Your Opportunity

Scion is in search of a Porter/Gatekeeper to provide optimal care and maintenance of a residential property's common areas. The Porter is responsible for the general cleanliness and upkeep of common areas, indoor and outdoor. This position may also be required to assist with general maintenance needs, cleaning and moving services.

The Porter is customer-centric oriented and excels in a collegiate environment. This role demands initiative, an eye for detail and unwavering follow through. 

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Maternal Leave
• Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry standards.
• Perform physically demanding work to maintain the asset, and other property features to minimize liability concerns.
• Remove trash and other debris from the common areas on a continuous basis.
• Sweep and remove debris from the curbs, parking areas, walkways and stairways as scheduled.
• Maintain and repair loose stairwell treads.
• Maintain and repair exterior lighting by replacing burned out bulbs and reporting inventory to supervisor.
• Mow all lawn areas, remove clippings as scheduled, trim all planting beds, rake and remove leaves and other debris from landscaped areas.
• Apply weed and feed to lawn areas as scheduled; top seed and water areas as needed.
• Install seasonal plantings, replacement shrubs and trees, decorative rock and water features.
• Trim and prune trees and shrubs as directed.
• Maintain, adjust and repair irrigation system and fountains as needed.
• Clean pool and spa in accordance with manufacturer specifications and code compliance.
• Perform routine maintenance and repairs to pool equipment, as directed.
• Know the emergency procedures for the property, including the location and how to engage water and gas shutoff valves and access to sewer cleanouts and fuse panels.
• Promote safety awareness to limit property loss and damage or injury to residents and visitors to the property.
• Keep drainage grills on grounds clear of leaves.
• Pressure-wash sidewalks, buildings, pool decks, etc.
• Assist in snow removal at property, as required.
• Undertake training related to job duties as deemed necessary.
• Maintain required property uniform and present a professional appearance and attitude.

The responsibilities listed above may not be all inclusive.

What We Require

• High school/GED or trade school diploma and one year of full-time experience in some aspect of lawn/grounds maintenance, or an equivalent combination of education and experience
• Efficient in reading instructions and documenting labor and materials
• Record of punctuality and dependability, ability to work with under pressure of deadlines, and schedule flexibility to accommodate after-hours and weekend emergencies
• Possession of a valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property.
• Serves in an “on-call” capacity, except during approved PTO periods.

Breeze is hiring- join us!

Under the general direction of the Materials Operations Supervisors, the Materials Specialist maintains the warehouse inventory, shipping, receiving, and transportation of materials. This person will be working with the Maintenance Department at the station to ensure adequate supply of materiel for aircraft maintenance and ensure material needs are met throughout the organization. Material Specialists work with others to execute logistics in a detail-oriented, dynamic, and safe environment.

Starting pay is $18.50

*$2.00 shift differential added when working from 9:00PM - 7:30AM 

Here’s what you’ll do

• Responsible for daily oversight of Material Stores and Line Material operations
• Oversee and problem-solve issues associated with inventory accuracy, parts issuing, shipping, receiving, stocking, material handling, and equipment
• Responsible for warehouse operations of Technical and Non-Technical inventory
• Perform data entry into the company inventory system to include locating, issuing, receiving, shipping of materials, warehousing of supplies, tools, and materials
• Collaborate with Maintenance Operations Control (MOC) for movement of inventory, tooling, and special equipment for Aircraft on Ground (AOG) recovery
• Monitor and update stock items, minimum and maximum stock levels, and coordinate stock level adjustments with Maintenance, Purchasing, and/or other departments within the company
• Perform inventory audits, inspections, inventory reconciliations, and maintain compliance with the General Maintenance Manual (GMM)
• Conduct physical inventory, ensuring adherence to minimum and maximum stock levels
• Work in conjunction with Maintenance and Quality departments to complete calibrated tooling, Shelf-Life audits, and replacements for monthly regulatory compliance
• Perform periodic receiving inspection functions as assigned to by Quality Control
• Prepare Hazmat material shipments in accordance with International Air Transport Association (IATA) regulations
• Coordinate with Engineering and Maintenance Planning to prepare fleet modification kits
• Other duties as assigned by the Manager of Materials
• Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence

Here’s what you need to be successful

Minimum Qualifications

• High school diploma or equivalent educational achievement
• 1 yr minimum experience with data entry or inventory management
• Strong technical and analytical background to provide TRAX, Excel, and other reports
• Must possess a valid Driver’s License and a driving record that meets Breeze Airways standards
• Ability to drive company vehicles, trucks, forklifts, and other Ground Service Equipment (GSE)
• Pass Materials and the General Maintenance Manual (GMM) training courses
• Pass and ship Dangerous Goods (DG) International Air Transport Association (IATA) and ground course and maintain recurrent training for both certifications
• Must have authorization to work in the U.S. as defined by the Immigration Reform Act of 1986
• Operate 5K & 15K forklifts to coordinate shipping and handling of aircraft engines and GSE equipment
• Pass a ten (10) year background check and criminal history records check (CHRC)
• Valid Passport with no restrictions to travel outside of the United States
• Must be able to obtain and maintain a SIDA badge in accordance with TSA requirements
• Must be able to secure appropriate airport authority and / or US Customs security badges.
• Must be fluent in English
• Must be at least 18 years of age
• Organizational fit for the Breeze culture, that is, exhibit the Breeze values of Safety, Kindness, Integrity, Ingenuity and Excellence
• Self-starter must have a positive attitude and strong desire for success

Preferred Qualifications

• 4-year degree in Business, Aerospace, or other relevant field/ or received a certificate from an acceptable trade/technical school.
• TRAX (M&E) Inventory system
• Warehousing or experience in a stockroom environment

Skills/Talents

• Excellent communications skills, both verbal and written
• Strong presentation skills with the ability to communicate to Leadership
• Must be able to handle high-stress situations
• Microsoft Office Suite (Outlook, Excel, Word)
• 24- hour operation may require holiday, weekend, overtime, or late-night work
• Well-groomed and able to maintain a professional appearance
• Ability to comply and maintain Occupation Safety and Health Administration (OSHA) standards
• Ability to lift, carry, and move medium to heavy weights of 50 pounds or more
• Must be able to climb, bend, kneel, crawl, and stoop frequently in relatively confined spaces
• Exemplifies Breeze’s safety culture, values, and mission
• Ability to work with individuals and teams at all levels in the organization

Perks of the Job

• Health, Vision and Dental
• Health Savings Account with Breeze Employee Match
• 401K with Breeze Employee Match
• PTO
• Travel on Breeze and other Airlines too!

Your Opportunity

Scion is paving a path in student living and the Facilities Technician is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician is a solution-oriented professional who excels in a fast-paced, agile, collegiate environment. This role demands superior customer service and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Maternal Leave
• Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Demonstrate proficiency in Entrata and CMMS systems for logging of service requests and completed work in a timely matter.
• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry standards.
• Perform physically demanding work to maintain the asset, and other property features to minimize liability concerns.
• Execute maintenance objectives and daily assignments with the Facilities Supervisor.
• Diagnose and perform minor and routine maintenance/repair in a timely and professional manner.
• Assure all service requests are completed daily.
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of completion.
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident trust.
• Inspect vacated apartments and records necessary repairs and maintenance, informing the Facilities Supervisor of needed services and repairs.
• Routinely perform duties including basic appliance repair, general carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the General Manager/Property Manager.
• Routinely inspect interior common areas and the exterior of the property, ensuring daily upkeep of all common areas with company standards, and all the light fixtures are in working order.
• Complete preventive maintenance tasks on all equipment and operating systems to ensure warranty compliance and extended useful life, inspecting units and common areas for fire extinguishers, smoke alarms, CO2 alarms, filter changes, active utilities, and any work needed.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as assigned.
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and safe.
• Maintain parts and supplies inventory, as authorized. Cleans and organizes the workshop, storerooms, boiler rooms, and utility rooms.
• Unlock apartment doors and accompanies/escorts various vendors as needed.
• Keep drainage grills on grounds clear of leaves.
• Clean pools; adjust and maintain chemicals to proper levels, if needed.
• Pressure wash sidewalks, buildings, pool decks etc.
• Assist in snow removal at property, as required.
• Set up and take down tables, chairs, etc. for tenant functions.
• Assume responsibility for after-hours emergencies at the direction of the supervisor.
• Maintain required property uniform and present a professional appearance and attitude.
• Undertake training related to job duties as deemed necessary.

The responsibilities listed above may not be all-inclusive.

What We Require

• High school/GED or trade school diploma and a minimum of 1-3 years of full-time general maintenance experience, or an equivalent combination
• EPA 608 Type I certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND2

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND2 #wearehiring #werehiring 

Location: Florida, Louisiana, Texas

Position Summary

The Senior Estimator supports the bidding process by development and preparation of cost estimates for projects or services as assigned. This role follows the standardized procedures, methods, and processes for estimating that have been established. Coordinates overall estimates and proposals in conjunction with the assigned capture-team and present periodic and final submittals to the regional manager and other corporate representatives as required for review and input. Estimator must exemplify Forgen Core Values, contributing to the culture, growth, and performance of the entire company. Position may require frequent travel.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• Demonstrate excellent verbal and written communication skills.
• Work with an assigned capture team to identify and develop solutions and estimate the resources required for both simple and complex projects.
• Prepare detailed and organized cost estimates using HCSS software and assist with other submittal documents (including schedules, diagrams, work plans, figures, etc.) for proposals that require additional information as part of the bidding process.
• Assess and communicate project risks based on a thorough knowledge of proposal documents.
• Coordinates the preparation of quantity takeoffs from project plans and documents with help from the capture team.
• Understand measurement and payment terms and apply to the development of an estimate.
• Thoroughly understand drawings and specifications and review with capture team and identify areas of concern that may require additional clarification prior to the bid date.
• Understand how equipment and labor rates are developed and applied accurately to estimates.
• Help identify ideas that will create competitive advantages over the other bidders.
• Coordinate with capture team to obtain multiple competitive quotes for materials and subcontracted services.
• Prepare ‘high-level’ proposal schedules utilizing critical-path scheduling software.
• Help to maintain updated database of cost information (historical cost analysis of labor and equipment rates).
• Attend pre-bid walks (preconstruction meetings) as needed and utilize comprehensive industry experience to determine the technical needs of the project based upon site restrictions.
• Assemble bid-files (including all development information) that were utilized in preparation of the estimates.
• Create professional relationships and uphold our reputation with our clients and partners by interfacing effectively with owner/client, engineers, subcontractors, and vendors.
• Meet deadlines and put in the time needed to complete bids, estimates and related tasks.
• Provide mentorship to estimating staff and interns.
• Perform additional assignments as directed.

Basic Qualifications

• Bachelor’s Degree in Engineering, Construction Engineering, Construction Management or equivalent experience.
• Eight (8+) years of estimating experience in heavy-civil preferred or similar industries (geotechnical and/or environmental remediation fields).
• Scheduling software experience (Primavera/MS Project) is required.
• Estimating software experience (Bid2Win/B2W, HCSS, or similar) is required.
• Quantity takeoff software experience (Agtek/AutoCAD).
• Skilled in project management and analytical thinking, with strong construction engineering knowledge.
• Motivated, safety-focused, and committed to excellence, ethics, and integrity.
• Strong organizational, time management, and attention to detail, with ability to meet goals independently.
• Proficient in Microsoft Office, Outlook, and Excel.
• Excellent communication, leadership, and problem-solving skills, with proactive and creative decision-making.
• Collaborative team player, responsive to both internal and external stakeholders.
• Valid Driver’s License and ability to drive on behalf of company business.

Preferred Qualifications

• Experience estimating on >$2 Mil projects is preferred.

Physical Demands & Work Environment

This office-based role requires frequent computer use and effective communication, with occasional travel to project sites as needed. Site visits may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Perks and Benefits

Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards.

***$10,000 Cash Bonus will be awarded after a 12 month commitment to Breeze***

• $5,000 after six months
• $5,000 after 12 months

Breeze is hiring- join us!

Breeze Airways is the newest, nicest, fastest growing airline with maintenance bases in Windsor Locks, CT (BDL), Charleston, SC (CHS), New Orleans, LA (MSY), Norfolk, VA (ORF), Provo, UT (PVU), Tampa, FL(TPA), Providence, RI (PVD), Orlando, FL (MCO), Fort Myers, FL (RSW) and Raleigh-Durham, NC (RDU)!

Breeze is looking for great and experienced talent. Your entry pay will be based on your experience and our established criteria.

*$2.00 shift differential added when working from 9:00PM - 7:30AM 

The Aircraft Maintenance Technician (AMT) is responsible for performing maintenance, preventative maintenance, and alterations of Breeze aircraft, including troubleshooting, performing run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance Technician reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures.

As certified AMTs, you have an important role to ensure the safety of our fellow Breeze Team members and Guests as well as the airworthiness of our fleet.

Here’s what you’ll do

• Perform all assigned maintenance duties in accordance with the Breeze General Maintenance Manual (GMM)
• Responsible and accountable for all work performed
• Complete all appropriate Breeze forms on all work assigned and performed
• Properly handle all parts, units, assemblies, and aircraft while in the repair process
• Ensure that all documentation is kept current as to open discrepancies and completed corrective actions
• Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly
• Submit personal OJT Task Cards on time and accurately
• Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks
• Properly care for and use tooling and equipment used for aircraft maintenance
• Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft
• Maintain a valid Airframe & Powerplant (A&P) Certificate, or Repairman Certificate, and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager
• Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM
• Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence

Here’s what you need to be successful

Minimum Qualifications

• Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types
• Ability to read and interpret aircraft maintenance manuals and specifications
• Must have a valid driver’s license
• Must be at least 18 years of age
• High school diploma or equivalent educational achievement
• Must have a valid passport with no travel restrictions
• Must have authorization to work in the US as defined by the Immigration Reform Act of 1986
• Must have the ability to travel unrestricted to and from the United States
• Must be flexible and willing to work all shifts to support a 24/7 operation. 
• Must be willing to travel 20% of the time
• Must be willing to work with other departments within the company as needed
• Must pass a DOT pre-employment drug test
• Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check
• Must be able to obtain and maintain a SIDA badge in accordance with TSA requirements

Preferred Qualifications

• Understanding and working knowledge of FAA regulations including FAR part 121 operations
• Experience maintaining Embraer E-Jet and/or Airbus A220 family aircraft
• Familiar with an airline Maintenance Information System (MIS) such as TRAX
• Degree in Aerospace, Aviation Maintenance or Business Degree preferred

Skills/Talents

• Skills in Microsoft Office Suite (Word, Excel, Outlook)
• Must be fluent in English
• Exemplifies Breeze’s safety culture, values, and mission
• Excellent oral and written communication skills
• Excellent problem-solving skills
• Ability to work with individuals and teams at all levels in the organization

Perks of the Job

• Health, Vision and Dental
• Health Savings Account with Breeze Employee Match
• 401K with Breeze Employee Match
• PTO
• Travel on Breeze and other Airlines too!

***$10,000 Cash Bonus will be awarded after a 12 month commitment to Breeze***

• $5,000 after six months
• $5,000 after 12 months

Breeze is hiring- join us!

The Lead Aircraft Maintenance Technician (AMT) is responsible for assigning, leading, directing, or approving work of other AMT’s under his/her supervision and participates in the performance of work as required.  The Lead AMT reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures.

Breeze is looking for great and experienced talent. Your entry pay will based on your experience (up to $39.00 starting pay) and our established criteria.

$2.00 shift differential added when working from 9:00PM - 7:30AM 

Here’s what you’ll do

• Assigns, leads, and directs the work of AMT’s under his/her supervision
• Ensures that all work performed and maintenance duties are in accordance with the Breeze General Maintenance Manual (GMM) and company policy and procedures
• Responsible and accountable for all work performed at the local station
• Communicates with Maintenance Operations Control (MOC) with aircraft status
• Complete all appropriate Breeze forms on all work assigned and performed
• Properly handle all parts, units, assemblies, and aircraft while in the repair process
• Ensure that all documentation is kept current as to open discrepancies and completed corrective actions
• Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly
• Submit personal OJT Task Cards on time and accurately
• Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks
• Properly care for and use tooling and equipment used for aircraft maintenance
• Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft
• Maintain a valid Airframe & Powerplant (A&P) Certificate and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager
• Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM
• Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence

Here’s what you need to be successful

Minimum Qualifications

• Must be at least 18 years of age
• High school diploma or equivalent educational achievement
• Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types
• 5+ years of aviation maintenance experience maintaining commercial aircraft
• Ability to read and interpret aircraft maintenance manuals and specifications
• Must have a valid driver’s license
• Must have a valid passport with no travel restrictions
• Must have the authorization to work in the US as defined by the Immigration Reform Act of 1986
• Must be flexible and willing to work days, nights, weekends, holidays, and overtime if needed
• Must be willing to travel 20% of the time
• Must be willing to work with other departments within the company as needed
• Must pass a DOT pre-employment drug test
• Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check
• Ability to read, write, speak, and understand the English language
• Must be able to obtain and maintain a SIDA badge in accordance with TSA requirements

Preferred Qualifications

• Understanding and working knowledge of FAA regulations including FAR part 121 operations
• Experience maintaining Airbus A220 & Embraer E-Jet family aircraft
• Familiar with an airline Maintenance Information System (MIS) such as TRAX
• Degree in Aerospace, Aviation Maintenance or Business Degree preferred

Skills/Talents

• Skills in Microsoft Office Suite (Word, Excel, Outlook)
• Must be fluent in English
• Exemplifies Breeze’s safety culture, values, and mission
• Excellent oral and written communication skills
• Excellent problem-solving skills
• Ability to work with individuals and teams at all levels in the organization

Perks of the Job

• Health, Vision and Dental
• Health Savings Account with Breeze Employee Match
• 401K with Breeze Employee Match
• PTO
• Travel on Breeze and other Airlines too!

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American- produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean

and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly

lower capital cost. We are seeking qualified applicants for the position of Technician, Environmental for the Plaquemines LNG facility.

General Description:

The Environmental Technician shares responsibility for the implementation and management of the environmental management system to meet business objectives and to maintain site environmental permits to operate with a primary focus on compliance. The Environmental

Technician provides hands-on environmental support across the site. A successful candidate will be required to have full competency in a range of technical and operational skillsets obtained through prior work experience, education, or a combination of both.

Responsibilities:

• Assist VG Environmental Department in maintaining compliance with various environmental management programs through inspections, audits and other methods

including but not limited to multimedia (air, water, waste) monitoring and sampling, stormwater inspections, waste management oversight, preparing waste containers for transport, conducting routine RCRA area inspections, conducting routine tank/container

inspections, and responding to minor spills/leaks.

• Provide field support to all Environmental Specialists and Supervisors.

• Provide environmental training to personnel.

• Ensures that the environmental aspects of operating unit procedures are adequate and applied to achieve environmental performance goals.

• Serves as a facility resource for environmental-driven plans, policies, and procedures

• Serves as an on-call contact and responder for environmental issues.

• Assists in developing and achieving area or plant environmental goals.

• Ensures environmental compliance tasks are completed on time.

• Performs environmental monitoring, data collection and analyses for the facility.

Required Qualifications:

• Education and Certifications: A minimum of an associate’s degree in a science related field and/or 4+ years of relevant Military training OR A High School Diploma and five years of relevant experience.

• Must have a current, valid US driver's license

• Must be willing and able to work overtime as needed

• Willingness to work a 7/7 rotating schedule

• Transportation Worker Identification Credential (TWIC) card in good standing.

• Good communication skills

• Must be able to work in hot and humid environments, outdoors and lift 50 pounds

• Computer knowledge including Apple Mac, Microsoft Office Suite including Outlook, Word, Excel, Visio, Project & PowerPoint.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Work when you want – Earn what you need!

Delivering Legal Documents in your area with ABC Legal Services allows you to have a flexible schedule and take on as much or as little work as you want. We give you the training and tools you need, including an industry-leading mobile app that allows you to claim jobs, map your stops, and track your pay.

Who is ABC Legal?

We are a premier legal services company operating nation-wide. Our clients are banks and law firms, but we are governed by the courts and the rules of civil procedure. We value honesty and accuracy, and are looking for organized, independent, and personable people to deliver legal documents in all 50 states.

What’s the Key to Process Server Success?

• Be organized
• Plan your route
• Go when people are likely to be home
• Be pleasant and personable with the people you meet and to whom you deliver documents

Successful Process Servers work independently, have an entrepreneurial mindset, take pride in their work, and love to connect with people. Whether you’re looking for a full-time career or a part-time gig, serving legal documents with ABC offers the perfect opportunity for a flexible schedule outside of a traditional office setting.

What do you need to be a Process Server?

• Must have your own reliable transportation, valid driver’s license and insurance
• Tech savvy – iPhone/iPad or Android smart device and ability to work within a mobile app
• Ability to scan and print documents
• Ability to work variable hours -- Early mornings, evenings and weekends
• Experience in process serving or related work is helpful, but not required
• Some states require you to be a Registered Process Server 
• State laws vary, and some require you to meet a minimum age to serve
• Legally allowed to work in the United States, without work authorization

The Perks of Process Serving!

Process Servers benefit from many advantaged by contracting with ABC Legal Services, including:

• Flexible schedule – Choose your workload, with attempts required every 48 hours, varied times.
• Flexible service area – Set your own service areas and claim jobs right on our app
• Competitive wages – Earn fair wages for each job you attempt and resolve
• Mobile capability – Claim jobs, map out your stops and track your pay all through our app
• Support – Have all your questions answered by our knowledgeable support team

#INDP2

Location: Baton Rouge, LA

Position Summary

Forgen is seeking students pursuing degrees in Occupational Health & Safety, Civil Engineering, Construction Management, or related fields—along with other interested candidates—to join our project locations for internship opportunities.

This internship provides hands-on experience supporting workplace safety initiatives within a construction environment. The Safety Intern assists in promoting and maintaining a strong safety culture by helping implement safety policies and procedures, conducting site observations, and supporting compliance with regulatory and company standards.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

EHS Program Administration

• Update project safety plan and procedures.
• Maintain documentation to improve safety performance.
• Track program effectiveness and recommend improvements.

Regulatory Compliance

• Assist with regulatory reporting, recordkeeping, and audits.
• Monitor regulatory updates and integrate into the project plans.
• Ensure compliance with various agencies (e.g., OSHA).

Data Management and Reporting

• Maintain safety dashboards and performance metrics.
• Compile monthly stats for site management.
• Tracking leading indicators such as observations, training, and inspections.
• Support analysis of trends to identify risk areas.

Basic Qualifications

• Candidates must be working toward a BS degree in Occupational Health & Safety, Environmental Health & Safety, Civil Engineering, Construction Management, or a related field.
• Valid Driver’s License and ability to drive on behalf of company business.

Physical Demands & Work Environment

This office and field hybrid role requires frequent computer use and effective communication. Site work may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Location: Donaldsonville, LA

Position Summary

This position involves various manual and grading tasks including, but not limited to setting grade markers; monitors grade to guide earth moving equipment operators in sloping and fill embankments; operates and understands the use of a variety of measuring instruments and hand tools. Work will be performed per the Superintendent’s instruction and/or assigned representative, free from direct supervision except for more complicated jobs.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• Embrace Forgen’s Core Values in all aspects of the job.
• Participate in a drug-free workplace with a random drug testing program.
• Responsible for driving a safety culture which promotes Incident and Injury Free Performance.
• Responsible for setting up and calibrating base and rover survey equipment, including but not limited to Trimble and Topcon systems.
• Perform surveying tasks using equipment such as Trimble and Topcon for stakeouts, point collection, grading checks, and other assigned duties.
• Manage the configuration of construction equipment with GPS capabilities, including loading machine files and collecting relevant data to support project operations.
• Use hand-held mobile radio units to coordinate tasks and resources.
• Read and comply with safety plans, rules, maintenance instructions, training materials, Safety Data Sheets (SDS), warning tags, traffic signs and procedure manuals.
• Ability to perform other related duties as assigned.

Basic Qualifications

• High school diploma/GED or equivalent.
• Valid Driver's License and ability to drive on behalf of company business.
• 5+ years’ experience in grade setting and layout in the horizontal construction field.
• 5+ years’ of experience using Trimble GPS equipment.
• 5+ years’ experience setting grades, slopes, and understanding cut and fills.
• Ability to work with others or independently under minimal supervision.
• Ability to add, subtract, multiply, and divide into all measure units, using whole numbers, common fractions, and decimals.
• Ability to apply common sense understanding to carry out detailed written or oral instructions.
• General computer operation is necessary.
• Ability to embrace a culture of safety.
• Reads and sets grade markers following construction plans.
• Operates and ensures proper use of grade equipment.
• Observes excavating activities to verify conformance to marker references and notifies equipment operators and Foreman of deviations.
• Interacts and professionally communicates with construction crew members who facilitate alignment, movement, and adjustment of the equipment to complete confirmation of grade specifications for the construction project.
• Familiar with completing original surface topographical mapping.
• Competency inaccurate layout for various jobs and communicating with project managers on specifics of each job requirement.
• May perform various other labor-intensive activities as instructed by Superintendent to help ensure timely project completion.
• Self-sufficient, capable of the following direction, and working unsupervised when needed.
• Excellent customer relations skills.
• Work extended hours, including evenings and weekends as required.

Preferred Qualifications

• 40 Hour HAZWOPER training
• Competent Person Safety Training
• 8-Hour Supervisory Training
• 30-Hour OSHA Construction Safety Training
• First Aid and CPR

Physical Demands & Work Environment

This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Location: Baton Rouge, LA

Position Summary

Forgen is seeking students pursuing degrees in Civil Engineering, Construction Management, or related field; and other interested candidates to join our various project locations for internship opportunities.

This internship applies the general knowledge of the physical sciences and mathematics underlying engineering and specialized knowledge of the mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology and surveying. The Project Engineer Intern assists with the overall execution of projects in accordance with the established budget, schedule, contract plans and specifications.  Ensure the company’s safety culture is documented, communicated, and enforced in accordance with the company’s established policies and procedures.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• • Field Tasks:
• Prepare project submittals.
• Maintain project record documents.
• Perform technical review of contract plans and specifications.
• Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures.
• Prepare daily construction reports and progress tracking.
• Manage, interpret, and perform site surveying.
• Assist with the management of subcontractors.
• Assist with the procurement or rental of equipment and materials.
• Assist Project Manager with project daily cost reporting and tracking.
• Travel to project sites as necessary for extended durations.
  • Office Tasks:
• Assist in the development of project cost estimates, proposals, and material take-offs.
• Perform technical analysis of the remediation methodologies of various previously remediated projects.
• Perform other administrative or office duties as required or as assigned.
• Adhere to all federal, state, and local regulations.
• Knowledge and experience with Microsoft Office, Outlook, and Excel.
• Perform additional assignments and special projects as directed.

Basic Qualifications

• Candidates must be working towards a BS degree in Civil Engineering, Construction Management, or equivalent.
• Valid Driver’s License and ability to drive on behalf of company business.

Preferred Qualifications

• Experience with AutoCAD Civil 3D software.
• Experience with Primavera P6 scheduling software.
• Experience with Microsoft Project scheduling software.
• Experience with USACE QCS System.
• Experience with site surveying, both conventional and GPS.
• Assisting with the development of cost estimates and proposals.
• Prior project experience with In-Situ Stabilization.
• Prior experience with materials procurement and purchasing.

Preferred Competencies

• Must be self-motivated and interested in learning all aspects of environmental and geotechnical construction.
• Problem Solving & Risk Assessment: Evaluate risks and effectively resolve challenges, champion safety and deliver exceptional quality standards.
• Autonomy & Prioritization: Self-motivated, ability to work independently, prioritize and meet deadlines.

Physical Demands & Work Environment

This office and field hybrid role requires frequent computer use and effective communication. Site work may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Location: Donaldsville, LA

Position Summary
Operate a variety of off highway construction vehicles used in earth moving operations, including but not limited to: 
articulating trucks, rigid framed haul trucks, agricultural tractors, in a safe and efficient manner.

Forgen Overview
Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are 
dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by 
our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• Participate in a drug-free workplace with a random drug testing program.
• Responsible for driving a safety culture which promotes Incident and Injury Free Performance.
• Safely and efficiently operate off highway construction vehicles for dust control and dirt compaction.
• Transport soil and other material to appropriate location for stockpiling or disposal.
• Use hand-held mobile radio units to coordinate tasks and resources.
• Read and comply with safety plans, rules, maintenance instructions, training materials, Material Safety Data 
  Sheets (MSDS), warning tags, traffic signs and procedure manuals.
• Understands operational characteristics of a variety of off highway construction vehicles (including articulated 
  dump trucks).
• Ability to work extended hours, including evenings and weekends as required.
• Perform additional assignments and special projects as directed.

Basic Qualifications

• High school diploma/GED or equivalent.
• The following years of experience is required:
  • Truck driver 1: Two plus years of driving experience.
  • Truck driver 2: Five plus years of driving experience.
  • Truck driver 3: Ten plus years of driving experience.

Preferred Qualifications 

• The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary.
• 40 Hour HAZWOPER training.
• Competent Person Safety Training
• 8-Hour Supervisory Training
• 30-Hour OSHA Construction Safety Training
• First Aid and CPR

Physical Demands & Work Environment
This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, 
and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy 
machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a 
hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are 
essential.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional 
duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety 
risk.

Breeze is hiring- join us!

Breeze is looking for “Seriously Nice” Part Time Flight Attendants for our MSY Crew Base!

As one of our most highly visible Team Members, Flight Attendants are responsible for the safety and comfort of our Guests and fellow Team Members; we expect them to welcome and accommodate Guests, mitigate high-stress situations, collaborate and problem solve with other Team Members, use good judgement, and just be...nice. We will rely on you to act as the face the Company by embracing Breeze’s Five Core Values – Safety, Kindness, Integrity, Ingenuity, and Excellence.

Here’s what you’ll do

• Provide an exceptional Guest experience – warmly welcome Guests onto our aircraft, aide in seating assignments, luggage and garment stowage, or any additional information requested, while remaining present and available for further assistance
• Remain positive and be kind – our Guests should always feel valued and appreciated; be empathetic and act with humanity!
• Maintain a safe work environment for our Guests and Team Members
• Remain calm under pressure and mitigate high-stress situations
• Effectively communicate, collaborate, and show respect for other Team Members – we all perform our best when we work together!
• Stay approachable and accommodating by monitoring the cabin regularly
• Remain flexible - understand that schedules may change due to operational, weather-related, and other unforeseen delays
• Stay current and compliant with FAA regulations, company procedures, and training requirements
• Demonstrate personal responsibility – be punctual, timely, and proactive
• Uphold professional appearance and etiquette guidelines, both in and out of the cabin
• Willing to assist in other departments, if necessary
• Comfortable using, implementing, and explaining Breeze’s Inflight technology
• Prepare and serve meals, snacks, and beverages (including alcohol) while practicing highest hygiene standards
• Maintain cabin cleanliness and galley organizational standards, comfortable working in tight quarters
• Provide instruction, including emergency and evacuation procedures, to Guests
• Administer first-aid and medical care, if required, in the event of an emergency
• Capable of controlling personal and emotional responses and acting appropriately under high levels of stress
• Conduct security screenings 
• Complete Autism Awareness Training 
• Ability to adhere to FAA and DOT travel regulations
• Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence

Here’s what you need to be successful

Minimum Qualifications

• 21 years of age or older
• High school diploma or equivalent educational achievement
• Height Minimum - must be able to reach and remove emergency equipment from overhead bins without assistance
• Height Maximum – must be able to have adequate head clearance in the cabin
• Ability to sit and buckle into the E190 and A220 Flight Attendant jumpseat seatbelt harness and lap belt
• Neat, well-groomed, and capable of making a positive impression
• Must be service-oriented
• Adhere to highest possible hygiene standard as outlined by the CDC
• Ability to read, write, speak, and understand the English language; may be required to communicate safety instructions to Guests who may not speak English
• Ability to pass a vision and hearing test
• Ability to successfully complete security screening training
• Must pass a DOT pre-employment drug test
• Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check
• Legal right to work in the U.S.
• Legal right to travel without restriction to/from the United States
• Current Passport with a minimum of six (6) months remaining prior to expiration***
• Ability to serve alcoholic beverages
• Willing to relocate based on the company’s operational needs if applicable
• Able to work nights, weekends, holidays, and extended hours if needed
• Able to report for work in your assigned base for your assigned trips
• Able to work “Reserve Assignment” in your assigned base
• Self-starter, must have a positive attitude and strong desire for success
• Neat, well-groomed, and capable of making a positive impression.
• Nose piercings are acceptable and must follow our company guidelines: Studs only: Single 2mm or smaller nose stud is allowed.  Must be silver, gold or gemstone.  No hoops allowed. No other facial piercings are allowed.
• No teeth embellishments in uniform
• No more than two (2) earring per ear while in uniform

Note: Tattoos may be visible while in uniform if they are within our Company guidelines. Our company tattoo guidelines will be provided during the selection process.

***All Breeze Flight Attendants are required to have a current Passport, with a minimum of six (6) months remaining at the time of application***

Skills/Talents

• Ability to perform assigned duties, including standing for extended periods of time
• Ability to read announcements clearly and competently, give emergency commands and communicate in the English Language
• Ability to turn challenges into solutions or alternatives
• Ability to think independently while being a part of a collaborative team
• Ability to work independently as part of a team without direct supervision
• Physical abilities consistent with day-to-day operations and duties (e.g. lifting luggage, window exits, standard door operating procedures), including the ability to lift fifty (50) pounds
• Ability to close overhead storage compartments with a maximum push/pull force of approximately fifty (50) pounds
• Assist disabled passengers during the flight into and out of the Inflight wheelchair, then transporting them as needed
• Ability to push/pull beverage and food carts on wheels up and down inclines with maximum force of approximately sixty (60) pounds
• Ability to perform all safety-related procedures
• Exemplifies Breeze’s safety culture, values, and mission and be “Seriously Nice”!
• Excellent oral and written communication skills
• Excellent problem-solving skills
• Skilled in handling difficult situations, problem solving, complaint resolution and conflict de-escalation
• Ability to work with individuals and teams at all levels in the organization 

Perks of the Job

• 401K with Breeze Employee Match
• PTO
• Travel on Breeze and other Airlines too!