What You’ll Do 

1. Contribute to the design, iteration, and qualification ofKatalyst’s spacecraft Electrical Power System (EPS), including power conversion, power distribution, battery interface electronics, solar array interfaces, protection circuitry, and subsystem power interfaces. 
2. Design,modify, and review schematics, PCB layouts, interface definitions, and analysis packages for spacecraft power electronics, with emphasis on switch-mode power supplies, DC/DC converters, load switching, current sensing, fault protection, and EMI-aware layout practices. 
3. Support integrated operation of EPS hardware during functional, performance, and qualification testing, working directly with test engineers to execute bench, thermal vacuum, vibration, and other qualification test campaigns.
4. Help own integrated functional testing of EPS hardware with avionics, flight software, mechanisms, payloads, and other spacecraft subsystems, ensuring power interfaces behave correctly across nominal, off-nominal, and fault cases.
5. Plan and execute targeted stress, margin, and performance testing, exercising hardware across design extremes such as input voltage range, load transients, thermal limits, startup sequencing, fault response, and converter stability.
6. Help define design changes and architecture improvements for future spacecraft power systems, including EPS feature upgrades, power budget impacts, redundancy considerations, telemetry needs, and mission-specific power requirements.

Your Ideal Background

1. Bachelor’s degree in electrical engineering or equivalent field.
2. 3+ years of experience designing, testing, or integrating power electronics, spacecraft EPS hardware, battery/solar power interfaces, or closely related high-reliability power systems.
3. Strong understanding of switch-mode power supply design, DC/DC converter architectures, compensation/stability, magneticsselection, protection circuitry, and practical power electronics debugging. 
4. Experience designing ormodifying schematics and PCB layouts for power electronics, including high-current routing, grounding, thermal considerations, creepage/clearance, current sensing, and EMI/EMC-aware layout practices. 
5. Proficiency in Altium or a similar ECAD tool for schematic capture, PCB layout review, design release, and documentation.
6. Exposure to spacecraft or embedded-system power architectures, including power distribution, load switching, battery management interfaces, solar array regulation, or power telemetry.
7. Exposure to common digital communication standards (SPI, I2C, UART, CAN, Ethernet) and mixed-signal design best practices for telemetry, control, and power-system interfaces.
8. Hands-on experience with hardware bring-up, bench testing, and debugging using oscilloscopes, electronic loads, power supplies, DMMs, logic analyzers, and related lab equipment.
9. Experience writing or executing test procedures, documenting results, and driving board- or component-level troubleshooting through root cause and corrective action.
10. Experience integrating power electronics with other spacecraft or embedded subsystems; exposure to environmental testing such as thermal vacuum or vibration is a plus but not required. 

Additional Requirements: Must be willing to work extended hours and weekends as needed.

Compensation and Benefits: Your base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The anticipated salary range for this role is $105,000 - $145,000 annually.

Base salary is just one part of your total rewards package at Katalyst. You will also be eligible for long-term incentives, in the form of the Employee Stock Option and Equity Plan, as well as a relocation bonus and other discretionary bonuses. You will also receive access to comprehensive medical, vision, and dental coverage, and unlimited Paid Time Off.

At Katalyst our work on projects involving the U.S. Department of Defense requires adherence to International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120-130, which requires compliance with U.S. export laws before allowing employees to perform certain positions. Currently, our available roles necessitate access to ITAR-controlled information, and as a result, Katalyst would have to ensure any non-US person is authorized access to ITAR information before the commencement of employment. We are committed to equal employment opportunities and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

We are seeking a talented Chief Building Engineer to join our property management team for a 930,000 square-foot Class A high-rise commercial property in Denver, Colorado.

The Chief Building Engineer acts as a lead team member for the assigned property(s), taking initiative with the highest level of professionalism, meeting the tenants’ needs, and having a commitment to achieving the goal of 100% uptime throughout the Engineering Team. The Chief Building Engineer is responsible for the operation and maintenance of mechanical, electrical, plumbing, and fire/life safety equipment and systems. The Chief Building Engineer directs, trains, and supports Building Engineers in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations.

Essential Responsibilities:

Budget

• In conjunction with property management team, develop, implement, and maintain annual repair & maintenance budget and long-range capital improvement plans.
• Work with the design team to develop safe, efficient, and effective projects that are within budget.
• Evaluate all costs associated with each project including materials, labor, and schedule.

Operations

• Oversee the operational aspects of the property in a manner that protects, maintains, and improves the value of the asset.
• Conduct regular evaluations of asset for property needs and recommends improvements as required.
• Develop and implement proactive strategies to resolve property operational and compliance-related challenges.
• Create, document, and implement ongoing preventive maintenance/repair programs with systems in place to record PM efforts.
• Maintain safety, cleanliness, and integrity of all areas of buildings (interior and exterior), systems, and equipment for all property users.
• Oversee the condition and preventive maintenance programs of key asset systems; HVAC and duct systems, fire protection/sprinkler systems, plumbing - sewer mains/clean out drains/structural building plumbing/sump pumps, vertical transportation, electrical equipment, etc.
• Perform regular site inspections to assess physical property condition, compliance and overall administration.
• Oversee the completion of annual building systems inspection/testing, maintenance (ITM) requirements.
• Oversee efforts for peak efficiency operation levels for all property components.
• Proactively manage insurance exposures at the property ensuring that all common areas throughout the asset are safe for public access.
• Respond to emergencies in a timely manner, requesting assistance as needed.
• Test, maintain, and restore to working order any component of the emergency systems used within the property.
• Ensure compliance with the emergency procedures in conjunction with local jurisdiction and property management guidelines.

Tenant Relations

• Work cooperatively with property management team to expedite the completion of landlord work, delivery of spaces to tenants and the opening of tenants for business.
• Maintain a helpful, courteous, and professional relationship with the tenants and their staff, using diplomacy in dealing with difficult tenants. Ensure the Engineering staff does the same.
• Ensure expeditious completion of all tenant maintenance requests and track accordingly.
• Ensure that tenants comply with lease requirements regarding preventive and ongoing maintenance (pest control, HVAC, exhaust/duct/hood cleaning, window cleaning, fire extinguishers, etc.)

Vendor and Capital Project Management

• Select contracted services by developing scopes of work, requesting bids, monitor performance per scopes of work and contractual agreements.
• Work to ensure projects stay on budget and within the projected time schedule.
• Monitor performance and take necessary action to ensure service providers meet or exceed expectations (security, landscaping, janitorial, etc.)
• Ensure ongoing compliance with applicable building, city/county and safety codes and regulations.

Staff Supervision and Motivation

• Effectively manage engineering team to include activities such as assigning work, providing supervision and direction as needed.
• Reinforce monthly staffing schedules, ensuring 24/7 emergency coverage.
• Manage ongoing staff development efforts and skill building/learning initiatives.

Qualifications:

• Can do initiative, solutions-oriented attitude, good communicator.
• Technical mechanical knowledge and proficiency.
• Ability to ascertain what repairs are most urgent in nature and prioritize.
• Minimum high school diploma or GED Equivalent.
• 10+ years related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting.
• Universal CFC certification required.
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, energy reduction techniques and operations.
• Knowledge of front-end Building Automations Systems.
• Thorough knowledge of all building systems operations, maintenance, and repair.
• Basic Computing Skills in Outlook, Excel & Word.

Physical Demands:

• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices.
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine.

Other:

• Must successfully complete background screening.

Base Salary Range:

$130,000 - $140,000 per year.

Other Compensation:

This role is eligible for an annual performance bonus.

CP Group is an Equal Opportunity Employer

YOUR MISSION

True Anomaly is seeking a talented and driven Electrical Engineer II to support the rapid design, development, and testing of high-reliability electrical systems for our spacecraft programs. In this role, you will execute across the full hardware development lifecycle — from requirements capture and schematic design through bring-up, integration, and production — while collaborating closely with cross-functional engineering teams. You will bring hands-on technical depth, a strong sense of ownership, and the initiative to contribute meaningfully from day one. 

RESPONSIBILITIES

• Execute requirements capture, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test for electrical designs 
• Support the rapid design, development, and testing of high-reliability electrical systems for spacecraft engineering and development efforts 
• Collaborate with system architecture development across cross-functional teams 
• Participate in preliminary and critical design reviews to support program requirements 
• Conduct derating analysis and worst-case circuit analysis 
• Support system-level integration of electrical subsystems, including hardware and software interfaces 
• Perform first article testing, unit-level testing, and production testing 
• Contribute to the development and execution of validation and qualification testing campaigns to ensure reliable hardware 
• Develop and maintain documentation for electrical systems and components, including design specifications, test plans, and operating procedures 
• Support hardware through production, integration, and launch 
• Collaborate with experts from other teams and departments to improve system efficiency, manufacturability, and reliability, and to ensure compliance with relevant industry standards and quality assurance processes 
• Contribute to continuous improvement of electrical engineering processes and practices 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field 
• 2-4 years of professional experience in electrical engineering 
• Proficiency with PCB design in Altium Designer or equivalent 
• Solid understanding of applicable codes and standards including PCB and PCBA design 
• Strong written and verbal communication skills 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or related field 
• Experience with spacecraft electrical system design and testing 
• Familiarity with spacecraft power systems, avionics, and communication subsystems 
• Knowledge of industry standards and regulations related to spacecraft electrical systems 
• Embedded firmware development experience 
• Experience with simulation tools such as SPICE, MATLAB, and Simulink 
• Knowledge of IPC standards and specifications including IPC-610, IPC J-STD-001, and other relevant PCB design and assembly standards 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $90,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

About the Role:

Samsara is looking for an experienced Technical Support Engineer to provide world-class hardware and software support experience to our customers. You will be a part of our Tier 2 support team within the umbrella of the Global Technical Support organization. You will resolve complex customer problems and improve support across all teams. Your work will be collaborative, working together with other support engineers in multiple support locations to serve our customers and troubleshoot complex issues.  

The ideal candidate will have a strong technical background, experience in a technical support role, proven customer-facing skills, and strong communication skills. You understand the day-to-day aspects of customer support, including managing tickets, building knowledge base articles, and providing product feedback to Engineering and PM teams. 

This is a remote role open to candidates residing in the US except the San Francisco Bay Metro Area, NYC Metro Area, and Washington, D.C. Metro Area. Relocation assistance will not be provided for this position. 

You should apply if:

• You want to impact the industries that run our world: Your efforts will result in real-world impact—helping to keep the lights on, get food into grocery stores, reduce emissions, and most importantly, ensure workers return home safely.
• You are the architect of your own career: If you put in the work, this role won’t be your last at Samsara. We set up our employees for success and have built a culture that encourages rapid career development, and countless opportunities to experiment and master your craft in a hyper-growth environment.
• You’re energized by our opportunity: The vision we have to digitize large sectors of the global economy requires your full focus and best efforts to bring forth creative, ambitious ideas for our customers.
• You want to be with the best: At Samsara, we win together, celebrate together and support each other. You will be surrounded by a high-caliber team that will encourage you to do your best. 

In this role, you will: 

• Product Expertise: Become an expert on Samsara’s product portfolio of complete Internet of Things (“IoT”) solutions combining hardware, software, and cloud to bring real-time visibility, analytics, and AI to operations across multiple industries.
• Technical Troubleshooting: Use your technical knowledge and product expertise to troubleshoot and resolve customer issues with medium to high complexity.
• Responsiveness & Resolution: Respond to customers and resolve their inquiries in a timely and helpful manner with a primary focus on meeting our SLA goals.
• Documentation: Partner with Enablement to author and maintain customer-facing knowledge base articles to help improve the self-serviceability for our end users.
• Partnerships: Work closely to develop partnerships with our Engineering and Product teams in order to reproduce bugs and build testbeds as necessary.
• Feedback Loop: Provide direct feedback to Support Management for product and process improvements to help enhance the customer experience.
• Team Player: Champion, role model, and embed Samsara’s cultural principles (Focus on Customer Success, Build for the Long Term, Adopt a Growth Mindset, Be Inclusive, Win as a Team) as we scale globally and across new offices.

Minimum requirements for the role:

• B.S. or equivalent work experience in Computer Science, Engineering (Mechanical/Electrical), Mathematics, Science, Business, or another analytical field.
• 2-5 years of experience in support, engineering, or other technical roles.
• Strong familiarity with using CRMs like Zendesk or Salesforce.
• Technical know-how - you’re comfortable interfacing with engineers, translating complex technical concepts into everyday language, and working with SaaS systems.
• Excellent customer service and interpersonal skills coupled with the ability to influence individual contributors and leaders across the company.
• Excellent written and verbal communication skills, you can speak both Engineer and Human.
• Strong bias for action, ability to dive deep, and insistence on the highest standards.
• Ability to work in a hyper-growth environment with shifting priorities.
• Willingness to work flexible hours with the possibility of rotating coverage for some nights, weekends, and holidays.

An ideal candidate also has:

• Experience with SaaS platform operations or you like tinkering with python, JSON, scripting, databases, or cloud systems. 
• Bilingual proficiency in English and Spanish

YOUR MISSION

We are revolutionizing spacecraft systems and are looking for a candidate with a passion for being hands-on and helping build new technologies. Our production engineers do what it takes to ensure production can keep building. You will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider. 

RESPONSIBILITIES

• Generate work instructions for mechanical and electrical assemblies 
• Supporting production operations as needed to ensure workflow stays uninterrupted.
• Generate NCR’s (non-compliance reports), support investigation through resolution, and own the execution of dispositions.
• Manage calibration and certification of mechanical and electrical GSE (ground support equipment).
• Provide technical and engineering assistance to team of technicians. 
• Complete process improvements and corrective actions to increase efficiency of production. 
• Provide manufacturing expertise to design engineering and contribute to documentation such as drawings, SOPs (standard operating procedures), etc.
• Create spacecraft assembly kits for rapid production. 

QUALIFICATIONS

• Bachelor's degree in manufacturing, industrial, mechanical, electrical engineering or related field  
• 2-4 years of experience for a level II or 4+ years of experience for a level III 
• Experience with PLM, MES, configuration and data management controls and systems.
• Experience working to AS9100 process and standards.
• Experience with working hands-on-hardware and fabrication methods
• Experience building and producing classified hardware in SCIF’s or SAP facilities.  

PREFERRED SKILLS AND EXPERIENCE

• Experience building space hardware including, but not limited to, fluid systems, structures, harnessing, or PCBAs

COMPENSATION

• Base Salary: 
  • Level 2: $75,000 - $120,000
  • Level 3: $90,000-$155,000 
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Clearance — Ability to maintain or obtain TS/SCI clearance.
• Work Location — this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Staff Electrical Engineer, you will be a senior technical leader responsible for driving avionics architecture decisions and owning the design, development, and delivery of flight-critical electronic assemblies for True Anomaly's spacecraft. You will shape how our avionics systems are defined, integrated, and proven — bridging board-level design with system-level thinking to deliver hardware that meets the demands of space. 

RESPONSIBILITIES

• Lead avionics architecture definition and trade studies, driving decisions on processing, data transport, power distribution, and redundancy that shape the spacecraft electrical system 
• Own the end-to-end design of complex electronic assemblies — from requirements capture, schematic design, and component selection through prototyping, bring-up, debugging, and release to production 
• Collaborate with system architecture development across cross-functional teams including software, GNC, propulsion, and systems engineering 
• Lead preliminary and critical design reviews for avionics subsystems, ensuring designs meet program requirements and spacecraft-level performance goals 
• Conduct and review derating analysis and worst-case circuit analysis for flight hardware 
• Define and drive interface control between avionics boards and other spacecraft subsystems, including power, RF, payloads, and harness 
• Perform system-level integration of avionics hardware and software, including embedded firmware interfaces and communication buses 
• Perform first article testing, unit-level testing, and production testing of avionics assemblies 
• Support hardware through production, integration, launch, and on-orbit commissioning 
• Define validation approaches and create development and qualification testing campaigns to exercise designs to their limits and ensure reliable hardware 
• Drive compliance with relevant industry standards, regulations, and quality assurance processes across the avionics subsystem 
• Develop and maintain documentation for avionics systems and components, including design specifications, interface control documents, test plans, and operating procedures 
• Mentor junior engineers to improve design skill sets and increase capabilities within the organization 
• Continuously improve electrical engineering processes and practices to drive innovation and efficiency 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field 
• Minimum 10 years of experience in electrical engineering 
• Demonstrated spacecraft flight heritage — experience designing, building, and delivering electronic hardware that has operated on orbit 
• Experience with embedded firmware development and hardware/firmware co-design 
• Advanced experience in PCB and PCBA design using Altium Designer or equivalent ECAD tools 
• Experience with system-level avionics architecture, including processing, power distribution, data interfaces, and redundancy schemes 
• Strong understanding of common spacecraft communication interfaces (RS-422/RS-485, SPI, I2C, SpaceWire, Ethernet) 
• Demonstrated ability to independently lead complex technical efforts and drive them to completion 
• Excellent communication and interpersonal skills 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or related field 
• Experience with FPGA SoC development and VHDL/Verilog 
• Familiarity with spacecraft power systems, propulsion interfaces, and communication subsystems 
• Experience with radiation-tolerant design practices and mitigation of radiation effects on COTS components 
• Knowledge of industry standards and regulations related to spacecraft electrical systems, including EEE-INST-002, GSFC-STD-7000 (GEVS), and MIL-STD-461 
• Experience with simulation tools such as SPICE, MATLAB, and Simulink 
• Experience with worst-case circuit analysis and derating analysis for space-grade hardware 
• Familiarity with configuration management and requirements traceability tools 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $175,000-$265,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

True Anomaly is seeking a talented and experienced Senior Electrical Engineer, Imager to join our Payloads team, reporting to the Electro-Optical Systems Engineering Manager. In this role, you will be the technical authority for the camera, focal plane, and sensing element design of our EO/IR imaging systems, spanning visible, near-IR, and infrared wavelength bands. You will own the full signal chain from photon collection through detector readout, data transfer, and electrical design — ensuring our imaging payloads deliver the performance, reliability, and affordability needed for operational spacecraft. You bring deep hands-on expertise in focal plane array technologies, detector electronics, and imaging system characterization, and you thrive in a fast-paced environment where you can take ownership and drive results from concept to on-orbit operation. 

RESPONSIBILITIES

• Lead the design, development, integration, and testing of camera systems and focal plane assemblies for visible, near-IR, and infrared imaging payloads 
• Own the electrical design of detector readout electronics, focal plane interface circuits, and associated analog and digital signal chains 
• Define and execute detector and focal plane characterization campaigns, including noise, responsivity, linearity, and dark current measurements 
• Design and optimize high-speed data transfer architectures from focal plane to downstream processing and storage 
• Develop and maintain image data management approaches, including on-board image storage, buffering, and downlink prioritization 
• Perform radiometric and electro-optical system modeling to predict and validate on-orbit imaging performance 
• Collaborate with optical, mechanical, and systems engineering teams to ensure seamless payload integration and performance compliance 
• Support integration and test activities, including environmental testing, calibration, and on-orbit commissioning 
• Develop and maintain documentation including design specifications, test plans, analysis reports, and operating procedures 
• Contribute to continuous improvement of EO engineering processes and practices 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Optical Engineering, Physics, or related field (Master's preferred) 
• 5+ years of professional experience in electro-optical system design with a focus on cameras, focal plane arrays, and detector electronics 
• Hands-on experience with visible, near-IR, and/or IR detector technologies (CCD, CMOS, InGaAs, MCT, or similar) 
• Experience with focal plane readout electronics, detector interface design, and analog signal chain development 
• Experience with high-speed digital data interfaces and image data transfer architectures 
• Strong understanding of radiometric analysis and electro-optical system performance modeling 
• Familiarity with SWaPC-constrained payload design for spacecraft applications 
• Excellent written and verbal communication skills 

PREFERRED SKILLS AND EXPERIENCE

• Experience with embedded firmware development for camera and focal plane control electronics 
• Experience developing test software for EO system characterization and validation 
• Familiarity with on-board memory management and image storage architectures 
• Experience with hyperspectral imaging sensor design, calibration, and data processing 
• Familiarity with space-qualified or radiation-tolerant detector and focal plane technologies 
• Experience with cryogenic or thermoelectric cooling systems for IR detector applications 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $150,000-$220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are seeking a highly motivated Test Engineer to support the design, planning, and execution of test campaigns for aerospace defense systems. You will work closely with engineers, program managers, and technical teams to ensure that systems meet performance, environmental, and mission-critical requirements. In this role, you will develop test plans, execute tests, collect data, analyze results, and ensure that the systems meet all specifications. The position offers an excellent opportunity to contribute to cutting-edge aerospace technologies in a fast-paced, mission-driven environment.

RESPONSIBILITIES

• Support or lead the planning, setup, execution, and documentation of component- and system-level tests across mechanical, electrical, and environmental domains 
• Develop, review, and maintain test procedures, plans, reports, and data packages aligned with engineering requirements and program needs 
• Execute test procedures, collect and validate test data, and ensure adherence to safety, quality, and configuration control standards 
• Analyze test results, document anomalies, and support root cause investigations in collaboration with cross-functional teams 
• Coordinate with design, systems, manufacturing, and quality teams to ensure tests align with verification and validation requirements 
• Prepare for and participate in test readiness reviews, pre-test briefings, and post-test debriefs 
• Maintain organized test documentation to support internal, customer, and audit reviews 
• Contribute to continuous improvement of test methodologies, tooling, automation, and data analysis practices 

QUALIFICATIONS

• Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field 
• Test Engineer I: Bachelor’s degree with 0–1 years of academic or industry experience in a test, validation, or lab environment 
• Test Engineer II: Bachelor’s degree with 2–4+ years of hands-on test engineering experience within the aerospace or defense industry, or a Master’s degree with relevant experience 
• Demonstrated proficiency in, or strong interest in developing expertise across, test planning, execution, and post-test analysis using modern tools and methods 
• Working knowledge of test equipment, instrumentation, data acquisition systems, and test scription or automation 
• Strong attention to detail and ability to follow defined processes and safety protocols 
• Proficiency with Microsoft Office; ability to learn test management and data analysis tools 
• Strong documentation and communication skills 
• U.S. Citizenship required due to government contracts 

PREFERRED SKILLS AND EXPERIENCE

• Experience with environmental testing (vibration, thermal, shock, TVAC, EMI/EMC) 
• Strong technical writing and report generation skills 
• Familiarity with aerospace and defense test standards (e.g., MIL-STD-810, DO-160) 
• Hands-on experience with lab instrumentation, sensors, and DAQ systems 
• Experience with data analysis or automation tools such as LabVIEW, MATLAB, or Python 
• Exposure to failure investigations, root cause analysis, and non-conformance tracking 
• Active DoD clearance or ability to obtain one 

COMPENSATION

• Test Engineer I Base Salary: $70,000-$110,000
• Test Engineer II Base Salary: $80,000-$130,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location— this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are seeking a Staff or Principle Systems Engineer to join our team as a Lead Systems Engineer (LSE) in developing and integrating cutting-edge aerospace and defense systems. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. The Lead Systems Engineer (LSE) has ownership and responsibility over the requirements, verification, and validation (RV&V) efforts. The LSE is responsible for execution of day-to-day SE process, integration of MBSE and requirements tools, and leads gate review execution activities. The LSE oversees the daily activities, tasking, and prioritization of activities of program Systems Engineers. The LSE is for leading RV&V efforts, including requirements definition, decomposition, verification, and validation products. This includes products required to perform validation and verification not allocated to other teams, such as Test Plans. The LSE is responsible for guiding interface definition and leads mission and vehicle level gating reviews. The LSE has approving authority with the Chief Engineer for accepting hardware for vehicle integration. The LSE leads or delegates authority for Engineering Review Boards (ERB) and Failure Review Boards (FRBs).

RESPONSIBILITIES

The Systems Engineering team supports multiple programs and disciplines. We are seeking talented, flexible engineers with varying skillsets. In addition to the roles above, as a member of this team, you may:

• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Prepare detailed technical reports, presentations, and documentation for internal and external stakeholders, including government agencies and customers.
• Develop system-level integration and verification plans, conducting end-to-end testing to validate mission requirements.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Conduct system performance analysis, including reliability, safety, and mission effectiveness, under various environmental conditions.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Identify and analyze mission risks related to complex space missions, including collision risks and operational uncertainties.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution.

QUALIFICATIONS

• Staff level: 12+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Principal level: 15+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Strong technical leadership and systems architecture experience
• Proven leadership in design, analysis, and verification on a major aerospace program 
• Strong analytical and communication skills, with ability to lead technical trades 
• Demonstrated ability to balance technical rigor with schedule and program realities 
• Strong systems engineering and technical leadership background across mechanical, electrical, and software domains 
• Strong background in systems engineering practices: requirements, verification, trade studies, interface control, and failure analysis
• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary Staff : $155,000-$300,000
• Base Salary Principal: $155,000- $315,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

True Anomaly is seeking a highly accomplished Chief Engineer to lead the technical execution of a next-generation space vehicle program. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. You will serve as the top technical authority for the vehicle, accountable for engineering performance, risk management, and system integration. You will lead multi-disciplinary teams through design, development, analysis, test, and fielding phases while ensuring the vehicle architecture, requirements, and design decisions align with system-level objectives and mission success criteria. You must impedance match rigor and analysis depth to the maturity and risk posture of the program. You will drive design and technical readiness reviews, technical baseline management, and design assurance.

RESPONSIBILITIES

The Chief Engineer is part of the Systems Engineering team. In addition to the responsibilities above, as a member of this team, you will:

• Have ownership over the technical baseline for the program
• Be accountable for program technical budgets
• Assists program manager in scope, cost, and schedule decisions
• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution.

QUALIFICATIONS

• 15+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Strong technical leadership and systems architecture experience
• Proven leadership in design, analysis, and verification on a major aerospace program 
• Strong analytical and communication skills, with ability to lead technical trades 
• Demonstrated ability to balance technical rigor with schedule and program realities 
• Strong systems engineering and technical leadership background across mechanical, electrical, and software domains 
• Strong background in systems engineering practices: requirements, verification, trade studies, interface control, and failure analysis
• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary:  $210,000-$355,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a senior to principal-level technical leader, to architect spacecraft-wide harness solutions that span multiple programs, teams, and vehicle configurations. You will define the standards, conventions, and automation strategies that enable rapid, reliable harness design and integration across the organization. You are accountable for program-level delivery outcomes — not just the quality of individual designs, but the consistency, scalability, and velocity of harness engineering across True Anomaly's portfolio. You will build reusable patterns and tooling that multiply the effectiveness of every harness engineer on the team, coach engineers across organizational boundaries, and shape cross-org alignment on technical direction. This role requires someone who thinks in systems, builds for scale, and leads through influence rather than authority.

RESPONSIBILITIES

• Architect spacecraft-wide electrical harness standards and interface conventions across programs; ensure consistent application of grounding, shielding, EMC isolation, and signal integrity practices at the vehicle level for all programs and vehicle lines.
• Define spacecraft-level routing rules and mechanical interface standards that integrate harness layouts across full spacecraft configurations, including deployable and multi-module assemblies that resolve competing constraints across thermal, mechanical, electromagnetic, and operational domains.
• Oversee supply chain and manufacturability strategies for flight harnesses; collaborate with procurement and manufacturing to ensure part availability, cost efficiency, and production scalability.
• Define corporate design-for-manufacture philosophies and reliability standards for harness assemblies; collaborate with industry suppliers on material innovation, process improvement, and next-generation connector and cabling technologies to standardize harness build and verification processes across programs.
• Ensure cross-discipline consistency in standards and configurations across electrical, mechanical, thermal, and avionics domains; serve as the integrating authority for harness-related interfaces.
• Create automation tools for rapid harness design and validation — reducing manual effort, catching errors earlier, and enabling faster iteration across the design cycle.
• Build reusable design patterns and scalable solutions that become organizational assets; codify durable practices that outlast individual programs.
• Shape company narratives on harness engineering direction and technical investment; influence executive leadership on strategic priorities, technology bets, and organizational capability development.
• Coach and mentor developing harness engineers across teams; build collaboration across organizational boundaries and grow the next generation of senior technical talent.
• Embed True Anomaly's values into cross-org delivery practices; serve as a visible role model for trust, accountability, and principled engineering judgment while setting the cultural tone for how teams collaborate and hold themselves accountable.
• Anticipate architectural trade-offs before they become problems; proactively identify risks across programs and drive mitigation strategies that protect schedule and mission assurance across programs.
• Shape the leadership bench for harness engineering; grow senior technical talent, define career development pathways, and influence enterprise engineering culture through visible leadership and principled decision-making.

QUALIFICATIONS

• Bachelor's degree in electrical, mechanical, or related engineering discipline; advanced degree preferred.
• 8+ years of professional experience in spacecraft or aerospace harness engineering, with demonstrated progression into multi-program architectural leadership.
• Proven track record of defining spacecraft-wide harness standards, interface conventions, or design automation tools adopted across multiple programs or vehicle lines.
• Deep expertise in EMI/EMC, grounding architecture, signal integrity, and system-level verification strategies for flight harness systems.
• Experience architecting harness layouts that integrate across full spacecraft configurations, including complex routing, multi-module assemblies, and deployable elements.
• Demonstrated accountability for program-level delivery outcomes spanning multiple teams and workstreams.
• Experience defining or standardizing verification and validation processes, reliability standards, or derating guidelines used across an organization.
• Track record of building reusable tooling, templates, or automation that measurably improved design velocity or quality across teams.
• Experience overseeing supply chain and manufacturability strategies for flight harness hardware.
• Strong ability to coordinate across teams, influence without authority, and shape technical alignment in cross-organizational settings.
• Experience coaching and developing engineers at multiple career levels; demonstrated investment in growing senior technical talent.
• Excellent written and verbal communication skills, including experience shaping cross-org alignment and maintaining composure and clarity under program pressure and influencing executive leadership on technical strategy, investment priorities, and organizational direction.
• Willing to travel up to 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience developing harness design automation tools or workflows (e.g., scripted routing validation, automated BOM generation, CAD-integrated design rule checking).
• Experience with SolidWorks Electrical and Routing and/or NX/Teamcenter at the multi-program or enterprise level.
• Familiarity with Model-Based Systems Engineering (MBSE) approaches for managing harness interfaces and configurations at scale.
• Experience leading or defining spacecraft-level EMC qualification campaigns across multiple vehicle programs.
• Hands-on experience establishing or governing approved parts lists, materials standards, or corporate design guidelines for harness assemblies.
• Experience contributing to industry standards bodies or working groups related to spacecraft harnessing, EMC, or electrical integration (e.g., IPC, SAE, AIAA).
• Prior involvement in mission assurance boards, design certification reviews, or flight readiness processes at the program level.
• Experience shaping engineering culture, onboarding practices, or technical mentorship programs within a growing organization.

COMPENSATION

• Base Salary Senior: $135,000-$220,000
• Base Salary Staff: $155,000- $265,000
• Base Salary Principal: $180,000- $310,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Centennial or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 4+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

• III Base Salary: $105,000 - $170,000
• Senior Base Salary: $135,000 - $220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

RESPONSIBILITIES

• Own all aspects of Guidance, Navigation, and Control (GNC) system development for missile systems, including architecture definition, algorithm design, verification, hardware integration, flight test support, and operational deployment.
• Design, test, and validate GNC flight software and embedded algorithms for missiles operating across multiple flight regimes and environmental conditions.
• Develop and maintain navigation and state estimation algorithms, including sensor fusion frameworks (e.g., EKF, UKF, particle filters) integrating IMU, GPS/INS, seeker data, and other sensor modalities to provide high-rate, high-accuracy state estimates throughout the engagement timeline.
• Develop guidance laws (proportional navigation, augmented PN, optimal guidance) and autopilot designs; implement them in flight software; verify performance and robustness through high-fidelity 6-DOF simulation, Monte Carlo analysis, hardware-in-the-loop testing, and flight test correlation.
• Design, implement, and maintain high-fidelity simulation environments capturing aerodynamics, propulsion, atmospheric effects, target dynamics, sensor models, and actuator dynamics for SIL, HIL, and mission analysis across the full flight envelope.
• Utilize frequency-domain and time-domain control analysis techniques to ensure stability margins.
• Develop terminal guidance algorithms for intercept of maneuvering targets, including target tracking, aimpoint selection, miss distance prediction, time-to-go estimation, and endgame steering logic.

QUALIFICATIONS

• Bachelor's degree in aerospace engineering, mechanical engineering, electrical engineering, physics, or related field
• 5+ years of relevant GNC engineering experience in the aerospace and defense industry, preferably with tactical missile systems, interceptors, or guided munitions
• Coursework or project experience in flight dynamics, aerodynamics, control systems, and state estimation
• Strong understanding of physics, rigid body dynamics, intercept geometry, proportional navigation, and real-time software development principles
• Experience with C++ and/or Python for algorithm development, numerical methods, real-time control, or simulation
• Familiarity with missile GNC concepts including guidance laws, autopilot design, sensor fusion, inertial navigation, seeker operation, and aerodynamic/thrust vector control
• Exposure to filtering and estimation methods (e.g., Kalman filters, complementary filters, INS/GPS integration) through internships, coursework, or projects
• Ability to build, test, and debug flight software, real-time control systems, and simulation tools
• Strong analytical skills with emphasis on dynamics, controls, and numerical methods; ability to work effectively in a fast-paced, multidisciplinary engineering environment
• Demonstrated ability to take ownership of complex technical problems and drive solutions from concept through flight test
• Ability to obtain and maintain TS/SCI US government security clearance

PREFERRED SKILLS AND EXPERIENCE

• Master's degree or PhD in aerospace engineering, control systems, or equivalent discipline
• Experience with terminal guidance algorithms, proportional navigation variants, optimal guidance theory, or modern guidance techniques
• Experience developing autopilot designs for agile missiles including gain scheduling, adaptive control, or nonlinear control methods
• Experience with INS/GPS integration, sensor calibration, alignment algorithms, and error budget analysis
• Experience with aerodynamic modeling, CFD correlation to flight data, or aeroservoelastic analysis
• Experience developing and executing hardware-in-the-loop test campaigns with flight representative GNC hardware
• Flight test experience including test planning, instrumentation selection, telemetry analysis, and flight data reconstruction
• Experience with intercept kinematics, target tracking, miss distance analysis, and covariance propagation
• Experience performing line-of-sight stability analysis including jitter, noise rejection, and seeker tracking performance
• Hands-on experience with GNC hardware integration, sensor characterization, and actuator calibration
• Familiarity with missile-specific tools and standards (e.g., MISSILE DATCOM, MIL-STD-1553, MIL-STD-1760)
• Active TS/SCI clearance with Polygraph

COMPENSATION

• Base Salary: $115,000 - $290,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite position, Successful candidates will be located near Denver, CO or Long Beach, CA 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.

#LI-Onsite

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 2+ years of professional experience with harnessing design and routing.
• Ability to maintain or obtain TS//SCI Clearance
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software.
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

• Base Salary: $85,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 2+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

•  Base Salary: $85,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a member of the Applied Algorithms and Autonomy team, you will design, build, and deploy core autonomy capabilities for True Anomaly. You will work with a talented cross-functional team to advance technology at the intersection of artificial intelligence, machine learning, and classical optimization. This will involve hands-on development across various areas including vehicle autonomy, mission planning, wargaming, threat assessment, and uncooperative RPO capabilities. You are a first principles engineer who takes ownership of the systems you build and delivers results. 

RESPONSIBILITIES

• Design, implement, and test algorithms that enable autonomous mission planning, tasking, and decision-making 
• Contribute to autonomy architecture discussions and implement robust solutions informed by statistical analysis, software testing, and hardware-in-the-loop simulation 
• Collaborate with cross-functional teams to translate requirements and stakeholder expectations into production-ready autonomy solutions 
• Debug and tune autonomy systems through integration, testing, and deployment in real-world operational environments 
• Write clean, well-documented, and testable code in support of autonomy capabilities 

QUALIFICATIONS

• Bachelor's degree in computer science, robotics, aerospace engineering, electrical engineering, or a similar discipline 
• Proficient in C/C++ and Python 
• Strong understanding of at least one of technologies within the four pillars: 
  • Adversarial planning: classical game theory, self-play, counterfactual regret minimization, Monte Carlo tree search, behavior trees, etc. 
  • Classical optimization: MPC, trajectory optimization, dynamic programming, stochastic control, mixed integer programming, quadratic programming, etc. 
  • ML/AI: reinforcement learning, imitation learning, transformer architectures, anomaly detection, classification/regression, behavior modeling, etc. 
  • Multi-Agent Control: multi-agent coordination, consensus algorithms, networked control systems, communication-aware planning, fault detection & isolation 
• Solid foundation in statistics, optimization, and decision-making under uncertainty 
• 4+ years of experience implementing algorithms to support autonomous planning and decision-making deployed in real-world systems 
• Demonstrated ability to work in a multidisciplinary team and solve complex problems with first principles approaches 
• Passion for spaceflight and advancing capabilities related to space domain awareness and space security 

PREFERRED SKILLS AND EXPERIENCE

• Master's or PhD in computer science, robotics, aerospace engineering, electrical engineering, or a similar discipline 
• Experience writing high-reliability, production C/C++ code 
• Experience with edge computing and real-time processing constraints 
• Experience with space systems (orbital mechanics, GNC, spacecraft operations) 
• Familiarity with probabilistic reasoning, state estimation (EKF/UKF, particle filters), and planning under uncertainty 
• Background in verification/validation of autonomous systems for certification or operational deployment 
• A understanding of how game theory, optimization and AI can be fused together.

COMPENSATION

• Base Salary: $170,000 - $290,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is a fully onsite role. Candidates must be based in or able to commute to our Denver or Long Beach office daily.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

True Anomaly is looking for a creative Thermal Engineer at the Senior or Staff level to develop new spacecraft. In this role you will be work with a multi-disciplinary product team to rapidly develop and produce new space systems. 

RESPONSIBILITIES

• Work with a product focused team including mechanical, electrical, software, and automation engineers to rapidly develop revolutionary thermal designs 
• Perform integrated thermal analysis to determine heater/radiator sizing and external coatings required to maintain all elements of the SV in thermal limits 
• Perform thermal detailed analysis over variety of design reference missions (DRM’s) 
• Design and help develop detail piece part and assembly drawings for heaters, MLI, and other thermal control components 
• Assist with electronic thermal predictions and board level analysis 
• Coordinate thermal interfaces between subsystems 
• Support Thermal Vacuum and Thermal Cycle testing 
• Support on orbit operations 

QUALIFICATIONS

• Bachelor’s degree in mechanical engineering with training in analysis of structures and fluids 
• 6+ years of professional experience in space thermal analysis and control 
• Demonstrated excellence in thermal vacuum testing, analysis and model correlation 
• Thermal experience with spacecraft subcomponents such as optical payloads, mechanisms, structures, etc.  
• Proficiency in tools such as Thermal Desktop and Solidworks 
• Passion for the space industry 
• Demonstrated ability to work in a multidisciplinary team 
• Demonstrated ability to work autonomously with little input on requirements or management oversight 
• Excellent written and verbal communication skills 
• Strong Desire to be accountable to day to day tasks, own mistakes, and drive balanced solutions to closure through sound technical solutions and a sense of urgency
• Strong Willingness to go above and beyond to achieve team success through task execution and collaboration

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in aerospace 

COMPENSATION

• Base Salaries: 
  • Senior Thermal Engineer: $130,000-$210,000
  • Staff Thermal Engineer: $130,000-$260,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location— This role is onsite at our Centennial location. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Hybrid

YOUR MISSION

True Anomaly is looking for a creative Thermal Engineer to develop new spacecraft. In this role you will be work with a multi-disciplinary product team to rapidly develop and produce new space systems. 

RESPONSIBILITIES

• Work with a product focused team including mechanical, electrical, software, and automation engineers to rapidly develop revolutionary thermal designs 
• Perform integrated thermal analysis to determine heater/radiator sizing and external coatings required to maintain all elements of the SV in thermal limits 
• Perform thermal detailed analysis over variety of design reference missions (DRM’s) 
• Design and help develop detail piece part and assembly drawings for heaters, MLI, and other thermal control components 
• Assist with electronic board level thermal analysis 
• Coordinate thermal interfaces between subsystems 
• Support Thermal Vacuum and Thermal Cycle testing 
• Support on orbit operations 

QUALIFICATIONS

• Bachelor’s degree in mechanical engineering or equivalent 
• 2+ years of professional experience in space thermal analysis and design 
• Demonstrated excellence in thermal vacuum testing and model correlation 
• Thermal experience with spacecraft subcomponents such as optical payloads, mechanisms, structures, etc.  
• Experience in tools such as Thermal Desktop and Solidworks 
• Demonstrated ability to work in a multidisciplinary team 
• Excellent written and verbal communication skills 
• Strong Desire to be accountable to day to day tasks, own mistakes, and drive balanced solutions to closure through sound technical solutions and a sense of urgency 
• Strong Willingness to go above and beyond to achieve team success through task execution and collaboration 

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in aerospace 
• Demonstrated ability to work autonomously with little input on requirements or management oversight 
• 5+ years of experience in development and production of space thermal systems 

COMPENSATION

• Base Salaries:
  • Thermal Engineer II: $85,000-$135,000
  • Thermal Engineer III: $105,000-$170,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be fully onsite at our GravityWorks factory in Centennial, CO
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION
As a Principal Flight Software Engineer at True Anomaly, you will serve as a technical authority across the full spacecraft software stack, shaping architecture decisions, setting engineering standards, and driving the development of flight software from concept through on-orbit operations. You will own hard problems, influence program-level direction, and raise the technical bar for the team around you. If you are looking for a role where your decisions have real consequences in space, this is it.

RESPONSIBILITIES

• Own the architecture and technical direction of flight software for space missions, including on-board computers, processing units, and associated systems
• Lead the design and development of robust, safety-critical embedded software with a focus on long-term maintainability and mission reliability
• Drive integration of complex GNC algorithms with flight software, collaborating closely with the GNC team to ensure correctness and performance
• Define and maintain the Command Telemetry Database (CTDB) architecture to support ground and on-orbit test and operations
• Establish and enforce software engineering standards including coding practices, design patterns, and verification and validation approaches
• Partner with the ground C2 software team to align interfaces, data flows, and operational concepts across the full system
• Architect and lead development of HITL and SITL simulation environments for subsystem and full-vehicle testing
• Design and own reusable device driver and communications protocol libraries across flight hardware platforms
• Serve as a key technical voice in design reviews, architecture discussions, and cross-functional planning

YOUR MISSION

As a Staff Flight Software Engineer at True Anomaly, you will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider. 

RESPONSIBILITIES

• Assist in the software development cycle including design, development, integration, and test for flight computers used in space missions (on-board computers, processing units and others)
• Integrate complex GNC algorithms with flight software
• Assist with the Command Telemetry Database (CDTB) definition and maintenance for ground and on-orbit test and mission
• Collaborate with the ground C2 software team
• Assist with the effort for command scripting and sequencing of the Spacecraft
• Assist with design and implement satellite subsystem model simulators on HITL/SITL environment
• Develop reusable device drivers/interfaces and communications protocol libraries for flight hardware 

BASIC QUALIFICATIONS

• Bachelor's degree in computer science, electrical engineering, computer engineering, or related field and 6+ years of experience with low-level firmware architecture, design, and development
• Low-level device driver development and safety critical systems experience
• Experience with embedded RTOS such as RTLinux or Azure RTOS
• Familiarity with common protocols such as Ethernet, SPI, I2C, CAN, RS422, RS485, etc.
• Proficiency in C/C++ and Python. 
• Ability to maintain or obtain TS/SCI clearance 

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in in computer science, electrical engineering, computer engineering, or related field
• 12+ years experience developing and/or producing FSW for space applications
• Ability to maintain or obtain TS/SCI clearance
• Demonstrated experience and discipline with version control, continuous integration, and continuous delivery concepts
• Familiarity with embedded Linux
• Familiarity with networking protocols: UDP, TCP/IP
• Comfortable with typical embedded systems tools, compilers, debuggers and IDEs
• Broad experience with microcontrollers, application processors, revision control systems
• Strong debugging skills through use of instrumentation such as oscilloscopes and protocol analyzers
• Application experience in areas such as robotics, automation, motor control, and sensor fusion 

COMPENSATION

• Base Salary: $165,000 - $290,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite role, we are seeking candidates based near Denver, CO or Long Beach, CA. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.
#LI-Onsite

YOUR MISSION

As a Senior Flight Software Engineer at True Anomaly, you will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider. 

RESPONSIBILITIES

• Assist in the software development cycle including design, development, integration, and test for flight computers used in space missions (on-board computers, processing units and others)
• Integrate complex GNC algorithms with flight software
• Assist with the Command Telemetry Database (CDTB) definition and maintenance for ground and on-orbit test and mission
• Collaborate with the ground C2 software team
• Assist with the effort for command scripting and sequencing of the Spacecraft
• Assist with design and implement satellite subsystem model simulators on HITL/SITL environment
• Develop reusable device drivers/interfaces and communications protocol libraries for flight hardware 

BASIC QUALIFICATIONS

• Bachelor's degree in computer science, electrical engineering, computer engineering, or related field and 6+ years of experience with low-level firmware architecture, design, and development
• Low-level device driver development and safety critical systems experience
• Experience with embedded RTOS such as RTLinux or Azure RTOS
• Familiarity with common protocols such as Ethernet, SPI, I2C, CAN, RS422, RS485, etc.
• Proficiency in C/C++ and Python. 
• Ability to maintain or obtain TS/SCI clearance 

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in in computer science, electrical engineering, computer engineering, or related field
• 7+ years experience developing and/or producing FSW for space applications
• Ability to maintain or obtain TS/SCI clearance
• Demonstrated experience and discipline with version control, continuous integration, and continuous delivery concepts
• Familiarity with embedded Linux
• Familiarity with networking protocols: UDP, TCP/IP
• Comfortable with typical embedded systems tools, compilers, debuggers and IDEs
• Broad experience with microcontrollers, application processors, revision control systems
• Strong debugging skills through use of instrumentation such as oscilloscopes and protocol analyzers
• Application experience in areas such as robotics, automation, motor control, and sensor fusion 

COMPENSATION

• Base Salary: $140,000 - $250,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite role, we are seeking candidates based near Denver, CO or Long Beach, CA. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.
#LI-Onsite

YOUR MISSION

As a Flight Software Engineer III at True Anomaly, you will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider.

RESPONSIBILITIES

• Lead portions of the software development cycle including design, development, integration, and test for flight computers used in space missions (on-board computers, processing units and others)
• Integrate complex GNC algorithms with flight software
• Own and maintain the Command Telemetry Database (CDTB) definition for ground and on-orbit test and mission
• Collaborate with and provide technical guidance to the ground C2 software team
• Lead command scripting and sequencing efforts for the Spacecraft
• Design and implement satellite subsystem model simulators on HITL/SITL environment
• Develop and maintain reusable device drivers/interfaces and communications protocol libraries for flight hardware
• Conduct code reviews and mentor junior engineers on flight software best practices
• Contribute to flight software architecture decisions and technical trade studies

BASIC QUALIFICATIONS

• Bachelor's degree in computer science, electrical engineering, computer engineering, or related field
• 4 to 7 years of experience with low-level firmware architecture, design, and development
• Low-level device driver development and safety critical systems experience
• Experience with embedded RTOS such as RTLinux or Azure RTOS
• Familiarity with common protocols such as Ethernet, SPI, I2C, CAN, RS422, RS485, etc.
• Familiarity with networking protocols: UDP, TCP/IP
• Proficiency in C/C++ and Python
• Ability to maintain or obtain TS/SCI clearance

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in computer science, electrical engineering, computer engineering, or related field
• 4 - 7 years experience developing and/or producing FSW for space applications
• Demonstrated experience and discipline with version control, continuous integration, and continuous delivery concepts
• Familiarity with embedded Linux
• Comfortable with typical embedded systems tools, compilers, debuggers and IDEs
• Broad experience with microcontrollers, application processors, revision control systems
• Strong debugging skills through use of instrumentation such as oscilloscopes and protocol analyzers
• Application experience in areas such as robotics, automation, motor control, and sensor fusion
• Experience mentoring or leading small technical teams

COMPENSATION

• Base Salary: $115,000 - $190,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite role, we are seeking candidates based near Denver, CO or Long Beach, CA.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. 

#LI-Onsite

YOUR MISSION

As a Flight Software Engineer II at True Anomaly, you will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider.

RESPONSIBILITIES

• Contribute to the software development cycle including design, development, integration, and test for flight computers used in space missions (on-board computers, processing units and others)
• Integrate complex GNC algorithms with flight software
• Contribute to the Command Telemetry Database (CDTB) definition and maintenance for ground and on-orbit test and mission
• Collaborate with the ground C2 software team
• Contribute to command scripting and sequencing of the Spacecraft
• Design and implement satellite subsystem model simulators on HITL/SITL environment
• Develop reusable device drivers/interfaces and communications protocol libraries for flight hardware
• Participate in code reviews and contribute to flight software architecture discussions

BASIC QUALIFICATIONS

• Bachelor's degree in computer science, electrical engineering, computer engineering, or related field
• 2 to 4 years of experience with low-level firmware architecture, design, and development
• Low-level device driver development and safety critical systems experience
• Experience with embedded RTOS such as RTLinux or Azure RTOS
• Familiarity with common protocols such as Ethernet, SPI, I2C, CAN, RS422, RS485, etc.
• Familiarity with networking protocols: UDP, TCP/IP
• Proficiency in C/C++ and at least one of the following: Rust, Zig, or Python
• Ability to maintain or obtain TS/SCI clearance

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in computer science, electrical engineering, computer engineering, or related field
• 2 - 4 years experience developing and/or producing FSW for space applications
• Demonstrated experience and discipline with version control, continuous integration, and continuous delivery concepts
• Familiarity with embedded Linux
• Comfortable with typical embedded systems tools, compilers, debuggers and IDEs
• Broad experience with microcontrollers, application processors, revision control systems
• Strong debugging skills through use of instrumentation such as oscilloscopes and protocol analyzers
• Application experience in areas such as robotics, automation, motor control, and sensor fusion

COMPENSATION

• Base Salary: $90,000 - $155,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite role, we are seeking candidates based near Denver, CO or Long Beach, CA.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. 

#LI-Onsite

YOUR MISSION

As a Flight Software Engineer at True Anomaly, you will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider. 

RESPONSIBILITIES

• Assist in the software development cycle including design, development, integration, and test for flight computers used in space missions (on-board computers, processing units and others)
• Integrate complex GNC algorithms with flight software
• Assist with the Command Telemetry Database (CDTB) definition and maintenance for ground and on-orbit test and mission
• Collaborate with the ground C2 software team
• Assist with the effort for command scripting and sequencing of the Spacecraft
• Assist with design and implement satellite subsystem model simulators on HITL/SITL environment
• Develop reusable device drivers/interfaces and communications protocol libraries for flight hardware

BASIC QUALIFICATIONS

• Bachelor's degree in computer science, electrical engineering, computer engineering, or related field
• 0 to 2 years of experience with low-level firmware architecture, design, and development
• Low-level device driver development and safety critical systems experience
• Experience with embedded RTOS such as RTLinux or Azure RTOS
• Familiarity with common protocols such as Ethernet, SPI, I2C, CAN, RS422, RS485, etc.
• Familiarity with networking protocols: UDP, TCP/IP 
• Proficiency in C/C++, Rust, and Zig

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in in computer science, electrical engineering, computer engineering, or related field
• 0 - 2 years experience developing and/or producing FSW for space applications
• Ability to maintain or obtain TS/SCI clearance
• Demonstrated experience and discipline with version control, continuous integration, and continuous delivery concepts
• Familiarity with embedded Linux
• Familiarity with networking protocols: UDP, TCP/IP
• Comfortable with typical embedded systems tools, compilers, debuggers and IDEs
• Broad experience with microcontrollers, application processors, revision control systems
• Strong debugging skills through use of instrumentation such as oscilloscopes and protocol analyzers
• Application experience in areas such as robotics, automation, motor control, and sensor fusion

COMPENSATION

• Base Salary: $75,000 - $125,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite role, we are seeking candidates based near Denver, CO or Long Beach, CA. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.
#LI-Onsite

YOUR MISSION 

RESPONSIBILITIES 

True Anomaly is seeking a highly accomplished Chief Engineer, Host Vehicle to lead the technical execution of a next-generation missile defense program. This is a generational opportunity to architect a solution to some of the most challenging mission sets in missile defense, not to mention aerospace engineering as a whole. You will serve as the top technical authority for the host vehicle, accountable for engineering performance, risk management, and system integration. You will lead multi-disciplinary teams through design, development, analysis, test, and fielding phases while ensuring the vehicle architecture, requirements, and design decisions align with system-level objectives and mission success criteria. You must impedance match rigor and analysis depth to the maturity and risk posture of the program. Finally you will drive design and technical readiness reviews, technical baseline management, and design assurance. 

QUALIFICATIONS 

Required Qualifications & Experience 

• 10+ years of of proven experience delivering a major aerospace subsystem or vehicle from concept through delivery/fielding 

• Demonstrated ability to balance technical rigor with schedule and program realities 
• Strong systems engineering and technical leadership background across mechanical, electrical, and software domains 
• Strong background in systems engineering practices: requirements, verification, trade studies, interface control, and failure analysis

• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries

• Bachelors Degree in Mechanical or Aerospace Engineering, Robotics, or related field. Master’s or Ph.D. preferred
• U.S. Citizen and eligible for DoD Secret

Desired Qualifications & Experience 

• Advanced degree in Aerospace, Mechanical, or Systems Engineering

• Experience with missile defense or space vehicle programs

• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles
• TS/SCI clearance

COMPENSATION  

• Base Salary:  $210,000-$355,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Colorado Springs. While we observe a hybrid work environment, some work must be done on site.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Hybrid

Position Overview

Woolpert is hiring a Program Director for the Mission Critical team. The Program Director must be a licensed Architect or Engineer and is primarily responsible for sales and growth within the Mission Critical practice area through the establishment and improvement of client relationships. This position is also responsible for working across practice areas and service lines to develop business opportunities and ensure services are performed in a manner compatible with the goal of being an industry leader. This position reports to Mission Critical Market Director.  

We are unable to provide visa sponsorship for this position. Applicants must already possess work authorization in the country the job is located.     #LI-SN1

What You Will Do:

Business Development  

• Build and enhance existing client relationships to identify and initiate additional project opportunities within a client base for the service line, practice area and firm. 
• Identify and build new client relationships that match the client and project type focus and overall business strategy of the service line and practice area. 
• Promote SNHA (a Woolpert company) as an industry leader for specified market/practice and service(s) with new and existing clients. 
• Early project feasibility and strategic design input. 
• Collaborate with the MC Market Director and Building Sector Leader to define the EU market sales goals. 

Collaboration and support 

• Mentor and assist project managers in negotiating project schedules, fees, scope and contract terms.  
• Work with Project Managers to identify, address and resolve any project issues impacting client goals, objectives and/or client satisfaction.   
• Define and communicate client needs and expectations. 
• Ensure continuous stakeholder (client, client’s manager, etc.) communications addressing, resolving, and anticipating project issues. 

What You Will Bring:

Qualifications and Experience 

• BA/BS or MA/MS in Architecture, Mechanical Engineering, Civil Engineering, Electrical Engineering or similar field of study required. 
• 15 or more years of related experience in the Mission Critical Datacenter industry
• Current Professional Registration  
• Office 365: Word, Excel, Teams, SharePoint, Outlook, PowerPoint, basic AutoCad and Bluebeam (Essential). 
• Ability to travel within reason to meet the needs and demands of the practice area 

General Aptitude 

• Ability to make sound decisions/recommendations based on the evaluation and synthesis of information and data. 
• Demonstrates an enterprising, innovative, proactive management approach. 
• Possesses high levels of demonstrated leadership ability. 
• Ability to research and define multiple project scopes, schedules, and budgets. 
• Ability to establish and maintain rapport with clients, vendors, management and employees. 
• Possesses strong negotiation and problem-solving skills.  
• Possesses excellent facilitation and/or meeting skills.  
• Possesses excellent presentation and communication (oral and written) skills. 
• Strong understanding of project management and ability to facilitate technical discussions when needed.  
• Strong organizational skills to successfully manage multiple, competing priorities.
• Engaging with good interpersonal skills.

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

HERE'S WHAT YOU'LL DO

HERE'S WHAT YOU'LL NEED

• Minimum of 6 years of related experience required.
• Current PE in the United States required.
• LEED accreditation preferred.
• Must be an independent thinker, analytical, contributes to process development
• Must possess working knowledge and experience, while still acquiring higher level knowledge.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required.

YOUR MISSION

As a Staff RF Electrical Engineer at True Anomaly, you will define the architecture for full spacecraft RF systems and be accountable for program-level communication system outcomes across multiple teams. You will develop reusable engineering tools and standards, drive cross-organizational alignment, and serve as a technical coach who builds the next generation of RF engineers at True Anomaly.

RESPONSIBILITIES

• Define architecture for full spacecraft RF systems; establish design and performance standards across programs
• Develop system-level RF performance tools, analysis models, and standard methodologies used across the organization
• Establish standardized RF test methods; resolve cross-system EMI/EMC issues that span multiple subsystems or programs
• Optimize RF architectures at the system level; inform and lead complex trade studies
• Run multi-stream RF projects; coordinate across engineering teams to deliver program-level outcomes
• Provide technical mentorship and coaching to engineers across teams; develop durable engineering practices
• Shape cross-organizational technical alignment; communicate clearly under pressure and ambiguity
• Support subcontracts and supplier development through design, development, and procurement efforts
• Embed True Anomaly's engineering values into cross-org delivery; serve as a visible role model for technical excellence and accountability

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field (Master's or PhD preferred)
• 10–14 years of experience in RF system design and development for aerospace applications
• Demonstrated experience defining RF system/payload architectures for spacecraft programs.
• Deep expertise in link budget analysis, antenna systems, EMC/EMI, and space communication protocols
• Experience leading multi-team technical programs and driving cross-functional delivery
• Advanced proficiency in RF simulation and analysis tools
• Strong leadership and communication skills; ability to influence and align without direct authority

PREFERRED SKILLS AND EXPERIENCE

• Experience with S/X/Ka-Band communications systems for space applications
• Expertise in satellite communication link optimization and technology trades
• Experience with software-defined radios (SDRs) at the system architecture level
• Experience with regulatory spectrum filing and frequency coordination
• Experience with RF missile defense applications
• Familiarity with encryption algorithms (NSA Type 1 preferred)
• Track record of developing junior and mid-level engineers into senior contributors
• Experience in a startup or high-growth aerospace environment

COMPENSATION

• Base Salary: $200,000 - $310,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near our Centennial or Long Beach locations. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Principal RF Electrical Engineer at True Anomaly, you will set the functional RF architecture strategy for the company and be accountable for enterprise-wide technical decisions across all spacecraft communication systems. You will shape the long-term technical direction of the RF discipline, influence company leadership, grow senior engineering talent, and represent True Anomaly's capabilities externally to customers, partners, and the broader aerospace community.

RESPONSIBILITIES

• Architect multi-mission RF systems across S/X/Ka-Band and other frequency regimes; ensure end-to-end link margin and performance robustness across the enterprise
• Define mission communication architectures; validate end-to-end RF system performance at program and enterprise levels
• Oversee mission-level RF verification and payload qualification across multiple concurrent programs
• Define corporate EMI/EMC strategy; engage with regulatory bodies and spectrum authorities on behalf of True Anomaly
• Set the long-term communication system strategy and link design philosophy across all programs
• Shapes company RF technical narratives; influence executives and senior leadership on strategic technical pursuits
• Grow and shape the senior RF engineering talent pipeline; mentor staff and senior engineers into leadership roles
• Drive transformative solutions that establish new RF capabilities at the company level
• Define enterprise delivery standards and drive consistent outcomes across the RF organization
• Serve as an external representative for True Anomaly's RF capabilities at industry forums, with customers, and with partners
• Embody and scale True Anomaly's engineering values company-wide; set the cultural and technical tone for the RF discipline

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field (Master's or PhD strongly preferred)
• 14+ years of progressive RF engineering experience, including significant experience in spacecraft or space-borne communication systems
• Demonstrated track record of architecting and delivering multi-mission, multi-band RF communication systems in space or missile defense applications
• Deep expertise across the full RF engineering stack: component expertise, subsystem architecture, link analysis, EMI/EMC, test and qualification
• Experience engaging with regulatory bodies, spectrum authorities, or standards organizations
• Proven ability to influence at the executive level and drive enterprise-wide technical strategy
• Strong track record of growing and developing senior engineering talent

PREFERRED SKILLS AND EXPERIENCE

• Experience with classified space communication systems and NSA Type 1 encryption
• Expertise in satellite communication link optimization and technology trades
• Awareness of key technology progression across the industry as it pertains to forward looking implementation and strategy
• Experience with regulatory filing committees and ITU/FCC spectrum coordination processes
• Publications, patents, or conference presentations in RF/microwave engineering or space communications
• Experience in a high-growth aerospace startup environment
• Record of external industry influence through panels, working groups, or advisory roles

COMPENSATION

• Base Salary: $175,000 - $265,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near our Centennial, CO or Long Beach, CA locations. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is seeking a talented and driven Senior Electrical Engineering Systems Engineer to lead cross-domain systems engineering across our avionics, RF communications, and electrical power subsystems. Reporting to the Director of Avionics, you will own the systems engineering discipline that ties these domains together — driving requirements decomposition, interface definition, integration planning, and verification strategy across the full spacecraft avionics architecture. You will represent the Avionics Components team in design reviews and customer engagements, translating complex multi-discipline technical challenges into clear decisions and actionable plans. 

RESPONSIBILITIES

• Own requirements decomposition and flow-down across avionics, RF, and electrical power subsystems, ensuring traceability from customer and program-level requirements to component specifications 
• Develop, maintain, and negotiate interface control documents (ICDs) between avionics subsystems and broader spacecraft systems, including software, GNC, propulsion, and payloads 
• Lead cross-domain integration planning across digital systems, FPGA, EPS, RF communications disciplines to ensure architectural coherence and minimize interface risk 
• Drive technical and programmatic trade studies that span avionics subsystem boundaries, synthesizing inputs from power, RF, and digital teams to produce clear recommendations with supporting analysis 
• Lead and participate in design reviews (SRR, PDR, CDR) as the avionics systems engineering representative, presenting architecture, interface, and verification status to internal stakeholders and customers 
• Interpret and adjudicate customer specifications, identifying areas of risk, ambiguity, or non-compliance and driving resolution with engineering and program stakeholders 
• Develop and maintain the avionics verification and validation strategy, ensuring requirements are verifiable and mapped to appropriate test or analysis methods 
• Collaborate with EPS engineers on power budget development, distribution architecture trades, and power system interface definition 
• Collaborate with RF engineers on link budget assumptions, antenna interface requirements, and communications system integration planning 
• Support sprint planning, milestone tracking, and schedule development in coordination with the Program Office, keeping the Avionics Components team on track and dependencies visible 
• Identify and track technical and programmatic risks across the avionics domain, driving mitigation plans in collaboration with subsystem leads and the Program Office 
• Develop and maintain avionics program documentation including technical plans, schedules, review packages, and status reports 
• Mentor junior engineers in systems engineering practices, requirements discipline, and cross-functional problem solving 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or related field 
• 5–10 years of professional experience in systems engineering, avionics engineering, or a related technical discipline 
• Demonstrated experience with requirements decomposition, flow-down, and traceability management for electrical or avionics systems 
• Experience developing and managing interface control documents across complex, multi-discipline hardware programs 
• Strong electrical engineering fundamentals with the ability to engage credibly with engineers across EPS, RF communications, digital systems, FPGA, and harness disciplines 
• Experience supporting or leading design reviews (SRR, PDR, CDR) with internal and external stakeholders 
• Exceptional written and verbal communication skills, with demonstrated ability to convey technical information clearly to both engineering and program management audiences 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering, Systems Engineering, or related field 
• Experience with spacecraft avionics architectures including flight computers, EPS, RF communications, and harness design 
• Familiarity with spacecraft power system design, power budgeting, and distribution architectures 
• Familiarity with RF communications system design, link budgets, and antenna integration 
• Experience with model-based systems engineering (MBSE) tools such as Cameo, Rhapsody, or similar 
• Familiarity with requirements management tools such as DOORS, Jama, or Confluence 
• Experience working directly with government or defense customers and interpreting military or defense acquisition specifications 
• Familiarity with agile development methodologies applied to hardware engineering programs 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $150,000-$220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

True Anomaly is seeking a talented and experienced Motor Control Engineer at the Mid-career or Senior level to join our Mechanisms team, reporting to the Mechanisms Engineering Manager. In this role, you will own both the drive electronics hardware and the embedded firmware for precision motor-driven actuation systems on our orbital platforms. You will design and develop custom motor drive circuits, closed-loop servo control algorithms, and the embedded software that ties them together — delivering vertically integrated solutions built for the demanding thermal, radiation, and reliability requirements of spaceflight. You bring equal depth in hardware and firmware, thrive in a hands-on environment, and take pride in seeing your work perform on-orbit. 

RESPONSIBILITIES

• Design and develop motor drive electronics for brushless DC and stepper motor systems, including gate driver circuits, current sensing, power stage design, and EMI mitigation 
• Develop and implement embedded firmware for closed-loop motor control, including FOC/BLDC commutation algorithms, PID and advanced control loops, and fault detection and handling 
• Perform motor and drive system characterization, including torque-speed profiling, efficiency mapping, and thermal analysis 
• Collaborate closely with the GNC team to develop and validate closed-loop pointing, stabilization, and tracking control for precision actuation applications 
• Define and execute motor drive hardware bring-up, integration, and qualification test campaigns 
• Support system-level integration of motor control electronics and firmware with spacecraft avionics and flight software 
• Develop and maintain design documentation including schematics, firmware architecture, test plans, and analysis reports 
• Contribute to component selection, trade studies, and design reviews across the mechanisms product portfolio 
• Mentor junior engineers and contribute to continuous improvement of mechanisms engineering processes and practices 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Computer Engineering, or related field (Master's preferred) 
• 5+ years of professional experience in motor control system design, with demonstrated depth in both drive electronics hardware and embedded firmware 
• Experience with brushless DC and/or stepper motor drive circuit design, including power stage, gate driver, and current sensing topologies 
• Experience implementing closed-loop motor control algorithms including FOC, BLDC commutation, and PID-based servo control in embedded firmware 
• Proficiency in embedded C or C++ for real-time motor control applications 
• Familiarity with common embedded communication interfaces (SPI, I2C, UART, CAN) and their application in motor drive systems 
• Experience with hardware bring-up, debug, and characterization using lab test equipment 
• Excellent written and verbal communication skills 

PREFERRED SKILLS AND EXPERIENCE

• Experience with space-qualified or high-reliability motor drive electronics for vacuum and radiation environments 
• Familiarity with precision pointing or tracking system requirements and GNC interface design 
• Experience with motor control using DSPs, FPGAs, or microcontrollers (STM32, TI C2000, or similar) 
• Knowledge of magnetic bearing or brushless motor design and winding analysis 
• Experience with thermal analysis and thermal management of power electronics in SWaP-constrained designs 
• Familiarity with applicable aerospace standards (MIL-STD-704, MIL-STD-461, EEE-INST-002) 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salaries:
  • Mechanisms Engineer III: $115,000-$170,000
  • Senior Mechanisms Engineer: $150,000-$220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

As an Electrical Engineer II, Radio Frequency (RF) at True Anomaly, you will build upon your foundational skills by supporting RF system design across our ground and space hardware. You will be responsible for RF components within an established architecture. You will contribute reliably to spacecraft communication programs, collaborate actively with your team and other subsystem teams.

RESPONSIBILITIES

• Design, specify, and evaluate moderate-complexity RF components within the overall system architecture, with guidance as needed
• Perform applicable analyses including link budgets, antenna pattern evaluations, compatibility, and others as needed.
• Develop and execute test plans for RF modules; perform evaluations and data assessment
• Collaborate with mechanical, software, power, and thermal engineering teams; understand cross-discipline dependencies
• Communicate proactively within the team on status, risks, and findings
• Support documentation efforts for RF component designs and test results
• Identify process improvements that contribute to team efficiency
• Actively support peers and share knowledge across the team

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field
• 2–4 years of experience in RF engineering for aerospace or related applications
• Demonstrated ability to design or evaluate RF components such as LNAs, amplifiers, and passive networks
• Experience performing link budget analysis and interpreting RF test data
• Hands-on experience with RF test equipment (network analyzers, spectrum analyzers, signal generators)
• Strong collaborative and communication skills

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or related field
• Experience with RF simulation tools (MATLAB, HFSS, FEKO, CST, or similar)
• Familiarity with space communication protocols (CCSDS or similar)
• Exposure to EMI/EMC requirements and test methods
• Experience in a startup or fast-paced engineering environment

COMPENSATION

• Base Salary: $90,000 - $135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Centennial, CO or Long Beach, CA.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is seeking a talented and driven Electrical Engineering Systems Engineer at the Senior or Mid-career level to serve as the primary technical and programmatic interface between our Avionics Components engineering team and the Program Office. You will be the connective tissue that keeps vertically integrated avionics development aligned, on schedule, and delivering against program and customer requirements. You will own requirements decomposition and flow-down across avionics subsystems, drive ICD development, lead technical and programmatic trade studies, and represent Avionics Components team interests in wider engineering forums. You bring strong electrical engineering fundamentals, systems thinking, and the organizational discipline to keep complex, multi-discipline hardware programs moving with clarity and confidence. This is a high-visibility role that directly shapes how the Avionics team executes and grows. 

RESPONSIBILITIES

• Own requirements decomposition and flow-down across the Avionics Components engineering team, ensuring traceability from customer and program-level requirements to subsystem and component specifications 
• Develop, maintain, and negotiate interface control documents (ICDs) between avionics subsystems and broader spacecraft systems, including power, software, RF, and payloads 
• Serve as the primary interface between the Avionics Components team and the Program Office, translating technical status, risks, and needs into clear programmatic communication 
• Interpret and adjudicate customer specifications, identifying areas of risk, ambiguity, or non-compliance and driving resolution with engineering and program stakeholders 
• Lead technical and programmatic trade studies across avionics subsystems, synthesizing inputs from EPS, digital systems, FPGA, RF, and harness teams to produce clear recommendations 
• Facilitate sprint planning, milestone tracking, and schedule development in coordination with the Program Office, keeping the Avionics Components team on track and dependencies visible 
• Assist the Avionics Components team leadership in roadmap planning, ensuring near-term deliverables and long-term development priorities are clearly defined and resourced 
• Represent Avionics Components team interests in cross-functional engineering meetings, design reviews, and customer engagements 
• Identify and track technical and programmatic risks, driving mitigation plans in collaboration with the engineering team and Program Office 
• Develop and maintain Avionics program documentation including technical plans, schedules, review packages, and status reports 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or related field (Master's preferred) 
• 5+ years of professional experience in systems engineering, avionics engineering, or a related technical program role 
• Demonstrated experience with requirements decomposition, flow-down, and traceability management for electrical or avionics systems 
• Experience developing and managing interface control documents across complex, multi-discipline hardware programs 
• Strong electrical engineering fundamentals with the ability to engage credibly with engineers across digital systems, FPGA, EPS, RF, and harness disciplines 
• Experience supporting or leading programmatic activities including schedule development, milestone tracking, and sprint or agile planning 
• Exceptional written and verbal communication skills, with demonstrated ability to convey technical information clearly to both engineering and program management audiences 

PREFERRED SKILLS AND EXPERIENCE

• Experience with model-based systems engineering (MBSE) tools such as Cameo, Rhapsody, or similar 
• Familiarity with requirements management tools such as DOORS, Jama, or Confluence 
• Experience working directly with government or defense customers and interpreting military or defense acquisition specifications 
• Familiarity with spacecraft avionics architectures including flight computers, EPS, RF communications, and harness design 
• Familiarity with agile development methodologies applied to hardware engineering programs 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salaries:
  • Electrical Engineer III: $115,000-$170,000
  • Senior Electrical Engineer: $150,000-$220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

The Electrical Engineer II, Systems will support the design, analysis, testing, and integration electrical systems for complex space missions. You'll contribute to all phases of the spacecraft development lifecycle, from initial concept and requirements definition through integration, test, and on-orbit operations. This role offers the opportunity to tackle challenging technical problems, develop innovative engineering solutions, and grow your expertise in spacecraft electrical systems while making a direct impact on missions critical to space security and sustainability. 

RESPONSIBILITIES

• Support spacecraft electrical systems engineering activities, including concept development, requirements analysis, trade studies, interface definition, and verification planning 
• Contribute to the design, development, and verification of electrical systems with a focus on power distribution, signal integrity, and component selection 
• Collaborate with cross-functional spacecraft engineering teams to support system-level integration and mission objectives 
• Assist in the development and maintenance of requirements management processes and documentation 
• Participate in integration and test activities including subsystem and system-level testing, developing and executing test procedures, performing functional verification, troubleshooting hardware anomalies, and supporting root cause analysis and corrective action implementation 
• Conduct analysis tasks such as power budgets, thermal analysis, and basic radiation effects assessment 
• Support the development of test procedures and contribute to design verification activities 
• Document design decisions, analysis results, and test findings 

QUALIFICATIONS

• Bachelor's Degree in Electrical Engineering, physical sciences, or related technical field 
• 2-5 years of relevant engineering experience in aerospace, defense, or related high-reliability industries 
• Working knowledge of spacecraft electrical systems and subsystems 
• Experience with electrical design principles, circuit analysis, and system-level thinking 
• Familiarity with requirements management and engineering documentation practices 
• Strong analytical and problem-solving skills 
• Excellent communication skills and ability to work effectively in a team environment 
• Proficiency with standard electrical engineering tools (e.g., SPICE simulation, CAD tools, analysis software) 

PREFERRED SKILLS AND EXPERIENCE

• Experience with spacecraft power systems, avionics, or related electrical subsystems 
• Familiarity with space environment effects on electronics (radiation, thermal, vacuum) 
• Experience with integration and test processes for complex electrical systems 
• Knowledge of reliability analysis techniques and FMEA methodologies 
• Experience testing large quantities of electronics, in-circuit testing 
• Programming or scripting skills (Python, MATLAB, or similar) 
• Understanding of signal integrity and EMI/EMC considerations 
• Ability to maintain or obtain TS//SCI clearance 

COMPENSATION

• Base Salary: $90,000 - $135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location: this role will be fully onsite at our GravityWorks factory in Centennial, CO  
• Work environment is in a standard office, working at a desk or in a production factory. 
• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs. 

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Senior Electrical Engineer, RF at True Anomaly, you will lead the design of integrated RF subsystems and drive technical decision-making across multiple spacecraft programs. Operating with a high degree of autonomy, you will resolve technical ambiguity, lead cross-team delivery efforts, and serve as a technical mentor who raises the engineering bar across teams.

RESPONSIBILITIES

• Lead design of integrated RF subsystems across multiple frequency bands; drive trade-offs in the solution space
• Lead trade studies between modulation schemes, coding rates, bandwidth, and power efficiency for space communication systems
• Define and execute full RF test campaigns, including EMI/EMC validation
• Champion design robustness; ensure streamlined execution across design and test phases
• Balance RF performance, cost, and risk trade-offs across mechanical, software, power, and thermal domains
• Lead cross-team delivery efforts; manage technical dependencies and program milestones
• Drive requirements capture, analysis (QoS, link budgets, antenna patterns, compatibility), and documentation across comm system designs
• Oversee integration of RF components—SDRs, antennas, amplifiers, filters, mixers, oscillators—into spacecraft systems
• Support payload analysis and integration including radar and complex RF systems
• Mentor peers and junior engineers; shape and raise technical standards across teams
• Manage ambiguity on projects; set checkpoints and communicate effectively across teams

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field (Master's preferred)
• 7–10 years of experience in RF system design and development for aerospace applications
• Demonstrated experience leading RF subsystem design and integration across multiple bands
• Experience with link optimization, modulation/coding selection, and antenna coverage analysis
• Experience with LEO, MEO, GEO, or deep space satellite missions
• Hands-on experience with RF test equipment and leading RF test campaigns
• Proficiency in RF simulation tools (MATLAB, HFSS, FEKO, CST, or similar)
• Excellent communication and interpersonal skills; ability to align and influence across teams

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or Aerospace Engineering
• Experience with software-defined radios (SDRs) in space communication applications
• EMI/EMC experience at the component and system level
• Knowledge of space communication protocols (CCSDS or similar)
• Experience with regulatory filing committees and processes
• Familiarity with launch vehicles, missile defense applications, and integration environments
• Experience with encryption algorithms, preferably NSA Type 1
• Experience in a startup or fast-paced engineering environment

COMPENSATION

• Base Salary: $150,000 - $220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Long Beach, CA.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is seeking a talented and organized Senior Payloads Systems Engineer to serve as the primary technical and programmatic interface between the Payloads engineering team and the Program Office. You will be the connective tissue that keeps the team aligned, on schedule, and delivering against customer and program requirements. You will own requirements decomposition and flow-down, drive ICD development, lead technical and programmatic trade studies, and represent Payloads team interests in wider engineering forums. You are equally comfortable parsing a customer specification and facilitating a sprint planning session — and you bring the technical credibility to earn the trust of both engineers and program managers. This is a high-visibility role that directly shapes how the Payloads team executes and grows. 

RESPONSIBILITIES

• Own requirements decomposition and flow-down across the Payloads engineering team, ensuring traceability from customer and program-level requirements to subsystem and component specifications 
• Develop, maintain, and negotiate interface control documents (ICDs) between Payloads subsystems and broader spacecraft systems 
• Serve as the primary interface between the Payloads team and the Program Office, translating technical status, risks, and needs into clear programmatic communication 
• Interpret and adjudicate customer specifications, identifying areas of risk, ambiguity, or non-compliance and driving resolution with engineering and program stakeholders 
• Lead technical and programmatic trade studies, synthesizing inputs from across the Payloads team and producing clear recommendations 
• Assist the Payloads team leadership in roadmap planning, ensuring near-term deliverables and long-term development priorities are clearly defined and resourced 
• Facilitate sprint planning, milestone tracking, and schedule development in coordination with the Program Office, keeping the Payloads team on track and dependencies visible 
• Represent Payloads team interests in cross-functional engineering meetings, design reviews, and customer engagements 
• Identify and track technical and programmatic risks, driving mitigation plans in collaboration with the engineering team and Program Office 
• Develop and maintain Payloads program documentation including technical plans, schedules, review packages, and status reports 

QUALIFICATIONS

• Bachelor's degree in Aerospace Engineering, Electrical Engineering, Systems Engineering, or related field (Master's preferred) 
• 5+ years of professional experience in systems engineering, payload engineering, or a related technical program role 
• Demonstrated experience with requirements decomposition, flow-down, and traceability management 
• Experience developing and managing interface control documents across complex, multi-discipline engineering programs 
• Strong understanding of spacecraft payload systems and the ability to engage credibly with engineers across EO/IR, mechanisms, RF, electronics, and software disciplines 
• Experience supporting or leading programmatic activities including schedule development, milestone tracking, and sprint or agile planning 
• Exceptional written and verbal communication skills, with demonstrated ability to convey technical information clearly to both engineering and program management audiences 

PREFERRED SKILLS AND EXPERIENCE

• Experience with model-based systems engineering (MBSE) tools such as Cameo, Rhapsody, or similar 
• Familiarity with requirements management tools such as DOORS, Jama, or Confluence 
• Experience working directly with government or defense customers and interpreting military or defense acquisition specifications 
• Familiarity with agile development methodologies applied to hardware engineering programs 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $150,000 - $220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—Successful candidates will be located near Denver or Long Beach. While we observe a hybrid work environment, most work must be done onsite.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

HERE'S WHAT YOU'LL DO

HERE'S WHAT YOU'LL NEED

• Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
• Minimum of 6 years of related experience required.
• EIT/FE preferred.
• LEED accreditation preferred.
• Must be an independent thinker, analytical, contributes to process development
• Must possess working knowledge and experience, while still acquiring higher level knowledge.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required.

HERE'S WHAT YOU'LL NEED

• Minimum of 10 years of related experience required.
• Current PE in the United States required.
• LEED accreditation preferred.
• Advanced knowledge of electrical engineering.
• Ability to serve in QAQC process and as an independent reviewer.
• Excellent verbal and written communication skills.
• Strong ability to interface effectively with clients and members of the design team.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required.

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What You’ll Do

1. Contribute to the iteration of Katalyst’s spacecraft power system design, including schematics, board layouts, and interface definitions, to improve performance and complete feature upgrades. 
2. Support operation of power system hardware during qualification testing, working directly with test engineers to execute thermal vacuum and vibration qualification test campaigns.
3. Help own integrated functional testing of electrical hardware with other spacecraft subsystems. 
4. Plan and execute targeted stress and performance testing, exercising hardware to design extremes through targeted performance testing.
5. Help define and plan design changes for feature or architecture improvement of the spacecraft power system with respect to future mission requirements.

What We’re Looking For

1. Pride in work: You hold yourself to a high bar. You produce designs, documentation, and analyses that are correct, detailed, and ready for scrutiny.
2. Humility: You take on new challenges, learn from others, and grow. You seek out missing context, ask good questions, and course-correct quickly with new information.
3. Technical intuition and mastery: You understand power electronics at the component level and how that integrates in and impacts spacecraft systems at the architecture level.

Your Ideal Background

1. Bachelor’s degree in electrical engineering, or equivalent field
2. 3+ years of experience designing, testing, or integrating power electronics or closely related high-reliability power systems
3. Strong understanding of switch mode power supply design and DC/DC converter architectures 
4. Proficiency in Altium or similar ECAD tool for schematic and PCB layout design
5. Exposure to common digital communication standards (SPI, I2C, UART, CAN, ethernet) and mixed-signal design best practices 
6. Hands-on experience with hardware bring-up, bench testing, and debugging
7. Experience executing test procedures and documenting results
8. Experience troubleshooting board- or component-level analog and digital electronics issues 
9. Experience integrating power electronics with other subsystems 

Additional Requirements: Must be willing to work extended hours and weekends as needed.

Compensation and Benefits: Your base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The anticipated salary range for this role is $105,000 - $145,000 annually

Base salary is just one part of your total rewards package at Katalyst. You will also be eligible for long-term incentives, in the form of the Employee Stock Option and Equity Plan, as well as a relocation bonus and other discretionary bonuses. You will also receive access to comprehensive medical, vision, and dental coverage, and unlimited Paid Time Off.

At Katalyst our work on projects involving the U.S. Department of Defense requires adherence to International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120-130, which requires compliance with U.S. export laws before allowing employees to perform certain positions. Currently, our available roles necessitate access to ITAR-controlled information, and as a result, Katalyst would have to ensure any non-US person is authorized access to ITAR information before the commencement of employment. We are committed to equal employment opportunities and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Position Snapshot: Civil/Structural Engineer – Oil & Gas

Atwell is seeking a licensed Civil/Structural Engineer (PE) with experience supporting structural design and engineering for the Oil and Gas industry. Our current project portfolio includes oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines, terminals, compressor stations, and processing facilities.

In this role, you will be responsible for leading and executing civil and structural engineering efforts, ensuring alignment with project scope, schedule, budgets, client expectations, and applicable codes and standards. This position involves developing engineering documentation from concept through construction, overseeing structural analyses, mentoring junior team members, and coordinating across disciplines to support successful project execution.

You will play a critical role in the design of reinforced concrete foundations, structural steel platforms and supports, equipment skids, and pipeline structural systems.

Roles and Responsibilities:

• Lead the civil and structural engineering design for oil and gas infrastructure projects, including pipelines, pump stations, compressor stations, terminals, and process facilities
• Develop construction documents, including structural plans, general arrangements, framing plans, and connection details for steel and concrete structures
• Conduct structural analysis under various loading conditions including wind, seismic, blast, and equipment loads in accordance with applicable codes (IBC, ASCE, AISC, ACI, API, etc.)
• Review and approve engineering calculations, drawings, and reports prepared by internal teams and subcontractors
• Collaborate with multidiscipline teams including mechanical, piping, and electrical to coordinate structural requirements across project phases
• Perform field visits to verify as-built conditions, gather site data, and provide construction support as needed
• Provide mentorship to junior engineers and support team development through technical leadership
• Monitor project schedules, budgets, and resource allocations to ensure deliverables are met on time and within scope
• Support quality assurance by implementing Atwell’s QA/QC procedures and best practices