What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead the design and engineering of air suspension components including air springs, compressors, valves, height sensors, lines, reservoirs, and electronic control hardware. 
• Ensure implementation of specifications, DFMEAs, and performance targets. 
• Review/Release 3D models, drawings, and engineering documents. 
• Review internal/external development plans, and review test data. 
• Analyze test results, identify root causes, and drive design improvements. 
• Support vehicle-level tuning and calibration engineers in the development of desired ride, comfort, and handling. 
• Work with controls engineers to develop and refine air suspension control strategies (leveling, damping, load management, compressor duty cycle management). 
• Validate system behavior using HIL/SIL tools, CAN logs, and vehicle tests with integration engineers. 
• Support program timing, cost targets, supplier deliverables, and APQP processes. 
• Lead technical discussions with suppliers and internal manufacturing teams. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan or Charlotte, NC. 
• This role requires daily attendance in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s or master’s degree in Engineering 
• 4+ years of experience in concept engineering or serial development, specifically with focus on air suspension systems. 
• Experience in CAD tools, packaging of chassis components and experience in part design (incl. requirements management, system integration, manufacturing and assembly processes). 
• Advanced project steering and coordination skills to practice independent project management for a defined chassis part scope. 
• Motivated engineer, wanting to work at the cutting edge of vehicle technical design, create new ideas and solutions, enjoying hands-on testing. 
• Strong interpersonal skills including ownership, self-motivated, problem solving, analytical, team player, innovative, creative, communication skills and ability to develop & mutually thrive in working relationships. 
• Proven ability to work in a cross-functional environment. 
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $110,000.00 - $135,000.00

Internal leveling code: IC9

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

Be responsible for the electrical hardware design and release of electrical switches and switch modules. Your scope can cover from clean sheet of paper through virtual development, testing/sign-off and manufacturing launch for Scout rugged SUV’s and pick-ups.

• Work with Studio, Concept, Purchasing and Finance counterparts to develop technical specifications in support of the quoting and sourcing process.
• Manage supplier resources efficiently to deliver components and systems that meet cost, timing, and quality targets.
• Work with suppliers to develop robust electrical design verification and validation plans, perform virtual and physical testing, and ensure issues are resolved prior to program validation signoff milestones.
• Define electrical interfaces for switch modules that conform with vehicle EE architecture, power distribution, grounding, diagnostics, and network communication requirements.
• Collaborate with software and systems teams on switch logic, diagnostics, and fault handling.
• Ensure designs conform to safety standards and U.S. government regulations.
• Proactively stay attuned to consumer experience and propose system improvements accordingly.
• Be part of a diverse team fostering a collaborative and high-performance culture, promoting continuous learning and professional development among team members.

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s or master’s degree in electrical engineering, or combined electrical/mechanical engineering, systems engineering, or a relevant field.
• 5 to 10 years of experience in electromechanical component areas with a focus on switch design, and relevant automotive assignments covering all phases of product development (design, test, and launch).
• Strong technical skills and expertise in human-machine interfaces design, switches and related electromechanical components and systems, employing a six-sigma approach to engineering design and problem-solving.
• Familiarity with computer-aided engineering (CAE) or direct experience in this field.
• Knowledge of diagnostics, DTCs, and switch fault handling.
• Experience dealing with industrial design studio and CMF (color, material and finish) requirements.
• Ability to build strong working relationships with individuals at all organizational levels.
• Experience with light and color harmony.
• Experience with switch haptics and mechanical design.
• Supplier (not limited to tier 1) management and engagement experience to ensure design robustness and performance matrix compliance for on-time delivery from kick-off to post SOP.
• VW group experience is desirable

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $110,000.00 - $135,000.00

Internal Leveling Code: IC9

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for the ladderframe structure all new products. You will cover from clean sheet of paper through virtual development, testing/sign-off and manufacturing launch for all Scout all-electric pick-up and rugged SUVs. 
• Creating the CAD-Data of the ladderframe structure 
• Optimize the CAD-Data with respect to cost, functionality, weight, and manufacturability. 
• Working together with suppliers and engineering service providers. 
• Be a part of a diverse team while fostering a collaborative and high-performance culture. 
• Develop CAD data for virtual and physical verification testing, including field testing. 
• Ensure designs conform to safety standards and U.S. government regulations. 
• Proactively stay attuned to consumer experience and propose system improvements accordingly. 
• Manage resources efficiently including infrastructure, financial, supplier partners and people. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan, or Charlotte, NC. 
• The responsibilities of this role require 4 days attendance in office with in-person meetings and events regularly. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring:

• Education/Certifications: Bachelor’s or Master’s degree in electrical engineering, mechanical engineering, systems engineering, engineering management or a relevant field 
• Years of Experience required in type of role: 4+ years of experience in body mechanical areas and ladderframe structure 
• Communication: Strong written and verbal communication skills 
• Expert in CATIA V5. Including the ability to make 3D parametric models and 2D drawings 
• Strong technical skills and expertise to problem-solving 
• Ability to lead simultaneous engineering teams 
• Good knowledge of MS Office products 
• Familiarity with computer-aided engineering (CAE) or direct experience in this field. 
• The ability to build strong working relationships with individuals at all organizational levels. 

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range =   $110,000.00 - $135,000.00

Internal leveling code: IC9

Overview

As an Engineer, Side Door Window Mechanisms & Glass, you will be involved in the “cradle to grave” approach to design & development. Expected to create concept design for novel solutions to current and new opportunities. Lead analysis of concept and final product, testing and launch, commercial and timing activities, and work with studio, manufacturing team and purchasing.

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead conceptual studies to solve unique problems in unique ways.
• Generate solution: concepts in ‘napkin sketch’ - fully analyzed physical prototypes - released and launched parts.
• Lead collaborative development of components and systems including interface with body engineering, manufacturing, studio design, quality, and customer experience teams.
• Perform kinematic and structural analysis to optimize designs.
• Responsible for component release for components and systems throughout program lifecycle, including concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototyping builds, validation testing, and production support.
• Work with the manufacturing team to develop the assembly process and find solutions to manufacturing issues.
• Manage cost and weight for components and systems from initial engineering estimates, through supplier quotes. Ensuring accurate forecasting and implementation plans throughout the development.
• Developing and managing your system, subsystem, and component part information.
• Be a champion of 1st principles design methodology in the body closures systems and across the entire vehicle.
• Engage in debate and represent the department as a stakeholder during design reviews.
• Mentor and help develop other less experienced engineers.
• Coordinate supplier meetings, track, investigate and resolve issues related to design.

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan, or Charlotte, NC.
• This role requires 4 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor of Science in an engineering discipline (master’s degree and significant experience is a plus)
• 5-10 + years’ experience in Body Closures development or equivalent industry experience.
• Strong written and verbal communication skills
• Understanding of product requirements and closures features to deliver world class customer experience in one or more of the following areas:
  • Window Regulators
  • Power motors and Electrical/Software Interfaces
  • Automotive Glass
  • Glass Sealing – Weatherstrip
  • Door Sheetmetal
  • Closures mechanisms
• Strong understanding of 1st principal physics of a closures system –loads, forces, and overall function of the system, and tradeoffs among design, package, function, and customer experience involved with these systems.
• Ability to self-direct, self-managing issues to closure involving all necessary teams, and adapt quickly to program changes.
• Strong desire to create unique methods for analysis using tools available.
• CAD design experience for closures systems or related vehicle components. Catia V5 and/or 3DX experience preferred but not required.
• Advanced use of tools for analyzing structural performance, motion forces, kinematic performance, manufacturing options with rapid iterations.
• Knowledge of an automotive design and development process, system requirements, and general engineering best practices.
• Ability to deliver under pressure and manage component design & development within cost, weight, and timing constraints.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $110,000.00 - $135,000.00

Internal leveling code: IC9

Position Overview

The Senior Thermal Systems Design Release Engineer (DRE) serves as the technical leader and end to end owner of advanced thermal management components and subsystems across multiple vehicle programs. This role is responsible for leading the design, development, validation, release, and lifecycle support of complex thermal hardware including cooling modules, HVAC systems, refrigerant circuits, battery thermal systems, pumps, valves, heat exchangers, and related fluid handling components.
The senior DRE ensures that all thermal subsystems meet or exceed OEM performance, durability, cost, quality, manufacturing, and timing targets from program initiation through Job 1 and into post launch operations. This role requires deep technical capability, cross functional leadership, supplier management expertise, and the ability to resolve complex system level issues.

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

Thermal System Leadership & Technical Ownership

• Serve as the senior engineering authority and “single point of responsibility” for assigned thermal systems within one or more vehicle platforms.
• Translate vehicle level thermal, energy, and performance targets into detailed component level technical requirements and specifications.
• Lead system integration efforts to ensure compatibility with vehicle controls, electrical architecture, software interfaces, and packaging constraints.
• Provide technical mentorship to junior DREs and influence cross functional engineering decisions related to thermal architecture.

Advanced OEM Design & Release Execution

• Direct the creation, evolution, and approval of CAD models, drawings, specifications, and documentation within the PLM environment.
• Own part numbering strategy, BOM structure, and engineering releases for all gateway milestones across multiple vehicle programs.
• Lead high level design reviews, trade off discussions, and technical forums with product development, controls, electrical, manufacturing, and program leadership.
• Drive early issue identification and resolution through advanced analytical tools and system modeling.

Supplier & Sourcing Leadership

• Serve as the chief technical interface to global suppliers, ensuring alignment on requirements, performance expectations, timing, and quality.
• Review, challenge, and approve supplier engineering documentation including DFMEA, DV plans, tolerance stacks, and material/process specifications.
• Partner with Purchasing to evaluate sourcing strategies, review commercial proposals, and assess supplier technical readiness.
• Lead supplier launch readiness activities including tooling kickoff, PPAP validation, and manufacturing capability audits.

Validation Strategy & Vehicle Build Support

• Develop, own, and execute comprehensive DVP&R plans for thermal components and subsystems.
• Provide on-site support for prototype, mule, VFF, and production builds, lead issue triage, root cause analysis, and corrective actions.
• Lead technical support for thermal testing campaigns including environmental chambers, weather events, dynamometer testing, and wind tunnel evaluations.
• Collaborate with Vehicle Integration and Controls teams to ensure system performance meets real world and regulatory requirements.

Quality, Manufacturing & Launch Excellence

• Coordinate closely with Manufacturing Engineering to ensure that component designs meet plant requirements and process capabilities.
• Lead and support PFMEA reviews, control plan development, and PPAP documentation for thermal systems.
• Drive resolution of launch issues including leaks, noise and vibration concerns, flow restrictions, contamination, and supplier non conformances.
• Implement lessons learned and design optimizations to ensure continuous improvement across vehicle programs.

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan.
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related discipline.
• 6+ years of experience in automotive thermal systems or closely related hardware.
• Deep understanding of heat transfer, fluid dynamics, coolant systems, refrigerant circuits, and thermal system integration.
• Expertise with OEM CAD and PLM systems and experience leading engineering releases through full vehicle development cycles.
• Demonstrated ability to lead complex design efforts and resolve system level issues in cross functional environments.

Preferred Qualifications

• Experience with EV thermal architectures, integrated cooling systems, and high voltage thermal components.
• Strong knowledge of APQP, PPAP, DFMEA, DVP&R, and quality systems.
• Familiarity with manufacturing processes for heat exchangers, pumps, valves, hoses, and molded plastic/metal components.
• Proven track record of leading supplier development, managing global supply chains, and supporting launch activities.
• Advanced problem-solving skills including structured root cause analysis, system simulations, and data driven decision making.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $120,000.00 - $145,000.00

Internal leveling code: IC8

Overview

As a Mechanism side &Front closure engineer, you will be involved in the “cradle to grave” approach to design & development.  Expected to create concept design for novel solutions to current and new opportunities. Lead analysis of concept and final product, testing & launch, commercial & timing activities, and work with studio, manufacturing team and purchasing. 

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead conceptual studies to solve unique problems in unique ways.
• Generate solution: concepts in ‘napkin sketch’ - fully analyzed physical prototypes - released and launched parts.
• Lead collaborative development of components and systems including interface with body engineering, manufacturing, studio design, quality, and customer experience teams.
• Perform kinematic and structural analysis to optimize designs.
• Responsible for component release for components and systems throughout program lifecycle, including concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototyping builds, validation testing, and production support. 
• Work with manufacturing team to develop assembly process and find solutions to manufacturing issues.
• Manage cost and weight for components and systems from initial engineering estimates, through supplier quotes. Ensuring accurate forecasting and implementation plans throughout the development. 
• Developing and managing your system, subsystem, and component part information. 
• Be a champion of 1^st principles design methodology in the body closures systems and across the entire vehicle. 
• Engage in debate and represent the department as a stakeholder during design reviews. 
• Mentor and help develop other less experienced engineers. 
• Coordinate supplier meetings, track, investigate and resolve issues related to design. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor of Science in an engineering discipline (Master’s degree and significant experience is a plus) and 5-10+ years’ experience in Body Closures development or equivalent industry experience. 
• Understanding of product requirements and closures features to deliver world class customer experience in one or more of the following areas:
• Handles
• Latches
• Dampers
• Load Reduction Assist Mechanisms 
• Window Regulators 
• Power Actuators 
• Charge Port Door Mechanisms
• Latching System – Front, Rear 

• Strong understanding of 1^st principal physics of a closures system –loads, forces, and overall function of the system, and tradeoffs among design, package, function, and customer experience involved with these systems. 
• Ability to self-direct, self-managing issues to closure involving all necessary teams, and adapt quickly to program changes. 
• Strong desire to create unique methods for analysis using tools available.
• CAD design experience for closures systems or related vehicle components. Catia V5 experience preferred but not required. 
• Advanced use of tools for analyzing structural performance, motion forces, kinematic performance, manufacturing options with rapid iterations.
• Knowledge of an automotive design and development process, system requirements, and general engineering best practices.
• Good interpersonal and communication skills with a high level of integrity.
• Ability to deliver under pressure and manage component design & development within cost, weight, and timing constraints. 
• Willingness to travel to suppliers, manufacturing, and testing facilities as required throughout product development. 
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $130,000.00 - $160,000.00

Internal leveling code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for system engineering for the front drive unit, front drive unit assembly and the front and rear drive unit NVH cover for the Scout Traveler SUV and Terra pickup. 
• Coordinate component designs, builds and testing to meet both Scout and supplier milestones. 
• Identify risks and escalate to leadership where appropriate to raise awareness and drive action. 
• Track and report drive unit imperatives including system cost, mass, and investment. 
• Effectively coordinate hardware, software and calibration for all phases from prototype development to production. 
• Provide technical feedback to concept architects, designers, test engineers and calibration teams. 
• Act as the drive unit single point contact for various partners and suppliers. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s degree in Engineering or Engineering Technology. (required) 
• Strong Powertrain technical fundamentals.  (required) 
• 7+ years of experience managing complex multi-disciplinary engineering projects, with evidence of success bringing programs to life from concept to production (required) 
• Experience with common project/ program management tools. (required) 
• Proven ability to work in a cross-functional environment with colleagues from purchasing, manufacturing, etc. (required) 
• Strong interpersonal skills including accountability, self-motivation, problem solving, analytical thinking, succinct communication and ability to develop & mutually thrive in working relationships. (required) 
• Experience with design release of Powertrain components and systems. (preferred) 

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $110,000.00 - $135,000.00

Internal Leveling Code: IC9

Job Description:

• As a Electronics Resident Engineer, you will provide critical on-site hardware and electronics support at General Motors Tech Centers and Assembly Plants, particularly during launch phases.
• You will act as the vital supporting link between the Client Team and the GM Team to help design, develop, and successfully launch products.
• In this role, you will apply hands-on electronics expertise to test, diagnose, and validate automotive embedded systems while delivering high-quality service and representing the company at the customer site.

Requirements / Hardware & Electronics Engineering Contributions:

• Schematics & Circuitry: Read, interpret, and analyze complex electrical schematics to understand electronics design basics and trace circuits for diagnostic purposes.
• Lab Equipment Utilization: Operate standard electronics laboratory equipment, heavily utilizing Oscilloscopes, Multimeters, and Logic Analyzers to capture waveforms, verify signal integrity, and take precise electrical measurements during issue replication.
• PCBA Testing & Programming: Utilize JTAG debuggers to interface directly with microcontrollers for testing, debugging, and programming Printed Circuit Board Assemblies (PCBAs) at the bench level.
• Hardware Prototyping & Rework: Apply practical, hands-on experience to solder and rework Surface Mount Technology (SMT) components on automotive circuit boards.
• Embedded System Validation: Execute system validation tasks by developing a clear understanding of system bench setups and translating vehicle test cases against hardware system requirements.
• In-Vehicle & Bench Troubleshooting: Troubleshoot hardware and communication issues directly on the customer's test bench and in-vehicle. This includes actively reflashing Automotive Embedded Electronic Control Units (ECUs) with updated software or calibration files as needed.
• Root Cause Analysis: Serve as an active participant in technical problem-solving utilizing methodologies like QRQC (Quick Response Quality Control) to identify hardware failures at the component or system level.

Resident Engineering & Project Support:

• Release assigned electronics parts into the General Motor using their specific ECM process.
• Order parts to support build events and ensure the timely closure of all hardware-related ECRs and work orders.
• Co-facilitate subsystem/component Product Development Team (PDT) meetings, speaking clearly with facts and data regarding hardware performance.
• Track and maintain the delivery matrix of Bench parts, Mule Build Parts, Software, and Calibration files.
• Support the vehicle build process and sign-off activities for all prototypes and manufacturing builds (Virtual, Mule, Structural, Integration, Pre-Production, and Production).

Education & Experience:

• Bachelor's Degree in Electronics, Electrical or Computer Science.
• Entry-level experience, with an automotive internship, system validation experience, or customer service experience strongly preferred.
• Previous experience working with an automotive company is a plus.

Hardware & Electronics Skillset:

• Embedded Systems: Hands-on experience or strong academic familiarity with automotive embedded ECUs and PCBA architecture.
• Automotive Networks: Solid understanding of vehicle network architectures, specifically CAN Bus Serial communications and Automotive Ethernet communication protocols.
• Hardware Tools: Proven ability to use JTAG debuggers, oscilloscopes, multimeters, and logic analyzers.
• General Tech Skills: Proficiency in the Microsoft Office suite (Word, Excel, PowerPoint). Programming knowledge in Google Scripts and VBA is considered a strong plus for data automation.

Key Competences:

• Customer-Centric: Focus on the customer, act as a self-starter, and represent the company technically with superior customer service.
• Continuous Learner: Eagerness to build deep system and product hardware knowledge while maintaining an agile behavior.
• Analytical: Strong problem-solving skills with the ability to convey complex hardware technical information effectively to both engineering and management teams.

Network Engineer (AMR / Industrial Wireless)

North Point Technology is hiring Network Engineers to support the deployment of Autonomous Mobile Robot (AMR) systems across a global manufacturing footprint. This role is ideal for an experienced network professional who can design, deploy, and optimize industrial wireless networks in complex, production-critical environments.

Responsibilities:

• Design, deploy, and support wireless network infrastructure across manufacturing sites
• Conduct wireless site surveys to assess coverage, performance, and environmental constraints
• Install, configure, and optimize wireless networks to support AMR system operations
• Deploy and support Cisco Identity Services Engine (ISE) and Cisco Cyber Vision
• Perform network testing, tuning, and troubleshooting in live production environments
• Coordinate with plant IT teams, operations, and external vendors during deployments
• Develop and maintain standardized documentation for network configurations and processes

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Systems, or related field
• 5+ years of experience in network engineering or infrastructure deployment
• Strong experience with Cisco networking technologies
• Hands-on experience with wireless network design, deployment, and optimization
• Experience with Cisco ISE (authentication, policy enforcement, segmentation)
• Experience deploying networks in manufacturing or industrial environments
• Ability to troubleshoot complex network issues in real-world conditions

Preferred Qualifications:

• Experience with Cisco Cyber Vision or industrial security platforms
• Experience with OT (Operational Technology) or industrial IoT environments
• Experience supporting large-scale, multi-site deployments

Job Description:

• The Process Engineering Supervisor is responsible for supervising salaried bargaining unit process engineers in the development of process tooling for trim, chassis, and final operations from vehicle design concept through in plant vehicle launch.
• Champion data driven decisions.
• Manage complex projects from beginning to end and meet project budget and timing targets.
• Manage issues and drive root cause analysis, utilizing tools such as Fishbone diagrams, 5 why's, FMEAs, Pareto Charts, Histograms, Six Sigma, and Red X.
• The Process Engineer Supervisor also directs design for manufacturing concepts throughout all projects big or small and works to develop a solid team atmosphere empowering direct report to take ownership of their processes.
• The successful candidate must have the ability to communicate effectively with all levels of management. Extensive travel may be required.

Basic Qualifications:

• Bachelor's degree in engineering or related technical discipline
• 5+ years of experience related to automotive assembly technology supervision * Knowledge of CAN software
• Good written and communication skills
• Good computer skills with proficiency in Microsoft Office Excel, PowerPoint, Word and Google Suite
• Good project management/problem solving skills
• Self-directed and willing to work any shift and overtime as required
• Willing to travel both domestically and internationally as required
• Ability to work overtime as needed including nights and weekends and travel domestically/internationally as required

Preferred Qualifications:

• Bachelor's degree in electrical engineering or automotive technology
• Strong leadership/problem solving skills
• 5+ years of supervision experience in automotive manufacturing assembly
• Demonstrated experience in Focused Problem Solving (Kaizen methodology)
• Experience in electrical and/or torque strongly desired
• Experience working with vehicle CAN and CAN-FD networks and diagnostic tools

Job Description:

• A Client Design Release Engineer (Interior/Cockpit) is an engineering professional responsible for the design, development, and production release of interior vehicle components like the cockpit, ensuring they meet performance, quality, safety, and cost requirements throughout the product lifecycle.
• This role involves collaborating with internal teams and external suppliers to manage design feasibility, technical specifications, validation testing, risk assessment (DFMEA), and production processes, ultimately ensuring a successful and robust interior design is integrated into the final vehicle. 

Key Responsibilities:

• Design & Development: Drive the design and development of interior and cockpit components from concept through production release. 
• Supplier Collaboration: Work closely with suppliers on design feasibility, manufacturability, cost, and adherence to engineering standards. 
• Technical Leadership: Provide technical guidance and support to resolve design issues, material selection challenges, and process problems. 
• Validation & Testing: Develop and implement validation testing strategies, including component, vehicle, and durability testing, to ensure components meet performance metrics. 
• Risk Management: Lead risk assessment activities, such as Design Failure Mode and Effects Analysis (DFMEA), to ensure design robustness and mitigate potential issues. 
• Documentation: Generate and manage technical documentation, including system and sub-system technical specifications. 
• Cross-Functional Integration: Partner with manufacturing, quality, testing, and vehicle integration teams to ensure seamless implementation and integration of interior designs. 

Required Skills & Qualifications:

• Education: Bachelor of Science degree in Mechanical Engineering or a related field is typically required. 
• Experience: 3-5 years of relevant experience in design/development engineering, particularly in Body, Chassis, or Interior Systems. 
• Technical Proficiency: Experience with computer-aided design (CAD) tools, design validation processes (DVP), and failure mode analysis (DFMEA).Proficiency in plastic injection molding and trim assembly processes, Knowledge of ergonomic design and HMI integration, CAD expertise for packaging and design, Understanding of safety and regulatory requirements, Experience with fit & finish and perceived quality optimization.
• Soft Skills:Strong communication, leadership, problem-solving, organizational, and detail-oriented skills are essential. 
• Collaboration: Demonstrated ability to work effectively in a team environment and interface professionally with cross-functional teams and management. 

• Create written and illustrated manufacturing instructions, bills of material and outside purchase specifications per engineering drawings/specifications.
• Develop and improve manufacturing processes and tooling for composite parts
• Work with production teams to ensure manufacturability and suggest improvements.
• Train production staff in new processes and techniques.
• Providing manufacturing support to design throughout conceptual, preliminary, and detailed design phases, to include validation, customer approval, manufacturing, and operational service.
• Support design with material selection based on usability and compatibility with current processes and equipment.
• Review and disposition nonconforming material to technical requirements.
• Develop and validate repair processes in conjunction with design team.
• Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements.
• Ensure compliance with established engineering methodologies
• Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems.

• A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience
• A Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience
• Effective problem identification and solution skills
• Strong project ownership, execution, and proactive mentalities
• Experience with mechanical manufacturing processes (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar)
• Experience with GD&T and print interpretation.
• Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems)
• Experience in advanced Composite and Bonded Structures manufacturing (ie. Fiber Reinforcement, Curing, Ovens and Autoclaves, Adhesives, Surface Preparation, etc.) 

• Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter
• Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace.
• Experience with design for manufacturing & assembly
• Understanding of manufacturing cost and reproducibility
• Experience with implementation of PFMEAs

• Execute the design, analysis, or evaluation of project assemblies using sound engineering principles and adhering to industry standards, practices, procedures, and product / program requirements.
• Function as a design/structures engineer for hybrid composite-metallic components used in engine testing stands.
• Providing design support throughout conceptual, preliminary, detailed design phases, to include validation, customer approval, manufacturing, and operational service.
• Responsible for material selection, determination of laminate architecture, generation of detail/assembly-level CAD models, and design of sub-element components.  May also include designing to a given surface.
• Assist in manufacturing process development with the engineering team and ensure the manufacturability of component designs, documenting and presenting results to management and external customers.  Assist shop floor personnel when needed.
• Review and disposition nonconforming material to technical requirements.
• Develop and validate repair processes in conjunction with manufacturing team.
• Support vendor management through reviews of quotes and requests for modifications of technical requirements.
• Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements.
• Ensure compliance with established engineering methodologies
• Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems.
• Provide engineering / technical support in a production environment

• A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience
• An Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience
• Effective problem identification and solution skills
• Strong project ownership, execution, and proactive mentalities
• Experience developing technical ideas with internal/external customers and a track record of converting ideas to programs
• Experience with mechanical and composite design (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar)
• Experience with GD&T to include determining tolerance requirements.

• Advanced Degree in Engineering
• Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter
• Computer Aided Engineering software experience 
• Experience with composite design, analysis, and manufacturing.
• Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace.
• Experience with design for manufacturing & assembly
• Understanding of manufacturing cost and reproducibility
• Familiarity with principles of product development, reliability and quality control
• Experience with configuration management.
• Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems)
• Experience in advanced Composite and Bonded Structures design and manufacturing(ie. Organic/Polymer Matrix Composites, Fiber Reinforcement, Manufacturing methods, Adhesives, Surface Preparation, etc.) 

Position Summary

• Client is looking for a Warranty Hub Housing Troubleshooting Engineers to support warranty analysis and issue resolution using GIMS (Global Issue Management System).
• This role focuses on identifying, analyzing, and resolving housing-related warranty concerns, ensuring rapid containment and long-term corrective actions.
• The position sits at the intersection of warranty, quality, and engineering, making it ideal for junior-to-mid engineers looking to grow technical and analytical expertise within a global automotive OEM.

Key Responsibilities

• Monitor and analyze warranty claims and field data related to hub housing and associated components
• Use GIMS to track issues, document root cause investigations, and manage corrective actions
• Perform failure analysis and troubleshooting on returned parts and field reports
• Collaborate with design, manufacturing, quality, and supplier teams to identify root causes
• Support development and validation of containment, corrective, and preventive actions (CAPA)
• Prepare technical summaries, dashboards, and reports for management review
• Support plant visits, teardown activities, and supplier investigations as required

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Automotive Engineering, or similar discipline
• 1–4 years of experience in warranty, quality, manufacturing, or engineering support roles
• Basic understanding of automotive systems and components, particularly housings or structural parts
• Experience or exposure to warranty systems or issue tracking tools (GIMS preferred)
• Strong analytical and data interpretation skills

Preferred Qualifications

• Experience working with field/warranty data analysis
• Familiarity with RCA,  8D problem-solving methodologies
• Exposure to manufacturing processes (casting, machining, assembly)
• Understanding of supplier quality processes
• Automotive OEM or Tier 1 supplier experience

Key Competencies

• Structured problem-solving
• Attention to detail
• Technical curiosity and learning mindset
• Effective written and verbal communication
• Ability to work in a fast-paced, issue-driven environment

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

Design material flow processes and storage systems to establish efficient material delivery to the factory and sub-assembly lines for electric vehicle automotive components. Interface with Manufacturing Engineering, Packaging, Logistics Operations, EH&S during launch to develop Material Flow processes and systems. Identify and implement continuous improvement projects. Complete dock utilization analysis, support dynamic simulations, maintain PFEP data, calculate storage space requirements and design material delivery routes. Input and report out KPI data on a weekly basis. Develop business cases as needed for Material Flow installations. Contribute to internal document development, standards, best practices, lessons learned and training modules. Develop requirements for Material Flow equipment: fork trucks, tuggers, dollies, and lineside display. Develop station layouts for lineside operations, offline SPD cells, kitting, and repack activities. General Optimization of floor space, logistics, delivery, and display equipment in the assembly plant. Prioritize Material Flow Layout Engineer activities. Coordinate Layout Engineer and Equipment design staff activities. Experience with installation of material handling equipment such as Rack indexers, turn tables, over/under shuttles, and conveyors. New launch projects on specific production lines focusing on material flow from warehouse to the border of line location. Set up of new part numbers and engineering changes. Creation of station designs from scratch, in base of production rate and according assembly processes.

Requirements:  Bachelor’s Degree in Industrial Engineering, Mechanical Engineering, or Automotive Engineering with 6 months experience, 40 hr/wk, $78,666/yr. Send resumes to:  Alten Technology USA Inc, 3221 W Big Beaver Road, Ste: 116, Troy, MI-48084, or email to: altentalentacquisition@alten.us.com.  Please use the reference number in the title of the email: Ref. M-2531.

Overview

The Thermal Systems Design Release Engineer (DRE) is responsible for the design, development, validation, and release of thermal management components and subsystems for vehicle programs. This includes cooling modules, HVAC systems, refrigerant circuits, battery thermal systems, pumps, valves, heat exchangers, lines, and related hardware. The DRE ensures that all components meet OEM performance, durability, cost, quality, manufacturing, and timing requirements from program kickoff through Job 1 and lifecycle support.

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

Thermal Component & Subsystem Ownership

• Serve as the engineering owner (“single point of responsibility”) for assigned thermal hardware within an OEM vehicle platform.
• Translate program-level vehicle thermal targets into component specifications and technical requirements.
• Maintain system compatibility with vehicle-level architecture, controls, electrical interfaces, and packaging constraints.

OEM Design & Release Execution

• Create and maintain CAD models, 2D drawings, specifications, and engineering documents in the PLM system.
• Drive part number creation, BOM updates, and engineering releases through all OEM gateway milestones.
• Lead design reviews with cross-functional OEM engineering teams.

Supplier and Sourcing Interface

• Act as the primary technical lead for supplier interactions, communicating requirements and performance expectations.
• Review and approve supplier DFMEAs, DV plans, drawings, and material selections.
• Support sourcing activities with Purchasing and track tooling, PPAP, and launch readiness.

Validation & Vehicle Build Support

• Develop and execute DVP&R for thermal components.
• Support prototype, mule, VFF, and production build phases at facilities.
• Resolve issues identified during thermal testing, weather trips, and wind tunnel evaluations.

Quality, Manufacturing, & Launch Readiness

• Collaborate with Manufacturing Engineering to ensure designs meet plant requirements.
• Support PFMEA, control plan reviews, and PPAP documentation.
• Address launch issues such as leaks, NVH, restricted flow, and supplier non-conformances.

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related field.
• 3 years’ experience in automotive thermal systems.
• Strong understanding of heat transfer, fluid dynamics, and thermal system behavior.
• Proficiency with OEM CAD and PLM systems.
• Ability to lead component design in a complex OEM environment.
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

Preferred Qualifications

• Experience with EV thermal architectures and advanced cooling systems.
• Familiarity with APQP, PPAP, DFMEA, and DVP&R.
• Knowledge of heat exchanger, pump, valve, and hose manufacturing processes.
• Strong supplier management and launch experience.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $110,000.00 - $135,000.00

Internal leveling code: IC9