Position Overview

We are seeking a Senior RF & GNSS Satellite Engineer to lead the design, analysis, and integration of our spacecraft's GNSS and TT&C RF subsystems. You will own the GNSS architecture and work closely on the TT&C subsystems. This role requires strong RF systems experience to develop link budgets, analyze dynamic systems, integrate hats and test setups, and manage design projects with external antenna vendors. 

Key Responsibilities:

• Leads the technical definition, system design, and documentation for satellite's CSat GNSS subsystem.
• Collaborates on the design and testing of the TT&C subsystem.
• Leads the architecture and system design for all owned TT&C ground stations.
• Drives R&D for new TT&C solutions and frequency bands, owns the TT&C link budgets, and contributes to the link budget tool development.
• Provide support to system-level Compatibility and EMI/EMC testing campaigns.
• Subsystem Ownership & Collaboration: Lead the architecture, specification, and hardware validation of the spacecraft GNSS subsystem, while acting as a core contributor to the design and performance of the TT&C subsystem.
• RF Link Budgets: Develop, maintain, and rigorously analyze comprehensive RF link budgets.
• Antenna Systems & Vendor Management: Act as the technical project lead for external antenna vendors. Define strict RF specifications and oversee the design, review, and acceptance testing of flight antennas.
• Antenna Integration & Testing: Direct the integration of antenna hats and execute comprehensive system-level RF testing. Validate antennas parameters and verify overall RF performance across the spacecraft bus.
• Execute comprehensive RF systems analysis across the full spacecraft bus, including EMI/EMC testing, RF desense evaluations, and characterization of non‑linear RF components.
• Model complex and dynamic systems, evaluate and develop new technologies, drive the qualification process of flight components. 

Qualifications 

Education:

Master's degree in Electrical Engineering or a related technical field.

Experience:

• A minimum of 5+ years in RF systems engineering, specifically focused on satellite payloads, TT&C, and/or GNSS subsystems.
• Deep theoretical and practical knowledge of RF/microwave engineering, applied electromagnetics, and transmission line theory.
• Specific expertise in GNSS receiver integration and L-band LNA requirements for active GNSS antennas.
• Strong background in spacecraft TT&C radio architectures and ground-to-space RF link dynamics.
• Proven track record managing RF hardware development cycles with external suppliers and defining strict test and qualification parameters. 

Preferred Qualifications:

• Experience mitigating RF interference (RFI) in dense, complex multi-transmitter spacecraft environments.
• Familiarity with environmental qualification standards for spaceflight RF hardware (TVAC, Vibe, EMI/EMC).
• Experience with satellite communication standards (e.g., CCSDS).
• Proven experience in technical supplier/vendor management.
• Proficiency in scripting languages (e.g., Python, MATLAB) for analysis and automation. 

Soft Skills:

• Adaptability & Resilience
• Proactive Problem-Solving
• High-Impact Communication
• Collaborative & Mission-Focused
• Commitment & Drive 

Technology Stack:

• HFSS and STK (preferred)
• Matlab, Python
• Linux, Docker
• Windows, Microsoft Office Suite 

Physical Requirements 

• Ability to work in a standard office environment and use a computer for extended periods.
• This position is based at our Lanham, MD or Midland, TX offices. While primarily on-site, the role requires the flexibility and ability to travel across the US and internationally to support key project milestones, vendor engagements, and on-site integration activities as needed.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking an Associate Software Engineer to join our Flight Software team. In this role, you will contribute to the development, integration, and testing of core software systems supporting satellite operations. You will work across embedded software development and Linux‑based system engineering, supporting both flight software and simulation environments that enable system validation and mission readiness.

This position is well‑suited for an early‑career engineer with strong fundamentals in embedded systems and an interest in space‑based platforms, who thrives in a collaborative and fast‑paced engineering environment. 

Key Responsibilities

• Design, develop, and test embedded software components from initial concept through integration and deployment
• Support software development for mission‑critical systems, including integration with simulation and test environments
• Collaborate with cross‑functional teams to implement new features and enhancements across multiple subsystems
• Contribute to system‑level architecture discussions by reviewing interface documentation and technical specifications
• Participate in debugging, validation, and performance analysis of software across development and test stages
• Support integration, test, and verification activities throughout the software lifecycle
• Follow modern software development workflows, including version control, testing, and continuous integration 

Qualifications

Education

Bachelor’s degree in Computer Engineering, Computer Science, Electrical Engineering, or a related technical field 

Experience

A minimum of 1–3 years of experience in software development, embedded systems, or related engineering roles (internships and academic project experience may count toward this requirement) 

Preferred Qualifications

• Experience with embedded development on microcontroller‑based systems
• Familiarity with real‑time operating systems (RTOS)
• Exposure to Linux system administration or Linux‑based development environments
• Experience supporting integration, test, or validation activities
• Familiarity with build systems and automation tools (e.g., CMake, Make, Ninja)
• Experience working with continuous integration tools or automated testing frameworks

Soft Skills

• Strong interpersonal and collaboration skills, with the ability to work effectively in cross‑functional teams
• Excellent written and verbal communication skills, including the ability to clarify requirements and share technical updates
• Meticulous attention to detail to ensure accuracy in code, documentation, and deliverables
• Strong problem‑solving and analytical skills in complex technical environments
• Ability to manage multiple tasks and meet deadlines in a dynamic setting 

Technology Stack

• Programming Languages: C, C++, Python
• Embedded Systems & RTOS environments
• Linux operating systems and command‑line tooling
• Version control and workflow tools (e.g., Git, issue tracking systems)
• Debugging and development tools (e.g., hardware debugging interfaces, test equipment)
• Software development lifecycle tools supporting testing and continuous integration 

Physical Requirements

• Ability to work in a standard office or lab environment and use a computer for extended periods
• Ability to participate in hands‑on development or test activities as needed
• May occasionally require work in lab or integration environments with standard engineering equipment

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking an experienced Electrical Engineer to join our team. This role involves working closely with senior engineers to design and test electrical harnesses for satellites and associated ground support equipment. The ideal candidate is detail-oriented, collaborative, and eager to contribute to cutting-edge aerospace projects. 

Key Responsibilities

• Collaborate with engineering teams to design, test, and support the integration of electrical harnesses for spacecraft and ground systems.
• Create detailed electrical schematics, select wiring, connectors, back shells, and other harness components, ensuring compliance with company and industry standards.
• Develop and execute test plans to verify functionality, reliability, and performance of electrical harness systems.
• Conduct thorough testing and validation procedures, analyze test data, and troubleshoot issues to meet design requirements.
• Prepare comprehensive technical documentation, including interface control documents, system schematics, block diagrams, harness drawings, and installation procedures.
• Work closely with multidisciplinary teams (power, RF, command and data handling, and other subsystems) to ensure seamless integration of electrical systems. 

Qualifications 

Education:

Bachelor’s degree in electrical engineering, Mechanical Engineering, or a related field. 

Experience:

A minimum of 2 to 5 years of industry experience. 

Preferred Qualifications

• Knowledge of space environment and industry standards.
• Understanding of harness design principles, cable routing, shielding, and EMI/EMC considerations.
• Proficiency in CAD software for harness design (e.g., Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics).
• Experience with electrical simulation and analysis tools (e.g., SPICE, MATLAB).
• Prior experience in electrical harness design through internships, co-op programs, or academic projects related to aerospace engineering. 

Soft Skills

• Strong interpersonal skills and ability to collaborate effectively within cross-functional teams.
• Excellent written and verbal communication skills.
• Analytical mindset with strong problem-solving and troubleshooting abilities.
• Ability to think critically, propose creative solutions, and adapt to evolving project requirements.
• Meticulous attention to detail to ensure accuracy in documentation and design. 

Technology Stack

• CAD tools: Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics.
• Electrical simulation tools: SPICE, MATLAB.
• Familiarity with schematic capture tools.

Physical Requirements

• Ability to work in a standard office environment and use a computer for extended periods.
• Occasional hands-on work with hardware in lab environments.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking an Electrical Software Test Engineer to join our Software Validation and Testing Team. In this role, you will support component level and spacecraft level testing, working across multiple AST engineering divisions. You will collaborate closely with software developers and internal engineering teams to assist in the development, testing, and deployment of vehicle software using hardware in the loop (HIL) and software in the loop (SIL) testing techniques. This is an excellent opportunity for an engineer passionate about electrical systems, testing, and spacecraft operations.

Key Responsibilities

• Execute tests on component level and spacecraft level platforms.
• Document test results, including post processing data and generating test reports.
• Support investigations of test failures, anomalies, and root cause analysis.
• Assist in developing test plans, procedures, and documentation.
• Serve as the onsite electrical engineering representative during testing activities.
• Ensure safe and effective use of Electrical Ground Support Equipment (EGSE).
• Track project deliverables and support test team coordination.
• Provide technical guidance and uphold industry best practices.
• Collaborate with systems, electrical, and software engineers to support integrated operations and resolve issues.

Qualifications

Education

Bachelor’s degree in Engineering or a related field, preferably Electrical Engineering or Computer Engineering.

Experience

• A minimum of 2+ years of experience in electrical testing and software validation.
• Experience with environmental testing and spaceflight hardware.
• Experience programming in C/C++ and Python.
• Proficiency with electrical test tools such as oscilloscopes, logic analyzers, multimeters, and DC power supplies.
• Ability to read and analyze electrical schematics and circuit diagrams.
• Comfort with version control systems, preferably Git.
• Familiarity with command line tools and working in Linux or Windows environments.
• Excellent written and verbal communication skills.

Preferred Qualifications

• Experience in RF engineering.
• Understanding of HIL/SIL testing concepts.
• Ability to design simple PCBs for testing or engineering tasks.
• Familiarity with systems engineering verification and validation principles.
• Experience with MATLAB/Simulink.
• Experience with Speedgoat, dSPACE, or similar testing platforms.
• Familiarity with environmental health and safety requirements.
• Knowledge of grounding and ESD procedures.
• Experience working in lab and cleanroom environments.

Soft Skills

• Strong interpersonal skills with the ability to collaborate effectively in cross functional teams.
• Excellent written and verbal communication skills.
• High attention to detail, ensuring accuracy in test execution, documentation, and reporting.
• Strong analytical problem-solving abilities.
• Ability to manage multiple priorities in a fast-paced engineering environment.
• Self-motivated and eager to learn new tools and testing techniques.

Technology Stack

• Programming: C/C++, Python
• Tools & Equipment: Oscilloscopes, logic analyzers, multimeters, DC power supplies
• Platforms: Linux, Windows
• Version Control: Git
• Additional Tools (preferred): MATLAB, Simulink, Speedgoat, dSPACE

Physical Requirements

• Ability to work in standard office, laboratory, and test facility environments.
• Ability to use computers, engineering tools, and test equipment for extended periods.
• Ability to follow safety protocols when working with spacecraft hardware, electrical systems, and lab equipment.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

As an Electrical and Power System Engineer, you will have the unique opportunity to contribute to the development of our next generation of satellites which will be even larger, more powerful, and more advanced than their predecessors. You will be part of a cross-functional team of talented engineers that owns the full development and operations cycle of the satellite electrical and power systems. The responsibilities of the team span a wide range of activities from requirements specification and architecture development up to post launch data reviews and anomaly investigations.

Duties and Responsibilities:

• Develop and maintain unit- and subsystem-level technical requirements.
• Lead trade studies, architecture development, and interface definition at the unit and subsystem level.
• Support detailed design activities, including creation and review of schematics, layouts, drawings, and bills of materials.
• Perform electrical and power analyses including power integrity (PI), transient analysis, worst-case circuit, derating, voltage drop, and grounding analyses.
• Perform DC, AC, and transient power integrity analysis (IR drop, impedance targets, load steps, resonances).
• Optimize decoupling strategies (bulk, ceramic, embedded capacitance) across frequency domains.
• Define and execute PDN validation plans (impedance measurement, load-step testing, noise analysis)
• Plan and lead unit- and subsystem-level acceptance and qualification testing, including test plan development, EGSE definition, test execution oversight, and test report generation.
• Lead failure investigations and support root-cause analysis during testing and operations.
• Conduct on-orbit data reviews and support anomaly investigation and resolution.

Basic Qualifications

• Bachelor’s degree in electrical engineering with strong academic performance.
• Familiarity with electrical power system components such as batteries, solar panels, harness, and power control and distribution units.
• Legally authorized to work in the US without employer sponsorship
• Excellent communication abilities, both written and verbal.
• Strong analytical and problem-solving skills.
• Familiarity with satellite power systems and space mission requirements.
• Familiarity with PDN simulation tools as Keysight PIPro, Cadence Sigrity, Ansys SIwave, SPICE
• 2+ years of experience leading a team or technical project.

Preferred Skills and Experience

• 3-7 years of experience in power systems design and development, with a focus on space or aerospace applications preferred.
• Master’s degree or PhD in Electrical Engineering, with emphasis on Power Electronics.
• Experience with LEO satellite power systems or similar space missions. 

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking an Associate Electrical Engineer to join our team. This role involves working closely with senior engineers to design and test electrical harnesses for satellites and associated ground support equipment. The ideal candidate is detail-oriented, collaborative, and eager to contribute to cutting-edge aerospace projects. 

Key Responsibilities

• Collaborate with engineering teams to design, test, and support the integration of electrical harnesses for spacecraft and ground systems.
• Create detailed electrical schematics, select wiring, connectors, back shells, and other harness components, ensuring compliance with company and industry standards.
• Develop and execute test plans to verify functionality, reliability, and performance of electrical harness systems.
• Conduct thorough testing and validation procedures, analyze test data, and troubleshoot issues to meet design requirements.
• Prepare comprehensive technical documentation, including interface control documents, system schematics, block diagrams, harness drawings, and installation procedures.
• Work closely with multidisciplinary teams (power, RF, command and data handling, and other subsystems) to ensure seamless integration of electrical systems. 

Qualifications 

Education:

Bachelor’s degree in electrical engineering, Mechanical Engineering, or a related field. 

Experience:

A minimum of 0–2 years of industry experience or recent graduate with hands-on project experience. 

Preferred Qualifications

• Knowledge of space environment and industry standards.
• Understanding of harness design principles, cable routing, shielding, and EMI/EMC considerations.
• Proficiency in CAD software for harness design (e.g., Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics).
• Experience with electrical simulation and analysis tools (e.g., SPICE, MATLAB).
• Prior experience in electrical harness design through internships, co-op programs, or academic projects related to aerospace engineering. 

Soft Skills

• Strong interpersonal skills and ability to collaborate effectively within cross-functional teams.
• Excellent written and verbal communication skills.
• Analytical mindset with strong problem-solving and troubleshooting abilities.
• Ability to think critically, propose creative solutions, and adapt to evolving project requirements.
• Meticulous attention to detail to ensure accuracy in documentation and design. 

Technology Stack

• CAD tools: Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics.
• Electrical simulation tools: SPICE, MATLAB.
• Familiarity with schematic capture tools.

Physical Requirements

• Ability to work in a standard office environment and use a computer for extended periods.
• Occasional hands-on work with hardware in lab environments.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking an Associate Electrical Software Engineer to join our Software Validation and Testing Team. In this role, you will support component‑level and spacecraft‑level testing across multiple AST engineering divisions. You will work closely with software developers and engineering teams to assist in the development, testing, and deployment of vehicle software, using both hardware‑in‑the‑loop (HIL) and software‑in‑the‑loop (SIL) environments. This position is ideal for an engineer eager to grow their skills across electrical systems, software testing, and integrated spacecraft operations.

Key Responsibilities

• Execute and support testing activities on component‑level and spacecraft‑level platforms.
• Document test results, including post‑processing data and generating test reports.
• Support investigations into test failures, anomalies, and root‑cause analysis.
• Assist in developing test plans, procedures, and related documentation.
• Serve as the on‑site electrical engineering representative during testing activities.
• Ensure proper, safe, and effective use of Electrical Ground Support Equipment (EGSE).
• Track project deliverables and support team coordination.
• Provide technical guidance and help maintain industry best practices across the team.
• Collaborate with systems, electrical, and software engineers to support integrated operations and issue resolution.

Qualifications

Education

Bachelor’s degree in Engineering or a related technical field, preferably Electrical Engineering or Computer Engineering. 

Experience

• A minimum of 1–3 years of relevant engineering experience (internships or co‑ops may count toward experience).
• Experience with environmental testing or spaceflight hardware is highly valued.
• Experience programming in C/C++ and Python.
• Experience using electrical and diagnostic tools such as oscilloscopes, logic analyzers, multimeters, and DC power supplies.
• Experience reading and interpreting circuit diagrams and schematics.
• Familiarity with version control systems (preferably Git).
• Comfort using command‑line tools in Linux or Windows environments.
• Excellent written and verbal communication skills.

Preferred Qualifications

• Understanding of Software‑in‑the‑Loop (SIL) and Hardware‑in‑the‑Loop (HIL) concepts.
• Ability to design simple PCBs for testing or custom hardware tasks.
• Familiarity with systems engineering verification and validation principles.
• Experience with MATLAB/Simulink.
• Experience with Speedgoat, dSPACE, or equivalent testing platforms.
• Knowledge of environmental health and safety requirements.
• Familiarity with grounding and ESD procedures.
• Experience working in lab or cleanroom environments.

Soft Skills

• Strong interpersonal skills and the ability to collaborate effectively within cross‑functional teams.
• Excellent written and verbal communication skills.
• Meticulous attention to detail to ensure accuracy in testing, documentation, and data reporting.
• Strong problem‑solving and analytical abilities.
• Ability to manage multiple tasks and support fast‑paced testing environments.
• Proactive mindset and willingness to learn new tools, techniques, and testing methods.

Technology Stack

• Programming: C/C++, Python
• Tools & Equipment: Oscilloscopes, logic analyzers, multimeters, DC power supplies
• Platforms: Linux and Windows
• Version Control: Git
• Additional Tools (preferred): MATLAB, Simulink, Speedgoat, dSPACE

Physical Requirements

• Ability to work in a standard office, lab, and test‑facility environment.
• Ability to use computers, engineering tools, and test equipment for extended periods.
• Ability to follow safety protocols, especially in lab and cleanroom settings.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Overview of Opportunity 

Join the Trusted Electronics & Effects business unit  of Two Six Technologies—where you’ll lead vulnerability research across hardware, software, and operational systems. Working side by side with engineers and security researchers, you’ll guide investigations, identify critical vulnerabilities, and develop countermeasures with operational impact. Our fast-growing roster of government customers relies on us to deliver advanced security solutions, and we’re looking for a Lead Vulnerability Researcher to provide technical leadership and mentorship.

This role requires regular on-site support at the Laurel, Maryland customer site.

What you will do:

• Lead the identification of vulnerabilities and attacks across hardware, software, personnel, logistics, procedures, and physical security.
• Develop proof of concept (PoC) code for identified vulnerabilities
• Reverse-engineer targeted embedded systems to identify vulnerabilities
• Review source code looking for risks and vulnerabilities
• Analyze the effects of vulnerabilities on mission outcomes and operational effectiveness.
• Compare system attack techniques and propose operationally effective countermeasures
• Produce reports, briefings, and perspectives on actual and potential attacks
• Provide technical leadership on research efforts, prioritizing investigations, reviewing methodologies, and overseeing proof-of-concepts.
• Mentor and guide junior engineers and researchers, reviewing technical approaches and fostering skill development.

What you will need (Basic Qualifications):

• Doctorate in Computer Science, Computer/Electrical Engineering, or a related field and 4 years of relevant experience, OR Master’s degree and 6 years of relevant experience, OR Bachelor’s degree and 8 years of relevant experience, OR Associate’s degree and 10 years of relevant experience.
• Relevant experience: computer/information systems design/development, programming, information/cyber/network security, reverse-engineering, vulnerability analysis, penetration testing, computer forensics, information assurance, or systems engineering
• Proficiency in C/C++, Python, and at least one ISA (e.g. x86/ARM/MIPS)
• Proficiency in Linux command-line environments
• Experience using a decompiler such as IDA Pro, Binary Ninja, or Ghidra
• Experience using vulnerability research tools such as emulators or fuzzers
• Experience using a software debugger such as GDB or WinDbg
• Ability to work on-site at Laurel, Maryland customer site regularly.

Nice If You Have (Preferred):

• Experience translating vulnerabilities into operationally relevant impact assessments and countermeasures.
• Experience producing client-facing technical briefings for operational stakeholders
• Experience using a hardware debugger
• Experience with UART, SPI, I2C
• Experience with common secure communications such as TLS or SSH 
• Familiarity with embedded firmware, RTOS, or networked systems
• Familiarity with high-side environments

Security Clearance:

• Active TS/SCI clearance with Polygraph required

#LI-JK1

#LI-ONSITE

Overview of Opportunity 

Join the Trusted Electronics & Effects business unit of Two Six Technologies, where you’ll provide strategic technical leadership in vulnerability research across hardware, software, and operational domains. Working alongside engineers, researchers, and clients, you’ll identify vulnerabilities, assess operational impacts, and develop effective countermeasures. Our fast-growing roster of government customers relies on us to deliver advanced security solutions, and we’re looking for a Principal Vulnerability Researcher to drive research programs and mentor technical teams.

This role requires regular on-site support at the Laurel, Maryland customer site.

What you will do:

• Lead the identification of vulnerabilities and attacks across hardware, software, personnel, logistics, procedures, and physical security, linking them to operational and mission impacts.
• Identify vulnerabilities and potential attacks across hardware, software, procedures, logistics, and physical security of systems
• Develop proof of concept (PoC) code for identified vulnerabilities
• Reverse-engineer targeted embedded systems to identify vulnerabilities
• Review source code looking for risks and vulnerabilities
• Analyze the effects of vulnerabilities on mission outcomes and operational effectiveness.
• Compare system attack techniques and propose operationally effective countermeasures
• Produce reports, briefings, and perspectives on actual and potential attacks
• Provide technical leadership on research efforts, prioritizing investigations, reviewing methodologies, and overseeing proof-of-concepts.
• Mentor and guide junior engineers and researchers, reviewing technical approaches and fostering skill development.

What you will need (Basic Qualifications):

• Doctorate in Computer Science, Computer/Electrical Engineering, or a related field and 7 years of relevant experience, OR Master’s degree and 9 years of relevant experience, OR Bachelor’s degree and 11 years of relevant experience, OR Associate’s degree and 13 years of relevant experience.
• Relevant experience: computer/information systems design/development, programming, information/cyber/network security, reverse-engineering, vulnerability analysis, penetration testing, computer forensics, information assurance, or systems engineering
• Proficiency in C/C++, Python, and at least one ISA (e.g. x86/ARM/MIPS)
• Proficiency in Linux command-line environments
• Experience using a decompiler such as IDA Pro, Binary Ninja, or Ghidra
• Experience using vulnerability research tools such as emulators or fuzzers
• Experience using a software debugger such as GDB or WinDbg
• Ability to work on-site at Laurel, Maryland customer site regularly.

Nice If You Have (Preferred):

• Experience translating vulnerabilities into operationally relevant impact assessments and countermeasures.
• Experience producing technical briefings for operational stakeholders
• Experience using a hardware debugger
• Experience with UART, SPI, I2C
• Experience with common secure communications such as TLS or SSH 
• Familiarity with embedded firmware, RTOS, or networked systems
• Familiarity with high-side environments

Security Clearance:

• Active TS/SCI clearance with Polygraph required

#LI-ZS1

#LI-ONSITE

We are looking for a Senior Mask Layout Engineer on the Fab Tapeout and Validation Team. As a Senior Mask Layout Engineer, you’ll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world’s best quantum computers to solve the world’s most complex problems. 

In this role, you will be the owner of full-reticle tapeouts for use in trapped-ion quantum computers, which could include both photonic and analog electronic layers. In addition, you will help develop and maintain the internal PDK and circuit layout libraries, as well as write scripts to automate the layout of masks for tapeouts. You will also have the opportunity to work closely with the photonic and ion trap design and testing teams to help develop new and game-changing quantum technology to enable scalable quantum computing, memory, and networking.

The Fab Tapeout and Validation Team is a remote-friendly team and this role can be performed remotely or in-person at IonQ’s College Park, MD or Bothell, WA campuses. 

Responsibilities:

• Conduct Python-based layout for full-reticle tapeouts with commercial foundries
• Develop and maintain internal component PCell and automated circuit layout libraries
• Interface with designers, test engineers, packaging engineers, and foundry team to define layout rules and component designs 
• Implement physical verification checks of layouts, including DRC and LVS
• Develop detailed documentation of tapeouts and lead layout reviews with other team members 
• Work with cross-functional teams to understand circuit requirements and make recommendations to improve design, layout, and test workflows

You’d be a good fit with:

• Bachelor’s degree in Photonics, Physics, Electrical Engineering, or related field, or equivalent practical experience
• Knowledge of semiconductor manufacturing processes and techniques
• Excellent programming and software skills, including development in an IDE, proficiency with version control software, shell scripting, and code documentation
• 2+ years of experience with Python-based mask layout software packages such as Luceda IPKISS, GDSFactory, or Klayout
  
  

You’d be a great fit with:

• M.S. or Ph.D. in Photonics, Physics, Electrical Engineering, or related field
• 5+ years experience in generating layout files for complex semiconductor flows with custom elements, such as MEMS, integrated photonics, or superconducting circuits
• Past ownership of full-reticle tapeouts with commercial foundries
• Experience with commercial simulation, verification, and layout environments such as Synopsys, Cadence, and Ansys
• Familiarity with photonic and/or analog electronic device principles including design, test, and fabrication
• Proficiency in physical verification including DRC, LVS, and ERC
• Experience with semiconductor and/or photonic workflows for tapeout with commercial foundries
• Excellent verbal and written communication skills
• A meticulous attention to detail and excellent track record of documenting requirements, implementation plan, and tracking progress
• Ability to work independently, prioritizing tasks and managing time effectively in a deadline-oriented environment

Location: The Fab Tapeout and Validation Team is a remote-friendly team and this role can be performed remotely or in-person at IonQ’s College Park, MD or Bothell, WA campuses. 
Travel: Up to 10%
Job ID: 1303

The approximate base salary range for this position is $110,336 - $144,459.  The total compensation package includes base, bonus, and equity.