Overview

Join our dynamic team as a Product Design Engineer, where you'll pioneer the development of state-of-the-art hardware systems for wearables and AI devices within New Technology Initiatives. Collaborate with cross-functional experts to transition cutting-edge concepts through prototyping and into mass-produced consumer electronics. Your expertise will drive innovations in mechanical engineering, CAD design, and high-volume manufacturing processes.

Responsibilities

• Lead the mechanical design process for components or systems, ensuring comprehensive understanding from concept to product launch.
• Develop and refine mechanical solutions collaboratively in a cross-functional team environment.
• Create, test, and iterate on prototypes and characterization testing systems.
• Oversee the entire product development cycle, from initial concept through to final product shipment.
• Coordinate closely with Asia-based Supply Chain teams to ensure smooth production transitions.
• Implement advanced technologies and innovative approaches to address complex mechanical engineering challenges with cross-department collaboration.
• Travel to vendor sites as required, up to 20% of the time.

Minimum Qualifications

• Bachelor's degree in Mechanical Engineering.
• 8+ years of industry experience in mechanical design.
• Proficiency in Design for Manufacturability (DFM), Design for Assembly (DFA), statistical tolerance analysis, functional dimensioning, geometric tolerancing, and 3D/2D CAD.
• Solid understanding of material properties, including plastics, metal, adhesives, and glass.
• Strong background in testing and analysis methods, such as FEA, Simulation, and Design of Experiments.
• Experience with high-volume manufacturing techniques, including stamping, machining, and injection molding.

Preferred Qualifications

• 10+ years of experience in product design and development for handheld and wearable electronics in high-volume manufacturing, with a focus on full system ownership.
• Advanced degree (MS or PhD) in Mechanical Engineering.
• Proficiency with NX design software.
• Experience collaborating with industrial design teams on products with cosmetic surface treatments.
• Expertise in designing for human factors in consumer electronics.
• Ability to communicate in English.

About the role

We are looking for a Senior Reliability Lab Operation Engineer who will be responsible for the full lifecycle management of laboratory equipment, complex problem analysis, and technical improvement, and participation in the development of reliability test equipment and test fixtures. The engineer will ensure the laboratory operates efficiently, stably, and with low risk through institutionalized and engineering means, providing reliable experimental platform support for the R&D, verification, and mass production of POS terminal products.

This position requires a deep understanding of mechatronic consumer systems, strong development skills, and proven ability to lead and collaborate in cross-functional team environments and in supplier management. In this role, you will manage contract workers (CWs) to meet the needs of laboratory operational excellence.

What you will do

1. Laboratory Operation and Equipment Full Lifecycle Management

• Fully responsible for the planning, operation, and continuous optimization of reliability lab equipment;
• Core equipment under management includes, but is not limited to:
• Environmental reliability equipment: High/low temperature, temperature and humidity, thermal shock, temperature/humidity cycling equipment, etc.;
• Electronic testing and measurement equipment: Data acquisition systems, programmable power supplies, electronic loads, multimeters, sensors, and data loggers;
• Develop and implement equipment full lifecycle management strategies.

2. Maintenance, Repair, and Calibration System Development

• Lead and execution of the annual maintenance, repairing, and calibration plans for laboratory equipment;
• Deeply participate in the analysis of complex equipment failures and technical decision-making, leading internal and external technical reviews when necessary;
• Standardize the instrument calibration management process to ensure the accuracy and consistency of test data;
• Establish and continuously optimize management systems and technical documents for equipment maintenance, repair, and calibration.

3. Reliability Test Equipment and Fixture Development

• Participate in or lead the customized development or modification of reliability test equipment to meet POS product testing needs;
• Collaborate on the design and development of reliability test tooling and fixtures (structural or electrical);
• Promote standardization, modularization, and reusability design for test equipment and fixtures.

4. Risk Control and Technical Improvement

• Identify technical risks in laboratory equipment operation and reliability testing processes;
• Formulate and implement preventive maintenance and risk control programs to enhance overall equipment reliability;
• Analyze the impact of equipment issues on test results and product reliability, and propose systemic improvement suggestions.

5. Supplier and Cross-Departmental Collaboration

• Act as the technical interface, liaising with equipment manufacturers and third-party maintenance/calibration service providers;
• Evaluate supplier technical capabilities and service quality, and drive continuous improvement;
• Closely cooperate with R&D, Quality, and Manufacturing departments to ensure the smooth execution of reliability testing plans.

6. Systems, Audits, and Technical Support

• Participate as a core engineer in internal systems and customer audits (such as requirements related to ISO 9001, ISO/IEC 17025);
• Provide technical evaluation and equipment feasibility analysis for new laboratory projects and test methods;
• Provide technical guidance and experience sharing for managing junior engineers or technicians.

Who you are

We’re looking for someone who meets the minimum requirements to be considered for the role. If you meet these requirements, you are encouraged to apply. The preferred qualifications are a bonus, not a requirement.

Minimum requirements:

1. Education and Experience

• Bachelor's degree or above, in a Mechatronics-related major (Mechanical Engineering, Electrical Engineering, Automation, Mechatronics, etc.);
• 5+ years of experience in lab equipment management or reliability lab engineering (3+ years can also be considered for a senior reserve position);

2. Technical Skills

• Familiar with the structure, principles, and maintenance strategies of environmental reliability test equipment;
• Experience in the development or modification of reliability test equipment;
• Experience in test fixture design, development, or optimization;
• Familiar with ME software (such as AutoCAD), capable of reading and drawing engineering fixtures;

3. Comprehensive Abilities

• Possess systematic thinking and engineering problem-solving abilities;
• Good communication, coordination, and project promotion skills;
• High sense of responsibility and risk awareness, capable of making technical judgments at critical junctures.
• Requires 20% business travel (mainly within Mainland China)
• Requires proficient English reading and writing skills.

Preferred qualifications:

• Relevant industry experience with POS terminals, electronic payment devices, or consumer electronics;
• Familiar with electronic manufacturing reliability testing requirements, such as high/low temperature cycling, damp heat aging, etc.;
• Experience participating in customer audits or third-party laboratory audits is a plus.
• Experience in establishing a reliability lab or FA lab.

Impact In This Role

Your role as a Manufacturing Engineer will be to support and drive improvement to our critical manufacturing functions. We have two sets of customers—our builders, who order parts through us, and our manufacturing partners, who manufacture and assemble these parts—and you’ll be consistently working at the interface between the two.  At Fictiv, we believe in creating the world’s premier platform for hardware manufacturing, and you’ll be playing a critical role in making that happen.

In your role as the Manufacturing Engineer, you will be reviewing and analyzing the manufacturability and costs associated with part fabrication (including die casting, Gravity casting,Forging and other manufacturing processes requiring tooling) and mechanical assembly. In this role, you’ll be using your Mechanical Engineering background, knowledge of manufacturing processes, and experience having brought mechanical components into high volume manufacturing to determine what design changes may need to be made to our builders’ design specifications in order to meet their needs and to very accurately price out the cost of fabricating a part. Ultimately, you’ll be working daily to use your technical expertise to provide pricing to builders and to assist in the development of pricing calculators and, ultimately, automation of pricing & DFM to reduce the time to quote for our builders and reduce overhead for our manufacturing partners.

You will report to the Manufacturing Engineering Lead/Manager

What You’ll Be Doing

• Release Package Review – Analyze models, drawings, parts lists, and other data to determine scope of work, fabrication feasibility, cost to fabricate, and minimum lead time.
• Quoting – Combine your analysis with Fictiv’s software recommendations and feedback from our manufacturing partners to generate quotes for builders.
• DFM Feedback – Provides DFM feedback to builders, such as recommended design change to adapt the tooling manufacturing limitation. 
• Platform development support – support the platform development of casting tooling, such as tooling calculator, material database, DFM tools on platform.
• Communication-communicate with US sales to support the part/tooling design solution and quote feedback if needed.
• Program support
  -Lead the transition of customer programs from prototype and low-volume production (3D printing, CNC machining, soft tooling) to high-volume casting tooling, including part-level redesign, material and process selection, tolerance optimization, and tooling architecture definition to support scalable mass production.

Desired Traits

• Associate degree（Should）
• -At least 10 Years casting manufacturing working experience,(Must)

• -At least 6 years of Casting(gravity and die casting) experience.(Must)
• -Able to use NX/UG software, and able to analyze casting parts and modify the 3D file.(Must)
• -Able to use Magma or other similar software to do the analysis of metal mold flow.
•  (Better to have)
  -Able to read regular 2D drawings and understand GD&T,(Should)
  -Able to read English, write English,(Should)
  -Able to speak English.(Should) 

• Personality, earnestly and responsible, Team spirit, Integrity and Honesty.(Must)
• Self-starter, manages time efficiently, able to complete work in a timely manner without active supervision (Should)

• Enjoys sharing knowledge and teaching others about manufacturing (Should）

Perks and Benefits

• Housing fund, and social insurance, commercial insurance for employee and your child
• Annual leave, paid sick leave
• Team celebrations
• Annual training opportunities including English learning, technical skills certifications,
• Yearly health check-up
• And much, much more!

Interested in learning more?  We look forward to hearing from you soon.

Impact In This Role

Your role as a Manufacturing Engineer will be to support and drive improvement to our critical manufacturing functions. We have two sets of customers—our builders, who order parts through us, and our manufacturing partners, who manufacture and assemble these parts—and you’ll be consistently working at the interface between the two.  At Fictiv, we believe in creating the world’s premier platform for hardware manufacturing, and you’ll be playing a critical role in making that happen.

In your role as the , you will be reviewing and analyzing the manufacturability and costs associated with fabrication (including CNC machining, injection molding, urethane casting, and other manufacturing processes) submitted by our builders. In this role, you’ll utilize your Mechanical Engineering background and knowledge of manufacturing processes to identify design changes that may be necessary to meet our builders' specifications.

You will report to the Manufacturing Engineering Lead.

What You’ll Be Doing

• RFQ Preparation- review the request in each RFQ from the 3D drawing, 2D drawing, RFQ notes and other information, to clarify with Sales or manager if anything is not clear.
• Quoting – Combine your analysis with Fictiv’s MP’s feedback to provide the competitive price to each RFQs. and clarify the quote to the sales team if any question from them.
• DFM – Combine your analysis with Fictiv’s MP’s feedback to provide the manufacturing analysis. Such as tolerance, Radii, Unachievable features etc.and clarify the DFM to the sales team if any question from them.
• Tools development – Use your fabrication expertise and understanding of process cost drivers to develop cost calculators or related tools that allow for Fictiv to bring quoting in-house or to improve the efficiency of work.

Desired Traits

• 6+ years of manufacturing related work experience(Must)
• 3+ years Experience working with CNC machines, such as 3-, 4-, 5-axis mill, 2-axis and live-tooling lathe.(Must)
• 2+ years hands-on experience on generating quotations for customers. (this 2 years experience can be included in the item 2, which is 6+ years of related work experience)(Must)
• Understanding of GD&T and conventional (coordinate) tolerancing. (Must)
• Knowledge of different machining material, common finishing,secondary operation.(Should)
• Reading ,written English and Conversational skills required.(Must)
• Spoken English is a Bonus(better to have)
• Meticulous, detail oriented, inclination for documentation (Should)
• Excellent verbal and written communication skills(Should)
• Self-starter, manages time efficiently, able to complete work in a timely manner without active supervision (Should)
• Enjoys sharing and learning knowledge and teaching others about manufacturing processes(better to have)

Perks and Benefits

• Housing fund, and social insurance, commercial insurance for employee and your child
• Annual leave, paid sick leave
• Team celebrations
• Annual training opportunities including English learning, technical skills certifications,
• Yearly health check-up
• And much, much more!

Interested in learning more?  We look forward to hearing from you soon.

Impact in this Role

You will be responsible for scheduling work orders and act as a project engineer to address any in-process questions our manufacturers may raise, provide production status visibility to our builders, and mitigate major project risks that pose a threat to meeting our builders’ specifications. You will report to the head of program management in Feidi. Job Description

What You’ll Be Doing

Responsible for the post-sales order/program management in Fictiv China-

📍 This position will be required to work from our office in Guangzhou, China.

Join us in building the future of manufacturing! 🌎🔧✨

BBPOS is looking for a passionate, self motivated and hard working Quality engineer to be part of a diverse, dynamic and high energy team. The work is in a highly collaborative and multi- functional environment, handling several projects at a time. The successful candidate will be an experienced Quality engineer who ideally has Mechanical, Electrical and Hardware Quality Assurance expertise and will be experienced in Quality management systems, Data analysis techniques and quality assurance methodologies. 

What you will do

This position is based in Shenzhen, requiring frequent business travel to our manufacturing partners in Vietnam and other Contract Manufacturers (CMs) across China. You will be responsible for OEM product quality from new product introduction through sustaining. Being comfortable in a rapidly evolving and dynamic environment coupled with excellent communication skills are essential to the role. You will foster and build an excellent communication and working relationship with our global Stripe partners.

• Define and implement BBPOS quality management in OEM factories.
• Establish a system of quality metrics to continually drive and supervise measurable quality at OEM.
• Manage IQC, IPQC and OQC for product quality control.
• Define and implement Quality assurance processes for our in house developed Hardware solutions (both for our Shop floor system Hardware and for BBPOS Product Test & Diagnostic bundles).
• Conduct quality system audit and quality process audit for CM maturity improvement.
• Understand product and process CTQ and implement control plans to monitor these CTQ’s and prevent quality excursions or quality incidents.
• Lead quality readiness review and monitor quality result during new product introduction builds.
• Conduct failure analysis and implement corrective actions for quality issues resolution.
• Drive the use of statistical analysis for key Quality data across the team.
• Collaborate with multi-functional peers on key business initiatives. Actively participate in these discussions in a transparent manner and bring data and value to these initiatives based on data and knowledge from your team.

Who you are

We’re looking for someone who meets the minimum requirements to be considered for the role. If you meet these requirements, you are encouraged to apply. The preferred qualifications are a bonus, not a requirements

Minimum requirements: 

• Education background from BE, BS or MS in Engineering 
• At least 8 years of experience in implementing hardware Quality assurance methodologies to prevent quality issues from sneaking out of the factory.
• Knowledge of FATP (Final Assembly, Testing, Packing) for a POS reader or similar products such as phone or tablet electronic products.
• Basic Lean principle and methodologies such as CTQ, PDCA, 8D Problem Solving, Kaizen, Mistake proofing, DMAIC, FMEA, etc…
• Root cause analysis skills and with robust corrective action understanding for problem solving.
• Familiar with critical to quality control, and implement statistical quality process control and risk mitigation plan to ensure quality.
• Able to develop and implement OEM quality process audit checklist for continuous quality improvement.
• Proven track record to understand all aspects of Quality and to be able to lead and influence Operations and Suppliers.
• Familiarity with Hardware failure analysis techniques.
• Fluent in Chinese and English
• Comfortable with frequent business travel

Preferred qualifications: 

• Basic SMT (Surface Mount Technology), PCBA(Print Circuit Board Assembly) background
• Quality qualification would be an advantage

Why A365 Software Engineering?

Build the cloud platform that’s transforming electronics design. Altium 365 for cloud lets design engineers communicate, collaborate and bring their ideas to market more efficiently than any platform in the industry. These are some of the R&D Software Engineering contributions you might make to Altium 365:    

• Building new cloud-native applications and scalable infrastructure
• Utilizing AI and ML to power advanced search capabilities
• Large-scale data processing; data modeling; holistic, intent-based API design
• Stateful and stateless servers, relational databases, ORM frameworks

Altium offers the opportunity to conceive and build new product features for electronics engineers, and add your own ideas to the world’s most collaborative and efficient electronics design platform.

A Day in The Life of Our DevOps Engineer:

• Have clear and solid relationships with software development departments.
• Plan and document work and projects.
• Build and continuously optimize CI/CD process and streamline automation effort for server provisioning and applications deployment.
• Build a resilient and scalable service infrastructure to accommodate regions.
• Deploy, monitor and scale application services.
• Mentor team members and drive knowledge sharing.
• Participate in project management and on-going strategic planning.

Who you are and what you’ll need for this position:

• It's a full-time, on-site position - five days a week in the office.
• 6+ years of experience in DevOps / SRE environment.
• 6+ years of experience working with Linux, Windows systems.
• Strong understanding and knowledge of Kubernetes. 
• Strong understanding and knowledge of cloud infrastructure components such as AWS (EC2,EKS, RDS, Opensearch, S3, Storage, Route53 and network appliances.
• Strong understanding of Infrastructure as a Code approach (Terraform preferred).
• Good understanding of Software Development Lifecycle.
• Good understanding of microservice architecture.
• Good experience in Monitoring k8s clusters, APM, services and infrastructure located in AWS (NewRelic).
• Ability to create automation tools in Go, Python, Bash, Powershell.
• Familiarity with Continuous Delivery tools used with microservices.
• Hands-on experience architecting and securing cloud networking such as VPC peering, Transit Gateways, subnet, and security groups (nice to have).
• Working knowledge of Jenkins, GitLab or alternative Continuous Integration systems.
• Understanding of Active Directory, DNS and Domain (nice to have).
• Coding Experience.

About the Role

We are developing a modern cloud-based engineering and collaboration platform used by global hardware and product development teams. As a QA Engineer, you will play a key role in ensuring the quality, stability, and performance of a large-scale, feature-rich system. You will collaborate closely with developers, product managers, and design teams to validate functionality, uncover issues early, and help deliver an exceptional user experience across complex engineering workflows.

A Day in the Life

- Create clear, thorough test documentation for new features to ensure they meet functional and quality expectations.

- Execute manual and automated tests to identify bugs, usability issues, or inconsistencies before release.

- Perform extensive regression testing across multiple modules of the engineering platform to maintain product stability.

- Collaborate with developers to reproduce issues, verify fixes, and improve overall quality processes.

- Participate in planning sessions to understand feature goals, risks, and test coverage needs.

- Analyze test results, produce detailed reports, and contribute to continuous improvement of QA workflows.

What We’re Looking For

- 4+ years of experience as a QA Engineer working on complex or large-scale software systems.

- Strong experience testing web applications and distributed SaaS systems.

- Ability to write comprehensive test plans and work with test management platforms (e.g., TestRail).

- Solid understanding of manual and automated testing methodologies, QA processes, and SDLC best practices.

- Hands-on experience testing at the API level.

- Familiarity with performance testing tools (e.g., JMeter).

- Knowledge of CI environments such as Jenkins, GitHub Actions, or TeamCity.

- Detail-oriented mindset with strong analytical and problem-solving skills.

- Excellent communication skills in English, both written and verbal.

What We Offer

- Opportunity to work on impactful, real-world engineering and cloud collaboration products.

- A culture that values autonomy, continuous learning, and shared knowledge.

- Competitive benefits including health coverage, mental-wellbeing support, learning budget, and team activities.

Applications Engineer - APAC

Overview

US Conec is seeking a qualified and customer-oriented Applications Engineer to be based in or around Shenzhen to support business growth and technical service initiatives across the APAC region. This position will serve as a key technical interface between customers in the Greater Bay Area and US Conec’s global engineering organization.

该职位将常驻深圳或大湾区，作为亚太地区的重要技术支持岗位，负责为客户提供专业的产品应用指导、技术支持及解决方案。候选人需具备扎实的工程背景、良好的中英文沟通能力，并能够在快速发展的技术环境中高效工作。

The Applications Engineer will collaborate closely with regional Sales, global R&D, Product Management, and Operations teams to ensure alignment between customer technical requirements and US Conec’s product capabilities, while supporting long-term customer satisfaction and strategic growth in the region.

Responsibilities

• Provide professional technical support for product applications, including connector assembly processes, integration guidance, and troubleshooting.
• 为客户提供产品应用支持，包括连接器组装工艺指导及技术问题分析与解决
• Conduct structured technical training sessions for customers and partners (onsite and virtual).
• Develop and maintain technical documentation, application guidelines, and training materials.
• Support customer product evaluations, trials, and qualification processes.
• Coordinate technical communication between Shenzhen-based customers and global engineering teams.
• Participate in laboratory testing, product validation, and continuous improvement activities.
• Provide technical input to support regional sales initiatives and customer development strategies.
• Travel within the Greater Bay Area and broader APAC region as required (approximately 20–30%).

Must-Haves

• Bachelor’s degree or above in Engineering (Mechanical, Electrical, Optical Engineering preferred).
• Minimum 2–3 years of experience in applications engineering, field engineering, or technical customer support.
• Fluent Mandarin Chinese and strong professional English communication skills.
• Ability to communicate complex technical concepts clearly and professionally.
• Hands-on experience in laboratory, manufacturing, or precision assembly environments.
• Strong analytical thinking and structured problem-solving skills.
• Ability to work independently while collaborating effectively within a global organization.

Nice-to-Haves

• Experience in fiber optics, connectors, cabling systems, or telecommunications infrastructure.
• Experience supporting customers in Shenzhen or the Greater Bay Area technology ecosystem.
• Familiarity with root cause analysis methodologies.
• Experience delivering structured technical training programs.
• Experience working in multinational or cross-cultural environments.

Overview

Join our team as a MEMS Microphone Engineer and lead the charge in developing and optimizing cutting-edge MEMS microphone modules for the future of consumer electronics. Your deep expertise in acoustic engineering and semiconductor manufacturing will be the driving force behind overcoming complex system-level challenges like Microphone Coexistence (Mic-Coex) with wireless radios and ensuring pristine sound quality. Collaborate with cross-functional teams to deliver reliable, high-performing audio solutions with impressive manufacturing yields.

Responsibilities

• Drive the development of custom MEMS microphone modules, covering MEMS transducer, ASIC, and advanced packaging solutions, while balancing acoustic performance, power consumption, and physical footprint.
• Lead the integration of microphone modules into complex systems, focusing on resolving Microphone Coexistence (Mic-Coex) issues involving RF/EMI and signal integrity.
• Implement mechanical and electrical integration using flexible printed circuits (FPC), ensuring robust electrical connectivity and optimal acoustic path designs to maintain high-frequency sensitivity.
• Oversee the Final Assembly, Test, and Pack (FATP) process, establishing critical tolerances and developing acoustic testing methodologies for mass production.
• Define and oversee comprehensive reliability testing programs, including thermal cycling, drop/shock testing, and moisture sensitivity (MSL) evaluations, based on industry standards like JEDEC and MIL-STD.

Minimum Qualifications

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Acoustics, Physics, Materials Science, or a related field.
• A minimum of 5+ years of direct experience in MEMS microphone module development from concept to high-volume mass production.
• Expertise in acoustic engineering and semiconductor manufacturing, with strong problem-solving skills in system-level challenges such as RF/EMI and signal integrity.
• Proven experience in collaborating with cross-functional teams, external vendors, and contract manufacturers.
• Willingness to travel internationally (up to 25-30%) to support manufacturing ramps and vendor audits.

Preferred Qualifications

• Advanced degree (Master's or Ph.D.) in a relevant field.
• Familiarity with statistical process control (SPC) and data analysis tools like JMP or Minitab for yield analysis and failure mode analysis.
• Experience with structured problem-solving techniques such as 8D and FMEA.

Who you are

We are looking for a Senior Hardware Manufacturing Process Engineer who has great expertise in enabling design and achieving a high level of manufacturing performance and quality and maintaining this level of performance throughout a product’s life. This is someone who has significant experience of working with the R & D team to enable & optimize design and defining manufacturing processes on-site at electronic manufacturing facilities. The ideal candidate is someone who enjoys critical thinking and problem solving, can successfully partner with a wide variety of stakeholders and is willing to dive deep.

This role will be based in Shenzhen. A significant amount of this person’s time will be spent on-site at partner contract manufacturing facilities.  

What you’ll do

You will lead the development, validation, optimization, and documentation of production processes across both final assembly (FATP) and key components manufacturing.

• Led hardware assembly processes development, including but not limited to PSA activation, adhesive dispensing, heat staking, screwing, ultrasonic/laser welding, and the design of semi-auto and fully automated assembly lines.
• Extensive experience in the FATP process, with deep expertise in assembly technical requirements, tolerance analysis, and critical quality control points for electronic components (PCBA, modules, and mechanical parts).
• Led Process DFM initiatives, providing critical feedback to R&D/Engineering during the concept phase to ensure design and manufacturing feasibility and cost effectiveness.
• Perform deep-dive failure analysis on manufacturing-related issues. Utilize PFMEA to mitigate risks before mass production.
• Drive process innovation and develop MP-intent equipment. 
• Implement continuous improvement strategies using Six Sigma or Lean methodologies to maximize yields and reduce manufacturing costs.
• Travel to vendor sites to lead NPI builds. Use statistical tools (such as JMP or Minitab) to analyze DoE (Design of Experiments) data and validate process stability (Cpk/PPK).
• Partner with Hardware Engineering, GSM, and Quality teams to identify, audit, and select contract manufacturers capable of meeting technical requirements.

Minimum requirements

• 15+ years’ experience in manufacturing engineering, possessing knowledge of design for manufacturing, assembly process engineering 
• Strong track record of implementing manufacturing improvements through DFM and DFx principles.
• Knowledge of GD&T principles and use, ability to analyze and understand part tolerance and tolerance stack up and their impact on assembly and component production.
• Experience leading design and implementing manufacturing jigs/fixtures and process flows.
• Possessing the interpersonal skills and experience needed to work with CM teams and management in a collaborative way to meet development schedules and mass-production deliveries.
• Working knowledge on quality management tools (e.g., six sigma, lean production, etc.)  and ability to interpret quality reports.
• Fluency in Chinese and English.

Preferred qualifications

• Mechanical design experience is strong plus
• Experience working in consumer electronics.
• Experience with POS hardware development and manufacturing including knowledge of tamper-proofing systems, and components for POS devices. 

Overview

Join our team as a Mechanical Engineer where you will take the lead in the verification and certification of complex test stations for mixed reality devices at our factory in Weifang, China. This role is pivotal to ensuring the readiness and performance of our test systems, requiring an independent, problem-solving mindset to manage technical challenges and drive results. You will be directly interfacing with vendors, coordinating cross-functional efforts, and collaborating with our US-based engineering team to maintain high-quality standards.

Responsibilities

• Lead the end-to-end verification and certification of test stations, ensuring they are fully operational and meet specifications.
• Conduct systematic verification of test subsystems, including fixtures, robots, stages, cameras, sensors, and environmental controls.
• Define, plan, and execute Gauge Repeatability and Reproducibility (GR&R) studies to assess measurement capabilities.
• Perform correlation testing between stations and reference systems to guarantee measurement consistency.
• Document verification results comprehensively and manage issue tracking throughout the bring-up process.
• Serve as the primary daily interface with vendors, overseeing build progress, technical issues, and design updates.
• Critically review vendor deliverables and test reports to ensure compliance with specifications and timelines.
• Support fixture Design for Manufacturing (DFM) reviews and mechanical design iterations.
• Troubleshoot mechanical, electromechanical, and fixture-related station issues, developing innovative solutions to unique challenges.
• Calibrate and maintain precision linear actuators and motion stages, ensuring repeatability, accuracy, and performance.
• Execute metrology and optical alignment tasks to uphold measurement system accuracy.
• Manage project timelines and communicate effectively with the US-based engineering team, ensuring clear status updates and documentation.

Minimum Qualifications

• BS or MS in Mechanical Engineering or a closely related field.
• 3+ years of hands-on experience with precision mechanical fixtures, test equipment, or automated test stations.
• Strong background in precision linear actuators, motorized stages, and closed-loop motion control systems.
• Experience with optical alignment processes and measurement systems.
• Proven capability in vendor management, accountability, and technical relationship handling.
• Experience with GR&R or equivalent measurement system analysis methodologies.
• Strong technical project management skills, including the ability to handle multiple workstreams.
• Demonstrated problem-solving and root-cause analysis skills in mechanical and electromechanical systems.
• Fluent in English for effective communication with the US-based team.
• Capacity to work on-site at the factory 2-5 days per week as required.

Preferred Qualifications

• Experience with industrial robotic arms, including trajectory programming and workspace verification.
• Familiarity with AR/VR or consumer electronics hardware development and verification.
• Experience with environmental controls, such as thermal management and ambient lighting.
• Proficiency in using metrology instruments like dial indicators, CMMs, laser trackers, or optical measurement systems.
• Competence in statistical analysis tools for GR&R and correlation studies.

THE ROLE

Sourcing Director - Dress & Skirt

We are seeking a Sourcing Director - Dress & Skirt to join our growing team. Use this section to give a concise overview of the role, including any unique responsibilities, scope, or context that will help candidates understand why this role matters.

Responsibilities

• Develop and implement the end-to-end supply chain and sourcing strategy for the women categories (Dress & Skirts across different fabrications, woven, knit and sweater knit), including a multi-sourcing approach to ensure resilience.
• Onboard new manufacturing partners to the Quince direct-to-consumer (D2C) model and provide coaching on operating within a rapid replenishment, M2C (Manufacturer-to-Consumer) environment.
• Educate partners on the Quince Operating System (OS), covering:
• Operational Excellence: Fostering rapid lead times and a consumer-oriented approach.
• Financial Model: Achieving high Return on Invested Capital (ROIC).
• Technical Integration: Proficient use of the Vendor Portal.

Operational Excellence & Growth

• Drive continuous improvement to achieve key performance indicators:
• Quality: Defect rate less than 0.5%.
• Speed & Accuracy: Replenishment Lead Time under 14 days.
• Availability: In-stock rate exceeding 99%.
• Financial Impact: Margin-accretive performance.
• Lead Catalog Expansion in collaboration with Merchandising and Product Development (PD) teams, successfully launching new styles and colors approved through the New Product Creation (NPC) process.
• Conduct structured Quarterly Business Reviews (QBRs) with the management of each partner, focusing on strategic alignment, business performance highlights, identified areas for improvement, and future objectives.

Qualifications

• 15+ years of a director level of Strategic Sourcing or Procurement, or Supplier Management experience operating with major US-based retailers.
• Deep set of partner factory connections within category (Dress & Skirts across different fabrications, woven, knit and sweater knit) globally, including APAC, IST and EMEA regions
• Product obsessed with experience in leveraging factories/vendor expertise to design, cost engineer, and bring products to market. With a thorough Knowledge of Key Material localised in the region
• GM mindset with a supply chain background and manufacturing (lean/ JIT) experience
• Deep understanding of cost for the categories , able to drive product cost saving thru clean sheets and apply different negotiation tactics 
• Highly organized, detail-oriented and analytical with focus on execution, problem- solving, improving processes and brand enhancement.
• Continuous learner and highly curious; always open to considering new perspectives; proactive when changing course and facing added challenges.
• Business savvy and embrace technology /AI 
• Excellent written and verbal communication, presentation, and interpersonal skills
• Bachelor’s Degree, preferred.

Supply Chain, Sourcing Strategy & Partner Management

• Develop and implement the end-to-end supply chain and sourcing strategy for the Sweater categories including a multi-sourcing approach to ensure resilience.
• Onboard new manufacturing partners to the Quince direct-to-consumer (D2C) model and provide coaching on operating within a rapid replenishment, M2C (Manufacturer-to-Consumer) environment.
• Educate partners on the Quince Operating System (OS), covering:
• Operational Excellence: Fostering rapid lead times and a consumer-oriented approach.
• Financial Model: Achieving high Return on Invested Capital (ROIC).
• Technical Integration: Proficient use of the Vendor Portal.

Operational Excellence & Growth

• Drive continuous improvement to achieve key performance indicators:
• Quality: Defect rate less than 0.5%.
• Speed & Accuracy: Replenishment Lead Time under 14 days.
• Availability: In-stock rate exceeding 99%.
• Financial Impact: Margin-accretive performance.
• Lead Catalog Expansion in collaboration with Merchandising and Product Development (PD) teams, successfully launching new styles and colors approved through the New Product Creation (NPC) process.
• Conduct structured Quarterly Business Reviews (QBRs) with the management of each partner, focusing on strategic alignment, business performance highlights, identified areas for improvement, and future objectives.

Responsibility 

• 15+ years of a director level of Strategic Sourcing or Procurement, or Supplier Management experience operating with major US-based retailers.
• Deep set of partner factory connections within Sweater category globally , including APAC , IST and EMEA regions
• Product obsessed with experience in leveraging factories/vendor expertise to design, cost engineer, and bring products to market. With a thorough Knowledge of Key Material localised in the region
• GM mindset with a supply chain background and manufacturing (lean/ JIT) experience
• Deep understanding of cost for the categories , able to drive product cost saving thru clean sheets and apply different negotiation tactics 
• Highly organized, detail-oriented and analytical with focus on execution, problem- solving, improving processes and brand enhancement.
• Continuous learner and highly curious; always open to considering new perspectives; proactive when changing course and facing added challenges.
• Business savvy and embrace technology /AI 
• Excellent written and verbal communication, presentation, and interpersonal skills
• Bachelor’s Degree, preferred.

Overview

Join our team as an In-Region Audio System Engineer, where you'll be instrumental in bridging design and manufacturing for cutting-edge wearable products. Your role will involve addressing complex engineering challenges, resolving manufacturing issues, and ensuring top-notch audio performance throughout the wearables product development lifecycle. This position offers the opportunity to collaborate with cross-functional teams to drive success from design to the final product.

Responsibilities

• Support engineering builds at contract manufacturers and FATP to ensure audio performance meets design specifications; resolve any issues to ensure quality delivery.
• Conduct thorough audio failure analysis, lead root cause investigations, and implement corrective actions to address any identified issues.
• Perform primary verification of audio performance through subjective evaluations and objective test setups, utilizing laboratory resources effectively.
• Collaborate with test engineers and equipment suppliers to develop, support, and enhance audio test station functionalities.

Minimum Qualifications

• Bachelor’s degree in Acoustics, Physics, Mechanical Engineering, Electrical Engineering, or a related field.
• Over 5 years of experience in delivering consumer audio products, demonstrating expertise in audio electronics.
• Deep understanding of audio and acoustic concepts such as Frequency Response, THD, SNR, Beamforming, and ANC.
• Proven experience with contract manufacturers, JDM, and ODM operations, along with excellent diagnostic and analytical skills.
• Proficient in utilizing audio and acoustic test and measurement tools for product evaluation and factory testing.
• Skilled in writing and troubleshooting Soundcheck sequences.
• Strong communication skills and demonstrated experience working across disciplines to drive optimal solutions.
• Willingness and ability to travel as needed.

Preferred Qualifications

• Experience in developing mobile or IoT audio devices.
• Expertise in physical acoustics and transducer design, including familiarity with acoustic simulation tools.
• Knowledge of mechanical design principles, FEA, and the application of advanced materials.
• Proficiency in MATLAB, Python, or similar programming languages for signal processing or test script development.
• Background in handling high-volume production and familiarity with Six Sigma project tools.
• Experience in audio speech quality testing and optimization using tools like B&K or ACQUA.

Responsibilities

• Debug audio chain circuits, including codecs, embedded DSPs, headphone amps, speaker amps, and microphones, as well as related external circuits like PMICs and converters.
• Achieve electrical performance targets by employing data-driven design approaches, ensuring optimal system performance.
• Perform the validation and testing of audio circuit performance and the full audio system, covering rendering, capture, power consumption, and algorithm tuning.
• Design, specify, and implement product factory tests for audio system validation.
• Collaborate effectively with internal and external hardware teams (System EE, Power/Battery) and software teams, focusing on audio system bring-up and debugging.
• Provide cross-functional leadership in audio system design to enhance and optimize audio quality.

Minimum Qualifications

• Bachelor's degree in Electrical Engineering, Physics, Acoustics or equivalent experience.
• 7+ years of experience in audio system design with a strong impact on cross-functional teams and leadership in audio quality improvement.
• Expertise in designing and debugging analog and digital circuits.
• Proficiency in product development tools such as SPICE simulation, Audio Precision, Power Supplies, Oscilloscopes, and schematic capture and PCB layout tools like OrCAD or Cadence.
• Proven experience with PCBA and product-level failure modes in both production and field settings.

Preferred Qualifications

• Master's degree in Electrical Engineering or Physics.
• Experience designing circuits for the audio chain, including codecs, DSPs, and power supplies.
• Knowledge in transducer design and developing acoustic tests for laboratory and factory environments.
• Familiarity with Android and Qualcomm audio debugging tools, including adb, QXDM, QACT, and AudioReach.
• Understanding of transistor-level IC design and the silicon manufacturing process.
• Experience in audio speech quality testing and optimization using tools like B&K or ACQUA.
• Experience with coexistence testing for audio within a full product (as victim or aggressor)

To reinvent an industry, you have to build the best team. Join Formlabs if you want to bring ground-breaking professional 3D printers to the desktop of every designer, engineer, researcher, manufacturer and artist in the world.

The Job:

• Drive the quality influence and develop the quality system in the early stages of NPI, e.g. EVT, where the customized APQP qualification process should be applied
• Drive the definition, implementation, and execution of quality plans for new and existing 3D printing hardware product.
• Work closely with cross-functional teams (Engineering, Product Management, Operations) to ensure seamless product development and launch.
• Collaborate with manufacturing partners (CM/JDM) to establish quality control processes and ensure adherence to quality standards throughout the supply chain
• Develop the sub-tier suppliers qualification process
• Analyze data, lead DOE, identify root causes of failures, and drive corrective actions with engineering, manufacturing, and CM/JDMs.
• Lead failure analysis investigations and implement robust corrective and preventive actions (SCAR).
• Lead the development and improvement of quality management systems and processes from scratch.
• Champion quality throughout the organization and foster a culture of continuous improvement. 

You:

• Bachelor's or Master's degree in Engineering (Mechanical, Electrical, Industrial, or related field). Overseas degree is a big plus
• 8+ years of experience in hardware quality engineering, preferably in consumer electronics, robotics, or a related industry. Experience with complex electromechanical systems is highly desirable.
• Strong understanding of statistical analysis, data interpretation, and problem-solving techniques. A six sigma green/black belt is a big plus.
• Experience with JMP, Minitab, or other statistical software is a must Familiarity with quality management systems (e.g., IATF) and quality tools (e.g., FMEA, Control Plans).
• Startup mindset and willingness to do hands-on work in a highly dynamic environment
• Ownership and self-motivated 7.SQL/Python is a big plus
• Up to 40% travel, most in Pearl River Delta
• Excellent English capability - speaking, listening, reading and writing

We Offer:

• An inclusive, dog-friendly office with diverse and inspiring colleagues
• Shares in the company (we’re a Unicorn company)
• Development opportunities both in-house and off-site
• Catering 3x per week, free beverages and snacks
• Discount for Urban Sports Club
• Unlimited 3D prints
• Fun team events

Perks are subject to adjustments and may vary from team to team.

We build amazing things.  Come join us!

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Even if you don't check every box, but see yourself contributing, please apply. Help us build an inclusive community that will change the face of 3D printing.

Department：Avatar

职位：制造大模型算法工程师（Downstream）

职责描述：

1. 与资深制造大模型算法工程师合作，开发基于多模态电池基础大模型的下游应用。
2. 参与开发和优化多个具体应用模型，包括电芯质量评估模型、生产过程优化模型、电芯设计优化模型、电芯性能预测模型以及电芯设计生成式模型。
3. 协助实施和优化数据处理管道，确保数据准确性和一致性，以支持下游应用开发。
4. 应用机器学习和深度学习技术进行模型训练、验证和优化。
5. 分析和处理复杂的数据集，提取关键特征以改进模型性能和应用效果。
6. 协助跨职能团队理解业务需求并制定相应的技术实现方案。
7. 持续跟踪最新技术发展，协助引入前沿方法提升模型应用效果。

任职资格：

1. 计算机科学、电子工程、统计学或相关领域的硕士学位。
2. 至少3年以上在机器学习或AI领域的实际工作经验，有制造业或电池生产相关经验者优先。
3. 熟悉机器学习和深度学习算法，具备多模态数据处理与应用开发经验者优先。
4. 熟练掌握Python、TensorFlow、PyTorch等常用的机器学习框架和工具。
5. 具备处理表格数据、时序数据和图像数据的能力，并能够将这些数据应用于具体的模型开发。
6. 良好的沟通能力和团队协作精神，能有效与跨职能团队合作。
7. 具备良好的问题解决能力和学习新技术的意愿。

Responsibilities:

1. Cooperate with senior AI/ML engineers to develop downstream applications based on multi-mode battery basic large model.
2. Participate in the development and optimization of multiple specific application models, including cell quality assessment model, production process optimization model, cell design optimization model, cell performance prediction model and cell design generative model.
3. Assist in implementing and optimizing data processing pipelines to ensure data accuracy and consistency to support downstream application development.
4. Apply machine learning and deep learning technology for model training, verification and optimization.
5. Analyze and process complex data sets, extract key features to improve model performance and application effect.
6. Assist cross-functional teams to understand business requirements and develop corresponding technical implementation plans.
7. Continue to track the latest technological development and help introduce cutting-edge methods to improve the application effect of the model.

Qualifications:

1. Master's degree in computer science, electrical engineering, statistics or related field.
2. At least 3 years of practical working experience in machine learning or AI field, manufacturing or battery production experience is preferred.
3. Familiar with machine learning and deep learning algorithms, multi-modal data processing and application development experience is preferred.
4. Proficient in Python, TensorFlow, PyTorch and other commonly used machine learning frameworks and tools.
5. Have the ability to process tabular data, time series data and image data, and can apply these data to specific model development.
6. Good communication skills and team spirit, able to effectively work with cross-functional teams.
7. Good problem-solving skills and willingness to learn new technologies.

Process Engineer (Senior Engineer / Engineer)

Responsibilities

• Responsible for the development of new products, new materials and new processes, and responsible for the manufacturability analysis and mass production introduction of evaluation products

• Put forward the process optimization plan, carried out verification and result analysis, and completed the formulation, implementation and update of process documents

• Responsible for the analysis and defect improvement of adverse problems in the battery production process, identification of possible failure modes in the mass production process of new product introduction, and output effective process control methods

• Responsible for product process route and data collection and maintenance

• Responsible for process optimization, improvement of process flow and parameters, and improvement of optimal rate

Qualifications

• Bachelor’s degree or above, major in material, chemistry, mechanical science and engineering

• More than 3 years of experience in lithium battery technology or product development

• Familiar with the manufacturing process standards of lithium batteries

• Good team communication skills

To reinvent an industry, you have to build the best team. Join Formlabs if you want to bring ground-breaking professional 3D printers to the desktop of every designer, engineer, researcher, manufacturer and artist in the world.

The Industrial Design team enables accessible and productive experiences for our users and communicates the values of the brand through beautiful, functional hardware design. As part of our team, you’ll collaborate with an interdisciplinary team of designers, engineers, and scientists to make a significant impact on a rapidly-emerging class of products. If you are passionate about delivering great user experiences and have the skills to contribute, we want you to join our team.

Sharing a portfolio/website that reflects your work or projects is required.

The Job:

• Ensure that interacting with our products are great experiences
• Prototype continuously and test designs with users through interviews and surveys
• Manage all aspects of the hardware user experience, from unboxing to maintenance
• Design beautiful products that people love to use, from idea to production
• Develop design concepts with clear and compelling visual communication
• Create high-quality CAD to communicate design intent
• Collaborate closely with Product, UI Design, Engineering, and Manufacturing to develop well-balanced solutions

You:

• 2+ years of relevant professional experience developing products with strong interactive elements and experience
• Obsessive attention to detail
• Proven track record of designing products and bringing them to market
• Actively involved in the day-to-day design of products 
• Demonstrable knowledge of relevant manufacturing processes
• Experience solving complex problems with engineering and manufacturability constraints
• Demonstrate fluency in aesthetic decision-making and an eye for detail
• Able to communicate quickly and effectively with hand sketches
• Capable in 3D CAD, Keyshot, and Adobe CC
• Comfortable prototyping using a variety of methods

Bonus Skills:

• Passion for 3D printing and emerging technologies
• Experience in rapidly-growing startup environments

We Offer:

• An inclusive environment with diverse and inspiring colleagues
• Shares in the company (we’re a Unicorn company)
• Unlimited 3D prints
• Fun team events

Perks are subject to adjustments and may vary from team to team.

We build amazing things.  Come join us!

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Even if you don't check every box, but see yourself contributing, please apply. Help us build an inclusive community that will change the face of 3D printing.

To reinvent an industry, you have to build the best team. Join Formlabs if you want to bring ground-breaking professional 3D printers to the desktop of every designer, engineer, researcher, manufacturer and artist in the world.

We’re excited to build devices that not only perform remarkably and create beautiful parts but also reflect careful user experience design. You will be architecting, prototyping, building, and designing the hardware systems of our next generation 3D printers. You will be responsible for key system decisions that affect the final performance and reliability of the products.

If you want to lead the design and create the tools you would love to use yourself, we want you as a Mechanical Engineer.

 The Job:

• Push the capabilities of 3D printing by creating innovative solutions to challenging problems
• Be a technical leader within the region and group of mechanical, systems and electrical engineers, designing, reviewing and guiding junior colleagues’ work
• Prototype new systems, mechanisms, test materials, and research 3D printing challenges
• Architect the numerous subsystems of a 3D printer or processing appliance for performance, manufacturability and reliability
• Engineer the most amazing 3D printer ecosystem on the market

You:

• Can share a strong portfolio of previous work with a background in electro-mechanical systems
• Want to build a precision tool that is beautiful inside and out
• Familiar with thermal systems, optical systems, sensor design, controllers, structures and algorithms
• Enjoy the gritty details of part design, material selection and manufacturing techniques
• Craft elegant systems that function with efficiency and simplicity
• Can communicate effectively with vendors, suppliers and team members across the globe
• Are familiar with a variety of manufacturing methods for creating high-volume and high performance products
• Are hands on and can work across disciplines to prototype your own designs and solve problems
• Have experience with the full product development cycle
• 5+ years industry experience

Bonus Skills (Optional): 

• Familiar with polymers and polymer chemistry
• Electronics and circuit design
• PLM/document control systems
• Programming skills (Python)
• Industrial design
• Tool Design for sheet metal and injection molding

Our Perks & Benefits:

• An international work environment with diverse and inspiring colleagues
• Shares in the company (we’re a Unicorn company)
• Unlimited 3D prints
• Fun team events

We build amazing things.  Come join us!

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Even if you don't check every box, but see yourself contributing, please apply. Help us build an inclusive community that will change the face of 3D printing.

About Peak Design

ABOUT THE ROLE

Are you passionate about building the best possible hard goods?

We are looking for a driven, creative, and fun-loving Manufacturing Engineer to join our team and help us redefine the world of hard goods.

As a engineer, you will be responsible for ensuring the successful mass production of our existing and new hard goods product designs. You will collaborate closely with our hard goods product operations team, designers, Project Managers, external manufacturers, and suppliers to ensure that our lifetime guaranteed products are built to last. You will also be responsible for assisting inspections per outgoing shipment, maintaining, troubleshooting, and improving our existing product lines.

We are looking for someone who is passionate about building top-of-the-line gear that is functional, beautiful, and cost-effective. You will also be responsible for staying up-to-date on the latest trends in soft goods design.

We believe that hard goods can be both functional and beautiful, and we are committed to creating products that meet the needs of our customers while also pushing the boundaries of design. If you are someone who is passionate about goods and who is excited to be a part of a team that is redefining the world of hard goods, we encourage you to apply.

Join our team and help us make the world a better place, one carry solution at a time.

Here are some of the things that make this role unique and exciting:

• You will have the opportunity to work on a variety of projects, from small tweaks to major overhauls.
• You will be able to collaborate with a talented team of designers, engineers, and manufacturers.
• You will have the opportunity to make a real impact on the quality of our products.
• You will be part of a company that is committed to sustainability and social responsibility.

RESPONSIBILITIES

• Work with PD team, design team, and global colleagues on new product introduction, understanding the requirements of the goods, and providing suggestions to improve
• Making recommendations for DFM, sourcing for suppliers, cost and terms negotiations and feedback improvements to design team
• Review manufacturing programs for factory and major vendors, and identify areas for improvement. This includes ensuring that their manufacturing processes are in place, proper controls, and documentation
• Work on golden samples, sign off the details, and maintain revisions
• Update engineering documents to reflect changes in production or ECOs. This includes updating documents to reflect any changes in production or engineering change orders (ECOs), and ensuring that all relevant documentation is up to date and accessible to the appropriate personnel.
• Assist in root causes of development  issues and implement corrective actions. This includes working with the factory to investigate the root causes, implementing corrective actions, and ensuring that the corrective actions are effective and that issues do not recur in MP
• Organize and maintain critical documentation and communications related to product manufacturing. This includes organizing and maintaining critical documentation and communications related to product manufacturing, ensuring that all relevant documentation is up to date and accessible to the appropriate personnel.
• Communicate with Peak Design product operations on the status of production and identify potential issues early on. This includes communicating regularly with Peak Design product operations on the status of production, providing feedback on the quality of our products as they are being manufactured, and identifying any potential issues early on.
• Stay up-to-date on the latest trends in hard goods design and manufacturing, and work with designers and engineers to implement improvements. This includes staying up-to-date on the latest trends in goods design and manufacturing, and working with our designers and engineers to implement improvements that will help us to create the highest quality products possible.
• Develop test plans, execute them, and analyze results to ensure new product designs meet performance requirements. This includes developing test plans that are specific to each product design, executing the test plans, and analyzing the results to ensure that new product designs meet our performance requirements.

ABOUT YOU

• Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field.
• Basic English proficiency with clear verbal and written communication skills for Zoom and email collaboration.
• 3D CAD design experience with real parts or fixtures; SolidWorks or Onshape preferred but not required.
• Step into an exciting and important role where you will be responsible for transforming ideas into reality and collaborating closely with sewing factories to bring products to mass production for consumers.
• Embrace the thrill of working with goods vendors and bringing top-of-the-line, functional, beautiful, and cost-effective products to market.
• Be passionate about your work and be someone who is detail-oriented and analytical.
• Be able to work independently and as part of a team, and have excellent communication and interpersonal skills.
• Be able to work under pressure and meet deadlines, and be willing to travel.
• Be up-to-date on the latest trends in goods design and manufacturing.
• Be creative and innovative, with a keen eye for quality.
• Be a problem-solver with a proven ability to identify and resolve quality issues.
• Be a team player with a strong work ethic and a commitment to excellence.
• Be dedicated to creating the highest quality products possible.

Preferred Qualifications

• You use and care a lot about gear (photography, outdoor, or other passion areas). 
• You have strong opinions about the products that you use in your life and enjoy debating what makes these products great.
• You’re a systems thinker and love optimizing workflow and efficiency - you are capable of navigating surprise roadblocks with rational thinking and problem solving.

ADDITIONAL REQUIREMENTS

• Must legally reside and work in China
• Ability to work on-site at our factories