preventative maintenance and repairs on the property as needed.  

• Implement maintenance policies and standards to prevent misuse of property appliances.  

• Ensure that properties are safe and avoid any danger to their occupants, visitors, and workers.  

• Clean and prepare vacated buildings and rooms for new occupants to move in.  

• Check electrical wiring for accuracy and compliance with regulatory standards.  

• Check safety systems and devices for operational effectiveness monthly.  

• Participate in the on-call rotation. Respond promptly to emergency maintenance problems that may require attention outside of normal working hours.  

• Maintain an inventory of supplies, tools, and equipment. 

BENEFITS: 

• Generous employer contribution for Medical Insurance through Meritain Health. 

• Employer Paid Vision Plans. 

• Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%. 

• 12+ paid Holidays. 

• 15 days of PTO. 

• 7 Sick days. 

• Employer Paid Life Insurance. 

• Flexible Spending Account. 

• Nationwide Pet Insurance. 

• Disability Insurance. 

• Laser Correction Discount. 

• Employee Discounts on appliances, apparel, and more. 

QUALIFICATIONS: 

• Mechanical skills to handle minor repairs and fixtures.  

• Knowledge of electricity to diagnose electrical problems and carry out minor repairs.  

• General maintenance skills.  

• Verbal and written communication skills for effective delivery of information.  

• Prior experience as a Service Technician or in a similar role.  

• HVAC, CMRP, or equivalent certification preferred.  

• Ability to stand for extended periods.  

• Ability to lift to 70 pounds without assistance.  

• Dexterity and attention to detail. 

About the Team:  

The Stennis Test team designs, builds, and operates Relativity’s propulsion and stage test stands. Team members are hands-on with large-scale, complex systems including fully integrated engines and stage assemblies, pushing hardware to the limits and directly contributing to flight readiness. The work is fast-paced and highly operational, ideal for those with backgrounds in aviation, automotive, manufacturing, offshore operations, industrial systems, construction, or adjacent industries. You’ll work in a close-knit, dynamic environment where collaboration between technicians, operators, and engineers is not only encouraged, but expected. As the company scales, the Stennis Test team becomes even more critical to unlocking our next phase of growth: proving out full-stage systems and paving the way for routine, reliable flights of Terran R.

About the Role: 

As a Propulsion Test Technician, you will perform functions in daily test operations supporting engine testing, building of new test stand facilities, and modifying existing test stands. 

• Perform the installation, operational checkouts, troubleshooting, and maintenance of test stand equipment and hardware
• Fabrication, installation, troubleshooting, and maintenance of fluid system tubing and hardware
• Assemble, install, checkout, and maintain a wide array of components that include sensors for fluid system monitoring
• Proactively perform work according to procedures, specifications, and test instructions
• Disassembly and precision cleaning of valves, regulators, and other components
• Monitor and maintain an inventory of consumables, tooling, and equipment
• Must be able to lift a minimum of 50 lbs unassisted
• Must be able to stand for extended periods
• Must be able to stoop, bend, crawl, and maneuver in tight spaces
• This position will require occasional night shifts, weekends and possible travel

About You:  

Basic experience in medium to heavy industrial maintenance, instrumentation, data and control systems, avionics hardware, and/or mechanical systems OR Associates degree in related mechanical of electrical technical discipline. Each technician has a primary focus area: mechanical or instrumentation. Below are skills needed for all technicians as well as skills necessary for each focus area.

• Ability to operate a wide range of hand and power tools for fabrication operations

Skills needed for each focus area:

• Mechanical:
  • Experience with fluid/pneumatic systems and their components
  • Experience with mechanical components and their systems
• Instrumentation:
  • Experience with electronic circuits and sensor types used to measure temperature, pressure, flow, displacement, and vibration
  • Experience with electronic test equipment, e.g. oscilloscopes, signal generators, and/or multi-meters

Nice to haves but not required:  

• Experience operating industrial warehouse equipment
• Operational understanding of sensor types used to measure temperature, pressure, flow, and displacement
• Experience installing and making repairs to instrumentation, data acquisition systems, and/or avionics systems
• Experience fabricating, installing, and checking out fluid system tubing and hardware

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Stennis, Mississippi.

Position Description

Origis Services, LLC is a rapidly expanding Operations and Maintenance provider in the United States.  Our solar asset portfolio continues to increase at a near exponential rate, with a mixture of Owner developed and constructed sites and third-party sites contracted, or already under management. Our goal is to provide a more inclusive service capability, driving out the large expenses that are normally passed through to the owner. 

The Solar Plant Manager provides day-to-day leadership and strategic oversight at the plant level, ensuring high standards in safety, performance, and operational culture. They lead by example, drive continuous improvement, and are accountable for creating a site culture that aligns with Origis Services’ values: Safety, Accountability, and Transparency.

The Plant Manager is responsible for aligning site operations with company goals, ensuring safe and compliant practices, building team capabilities, and delivering consistent performance across all site metrics.

Key Behaviors

As the on-site leadership presence, the Solar Plant Manager consistently demonstrates high standards in safety, integrity, communication, and team development. They are the cultural and operational role model for Origis Services’ principles of Safety, Accountability, and Transparency.

Key Deliverables

1. Operational Leadership: Own site-wide execution of safety, operational, and performance programs. Drive high performance and accountability through clear expectations and strong daily leadership.
2. Safety Culture Champion: Build and maintain a proactive safety culture by leading safety programs, audits, and training. Ensure all site activities comply with OSHA, NFPA 70E, and other regulatory standards.
3. People & Performance Leadership: Lead, coach, and support site teams to perform at their best. Drive engagement, growth, and team alignment with company values and performance expectations.
4. Process Ownership: Ensure implementation of Origis Services’ operational processes, procedures, and tools. Drive consistency, accuracy, and improvement across work management, reporting, and communications.
5. Team Development: Develop and retain top talent at the site level through coaching, structured training, and performance management. Support succession planning and cross-site collaboration.

Specific Duties and Responsibilities

• Lead the Safety and Accident Prevention Programs. Conduct regular safety inspections, audits, and briefings. Ensure all site personnel and third parties follow all safety protocols and emergency procedures.
• Serve as the site’s senior-most technical, operational, and safety leader.
• Coach, mentor, and support development of site-based technicians and contractors.
• Oversee the execution of preventative and corrective maintenance plans in accordance with standards and OEM recommendations.
• Drive daily performance and accountability to site KPIs and operational goals.
• Ensure accurate documentation of maintenance, outages, parts usage, safety inspections, and other key site activities.
• Manage contractor relationships and vendor performance. Ensure work is executed safely and according to plan.
• Oversee inventory control, spare parts planning, and replenishment strategies.
• Ensure high-quality care and control of site tools, vehicles, and materials.
• Maintain site vegetation and coordinate auxiliary services as needed.
• Represent the site internal and external communications. Coordinate with Regional Managers and corporate support functions.
• Be available to support emergencies, outages, and critical events outside of normal hours. Participate in on-call rotation.

• Maintain all plant-owned tools, equipment, and fleet vehicles to company standards.
• Oversee tool calibration, equipment inspections, vehicle maintenance, and inventory tracking.
• Exercise discretion and judgment when making decisions regarding local purchases, vendor use, and cost control.
• Monitor and report cost drivers at the plant level and communicate budget risks promptly.

Minimum Certifications

• OSHA 30-Hour Training for General Industry
• NFPA 70E – Workplace Electrical Safety
• First Aid, CPR, AED

Location             Columbus, MS

Travel                 Up to 20% travel as needed

Job Level           Manager - will have direct reports

Principal Duties/Responsibilities:

· Performs mid to expert-level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies, and repair items as necessary.

· Independently performs maintenance as per industry standards.

· May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Complies with 5S and housekeeping standards.

· Drives and participates in CI activities - processes, results, and cost savings.

· Updates records and reviews CMMS history.

· Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems.

· Utilizes predictive maintenance technologies to collect equipment performance data.

· Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development.

· Completes on-the-job and technical self-study programs for career development.

· Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

· High School Graduate or equivalent (GED).

· Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program.

· Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate

· May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.