YOUR MISSION

Seeking an experienced Mission Manager to lead and coordinate the planning, integration, and execution of aerospace vehicle launches for defense and commercial space missions. The Mission Manager will be responsible for overseeing all aspects of the launch lifecycle, ensuring safe, efficient, and successful execution of space launch missions. This role requires strong technical knowledge of launch systems, leadership in multi-disciplinary teams, and the ability to interface with government and commercial stakeholders.

RESPONSIBILITIES

• Mission Planning & Coordination:
• Lead the planning and management of launch operations from mission concept through final execution.
• Define launch objectives and timelines in collaboration with program management, engineering, and mission partners.
• Develop detailed launch schedules, identifying critical milestones and key dependencies to ensure mission readiness.
• Serve as the primary point of contact for launch operations, coordinating with internal teams, government agencies, and commercial partners.
• Interface with subcontractors and mission partners to manage requirements, schedules, and technical deliverables.
• Launch Vehicle Integration:
• Oversee the integration of payloads with the launch vehicle, ensuring compatibility and compliance with mission requirements.
• Collaborate with engineering teams to resolve integration issues and ensure that both payload and vehicle systems meet performance and safety standards.
• Work closely with vehicle providers (e.g., ULA, SpaceX, Northrop Grumman) to manage launch site operations, technical reviews, and flight readiness certification.
• Identify, analyze, and manage technical, operational, and programmatic risks associated with the launch process.
• Develop and implement contingency plans and risk mitigation strategies to minimize potential impacts to the launch schedule and mission success.
• Conduct root cause analyses of any issues arising during the launch campaign and ensure corrective actions are taken.
• Regulatory Compliance & Safety:
• Ensure that all launch operations comply with U.S. government regulations, including FAA, DoD, and other relevant agencies.
• Maintain strict adherence to safety protocols and launch site procedures to ensure the safe execution of all pre-launch and launch activities.
• Lead pre-launch safety reviews and ensure compliance with environmental and range safety standards.

QUALIFICATIONS

• Education:
  • Bachelor's degree in Aerospace Engineering, Electrical Engineering, or related technical field (Master’s preferred).
• Experience:
  • 4+ years of experience in launch operations, aerospace systems engineering, or a related field.
  • Demonstrated experience in spacecraft development and launch, including planning, integration, testing, and execution of space or defense missions.
  • Strong knowledge of launch vehicles, propulsion systems, and ground systems, with a track record of successful mission execution.
• Technical Skills:
  • Expertise in launch vehicle integration, ground operations, and flight dynamics.
  • Familiarity with mission assurance processes and regulatory frameworks (e.g., FAA, DoD, Range Safety).
  • Experience with launch planning and scheduling tools and software (e.g., MS Project, Primavera, or custom tools).
• Security Clearance:
  • Must have or be able to obtain and maintain a TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Experience in classified or national security space launches.
• Familiarity with various launch providers (e.g., ULA, SpaceX) and their respective vehicles (e.g., Falcon 9, Atlas V, Delta IV).
• Experience with military or government launch operations (e.g., NRO, USAF).
• Active U.S. security clearance (TS/SCI preferred).

COMPENSATION

• Base Salary: $110,000-$165,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—successful candidates will be located near our Denver or Long Beach facilities. While we observe a hybrid work environment, some work must be done on site.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

• Support the development of web-based frontend space ground system software, including 2D and 3D interfaces, using React and TypeScript
• Contribute to team discussions on architecture, design, and code reviews
• Collaborate with cross-functional teams including space operators, designers, backend engineers, and astrodynamics algorithm engineers
• Take on well-scoped tasks and features with guidance from experienced engineers
• Write tests and follow established testing practices to maintain code quality

• Pursuing or recently completed a bachelor's degree in Computer Science or a related discipline
• Basic understanding of HTML/CSS and modern JavaScript or TypeScript
• Familiarity with React or similar modern frontend frameworks
• Basic understanding of how frontend applications communicate with backend services (e.g., REST APIs, WebSockets)
• Interest in building complex, data-rich user interfaces
• Comfort with Git and collaborative development workflows
• Strong written and oral communication skills and aptitude for working across disciplines
• Enjoys debugging and problem solving
• A strong bias towards understanding how things work rather than accepting the status quo

• Experience with React patterns including hooks, functional components, and component composition
• Exposure to testing frameworks such as Jest, Vitest, or React Testing Library
• Familiarity with component libraries, design systems, or tools like Storybook and Figma
• Exposure to Three.js, React Three Fiber, or other web-based 3D libraries
• Familiarity with CSS-in-JS, Tailwind, or other modern styling approaches
• Exposure to databases such as PostgreSQL or MySQL
• Interest in data visualization, real-time interfaces, or interactive 3D applications

COMPENSATION

• Base Salary: $28/hour 

This position will be open until it is successfully filled. To submit your application, please follow the directions below.

YOUR MISSION

The Senior Contracts Manager will serve as the company's first dedicated contracts hire and a key member of the Legal Department, personally managing U.S. Department of Defense contracts end to end—from proposal support through award, post-award performance, and closeout. Reporting to the General Counsel, this role will work closely with the proposal and business development team, program managers, and engineering to ensure contracts are properly structured, administered, and closed in compliance with applicable regulations and company policies.

This is a hands-on role in a small, growing legal department. You will carry your own portfolio of contracts from day one, operating with significant autonomy and serving as a direct point of contact with government Contracting Officers and Contracting Officer Representatives. The ideal candidate brings the judgment and initiative that come from working in a lean organization and operating with supervised independence.

Beyond individual contract management, a core part of this role is building a contracts team. Working in close partnership with the General Counsel, you will refine staffing needs, hire contract administrators, and stand up the processes and structure needed to scale the contracts function as the company grows. Until that team is in place—and whenever workload or availability requires it—you will be the contracts function, and the role is scoped with that expectation in mind. As the team and function grow, so will the scope and seniority of this role.

Responsibilities

Pre-Award

• Review and analyze RFPs, RFIs, draft solicitations, and other government procurement actions, identifying key terms, risks, and compliance requirements.
• Support proposal development, including preparation of representations and certifications, review of terms and conditions, and input on cost and pricing volumes from a contracts perspective.
• Advise the proposal and business development team on contract structure, risk, and strategy during the capture and proposal process, including educating business development personnel on the advantages, disadvantages, and risk profiles of different contract types (e.g., FFP, CPFF, CPAF, T&M, IDIQ) to support informed pursuit decisions.
• Identify and flag organizational conflicts of interest and other eligibility or compliance considerations during opportunity assessment.

Award and Negotiation

• Review and negotiate contract terms and FAR/DFARS clauses with government Contracting Officers.
• Coordinate internal review and approval of contract documents prior to execution.
• Ensure contracts are properly recorded, distributed, and set up for performance tracking.

Post-Award Administration

• Serve as the primary point of contact with government Contracting Officers and CORs for assigned contracts.
• Manage contract modifications, change orders, option exercises, incremental funding actions, and other post-award contract actions.
• Track and manage CDRLs, deliverable schedules, and other contractual performance obligations.
• Monitor contract performance for scope, funding, and schedule risks, including identification and escalation of issues such as scope creep, constructive changes, and unauthorized commitments.
• Prepare and submit contract correspondence, including cure notices, show cause responses, requests for equitable adjustment, and other formal communications.
• Support claims analysis, preparation, and resolution in coordination with attorneys within the Legal Department.
• Ensure appropriate FAR/DFARS flowdowns in subcontracts and supplier agreements.

Compliance and Audit Support

• Maintain contract files in audit-ready condition in accordance with applicable record retention requirements.
• Serve as the initial point of contact for routine DCAA and DCMA interactions, audits, and information requests.
• Support compliance with cost accounting standards, Truth in Negotiations Act requirements, and other regulatory obligations applicable to government contractors.
• Track and ensure timely completion of compliance-driven reporting and filing obligations tied to contract performance.

Closeout

• Manage contract closeout procedures, including final deliverable verification, property disposition, release of claims, deobligation of excess funds, and coordination with finance on final invoicing and reconciliation.

Team Building and Leadership

• Build, hire, and manage a contracts administration team in close partnership with the General Counsel, including defining roles, setting hiring priorities, and developing a staffing plan aligned with the company's program portfolio and growth trajectory.
• Serve as the day-to-day manager of contracts team members once hired, including workload allocation, mentorship, professional development, and performance management.
• Develop and implement onboarding processes, standard operating procedures, training materials, and playbooks that enable new contracts team members to operate effectively and consistently.
• Establish and maintain contracts administration workflows, systems, and reporting structures that scale with the team and the company.

General

• Maintain contract status reports, trackers, and dashboards to support leadership visibility and decision-making.
• Support continuous improvement of contracting processes, templates, and playbooks within the Legal Department.
• Build and maintain strong working relationships with internal stakeholders across programs, engineering, finance, and business development.
• Assist with additional projects and initiatives as needed under the direction of the General Counsel.

Qualifications

The successful candidate will be an experienced contracts professional who combines deep, hands-on DoW contract administration expertise with the judgment and leadership ability needed to build and manage a team. This person must be equally comfortable personally managing a portfolio of government contracts—including direct engagement with Contracting Officers—and standing up the processes, people, and structure needed to scale a contracts function. Strong interpersonal skills are essential: this role requires close collaboration with program managers, engineers, business development, finance, and legal colleagues, and the ability to translate complex contracting concepts into practical guidance for non-contracts stakeholders.

• Bachelor's degree required.
• 10+ years of experience in DoD contract administration, with direct responsibility for managing government contracts through the full acquisition lifecycle.
• Active U.S. security clearance required (Secret minimum).
• Demonstrated experience as a primary contracts point of contact with government Contracting Officers.
• Experience managing, mentoring, or building a contracts team, or demonstrated readiness to do so (e.g., training junior staff, leading contract administration workstreams, or standing up new processes in a growing organization).
• Strong working knowledge of the FAR, DFARS, and applicable agency-specific regulatory supplements.
• Experience with a range of government contract types, including firm-fixed-price, cost-plus-fixed-fee, cost-plus-award-fee, time-and-materials, and indefinite-delivery/indefinite-quantity contracts, and the ability to advise internal stakeholders on the practical implications of each.
• Experience supporting proposals and the pre-award process, including review of solicitations and preparation of representations and certifications.
• Experience with contract modifications, change orders, REAs, and contract closeout.
• Ability to work independently, exercise sound judgment, and communicate directly with government counterparts without close supervision.
• Strong written and verbal communication skills, with experience drafting formal contract correspondence.
• Proficiency with contract management systems and tools, SAM.gov, and Microsoft Office.

Preferred Qualifications

• Experience at an aerospace and/or defense company is strongly preferred.
• Experience in a small company, startup, or high-growth environment.
• NCMA certification (CPCM, CFCM, or CCCM).
• Experience supporting programs involving classified information.
• Familiarity with DCAA and DCMA audit and oversight processes.
• Experience with subcontract administration, including flowdown negotiation and compliance.

Compensation

• Base Salary: $145,000-$245,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

YOUR MISSION

AI-assisted work is the biggest force multiplier available to a company at True Anomaly's stage. It accelerates how we build, how we deliver, and how we scale. We are investing in AI as a core operating capability, not a side experiment, and this role exists to help make that investment real. 

As a Senior AI Platform Engineer, you will build the infrastructure, tooling, and integrations that put AI directly into the hands and workflows of every team across the company. This is not a research role. It is a building role. You will ship capabilities that engineers, program managers, operators, and business teams use every day to move faster and produce better work. 

The scope is broad by design. You may be standing up on-premises GPU infrastructure one week, building connectors between AI models and internal systems the next, and developing a custom application for a specific business workflow after that. You will contribute to platform-level technical decisions about AI providers, tools, and architectures. You will also help build and deliver AI training and enablement for the company, including office hours, brown bags, and hands-on resources. 

This role reports to the Chief Security Officer and works across every function. You will have meaningful autonomy, direct visibility to executive leadership, and the opportunity to shape how a fast-growing defense technology company operates with AI. 

RESPONSIBILITIES

• Build and maintain AI platform infrastructure: API integrations, model access pipelines, system connectors (MCP, tool use), and on-premises compute environments as needed 
• Develop custom AI-powered applications, workflows, and integrations that connect frontier models to internal systems such as project management, documentation, communications, and operational tools 
• Contribute to technical evaluation and selection of AI providers, tools, and platforms, helping inform build-vs-buy decisions based on capability, compliance requirements, and speed to value 
• Help design and deliver AI training and enablement programs for the company, including hands-on workshops, office hours, documentation, and shared resources that build real fluency across teams 
• Partner with engineering, security, and IT teams to ensure AI deployments meet government security and compliance requirements across data classification levels 
• Stay current with the rapidly evolving AI landscape and surface new models, tools, and capabilities that could accelerate the company 

QUALIFICATIONS

• Software engineering background with experience building and shipping production systems, ideally in Python, TypeScript, or similar languages common in AI/ML tooling 
• Hands-on experience with large language model APIs, including prompt engineering, tool use, retrieval-augmented generation (RAG), or agent frameworks 
• Experience building integrations between software systems using APIs, webhooks, data pipelines, or authentication flows 
• Ability to work across a broad technical surface area, moving between infrastructure, application development, and platform work as priorities require 
• Good communication skills and ability to explain technical AI concepts to non-technical audiences through training, documentation, or direct support 
• Comfortable operating with autonomy in a fast-paced environment where priorities shift and the playbook is being written in real time 
• Ability to maintain or obtain TS//SCI clearance 

PREFERRED SKILLS AND EXPERIENCE

• Experience deploying AI or ML systems in government, defense, or regulated environments with security and compliance constraints 
• Familiarity with government cloud environments (AWS GovCloud, Azure Government) and authorization frameworks (FedRAMP, IL4/IL5) 
• Experience with on-premises GPU infrastructure (NVIDIA, CUDA) for model hosting or fine-tuning 
• Background in developer tooling, platform engineering, or internal tools teams at high-growth technology companies 
• Experience building knowledge retrieval systems, embedding pipelines, or enterprise search infrastructure 
• Currently hold or have previously held a U.S. security clearance at any level 

COMPENSATION

• Base Salary: $170,000-$275,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—while we observe a hybrid work environment, you will need to be onsite as the business needs require. On an average week, you can expect to spend at least 3 days per week in office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Hybrid

YOUR MISSION 

True Anomaly is becoming an AI-first company. Every function, from engineering to manufacturing to business operations, is expected to work with AI as a core part of their workflow. There is no AI engineering team today, no internal model hosting infrastructure, and no agent platform. As Senior Manager of AI Engineering, you will build all of it. You will own the AI platform: model hosting, agent frameworks, enterprise AI tooling, and the infrastructure that connects AI capabilities to the systems where work happens. You will also own AI enablement across the company, embedding with teams to identify high-value use cases and deploying the tools and patterns that make adoption stick. This is a player-coach role with full executive sponsorship. You will be making architecture decisions and shipping code on day one while building a team of 8 engineers around you. 

RESPONSIBILITIES 

• Build and lead the AI Engineering team from zero: 8 engineers spanning AI platform, AI infrastructure, and enterprise AI tooling, with an emphasis on recruiting people who can ship in ambiguous environments with minimal direction 

• Own the AI platform architecture: model hosting (cloud and on-premises GPU compute), agent frameworks, API gateways, and the platform layer that connects AI capabilities to the tools and systems where work happens 

• Build and deploy enterprise AI tooling across the company: knowledge platforms (Glean or equivalent), coding assistants, MCP connectors, and AI-powered workflows embedded in collaboration and engineering tools 

• Design and build the agent infrastructure that moves the company from standalone AI tools to embedded and autonomous AI: agents that monitor, analyze, recommend, and act within company systems with appropriate human oversight 

• Drive AI enablement across the organization: training, embedding with teams, supporting a distributed champion model, and building the reusable patterns and documentation that make adoption self-sustaining 

• Partner with Data Engineering (critical-path dependency for the AI platform), Infrastructure Engineering (compute and networking), and Cybersecurity (compliance and data handling) to deliver a platform that is secure, scalable, and production-ready 

QUALIFICATIONS 

• 8+ years of experience in software engineering, ML engineering, or AI infrastructure, with 3+ years building and leading engineering teams 

• Hands-on experience building AI/ML infrastructure: model serving, GPU compute management, inference pipelines, and the platform layer that production AI systems run on 

• Experience building agent systems or AI-powered automation that interacts with external systems via APIs, manages state, and operates with appropriate human oversight 

• Track record of hiring and developing high-performing engineering teams in fast-paced environments 

• Strong understanding of current AI tooling: frontier models, enterprise AI platforms, coding assistants, knowledge systems, and how they fit together in a production environment 

• Ability to work across technical and non-technical stakeholders to identify AI use cases, set priorities, and deliver capabilities that people actually adopt 

PREFERRED SKILLS AND EXPERIENCE 

• Experience deploying AI systems in defense, government, or regulated environments with data handling requirements (CUI, ITAR, FedRAMP, or DoD Impact Levels) 

• Background with enterprise AI platforms (Anthropic Claude, OpenAI, Google Gemini) including API management, rate limiting, cost controls, and multi-provider strategies 

• Experience with on-premises GPU infrastructure for model hosting and inference where cloud-only is not an option 

• Familiarity with knowledge management platforms (Glean or similar) and experience connecting them to enterprise data sources 

• Prior experience driving AI adoption at a company where AI fluency was treated as an organizational competency, not just an engineering initiative 

• Active U.S. security clearance at any level 

COMPENSATION  

• Base Salary:  Long Beach - $165,000 to $230,000, Denver - $160,000 to $220,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education and experience. 

ADDITIONAL REQUIREMENTS 

• U.S. citizenship required; clearance eligibility required; active clearance at any level preferred 

• Work Location: this role will be fully onsite at our facilities in Centennial, CO or Long Beach, CA  

• Work environment is in a standard office, working at a desk or in a production factory. 

• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs. 

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (IT 

1. AR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. 

We value diversity of experience, knowledge, backgrounds and perspectives and harness these qualities to create extraordinary impact. True Anomaly is committed to equal employment opportunity regardless of sex, race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, pregnancy, maternity or related condition (including breastfeeding) or any other basis as protected by applicable law. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know. 

YOUR MISSION

AI-assisted work is the biggest force multiplier available to a company at True Anomaly's stage. It accelerates how we build, how we deliver, and how we scale. We are investing in AI as a core operating capability, not a side experiment, and this role exists to make that investment real. 

As a Staff AI Platform Engineer, you will be one of the first hires to build the infrastructure, tooling, and integrations that put AI directly into the hands and workflows of every team across the company. This is not a research role. It is a building role. You will ship capabilities that engineers, program managers, operators, and business teams use every day to move faster and produce better work. 

The scope is broad by design. You may be standing up on-premises GPU infrastructure one week, building connectors between AI models and internal systems the next, and developing a custom application for a specific business workflow after that. You will make platform-level technical decisions about which AI providers, tools, and architectures to adopt. You will also own AI training and enablement for the company, running office hours, brown bags, and building the resources that help people get real value from these tools. 

This role reports to the Chief Security Officer and works across every function. You will have significant autonomy, direct access to executive leadership, and the opportunity to define how a fast-growing defense technology company operates with AI. 

RESPONSIBILITIES

• Build and maintain AI platform infrastructure: API integrations, model access pipelines, system connectors (MCP, tool use), and on-premises compute environments as needed 
• Develop custom AI-powered applications, workflows, and integrations that connect frontier models to internal systems such as project management, documentation, communications, and operational tools 
• Own technical evaluation and selection of AI providers, tools, and platforms, making build-vs-buy decisions based on capability, compliance requirements, and speed to value 
• Design and deliver AI training and enablement programs for the company, including hands-on workshops, office hours, documentation, and shared resources that help teams build real fluency 
• Partner with engineering, security, and IT teams to ensure AI deployments meet government security and compliance requirements across data classification levels 
• Stay current with the rapidly evolving AI landscape and bring informed recommendations on new models, tools, and capabilities that could accelerate the company 

QUALIFICATIONS

• Strong software engineering background with experience building and shipping production systems, ideally in Python, TypeScript, or similar languages common in AI/ML tooling 
• Hands-on experience with large language model APIs, including prompt engineering, tool use, retrieval-augmented generation (RAG), and agent frameworks 
• Experience building integrations between AI systems and enterprise platforms (APIs, webhooks, data pipelines, authentication flows) 
• Demonstrated ability to work across a broad technical surface area, context-switching between infrastructure, application development, and platform architecture 
• Strong communication skills and ability to translate technical AI concepts for non-technical audiences through training, documentation, and direct support 
• Self-directed and comfortable operating with high autonomy in a fast-paced environment where priorities shift and the playbook is being written in real time 
• Ability to maintain or obtain TS//SCI clearance 

PREFERRED SKILLS AND EXPERIENCE

• Experience deploying AI or ML systems in government, defense, or regulated environments with security and compliance constraints 
• Familiarity with government cloud environments (AWS GovCloud, Azure Government) and authorization frameworks (FedRAMP, IL4/IL5) 
• Experience with on-premises GPU infrastructure (NVIDIA, CUDA) for model hosting or fine-tuning 
• Background in developer tooling, platform engineering, or internal tools teams at high-growth technology companies 
• Experience building knowledge retrieval systems, embedding pipelines, or enterprise search infrastructure 
• Currently hold or have previously held a U.S. security clearance at any level 

COMPENSATION

• Base Salary: $200,000 - $330,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—while we observe a hybrid work environment, you will need to be onsite as the business needs require. On an average week, you can expect to spend at least 3 days per week in office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Hybrid

OUR MISSION 

The peaceful use of space is essential for continued prosperity on Earth—from communications and finance to navigation and logistics. True Anomaly builds innovative technology at the intersection of spacecraft, software, and AI to enhance the capabilities of the U.S., its allies, and commercial partners. We safeguard global security by ensuring space access and sustainability for all. 

OUR VALUES 

Be the Offset.  We create asymmetric advantages with creativity and ingenuity 

What would it take?  We challenge assumptions to deliver ambitious results 

It’s the People. Our team is our competitive advantage, and we are better together 

YOUR MISSION 

True Anomaly operates across Azure, AWS, their GovCloud variants, on-premises facilities, classified environments, and customer-deployed infrastructure. As Senior Manager of Infrastructure Engineering, you will own the compute platform that ties all of it together: Kubernetes, networking, CI/CD, cloud infrastructure, and the government-accredited environments that the company deploys into. Your team will grow initially to 6 then further as the company breaks out dedicated subteams for SRE, network engineering, developer productivity, and incident management. The infrastructure you build will serve every program in the company, directly displace subcontractor engagements that currently cost millions per program, and form the foundation of True Anomaly’s accredited compute platform. This role requires someone who can operate across the full breadth of infrastructure disciplines, make sound architectural calls in classified and unclassified environments, and build a team that scales with an aggressive growth trajectory. 

RESPONSIBILITIES 

• Build and lead the Infrastructure Engineering team: initially 3 Senior Engineers (Kubernetes/platform reliability, networking, CI/CD/cloud), growing into dedicated subteams as the organization scales 

• Own the compute platform strategy across commercial, CUI, and classified environments, delivering standardized infrastructure that any program can deploy onto instead of building from scratch 

• Deliver government-accredited compute environments (IL-5, IL-6) using internal engineering capacity, replacing the current model of outsourcing each new accredited environment to subcontractors 

• Drive Kubernetes standardization, multi-tenant cluster design, service mesh, and workload orchestration across the company’s multi-cloud and on-premises footprint 

• Partner closely with the Staff/Principal Platform Engineer and Staff/Principal Network Engineer (who report to the VP) as the senior technical anchors for compute and networking architecture 

• Collaborate with Cybersecurity on hardened infrastructure (STIGs, security scanning, network segmentation) and with AI and Data Engineering on the compute and networking layer their platforms run on 

QUALIFICATIONS 

• 10+ years of experience in infrastructure, platform, or systems engineering, with 3+ years leading infrastructure teams across multiple technical disciplines 
• Active U.S. security clearance, such as Secret, Top Secret or TS/SCI clearance 

• Deep hands-on expertise in Kubernetes, container orchestration, and cloud infrastructure (AWS, Azure, or GovCloud variants) at production scale 

• Working knowledge of networking across complex environments: multi-cloud, on-premises, VPNs, firewalls, and network segmentation across classification boundaries 

• Direct experience building or operating DoD accredited environments (IL-4/IL-5 or higher), with familiarity with NIST 800-53, STIGs, RMF, and the ATO process 

• Experience with CI/CD platform design and infrastructure-as-code practices at scale (Terraform, Ansible, or similar) 

• Track record of building and leading engineering teams in high-growth environments where the infrastructure had to scale faster than the headcount 

PREFERRED SKILLS AND EXPERIENCE 

• Experience in aerospace, defense, or national security technology companies where infrastructure spans classification levels 

• Background managing teams that operate across both unclassified and classified environments with mixed clearance requirements 

• Experience with service mesh (Istio, Linkerd), GitOps workflows, and developer platform tooling 

• Prior experience at a high-growth company where a single infrastructure team covered multiple disciplines before specializing into subteams 
• Familiarity with platform engineering “paved roads” operating models that balance standardization with engineering team autonomy 

COMPENSATION  

• Base Salary:   Long Beach - $165,000 to $230,000, Denver - $160,000 to $220,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education and experience. 

ADDITIONAL REQUIREMENTS 

• Active U.S. Secret clearance required; Top Secret preferred; must be able to obtain TS/SCI 

• Work Location: this role will be fully onsite at our facilities in Centennial, CO or Long Beach, CA  

• Work environment is in a standard office, working at a desk or in a production factory. 

• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs. 

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (IT 

1. AR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. 

We value diversity of experience, knowledge, backgrounds and perspectives and harness these qualities to create extraordinary impact. True Anomaly is committed to equal employment opportunity regardless of sex, race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, pregnancy, maternity or related condition (including breastfeeding) or any other basis as protected by applicable law. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know. 

YOUR MISSION 

The Corporate Paralegal will support the Legal Department, providing comprehensive paralegal, regulatory, and legal operations support across all legal functions. Reporting directly to the Head of Corporate Legal, this role will support all attorneys within the department and serve as the department’s primary owner of legal administration, governance, regulatory filings, and legal operations systems. 

This position is ideal for a highly organized professional who is comfortable operating independently, managing compliance-driven workstreams and multiple competing priorities, supporting a mix of contract types, and serving as the connective tissue across contracts, corporate governance, compliance, and legal operations in a fast-paced, collaborative environment. 

 Responsibilities

• Draft, revise, format, and proof legal documents, including contracts, subcontracts, amendments, NDAs, teaming agreements, correspondence, and internal memoranda.
• Incorporate attorney comments, manage redlines, and maintain document version control.
• Coordinate execution logistics, including signature routing, notarization, and record retention.
• Schedule and support legal meetings, including preparation of agendas, materials, and follow-up actions.
• Prepare and file corporate annual reports, PAC filings, and other required federal, state, and local regulatory filings applicable to government contractors.
• Maintain calendars and trackers for regulatory and compliance deadlines.
• Manage entity registrations, good standing certificates, and annual filings across jurisdictions.
• Serve as primary administrator for contract lifecycle management (CLM) and contract review platforms, including intake, workflow routing, user access, and reporting.
• Maintain and improve legal department process documentation, checklists, and playbooks.
• Track legal metrics related to contracts, compliance, and workload to support leadership reporting.
• Support onboarding of new legal team members and coordination with outside counsel.
• Help develop internal reference materials and training aids for contracting and compliance processes.
• Assist with special projects, ad hoc initiatives, and maintenance of other legal documentation as needed and under attorney direction. 

Qualifications 

• Associate’s or Bachelor’s degree required; paralegal certificate preferred.
• 5-11 years of experience as a corporate or government contracting paralegal, preferably in an in-house environment.
• Experience supporting government contracts, subcontracts, or regulated industries.
• Familiarity with FAR/DFARS structure, government contractor compliance requirements, and audit support is strongly preferred.
• Experience with corporate annual reports and entity management. Additional experience with PAC filings a plus.
• Experience supporting commercial vendor and supplier contracts.
• Proficiency with CLM systems, document management platforms, and legal technology tools.
• Strong working knowledge of Microsoft Office and document comparison/redlining tools. 

Compensation

• Base Salary: $90,000-$130,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave  

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

#LI-Onsite #LI-Remote #LI-Hybrid

YOUR MISSION

True Anomaly is seeking a talented and driven Electrical Engineer II to support the rapid design, development, and testing of high-reliability electrical systems for our spacecraft programs. In this role, you will execute across the full hardware development lifecycle — from requirements capture and schematic design through bring-up, integration, and production — while collaborating closely with cross-functional engineering teams. You will bring hands-on technical depth, a strong sense of ownership, and the initiative to contribute meaningfully from day one. 

RESPONSIBILITIES

• Execute requirements capture, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test for electrical designs 
• Support the rapid design, development, and testing of high-reliability electrical systems for spacecraft engineering and development efforts 
• Collaborate with system architecture development across cross-functional teams 
• Participate in preliminary and critical design reviews to support program requirements 
• Conduct derating analysis and worst-case circuit analysis 
• Support system-level integration of electrical subsystems, including hardware and software interfaces 
• Perform first article testing, unit-level testing, and production testing 
• Contribute to the development and execution of validation and qualification testing campaigns to ensure reliable hardware 
• Develop and maintain documentation for electrical systems and components, including design specifications, test plans, and operating procedures 
• Support hardware through production, integration, and launch 
• Collaborate with experts from other teams and departments to improve system efficiency, manufacturability, and reliability, and to ensure compliance with relevant industry standards and quality assurance processes 
• Contribute to continuous improvement of electrical engineering processes and practices 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field 
• 2-4 years of professional experience in electrical engineering 
• Proficiency with PCB design in Altium Designer or equivalent 
• Solid understanding of applicable codes and standards including PCB and PCBA design 
• Strong written and verbal communication skills 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or related field 
• Experience with spacecraft electrical system design and testing 
• Familiarity with spacecraft power systems, avionics, and communication subsystems 
• Knowledge of industry standards and regulations related to spacecraft electrical systems 
• Embedded firmware development experience 
• Experience with simulation tools such as SPICE, MATLAB, and Simulink 
• Knowledge of IPC standards and specifications including IPC-610, IPC J-STD-001, and other relevant PCB design and assembly standards 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $90,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION 

True Anomaly is building a new Platform Engineering organization to own the compute infrastructure that powers everything we do, from autonomous spacecraft to classified command-and-control software. As VP of Platform Engineering, you will build this organization from day one. You will hire and lead teams across AI engineering, data engineering, infrastructure engineering, and IT. You will set the technical vision for how the company builds, deploys, and operates across commercial, CUI, and classified environments. The platforms your team creates will serve every program in the company and position True Anomaly to offer accredited compute as a strategic capability in the defense market. This role has direct impact on the company’s ability to scale.  

RESPONSIBILITIES 

• Build and lead the Platform Engineering organization from the ground up: hiring managers, setting technical direction, and scaling a team to 24+ in 2026 with significant continued growth as the company expands its program portfolio and prime capabilities 
• Own the company’s compute infrastructure platform strategy across commercial, CUI, and classified environments, including cloud, containers, networking, and CI/CD 
• Define and deliver the technical architecture for DoD Impact Level 5 and IL-6 accredited compute environments, replacing subcontractor dependency with a reusable, internally owned platform 
• Drive AI enablement infrastructure as the company’s top strategic priority, including the AI platform, data infrastructure, and enterprise AI tooling that the rest of the company depends on 
• Lead the Systems Working Group: technology evaluation, approval, and standardization across the company, backed by the engineering capacity to drive outcomes 
• Partner with engineering leadership, program teams, and government customers to ensure infrastructure scales with the contract pipeline and positions True Anomaly to offer accredited compute as a prime capability 

QUALIFICATIONS 

• 12+ years of experience in infrastructure, platform, or systems engineering, with 5+ years leading engineering organizations of 15+ people across multiple technical disciplines 
• Hands-on expertise in cloud infrastructure (AWS, Azure, or GovCloud variants), Kubernetes, container orchestration, networking, and CI/CD at scale 
• Direct experience building and operating DoD Impact Level 5 or higher accredited environments, with working knowledge of NIST 800-53, STIGs, RMF, and the ATO process 
• Track record of building engineering organizations from scratch in high-growth environments: recruiting teams, establishing culture, and delivering platforms that other teams depend on 
• Experience managing teams that operate across classification levels with mixed clearance requirements 
• Strong executive communication skills and the ability to represent infrastructure strategy to government customers, program leadership, and C-suite stakeholders 

PREFERRED SKILLS AND EXPERIENCE 

• Experience in aerospace, defense, or national security technology companies 
• Background spanning multiple infrastructure disciplines: AI/ML platforms, data engineering, networking, and SRE/DevOps 
• Experience with multi-cloud and hybrid architectures including on-premises, GovCloud, and customer-deployed or disconnected environments 
• Prior experience at a high-growth startup (Series B through IPO) building infrastructure that scales with rapid headcount and contract growth 
• Familiarity with platform engineering “paved roads” operating models that balance standardization with engineering team autonomy 
• Active U.S. Top Secret or TS/SCI clearance 

COMPENSATION  

• Base Salary:  $185,000 - $350,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education and experience. 

ADDITIONAL REQUIREMENTS 

• Active U.S. Top Secret clearance required; SCI eligibility required and must be obtainable 
• Work Location: this role will be fully onsite at our facilities in Centennial, CO or Long Beach, CA  
• Work environment is in a standard office, working at a desk or in a production factory.  

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for a technician to build our new generation of Spacecraft. In this role you will work all aspects of the Spacecraft build, factory setup and operations.  

RESPONSIBILITIES

• Assemble and test Spacecraft harnesses per engineering drawings and direction. 
• Assist with the setup and execution of Thermal Vacuum chambers and vibe facilities. 
• Ensure processes and cleanroom protocols are followed by all personnel.  
• Own the product build from piece parts to full assemblies. 
• Execute anomaly dispositions from engineering. 

QUALIFICATIONS

• Technical degree or certification in relevant field 
• 2+ years of professional experience in spacecraft or space products assembly 
• Demonstrated excellence in assembly and integration 
• Proficiency in reading drawings, process sheets, instructions 
• Experience with ESD, FOD, cleanroom operations 
• Experience with spacecraft harness fabrication, rework and installation 
• Passion for the space industry 
• Demonstrated ability to work in a multidisciplinary team 
• Demonstrated ability to work autonomously with little input on requirements or management oversight 
• Excellent written and verbal communication skills 
• Experience with torquing, staking 
• Ability to lift 25 lbs and work in a cleanroom environment 

COMPENSATION

• Base Salary: $30-70/hr
  • This position is non-exempt and is eligible for overtime.
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for a technician to build our new generation of Spacecraft. In this role you will work all aspects of the Spacecraft build, factory setup and operations.  

RESPONSIBILITIES

• Assemble and test Spacecraft harnesses per engineering drawings and direction. 
• Assist with the setup and execution of Thermal Vacuum chambers and vibe facilities. 
• Ensure processes and cleanroom protocols are followed by all personnel.  
• Own the product build from piece parts to full assemblies. 
• Execute anomaly dispositions from engineering. 

QUALIFICATIONS

• Technical degree or certification in relevant field 
• 2+ years of professional experience in spacecraft or space products assembly 
• Demonstrated excellence in assembly and integration 
• Proficiency in reading drawings, process sheets, instructions 
• Experience with ESD, FOD, cleanroom operations 
• Experience with spacecraft harness fabrication, rework and installation 
• Passion for the space industry 
• Demonstrated ability to work in a multidisciplinary team 
• Demonstrated ability to work autonomously with little input on requirements or management oversight 
• Excellent written and verbal communication skills 
• Experience with torquing, staking 
• Ability to lift 25 lbs and work in a cleanroom environment 

COMPENSATION

• Base Salary:  
  • Level 1: $33 - $40/hr
  • Level 2: $38-$60/hr
  • *this position is non-exempt and is eligible for overtime 
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

We are seeking a highly motivated Senior Test Engineer to support the design, planning, and execution of test campaigns for aerospace defense systems. You will work closely with engineers, program managers, and technical teams to ensure that systems meet performance, environmental, and mission-critical requirements. In this role, you will develop test plans, execute tests, collect data, analyze results, and ensure that the systems meet all specifications. The position offers an excellent opportunity to contribute to cutting-edge aerospace technologies in a fast-paced, mission-driven environment.

RESPONSIBILITIES

• Define and lead test strategies for major programs, including requirements verification, procedure development, and execution oversight. 
• Author and review high-level test documentation including plans, procedures, readiness reports, and compliance matrices. 
• Analyze complex test data, resolve anomalies, and lead root cause investigations and corrective actions. 
• Oversee test campaigns involving multiple disciplines (thermal, structural, EMI, functional) and ensure full traceability to system requirements. 
• Mentor junior engineers and serve as the technical point of contact for internal and external test-related communications. 
• Interface with program leadership, customers, and regulatory bodies during design reviews and formal test events. 
• Ensure compliance with industry and military standards for test planning and reporting. 

QUALIFICATIONS

• Bachelor’s degree in engineering. 
• 5+ years of relevant experience in test engineering for aerospace, defense, or high-reliability systems. 
• Deep knowledge of environmental and performance test methodologies and standards. 
• Experience leading complex test campaigns and multidisciplinary teams. 
• Strong background in data analysis, systems engineering, and failure analysis. 
• Excellent communication, leadership, and technical documentation skills. 
• U.S. Citizenship required due to government contracts. 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in engineering.
• Familiarity with systems engineering principles and test validation traceability. 
• Expertise with data acquisition, test automation, and scripting (LabVIEW, Python, MATLAB). 
• Knowledge of test standards such as MIL-STD-810, DO-160, or NASA/DoD specs. 
• Experience working in classified or secure test environments. 
• Active Secret or Top Secret clearance. 

COMPENSATION

• Base Salary: $120,000-$195,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location— this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are revolutionizing spacecraft systems and are looking for a candidate with a passion for being hands-on and helping build new technologies. Our production engineers do what it takes to ensure production can keep building. You will gain experience at every phase of the spacecraft program including design, analysis, manufacturing, test, and flight. The company culture is one of innovation and speed, so if you are looking for a place that allows you to reach your full potential, this is the job to consider. 

RESPONSIBILITIES

• Generate work instructions for mechanical and electrical assemblies 
• Supporting production operations as needed to ensure workflow stays uninterrupted.
• Generate NCR’s (non-compliance reports), support investigation through resolution, and own the execution of dispositions.
• Manage calibration and certification of mechanical and electrical GSE (ground support equipment).
• Provide technical and engineering assistance to team of technicians. 
• Complete process improvements and corrective actions to increase efficiency of production. 
• Provide manufacturing expertise to design engineering and contribute to documentation such as drawings, SOPs (standard operating procedures), etc.
• Create spacecraft assembly kits for rapid production. 

QUALIFICATIONS

• Bachelor's degree in manufacturing, industrial, mechanical, electrical engineering or related field  
• 2-4 years of experience for a level II or 4+ years of experience for a level III 
• Experience with PLM, MES, configuration and data management controls and systems.
• Experience working to AS9100 process and standards.
• Experience with working hands-on-hardware and fabrication methods
• Experience building and producing classified hardware in SCIF’s or SAP facilities.  

PREFERRED SKILLS AND EXPERIENCE

• Experience building space hardware including, but not limited to, fluid systems, structures, harnessing, or PCBAs

COMPENSATION

• Base Salary: 
  • Level 2: $75,000 - $120,000
  • Level 3: $90,000-$155,000 
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Clearance — Ability to maintain or obtain TS/SCI clearance.
• Work Location — this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As Manager, Hardware and Environments Test Engineering, you will lead the Colorado -based team of hardware and environmental test engineers to deliver fully tested and qualified components, developmental units, and spacecraft on aggressive timelines. You will own the test processes, schedules, capacity planning, and the execution outcomes of hardware and environmental test.  

You will partner closely with Program Management and Engineering to provide inputs to program schedules, align capacity with demand, ensure design for test, and drive disciplined execution against test milestones. You will be accountable for adapting test to program needs, continuously improving efficiency, automation, and process maturity to deliver the required quality at the required time.  

This role requires both strategic foresight and hands-on leadership: setting standards, driving automation, solving problems, and developing people to their full potential while ensuring every spacecraft meets mission assurance standards. 

RESPONSIBILITIES

• Lead and mentor a high-performing team of test engineers providing distance, direction, and motivation to complete the mission, growing capacity within our most important asset: our people. 
• Manage the team and cross-team test coordination utilizing effective and efficient tools that reduce friction and fuel high-quality, high-rate output 
• Own execution of test to meet program commitments including testing component, subsystem, vehicle-level hardware, and environments for qualification and acceptance. 
• Drive load capacity planning: forecast demand, balance resources, maximize efficiency, and ensure teams are properly staffed and focused. 
• Provide accurate inputs to the Integrated Master Schedule (IMS), engineering reviews, and test reviews, aligning test activities with program needs. 
• Own and continuously improve test processes, ensuring efficiency, repeatability, and compliance. 
• Drive partnership with design teams to ensure high quality design that not only meets requirements, but can be tested to the qualification requirements of a program. 
• Champion efficiency and automation initiatives to reduce cycle time, improve first-time test success, and scale acceptance and qualification repeatability. 
• Ensure test facilities and workspaces are clean, organized, and optimized for safety and efficiency.  

WHAT SUCCESS LOOKS LIKE 

• Test schedules executed with milestones met and acceptance/qualification delivered at required quality. 
• Efficiency and automation efforts measurably reduce turn time and increase throughput each iteration. 
• Capacity plans that maximize utilization, minimize downtime, while preventing bottlenecks. 
• High first-time yield at quality with reduced anomalies demonstrate process maturity. 
• Team engagement and technical excellence known across the organization. 
• Test processes that are scalable, disciplined, and trusted by stakeholders.  

QUALIFICATIONS

• Bachelor’s degree in mechanical, aerospace engineering, or a related discipline. 
• First-principles driven approach to engineering and problem solving backed by ability to scale analytical rigor to meet program risk levels and maturity. 
• 5+ years of experience in space system, developmental system, or complex system test across electrical, mechanical, fluids, and environmental. Environmental test experience in thermal, vacuum, vibration, electromagnetic interference / electromagnetic compatibility environments. 
• Mastered use of test processes, tools, and practices including test plans, test equipment design, development, and implementation, and the integration of automation components across these systems. 
• Experience setting up test architecture in manufacturing and test execution system (epsilon 3 or equivalent)  
• Experience with space-grade and ESD sensitive component and assembly testing. 
• Demonstrated ability to effectively manage and maintain test equipment and facilities including environmental, structural or mechanical, fluids, and electrical test.  

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in mechanical, aerospace engineering or equivalent discipline. 
• Extensive experience with test ground support equipment and electrical ground support equipment design, development, and implementation in test. 
• Demonstrated ability to stand up spacecraft/component test and environmental test facilities including vibration, thermal, vacuum, EMI/EMC, fluids and pressure.  
• Active DoD clearance or ability to obtain one. 

COMPENSATION

• Base Salary:  $135,000 - $225,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Staff Electrical Engineer, you will be a senior technical leader responsible for driving avionics architecture decisions and owning the design, development, and delivery of flight-critical electronic assemblies for True Anomaly's spacecraft. You will shape how our avionics systems are defined, integrated, and proven — bridging board-level design with system-level thinking to deliver hardware that meets the demands of space. 

RESPONSIBILITIES

• Lead avionics architecture definition and trade studies, driving decisions on processing, data transport, power distribution, and redundancy that shape the spacecraft electrical system 
• Own the end-to-end design of complex electronic assemblies — from requirements capture, schematic design, and component selection through prototyping, bring-up, debugging, and release to production 
• Collaborate with system architecture development across cross-functional teams including software, GNC, propulsion, and systems engineering 
• Lead preliminary and critical design reviews for avionics subsystems, ensuring designs meet program requirements and spacecraft-level performance goals 
• Conduct and review derating analysis and worst-case circuit analysis for flight hardware 
• Define and drive interface control between avionics boards and other spacecraft subsystems, including power, RF, payloads, and harness 
• Perform system-level integration of avionics hardware and software, including embedded firmware interfaces and communication buses 
• Perform first article testing, unit-level testing, and production testing of avionics assemblies 
• Support hardware through production, integration, launch, and on-orbit commissioning 
• Define validation approaches and create development and qualification testing campaigns to exercise designs to their limits and ensure reliable hardware 
• Drive compliance with relevant industry standards, regulations, and quality assurance processes across the avionics subsystem 
• Develop and maintain documentation for avionics systems and components, including design specifications, interface control documents, test plans, and operating procedures 
• Mentor junior engineers to improve design skill sets and increase capabilities within the organization 
• Continuously improve electrical engineering processes and practices to drive innovation and efficiency 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering or related field 
• Minimum 10 years of experience in electrical engineering 
• Demonstrated spacecraft flight heritage — experience designing, building, and delivering electronic hardware that has operated on orbit 
• Experience with embedded firmware development and hardware/firmware co-design 
• Advanced experience in PCB and PCBA design using Altium Designer or equivalent ECAD tools 
• Experience with system-level avionics architecture, including processing, power distribution, data interfaces, and redundancy schemes 
• Strong understanding of common spacecraft communication interfaces (RS-422/RS-485, SPI, I2C, SpaceWire, Ethernet) 
• Demonstrated ability to independently lead complex technical efforts and drive them to completion 
• Excellent communication and interpersonal skills 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Electrical Engineering or related field 
• Experience with FPGA SoC development and VHDL/Verilog 
• Familiarity with spacecraft power systems, propulsion interfaces, and communication subsystems 
• Experience with radiation-tolerant design practices and mitigation of radiation effects on COTS components 
• Knowledge of industry standards and regulations related to spacecraft electrical systems, including EEE-INST-002, GSFC-STD-7000 (GEVS), and MIL-STD-461 
• Experience with simulation tools such as SPICE, MATLAB, and Simulink 
• Experience with worst-case circuit analysis and derating analysis for space-grade hardware 
• Familiarity with configuration management and requirements traceability tools 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $175,000-$265,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

True Anomaly is seeking a talented and experienced Senior Electrical Engineer, Imager to join our Payloads team, reporting to the Electro-Optical Systems Engineering Manager. In this role, you will be the technical authority for the camera, focal plane, and sensing element design of our EO/IR imaging systems, spanning visible, near-IR, and infrared wavelength bands. You will own the full signal chain from photon collection through detector readout, data transfer, and electrical design — ensuring our imaging payloads deliver the performance, reliability, and affordability needed for operational spacecraft. You bring deep hands-on expertise in focal plane array technologies, detector electronics, and imaging system characterization, and you thrive in a fast-paced environment where you can take ownership and drive results from concept to on-orbit operation. 

RESPONSIBILITIES

• Lead the design, development, integration, and testing of camera systems and focal plane assemblies for visible, near-IR, and infrared imaging payloads 
• Own the electrical design of detector readout electronics, focal plane interface circuits, and associated analog and digital signal chains 
• Define and execute detector and focal plane characterization campaigns, including noise, responsivity, linearity, and dark current measurements 
• Design and optimize high-speed data transfer architectures from focal plane to downstream processing and storage 
• Develop and maintain image data management approaches, including on-board image storage, buffering, and downlink prioritization 
• Perform radiometric and electro-optical system modeling to predict and validate on-orbit imaging performance 
• Collaborate with optical, mechanical, and systems engineering teams to ensure seamless payload integration and performance compliance 
• Support integration and test activities, including environmental testing, calibration, and on-orbit commissioning 
• Develop and maintain documentation including design specifications, test plans, analysis reports, and operating procedures 
• Contribute to continuous improvement of EO engineering processes and practices 

QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Optical Engineering, Physics, or related field (Master's preferred) 
• 5+ years of professional experience in electro-optical system design with a focus on cameras, focal plane arrays, and detector electronics 
• Hands-on experience with visible, near-IR, and/or IR detector technologies (CCD, CMOS, InGaAs, MCT, or similar) 
• Experience with focal plane readout electronics, detector interface design, and analog signal chain development 
• Experience with high-speed digital data interfaces and image data transfer architectures 
• Strong understanding of radiometric analysis and electro-optical system performance modeling 
• Familiarity with SWaPC-constrained payload design for spacecraft applications 
• Excellent written and verbal communication skills 

PREFERRED SKILLS AND EXPERIENCE

• Experience with embedded firmware development for camera and focal plane control electronics 
• Experience developing test software for EO system characterization and validation 
• Familiarity with on-board memory management and image storage architectures 
• Experience with hyperspectral imaging sensor design, calibration, and data processing 
• Familiarity with space-qualified or radiation-tolerant detector and focal plane technologies 
• Experience with cryogenic or thermoelectric cooling systems for IR detector applications 
• Experience working in a fast-paced, startup environment or a similarly dynamic setting 

COMPENSATION

• Base Salary: $150,000-$220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance 
• Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

As a Mechanical Engineer at True Anomaly, you will be at the forefront of designing and developing the next generation of spacecraft that define the future of space security and sustainability. From LEO/GEO satellites to small sat platforms and on-orbit servicing vehicles, you will own the mechanical design of flight systems that operate in some of the most demanding environments known to engineering. This is a rare opportunity to shape vehicle architecture from the ground up — translating mission requirements into flight-ready hardware that safeguards access to space for the U.S. and its allies.

RESPONSIBILITIES

• Lead the design, analysis, and optimization of mechanical structures, mechanisms, and assemblies for LEO/GEO satellites, small sat platforms, and on-orbit servicing vehicles, ensuring designs meet performance, mass, and reliability requirements across the full hardware lifecycle.
• Own end-to-end development of spacecraft structural systems and mechanisms — from concept and trade studies through prototyping, qualification, and flight hardware delivery.
• Design and develop primary and secondary structures sized for launch load environments, including sine burst, random vibration, and shock, in compliance with launch vehicle ICD requirements.
• Lead the design of spacecraft mechanisms and deployment systems, including hinges, hold-down and release mechanisms, solar array drives, antenna pointing systems, and other precision moving assemblies for on-orbit operation.
• Package and integrate electronics assemblies and avionics hardware within the spacecraft structure, accounting for thermal interface requirements, EMI shielding, harness routing, and accessibility for integration and test.
• Support propulsion system integration, including structural mounting, propellant line routing, thruster bracket design, and compliance with propulsion subsystem interface requirements.
• Develop and manage detailed 3D CAD models and drawings for spacecraft components, subsystems, and assemblies using NX (Siemens) and/or SolidWorks, maintaining configuration integrity throughout the program.
• Define and enforce GD&T standards on piece part and assembly drawings, and review supplier and team deliverables for compliance.
• Lead and present at spacecraft design reviews (PDR, CDR, TRR) and drive resolution of technical risks, open actions, and subsystem interface trades.
• Serve as a key technical interface with structures, thermal, avionics, mechanisms, and propulsion teams to validate designs and ensure compliance with mission and environmental requirements.
• Develop and execute test plans to support structural and mechanisms qualification, acceptance testing, and on-orbit deployment verification.
• Mentor junior engineers and contribute to a culture of technical excellence, continuous improvement, and spacecraft engineering best practices.

BASIC QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering or a related engineering discipline.
• 6 -14 years of professional experience in mechanical design, with direct experience in spacecraft or satellite hardware development.
• Demonstrated experience designing structures for launch load environments, including familiarity with launch vehicle user guides, load cycle definition, and structural margin compliance.
• Hands-on experience with spacecraft mechanisms design, including deployment systems, release mechanisms, or other flight-qualified moving assemblies.
• Experience packaging electronics and avionics hardware within spacecraft structures, with an understanding of thermal interface management, harness routing, and integration constraints.
• Familiarity with propulsion system mechanical integration, including thruster and tank mounting, propellant line design, and interface requirements.
• Strong proficiency in 3D CAD modeling and drawing creation in NX (Siemens) and/or SolidWorks, including complex spacecraft assemblies and configuration management.
• Deep knowledge of GD&T principles and ability to define, review, and enforce standards across a program.
• Experience leading or significantly contributing to spacecraft hardware development from concept through delivery.
• Experience with configuration management, MES, and PLM tools (e.g., Teamcenter, Windchill).
• Strong written and verbal communication skills, with the ability to present technical content clearly to both engineering and leadership audiences.

PREFERRED SKILLS AND EXPERIENCE

• Master's degree in Mechanical Engineering or a related discipline.
• 5+ years of experience specifically in LEO/GEO satellite, small sat, or on-orbit servicing vehicle mechanical design.
• Experience with smallsat or CubeSat platforms, including mass-constrained design, commercial off-the-shelf (COTS) component integration, and compressed development schedules.
• Experience with on-orbit servicing or proximity operations vehicles, including docking mechanisms, capture systems, or servicer-to-client structural interfaces.
• Familiarity with structural analysis methods and FEA tools (e.g., NASTRAN, Ansys) and ability to interpret and apply results to drive design decisions.
• Experience leading spacecraft design reviews and managing technical risk across a subsystem or full vehicle.
• Track record of innovative problem-solving under mass, volume, and schedule constraints typical of spacecraft programs.
• Familiarity with relevant aerospace and spacecraft standards (e.g., NASA-STD-5001, GEVS, MIL-SPEC, AIAA S-110) and their application to design and test.
• Experience interfacing directly with machine shops, fabrication vendors, and manufacturing teams to support DFM and flight hardware producibility.
• Experience working in a startup or fast-paced environment with compressed development timelines.
• Active U.S. security clearance (Secret or above), or ability and willingness to obtain one.

COMPENSATION

• Base Salary: $125,000 - $255,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—Successful candidates will be located near Denver or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

As a Mechanical Engineer (I-II) at True Anomaly, you will be at the forefront of designing and developing the next generation of spacecraft that define the future of space security and sustainability. From LEO/GEO satellites to small sat platforms and on-orbit servicing vehicles, you will own the mechanical design of flight systems that operate in some of the most demanding environments known to engineering. This is a rare opportunity to shape vehicle architecture from the ground up — translating mission requirements into flight-ready hardware that safeguards access to space for the U.S. and its allies.

RESPONSIBILITIES

• Support the design, analysis, and optimization of mechanical structures, mechanisms, and assemblies for LEO/GEO satellites, small sat platforms, and on-orbit servicing vehicles, ensuring designs meet performance, mass, and reliability requirements.
• Assist in the development of spacecraft structural systems from concept and trade studies through prototyping and flight hardware delivery, under the guidance of senior engineers.
• Support the design of primary and secondary structures for launch load environments, including sine burst, random vibration, and shock, in compliance with launch vehicle ICD requirements.
• Contribute to the design of spacecraft mechanisms and deployment systems, including hinges, hold-down and release mechanisms, and other moving assemblies intended for on-orbit operation.
• Assist in the packaging and integration of electronics assemblies and avionics hardware within the spacecraft structure, with consideration for thermal interfaces, harness routing, and accessibility during integration and test.
• Support propulsion system mechanical integration efforts, including structural mounting, thruster bracket design, and propellant line routing.
• Develop and maintain detailed 3D CAD models and drawings for spacecraft components, subsystems, and assemblies using NX (Siemens) and/or SolidWorks.
• Create accurate piece part and assembly drawings with proper application of GD&T standards.
• Support design reviews (PDR, CDR, TRR) by preparing technical documentation, design rationales, and interface control documents.
• Assist in the development and execution of structural and mechanisms test plans to support hardware qualification and acceptance activities.
• Work within configuration management systems and PLM/MES tools to maintain design integrity and documentation traceability.

QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering or a related engineering discipline.
• 1–7 years of professional experience in mechanical design, preferably within aerospace, defense, or a related industry.
• Exposure to or coursework in spacecraft or satellite systems, including structural design, mechanisms, or space environment considerations.
• Hands-on experience with 3D CAD modeling and drawing creation in NX (Siemens) and/or SolidWorks.
• Working knowledge of GD&T principles and their application to piece part and assembly drawings.
• Familiarity with structural and mechanical design principles, including load paths, joints, and materials selection relevant to launch and on-orbit environments.
• Exposure to mechanisms design, including hinges, deployment systems, actuators, or other moving assemblies.
• Familiarity with electronics packaging concepts, including thermal interface materials, harness routing, and avionics integration constraints.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to work effectively in a collaborative, cross-functional team environment.
• Strong written and verbal communication skills.

PREFERRED SKILLS AND EXPERIENCE

• Experience designing hardware for space or flight environments, including considerations for launch loads, thermal cycling, vacuum outgassing, and radiation.
• Familiarity with smallsat or CubeSat platforms, including COTS component integration and mass-constrained design.
• Exposure to on-orbit servicing concepts, proximity operations vehicles, or docking and capture mechanisms.
• Familiarity with structural analysis methods or FEA tools (e.g., NASTRAN, Ansys) and ability to interpret results in support of design decisions.
• Exposure to propulsion system mechanical integration, including thruster or tank mounting and propellant line routing.
• Familiarity with relevant spacecraft and aerospace standards (e.g., NASA-STD-5001, GEVS, AIAA S-110, MIL-SPEC).
• Exposure to full hardware lifecycle, from concept and design through fabrication, assembly, and test.
• Familiarity with configuration management and PLM tools (e.g., Teamcenter, Windchill) and engineering change processes.
• Experience working in a startup or fast-paced environment with compressed development timelines.
• Active U.S. security clearance or ability and willingness to obtain one.

COMPENSATION

• Base Salary:  
  • $70,000 - $165,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—Successful candidates will be located near Denver or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative and experienced Senior PLM/CM Administrator that desires to be a hands-on technical expert responsible for the stability, configuration, and advanced support of the Siemens Teamcenter PLM platform. This role serves as the functional and technical lead for Teamcenter operations, driving system improvements, and supporting complex business processes.  As this team grows, someone that hungers to mentor junior PLM staff will be critical to this teams success.

RESPONSIBILITIES

• Serve as the primary technical owner for Teamcenter administration, CAD and configuration
• Configure and maintain items, revisions, BOMs, datasets, lifecycles, workflows, and access controls as well as standard parts libraries, document and drawing
• Extensive experience with Microsoft office suite and strong ability to clean and format documents (table of contents, figures, hyperlinks ect.)
• Management processes (ECR/ECO/ECN) and release workflows
• Ensure data integrity, governance, and compliance across product structures and lifecycle states
• Define and enforce PLM standards, best practices, and data models
• Act as the highest level of PLM support for complex issues and root-cause analysis
• Support and troubleshoot CAD and CAD integrations (NX, Solid Edge, CATIA, Creo)
• Coordinate with Siemens GTAC or external partners for advanced issue resolution
• Lead testing, validation, and deployment for Teamcenter upgrades, patches, and enhancements
• Support or lead PLM improvement initiatives, including new module adoption and process optimization and Collaborate/support IT on ERP and downstream integrations
• Serve as a technical mentor to junior PLM administrators
• Provide guidance and best practices to program, engineering and manufacturing stakeholders
• Develop and maintain technical documentation, training materials, and SOPs

QUALIFICATIONS

• High school diploma or equivalent with 7-10 years of experience in PLM administration or configuration management
• Strong expertise in PLM concepts, BOM management, and change control
• Experience with Teamcenter configuration tools (BMIDE, preferences, workflows)
• Proven ability to independently troubleshoot and resolve complex system issues
• Strong time management/delegation skills with ability to balance multiple tasks simultaneously

PREFERRED SKILLS AND EXPERIENCE

• Bachelor’s degree in Engineering, Computer Science, IT, or related field (or equivalent experience)
• 5+ years of hands-on Siemens Teamcenter administration experience
• Experience with Teamcenter Active Workspace configuration and deployment
• Exposure to Teamcenter architecture (2-tier / 4-tier) and system performance considerations
• Experience with Teamcenter upgrades, migrations, or large-scale implementations
• Basic knowledge of ITK, SOA, or scripting
• Experience in regulated or complex manufacturing environments (automotive, aerospace, industrial, medical devices)
• Experienced in leading configuration activities using BMIDE, preferences, and business rules

COMPENSATION

• Base Salary:  $125,000 - $195,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Colorado Springs. While we observe a hybrid work environment, some work must be done on site.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Principal Mechanical Engineer at True Anomaly, you will be responsible for leading the design of mechanical assemblies for flight systems and other ground support mechanisms in the development of our spacecrafts. You will be the technical expert for the Mechanical team providing knowledge and mentorship to junior engineers. This is an opportunity to design and develop our next generation LEO/GEO vehicles, shaping the future of space exploration from the ground up.

RESPONSIBILITIES

• Lead the design, analysis, and optimization of mechanical systems and structures for advanced satellites and/or missile defense products, ensuring they meet performance, weight, and reliability requirements.
• Develop or direct the detailed and organized 3D CAD models for spacecraft components, subsystems, and assemblies.
• Develop or direct the creation of detailed piece part and assembly drawings of flight components.
• Support build/assembly and test campaigns of flight systems.
• Work collaboratively with structural, thermal, and propulsion teams during analysis to validate designs and ensure compliance with mission requirements.
• Drive collaboration with all vehicle subsystems to ensure mechanical designs are inclusive of all system needs
• Contribute to continuous improvement initiatives to enhance design efficiency, manufacturability, and system performance.
• End-to-end development of mechanical structures, from concept and prototyping to qualification and flight hardware delivery.
• Apply industry specification and best practices to product designs to achieve quality results
• Manage assigned teams/project(s) effectively, achieving desired cost, schedule, and technical outcomes
• Contribute to the creation of process and guiding principles that define quality for the products made and reduce technical escapes

QUALIFICATIONS

• Bachelor’s degree in Mechanical Engineering
• 12+ years of professional experience in Space Mechanisms (hard requirement).
• Demonstrated experience with spacecraft level mechanical architecture, design as well as payload and component level design such as space mechanisms and electronics packaging.
• Demonstrated excellence in mechanical GD&T.
• Experience with configuration control, MES and PLM tools.
• Mastery in CAD tools, such as SolidWorks.
• Demonstrated ability to work and lead a multidisciplinary team of engineers in a fast-paced environment.
• Excellent written and verbal communication skills.
• Expansive understanding of manufacturing processes available/related to space hardware
• Passion for the space industry.

PREFERRED SKILLS AND EXPERIENCE

• Master’s degree in Mechanical Engineering.
• 15+ years professional experience in development and production of space systems.
• Experience in or exposure to mechanical design for propulsion systems, mechanisms, and/or optical payloads.
• Track record of innovative problem-solving in complex mechanical designs.
• Experience working in a startup or similarly dynamic and fast-paced environment.
• Familiarity with full vehicle lifecycle from concept through production and launch
• Aptitude and comfort with/for clean sheet design, requirements creation, and working in environments with substantial ambiguity
• Experience in missile defense product design.

COMPENSATION

• Base Salary:  $180,000 - $300,000 
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location: This is an onsite role at our Centennial Gravity Works facility.
• Work environment is in a standard office, working at a desk or in a production factory.
• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative PLM/CM Administrator that desires to be a hands-on administrator supporting the stability, configuration, and advanced support of the Siemens Teamcenter PLM platform. This role provides support to the Senior PLM/CM Administrator and assists with driving system improvements, supporting complex business processes and actively engages/supports day to day configuration management activities.

RESPONSIBILITIES

• Provide first-level support for Teamcenter users (account issues, access requests, basic troubleshooting)
• Knowledge of starting workflows in PLM/CM software (Teamcenter, windchill, Enovia or similar).
• Assist with user onboarding, role assignments, and training coordination
• Support BOM maintenance, item creation, and revision management
• Ability to monitor and maintain change workflows and lifecycle states
• Perform data cleanup and validation to ensure accuracy and consistency
• Experience with or knowledge of creating standard parts libraries, documents, and drawing templates
• Experience with Microsoft office suite and understanding of document formatting features (table of contents, figures, hyperlinks ect.)
• Assist senior admins with testing, upgrades, and enhancements
• Document procedures and support knowledge base updates
• Desire for hands-on approach to troubleshooting and problem solving

QUALIFICATIONS

• High school diploma or equivalent with 2-5 years of experience in PLM administration, configuration management, CAD design, or related field
• Basic understanding of engineering data, BOMs, and change management
• Willingness to learn Teamcenter configuration and best practices

PREFERRED SKILLS AND EXPERIENCE

• Bachelor’s degree or equivalent experience in Engineering, IT, or related field and 0 –2 years of experience with PLM systems (Teamcenter preferred – partial college course work considered)
• Exposure to Teamcenter Active Workspace
• Experience supporting engineering users or CAD tools
• Strong attention to detail and customer-service mindset
• Experience with additive manufacturing workflows
• CAD design/modeling experience using SolidWorks, Creo, Catia or similar; NX preferred
• Demonstrated experience working in high-pace development program with multiple projects/programs running concurrently.
• Ability to maintain or obtain TS//SCI clearance.

COMPENSATION

• Base Salary:   $80,000 - $130,000 
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Colorado Springs. While we observe a hybrid work environment, some work must be done on site.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

We are seeking a Mechanical Engineer, Tooling and MGSE (Senior - Staff) to serve as technical authority and team leader for tooling and ground support equipment across our Space Systems programs. The title and scope will be calibrated to your depth of experience — at the senior end you will operate as a highly autonomous individual contributor; at the staff and lead end you will own program tooling strategy, lead a team, define standards, and serve as the primary interface with program leadership and government stakeholders. Specific level will be determined based on candidate experience. 

RESPONSIBILITIES

• Serve as technical authority for spacecraft tooling and MGSE — from requirements definition through design, fabrication, qualification, configuration control, and sustained production support. 
• Lead design of complex tooling including precision assembly fixtures, spacecraft lifting and handling systems, gravity offload equipment, optical handling fixtures, transportation/environmental containers, and STE/ATP fixtures. 
• Define tooling engineering strategies, standards, and best practices; champion DFM/DFMA adoption and drive continuous improvement across the tooling lifecycle. 
• Lead or manage a team of tooling engineers and designers: assign work, perform design checker duties, manage deliverable quality, and support career development. 
• Own the full vendor relationship lifecycle: SOW/RFQ development, source selection, fabrication oversight, technical disposition of non-conformances, and supplier performance management. 
• Chair or co-chair tooling PDR/CDR; present tooling status, risk, and schedule posture to program management, customers, and government stakeholders. 
• Define and enforce cleanroom tooling protocols; collaborate with facilities to maintain cleanroom certification and AI&T readiness. 
• Lead root cause investigations on complex tooling anomalies; drive systemic CAPA across the portfolio. 
• Own configuration control discipline across the complete tooling data package: models, drawings, BOMs, work instructions, and proof test records. 
• Develop and maintain tooling schedules and budgets; provide accurate EAC inputs and proactively surface cost and schedule risks. 
• Represent tooling/MGSE at spacecraft hardware PDR/CDR; provide producibility and toolability guidance to design engineering teams. 
• Ensure compliance with ASME BTH-1, NASA SP-8077, JSC-65289, ASME Y14.5, ASME Y14.100, and applicable MIL-STDs across all team deliverables. 

QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related STEM field. Graduate degree strongly preferred for staff and lead roles. 
• Minimum 8 years of professional experience in tooling, MGSE, or manufacturing engineering within aerospace or defense. Staff and lead roles typically require 12+ years with demonstrated team leadership. 
• Expert proficiency in 3D CAD (CREO, NX, or CATIA V5) and PLM/PDM (Windchill, Teamcenter). 
• Expert application of GD&T (ASME Y14.5) and advanced tolerance analysis; qualified to serve as technical checker for team and vendor designs. 
• Proven record of managing complex tooling programs from concept through sustained production. 
• Strong vendor management: SOW development, source selection, performance management, and disposition of non-conformances. 
• Demonstrated leadership: mentoring engineers, driving team performance, and influencing cross-functional partners. 
• Executive-level communication skills; experienced presenting to senior leadership, customers, and government stakeholders. 
• U.S. citizenship or equivalent ITAR eligibility; active Secret clearance required. TS/SCI eligibility preferred. 

PREFERRED SKILLS AND EXPERIENCE

• Extensive direct experience with spacecraft, satellite, or launch vehicle tooling and MGSE in a cleanroom AI&T environment. 
• Experience with optical instrument handling, precision alignment fixtures, and passive gravity offload systems for deployable structures. 
• Structural analysis expertise (ANSYS, FEMAP/NASTRAN) qualifying lifting equipment to ASME BTH-1 and NASA SP-8077. 
• Experience managing a tooling portfolio spanning 20+ active designs across concurrent programs. 
• Demonstrated expertise designing large structural weldments for aerospace GSE and tooling — welded steel frames, lifting structures, integration stands, and handling bases — with proficiency in weld joint design, weld symbol specification per AWS A2.4, pre- and post-weld distortion control, material selection for weldability, and vendor qualification of weld procedure specifications (WPS) and welder certifications. 
• Prior experience as configuration control authority for a major program's tooling design data package. 
• Prior experience or familiarity with launch site complications. 
• Active Secret or TS/SCI clearance. 

COMPENSATION

• Base Salary:  $125,000 - $255,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

The next generation of Space Based Interceptors demands hardware that performs flawlessly at hypersonic speeds, survives extreme thermal and aerodynamic environments, and delivers precision intercept against the most advanced threats ever fielded. True Anomaly is building that hardware — and we are looking for engineers who want to be part of it. 

As a Mechanical Engineer at True Anomaly, you will play a critical role in designing and developing flight hardware for some of the most technically demanding programs in the defense aerospace industry. From interceptor systems and kill vehicles to hypersonic flight vehicles, you will engineer mechanical systems that must perform flawlessly in extreme thermal, aerodynamic, and high-g environments — building the hardware that matters most when it counts. 

RESPONSIBILITIES

• Support the design, analysis, and optimization of mechanical structures and assemblies for interceptor systems, kill vehicles, and hypersonic flight vehicles, ensuring designs meet performance, mass, survivability, and reliability requirements.  
• Assist in the development of flight vehicle structural systems from concept and trade studies through prototyping and hardware delivery, under the guidance of senior engineers.  
• Support the design of primary and secondary airframe structures for high-dynamic-pressure, high-g maneuver, and thermally coupled hypersonic flight environments, including aerodynamic loading, vibration, and shock.  
• Contribute to the packaging and integration of guidance, navigation, and control (GN&C) hardware, seeker assemblies, and sensor systems within flight vehicle structures, with consideration for optical alignment, vibration isolation, EMI shielding, and thermal management.  
• Assist in the design and application of thermal protection system (TPS) components and high-temperature structural assemblies for hypersonic and re-entry environments, including exposure to ablative, ceramic, and composite TPS materials.  
• Support propulsion system mechanical integration efforts, including solid rocket motor structural interfaces, divert and attitude control system (DACS) packaging, and nozzle and thrust vector control (TVC) structural interfaces.  
• Develop and maintain detailed 3D CAD models and drawings for flight vehicle components, subsystems, and assemblies using NX (Siemens) and/or SolidWorks.  
• Create accurate piece part and assembly drawings with proper application of GD&T standards.  
• Support design reviews (PDR, CDR, TRR) by preparing technical documentation, design rationales, and interface control documents.  
• Assist in the development and execution of structural and environmental test plans to support hardware qualification and acceptance activities.  
• Work within configuration management systems and PLM/MES tools to maintain design integrity and documentation traceability. 

QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related engineering discipline.  
• 1–4 years of professional experience in mechanical design, preferably within Space Based Interceptors, hypersonic systems, defense aerospace, or a related industry.  
• Exposure to or coursework in missile systems, hypersonic vehicle design, or high-performance flight vehicle structures, including aerodynamic loading, thermal-structural coupling, or re-entry environments.  
• Hands-on experience with 3D CAD modeling and drawing creation in NX (Siemens) and/or SolidWorks.  
• Working knowledge of GD&T principles and their application to piece part and assembly drawings.  
• Familiarity with structural and mechanical design principles, including load paths, joints, and materials selection relevant to high-dynamic-pressure and thermally demanding flight environments.  
• Exposure to guidance or seeker packaging concepts, including sensor integration constraints, vibration isolation, optical alignment, and EMI management.  
• Familiarity with high-temperature materials or TPS concepts used in hypersonic or re-entry applications.  
• Strong analytical and problem-solving skills with attention to detail.  
• Ability to work effectively in a collaborative, cross-functional team environment.  
• Strong written and verbal communication skills. 

PREFERRED SKILLS AND EXPERIENCE

• Experience designing hardware for high-performance flight environments, including considerations for aerodynamic heating, high-g loading, shock, and vibration.  
• Familiarity with interceptor, kill vehicle, or re-entry system hardware, including mass-constrained structures and precision seeker or sensor integration.  
• Exposure to TPS design or high-temperature materials, including ablative, ceramic, or composite systems used in hypersonic or re-entry applications.  
• Familiarity with hypersonic flight vehicle aeroshell design concepts, including structural joints under aeroheating and TPS panel integration.  
• Exposure to propulsion system mechanical integration, including solid rocket motor, DACS, or TVC interface design.  
• Familiarity with structural analysis methods or FEA tools (e.g., NASTRAN, Ansys) and ability to interpret results in support of design decisions.  
• Background in or exposure to spacecraft or satellite mechanical design, with ability to apply crossover principles from space environment hardware to Space Based Interceptors applications.  
• Familiarity with relevant defense and aerospace standards (e.g., MIL-STD-810, MIL-STD-1540, MIL-SPEC, AIAA S-110).  
• Exposure to full hardware lifecycle, from concept and design through fabrication, assembly, and test.  
• Familiarity with configuration management and PLM tools (e.g., TeamCenter, Windchill) and engineering change processes.  
• Experience working in a startup or fast-paced defense environment with compressed development timelines.  
• Active U.S. security clearance or ability and willingness to obtain one. 

COMPENSATION

• Base Salary:  $125,000 - $255,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is a fully onsite role. Candidates must be based in or able to commute to our Denver or Long Beach office daily.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

We are seeking a Senior or Staff Mechanical Engineer, Space Based Interceptors Tooling & MGSE Design to serve as technical authority and team leader for tooling and ground support equipment across our Space Based Interceptors programs. The title and scope will be calibrated to your depth of experience — at the senior end you will operate as a highly autonomous individual contributor with recognized domain expertise; at the staff and lead end you will own the full program tooling strategy, lead a team, set engineering standards, and serve as the primary interface with program leadership, MDA program offices, and government stakeholders. All candidates should bring 8+ years of tooling and MGSE experience within missile defense, missile systems, rocket propulsion, or closely related defense manufacturing domains. Specific level will be determined based on candidate experience.  

RESPONSIBILITIES

• Serve as technical authority for Space Based Interceptors tooling and MGSE — from requirements definition through design, fabrication, qualification, configuration control, and sustained production support. 
• Lead design of complex tooling including precision interceptor assembly fixtures, kill vehicle integration tooling, canister and launcher assembly GSE, STE/ATP fixtures, below-the-hook lifting devices, and missile transportation and environmental containers. 
• Define tooling engineering strategies, standards, and best practices; champion DFM/DFMA adoption and drive continuous improvement across the tooling lifecycle. 
• Lead or manage a team of tooling engineers and designers: assign work, perform design checker duties, manage deliverable quality, and support career development. 
• Own the full vendor relationship lifecycle: SOW/RFQ development, source selection, fabrication oversight, technical disposition of non-conformances, and supplier performance management. 
• Chair or co-chair tooling PDR/CDR; present tooling status, risk, and schedule posture to program management, MDA program offices, and government stakeholders. 
• Maintain and enforce DoD, MDA, and ATF safety and regulatory compliance across all tooling and GSE designs; serve as the program's tooling safety authority. 
• Lead root cause investigations on complex tooling anomalies; drive systemic CAPA to prevent recurrence across the portfolio. 
• Own configuration control discipline across the complete tooling data package: models, drawings, BOMs, work instructions, lift safety assessments, and proof test records. 
• Develop and maintain tooling program schedules and budgets; provide accurate EAC inputs and proactively surface and mitigate cost and schedule risks. 
• Represent tooling/MGSE at Space Based Interceptors hardware PDR/CDR; provide producibility and toolability guidance to hardware design teams. 
• Ensure compliance with ASME BTH-1, MIL-STD-882E, ASME Y14.5, ASME Y14.100, and applicable MDA and program-specific tooling standards across all team deliverables. 

QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related STEM field. Graduate degree strongly preferred for staff and lead roles. 
• Minimum 8 years of professional experience in tooling, MGSE, or manufacturing engineering within Space Based Interceptors, missile systems, rocket propulsion, or munitions manufacturing. Staff and lead roles typically require 12+ years with demonstrated team leadership. 
• Expert proficiency in 3D CAD (CREO, NX, or CATIA V5) and PLM/PDM (Windchill, Teamcenter). 
• Expert application of GD&T (ASME Y14.5) and advanced tolerance analysis; qualified to serve as technical checker for team and vendor designs. 
• Proven record of managing complex missile defense tooling programs from concept through sustained production. 
• Deep experience directing fabrication vendors: SOW development, source selection, performance management, and disposition of non-conformances. 
• Demonstrated DoD/MDA regulatory knowledge: MIL-STD-882E system safety, ATF Employee Possessor requirements, and ordnance-adjacent manufacturing compliance. 
• Executive-level communication skills; experienced presenting to senior program leadership, MDA program offices, and government stakeholders. 
• U.S. citizenship required; active Secret clearance required. TS/SCI eligibility required for certain program assignments. 

PREFERRED SKILLS AND EXPERIENCE

• Extensive direct experience as tooling technical lead on major Space Based Interceptors programs: THAAD, PAC-3/MSE, SM-3 Block IIA, GMD/GBI, Next Generation Interceptor (NGI), JASSM, LRASM, or equivalent MDA/Army/Navy programs. 
• Deep experience with kill vehicle integration tooling, canister and launcher assembly tooling, and precision interceptor handling GSE. 
• Experience managing ATF Employee Possessor status programs and associated tooling and handling safety regimes. 
• Structural analysis expertise (ANSYS, FEMAP/NASTRAN) qualifying lifting and handling equipment to ASME BTH-1 and MIL-STD-882E. 
• Experience managing a tooling portfolio spanning 20+ active designs across multiple concurrent MDA or service-funded programs. 
• Prior experience authoring missile handling safety assessments, ordnance tooling qualification plans, and ATF compliance documentation. 
• Deep knowledge of solid rocket motor handling, assembly, and storage tooling requirements. 
• Demonstrated expertise designing large structural weldments for aerospace GSE and tooling — welded steel frames, launcher support structures, integration stands, and handling bases — with proficiency in weld joint design, weld symbol specification per AWS A2.4, pre- and post-weld distortion control, material selection for weldability, and vendor qualification of WPS and welder certifications. 
• Active Secret or TS/SCI clearance. 

COMPENSATION

• Base Salary:  
  • $125,000 - $255,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

The next generation of Space Based Interceptors demands hardware that performs flawlessly at hypersonic speeds, survives extreme thermal and aerodynamic environments, and delivers precision intercept against the most advanced threats ever fielded. True Anomaly is building that hardware — and we are looking for engineers who want to be part of it. 

As a Mechanical Engineer at True Anomaly, you will play a critical role in designing and developing flight hardware for some of the most technically demanding programs in the defense aerospace industry. From interceptor systems and kill vehicles to hypersonic flight vehicles, you will engineer mechanical systems that must perform flawlessly in extreme thermal, aerodynamic, and high-g environments — building the hardware that matters most when it counts. 

RESPONSIBILITIES

• Serve as technical authority and subject matter expert in Space Based Interceptors and hypersonic vehicle mechanical design, providing engineering leadership across interceptor, kill vehicle, and hypersonic flight vehicle programs.  
• Own and drive the full mechanical architecture of flight vehicle structures and systems — from system-level requirements definition and concept development through qualification, flight certification, and lessons learned capture.  
• Define structural design philosophy, sizing criteria, and margins of safety for flight vehicle primary and secondary structures across high-dynamic-pressure, high-g maneuver, and thermally coupled hypersonic flight environments.  
• Lead the design and development of guidance, navigation, and control (GN&C) hardware and seeker packaging architectures, establishing integration standards for precision optical and RF sensor assemblies within highly constrained kill vehicle and interceptor envelopes.  
• Own the thermal protection system (TPS) design strategy for hypersonic and re-entry flight vehicles, including material selection, panel and tile integration architecture, aeroheating-driven structural trades, and qualification approach for ablative, ceramic, and composite TPS systems.  
• Lead mechanical integration of propulsion subsystems, including solid rocket motor structural interfaces, divert and attitude control system (DACS) packaging, nozzle and TVC structural design, and cross-discipline coordination with propulsion engineers to ensure system-level compliance.  
• Define and maintain vehicle-level mechanical interface control documents (ICDs), mass properties reports, and configuration baselines across program milestones.  
• Chair and lead formal vehicle design reviews (SRR, PDR, CDR, TRR, FRR) and drive closure of technical risks, RFIs, and subsystem interface actions across the engineering team.  
• Establish and enforce GD&T standards, drawing conventions, and CAD model management practices across the mechanical engineering team.  
• Collaborate with systems engineering, aerodynamics, thermal, GN&C, and propulsion teams to derive and flow down mechanical requirements, perform requirements verification, and support IV&V activities.  
• Develop and approve structural and environmental qualification and acceptance test plans, witness testing, and resolve anomalies and non-conformances against program requirements.  
• Leverage spacecraft and space environment design expertise — including precision mechanisms, electronics packaging, and launch load structural design — to inform cross-domain solutions and bring asymmetric technical advantage to Space Based Interceptors and hypersonic programs.  
• Provide technical mentorship and career development guidance to junior and mid-level mechanical engineers, building team capability and domain expertise in Space Based Interceptors and hypersonic systems.  
• Partner with program management and business development to support proposal efforts, schedule and resource planning, and new program captures in Space Based Interceptors and hypersonic domains. 

QUALIFICATIONS

• Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related engineering discipline.  
• 7–15+ years of professional experience in mechanical design, with the majority spent on Space Based Interceptors, hypersonic vehicle, or high-performance flight system programs.  
• Demonstrated expertise in flight vehicle structural design for high-dynamic-pressure, thermally coupled, and high-g flight environments, including experience across multiple interceptor, kill vehicle, or re-entry system programs.  
• Extensive hands-on experience with guidance and seeker packaging architecture, including precision optical or RF sensor integration, alignment and retention design, vibration isolation, and EMI management within kill vehicle or interceptor envelopes.  
• Deep experience with TPS design and high-temperature materials, including ablative, ceramic, and composite systems, and ownership of TPS qualification approaches for hypersonic or re-entry applications.  
• Proven experience leading mechanical integration of propulsion subsystems, including solid rocket motor interfaces, DACS packaging, and TVC structural design, with full cross-discipline coordination responsibility.  
• Expert-level proficiency in NX (Siemens) and/or SolidWorks, including complex multi-subsystem vehicle assemblies, configuration management, and CAD team leadership.  
• Mastery of GD&T principles, with experience defining and enforcing drawing and model standards across a program or organization.  
• Proven track record of leading flight vehicle hardware programs from concept through test or flight certification, including full ownership of technical risk and schedule.  
• Experience chairing or leading formal vehicle design reviews at the subsystem or full vehicle level.  
• Strong familiarity with relevant defense and aerospace standards (e.g., MIL-SPEC, MIL-STD-810, MIL-STD-1540, AIAA S-110) and their application to design, analysis, and test.  
• Experience with configuration management, MES, and PLM tools (e.g., TeamCenter, Windchill) at a program leadership level.  
• Excellent written, verbal, and presentation skills, with demonstrated ability to communicate complex technical topics to executive, program, and customer audiences. 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree or PhD in Mechanical Engineering, Aerospace Engineering, or a related discipline.  
• 10+ years of experience specifically in interceptor systems, kill vehicles, or hypersonic flight vehicle mechanical design, with multiple programs delivered to flight test or operational fielding.  
• Experience as a lead mechanical engineer or chief engineer on a Space Based Interceptors or hypersonic program, with ownership of vehicle-level mechanical architecture and cross-subsystem integration.  
• Deep experience with kill vehicle or hit-to-kill interceptor hardware, including ultra-mass-constrained structures, precision seeker alignment under vibration and thermal loading, and flight-critical deployment or divert mechanism design.  
• Experience with hypersonic flight vehicle aeroshell design, including TPS panel integration, structural joint design under aeroheating, and ablative material qualification.  
• Background in spacecraft or satellite mechanical design, with the ability to apply space environment principles — precision mechanisms, electronics packaging, launch load structures — as cross-domain technical leverage on Space Based Interceptors and hypersonic programs.  
• Familiarity with structural analysis and FEA methods (e.g., NASTRAN, Ansys) and demonstrated ability to guide and review analysis performed by the broader engineering team.  
• Experience supporting business development, proposal writing, and new program captures in missile defense or hypersonic domains, including DARPA, MDA, or Air Force Research Laboratory programs.  
• Background working in a startup or high-growth aerospace and defense company, with experience scaling engineering teams and processes under program constraints.  
• Active U.S. security clearance (Secret or TS/SCI), or ability and willingness to obtain one. 

COMPENSATION

• Base Salary:  $125,000 - $255,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

As a Mechanical CAD Drafter at True Anomaly, you will play a vital role in bringing spacecraft hardware to life through precise, production-ready drawings and documentation. From flight components to ground support equipment, you will translate complex engineering concepts into clear, manufacturable designs that support every phase of spacecraft development. This is an opportunity to build deep technical expertise at the intersection of design, manufacturing, and space systems — working alongside engineers and technicians to ensure our hardware meets the highest standards of quality and performance

RESPONSIBILITIES

• Develop accurate piece part and assembly drawings for flight hardware, GSE, and structural components, ensuring compliance with engineering requirements and GD&T standards.
• Translate verbal direction, sketches, and engineering inputs into detailed technical drawings using NX (Siemens), editing CAD models as needed to support drawing accuracy and completeness.
• Maintain and update existing drawings and models in response to engineering change orders, design reviews, and manufacturing feedback.
• Support the production of spacecraft assembly storyboards and work instructions to guide manufacturing and integration teams through build sequences.
• Produce and manage drawing packages for moderately complex flight hardware and GSE assemblies, scaling in complexity and ownership with experience.
• Collaborate with mechanical, thermal, electrical, and structural engineers to incorporate design updates and resolve drawing-related discrepancies.
• Assist in the creation of technical documentation for design reviews (PDR, CDR, TRR), including drawing packages and interface details.
• Work within configuration management systems to ensure drawing revisions are properly tracked and released.
• Support the fabrication and assembly process by providing technical drawing guidance to production and integration teams.
• At senior levels, own complex multi-level drawing packages across concurrent programs, serve as the primary technical resource for drawing standards and GD&T application, and drive continuous improvement in drafting processes and documentation practices.

BASIC QUALIFICATIONS

• Associate's degree in drafting, engineering technology, or a related discipline, or 2+ years of professional experience in mechanical drafting or aerospace engineering support.
• Working knowledge of mechanical GD&T principles and their application to manufactured parts and assemblies.
• Proficiency in NX (Siemens) for drawing creation; SolidWorks experience is acceptable.
• Familiarity with manufacturing processes and how drawing specifications translate to fabricated hardware.
• Ability to read and interpret complex engineering diagrams, schematics, and assembly instructions.
• Strong attention to detail with the ability to manage multiple drawing tasks in a fast-paced environment.
• Demonstrated ability to work effectively within a multidisciplinary team.
• Passion for the space industry and a desire to contribute to mission-critical hardware.

PREFERRED SKILLS AND EXPERIENCE

• Experience supporting aerospace, defense, or similarly regulated industries where drawing quality and configuration control are critical.
• Familiarity with spacecraft or satellite hardware, including flight structure, mechanisms, or GSE design and documentation.
• Exposure to assembly storyboarding or work instruction development for production environments.
• Experience working within configuration management or PLM systems (e.g., Windchill, Teamcenter) and engineering change processes.
• Familiarity with relevant aerospace drawing and documentation standards (e.g., ASME Y14.5, MIL-STD-100).
• Experience supporting design reviews and preparing formal drawing packages for technical milestone events.
• Comfort working in both office and production floor environments, interfacing directly with manufacturing and integration teams.
• Active U.S. security clearance or ability and willingness to obtain one.

COMPENSATION 

• Hourly Base Rates
  • CAD Drafter: $28.85 - $48.08 per hour
  • CAD Drafter II: $33.65 - $64.90 per hour
  • CAD Drafter III: $48.08 – $76.92 per hour
  • Senior CAD Drafter: $60.10 – $93.75 per hour

This position is non-exempt and is eligible for overtime.

Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education and experience.

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location: this role will be fully onsite at our GravityWorks factory in Centennial, CO or Long Beach, CA
• Work environment is in a standard office, working at a desk or in a production factory.
• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are seeking a highly motivated Test Engineer to support the design, planning, and execution of test campaigns for aerospace defense systems. You will work closely with engineers, program managers, and technical teams to ensure that systems meet performance, environmental, and mission-critical requirements. In this role, you will develop test plans, execute tests, collect data, analyze results, and ensure that the systems meet all specifications. The position offers an excellent opportunity to contribute to cutting-edge aerospace technologies in a fast-paced, mission-driven environment.

RESPONSIBILITIES

• Support or lead the planning, setup, execution, and documentation of component- and system-level tests across mechanical, electrical, and environmental domains 
• Develop, review, and maintain test procedures, plans, reports, and data packages aligned with engineering requirements and program needs 
• Execute test procedures, collect and validate test data, and ensure adherence to safety, quality, and configuration control standards 
• Analyze test results, document anomalies, and support root cause investigations in collaboration with cross-functional teams 
• Coordinate with design, systems, manufacturing, and quality teams to ensure tests align with verification and validation requirements 
• Prepare for and participate in test readiness reviews, pre-test briefings, and post-test debriefs 
• Maintain organized test documentation to support internal, customer, and audit reviews 
• Contribute to continuous improvement of test methodologies, tooling, automation, and data analysis practices 

QUALIFICATIONS

• Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field 
• Test Engineer I: Bachelor’s degree with 0–1 years of academic or industry experience in a test, validation, or lab environment 
• Test Engineer II: Bachelor’s degree with 2–4+ years of hands-on test engineering experience within the aerospace or defense industry, or a Master’s degree with relevant experience 
• Demonstrated proficiency in, or strong interest in developing expertise across, test planning, execution, and post-test analysis using modern tools and methods 
• Working knowledge of test equipment, instrumentation, data acquisition systems, and test scription or automation 
• Strong attention to detail and ability to follow defined processes and safety protocols 
• Proficiency with Microsoft Office; ability to learn test management and data analysis tools 
• Strong documentation and communication skills 
• U.S. Citizenship required due to government contracts 

PREFERRED SKILLS AND EXPERIENCE

• Experience with environmental testing (vibration, thermal, shock, TVAC, EMI/EMC) 
• Strong technical writing and report generation skills 
• Familiarity with aerospace and defense test standards (e.g., MIL-STD-810, DO-160) 
• Hands-on experience with lab instrumentation, sensors, and DAQ systems 
• Experience with data analysis or automation tools such as LabVIEW, MATLAB, or Python 
• Exposure to failure investigations, root cause analysis, and non-conformance tracking 
• Active DoD clearance or ability to obtain one 

COMPENSATION

• Test Engineer I Base Salary: $70,000-$110,000
• Test Engineer II Base Salary: $80,000-$130,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location— this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are seeking a Staff or Principle Systems Engineer to join our team as a Lead Systems Engineer (LSE) in developing and integrating cutting-edge aerospace and defense systems. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. The Lead Systems Engineer (LSE) has ownership and responsibility over the requirements, verification, and validation (RV&V) efforts. The LSE is responsible for execution of day-to-day SE process, integration of MBSE and requirements tools, and leads gate review execution activities. The LSE oversees the daily activities, tasking, and prioritization of activities of program Systems Engineers. The LSE is for leading RV&V efforts, including requirements definition, decomposition, verification, and validation products. This includes products required to perform validation and verification not allocated to other teams, such as Test Plans. The LSE is responsible for guiding interface definition and leads mission and vehicle level gating reviews. The LSE has approving authority with the Chief Engineer for accepting hardware for vehicle integration. The LSE leads or delegates authority for Engineering Review Boards (ERB) and Failure Review Boards (FRBs).

RESPONSIBILITIES

The Systems Engineering team supports multiple programs and disciplines. We are seeking talented, flexible engineers with varying skillsets. In addition to the roles above, as a member of this team, you may:

• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Prepare detailed technical reports, presentations, and documentation for internal and external stakeholders, including government agencies and customers.
• Develop system-level integration and verification plans, conducting end-to-end testing to validate mission requirements.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Conduct system performance analysis, including reliability, safety, and mission effectiveness, under various environmental conditions.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Identify and analyze mission risks related to complex space missions, including collision risks and operational uncertainties.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution.

QUALIFICATIONS

• Staff level: 12+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Principal level: 15+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Strong technical leadership and systems architecture experience
• Proven leadership in design, analysis, and verification on a major aerospace program 
• Strong analytical and communication skills, with ability to lead technical trades 
• Demonstrated ability to balance technical rigor with schedule and program realities 
• Strong systems engineering and technical leadership background across mechanical, electrical, and software domains 
• Strong background in systems engineering practices: requirements, verification, trade studies, interface control, and failure analysis
• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary Staff : $155,000-$300,000
• Base Salary Principal: $155,000- $315,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

The Mission Systems Engineer will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex aerospace platforms. This engineer will be responsible for designing, analyzing, and optimizing spacecraft trajectories and operations related to rendezvous, docking, and proximity missions. This role will involve working on complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. This position will involve working closely with cross-functional teams to design, develop, and integrate system solutions for both manned and unmanned platforms in defense, space, and intelligence applications. 

We are seeking a Senior Systems Engineer to join our Mission Architecture team in developing and integrating cutting-edge aerospace and defense systems. The Mission Systems Engineer will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex aerospace platforms. This engineer will be responsible for designing, analyzing, and optimizing spacecraft trajectories and operations related to rendezvous, docking, and proximity missions. This role will involve working on complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. This position will involve working closely with cross-functional teams to design, develop, and integrate system solutions for both manned and unmanned platforms in defense, space, and intelligence applications. 

RESPONSIBILITIES

Mission Design & Requirements Analysis: 

• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Lead the design, simulation, and analysis of RPO mission trajectories.
• Optimize spacecraft maneuvers to achieve mission objectives while considering fuel efficiency, timing, and risk mitigation.
• Prepare detailed technical reports, presentations, and documentation for internal and external stakeholders, including government agencies and customers.
• Support proposal development and provide technical input for new mission opportunities. 

System Integration & Verification: 

• Oversee the integration of mission systems, ensuring seamless interaction between hardware, software, and operational components.
• Develop system-level integration and verification plans, conducting end-to-end testing to validate mission requirements.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.     

Modeling, Simulation & Analysis: 

• Develop, validate, and maintain high-fidelity models for spacecraft motion and environmental factors.
• Use advanced tools (e.g., STK, GMAT, MATLAB, FreeFlyer) to simulate mission scenarios and predict outcomes.
• Run Monte Carlo simulations to assess mission robustness under various contingencies.
• Use advanced simulation tools to model mission scenarios, system behaviors, and performance under operational conditions.
• Conduct system performance analysis, including reliability, safety, and mission effectiveness, under various environmental conditions.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Conduct pre-flight and post-flight mission analysis, including trajectory reconstruction and anomaly investigations. 

Risk Assessment & Mitigation: 

• Identify and analyze mission risks related to complex space missions, including collision risks and operational uncertainties.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution. 

QUALIFICATIONS

• 8+ years mission analysis, space operations, or orbital mechanics
• Strong technical leadership and systems architecture experience
• Demonstrated expertise in RPO mission design and spacecraft operations.
• Hands-on experience with mission analysis tools such as STK, FreeFlyer, GMAT, or similar software.
• Strong understanding of orbital mechanics, spacecraft dynamics, and autonomous space operations.
• Proficiency in simulation tools and programming languages (e.g., MATLAB, Python, C++).
• Experience with mission planning and real-time mission support.
• Must have or be able to obtain and maintain a TS/SCI or TS/SAP U.S. government security clearance. 

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary: $125,000 - $235,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO or Long Beach, CA office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

We are seeking a Senior Systems Engineer to join our team in developing and integrating cutting-edge aerospace and defense systems. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. You will perform requirements development, traceability, and verification across multiple vehicles and systems. You work closely with cross-functional teams while conducting impact analyses for changes, ensuring design integrity across the system, supporting integration and test planning, performing risk assessments, and leading design reviews.

RESPONSIBILITIES

The Systems Engineering team supports multiple programs and disciplines. We are seeking talented, flexible engineers with varying skillsets. As a member of this team, you may:

• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Prepare detailed technical reports, presentations, and documentation for internal and external stakeholders, including government agencies and customers.
• Develop system-level integration and verification plans, conducting end-to-end testing to validate mission requirements.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Conduct system performance analysis, including reliability, safety, and mission effectiveness, under various environmental conditions.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Identify and analyze mission risks related to complex space missions, including collision risks and operational uncertainties.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution.

QUALIFICATIONS

• 8+ years full lifecycle experience leading a major subsystem through design, test, and verification 
• Strong technical leadership and systems architecture experience
• Proven leadership in design, analysis, and verification on a major aerospace program 
• Strong analytical and communication skills, with ability to lead technical trades 
• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary: $125,000-$235,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location: this a fully onsite position based out of our Centennial, CO office.
• Work environment is in a standard office, working at a desk or in a production factory.
• Physical demands may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.
•  

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

We are seeking Level 3 Systems Engineer to join our team in developing and integrating cutting-edge aerospace and defense systems. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. You will support requirements development, traceability, and verification across multiple vehicles and systems. You work closely with cross-functional teams while conducting impact analyses for changes, ensuring design integrity across the system, supporting integration and test planning, performing risk assessments, and providing inputs for design reviews.

RESPONSIBILITIES

The Systems Engineering team supports multiple programs and disciplines. We are seeking talented, flexible engineers a desire to learn varying skillsets. As a member of this team, you may:

• Collaborate with internal teams to define and document mission objectives, system requirements, and operational concepts.
• Support requirements traceability and verification planning
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Support system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Prepare detailed technical reports, presentations, and documentation for internal and external stakeholders, including government agencies and customers.
• Develop system-level integration and verification plans, conducting end-to-end testing to validate mission requirements.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Conduct system performance analysis, including reliability, safety, and mission effectiveness, under various environmental conditions.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Identify and analyze mission risks related to complex space missions, including collision risks and operational uncertainties.

QUALIFICATIONS

• 5+ years of applicable experience
• Desire to develop both subsystem domain knowledge and Systems Engineering skills
• Strong analytical and communication skills
• Ability to support cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Experience in design, analysis, and verification on a major aerospace program 
• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions

COMPENSATION

• Base Salary:  $105,000 - $190,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is seeking a highly accomplished Chief Engineer to lead the technical execution of a next-generation space vehicle program. In this role you will play a critical role in defining, analyzing, and ensuring the successful implementation of mission requirements across complex, mission-critical space systems, supporting national defense initiatives, and advancing technologies in autonomous space operations. You will serve as the top technical authority for the vehicle, accountable for engineering performance, risk management, and system integration. You will lead multi-disciplinary teams through design, development, analysis, test, and fielding phases while ensuring the vehicle architecture, requirements, and design decisions align with system-level objectives and mission success criteria. You must impedance match rigor and analysis depth to the maturity and risk posture of the program. You will drive design and technical readiness reviews, technical baseline management, and design assurance.

RESPONSIBILITIES

The Chief Engineer is part of the Systems Engineering team. In addition to the responsibilities above, as a member of this team, you will:

• Have ownership over the technical baseline for the program
• Be accountable for program technical budgets
• Assists program manager in scope, cost, and schedule decisions
• Collaborate with customers, stakeholders, and internal teams to define and document mission objectives, system requirements, and operational concepts.
• Translate customer and mission needs into actionable engineering solutions, ensuring alignment with technical and programmatic constraints.
• Lead system trade studies, performance evaluations, and feasibility assessments to ensure optimal system architecture design.
• Coordinate with subsystem teams to troubleshoot and resolve integration challenges, ensuring mission readiness.
• Support mission operations teams during testing and real-time mission execution.
• Assess mission success criteria and operational risks and propose mitigation strategies.
• Develop mitigation strategies and contingency plans for safe and reliable mission execution.

QUALIFICATIONS

• 15+ years full lifecycle experience, including leading a vehicle through design, test, and verification 
• Strong technical leadership and systems architecture experience
• Proven leadership in design, analysis, and verification on a major aerospace program 
• Strong analytical and communication skills, with ability to lead technical trades 
• Demonstrated ability to balance technical rigor with schedule and program realities 
• Strong systems engineering and technical leadership background across mechanical, electrical, and software domains 
• Strong background in systems engineering practices: requirements, verification, trade studies, interface control, and failure analysis
• Ability to lead cross-functional technical teams and coordinate across hardware and software boundaries
• Bachelors Degree in Mechanical or Aerospace Engineering or related field
• S. Citizen and eligible for DoD TS/SCI or TS/SAP U.S. government security clearance.

PREFERRED SKILLS AND EXPERIENCE

• Advanced degree in Aerospace, Mechanical, or Systems Engineering
• Strong track record leading cross-functional engineering teams and managing design-to-delivery cycles 
• Demonstrated expertise with Model-Based Systems Engineering (MBSE)
• Background in range certification, test readiness reviews, and safety boards
• Active TS/SCI clearance
• Experience in defense or classified space missions.
• Familiarity with U.S. Department of Defense (DoD) and NASA mission standards and processes
• Experience working with government agencies, primes, or subcontractors on space missions. 

COMPENSATION

• Base Salary:  $210,000-$355,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this a fully onsite position based out of our Centennial, CO office.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a senior to principal-level technical leader, to architect spacecraft-wide harness solutions that span multiple programs, teams, and vehicle configurations. You will define the standards, conventions, and automation strategies that enable rapid, reliable harness design and integration across the organization. You are accountable for program-level delivery outcomes — not just the quality of individual designs, but the consistency, scalability, and velocity of harness engineering across True Anomaly's portfolio. You will build reusable patterns and tooling that multiply the effectiveness of every harness engineer on the team, coach engineers across organizational boundaries, and shape cross-org alignment on technical direction. This role requires someone who thinks in systems, builds for scale, and leads through influence rather than authority.

RESPONSIBILITIES

• Architect spacecraft-wide electrical harness standards and interface conventions across programs; ensure consistent application of grounding, shielding, EMC isolation, and signal integrity practices at the vehicle level for all programs and vehicle lines.
• Define spacecraft-level routing rules and mechanical interface standards that integrate harness layouts across full spacecraft configurations, including deployable and multi-module assemblies that resolve competing constraints across thermal, mechanical, electromagnetic, and operational domains.
• Oversee supply chain and manufacturability strategies for flight harnesses; collaborate with procurement and manufacturing to ensure part availability, cost efficiency, and production scalability.
• Define corporate design-for-manufacture philosophies and reliability standards for harness assemblies; collaborate with industry suppliers on material innovation, process improvement, and next-generation connector and cabling technologies to standardize harness build and verification processes across programs.
• Ensure cross-discipline consistency in standards and configurations across electrical, mechanical, thermal, and avionics domains; serve as the integrating authority for harness-related interfaces.
• Create automation tools for rapid harness design and validation — reducing manual effort, catching errors earlier, and enabling faster iteration across the design cycle.
• Build reusable design patterns and scalable solutions that become organizational assets; codify durable practices that outlast individual programs.
• Shape company narratives on harness engineering direction and technical investment; influence executive leadership on strategic priorities, technology bets, and organizational capability development.
• Coach and mentor developing harness engineers across teams; build collaboration across organizational boundaries and grow the next generation of senior technical talent.
• Embed True Anomaly's values into cross-org delivery practices; serve as a visible role model for trust, accountability, and principled engineering judgment while setting the cultural tone for how teams collaborate and hold themselves accountable.
• Anticipate architectural trade-offs before they become problems; proactively identify risks across programs and drive mitigation strategies that protect schedule and mission assurance across programs.
• Shape the leadership bench for harness engineering; grow senior technical talent, define career development pathways, and influence enterprise engineering culture through visible leadership and principled decision-making.

QUALIFICATIONS

• Bachelor's degree in electrical, mechanical, or related engineering discipline; advanced degree preferred.
• 8+ years of professional experience in spacecraft or aerospace harness engineering, with demonstrated progression into multi-program architectural leadership.
• Proven track record of defining spacecraft-wide harness standards, interface conventions, or design automation tools adopted across multiple programs or vehicle lines.
• Deep expertise in EMI/EMC, grounding architecture, signal integrity, and system-level verification strategies for flight harness systems.
• Experience architecting harness layouts that integrate across full spacecraft configurations, including complex routing, multi-module assemblies, and deployable elements.
• Demonstrated accountability for program-level delivery outcomes spanning multiple teams and workstreams.
• Experience defining or standardizing verification and validation processes, reliability standards, or derating guidelines used across an organization.
• Track record of building reusable tooling, templates, or automation that measurably improved design velocity or quality across teams.
• Experience overseeing supply chain and manufacturability strategies for flight harness hardware.
• Strong ability to coordinate across teams, influence without authority, and shape technical alignment in cross-organizational settings.
• Experience coaching and developing engineers at multiple career levels; demonstrated investment in growing senior technical talent.
• Excellent written and verbal communication skills, including experience shaping cross-org alignment and maintaining composure and clarity under program pressure and influencing executive leadership on technical strategy, investment priorities, and organizational direction.
• Willing to travel up to 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience developing harness design automation tools or workflows (e.g., scripted routing validation, automated BOM generation, CAD-integrated design rule checking).
• Experience with SolidWorks Electrical and Routing and/or NX/Teamcenter at the multi-program or enterprise level.
• Familiarity with Model-Based Systems Engineering (MBSE) approaches for managing harness interfaces and configurations at scale.
• Experience leading or defining spacecraft-level EMC qualification campaigns across multiple vehicle programs.
• Hands-on experience establishing or governing approved parts lists, materials standards, or corporate design guidelines for harness assemblies.
• Experience contributing to industry standards bodies or working groups related to spacecraft harnessing, EMC, or electrical integration (e.g., IPC, SAE, AIAA).
• Prior involvement in mission assurance boards, design certification reviews, or flight readiness processes at the program level.
• Experience shaping engineering culture, onboarding practices, or technical mentorship programs within a growing organization.

COMPENSATION

• Base Salary Senior: $135,000-$220,000
• Base Salary Staff: $155,000- $265,000
• Base Salary Principal: $180,000- $310,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Centennial or Long Beach. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 4+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

• III Base Salary: $105,000 - $170,000
• Senior Base Salary: $135,000 - $220,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

RESPONSIBILITIES

• Own all aspects of Guidance, Navigation, and Control (GNC) system development for missile systems, including architecture definition, algorithm design, verification, hardware integration, flight test support, and operational deployment.
• Design, test, and validate GNC flight software and embedded algorithms for missiles operating across multiple flight regimes and environmental conditions.
• Develop and maintain navigation and state estimation algorithms, including sensor fusion frameworks (e.g., EKF, UKF, particle filters) integrating IMU, GPS/INS, seeker data, and other sensor modalities to provide high-rate, high-accuracy state estimates throughout the engagement timeline.
• Develop guidance laws (proportional navigation, augmented PN, optimal guidance) and autopilot designs; implement them in flight software; verify performance and robustness through high-fidelity 6-DOF simulation, Monte Carlo analysis, hardware-in-the-loop testing, and flight test correlation.
• Design, implement, and maintain high-fidelity simulation environments capturing aerodynamics, propulsion, atmospheric effects, target dynamics, sensor models, and actuator dynamics for SIL, HIL, and mission analysis across the full flight envelope.
• Utilize frequency-domain and time-domain control analysis techniques to ensure stability margins.
• Develop terminal guidance algorithms for intercept of maneuvering targets, including target tracking, aimpoint selection, miss distance prediction, time-to-go estimation, and endgame steering logic.

QUALIFICATIONS

• Bachelor's degree in aerospace engineering, mechanical engineering, electrical engineering, physics, or related field
• 5+ years of relevant GNC engineering experience in the aerospace and defense industry, preferably with tactical missile systems, interceptors, or guided munitions
• Coursework or project experience in flight dynamics, aerodynamics, control systems, and state estimation
• Strong understanding of physics, rigid body dynamics, intercept geometry, proportional navigation, and real-time software development principles
• Experience with C++ and/or Python for algorithm development, numerical methods, real-time control, or simulation
• Familiarity with missile GNC concepts including guidance laws, autopilot design, sensor fusion, inertial navigation, seeker operation, and aerodynamic/thrust vector control
• Exposure to filtering and estimation methods (e.g., Kalman filters, complementary filters, INS/GPS integration) through internships, coursework, or projects
• Ability to build, test, and debug flight software, real-time control systems, and simulation tools
• Strong analytical skills with emphasis on dynamics, controls, and numerical methods; ability to work effectively in a fast-paced, multidisciplinary engineering environment
• Demonstrated ability to take ownership of complex technical problems and drive solutions from concept through flight test
• Ability to obtain and maintain TS/SCI US government security clearance

PREFERRED SKILLS AND EXPERIENCE

• Master's degree or PhD in aerospace engineering, control systems, or equivalent discipline
• Experience with terminal guidance algorithms, proportional navigation variants, optimal guidance theory, or modern guidance techniques
• Experience developing autopilot designs for agile missiles including gain scheduling, adaptive control, or nonlinear control methods
• Experience with INS/GPS integration, sensor calibration, alignment algorithms, and error budget analysis
• Experience with aerodynamic modeling, CFD correlation to flight data, or aeroservoelastic analysis
• Experience developing and executing hardware-in-the-loop test campaigns with flight representative GNC hardware
• Flight test experience including test planning, instrumentation selection, telemetry analysis, and flight data reconstruction
• Experience with intercept kinematics, target tracking, miss distance analysis, and covariance propagation
• Experience performing line-of-sight stability analysis including jitter, noise rejection, and seeker tracking performance
• Hands-on experience with GNC hardware integration, sensor characterization, and actuator calibration
• Familiarity with missile-specific tools and standards (e.g., MISSILE DATCOM, MIL-STD-1553, MIL-STD-1760)
• Active TS/SCI clearance with Polygraph

COMPENSATION

• Base Salary: $115,000 - $290,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is an onsite position, Successful candidates will be located near Denver, CO or Long Beach, CA 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.

#LI-Onsite

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 2+ years of professional experience with harnessing design and routing.
• Ability to maintain or obtain TS//SCI Clearance
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software.
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

• Base Salary: $85,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for you, a creative and experienced engineer, to develop and design harness assemblies and harness routing on spacecraft and test setups. Designs will interconnect the electronics and power subsystem within the spacecraft. Interconnected systems include power, propulsion, guidance and navigation, data and telemetry. The harnessing design and implementation are a crucial part of the spacecraft system.

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering.
• 2+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

COMPENSATION

•  Base Salary: $85,000-$135,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Ability to maintain or obtain TS//SCI clearance
• Work Location—this role will be onsite at our Centennial, CO location.
• Work environment—is in a standard office, working at a desk or in a production factory.
• Physical demands—the physical demands of the job may include frequent standing, sitting, walking, bending, and lifting or carrying items up to 20lbs.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

True Anomaly is looking for a creative Principal Thermal Engineer to develop new spacecraft. In this role you will work with a multi-disciplinary product team to rapidly develop and produce new space systems. 

RESPONSIBILITIES

• Lead large, high-priority, cross-functional thermal architecture decisions that have significant impact on spacecraft design, mission success, and company growth 
• Serve as the principal thermal advisor and subject matter expert across multiple spacecraft programs, providing authoritative guidance on complex or critical thermal challenges 
• Define thermal design philosophy, standards, and best practices to be adopted across programs and lower-level engineering teams 
• Develop and own integrated thermal analysis frameworks covering heater/radiator sizing, external coatings, and thermal control architectures across a variety of design reference missions (DRMs) 
• Lead thermal interface coordination across all subsystems and guide multidisciplinary teams in resolving critical thermal integration issues 
• Lead and provide technical direction for Thermal Vacuum and Thermal Cycle test programs, including model correlation strategy 
• Support and advise on-orbit operations, bringing principal-level expertise to anomaly resolution and mission sustainment 
• Contribute to company-level technical direction, participating as a stakeholder in shaping engineering roadmaps and organizational priorities 

QUALIFICATIONS

• Bachelor's degree in mechanical engineering with training in analysis of structures and fluids; advanced degree strongly preferred (see below) 
• 15+ years of professional experience in space thermal analysis and control (or 12+ years with a Master's degree, or 8+ years with a PhD) 
• Demonstrated mastery of thermal vacuum testing, analysis, and model correlation across multiple complex spacecraft programs 
• Proven track record of leading and resolving critical thermal challenges on high-priority, cross-functional programs with significant business impact 
• Deep thermal expertise across a broad range of spacecraft subcomponents including optical payloads, mechanisms, structures, propulsion, and electronics 
• Expert-level proficiency in Thermal Desktop, SolidWorks, and related thermal/structural analysis tools 
• Demonstrated ability to define and drive thermal engineering standards, methodologies, and best practices at an organizational level 
• Demonstrated history of working autonomously at a strategic level, shaping requirements and direction rather than receiving them 
• Exceptional written and verbal communication skills, with experience presenting to senior leadership and external stakeholders 
• Strong accountability mindset — owns outcomes across programs, drives balanced technical solutions to closure with urgency, and sets the standard for engineering excellence 
• Passion for the space industry and a commitment to advancing the state of the art in spacecraft thermal design 

PREFERRED SKILLS AND EXPERIENCE

• Master's degree or PhD in aerospace, mechanical, or a related engineering discipline 
• Experience leading thermal engineering efforts on programs from concept through on-orbit operations 
• Background in new space or rapid-development environments where thermal designs must be developed under aggressive schedules and resource constraints 
• Experience in aero-heating and TPS design is a plus 
• Experience mentoring and technically developing senior and staff-level engineers 
• Familiarity with TS//SCI clearance requirements and experience operating in classified program environments 
• Prior experience as a principal technical advisor or chief engineer on a spacecraft program 

COMPENSATION

• Base Salary:  $185,000 - $315,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—Successful candidates will be located near Denver. 
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite 

YOUR MISSION

Software is the central nervous system for True Anomaly's engineering and product thesis. Software bridges the gap between military objectives, theoretical physics, and the human and autonomous control of spacecraft and ground systems. True Anomaly is seeking a Spacecraft Simulation Software Engineer to contribute to the continuing evolution of our spacecraft, constellation modeling, and simulation software with a focus on multi-physics, high-fidelity simulation.

You will work in a fast-paced, interdisciplinary team to identify, develop, and deliver algorithms for modeling complex coupled physics including 6-degree-of-freedom (6DOF) rigid body dynamics, thermal systems, attitude dynamics and control, power systems, propulsion, and their interactions. This role focuses on building the simulation infrastructure that enables engineers to design spacecraft, validate control algorithms, analyze system performance, and predict mission outcomes with high confidence.

RESPONSIBILITIES

• Write well-structured, efficient code using modern C++ best practices (C++ 17 / C++ 20), with a particular emphasis on performance and maintainability
• Develop and maintain multi-physics simulation libraries for spacecraft systems modeling including:
  • 6DOF rigid body dynamics with environmental perturbations (gravity gradient, solar radiation pressure, atmospheric drag, magnetic torques)
  • Thermal modeling including conduction, radiation, and solar heating
  • Attitude dynamics and control system simulation
  • Propulsion system modeling (thrusters, tanks, mass properties)
  • Power generation and distribution (solar arrays, batteries, loads)
  • Sensor and actuator models (reaction wheels, star trackers, gyros, magnetometers, thrusters)
• Implement coupled physics algorithms that capture interactions between subsystems (thermal-structural, power-thermal, propulsion-dynamics, etc.)
• Design and implement time-stepping algorithms, solver architectures, and integration schemes for real-time and faster-than-real-time simulation
• Maintain libraries that provide APIs in multiple languages (Python, C++) to other applications within True Anomaly
• Work with other internal teams who leverage our simulation APIs to plan and execute missions, develop advanced algorithms for spacecraft operation, and perform trade-space analyses
• Participate in code reviews, architectural discussions, and sprint planning sessions to maintain high standards of software quality and adherence to project timelines

QUALIFICATIONS

• Bachelor's degree in aerospace engineering, mechanical engineering, computer science, physics, a similar discipline, or relevant experience
• 1-3 years of professional experience in C++
• Experience with the Python programming language for scripting and prototyping applications
• Strong understanding of object-oriented software development practices
• Ability to understand new challenges quickly, formulate a plan, get buy-in, and execute
• Understanding of complex distributed systems, and how the components you design and deliver will fit into those larger systems
• Excellent problem-solving skills and attention to detail
• U.S. Citizen and eligible for DoD Secret or TS/SCI clearance

PREFERRED SKILLS AND EXPERIENCE

• Experience developing physics-based modeling and simulation environments (i.e., modeling spacecraft dynamics, thermal systems, or control algorithms)
• Knowledge of numerical methods:
  • ODE solvers and integration schemes (Runge-Kutta, etc.)
  • Numerical linear algebra and matrix computations
  • Sparse matrix techniques
• Experience with spacecraft subsystems:
  • Attitude determination and control systems (ADCS)
  • Guidance, navigation, and control (GNC)
  • Thermal control systems
  • Electric power systems (EPS)
  • Propulsion systems
• Understanding of coordinate frames and transformations (ECI, ECEF, body frame, etc.)
• Experience with quaternion mathematics and rotation representations
• Knowledge of orbital mechanics and perturbation forces
• Familiarity with model validation, verification, and uncertainty quantification
• Experience with version control systems (Git) and CI/CD pipelines

COMPENSATION

• Base Salary: $120,000 - $200,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is a fully onsite role. Candidates must be based in or able to commute to our Denver or Long Beach office daily.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.

#LI-Onsite

YOUR MISSION

As a member of the Applied Algorithms and Autonomy team, you will design, build, and deploy core autonomy capabilities for True Anomaly. You will work with a talented cross-functional team to advance technology at the intersection of artificial intelligence, machine learning, and classical optimization. This will involve hands-on development across various areas including vehicle autonomy, mission planning, wargaming, threat assessment, and uncooperative RPO capabilities. You are a first principles engineer who takes ownership of the systems you build and delivers results. 

RESPONSIBILITIES

• Design, implement, and test algorithms that enable autonomous mission planning, tasking, and decision-making 
• Contribute to autonomy architecture discussions and implement robust solutions informed by statistical analysis, software testing, and hardware-in-the-loop simulation 
• Collaborate with cross-functional teams to translate requirements and stakeholder expectations into production-ready autonomy solutions 
• Debug and tune autonomy systems through integration, testing, and deployment in real-world operational environments 
• Write clean, well-documented, and testable code in support of autonomy capabilities 

QUALIFICATIONS

• Bachelor's degree in computer science, robotics, aerospace engineering, electrical engineering, or a similar discipline 
• Proficient in C/C++ and Python 
• Strong understanding of at least one of technologies within the four pillars: 
  • Adversarial planning: classical game theory, self-play, counterfactual regret minimization, Monte Carlo tree search, behavior trees, etc. 
  • Classical optimization: MPC, trajectory optimization, dynamic programming, stochastic control, mixed integer programming, quadratic programming, etc. 
  • ML/AI: reinforcement learning, imitation learning, transformer architectures, anomaly detection, classification/regression, behavior modeling, etc. 
  • Multi-Agent Control: multi-agent coordination, consensus algorithms, networked control systems, communication-aware planning, fault detection & isolation 
• Solid foundation in statistics, optimization, and decision-making under uncertainty 
• 4+ years of experience implementing algorithms to support autonomous planning and decision-making deployed in real-world systems 
• Demonstrated ability to work in a multidisciplinary team and solve complex problems with first principles approaches 
• Passion for spaceflight and advancing capabilities related to space domain awareness and space security 

PREFERRED SKILLS AND EXPERIENCE

• Master's or PhD in computer science, robotics, aerospace engineering, electrical engineering, or a similar discipline 
• Experience writing high-reliability, production C/C++ code 
• Experience with edge computing and real-time processing constraints 
• Experience with space systems (orbital mechanics, GNC, spacecraft operations) 
• Familiarity with probabilistic reasoning, state estimation (EKF/UKF, particle filters), and planning under uncertainty 
• Background in verification/validation of autonomous systems for certification or operational deployment 
• A understanding of how game theory, optimization and AI can be fused together.

COMPENSATION

• Base Salary: $170,000 - $290,000
• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—This is a fully onsite role. Candidates must be based in or able to commute to our Denver or Long Beach office daily.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

YOUR MISSION

RESPONSIBILITIES

• Lead the analysis and validation of spacecraft and/or Space Based Interceptors to ensure survivability and performance under dynamic environments, including launch, on-orbit, and mission operations.
• Perform detailed structural dynamics analyses, including modal, harmonic, random vibration, shock, and transient response simulations.
• Develop documentation and best practices across engineering team including modeling tools, process documentation, and analysis templates.
• Develop and validate finite element models (FEMs) of spacecraft and/or missile structures and subsystems, ensuring accuracy in predicting dynamic behavior.
• Define and lead dynamic testing campaigns, including vibration, shock, and acoustic testing, to verify structural integrity and correlate models with test results.
• Collaborate with cross-functional teams, including mechanical, thermal, and systems engineering, to ensure dynamic requirements are integrated into the design process.
• Provide expertise in structural dynamics during trade studies, design reviews, and critical decision-making processes.

QUALIFICATIONS

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field.
• 12+ years of experience in structural dynamics analysis for aerospace, defense, or high-reliability applications.
• Proficiency in finite element analysis (FEA) tools such as FEMAP/NASTRAN or HyperWorks/OptiStruct.
• Experience in spacecraft and/or missile defense dynamic environments, including launch loads, aero loads, vibration, and shock.
• Strong understanding of structural mechanics, fracture mechanics, material properties, and failure modes in aerospace applications.
• Hands-on experience with environmental testing, including random, sine, and sine burst vibration