Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are currently looking for qualified candidates for a Mechanical Engineer position. Will require experience with process equipment systems, in a manner in which equipment is operated, safety system design and compliance codes, and with facility troubleshooting as related to oil and gas production. 

Responsibilities:

• Perform job responsibilities as Lead Engineer, leading discipline on medium projects or assigned under the direction of the Department Manager and/or Project Engineer for larger projects
• Ensure adherence to project specifications, governing codes and standards, and good engineering practice
• Ensure adherence to project health, safety, security and environmental (HSSE) requirements as well as state and federal regulations
• Monitor the schedule, ensure that project objectives are met, monitor project controls and engineering execution within the approved budget
• Responsible for reporting on engineering, design and equipment development status to the Lead Mechanical Engineer, and performing monthly or bi-weekly assessments of progress
• Participate and contribute advanced level development of all phases of project engineering, including detail design and construction support
• Experience in development of upstream production facility drawings, checking process equipment system designs and participation in hazard reviews performed to API
• Develop the technical content of Mechanical equipment calculations, specifications and data sheets for inquiry and purchase. Ensure these documents are appropriately reviewed, approved, and transmitted
• Has direct communication with equipment manufacturers and works clarifications to resolution.
• Typical equipment includes Vessels, Heat Exchangers, Fired Equipment, HVAC, Pumps, Compressors.  General knowledge of applicable codes and standards.
• Procedure development including start-up, commissioning, operating and maintenance.
• Coordinate and incorporate project requirements and standards.
• Develop Mechanical Work Plans for the installation of equipment
• Initiate Project Deviation Notices that impact the mechanical specifications, effort-hour budget and/or schedule
• Coordinate and cooperate with the Engineers of other disciplines to ensure the smooth flow of all information, and to ensure alignment with project requirements and design basis
• Initiate and runs status meetings with the mechanical team to discuss project issues, coordinate/plan key milestone efforts, etc.
• Responsible for obtaining cost related information and developing scope of work documents for project estimates (e.g., TIC estimates)

Qualifications:

• Bachelor’s degree or Master’s degree in Mechanical Engineering from an accredited college or University
• 5+ years of overall experience on capital projects from feasibility through construction
• Familiarity with various project phases and the scope/deliverables required
• Advanced MS Office skills (Word, Excel, OneNote) preferred
• Excellent oral and written communication skills in English required
• Registered Professional Engineering license preferred
• Ability to train and travel to live facilities preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a talented civil engineer to join our team who will produce engineering documents for the site preparation, grading, drainage, roads, and paving for our facilities.  This position will serve multiple roles with the goal of ensuring efficiently produced high quality civil engineering documents for our projects. The ideal candidate should be efficient, detail oriented, and able to keep track of multiple tasks with separate deadlines.

This position will report to the Civil Engineering Manager. This position is located in our Downtown Houston office and is a Monday-Friday in-office position.

Key Responsibilities:

• Develop calculations, quantities, reports, drawings, and specifications for the civil sitework scope of engineering of the project.  Seal and sign the final civil engineering documents.
• Collaborate with and support other disciplines, subconsultants, project controls, project management, and others
• Perform all functions within the civil engineering and design team as needed to create examples or meet deadlines

Qualifications:

• Bachelor's degree in Civil Engineering
• 2 to 5 years of relevant experience
• Sufficient experience and knowledge with oil, gas, and chemical facilities and preferably within an EPC company
• Skill in oral and written communication

Software Knowledge:

• AutoCAD
• Experience using a graphically to-scale integrated hydrology and hydraulics site drainage software such as EPA SWMM, PCSWMM, Storm and Sanitary Analysis (SSA), or InfoDrainage.
• Autodesk Civil 3D (preferred but not required)

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Designer, Piping and Instrumentation Diagram. This position will report to the Manager, Piping and Instrumentation Diagram.

This position is located in Downtown Houston. Work schedule is Monday - Friday in office.

The Senior Designer, Piping and Instrumentation Diagram is responsible for interpreting and creating Piping and Instrumentation Diagrams (P&IDs), which are detailed engineering drawings that visually represent the layout of a process system, including piping, equipment, and instrumentation within an industrial facility; essentially, they are experts in understanding the intricate details and symbols used on P&IDs, allowing them to analyze process flow, identify potential issues, and ensure accurate design and operation of the system. 

Responsibilities:

Understanding of and ability to work with process engineering:

• Strong grasp of block flow, process flow, material selection diagrams, as well as the different types of equipment used in various industries. 
• Strong understanding of project/CAD life cycles and workflows.
• Ability to clearly comminute via phone, email, and in meetings.

 Proficient in P&ID symbols and standards:

• Accurately interpret and utilize the standardized PIP symbols used on P&IDs, including those related to valves, pumps, instruments, and safety devices. 

 Experience in design and review:

• Review P&IDs for accuracy, consistency, and compliance with engineering standards, identifying potential design flaws or safety concerns. 
• Experience running P&ID Teams of four users or more with High Value Centers.

 Knowledge of relevant software:

• Experience with the P&ID design software is required.
• 7+ years of experience SmartPlant P&ID
• 2+ years of experience with AutoCAD/MicroStation

Roles where a P&ID Lead Designer might be involved:

 Project engineering teams:

• Contribute to the development and review of P&IDs during all phases of a project. 
• Understanding of Pre-FEED, FEED, Detail Design, and EPC aspects of Capital Projects.

Operations and maintenance teams:

• Analyze P&IDs to troubleshoot issues, plan maintenance activities, and understand system modifications. 
• Understanding of the needs of Plant Operations and Owner P&ID use and functionality.

 Quality assurance teams:

• Ensure compliance with regulatory standards and internal procedures related to P&ID documentation. 
• High understanding of the Database over picture needs, as well as the ability to do project wide picture and data audits.

 Training and development:

• Provide training to engineers and technicians on how to read and interpret P&IDs effectively.
• Mentor other team members when assigned to your projects, or if they ask for help.

Qualifications:

• Associate degree in science/art or relative field
• 3 or more years of experience as a SPPID Project Drafting Lead
• Experience as a CAD Lead Designer preferred
• Good knowledge of P&ID design software like SmartPlant P&ID or AutoCAD 
• PID/PFD/MSD/BFD drafting experience required
• Able to commute to Downton Houston office Monday - Friday

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Venture Global is seeking an Project Engineering Manager to join our team.

The Senior Project Engineer will have the following responsibilities:

• Focal point for technical issues/coordination between EPC and owner furnished equipment suppliers. Liaise with home office engineering for the resolution of technical issues that cannot be resolved at site.
• Participate in project safety program through safety walks, attending safety reviews, and providing safety input into designs, procedures, and activities.
• Manage liquefaction scope RFI process between EPC and Owner Furnished Equipment suppliers.
• Review drawings issued by EPC and equipment suppliers.
• Identify quality issues related to defective or non conforming workmanship or materials. Work closely with construction team to ensure that contractors produce the required quality of work in line with project drawings and specifications.
• Research code issues and obtain necessary approvals with subject matter experts
• Attend kick-off and review meetings while interacting with EPC Contractors.
• Support systems completion process including completion of ITRs and PLIs. Ensure punch list items are prepared, collated and cleared expediently.
• Support commissioning activities for liquefaction systems. Ensure systems are complete and pre-requisites have been completed.  Coordinate interfaces as required.
• Support management of change processes.
• Review installation plans, documents, and requirements specific to area of responsibility and ensure requirements are clearly communicated to construction team. Actively support constructability program and communicate constructability issues to discipline engineers.
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Assist in development and review of turnover dossiers.
• Attend project progress meetings and deliver a status of site engineering activities.
• Build relationship with contractor project engineering counterparts.
• Understand contractual requirements and communicate these to team
• Actively support safety, quality, schedule and cost objectives

 Basic Qualifications

• Bachelor’s degree in Mechanical or Chemical Engineering
• Minimum 5 years of experience with design, construction, or operation of petrochemical infrastructure. Experience representing asset owner in these roles is a plus.
• Broad base of general engineering knowledge including mechanical, electrical, and I&C.
• Team player with a mindset to work with a global team and with diverse cultures
• Experience working on projects with multiple interfaces.
• The candidate will be required to travel domestically.
• Must exhibit a strong desire to take ownership of deliverables
• Experience with cryogenic or liquefaction systems is a plus.
• Experience with systems completion, commissioning, or turnaround activities is a plus.
• Able to read detailed construction drawings and specifications detailing the system design, including P&IDs and one lines
• Excellent technical, practical, and communication skills.

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Senior Smart Reference Data (SRD) to join our team in Houston. In this role you will work with Smart tool administrators, Engineering and Design Departments to provide operational support for development and maintenance of piping specifications, specialty items in SRD. This person will be responsible to bulkload piping specs in S3D catalog and make the necessary configurations to ensure that all spec components can be placed correctly in the Smart3D (S3D) model and are represented appropriately on deliverables such as Isometrics and Reports. This person will lead and mentor other team members supporting piping specification development and update in SRD. This person must have a working knowledge S3D modeling environment and must have the ability to configure and troubleshoot issues related to piping specifications.

This position will report to the Director of Engineering Technology

Responsibilities:

Duties and responsibilities include but are not limited to:

• Setup and configure the SRD instance for Venture Global standard pipe specs, in collaboration with IT, Engineering Technology admins, and Project Engineering teams.
• Setting up and managing new and existing engineering projects within Smart Reference Data (SRD).
• Providing user-support to project resources on SRD, S3D specs, and other related issues as needed.
• Creating and managing Pipe specifications in SRD throughout the project lifecycle.
• Coordinating with Piping Spec/material engineers on new spec requests and spec markups as needed.
• Understanding and following Venture Global’s standard work processes for creating new specs and managing spec changes through the project lifecycle.
• Develop and maintain SQL/SSRD/PowerBI reports for SRD data to manage and maintain engineering data.
• Develop procedures/workflows, and automation solutions for checking and validating MOC impacts across SRD and S3D.
• Interfacing directly with software vendor to escalate issues (bugs) and request new functionality to support Venture Global’s standard workflows, which needs a strong technical understanding of the software applications.
• Mapping Iso SKEYS correctly for each component type to ensure standard output on deliverables.
• Developing bulkload sheets for Specialty Items (SP items) as per project request and make them available in S3D catalog as tagged items.
• Bulkloading pipe specs and catalog changes from SRD to Smart3D (S3D) catalog.
• Coordinating with the project design teams to ensure that the S3D model is in synchronization with latest catalog changes.
• Verifying the component placement in SP3D using Catalog Placement tester utility.
• Customize report templates for automating spec report generation using APEX Office Print (AOP) and issuing paper specs.
• Troubleshooting component placement issues in S3D in coordination with S3D support team.
• Troubleshooting ToDo list errors related to catalog changes in S3D.
• Continually seeking opportunities to increase end-user experience.
• Documenting changes and work processes. Must be able to communicate effectively with project teams, and management while maintaining a structured approach of working within a larger integrated engineering solution.

Required Qualifications:

• Bachelor’s degree in materials, mechanical, chemical engineering or similar engineering discipline.
• 8+ years or more experience in Smart Reference Data administration, configuration, development, and version upgrade.
• Strong understanding of ASME piping code and standards.
• Thorough knowledge of SRDPlus interface is a must.
• Experience with upgrading major versions of SRD
• Experience in using Smart3D (S3D) and Catalog placement tool.
• Proficient with S3D Piping modeling functionality and ability to configure/generate Isometric drawings from S3D.
• Relevant engineering and/or construction industry experience is preferred.
• Strong analytical and problem-solving skills.
• Highly motivated and self-directed with strong communication skills
• Experience as a technical leader and/or team lead is a plus.

Preferred Qualifications:

• Completion of admin and user training for Smart Reference Data.
• Knowledge in customization of Symbol Editor using VB .NET symbols for components – custom symbols.
• Strong knowledge of methods for data-centric execution.
• Experience in piping design, and material engineering is a plus.
• LNG project execution experience preferred
•  

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Senior Project Engineer, Electrical  to join our team in the site project engineering team in Houston, TX

The role will be part of a team responsible for ensuring that the Plant Electrical System operates as per design, in a safe and reliable manner with minimal downtime.  

 Responsibilities: 

• Interface for all site switchgear, power controls technical alignment
• Provides input to weekly site engineering report
• E-house / power systems RFI Owner
• Inspect major arriving equipment and participate on walk downs
• Maintain log of scope transferred to site and participate in interface meetings between EPC and OFE contractors
• Assist with E-House FAT testing at the supplier's shops and minimize carryover punch list to the site prior to shipment.
• This position reports to the CP2 Project Engineer Manager (Electrical Buildings)

Education, Qualifications & Experiences: 

• Bachelor’s degree in Electrical Engineering, preferably with specialization in Power Systems.
• Minimum 10 year’s experience working with electrical systems.
• Experienced with domestic and/or International electrical codes and standards. Including NEC, NFPA, NETA, and ANSI
• Familiarity with Power Systems Modeling Tools such as ETAP/SKM preferable
• Experience in LNG liquefaction facilities highly preferred.
• Experience with: 

• • Switchgears (13.8kV, 4.16kV, 480V)
  • Motor Control Centers (MCC)
  • Uninterruptible Power Supplies (UPS)
  • Transformers
  • Energy Management Systems (EMS/SCADA)
  • Electrical System Studies 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost 

We are seeking a Senior Mechanical Engineer - Static Equipment.

This position will be located at our Downtown Houston office and is a Monday-Friday position.

Responsibilities: 

• Mechanical MOC/HAZOP signoff
• Site mechanical technical authority
• VG engineering sign off on static equipment internal inspection / readiness
• Validation of pneumatic test packs and exclusion zone calculation
• Provides input to weekly site engineering report
• Review surveyor deliverables and assist with fit up / interface misses at site 

Qualifications: 

• Bachelor of Science degree in Mechanical Engineering
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Static Equipment. Experience representing asset owner in these roles is a plus.
• Experience in LNG liquefaction facilities highly preferred.
• Fire Equipment experience a must.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Knowledge of applicable ASME and API standards.
• Experience with systems completions.
• Strong understanding of the design and operation of heat exchangers and process piping.
• Exhibit excellent written and oral communication skills 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking qualified applicants for the position of  Project Engineering Manager - MAR.  This position is based out of our Calcasieu Pass LNG 2 (CP2) facility located in Cameron, Louisiana.  

  Responsibilities: 

• Primary site interface for all MAR engineering technical alignment 
• Provides input to weekly site engineering report 
• MAR RFI Owner 
• Responsible for MAR punch list resolution 
• Validate check sheets and sign A and B ITRs as needed, working with the site coordinators 
• Review EPC engineering work packs for accuracy and content 
• Review installation / erection / precommissioning plans, documents, and requirements specific to areas. Includes review of installation manuals, communication of specific requirements, sequences, etc to coordinators 
• Inspect major arriving equipment and participate on walk downs 
• Maintain log of scope transferred to site and participate in interface meetings between EPC and OFE contractors

Qualifications: 

• Bachelor's degree in engineering.
• Professional accreditation such as a PMP or similar.
• Minimum of ten (10) years’ experience in Project Engineering/Management with at least 4 years in the LNG industry.
• Expert Knowledge of project management systems and principles with extensive knowledge of working with Engineering and Management teams to set up tools for operational readiness, performance monitoring and reporting requirements. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Associate Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities: 

• Candidate will develop knowledge and understanding of the complete Plant Instrument and Control system equipment and will be assigned tasks including but not limited to:  

• • Field Instrumentation for process measurement (e.g., Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, etc.).
  • Plant Instrumented Control and Safety Systems, Fire and Gas Systems, and Programmable Logic Controllers.
  • Schematic drawings, location drawings.
  • Support the development of:  
  • Field instrumentation specification and data sheets
  • Key Performance Indicators & Metrics for Instrument and Controls
  • Instrument control drawings and databases.
  • Instrument Requisition and Technical Evaluation.
  • P&IDs
  • Support with the Management of Change (MOC) process
  • Support Root Cause Failure Analysis (RCFA) process 

Qualifications: 

• BS. or higher degree in Electrical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• One (1) to four (4) years’ experience working as an Engineer in a process plant environment would be a plus. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities:

• Apply technical expertise to support design, installation, commissioning, and operation of instrument and controls systems as subject matter expert.
• Troubleshoot and solve controls logic and communication issues.  
• Participate in check out of cause and effects, complex loops, etc.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Controls, Instrument or Electrical Engineering
• A Professional Engineering License or eligibility for registration. 

• Experience: 
• A minimum of five-ten years’ experience working in a senior engineering capacity, with Instrument & Controls equipment in an industrial setting in engineering or operations.
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Good working knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required 
• Additional Skills: 
• Working knowledge of CMMS Systems
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Venture Global is seeking a Power Project Engineer to join our team in Plaquemines, LA.

This role will be based at our Plaquemines LNG facility that is located in Point Celeste, LA.

The Power Project Engineer will have the following responsibilities: 

• Focal point for technical issues/coordination between EPC and owner furnished equipment suppliers. Liaise with home office engineering for the resolution of technical issues that cannot be resolved at site.
• Participate in project safety program through safety walks, attending safety reviews, and providing safety input into designs, procedures, and activities.
• Manage power island RFI process between EPC and Owner Furnished Equipment suppliers.
• Review drawings issued by EPC and equipment suppliers.
• Identify quality issues related to defective or non conforming workmanship or materials. Work closely with construction team to ensure that contractors produce the required quality of work in line with project drawings and specifications.
• Research code issues and obtain necessary approvals with subject matter experts
• Attend kick-off and review meetings while interacting with EPC Contractors.
• Support systems completion process including completion of ITRs and PLIs. Ensure punch list items are prepared, collated and cleared expediently.
• Support commissioning activities for power island systems. Ensure systems are complete and pre-requisites have been completed.  Coordinate interfaces as required.
• Support management of change processes.
• Review installation plans, documents, and requirements specific to area of responsibility and ensure requirements are clearly communicated to construction team. Actively support constructability program and communicate constructability issues to discipline engineers.
• Understand industry standards, applicable regulatory codes and requirements, and company standards.
• Assist in development and review of turnover dossiers.
• Attend project progress meetings and deliver a status of site engineering activities.
• Build relationship with contractor project engineering counterparts.
• Understand contractual requirements and communicate these to team.
• Actively support safety, quality, schedule and cost objectives

 Qualifications

• Bachelor’s Degree in Mechanical Engineering or Electrical Engineering is require
• Minimum 5 years of experience with design, construction, or operation of electrical power distribution systems and power generation equipment. Experience representing asset owner in these roles is a plus.
• Team player with a mindset to work with a global team and with diverse cultures
• Must exhibit a strong desire to take ownership of deliverables
• Experience with water treatment systems is a plus.
• Experience with systems completion, commissioning, or turnaround activities is a plus.
• Able to read detailed construction drawings and specifications detailing the system design, including P&IDs and one lines
• Working knowledge of power generation rotating equipment operation include gas turbines, steam turbines, and pumps.
• Excellent technical, practical, and communication skills.
• The candidate will be required to travel domestically
• Experience working on projects with multiple interfaces.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Safety Engineer to join our team in Houston, TX with travel to site as required by Supervisor.  This role reports to the Manager, Process Safety and will be responsible for ensuring that operations are conducted safely, efficiently, and effectively.

This position is located in our Downtown Houston office and is a Monday - Friday in-office positions.

Key Responsibilities/Accountabilities:

• Provide technical and engineering leadership on all process safety management elements such as MOC, PSSR, PHA, building siting, process design.
• Provide process safety and engineering guidance to communicate and evaluate process safety risks.
• Ability to recommend and implement process safety improvement opportunities by staying abreast of industry trends and technology.
• Day to day guidance of Process Safety Barrier Health reporting.
• Responsible for management/leadership on PHA/LOPA teams, including review and approval of associated action items.
• Responsible for leadership in process safety event (PSE) investigations.
• Assist in developing and delivering training programs, keeping them updated in accordance with changes in technology and industry best practices.
• Responsible for providing technical assurance on overall operational risk. These processes include:
• Car sealing
• Procedures – initial start-up and SOP and red line revisions
• Process Safety Event Reporting
• 5-why or root cause analysis (RCA)
• Permit to Work
• SIMOPs
• Inhibits / Bypasses 
• Safety Critical Element management
• Pre-startup Safety Reviews
• Monitoring process safety metrics and analyzing data to identify trends and outliers and to make recommendations as needed.
• Participate in Pre-Start-Up / Readiness Reviews for major equipment commissioning activities.
• Participate in Go-no-Go reviews.
• Ability to interface with Contractor CSU team, engineering, and operations departments.
• Ability to influence the culture of process safety.

Basic Qualifications:

• Bachelor’s degree in Chemical/Process or Mechanical Engineering. Based on experience, other Engineering disciplines will be considered.
• 7-10 years of experience with preference in LNG or oil and gas. Other industry experience will be considered.
• Experience in design, implementation and management of safety systems and processes.
• Strong understanding of safety regulations and best industry practices/codes with demonstrated application.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Key Characteristics:

• Forward thinking with the ability to identify improvement opportunities, proactively engaging all sites.
• Asks targeted questions to ensure that the right solutions are discussed and implemented.
• Result oriented.
• Clear communicator – ability to provide clear guidance and expectations.
• Ability to communicate the process safety message in a respectful manner, taking into consideration ideas from others.
• Ability to mentor and coach junior engineers.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary

We are seeking a Structural Engineer for detail engineering of fast paced modularised LNG project, with 5 – 7 years experience.

This position will be located on our downtown Houston office. This is a Monday-Friday role.

Job Knowledge

• Experience in Structural design of an assigned scope of work for an LNG onshore project. 
• Work involves independent design or directing technical work of vendors/contractors, applying standard design details per ACI, AISC, PIP, OSHA and or client safety standards, applicable codes and industry standards which form the basis of design. 
• Will assist or review the cost estimates and quantity take-offs for on-going projects, proposals, forecasts, and change-orders.
• Shall provide technical guidance to contractors/vendors.

Responsibilities

•  Review the work of engineers and designers developing engineering and design documents for Piling & Foundation and Module & Stick Built Steel Pipe Racks/Structures as needed for the project.
•  Reviewing, monitoring and ensuring compliance requirements are met for the design (e.g. Standards, specification and local codes and regulations etc.)
•  Regularly performs reviews of vendor documents to ensure specifications and data sheet requirements are met.
•  Develops and leads others in ways of improving the design and lowering cost.
•  Considers multiple solutions and makes good decisions based on good data analysis.
•  Manages several different assignments simultaneously.

Qualifications

• Bachelor’s degree in Civil/Structural Engineering minimum required.
• 5-7 years' minimum relevant experience in refining and petrochemical industry, LNG Project preferably with EPC experience.
• Licensed Professional Engineer with NCEES records preferred
• Travel < 25% expected.
• Self directs work with limited supervision.
• Provides guidance, leadership and training to less experienced engineers.
• Work with project team as representative and coordinates work within discipline department.
• Adjusts to varying demands of work and manage changes.
• Skill in oral and written communication
• Works collaboratively across departments and involves others in solving problems. Initiates meetings within own team, other disciplines or internal customers for clarity on work.
• Serves as technical resource and point of contact for external or internal customers.
• Should have experience in managing and responding to the RFIs from owner’s construction team, vendors,  EPC contractors.

Software Knowledge:

• STAAD Pro, Risa, STAAD Foundation, Mat 3D Foundation.3D MathCAD
• Navisworks, Microstation, AutoCAD

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Senior Engineer, Piping. The Senior Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards. This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Supervise, mentor and provide guidance to junior designers and drafters.
• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in mechanical engineering (preferred).
• 10+ years of experience in piping layout, design and or engineering in the petrochemical industry, with at least 3 years in a leadership role.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• • Familiarity with construction and installation practices.
  • Understanding of project management principles.
  • Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Engineer, Piping. The Lead Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards.

This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in-office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in Mechanical Engineering, or equivalent (preferred).
• Minimum 10-15 years of piping design experience using 2D/3D software. Good knowledge of Piping design of LNG projects.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• Familiarity with construction and installation practices.
• Understanding of project management principles.
• Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking Principal Engineer, Mechanical to join our team in Houston. This position is a Monday - Friday in-office. 

Responsibilities:

• Lead engineering design, scope refinement, cost estimating, development of project design specifications, and support construction
• Oversee project activities of third party project managers, engineers, construction managers, inspectors, and contractors
• Influence decisions that improve reliability and operability, reduce operating costs, and create a sustainable competitive advantage
• Translate project plans into coherent, credible, realistic project schedules
• Specifying equipment and major materials for procurement
• Providing in the field construction assistance
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Single point accountability for the technical execution and related aspects to achieve project objectives and business intent
• Ensure overall project technical quality and conformance to plan (scope, budget & schedule).
• Support Change Management functions, Value Improvement Practices, Bid Evaluations, Process and Implementation studies

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Cryogenic Processes
• Minimum of five years multi-discipline engineering management experience
• Experience in LNG liquefaction facilities highly preferred
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Broad knowledge of Codes, Standards, and Industry Best Practices
• Exhibit excellent written and oral communication skills
• Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Senior Electrical Designer. The Senior Electrical Designer will play a key role in the development of detailed design of electrical packages, contributing to the success and development of Venture Global Electrical Engineering Standards.  Reporting directly to the Electrical Engineering Manager, you will work collaboratively with a team of engineers and designers to produce detailed designs and deliverables for the High Voltage (HV) system, Medium Voltage (MV) system, Low Voltage (LV) system, and Protection Systems.

Responsibilities:

• Act as the drafting and design interface for the discipline for projects and proposals
• Ensure quality of drafting, design and back drafting by carrying out quality checks as per the quality procedures and maintain quality records thereof.
• Monitor and report drafting and design progress for projects to the Engineering Manager.
• Induct drafting and design personnel to the drafting procedures in the office and ensure adherence to the same.
• Liaise with other disciplines on technical issues.
• The ability to work independently to complete demanding assignments through the application of advanced design theories, techniques, and practices on several small and medium size projects.
• The ability to work within a team environment with a minimum of supervision.
• Performs moderately to difficult drafting assignments requiring a working knowledge of established drafting techniques, standards, practices and software. Understands and applies company procedures as they pertain to the electrical discipline.
• The proven ability to oversee the preparation of design and detail drawings from sketches, plans or other design / specification data.
• Ability to take on responsibility for the design and drafting of HV, MV and LV electrical installations.
• Direct the work of junior designers and ensure the drawings are in accordance with the client requirements and relevant project specifications.
• Have the experience to participate in design review with various clients and to advise on technical design and drafting issues and compliance requirements as appropriate.
• Be able to demonstrate a proven track record of completing a given work scope within time and project constraints.
• Develop layouts, plans, sections, elevations, and details for facilities, equipment, etc. from reference drawings or catalogs.
• Performs dimensional and routine calculations required for the preparation of drawings.  Records and files electrical discipline documents.
• Ability to travel to job sites to perform site walkdown on raceway routing, etc.
• Responsible for the coordination of all electrical drawings.
• Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the project, etc.

Technical / Industry Experience and Qualifications Requirement:

• 10 or more years of experience as an Electrical Design Lead in Oil and Gas Industry;
• Experience in:
• Engineering Workshare;
• 3D Modelling packages such as AutoPlant / PDMS / PDS;
• CAD;
• AutoCAD;
• Microstation
• SmartPlant 3D;
• SmartPlant Electrical (SPEL);
• Specialization in the following: detailed drawings for lighting; small power and earthing systems; HV/MV/LV single line diagrams; wiring and control schematic diagram; AC/DC distribution panels, process area electrical equipment layouts, substation and switchyard layouts, cable tray, above grade and underground cable layouts, ductbank sizing and layouts, preparation of installation details, grounding plans, lightning layouts.
• Cable schedules, cable pulling calculations, cable tray sizing calculations, cable selection & sizing calculations.
• Lighting calculations (using software AGI32, etc.)
• Material take-offs, selection of bulk materials.
• Heat Tracing system layouts.
• Able to commute to Downton Houston office Monday – Friday

Education – Qualifications, Accreditation, Training:

• A Degree or Diploma in Electrical Design / Drafting with discipline specific training.
• An equivalent combination of education, training, and experience in electrical design and drafting.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Safety - Senior Engineer to join our team in Houston, TX with travel to site as required by Supervisor.  This role reports to the Manager, Process Safety and will be responsible for ensuring that operations are conducted safely, efficiently, and effectively.

Key Responsibilities/Accountabilities:

• Provide technical and engineering leadership on all process safety management elements such as MOC, PSSR, PHA, building siting, process design.
• Provide process safety and engineering guidance to communicate and evaluate process safety risks.
• Ability to recommend and implement process safety improvement opportunities by staying abreast of industry trends and technology.
• Day to day guidance of Process Safety Barrier Health reporting.
• Responsible for management/leadership on PHA/LOPA teams, including review and approval of associated action items.
• Responsible for leadership in process safety event (PSE) investigations.
• Assist in developing and delivering training programs, keeping them updated in accordance with changes in technology and industry best practices.
• Responsible for providing technical assurance on overall operational risk. These processes include:
• Car sealing
• Procedures – initial start-up and SOP and red line revisions
• Process Safety Event Reporting
• 5-why or root cause analysis (RCA)
• Permit to Work
• SIMOPs
• Inhibits / Bypasses 
• Safety Critical Element management
• Pre-startup Safety Reviews
• Monitoring process safety metrics and analyzing data to identify trends and outliers and to make recommendations as needed.
• Participate in Pre-Start-Up / Readiness Reviews for major equipment commissioning activities.
• Participate in Go-no-Go reviews.
• Ability to interface with Contractor CSU team, engineering, and operations departments.
• Ability to influence the culture of process safety.

Basic Qualifications:

• Bachelor’s degree in Chemical/Process or Mechanical Engineering. Based on experience, other Engineering disciplines will be considered.
• 7-15 years of experience with preference in LNG or oil and gas. Other industry experience will be considered.
• Experience in design, implementation and management of safety systems and processes.
• Strong understanding of safety regulations and best industry practices/codes with demonstrated application.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Key Characteristics:

• Forward thinking with the ability to identify improvement opportunities, proactively engaging all sites.
• Asks targeted questions to ensure that the right solutions are discussed and implemented.
• Result oriented.
• Clear communicator – ability to provide clear guidance and expectations.
• Ability to communicate the process safety message in a respectful manner, taking into consideration ideas from others.
• Ability to mentor and coach junior engineers.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Associate Electrical Engineer to join our team in Houston, TX.  This position is located in Downtown Houston and is Monday-Friday in office.

This role will report to the Engineering Manager, Electrical Operations Engineering and will be responsible for supporting Operations, Maintenance and Engineering groups for matters regarding the Plant Electrical System. 

 The role will be part of a team responsible for ensuring that the Plant Electrical System operates as per design, in a safe and reliable manner with minimal downtime.  

  Responsibilities: 

• Candidate will develop knowledge and understanding of the complete Plant Electrical System, equipment and will be assigned tasks including but not limited to:
• Switchgears (138kV, 4.16kV, 480V)
• Motor Control Centers (MCC)
• Uninterruptable Power Supplies (UPS)
• Transformers
• Energy Management Systems (EMS/SCADA)
• Electrical System Studies
• Support the development and maintenance of:
• Company Procedures & Processes 
• Key Performance Indicators & Metrics for Electrical
• Electrical drawings and databases
• Support with the Management of Change (MOC) process
• Support Root Cause Failure Analysis (RCFA) process
• Support Process Hazard Analysis (PHA) risk assessments
• Provide day to day troubleshooting support to Operations & Maintenance Groups 

 Education, Qualifications & Experiences: 

• Bachelor’s degree in Electrical Engineering, preferably with specialization in Power Systems.
• Familiarity with Microsoft Office 365 Application Suite
• Familiarity with Power Systems Modelling Tools such as ETAP/SKM preferable 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced and dynamic Lead Electrical Engineer to join our team in our Houston office. Reporting directly to the Electrical Engineering Manager, this role will be integral in developing detailed designs for electrical packages and contributing to the advancement of Venture Global’s Electrical Engineering Standards. The successful candidate will lead the electrical engineering discipline across various projects, ensuring the highest standards in quality, safety, and operational reliability.

Key Responsibilities:

• Lead electrical engineering projects and coordinate with multidisciplinary teams.
• Oversee the engineering and design team, ensuring deliverables meet quality, cost, and schedule requirements.
• Manage and forecast man-hour estimates, schedules, and total installed cost estimates based on project scope.
• Support the Technical Integrity function for electrical systems.
• Develop and implement HV, MV, and LV electrical systems and Protection Systems.
• Ensure compliance with industry codes, client requirements, and safety regulations.
• Drive innovation in modular, mid-scale plant designs to enhance efficiency.
• Provide technical guidance and mentorship to junior and senior engineers.
• Conduct power system studies and analysis, ensuring optimal system performance.
• Participate in front-end engineering, detailed engineering, request for proposal, and estimation activities.
• Review and approve designs, specifications, and contract documentation.
• Engage in procurement, construction, and commissioning activities.
• Conduct quality assurance reviews and verification of engineering deliverables.
• Lead troubleshooting efforts and provide solutions for electrical system challenges.
• Stay updated with the latest technological advancements in electrical engineering.

Qualifications & Experience:

Education & Certifications:

• Bachelor’s degree in Electrical Engineering , preferably with a focus on Power Systems.
• Professional Engineer (PE) License preferred.
• 15+ years of experience in electrical engineering, preferably in large-scale EPC projects.
• Oil & Gas industry experience is required, with a preference for LNG applications. Experience in petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing may be considered.

Technical Skills:

• Proven leadership in managing engineering teams and projects.
• Strong knowledge of HV substations, Ehouse, Switchgear and MCC design.
• Experience with:
• HV, MV, and LV systems
• Protection & Control Systems
• Single-line diagrams, schematics, and wiring diagrams
• Grounding, lighting, and cable routing designs
• Substation design and area classification per code requirements
• Power system studies and electrical calculations
• Fire alarm and HVAC control systems
• Familiarity with US LNG codes, standards, and regulations.
• Proficiency in ETAP power system software (preferred).
• Basic knowledge of SmartPlant Electrical and CAD software.
• Strong analytical, organizational, and problem-solving skills.
• Excellent communication and teamwork abilities.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary

We are seeking a Structural Senior Engineer for detail engineering of fast paced modularised LNG project, with 7 – 10 years experience.

This position will be located on our downtown Houston office. This is a Monday-Friday role.

Job Knowledge

• Experience in Structural design of an assigned scope of work for an LNG onshore project. 
• Work involves independent design or directing technical work of vendors/contractors, applying standard design details per ACI, AISC, PIP, OSHA and or client safety standards, applicable codes and industry standards which form the basis of design. 
• Will assist or review the cost estimates and quantity take-offs for on-going projects, proposals, forecasts, and change-orders.
• Shall provide technical guidance to contractors/vendors.

Responsibilities

•  Review the work of engineers and designers developing engineering and design documents for Piling & Foundation and Module & Stick Built Steel Pipe Racks/Structures as needed for the project.
•  Reviewing, monitoring and ensuring compliance requirements are met for the design (e.g. Standards, specification and local codes and regulations etc.)
•  Regularly performs reviews of vendor documents to ensure specifications and data sheet requirements are met.
•  Develops and leads others in ways of improving the design and lowering cost.
•  Considers multiple solutions and makes good decisions based on good data analysis.
•  Manages several different assignments simultaneously.

Qualifications

• Bachelor’s degree in Civil/Structural Engineering minimum required.
• 10-18 years' minimum relevant experience in refining and petrochemical industry, LNG Project, preferably with EPC experience and 7 ~ 10 years in lead position.
• Licensed Professional Engineer with NCEES records preferred
• Travel < 25% expected.
• Self directs work with limited supervision.
• Provides guidance, leadership and training to less experienced engineers.
• Work with project team as representative and coordinates work within discipline department.
• Adjusts to varying demands of work and manage changes.
• Skill in oral and written communication
• Works collaboratively across departments and involves others in solving problems. Initiates meetings within own team, other disciplines or internal customers for clarity on work.
• Serves as technical resource and point of contact for external or internal customers.
• Should have experience in managing and responding to the RFIs from owner’s construction team, vendors,  EPC contractors.

Software Knowledge:

• STAAD Pro, Risa, STAAD Foundation, Mat 3D Foundation.3D MathCAD
• Navisworks, Microstation, AutoCAD

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking an Instrument and Control System Senior Designer to join our project team in Houston, TX. 

This position will report to the Principal Engineer, Instrument and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime.  

Responsibilities: 

• I&C design/installation technical authority
• Ensure contractor adheres to project and international standards
• Provide design solution to upgrades and modifications on existing facilities
• Assist Commissioning and operation teams to troubleshoot and isolate control system issues
• Participate on Factory Acceptance Tests
• Review staffing and progress of assigned systems deliverables
• Review and approve bulk material substitutions (cables, cable glands, tubing, tubing fittings, etc.)
• Review and approve temporary modifications to I&C equipment
• Provides input to weekly site engineering report

Qualifications: 

• Bachelor’s degree in Electrical, Chemical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• Minimum 10 years’ experience working with instrumentation and control systems.
• Experience with:
• Plant Instrumented Control and Safety Systems Honeywell and Emerson CHARMS), Honeywell and Emerson CHARMS), Fire and Gas Systems, and 
• Operational Technology Networks, fiber optic, wiring design.
• IT Network installation for PAGA, Security, CCTV, LAN and Access Control
• Field Instrumentation installation for process measurement including cryogenic applications (e.g. Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, ProfiBus, etc.)
• Packaged equipment instrumentation and installation.
• Experience in LNG liquefaction facilities highly preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced and dynamic Senior Electrical Engineer to join our team in our Houston office. Reporting directly to the Electrical Engineering Manager, this role will be integral in developing detailed designs for electrical packages and contributing to the advancement of Venture Global’s Electrical Engineering Standards. The successful candidate will lead the electrical engineering discipline across various projects, ensuring the highest standards in quality, safety, and operational reliability.

Key Responsibilities:

• Lead electrical engineering projects and coordinate with multidisciplinary teams.
• Oversee the engineering and design team, ensuring deliverables meet quality, cost, and schedule requirements.
• Manage and forecast man-hour estimates, schedules, and total installed cost estimates based on project scope.
• Support the Technical Integrity function for electrical systems.
• Develop and implement HV, MV, and LV electrical systems and Protection Systems.
• Ensure compliance with industry codes, client requirements, and safety regulations.
• Drive innovation in modular, mid-scale plant designs to enhance efficiency.
• Provide technical guidance and mentorship to junior and senior engineers.
• Conduct power system studies and analysis, ensuring optimal system performance.
• Participate in front-end engineering, detailed engineering, request for proposal, and estimation activities.
• Review and approve designs, specifications, and contract documentation.
• Engage in procurement, construction, and commissioning activities.
• Conduct quality assurance reviews and verification of engineering deliverables.
• Lead troubleshooting efforts and provide solutions for electrical system challenges.
• Stay updated with the latest technological advancements in electrical engineering.

Qualifications & Experience:

Education & Certifications:

• Bachelor’s degree in Electrical Engineering, preferably with a focus on Power Systems.
• Professional Engineer (PE) License preferred.

Experience:

• 15+ years of experience in electrical engineering, preferably in large-scale EPC projects.
• Oil & Gas industry experience is required, with a preference for LNG applications. Experience in petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing may be considered.

Technical Skills:

• Proven leadership in managing engineering teams and projects.
• Strong knowledge of HV substations, Ehouse, Switchgear and MCC design.
• Experience with:
• HV, MV, and LV systems
• Protection & Control Systems
• Single-line diagrams, schematics, and wiring diagrams
• Grounding, lighting, and cable routing designs
• Substation design and area classification per code requirements
• Power system studies and electrical calculations
• Fire alarm and HVAC control systems
• Familiarity with US LNG codes, standards, and regulations.
• Proficiency in ETAP power system software (preferred).
• Basic knowledge of SmartPlant Electrical and CAD software.
• Strong analytical, organizational, and problem-solving skills.
• Excellent communication and teamwork abilities.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite