HERE'S WHAT YOU'LL DO

• Under supervision of a professional engineer may perform uncomplicated designs of ductwork, piping, controls and equipment selection for HVAC systems for building design. As necessary assist with Plumbing and Fire Protection Designs.
• Prepare Building Load Calculations using modeling software under supervisory direction.
• May prepare Energy Models using appropriate software correct parameters with supervisory oversight.
• Assist in Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases with supervisory oversight. As necessary perform Revit/BIM modeling for plumbing and fire protection systems.
• May assist/coordinate with specifications as a member of the design team.
• May write draft reports to be reviewed by a senior engineer.
• Review submittals and shop drawings for compliance with the contract documents.
• May perform job site visits to verify existing conditions and observe construction progress. Site visits frequently require a physical walk-through of site.
• Perform other duties as assigned.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a licensed Engineer and designated project leadership. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

HERE'S WHAT YOU'LL NEED

• Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
• Minimum of 6+ years of related experience required.
• Current CPD, PE or FPE in the United States preferred.    
• LEED accreditation preferred.
• Must possess a working knowledge and experience, while still acquiring higher level knowledge.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

• Perform and direct design of ductwork, piping and equipment selection for HVAC systems independently on assigned projects. Complex projects could be under the supervision of a professional engineer. As necessary assist with Plumbing and Fire Protection Designs.
• May supervise or provide project management direction within the mechanical discipline to include the monitoring of project progresses and project budget.
• Calculate heating, cooling loads, layout, design ductwork, and piping using energy modeling software.
• Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems.
• Edit specifications relating to existing or new projects.
• Independently research as need arises and respond to emergent issues.
• Specify mechanical equipment such as boilers, chillers, and air handling units.
• Review shop drawings for compliance of specifications and contract documents.
• Interface effectively with clients and members of the project team, attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget.
• Respond to RFI’s and review of change orders in the preparation of construction documents.
• Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site.
• Coordinates work activities on specific projects with several persons with various levels of capability; participates in business development and marketing activities.
• Perform other duties as assigned.

 

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of designated project leadership. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

 

The salary range for this position is $98,124 to $122,706. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at  https://www.cannondesign.com/careers/benefits. Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level.

 

 

 

As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

 

CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm’s policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign’s policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will perform as a high-level specialist in a lead role for the mechanical engineering team.  Projects may include new construction and renovation in educational, healthcare, sports, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

• Perform and direct complex design of ductwork, piping and equipment selection for HVAC systems for large scale size buildings. Able to work independently in all Mechanical disciplines with no oversight or guidance. As necessary assist with Plumbing and Fire Protection Designs.
• Interface effectively with clients and members of the design team.
• Serve in the QAQC process and an independent reviewer.
• Oversee, guide, mentor and provide technical leadership to designers and engineering team.
• Direct the work of less experienced staff including the development and presentation of annual performance reviews.
• Oversee the use of engineering complexities related to the use Energy Model software.
• Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems.
• Review and accept selective shop drawings for compliance of specifications and contract documents.
• Interface effectively with clients and members of the project team and attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget.
• Participate or lead value engineering sessions with Architectural/Engineering team.
• Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts.
• Conduct staff development activities including work planning, budget development, scheduling in conjunction with the Project Manager.
• Respond to RFI’s and review of change orders in the preparation of construction documents.
• Conduct job site visits to verify existing conditions and observe construction progress.  Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site.
• Represents company in project activities; directs activities of project team members; represents company in business development and marketing activities. May serve on internal and/or professional committees.
• Perform other duties as assigned.

HERE'S WHAT YOU'LL NEED

• Minimum of 10 years of related experience required.
• Current PE in the United States required.
• LEED accreditation preferred.
• Strong knowledge of Life Safety Codes
• Advanced knowledge of mechanical engineering.
• Ability to serve in QAQC process and as an independent reviewer.
• Must be a critical thinker.
• Must be highly analytical.
• Excellent verbal and written communication skills.
• Strong ability to interface effectively with clients and members of the design team.
• Able to effectively handle multiple projects.
• Must be a fully qualified professional able to perform work with a high degree of latitude, with some ambiguity in work.    
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

The salary range for this position is $117,708 to $147,084. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at  https://www.cannondesign.com/careers/benefits. Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level.

 

 

 

As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

 

CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm’s policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign’s policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of designated project leadership. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

• Perform and direct complex design of ductwork, piping and equipment selection for plumbing and fire protection systems for large scale size buildings. Able to work independently in all Mechanical disciplines with no oversight or guidance. As necessary assist with HVAC Designs.
• Oversee, guide, mentor and provide technical leadership to designers and engineering team.
• Direct the work of less experienced staff including the development and presentation of annual performance reviews.
• May serve in the QAQC process and an independent reviewer.
• Interface effectively with clients and members of the design team.
• Oversee the use of engineering complexities related to the use Energy Model software.
• Prepare Revit/BIM modeling of construction drawings of plumbing and fire protection systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling HVAC systems.
• Specify equipment such as water heaters, plumbing fixtures, water softeners and pumping equipment.
• Review and accept selective shop drawings for compliance of specifications and contract documents.
• Interface effectively with clients and members of the project team and attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget.
• Participate or lead value engineering sessions with Architectural/Engineering team.
• Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts.
• Conduct staff development activities including work planning, budget development, scheduling in conjunction with the Project Manager.
• Respond to RFI’s and review of change orders in the preparation of construction documents.
• Conduct job site visits to verify existing conditions and observe construction progress.  Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site.
• Represents company in project activities; directs activities of project team members; represents company in business development and marketing activities. May serve on internal and/or professional committees.
• Perform other duties as assigned.

HERE'S WHAT YOU'LL NEED

• Minimum of 8+ years of related experience required.
• Current PE or FPE in the United States required.
• LEED accreditation preferred.
• Strong knowledge of Life Safety Codes
• Must be a critical thinker.
• Must be highly analytical.
• Must be able to work independently with no oversight or guidance.
• Must be a fully qualified professional able to perform work with a high degree of latitude.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Must have the ability to engage effectively with clients.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. 

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a Certified Plumbing Designer or licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

• Perform and direct complex design of ductwork, piping and equipment selection for plumbing and fire protection systems for large scale size buildings. Able to work independently in all Mechanical disciplines with no oversight or guidance. As necessary assist with HVAC Designs.
• Oversee, guide, mentor and provide technical leadership to designers and engineering team.
• Direct the work of less experienced staff including the development and presentation of annual performance reviews.
• May serve in the QAQC process and an independent reviewer.
• Interface effectively with clients and members of the design team.
• Oversee the use of engineering complexities related to the use Energy Model software.
• Prepare Revit/BIM modeling of construction drawings of plumbing and fire protection systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling HVAC systems.
• Specify equipment such as water heaters, plumbing fixtures, water softeners and pumping equipment.
• Review and accept selective shop drawings for compliance of specifications and contract documents.
• Interface effectively with clients and members of the project team and attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget.
• Participate or lead value engineering sessions with Architectural/Engineering team.
• Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts.
• Conduct staff development activities including work planning, budget development, scheduling in conjunction with the Project Manager.
• Respond to RFI’s and review of change orders in the preparation of construction documents.
• Conduct job site visits to verify existing conditions and observe construction progress.  Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site.
• Represents company in project activities; directs activities of project team members; represents company in business development and marketing activities. May serve on internal and/or professional committees.
• Perform other duties as assigned.

HERE'S WHAT YOU'LL NEED

• Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
• Minimum of 8+ years of related experience required.
• Current CPD, PE or FPE in the United States preferred.    
• LEED accreditation preferred.
• Strong knowledge of Life Safety Codes
• Must be a critical thinker.
• Must be highly analytical.
• Must be able to work independently with no oversight or guidance.
• Must be a fully qualified professional able to perform work with a high degree of latitude.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Must have the ability to engage effectively with clients.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a Certified Plumbing Designer or licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

HERE'S WHAT YOU'LL NEED

• Associate degree in a relevant field required.
• Minimum of 6+ years of related experience required.
• Current CPD, PE or FPE in the United States preferred.
• LEED accreditation preferred.
• Must possess a working knowledge and experience, while still acquiring higher level knowledge.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. 

 

This role is remote within the U.S., with a preference for candidates located in or near: Arlington, VA; Baltimore, MD; Boston, MA; Buffalo, NY; Chicago, IL; Dallas, TX; Denver, CO; Minneapolis, MN; Pittsburgh, PA, or St. Louis, MO. 

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of designated project leadership. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

HERE'S WHAT YOU'LL NEED

• Minimum of 6+ years of related experience required.
• Current PE or FPE in the United States required.
• LEED accreditation preferred.
• Must possess a working knowledge and experience, while still acquiring higher level knowledge.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. 

 

ABOUT THE ROLE

You will be an integral part of our multi-disciplinary team, collaborating closely with owners, project managers, engineers, and contractors to Successfully deliver high-quality building systems commissioning, from planning through turnover, with an emphasis on mechanical and HVAC systems, controls, and operational readiness. This role includes hands-on field work (site walks, start-up support, functional performance testing) as well as strong documentation and client-facing communication.

Under the guidance of senior commissioning professionals, you will contribute to projects that span new construction and renovation across sectors such as education, healthcare, commercial, and science and technology. This role involves hands-on involvement in system testing, troubleshooting, and documentation to deliver operational readiness and compliance with quality and safety standards, and reports to the Lead Commissioning Engineer

Click here to learn more about our Engineering practice

HERE'S WHAT YOU'LL DO

With appropriate supervision, you will plan and execute commissioning activities for assigned projects, including:

• Review and interpret drawings, specifications, sequences of operation, equipment submittals, and technical reports; provide clear commissioning comments and field observations.
• Support development and implementation of the commissioning plan, schedule, and project-specific documentation (checklists, test forms, meeting notes, and reports).
• Develop and/or execute functional performance tests for HVAC and mechanical systems (e.g., AHUs, RTUs, VAV/VRF, hydronic distribution, chilled/hot water plants, exhaust systems, and smoke control interfaces—as applicable).
• Coordinate commissioning activities with project managers, design teams, contractors, TAB agencies, and controls vendors to enable efficient testing and issue resolution.
• Witness and/or support system start-up, controls point-to-point verification, TAB verification, and integrated testing; document results and follow up on corrective actions.
• Maintain an accurate issues log; track deficiencies to closure; verify corrective actions and support re-testing as needed.
• Manage and maintain commissioning documentation and deliverables, including meeting notes, test records, training verification, and final commissioning reports.
• Participate in project meetings and provide status updates on commissioning progress, schedule risks, and key open issues.
• Perform job site visits to verify existing conditions, observe construction progress, and confirm installed work supports successful start-up and testing; site visits frequently require physical walk-throughs of active construction areas, mechanical rooms, rooftops, and similar environments.
• Perform other duties as assigned.

HERE'S WHAT YOU'LL NEED

• A minimum of 4 years of experience in commissioning, HVAC system design, or building automation design, or closely related field work.
• Bachelors or master’s in engineering required, Bachelor or master’s in engineering from an ABET program preferred.
• Working knowledge of HVAC systems and terminology, including a basic understanding of controls/BAS sequences and how systems operate in the field.
• Ability to read and interpret construction documents (plans, specs, control sequences) and translate them into test procedures and clear field documentation.
• Excellent verbal and written communication skills; strong teamwork and organizational skills; ability to effectively handle multiple projects, priorities, and deadlines with attention to detail.
• Commitment to safety and quality; ability to follow site safety requirements and work effectively in active construction environments.
• Ability to travel to project sites and perform field work that includes walking sites, climbing ladders/stairs, and accessing rooftops/mechanical spaces, as required.
• 50% travel is expected.

PREFERRED QUALIFICATIONS

• EIT/FE (or active pursuit) is a plus. Otherwise, must possess the ability and desire to obtain an approved commissioning-related certification.
• Experience supporting functional testing, troubleshooting, and issue resolution on complex facilities (e.g., healthcare, laboratories, central utility plants).
• Exposure to commissioning best practices and workflows (issues log management, building systems verification, TAB coordination, integrated systems testing).
• Experience with controls testing and data trending (DDC/BAS), including reading sequences of operation and verifying points, alarms, and trends.
• Proficiency with Microsoft Office (Word, Excel, Outlook) and common documentation platforms; familiarity with commissioning software platforms is a plus.

WORK ENVIRONMENT & PHYSICAL REQUIREMENTS

This position includes a mix of office-based work and on-site field work. Site visits may include exposure to active construction conditions (noise, dust, temperature variations) and mechanical spaces.

 

 

 

As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

 

CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm’s policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign’s policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.

 

ABOUT THE ROLE

You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 

 

HERE'S WHAT YOU'LL DO

• Perform and direct design of ductwork, piping and equipment selection for HVAC systems independently on assigned projects. Complex projects could be under the supervision of a professional engineer. As necessary assist with Plumbing and Fire Protection Designs.
• May supervise or provide project management direction within the mechanical discipline to include the monitoring of project progresses and project budget.
• Calculate heating, cooling loads, layout, design ductwork, and piping using energy modeling software.
• Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems.
• Edit specifications relating to existing or new projects.
• Independently research as need arises and respond to emergent issues.
• Specify mechanical equipment such as boilers, chillers, and air handling units.
• Review shop drawings for compliance of specifications and contract documents.
• Interface effectively with clients and members of the project team, attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget.
• Respond to RFI’s and review of change orders in the preparation of construction documents.
• Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site.
• Coordinates work activities on specific projects with several persons with various levels of capability; participates in business development and marketing activities.
• Perform other duties as assigned.

• Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
• Minimum of 4 years of related experience required.
• EIT/FE in the United States preferred.
• LEED accreditation preferred.
• Excellent verbal and written communication skills.
• Able to effectively handle multiple projects.
• Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.