• Responsibilities/Duties:

  Tasks

• Full penetration butt weld 6G test
• Weld components in flat, vertical, or overhead positions.
• Operate safety equipment and use safe work habits.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Ability to use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools
• Ability and willingness to stand, walk, bend, squat and lift objects for long periods of time
• Ability and willingness to lift and carry material weighing up to 50 lbs
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Weld separately or in combination, using stainless steel, and other alloys.
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.

• Work Duties

• Controlling Machines and Processes
• Handling and Moving Objects
• Identifying Objects, Actions, and Events
• Operating Vehicles, Mechanized Devices, or Equipment
• Communicating with Supervisors, Peers, or Subordinates
• Getting Information
• Performing General Physical Activities
• Inspecting Equipment, Structures, or Material
• Thinking Creatively
• Training and Teaching Others

• Detailed Work Duties

• Adjust equipment controls to regulate gas flow.
• Align parts or workpieces to ensure proper assembly.
• Apply protective or decorative finishes to workpieces or products.
• Assemble metal or plastic parts or products.
• Assemble metal structures.
• Assemble temporary equipment or structures.
• Clean production equipment.
• Clean workpieces or finished products.
• Cut industrial materials in preparation for fabrication or processing.
• Design templates or patterns.
• Determine metal or plastic production methods.
• Disassemble equipment for maintenance or repair.
• Drill holes in parts, equipment, or materials.
• Estimate material requirements for production.
• Fill cracks, imperfections, or holes in products or workpieces.
• Heat material or workpieces to prepare for or complete production.
• Ignite fuel to activate heating equipment.
• Lay out parts to prepare for assembly.
• Maintain inventories of materials, equipment, or products.
• Mark products, workpieces, or equipment with identifying information.
• Measure dimensions of completed products or workpieces to verify conformance to specifications.
• Melt metal, plastic, or other materials to prepare for production.
• Monitor equipment operation to ensure that products are not flawed.
• Mount materials or workpieces onto production equipment.
• Notify others of equipment repair or maintenance needs.
• Operate grinding equipment.
• Operate metal or plastic forming equipment.
• Operate welding equipment.
• Repair parts or assemblies.
• Reshape metal workpieces to established specifications.
• Review blueprints or other instructions to determine operational methods or sequences.
• Select production equipment according to product specifications.
• Shape metal workpieces with hammers or other small hand tools.
• Signal others to coordinate work activities.
• Smooth metal surfaces or edges.
• Solder parts or workpieces.
• Trim excess material from workpieces.
• Watch operating equipment to detect malfunctions.

• Education, Work Experience, Skill Requirements & Certifications:

• Minimum Education (or substitute experience) required:
• High School Graduate or GED equivalent/Some college preferred.
• Minimum Experience required:
• Minimum (2-5+) years of proven experience as a Welder
• Experience using a variety of welding equipment and proper operating procedures (TIG, MMA, blow torch etc.)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Skills Required:
• Controlling operations of equipment or systems.
• Watching gauges, dials, or other indicators to make sure a machine is working properly.
• Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
• Determining the kind of tools and equipment needed to do a job.
• Repairing machines or systems using the needed tools.
• Minimum License, Certifications & Affiliations/Memberships and CEU’s
• Valid California driver’s license and an insured vehicle in good working order.
• Professional Certification (e.g. an AWS welding certificate) will be a plus.

• Special Requirement:

• May be required to work weekends and holidays as business necessitates; schedules will be determined by management with at least 48 hours advance notice.

• Work Environment:

• Working in the shop, the following conditions may apply:
• Includes exposure to sounds and noise levels that are distracting or uncomfortable
• Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, and resistance welding.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

About Crane: ChemPharma & Energy

Crane ChemPharma & Energy designs and manufactures a variety of high-performance products including highly engineered check valves, sleeved plug valves, lined valves, process ball valves, high-performance butterfly valves, bellows sealed globe valves, aseptic and industrial diaphragm valves, multi/quarter-turn valves, actuation, sight glasses, lined pipe, fittings and hoses, and air operated diaphragm and peristaltic pumps. Its trusted brands offer customers a complete and innovative product portfolio designed for the most demanding corrosive, erosive, and high purity applications. Primary industries served include chemical and petrochemical processing, biotechnology, pharmaceutical, and general industrial. As an integrated fluid handling solutions provider, Crane ChemPharma & Energy is well equipped to respond to complex global projects with comprehensive product packages and timely proposals to simplify our customers’ supply chain on a local level worldwide, at competitive market pricing.

#CPE

#LI-VD1

Salary/Hourly Range: $25.75 to $34.24. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Compensation packages also include comprehensive benefits, 401K contribution and match, Paid Time Off, paid holidays, tuition reimbursement and more. Some roles may be eligible for participation in performance-based bonus programs.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.