NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

PROPULSION ASSEMBLY TECHNICIAN II/III - B SHIFT 

Based out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Assembly Technician is responsible for building sub-assemblies for the Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. 

(Please note: this position can be hired at the Propulsion Assembly Technician II or Propulsion Assembly Technician III level)

WHAT YOU'LL GET TO DO:

• Work on a high caliber cross functional team
• Test rocket hardware
• Build turbo pumps and rocket engines.
• Watch the hardware you build make fire and go to space.

YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN II:

• 2+ years of mechanical assembly experience in aviation, aerospace, or similar industry
• Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)
• Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)
• High school diploma or GED.

YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN III:

• 5+ years of mechanical assembly experience in aviation, aerospace, or similar industry
• Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)
• Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)
• High school diploma or GED.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 8+ years of mechanical assembly and/or mechanical fitting experience
• Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak). .
• A&P, trade, or industry certified.
• Experience with in-space mechanical assemblies preferred.
• Knowledgeable in manufacturing processes and continued product development.

ADDITIONAL REQUIREMENTS 

• Willing to work Monday - Thursday 3:15pm - 1:45am
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position 
• Able to lift up to 25lbs. unassisted 
• Must be able to climb ladders and be comfortable working in tight spaces. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces  

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

CNC MACHINIST III / SENIOR - B SHIFT

Based out of Rocket Lab Headquarters in Long Beach, California the CNC Machinist III / Senior will maintain, set up and operate the CNC machines to build flight-ready hardware that meet Rocket Lab specification at the needed rate. 

WHAT YOU’LL GET TO DO: 

• Work with CNC lathe and mill machines
• Read and translate drawings/CAD models
• Provide feedback to improve work instructions
• Work with CNC programmer to maintain tolerances
• Work to reduce any non-conformances found by quality or engineering.
• Provide improvement ideas on batch sizes, setups, tool selection etc.
• Track calibration and maintenance of all equipment and tooling in the area.

(This position can be hired as a CNC Machinist III /Senior Level)

YOU'LL BRING THESE QUALIFICATIONS AS A CNC MACHINIST III:

• 5+ years of experience with CNC operation on lathe and mills
• Demonstrated ability using Lathes: Dual Spindle (Live Tooling)
• Demonstrated ability using Mills: Turning 5th Axis.
• Demonstrated ability to interpret drawings, GD&T

YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR CNC MACHINIST:

• 8+ years of experience with CNC operation on lathe and mills
• Demonstrated ability using Lathes: Dual Spindle (Live Tooling)
• Demonstrated ability using Mills: Turning 5th axis
• Demonstrated ability to interpret drawings, GD&T.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• CNC programming experience - NX Programming
• Experience in an Aerospace Manufacturing Environment
• 5-axis CNC operation and setup
• Competent navigating DMG Mori Machines: DMU 50,85,125, NLX 2500-4000
• Experience using Siemens, Fanuc and Celos Controls
• Experience using bar feeders
• Manual Programming

ADDITIONAL REQUIREMENTS: 

• Willing to work B Shift (Monday – Thursday 3:15pm - 1:45am) 
• Ability to travel and communicate outside of work hours
• Must be able to work extended hours and/or weekends as needed
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min  
• Must be able to lift up to 25lbs. unassisted. 

#RL1

GNC ENGINEER II/ SENIOR GNC ENGINEER I - MISSION FORMULATION

Based out of Rocket Lab’s site in Littleton, CO, the GNC Engineer II/ Senior GNC Engineer I - Mission Formulation is responsible for Guidance Navigation and Control (GNC) design, modeling, analyses, and testing for Rocket Lab launches and missions. You'll play an integral part of Rocket Lab’s Global Launch Services (GLS) Mission Formulation Team, which works closely with other Engineering teams and Production to bring new launch and mission concepts to life. 

As part of the Mission Formulation team, you'll be responsible for conducting trades studies, preliminary and final mission analyses, and definition and implementation of detailed designs for Rocket Lab’s launch programs. This team is also primarily responsible for the formulation and implementation of launches and missions for classified missions on HASTE and Electron launch vehicles. 

Success in this position will be measured by the value of the knowledge and experience in launch vehicle design and mission experience that you bring into this role, your ability to contribute to projects without supervision, successful collaboration with other teams across Rocket Lab, and the skillful prioritization of competing engineering projects across the group. 

WHAT YOU’LL GET TO DO:

• GNC contact to Business Development for proposals and mission definition 
• Launch and mission operational concept development 
• Orbital and suborbital trajectory design and analysis 
• Work with external stakeholders and customers for mission-specific requirements engineering 
• Document proposed GNC solutions and participate in design reviews with customers 
• Support hardware-in-the-loop (HITL) testing to verify trajectories, GNC, and flight code performance 
• Conduct Monte Carlo simulation analyses to define and verify launch and mission operations 
• Develop and support release of flight code for pre-launch ground testing, launch, and mission operations 
• Develop tools and processes for automating common GNC modelling and analysis tasks 

(Please note: This position can be hired at the GNC Engineer II or Senior GNC Engineer I level.)

YOU’LL BRING THESE QUALIFICATIONS AS GNC ENGINEER II: 

• Bachelor’s degree and 2+ years of industry experience in GNC/ADCS
• Understanding of orbital mechanics and/ or closed-loop control systems, preferably launch vehicles
• Experience with trajectory optimization
• Proven experience developing real-time control and/or estimation algorithms in autonomous vehicles, preferably launch vehicles
• Active Secret security clearance OR Ability to obtain and maintain one

YOU’LL BRING THESE QUALIFICATIONS AS SENIOR GNC ENGINEER I:

• Bachelor’s degree and 5+ years of industry experience in GNC/ADCS
• Understanding of orbital mechanics and/ or closed-loop control systems, preferably launch vehicles
• Experience with trajectory optimization
• Proven experience developing real-time control and/or estimation algorithms in autonomous vehicles, preferably launch vehicles
• Active Secret security clearance OR Ability to obtain and maintain one

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Active TS/SCI clearance
• Experience with requirements assessments and interface control document generation
• Experience with git version control.
• 3+ years’ experience in modelling, simulation and/or control of dynamics systems, particularly rigid bodies
• 3+ years’ experience with Python development
• 3+ years’ experience with data analysis using MATLAB and/or SciPy
• Experience developing in C/C++
• Experience with ASTOS or similar mission analysis, trajectory optimization, vehicle design and simulation tools
• Strong communication skills, with the ability to build strong working relationships
• Creative, analytical, and good at problem solving
• Ability to work on own initiative and to plan daily workflow to meet higher level tasks

ADDITIONAL REQUIREMENTS:

• Must hold an active security clearance, or be willing to obtain one upon hire
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together and are critical to our success.  

FULFILLMENT PLANNER I 

Based on site at our Rocket Lab Headquarters in Long Beach, CA, the Fulfillment Planner plays a critical role in ensuring the smooth flow of materials for production, focusing on tactical execution rather than strategic sourcing. This role requires strong organizational, technical, and communication skills to manage purchase orders, purchase schedules, and supplier relationships while ensuring alignment with production needs and company goals. It is ideal for individuals with experience in material planning and procurement in fast-paced manufacturing environments.   

WHAT YOU’LL GET TO DO: 

• Create, Modify and Manage purchase orders and purchase schedules for production products, ensuring accuracy and alignment with production needs. 
• Maintain purchase order and purchase schedule data within ERP systems. 
• Ensure order acknowledgments are received directly from suppliers or via supplier portals. 
• Monitor and ensure on-time delivery of purchased items, escalating delays or issues to the Strategic Sourcing and Quality teams. 
• Ensure purchased items are to the latest revision and meet engineering and quality requirements. 
• Manage obsolete and end-of-life products to prevent unusable inventory. 
• Maintain positive relationships with suppliers to ensure smooth communication and collaboration. 
• Escalate cost or quality concerns to the Strategic Sourcing and Quality teams for resolution. 
• Ensure demand, supply, and fulfillment planning aligns with production schedules. 
• Update demand to accommodate engineering change orders and communicate changes to suppliers. 
• Provide visibility into material positions using tools such as material shortage reports, clear-to-build reports, and line of balance reports. 
• Work closely with production, engineering, quality, and supply chain teams to ensure alignment with company-wide goals. 
• Communicate material status and updates to relevant stakeholders. 
• Maintain accurate bill of materials (BOM), parts, and master data within ERP systems. 
• Ensure compliance with company policies and procedures related to procurement and material planning. 

YOU'LL BRING THESE QUALIFICATIONS: 

• 2+ years of experience and a bachelor’s degree, or equivalent years of work experience (6+ years total work experience).
• Proficiency in ERP and MRP systems for managing purchase orders, purchase schedules, and material planning. 
• Proven knowledge of material planning fundamentals, including master data management, BOM management, and planning release and fulfillment. 
• Ability to produce material line of balance reports and conduct clear-to-build reviews. 
• Proficiency in MS Office, math, and statistics for data analysis and reporting. 

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Bachelor’s degree in engineering, business, supply chain, or other relevant fields. 
• 5+ years of related experience as a Material Planner, Buyer, or equivalent role. 
• Strong organizational and problem-solving skills, with the ability to prioritize effectively and efficiently. 
• Team-oriented, with the ability to multitask and work in a fast-paced environment with multiple deadlines. 
• Excellent verbal and written communication abilities. 
• Prior experience in aerospace, EV automotive, or other disruptive manufacturing industries. 
• Familiarity with AS9100 standards and US export controls (ITAR and EAR). 
• Ability to read and interpret engineering drawings. 
• Experience in managing obsolete and end-of-life products.

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

ADDITIVE MANUFACTURING TECHNICIAN I/II - B SHIFT

Based onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician II is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford & Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors.

This opening is for B Shift Monday - Friday from 1pm-9:30pm PST. 

WHAT YOU'LL GET TO DO:

• Uphold and follow all Additive safety measures – be an advocate for safe operations.
• Prepare additive print jobs for success through attention to detail on setups.
• Operate a variety of metal 3D printers, experience with EOS, SLM, & DMG preferred.
• Identify and troubleshoot mechanical, optical laser, electrical, and build issues.
• Conduct calibration of 3D Printers and interpret findings with Engineering.
• Ensure conformance of part/build through independent inspection and print detail verification.
• Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found.
• Perform daily, weekly, and monthly preventative maintenance – as directed by Engineering.
• Provide process improvement feedback and implement solutions in collaboration with Engineering.
• Collaborate with Engineers on setup and fabrication of 3D prints and new hardware.
• Kick off issue tickets based on process/product non-conformances.
• Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department.
• Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection.

(Please note: this position can be hired at the Additive Manufacturing Technician I or Additive Manufacturing Technician II level)

YOU'LL BRING THESE QUALIFICATIONS AS AN ADDITIVE MANUFACTURING TECHNICIAN I:

• 1+ years of experience in manufacturing, fabrication, assembly or testing environment.
• Proficient in hand, power, and pneumatic tools such as drills, chisels, taps.
• Proficient in inspection methods: surface plate, calipers, micrometers, height gauge.
• Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts.
• High School diploma or GED

YOU'LL BRING THESE QUALIFICATIONS AS AN ADDITIVE MANUFACTURING TECHNICIAN II:

• 2+ years of experience in a manufacturing, fabrication, assembly or testing environment.
• Proficient in hand, power, and pneumatic tools such as drills, chisels, taps.
• Proficient in inspection methods: surface plate, calipers, micrometers, height gauge.
• Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts
• High School diploma or GED.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles.
• Experience interpreting engineering drawings.
• Experience using JIRA.

ADDITIONAL REQUIREMENTS:

• Ability to work the following shift, Monday-Friday 1pm-9:30pm PST. 
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position 
• Able to lift up to 25lbs. unassisted 
• Must be able to climb ladders and be comfortable working in tight spaces. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min 

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

QUALITY INSPECTOR III - MECHANICAL

Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector III - Mechanical is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.

WHAT YOU’LL GET TO DO:

• Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies.
• Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM.
• Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system.
• Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process.
• Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones.
• Embody a Built in Quality philosophy, consistently detecting non-conformance (Don’t accept a Defect – Don’t Pass a Defect) and preventing escapes to downstream customers.

YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR III - MECHANICAL:

• 5+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment.  
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• High school diploma or GED

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Experience in space manufacturing in-process environment on engine builds
• Experience with precision measuring equipment such as comparator, romer arm,  Keyence Vision System, and/or CMMs (PC-DMIS)
• Experience performing visual inspections using borescope
• High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc.
• Inspection experience with aerospace components & assemblies
• Experience working with Enterprise Resource Planning (ERP) systems

ADDITIONAL REQUIREMENTS: 

• Ability to work one of the following shift:
  • 5:00AM – 3:30PM Monday– Thursday
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus  
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

QUALITY INSPECTOR III - MECHANICAL

Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector III - Mechanical is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.

WHAT YOU’LL GET TO DO:

• Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies.
• Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM.
• Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system.
• Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process.
• Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones.
• Embody a Built in Quality philosophy, consistently detecting non-conformance (Don’t accept a Defect – Don’t Pass a Defect) and preventing escapes to downstream customers.

YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR III - MECHANICAL:

• 5+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment.  
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• High school diploma or GED

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Experience in space manufacturing in-process environment on engine builds
• Experience with precision measuring equipment such as comparator, romer arm,  Keyence Vision System, and/or CMMs (PC-DMIS)
• Experience performing visual inspections using borescope
• High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc.
• Inspection experience with aerospace components & assemblies
• Experience working with Enterprise Resource Planning (ERP) systems

ADDITIONAL REQUIREMENTS: 

• Ability to work one of the following shift:
  • 3:15PM – 1:45AM Monday– Thursday
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus  
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

SENIOR WELD ENGINEER

Rocket Lab is seeking an experienced Senior Weld Engineer to be based at our Engine Development Center in Long Beach, CA. This role will work under the direction of the Materials & Processes Department to lead the development, qualification, implementation, and continuous improvement of many welding processes used in the production of the Archimedes Engine for Neutron. This candidate shall be the main technical point of contact for all welding-related production issues and shall interface frequently with Manufacturing engineering teams to resolve these issues.

WHAT YOU'LL GET TO DO:

• Develop and implement procedures and process improvements for all welding activities used in the production of the Archimedes Engine.
• Author welding process specifications and PQR’s for each welding process on the Archimedes Engine.
• Define welding acceptance criteria in accordance with AWS D17.1 and other relevant NASA standards.
• Improve welding processes by conducting root cause analyses on weld related nonconformances.
• Provide expert guidance on weld repair rework, repair, and dispositioning.
• Support production operations on full scale welded assemblies, providing directions to manufacturing engineers and welders on correct techniques in a fast-paced manufacturing environment.
• Work closely with design, tooling, and manufacturing engineers to improve welded designs for manufacturing.
• Develop and execute welding qualification test campaigns and interpret mechanical testing and NDE results.
• General support of M&P related projects.

YOU'LL BRING THESE QUALIFICATIONS:

• Bachelor's degree in engineering or technical discipline
• 5+ years of experience in welding engineering working with TIG, Laser, MIG, or EBEAM for aerospace applications.
• Hands-on fabrication, manufacturing, or testing experience of welded assemblies.

 THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Working experience with Laser Welding, GTAW, GMAW, and Orbital GTAW welding processes with a variety of materials.
• CAD / modeling experienced with SOLIDWORKS, NX
• Experience with X-ray quality structural welding, seal welding, and hard facing overlays.
• Working knowledge of carbon / stainless-steel / Nickel based metallurgy. Familiarity with Copper and Nickel based alloys
• Strong knowledge of metallurgy fundamentals, material specifications, and heat-treatment requirements.
• Tooling design experience for welded assemblies to reduce part distortion and improve part consistency.
• Understanding of weld strength testing methodologies, standards, and data acquisition systems used to make informed welding decisions (ASTM E8, E399, E740, ISO 15653, AWS D17.X, AWS C7.X, thermos-couples, strain gages, etc.)
• Experience with root cause analysis and corrective actions including, but not limited to, optical and SEM fractography/metallography, hardness, chemical analysis, and mechanical testing.
• In depth knowledge of AWS D17.1 and related industry welding codes/standards

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

#RL

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.  

SENIOR SUPPLIER DEVELOPMENT ENGINEER I/II – MECHANICAL

Based out of Rocket Lab's headquarters in Long Beach, CA the Senior Supplier Development Engineer I/II – Mechanical is the primary technical owner of the supply base for a broad portfolio of mechanical hardware. This role is responsible for leading the end-to-end industrialization of suppliers from source selection and process qualification through NPI, PPAP, and production ramp thereby ensuring that every supplier can deliver conforming hardware at rate, on cost, and on schedule.

This is a hands-on, supplier-facing role requiring deep commodity knowledge across mechanical domains including but not limited to Complex Machined Parts, Electro-Mechanical Assemblies, Structural Composites, 3D printing and raw materials. The SDE operates proactively at the intersection of design, manufacturing, procurement, and quality. They are the ultimate internal advocate for supply chain manufacturability and capability.

WHAT YOU’LL GET TO DO:

• Lead end-to-end supplier industrialization for mechanical hardware from source selection and process qualification through NPI, PPAP, and rate production ramp.
• Partner with procurement and engineering to identify, evaluate, and select suppliers based on process capability, quality systems, and capacity across CNC machining, EDM, grinding, additive manufacturing, welding and electro-mechanical assemblies.
• Conduct supplier capability assessments during qualification phases, evaluating tooling maturity, measurement systems, process controls, and workforce qualification against program requirements.
• Lead Design for Manufacturability (DFM) reviews with design engineering at the earliest program stage, providing actionable feedback on feature complexity, datum schemes, tolerance stack-ups, and design characteristics that drive cost or quality risk.
• Own the APQP process at suppliers, driving completion of all quality planning deliverables — process flow, PFMEA, control plan, MSA/GR&R, and dimensional results — on schedule and to the required standard.
• Drive the PPAP program as a production readiness gate; define required submission levels, disposition supplier packages, and ensure process capability (Cpk) is demonstrated on critical and significant characteristics to enable at rate production.
• Lead First Article Inspection (FAI) activities at suppliers and in coordination with internal quality teams; ensure all findings are resolved to closure within project timelines.
• Identify systemic performance gaps; own supplier improvement plans and drive measurable progress against quality, cost, delivery, and capacity targets.
• Lead root cause and corrective action (RCCA) for supplier quality issues and escapes, applying structured problem-solving methods (8D, 5-Why) and validating that corrective actions are robust and sustained across all applicable parts and production lines.
• Apply lean manufacturing and statistical quality tools — including SPC, Cpk trending, and process audits — to drive continuous improvement across the mechanical supply base and eliminate sources of recurring defect.

**(This position can be hired as a Senior Supplier Development Engineer I or Senior Supplier Development Engineer II)**

QUALIFICATIONS YOU’LL BRING AS A SENIOR SUPPLIER DEVELOPMENT ENGINEER I 

• Minimum 5 years’ experience working in a regulated industry Aerospace, Medical, Automotive, Industrial, or similar
• Bachelor's degree in Mechanical, Electrical, or Manufacturing Engineering, or a closely related technical discipline.
• Working knowledge of APQP, PPAP, PFMEA, control plans, MSA, and statistical process capability (Cpk/Ppk).
• Experience conducting DFM reviews and translating design intent into manufacturing and quality requirements.
• Ability to read and interpret engineering drawings, GD&T (ASME Y14.5), and 3D CAD models.

QUALIFICATIONS YOU’LL BRING AS A SENIOR SUPPLIER DEVELOPMENT ENGINEER II 

• Minimum 8 years’ experience working in a regulated industry Aerospace, Medical, Automotive, Industrial, or similar
• Bachelor's degree in Mechanical, Electrical, or Manufacturing Engineering, or a closely related technical discipline.
• Working knowledge of APQP, PPAP, PFMEA, control plans, MSA, and statistical process capability (Cpk/Ppk).
• Experience conducting DFM reviews and translating design intent into manufacturing and quality requirements.
• Ability to read and interpret engineering drawings, GD&T (ASME Y14.5), and 3D CAD models.

WHAT MAKES A GREAT CANDIDATE:

Beyond technical qualifications, we are looking for someone who:

• Owns problems all the way to resolution — doesn't hand off and walk away.
• Is proactive at suppliers, not reactive; identifies risks before they become escapes.
• Can translate complex engineering requirements into clear, actionable supplier expectations.
• Builds genuine working relationships with supplier technical teams and earns trust through competence.
• Communicates with clarity and urgency across internal engineering, procurement, quality, and program management.
• Thrives in a fast-paced, resource-constrained environment and makes high-quality decisions under schedule pressure.
• Brings intellectual curiosity about manufacturing — enjoys spending time on the shop floor understanding how things are made.

ADDITIONAL REQUIREMENTS:  

• Willingness and ability to travel up to 40%, domestically and internationally, sometimes on short notice
• Ability to work extended hours, some nights or weekends when needed
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise  

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

MATERIALS LAB TECHNICIAN II

Based at Rocket Lab's new headquarters in Long Beach, California the Materials Lab Technician II is responsible for supporting the development of various Additive Manufacturing and Composite materials development. This role will support all Additive and Composites processes involved with the Neutron vehicle and Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors.

WHAT YOU'LL GET TO DO:

• Prepares/tests/evaluates/certifies all metallurgical tests required per internal production, customer and/or specification requirements.
• Operate testing equipment such as (but not limited to) Instron tensile frames at cryogenic and elevated temperatures, metallography testing (grind, polish, mount, microscopy), XRF analysis, SEM analysis, and hardness testing.
• Checks test samples for dimensions using precision measuring equipment such as gages, calipers, scales, micrometers.
• Monitors all work to ensure quality standards are maintained and adhered to all specifications and requirements.
• Interfaces with engineering to coordinate testing and test results.
• Maintains lab database with complete lab test results and accuracy.
• Maintains a clean work environment (including assigned storage and cleaning duties) in full compliance with company standards, customer and government regulations.
• Participate and support the internal & external audits and support metallurgical audits
• Ensures the company's commitment to maintain a safe workplace and to protect the environment through the establishment and support of Company policy and adherence to various government regulations.
• Performs other duties, tasks and responsibilities as assigned.
• Program/run lab heat treat oven for test coupons and some production parts.

YOU’LL BRING THESE QUALIFICATIONS:

• 2+ years of metallurgical lab experience or related functions
• High School Diploma or GED Equivalent.
• Demonstrated familiarity with drawings, testing specifications, hand tools, bandsaw, cutoff machine, etc.
• Working knowledge of alloys, e.g., Ni, Cu, and Ti alloys.
• Experience testing carbon composite materials.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Experience with Tensile Testing of Metallic / Composite Material
• Experience with test coupons preparation including cutting, mounting, polishing, and etching
• Experience with Macro and Micro Hardness Testing
• Experience with Optical Microscopy
• Experience with Round Robin Test
• Demonstrated knowledge of quality control, customer and NADCAP requirements.
• Demonstrated interpersonal, organizational, and verbal/written communication skills.

ADDITIONAL REQUIREMENTS 

• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position 
• Able to lift up to 25lbs. unassisted 
• Must be able to climb ladders and be comfortable working in tight spaces. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces  

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

QUALITY INSPECTOR II – MECHANICAL  

Based on-site at our Long Beach, CA facility the Quality Inspector II – Mechanical is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.

WHAT YOU’LL GET TO DO:

• Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies.
• Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM.
• Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system.
• Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process.
• Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones.
• Embody a Built in Quality philosophy, consistently detecting non-conformance (Don’t accept a Defect – Don’t Pass a Defect) and preventing escapes to downstream customers.

YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR II:

• 2+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment.  
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• High school diploma or GED

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Experience in space manufacturing in-process environment on engine builds
• Experience with precision measuring equipment such as comparator, romer arm,  Keyence Vision System, and/or CMMs (PC-DMIS)
• Experience performing visual inspections using borescope
• High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc
• Inspection experience with aerospace components & assemblies
• Experience working with Enterprise Resource Planning (ERP) systems

ADDITIONAL REQUIREMENTS: 

• Ability to work one of the following shifts:
  • 3:15PM - 1:45AM Monday – Thursday
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus  
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

MANUFACTURING  

Rocket Lab’s Manufacturing teams are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware, and are responsible for delivering our projects and missions on time and on budget to our customers.   

MANUFACTURING ENGINEER II / SENIOR – ELECTRON PROPULSION  

Based out of Rocket Lab's Engine Development Center in Long Beach, CA the Manufacturing Engineer is responsible for overseeing process improvements and product revisions as related to the Rutherford rocket engine. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors and investors.   

(Please Note: this position can be hired onto as a Manufacturing Engineer II or Senior Manufacturing Engineer level)

WHAT YOU’LL GET TO DO: 

• Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor signoffs.  

• Interface with the quality team to resolve manufacturing engineering quality responsibilities, and when required, lead problem containment and structured root cause & corrective action investigations.  

• Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance.  

• Lead the continuous improvement process in your area using lean tools and techniques such as 5S.  

• Introduce automation where appropriate and ensure equipment data links directly to MRP and quality systems.  

• Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc.  

• Perform initial Value Stream Mapping Exercises, Method of Manufacture plans, cell design, etc.  
• Implement Factory layouts, Equipment selection, FAT, SAT, and production commissioning.  

YOU’LL BRING THESE QUALIFICATIONS AS A MANUFACTURING ENGINEER II:  

• Bachelor’s degree in mechanical, manufacturing, aerospace or similar engineering discipline  

• 2+ years of professional engineering experience in a highly regulated manufacturing environment  

• Understanding of fluid and structural mechanics fundamentals  
• Knowledge in manufacturing processes for aerospace materials 

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR MANUFACTURING ENGINEER:  

• Bachelor’s degree in mechanical, manufacturing, aerospace or similar engineering discipline  

• 5+ years of professional engineering experience in a highly regulated manufacturing environment  

• Understanding of fluid and structural mechanics fundamentals  
• Knowledge in manufacturing processes for aerospace materials 

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:  

• Master’s degree in mechanical, manufacturing, aerospace or similar engineering discipline  

• 8+ years of manufacturing engineering experience preferably with fluid components during assembly, functional checkouts or qualification testing 

• Strong knowledge of manufacturing processes common to fluid components 

• Experience with assembly & testing of turbomachinery and combustion devices  

• Experience with designing, implementing, and supporting a production line and/or build area  

• Experience with manufacturing processes, including but not limited to TIG, EB and laser welding, heat treating, metal forming, additive manufacturing, CNC machining and precision cleaning  

• Experience transitioning products from design to production as a part of cross-functional team in a fast-paced, iterative design environment  
• Experience performing root cause and corrective action projects and PFMEA / DFMEA of manufacturing processes and products  

ADDITIONAL REQUIREMENTS:  

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   

• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing 

• Must be physically able to commute to buildings  

• Occasional exposure to dust, fumes and moderate levels of noise 

• Availability to work long hours and weekends as needed based on test and launch schedules  

NEUTRON 

Neutron is a medium-lift launch vehicle being developed by Rocket Lab, a publicly traded end-to-end space company. The rocket can deliver the mega constellations of tomorrow, enable interplanetary payloads, and support human spaceflight. As a reusable platform, Neutron will deliver a very cost-effective and reliable launch solution leveraging Rocket Lab’s proven history with Electron – the third most launched rocket, worldwide, in 2024. If you’re interested in joining an incredible team in a fast-paced and rewarding environment, this is your opportunity. 

SENIOR COMBUSTION DEVICES ENGINEER II / PRINCIPAL COMBUSTION DEVICES ENGINEER

Based out of Rocket Lab's headquarters in Long Beach, CA, the Principal/Senior Combustion Devices Engineer will be responsible for the development of one or more combustion devices (preburners, main injectors, thrust chambers assemblies and vacuum nozzles). These devices are an integral portion of the 200,000 lbf Archimedes engine, which operates in a demanding but efficient ox-rich, staged combustion architecture.

In this role, you’ll take ownership of all aspects of a component: design and analysis, manufacturing and test support, and successful flights and subsequent, high-cadence, re-flights. By doing so, you will help propel the Neutron rocket, expanding human capabilities in space and providing value to the company and its shareholders.

Please note: This position can be hired as a Senior Combustion Devices Engineer II or Principal Combustion Devices Engineer Level.

WHAT YOU’LL GET TO DO: 

• Design, analyze, and perform trades studies to achieve programmatic targets. 
• Define requirements, test and flight qualification plans.  
• Work with the interface owners, like turbomachinery and engine systems teams, to make a high-end product that could be iterated fast and seamlessly.
• Work with manufacturing and build engineers to design easily manufacturable, cost-effective, beautiful parts.
• Work with the test and launch teams to interpret data and provide solutions to enable a high cadence – of tests, flights and re-flights. 

AS A SENIOR COMBUSTION DEVICES ENGINEER II, YOU’LL BRING THESE QUALIFICATIONS:

• Bachelor’s degree in an engineering discipline or equivalent 
• 8+ years of combustion device design experience
• In-depth knowledge of combustion and fluid dynamics, heat transfer and structural mechanics. 
• Fundamental understanding of design principals and manufacturing methods.

AS A PRINCIPAL COMBUSTION DEVICES ENGINEER, YOU’LL BRING THESE QUALIFICATIONS:

• Bachelor’s degree in an engineering discipline or equivalent 
• 12+ years of combustion device design experience
• In-depth knowledge of combustion and fluid dynamics, heat transfer and structural mechanics. 
• Fundamental understanding of design principals and manufacturing methods.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Master’s or a PhD.
• Advanced proficiency in NX, ANSYS Mechanical, StarCCM, MATLAB and GD&T.
• Proficiency in niche software like: TDK, ROCCID, PERCORP, CEA, ROCETS.
• Reacting flow CFD.
• Expertise in high-speed data/video analysis in time and frequency domains.
• Experience with designing reusable, propulsively landing rocket engines.
• Experience in an iterative and scrappy development environment. 

ADDITIONAL REQUIREMENTS:

• Must be willing to travel and communicate outside of work hours.
• Must be able to work extended hours and/or weekends as needed. 
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings. 
• Occasional exposure to dust, fumes and moderate levels of noise. 

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

PROPULSION ENGINEER II – ARCHIMEDES ENGINE SYSTEMS

As an Engine Systems Propulsion Engineer, you will play a critical role in the development, testing, and operation of the Archimedes Engine family, a cornerstone of the Neutron rocket program. This highly technical role involves ownership of engine subsystems, test campaigns, data analysis, and refining designs for reliability and vehicle operations, while driving system architecture trades, managing interfaces, and optimizing requirements for the vehicle.

Success requires strong autonomy, technical expertise, curiosity, attention to detail, and the ability to organize complex systems into actionable plans while collaborating across teams. You will also support engine analysis, simulation, testing, and tool development, bringing deep technical acumen to solve challenging problems. As a self-starter capable of leading projects with minimal oversight, you will have the opportunity to make a significant impact in a fast-growing startup environment that fosters growth and innovation.

WHAT YOU’LL GET TO DO:

• Design, analyze, test, fly, and refly next generation propulsion hardware ensuring operational readiness and flight success.
• Develop clear requirements and deliver validated designs and hardware that meet program milestones and flight requirements.
• Execute engine test plans, including performance validation and reliability testing, and conduct post-test data reviews to distill learnings and adjust test planning.
• Collaborate with cross-functional teams to ensure robust integration, testing, and problem solving.
• Support flight operations, including engine acceptance and post-flight analysis.

YOU’LL BRING THESE QUALIFICATIONS AS PROPULSION ENGINEER II: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 2+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, and cryogenic systems.
• Fundamental understanding of mechanical design principles.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Advanced degree in a fluid mechanics-heavy field.
• Proven ability to conduct hotfire data reviews, identify blockers for testing, and ensure operational safety of engine systems.
• Experience with staged combustion rocket engines and Methyl/LOX propellant systems.
• Background in failure analysis, combustion dynamics, turbopump mechanics, and/ or fluid systems analysis.
• Familiarity with reusable rocket engine systems and/or test/launch facility operations.

ADDITIONAL REQUIREMENTS:

• Ability to travel to our Engine Development Center (Long Beach CA) and our Launch Complex 3 (Wallops VA), approximately 25%.
• Flexibility to work extended hours or weekends as needed.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Occasional exposure to dust, fumes and moderate levels of noise.

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.  

SUPPLIER QUALITY ENGINEER II/SENIOR - MACHINING

Based out of Rocket Lab's headquarters in Long Beach, CA the Supplier Quality Engineer II/Senior - Machining is responsible for ensuring quality requirements for procured parts, services, and processes are achieved. Working as a liaison between internal design/manufacturing stakeholders and suppliers, you translate technical requirements into clear specifications, drive supplier improvement, and manage the competing priorities between customers and suppliers.

WHAT YOU’LL GET TO DO:

• Serve as the technical point of contact for assigned parts and assemblies, solving emergent supplier quality challenges and mitigating risk to the manifest.
• Own production components and assemblies end-to-end - driving improvements in manufacturing methods, identifying new suppliers, and developing reliable rate-ramp processes.
• Conduct DFM reviews to ensure parts are manufacturable, preferably prior to sourcing.
• Partner with procurement to vet suppliers for quality capability and takt time alignment.
• Author and flow down specifications translating Rocket Lab quality and manufacturing requirements to the supply base.
• Scope forming, cutting, and inspection technologies that improve rate, quality, or efficiency.
• Drive root cause resolution on assigned part issues; implement changes at suppliers or internally and pursue re-sourcing where warranted.
• Create and disposition Nonconformance tickets; coordinate rework, repair, or use-as-is dispositions with engineering.
• Lead containment activities on assigned parts - define scope, align cross-functional stakeholders, and drive to resolution.

**(This position can be hired as a Supplier Quality Engineer II - Machining or Senior Supplier Quality Engineer I - Machining) ** 

QUALIFICATIONS YOU’LL BRING AS A SUPPLIER QUALITY ENGINEER II - MACHINING:

• Minimum 2  years' experience in a regulated industry: Aerospace, Medical, Automotive, or similar.
• Bachelor's degree in Mechanical, Electrical, Aerospace, Mechatronic Engineering, or equivalent.
• Prior experience in a supplier quality role.
• Proficiency with GD&T and engineering drawing interpretation.

QUALIFICATIONS YOU’LL BRING AS A SENIOR SUPPLIER QUALITY ENGINEER I - MACHINING:

• Minimum 5 years' experience in a regulated industry: Aerospace, Medical, Automotive, or similar.
• Bachelor's degree in Mechanical, Electrical, Aerospace, Mechatronic Engineering, or equivalent.
• Prior experience in a supplier quality role.
• Proficiency with GD&T and engineering drawing interpretation.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• CNC machining operations: milling, turning, 5-axis machining, fixturing/setup practices, tool & die fundamentals, and the ability to review machining routings and process plans.
• Engineering drawings and GD&T per ASME Y14.5, particularly in a machined-components context.
• Propulsion/fluid system component knowledge: pressure hardware, seal faces, fluid interfaces, and associated manufacturing processes (extrusions, seamless/welded tubing, forming, welding, proof/pressure testing).
• Surface finish requirements and their relationship to functional performance — sealing surfaces, fluid interfaces, bearing fits.
• Thread standards and inspection methods (unified, metric, pipe) for fluid system applications.
• Cleanliness and FOD control requirements for propulsion fluid system hardware.
• Welding familiarity: TIG, MIG, and orbital tube welding of stainless and carbon steels.
• Stainless steel grade experience (300 series, 17-4, 15-5) — machinability, weldability, and corrosion considerations.
• Sheet metal forming familiarity: press brake, hydroforming, and tube bending in stainless and carbon steels.

SHARED ACROSS ALL SEQ ROLES:

• Structured problem-solving experience using 8D, A3, or equivalent RCA methodology.
• Familiarity with AS9100 quality management systems; exposure to NADCAP special process requirements a plus.
• Knowledge of statistical quality methods: SPC, process capability (Cp/Cpk), MSA/Gage R&R; Six Sigma or Lean a plus.
• Experience with PPAP and related elements: APQP, PFD, PFMEA, Control Plan, FAIR.
• Proficiency with MRP/ERP systems; familiarity with Jira, Confluence, and Power BI a plus.
• Demonstrated ability to share information and influence across organizational lines.

ADDITIONAL REQUIREMENTS:  

• Ability to work extended hours, some nights and/or weekends when needed
• 40-50% Travel required
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise 

SUPPLY CHAIN

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.

MATERIAL PLANNER II

Based onsite at Rocket Labs global headquarters in Long Beach, CA, the Material Planner is responsible for managing MRP and planning for every part that Rocket Lab makes or buys.  Material Planners are quarterbacks on a very large team of players that support operations and supply chain; they call the plays and ensure everyone within production and supply chain know their next action. Material planners interact with engineering, quality, production, supply chain, and finance, to ensure they are planning and managing the production schedule, supplier lead times, inventory levels, and engineering build timelines.

 WHAT YOU’LL GET TO DO:

• Responsible for demand, supply, and fulfilment planning within MRP
• Responsible for ensuring bill of materials, parts, and master data, are maintained within ERP
• Accountable for timely release of purchase planning messages to procurement
• Accountable for timely release of work orders to production
• Responsible for updating demand to accommodate engineering change orders, and communicating changes to procurement.
• Accountable for creating visibility of material position (with line of balance reports, material shortage reports, clear to build reports, etc.)
• Work in a cross functional team environment as a strong team player and demonstrate ability to work with other functional groups to achieve company-wide goals
• Other duties asked by your manager, relevant to your role

YOU’LL BRING THESE QUALIFICATIONS:

• 2+ years of experience and a bachelor’s degree in engineering, business, or supply chain.
• Proven ability to produce material line of balance, and conduct clear to build reviews
• Proven knowledge of Material Planning fundamentals for master data management, order policy, BOM management, and planning release and fulfillment.
• Proficient in MRP systems
• Proficient in MS Office, ERP systems, math and statistics

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Proficient in MRP systems
• Prior experience in aerospace, EV automotive, or other disruptive manufacturing industries
• Prior experience in rapid growth environment
• Ability to read and interpret engineering drawings
• Experience with AS9100, US export controls
• Strong organizational and problem-solving skills with the ability to prioritize effectively and efficiently
• Excellent verbal and written communication abilities
• Team oriented, strong ability to multi-task and work in a fast-paced environment and to multiple deadlines

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise. 

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up assembly kits that enable our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all our materials and products are compliant and up to standard. They are the chain that links our teams together and are critical to our success.

BUSINESS SYSTEMS ENGINEER II

Business Systems Engineers are key resources in leading the development and execution of important initiatives across the Supply Chain function. They are expected to identify and pursue opportunities for continuous improvement while supporting a best-in-class Supply Chain team. They will drive the development of diagnostics and transformations while delivering the highest quality results. At Rocket Lab, a successful Business Systems Engineer must also possess strong analytical capabilities, a passion for problem-solving and critical thinking, and a forward-thinking mindset to integrate AI-driven solutions into supply chain operations. As we look to the future, Rocket Lab is committed to leveraging AI technologies to revolutionize supply chain operations. Our vision is to develop intelligent agents and bots that work alongside supply chain professionals to enhance productivity, streamline decision making, and optimize processes.

WHAT YOU’LL GET TO DO:

• Conduct in-depth analyses using SQL, R, Power BI, Python, and other tools to assess risk, gather intelligence, and formulate actionable plans.
• Lead the design, development, and implementation of AI-driven tools and systems to support supply chain operations, including intelligent agents and bots that act as "wingmen" for supply chain professionals.
• Collaborate with cross-functional teams to identify opportunities for AI integration, automation, and process optimization across the supply chain.
• Develop and deploy machine learning models to enhance forecasting, inventory management, procurement, and logistics.
• Proactively assess and develop opportunities for efficiencies and automation, including the use of AI to reduce manual tasks.
• Contribute to the development and maintenance of procedures and documentation for AI-enabled tools and systems.
• Provide training and support to the broader team on new AI tools, reports, and processes.
• Identify and propose cost reduction opportunities across various products and services, leveraging AI to uncover hidden efficiencies.

YOU’LL BRING THESE QUALIFICATIONS:

• 2+ years' experience within a supply chain environment and a bachelor’s degree or equivalent years of work experience (HS Diploma and 6+ years of total work experience).
• Experience with at least one of the following: SQL, R, Python, or Power BI.
• Proficient using Microsoft Products (Outlook, Excel, Word, PowerPoint, Access).
• Exposure to ERP systems.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• A passion for leveraging AI and technology to solve complex problems and improve operational efficiency.
• Proficient in MRP systems.
• Prior experience in a fast-paced manufacturing environment.
• Experience with developing and deploying AI or machine learning models.
• Experience conducting wide-ranging research and applying findings to real-world applications.
• Clear, concise, and confident interpersonal, verbal, and written communication skills.
• Team-oriented with a strong ability to multi-task and work in a fast-paced environment.
• Proven ability to clearly communicate, manage multiple work tasks, and provide regular status updates.
• Strong organizational skills with the ability to prioritize effectively and efficiently.

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Must be physically able to commute to buildings.
• Occasional exposure to dust, fumes, and moderate levels of noise.

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

PROPULSION TEST TECHNICIAN III

Based out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Test Technician III is responsible for the testing of our Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. 

WHAT YOU'LL GET TO DO:

• Perform high-pressure pneumatic operations (GN2/HE).
• Set up and operate Data Acquisition (DAQ) systems, including FlexLogger and LabView.
• Troubleshoot and repair valves, regulators, pressure relief valves, pressure transducers, and check valves.
• Work with Piping and Instrumentation Diagrams (P&IDs).
• Conduct hydrostatic testing and handle LN2/cryogenic components during testing procedures.
• Generate Non-Conformance Reports (NCRs) to document and address issues.
• Implement and improve 5S practices to maintain a clean and organized work area.

YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION TEST TECHNICIAN III:

• 5+ years of experience in high-pressure operations.
• Experience in Data Acquisition & Instrumentation systems such as FlexLogger and LabView.
• Hands-on experience with valves, regulators, pressure relief valves, pressure transducers, and check valves.
• Experience handling LN2/cryogenic components under test conditions.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 8+ years of mechanical assembly and/or mechanical fitting experience
• Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak).
• A&P, trade, or industry certified.
• Experience with in-space testing.
• Knowledgeable in manufacturing processes and continued product development.

ADDITIONAL REQUIREMENTS 

• Willing to work Monday - Thursday  3:15pm - 1:45am
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position 
• Able to lift up to 25lbs. unassisted 
• Must be able to climb ladders and be comfortable working in tight spaces. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces 

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

PAYLOAD INTEGRATION ENGINEER II 

Rocket Lab is seeking an experienced payload integration engineer with previous launch vehicle or spacecraft integration experience. This role will work under the direction of the Team Lead for Payload Integration. The candidate must have demonstrated experience in one or more of the following areas: spacecraft or launch vehicle integration, systems engineering, and/or electrical/mechanical systems.

This candidate will interface with spacecraft customer integration teams and direct and perform tasks associated with the physical payload integration to the Electron and HASTE launch vehicle. This role requires a candidate who works well with a multidisciplinary team and can hold their own when presented with technical challenges in front of both internal and external customers. The position is based in Long Beach, CA at Rocket Lab Headquarters, but requires frequent travel to customers and launch sites worldwide.

WHAT YOU'LL GET TO DO:

• Performs hands-on payload integration activities, including fit checks, dispenser, and launch vehicle integration
• Assists management in on-site integration planning and performance of daily coordination meetings during launch site integration periods.
• Provides inputs for development and verification of Launch Vehicle to Spacecraft Interface Control Documentation (ICD)
• Ability to create and execute assembly integration and test instructions
• Provide customer support to answer questions with internal technical staff as required
• Remain in constant contact with engineering staff regarding mechanical and electrical design needs based on mission requirements for the spacecraft integration.

YOU'LL BRING THESE QUALIFICATIONS:

• Bachelor's degree in an engineering or technical discipline and 2 +years of applicable experience
• Active US Government security clearance Secret or TS/SCI
• Previous launch vehicle or space hardware integration experience
• Demonstrated ability to understand technical constraints relative to payload integration
• Advanced presentation and technical writing skills
• Ability to travel to launch sites and customer sites including overseas (New Zealand and others)

 THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Mechanical, Electrical or Aerospace degree preferred
• Solid interpersonal and organizational skills
• Experience with CubeSats, SmallSats, or other small space payloads
• Ability to read mechanical and electrical drawings
• Ability to perform electrical and mechanical testing

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

SENIOR / PRINCIPAL PROPULSION ENIGNEER

As Senior/Principal Propulsion Engineer, you will play a critical role in the development, testing, and operation of the Archimedes Engine family, a cornerstone of the Neutron rocket program. You will take ownership of subsystems and engine operation, driving design, analysis, testing, and operational readiness. You will execute testing campaigns, analyze data, improve existing evaluation capability and refine designs for reliability and vehicle operations.

This role demands technical expertise, strong autonomy, and the ability to align teams and projects to achieve program goals. Principal Engineers will additionally drive value to teams outside their group, influencing cross-functional efforts and contributing to the broader success of the Neutron program.

WHAT YOU’LL GET TO DO:

• Design, analyze, test, fly, and refly next generation propulsion hardware ensuring operational readiness and flight success.
• Develop and execute test plans, including qualification and acceptance testing, and conduct post-test data reviews to refine designs and processes.
• Collaborate across engineering disciplines to optimize engine performance, reliability, and manufacturability.
• Generate high-level plans and prioritize tasks across teams, resolving competing priorities and ensuring alignment with program goals.
• Mentor and guide engineers, fostering technical growth and collaboration.
• Work with manufacturing, testing and vehicle operation teams to support engine needs, operation, and resolve issues each part of the engine lifecycle.

Please note: This position can be hired as a Senior Propulsion Engineer I, Senior Propulsion Engineer II or Principal Propulsion Level.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER I: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 5+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER II: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 8+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

YOU’LL BRING THESE QUALIFICATIONS AS A PRINCIPAL PROPULSION ENGINEER: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 12+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Advanced degree in a fluid mechanics-heavy field.
• Experience with ox-rich staged combustion systems and Methyl/LOX propellants.
• Background in failure analysis, combustion dynamics, turbopump mechanics, and hydraulics.
• Familiarity with reusable rocket engine systems and test/launch facility operations.
• Experience with best practices for design, qualification, and production.

ADDITIONAL REQUIREMENTS:

• Ability to travel to test and launch facilities (~25%).
• Flexibility to work extended hours or weekends as needed.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Occasional exposure to dust, fumes and moderate levels of noise.

SUPPLY CHAIN

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron & Neutron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.

INVENTORY COORDINATOR II

Based onsite at Rocket Lab’s global headquarters in Long Beach, CA, the Inventory Coordinator is tasked with all aspects of inventory management from receiving, putting into inventory, counting, and kitting, inwards and outwards goods. There are thousands of components that are used on Electron and millions of dollars of inventory that need to be received, stored, and kitted for production maintaining inventory accuracy through adherence to process, and customer satisfaction of just-in-time fulfillment makes an Inventory Coordinator a critical role in the "last mile" of our supply chain.

WHAT YOU’LL GET TO DO

• Receive inwards goods on a FIFO basis and ensure SOP’s for processing of inwards goods are adhered to 
• Ensure accurate and on time delivery of components and production kits in accordance with production & transfer order plans / priorities
• Ensure supply of Kanban materials to shop floor is sustained
• Raw material movements and replenishment
• Receive inwards goods on a FIFO basis and ensure SOP’s for processing of inwards goods are adhered to 
• Ensure accurate and on time delivery of components and production kits in accordance with production & transfer order plans / priorities
• Ensure SOP’S are followed, and stock point accuracy is maintained
• Participate in a daily cycle counting program.
• Ensure FIFO is managed and maintained to achieve appropriate stock rotation
• Maintain stock point accuracy and ensure LN accurately reflects actual stock movements.  Investigating and resolving any discrepancies.
• Additional duties as reasonably required

YOU’LL BRING THESE QUALIFICATIONS:

• High school diploma and 1+ years of experience
• Proficient using Microsoft Products (Outlook, Excel, Word, Power Point, Access)
• Knowledge of MRP/ERP systems

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Associate's Degree or Bachelor's Degree
• Experience in aerospace, automotive, or other heavy manufacturing
• Experience with control and tracking of serial, and lot controlled materials.
• Experience with ERP Systems
• Prior experience in high-paced, rapid growth environment
• Team oriented, strong ability to multi-task and work in a fast-paced environment and to multiple deadlines
• Strong organizational skills with the ability to prioritize effectively and efficiently

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise. 

SPACE SYSTEMS FINANCE

Rocket Lab’s Space Systems Finance team is the business partner to the global Space Systems segment. We provide everything from financial results to strategic analysis, and everything in between, in order to drive results and intelligent business decisions that are best for Rocket Lab, our customers, and our stakeholders. We are flexible problem-solvers working in a fast-paced environment and thrive under the challenge of supporting this dynamic, high-tech space company.

FINANCE MANAGER, SPACE SYSTEMS

Based onsite at Rocket Lab's Headquarters in Long Beach, CA the Finance Manager is responsible for supporting the finance cadences and analysis for the space systems segment. You will work with the satellite manufacturing and satellite components teams supporting the financial reporting, business cases, cost models and other adhoc analysis. In addition, you will drive many exciting projects to grow and advance the company.

WHAT YOU’LL GET TO DO:

• Become a strong strategic partner to the Space System’s segment, providing timely and accurate financial information and recommendations to decision makers to make prudent business decisions
• Support Rocket Lab space systems component businesses with the finance cadence; monthly financial reporting and analysis, quarterly forecasts, annual operating plan, etc.
• Support, development, and maintenance of weekly and monthly financial reporting, planning, and KPI’s
• Take point on dynamic business studies and adhoc analysis including detailed project ROI analysis.

YOU’LL BRING THESE QUALIFICATIONS:

• 8+ years of finance experience in a manufacturing company/environment and a bachelor’s degree or equivalent years of work experience (12+ years total experience)
• In-depth experience with ERP, financial systems, and modeling
• Expertise in the Microsoft Office Suite especially with Excel
• Demonstrated experience implementing value add to the financial business process
• Willingness to travel if necessary

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Ability to take initiative and lead efforts with minimal instruction
• Experience with firm fixed price, percent complete revenue recognition
• Prior experience in aerospace company, with knowledge of space industry
• Experience in LN, OneStream, Adaptive, WorkDay HRIS
• Excellent communication skills and cross-functional business partner experience
• Ability to translate financial results to functional leads to drive results
• MBA or similar finance/accounting related degree
• High attention to detail and accuracy of analysis

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise.

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

SENIOR / PRINCIPAL PROPULSION ENIGNEER

As Senior/Principal Propulsion Engineer, you will play a critical role in the development, testing, and operation of the Archimedes Engine family, a cornerstone of the Neutron rocket program. You will take ownership of subsystems and engine operation, driving design, analysis, testing, and operational readiness. You will execute testing campaigns, analyze data, improve existing evaluation capability and refine designs for reliability and vehicle operations.

This role demands technical expertise, strong autonomy, and the ability to align teams and projects to achieve program goals. Principal Engineers will additionally drive value to teams outside their group, influencing cross-functional efforts and contributing to the broader success of the Neutron program.

WHAT YOU’LL GET TO DO:

• Design, analyze, test, fly, and refly next generation propulsion hardware ensuring operational readiness and flight success.
• Develop and execute test plans, including qualification and acceptance testing, and conduct post-test data reviews to refine designs and processes.
• Collaborate across engineering disciplines to optimize engine performance, reliability, and manufacturability.
• Generate high-level plans and prioritize tasks across teams, resolving competing priorities and ensuring alignment with program goals.
• Mentor and guide engineers, fostering technical growth and collaboration.
• Work with manufacturing, testing and vehicle operation teams to support engine needs, operation, and resolve issues each part of the engine lifecycle.

Please note: This position can be hired as a Senior Propulsion Engineer I, Senior Propulsion Engineer II or Principal Propulsion Level.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER I: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 5+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER II: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 8+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

YOU’LL BRING THESE QUALIFICATIONS AS A PRINCIPAL PROPULSION ENGINEER: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 12+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture.
• Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Advanced degree in a fluid mechanics-heavy field.
• Experience with ox-rich staged combustion systems and Methyl/LOX propellants.
• Background in failure analysis, combustion dynamics, turbopump mechanics, and hydraulics.
• Familiarity with reusable rocket engine systems and test/launch facility operations.
• Experience with best practices for design, qualification, and production.

ADDITIONAL REQUIREMENTS:

• Ability to travel to our Engine Development Center (Long Beach CA) and our Launch Complex 3 (Wallops VA), approximately 25%.
• Flexibility to work extended hours or weekends as needed.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Occasional exposure to dust, fumes and moderate levels of noise.

FACILITIES

Rocket Lab’s Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should.

SENIOR / MASTER ELECTRICIAN

Based onsite at Rocket Lab in Long Beach, California, the Electrician is responsible for electrical maintenance, infrastructure upgrades, and electrical improvement projects at Rocket Lab's headquarters and Engine Development Center.

(Please note: this position can be hired on as a Senior Electrician or Master Electrician level.)

WHAT YOU’LL GET TO DO:

• Serve as the primary electrical subject matter expert for HQ and the Engine Development Center.
• Plan, scope, and execute electrical infrastructure projects including power distribution, panel upgrades, machine installs, lighting systems, and equipment tie-ins.
• Coordinate directly with internal customers (Manufacturing, Engineering, EHS, Production, IT) to define electrical requirements, project timelines, shutdown windows, and commissioning plans.
• Perform installation, troubleshooting, repair, and upgrade of building electrical systems (120V–480V, 3-phase systems).
• Read and interpret electrical schematics, single-line diagrams, panel schedules, and construction drawings.
• Install and modify conduit systems; proficiently bend conduit from ½" to 1 ¼” using manual tube benders (EMT preferred; rigid and flexible conduit experience a plus).
• Size conductors, breakers, transformers, and distribution equipment in accordance with NEC and local code.
• Support equipment installations including procurement, layout planning, power drops, disconnects, and final energization.
• Manage electrical work orders through JIRA and prioritize based on production impact and safety risk.
• Ensure all electrical work complies with NEC, OSHA, and local building code requirements.
• Provide oversight of contractors performing electrical work and verify work meets Rocket Lab standards.
• Assist with broader facilities maintenance tasks as required, including HVAC support, plumbing repairs, painting, minor construction, furniture relocation, and other general facilities maintenance activities to support site operations.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR ELECTRICIAN:

• 8+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 12+ years of experience in electrical maintenance in lieu of diploma. 
• Experience with facilities systems and improvement projects.

YOU’LL BRING THESE QUALIFICATIONS AS A MASTER ELECTRICIAN:

• 10+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 14+ years of experience in electrical maintenance in lieu of diploma. 
• Experience with facilities systems and improvement projects.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Licensed electrician or certified electrical professional is highly preferred. 
• Experience with managing a cleanroom.
• Capable of solving complex problems with little to no supervision in a timely manner.

ADDITIONAL REQUIREMENTS

• Ability to remain focused while working in hazardous environments, while wearing appropriate PPE 
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Able to lift up to 25lbs. unassisted
• Must be able to climb ladders and be comfortable working in tight spaces.
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Must be able to work at heights
• Must be able to operate scissor lifts/boom lifts

#RL1

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

SENIOR MANUFACTURING ENGINEER - TURBOPUMP ASSEMBLY

Based out of Rocket Lab's Headquarters for Long Beach, CA the Senior Manufacturing Engineer is responsible for the development of new products and product revisions as related to both Rutherford and Archimedes engines. This role will have primary responsibility over the turbopump assembly for the Archimedes engine. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors, and investors.

(Please note - this position can be hired as a Senior Manufacturing Engineer I or Senior Manufacturing Engineer II level) 

WHAT YOU’LL GET TO DO:

• Contribute to design reviews acting as an expert in design for manufacture, design for machining, productivity, quality control, etc.
• Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance.
• Responsible for continuous improvement and cost reduction projects
• Collaborate with propulsion assembly technicians for general alignment, capability, and support.
• Perform initial Value Stream Mapping Exercises, Method of Manufacture plans, cell design, etc.
•  Implement Factory layouts, Equipment selection, FAT, SAT, and production commissioning.
• Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor signoffs.
•  Interface with the quality team to resolve manufacturing engineering quality responsibilities, and when required, lead problem containment and structured root cause & corrective action investigations.
•  Lead the continuous improvement process in your area using lean tools and techniques such as 5S

QUALIFICATIONS YOU’LL BRING AS A SENIOR MANUFACTURING ENGINEER I:

• Bachelor’s degree in mechanical, aerospace, manufacturing engineering, or similar engineering discipline 
• 5+ years of experience in a heavy development manufacturing environment 
• Understanding of fluid and structural mechanics fundamentals
• Knowledge in manufacturing processes for aerospace materials

QUALIFICATIONS YOU’LL BRING AS A SENIOR MANUFACTURING ENGINEER II:

• Bachelor’s degree in mechanical, aerospace, manufacturing engineering, or similar engineering discipline 
• 8+ years of experience in a heavy development manufacturing environment 
• Understanding of fluid and structural mechanics fundamentals
• Knowledge in manufacturing processes for aerospace materials

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Advanced engineering degree 
• Experience with design, testing and development of turbopumps or similar turbomachinery 
• Experience contributing to and steering design reviews and provide technical expertise in support of design for manufacture, test, and assembly
• Well versed in GD&T and inspection methods
• Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping
• Experience with 3D CAD software and tooling design

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise. 
• Availability to work long hours and weekends as needed based on test and launch schedules 

NEUTRON 

Rocket Lab’s Neutron team is responsible for bringing our new large rocket Neutron and its launch and test sites to life. From designing and testing Neutron’s structures and components, to firing up its new Archimedes engines, to setting up Neutron’s launch pads and test sites across the United States, joining the Neutron team is your opportunity to help launch a new large rocket for the very first time. 

QUALITY INSPECTOR - NDT LEVEL III

As a Quality Inspector NDT Level III based at Rocket Lab’s site in Long Beach, CA, you will support critical inspection activities that ensure the integrity and reliability of components and assemblies across our advanced manufacturing programs. In this role, you will lead and perform penetrant (PT) NDT inspections, develop testing procedures, and uphold compliance with rigorous industry standards. To excel, you must be detail‑driven, technically adept, and committed to maintaining the highest levels of quality in a fast‑paced, mission‑focused environment. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space!

WHAT YOU’LL GET TO DO:

• Perform advanced penetrant (PT) inspections on components and assemblies to detect defects, discontinuities, and ensure compliance with specifications
• Develop and implement NDT inspection techniques for complex geometries and materials
• Interpret and evaluate penetrant (PT) results to determine the acceptability of materials and components
• Provide technical guidance and training to NDT Level I and II technicians.
• Support research and development efforts for system qualification and certification of critical processes
• Ensure adherence to NDT standards such as AS, AMS, AWS, NAS, ASME, and ASTM.
• Collaborate with engineering and manufacturing teams to improve NDT processes and eliminate non-conforming products
• Maintain accurate documentation of inspection results and ensure compliance with quality management systems
• Stay updated on advancements in NDT technology and techniques to continuously improve inspection capabilities

YOU’LL BRING THESE QUALIFICATIONS: 

• 5+ years of experience in mechanical assembly, mechanical fitting, or NDT testing
• Certified in American Welding Society (AWS) or Certified Welding Inspector (CWI)
• Certification as NDT Level III in penetrant (PT) (per ASNT, NAS 410, or equivalent standards)
• Experience in aviation, aerospace, or a similar industry performing NDT inspections
• Extensive experience inspecting advanced materials such as high-strength aluminum alloys, precipitation-hardened steels, Inconel, Monel, titanium, and Maraging steel (super alloys)
• Strong knowledge of NDT standards and codes, including AS, AMS, AWS, NAS, ASME, and ASTM
• High school diploma or GED

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Proven experience in improving NDT processes for efficiency, productivity, and quality assurance
• Familiarity with advanced inspection techniques for complex geometries and challenging materials

ADDITIONAL REQUIREMENTS:

• Ability to work one of the following shifts:
• 3:00PM - 1:30AM Monday – Thursday
• Must be able to stand for long periods, climb ladders, bend, grasp, sit, pull, push, stoop, and stretch as required
• Comfortable working in tight spaces and maneuvering in confined areas
• Ability to lift up to 25 lbs. unassisted
• Must be able to walk or stand for extended periods (minimum 8 hours)
• Willingness to work in a fast-paced environment and adapt to changing priorities

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components throughout the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up assembly kits that enable our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together and are critical to our success. 

SENIOR LOGISTICS COORDINATOR

Based on site at Rocket Lab’s global headquarters in Long Beach, CA, the Senior Logistics Coordinator is responsible for domestic and international shipping. There are hundreds of components that are used to manufacture Electron’s Launch Vehicle that are globally sourced and/or moved domestically and internationally between Rocket Lab manufacturing sites. This role will actively manage the logistical movements of these items. This role is responsible for managing domestic and international logistics from suppliers, between Rocket Lab locations internationally and beyond. The role also requires adherence to ITAR and other applicable export regulations. 

WHAT YOU’LL GET TO DO: 

• Plan and coordinate inbound and outbound shipments to ensure timely delivery. 
• Schedule transportation and resolve shipping or delivery issues. 
• Ensure compliance with shipping regulations and maintain accurate documentation. 
• Identify and implement process improvements to optimize logistics operations. 
• Train, and support logistics staff to meet performance goals. 
• Build and maintain relationships with vendors and evaluate their performance. 
• Communicate with internal teams and external partners to ensure smooth operations. 
• Track and analyze logistics KPIs and prepare performance reports. 
• Develop and implement risk management and contingency plans for disruptions. 

YOU’LL BRING THESE QUALIFICATIONS: 

• High school diploma and 2+ years of experience. 
• Exposure to international shipping regulations. 
• High degree of knowledge of freight forwarding and customs regulations. 
• International Air Transportation Association, (IATA) / International Maritime Dangerous Good (IMDG) knowledge. 
• Strong IT knowledge, comfortable working with Windows. 
• Experience working with a fully integrated Enterprise Resource Planning system. 
• Basic understanding of necessary documentation for international shipping. 

THESE QUALIFCATIONS WOULD BE NICE TO HAVE: 

• A can-do attitude, open to learning with good organizational skills. 
• Excellent communication skills and able to build working relationships.  
• Experience in aerospace, automotive, or other heavy manufacturing. 
• Experience with ERP Systems and Transportation Management Systems (TMS). 
• Prior experience in high-paced, rapid growth environment. 
• Holds an active dangerous goods certification. 
• Coordinating shipments across all modes of transportation: air, ocean, trucking, parcel/small pack. 
• Works independently within established procedures associated with the specific job function.  
• Has gained proficiency in multiple competencies relevant including specialized training and certifications. 

ADDITIONAL REQUIRMENTS: 

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings. 
• Occasional exposure to dust, fumes and moderate levels of noise.

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

QUALITY INSPECTOR II – MECHANICAL

Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector II - Mechanical is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.

WHAT YOU’LL GET TO DO:

• Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies.
• Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM.
• Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system.
• Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process.
• Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones.
• Embody a Built in Quality philosophy, consistently detecting non-conformance (Don’t accept a Defect – Don’t Pass a Defect) and preventing escapes to downstream customers.

YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR II:

• 2+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment.  
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• High school diploma or GED

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Experience in space manufacturing in-process environment on engine builds
• Experience with precision measuring equipment such as comparator, romer arm,  Keyence Vision System, and/or CMMs (PC-DMIS)
• Experience performing visual inspections using borescope
• High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc
• Inspection experience with aerospace components & assemblies
• Experience working with Enterprise Resource Planning (ERP) systems

ADDITIONAL REQUIREMENTS: 

• Ability to work one of the following shifts:
  • 5:00AM - 3:30PM Monday – Thursday
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus  
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

PROPULSION ENGINEER II – ARCHIMEDES ENGINE SYSTEMS

As an Engine Systems Propulsion Engineer, you will play a critical role in the development, testing, and operation of the Archimedes Engine family, a cornerstone of the Neutron rocket program. This highly technical role involves ownership of engine subsystems, test campaigns, data analysis, and refining designs for reliability and vehicle operations, while driving system architecture trades, managing interfaces, and optimizing requirements for the vehicle.

Success requires strong autonomy, technical expertise, curiosity, attention to detail, and the ability to organize complex systems into actionable plans while collaborating across teams. You will also support engine analysis, simulation, testing, and tool development, bringing deep technical acumen to solve challenging problems. As a self-starter capable of leading projects with minimal oversight, you will have the opportunity to make a significant impact in a fast-growing startup environment that fosters growth and innovation.

WHAT YOU’LL GET TO DO:

• Design, analyze, test, fly, and refly next generation propulsion hardware ensuring operational readiness and flight success.
• Develop clear requirements and deliver validated designs and hardware that meet program milestones and flight requirements.
• Execute engine test plans, including performance validation and reliability testing, and conduct post-test data reviews to distill learnings and adjust test planning.
• Collaborate with cross-functional teams to ensure robust integration, testing, and problem solving.
• Support flight operations, including engine acceptance and post-flight analysis.

YOU’LL BRING THESE QUALIFICATIONS AS PROPULSION ENGINEER II: 

• Bachelor’s degree in mechanical engineering, aerospace engineering, or related field.
• 2+ years of experience in rocket engine development, testing, or operations.
• Strong technical understanding of fluid dynamics, thermodynamics, and cryogenic systems.
• Fundamental understanding of mechanical design principles.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Advanced degree in a fluid mechanics-heavy field.
• Proven ability to conduct hotfire data reviews, identify blockers for testing, and ensure operational safety of engine systems.
• Experience with staged combustion rocket engines and Methyl/LOX propellant systems.
• Background in failure analysis, combustion dynamics, turbopump mechanics, and/ or fluid systems analysis.
• Familiarity with reusable rocket engine systems and/or test/launch facility operations.

ADDITIONAL REQUIREMENTS:

• Ability to travel to test and launch facilities (~25%).
• Flexibility to work extended hours or weekends as needed.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Occasional exposure to dust, fumes and moderate levels of noise.

SUPPLY CHAIN

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.

MATERIAL PLANNER II

Based onsite at Rocket Labs global headquarters in Long Beach, CA, the Material Planner is responsible for managing MRP and planning for every part that Rocket Lab makes or buys.  Material Planners are quarterbacks on a very large team of players that support operations and supply chain; they call the plays and ensure everyone within production and supply chain know their next action. Material planners interact with engineering, quality, production, supply chain, and finance, to ensure they are planning and managing the production schedule, supplier lead times, inventory levels, and engineering build timelines.

 WHAT YOU’LL GET TO DO:

• Responsible for demand, supply, and fulfilment planning within MRP
• Responsible for ensuring bill of materials, parts, and master data, are maintained within ERP
• Accountable for timely release of purchase planning messages to procurement
• Accountable for timely release of work orders to production
• Responsible for updating demand to accommodate engineering change orders, and communicating changes to procurement.
• Accountable for creating visibility of material position (with line of balance reports, material shortage reports, clear to build reports, etc.)
• Work in a cross functional team environment as a strong team player and demonstrate ability to work with other functional groups to achieve company-wide goals
• Other duties asked by your manager, relevant to your role

YOU’LL BRING THESE QUALIFICATIONS:

• 2+ years of experience and a bachelor’s degree in engineering, business, or supply chain.
• Proven ability to produce material line of balance, and conduct clear to build reviews
• Proven knowledge of Material Planning fundamentals for master data management, order policy, BOM management, and planning release and fulfillment.
• Proficient in MRP systems
• Proficient in MS Office, ERP systems, math and statistics

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Proficient in MRP systems
• Prior experience in aerospace, EV automotive, or other disruptive manufacturing industries
• Prior experience in rapid growth environment
• Ability to read and interpret engineering drawings
• Experience with AS9100, US export controls
• Strong organizational and problem-solving skills with the ability to prioritize effectively and efficiently
• Excellent verbal and written communication abilities
• Team oriented, strong ability to multi-task and work in a fast-paced environment and to multiple deadlines

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise. 

NEUTRON

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!

MANUFACTURING ENGINEER II / SENIOR - FLUID SYSTEMS

Based out of Rocket Lab's headquarters in Long Beach, CA the Manufacturing Engineer - Fluid Systems will develop, implement, and continuously improve the propulsion component, assembly, and integration manufacturing process through strong working knowledge of additive manufacturing, machining, welding, assembly, integration, tooling, test, and quality techniques. 

WHAT YOU’LL GET TO DO:

• Develop, perform, and qualify precision welding and fabrication of tubing components according to aerospace specifications.
• Utilize TIG, MIG, OTW and other welding methods to achieve the required structural integrity.
• Conduct thorough inspections of welded components, employing NDE/NDT methods to identify and rectify defects.
• Collaborate with engineering teams to interpret and implement design specifications.
• When required, lead problem containment and root cause/corrective action investigations
• Quickly analyze and resolve manufacturing discrepancies and non-conformances
• Collaborate with the quality team to identify and drive quality-related initiatives and improvements
• Liaison between production, quality, supply chain and design engineering staff for complex problem solving and process changes
• Identify, plan and execute capital equipment, machine, and layout upgrades to meet production requirements, including preparation of business cases
• Lead the continuous improvement process via Lean/Six Sigma tools and techniques
• Develop, introduce, and maintain new planning, production, quality, ERP, data collection and analysis, and other processes where none exist

(This position can be hired as a Manufacturing Engineer II or Senior Manufacturing Engineer Level)

YOU’LL BRING THESE QUALIFICATIONS AS A MANUFACTURING ENGINEER II - FLUID SYSTEMS:

• Bachelor's degree in mechanical engineering, manufacturing engineering, aerospace engineering, or other engineering discipline
• 2+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning
• Experience setting up and/or operating a tube shop or build area

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR MANUFACTURING ENGINEER – FLUID SYSTEMS:

• Bachelor's degree in mechanical engineering, manufacturing engineering, aerospace engineering, or other engineering discipline
• 5+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning
• Experience setting up and operating a tube shop or build area

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 8+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning
• Ability to create and deliver accurate and concise presentations for design, manufacturing, and quality
• Strong knowledge of metal working and fabrication processes
• Experience designing tooling in an aerospace manufacturing environment
• Hands-on with a passion for continuous improvement and building the best hardware
• Capable of solving complex problems with little to no supervision in a timely manner
• Adaptable and comfortable in an exciting, dynamic and ever-evolving environment

ADDITIONAL REQUIREMENTS: 

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.   
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.  
• Must be physically able to commute to buildings 
• Occasional exposure to dust, fumes and moderate levels of noise. 
• Availability to work long hours and weekends as needed based on test and launch schedules. 

FACILITIES

Rocket Lab’s Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should.

SENIOR FACILITIES ELECTRICAL TECHNICIAN / MASTER FACILITIES ELECTRICAL TECHNICIAN

Based onsite at Rocket Lab in Long Beach, California, the Facilities Electrical Technician is responsible for electrical maintenance, infrastructure upgrades, and electrical improvement projects at Rocket Lab's headquarters and Engine Development Center.

(Please note: this position can be hired on as a Senior Facilities Electrical Technician or Master Facilities Electrical Technician level.)

WHAT YOU’LL GET TO DO:

• Serve as the primary electrical subject matter expert for HQ and the Engine Development Center.
• Plan, scope, and execute electrical infrastructure projects including power distribution, panel upgrades, machine installs, lighting systems, and equipment tie-ins.
• Coordinate directly with internal customers (Manufacturing, Engineering, EHS, Production, IT) to define electrical requirements, project timelines, shutdown windows, and commissioning plans.
• Perform installation, troubleshooting, repair, and upgrade of building electrical systems (120V–480V, 3-phase systems).
• Read and interpret electrical schematics, single-line diagrams, panel schedules, and construction drawings.
• Install and modify conduit systems; proficiently bend conduit from ½" to 1 ¼” using manual tube benders (EMT preferred; rigid and flexible conduit experience a plus).
• Size conductors, breakers, transformers, and distribution equipment in accordance with NEC and local code.
• Support equipment installations including procurement, layout planning, power drops, disconnects, and final energization.
• Manage electrical work orders through JIRA and prioritize based on production impact and safety risk.
• Ensure all electrical work complies with NEC, OSHA, and local building code requirements.
• Provide oversight of contractors performing electrical work and verify work meets Rocket Lab standards.
• Assist with broader facilities maintenance tasks as required, including HVAC support, plumbing repairs, painting, minor construction, furniture relocation, and other general facilities maintenance activities to support site operations.

YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR FACILITIES ELECTRICAL TECHNICIAN:

• 8+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 12+ years of experience in electrical maintenance in lieu of diploma. 
• Experience with facilities systems and improvement projects.

YOU’LL BRING THESE QUALIFICATIONS AS A MASTER FACILITIES ELECTRICAL TECHNICIAN:

• 10+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.
• High School Diploma, GED OR 14+ years of experience in electrical maintenance in lieu of diploma. 
• Experience with facilities systems and improvement projects.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Licensed electrician or certified electrical professional is highly preferred. 
• Experience with managing a cleanroom.
• Capable of solving complex problems with little to no supervision in a timely manner.

ADDITIONAL REQUIREMENTS

• Ability to remain focused while working in hazardous environments, while wearing appropriate PPE 
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Able to lift up to 25lbs. unassisted
• Must be able to climb ladders and be comfortable working in tight spaces.
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Must be able to work at heights
• Must be able to operate scissor lifts/boom lifts

GNC ENGINEER II/ SENIOR GNC ENGINEER I - MISSION FORMULATION

Based out of Rocket Lab’s global headquarters in Long Beach, CA, the GNC Engineer II/ Senior GNC Engineer I - Mission Formulation is responsible for Guidance Navigation and Control (GNC) design, modeling, analyses, and testing for Rocket Lab launches and missions. You'll play an integral part of Rocket Lab’s Global Launch Services (GLS) Mission Formulation Team, which works closely with other Engineering teams and Production to bring new launch and mission concepts to life. 

As part of the Mission Formulation team, you'll be responsible for conducting trades studies, preliminary and final mission analyses, and definition and implementation of detailed designs for Rocket Lab’s launch programs. This team is also primarily responsible for the formulation and implementation of launches and missions for classified missions on HASTE and Electron launch vehicles. 

Success in this position will be measured by the value of the knowledge and experience in launch vehicle design and mission experience that you bring into this role, your ability to contribute to projects without supervision, successful collaboration with other teams across Rocket Lab, and the skillful prioritization of competing engineering projects across the group. 

WHAT YOU’LL GET TO DO:

• GNC contact to Business Development for proposals and mission definition 
• Launch and mission operational concept development 
• Orbital and suborbital trajectory design and analysis 
• Work with external stakeholders and customers for mission-specific requirements engineering 
• Document proposed GNC solutions and participate in design reviews with customers 
• Support hardware-in-the-loop (HITL) testing to verify trajectories, GNC, and flight code performance 
• Conduct Monte Carlo simulation analyses to define and verify launch and mission operations 
• Develop and support release of flight code for pre-launch ground testing, launch, and mission operations 
• Develop tools and processes for automating common GNC modelling and analysis tasks 

(Please note: This position can be hired at the GNC Engineer II or Senior GNC Engineer I level.)

YOU’LL BRING THESE QUALIFICATIONS AS GNC ENGINEER II: 

• Bachelor’s degree and 2+ years of industry experience in GNC/ADCS
• Understanding of orbital mechanics and/ or closed-loop control systems, preferably launch vehicles
• Experience with trajectory optimization
• Proven experience developing real-time control and/or estimation algorithms in autonomous vehicles, preferably launch vehicles
• Active Secret security clearance OR Ability to obtain and maintain one

YOU’LL BRING THESE QUALIFICATIONS AS SENIOR GNC ENGINEER I:

• Bachelor’s degree and 5+ years of industry experience in GNC/ADCS
• Understanding of orbital mechanics and/ or closed-loop control systems, preferably launch vehicles
• Experience with trajectory optimization
• Proven experience developing real-time control and/or estimation algorithms in autonomous vehicles, preferably launch vehicles
• Active Secret security clearance OR Ability to obtain and maintain one

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• Active TS/SCI clearance
• Experience with requirements assessments and interface control document generation
• Experience with git version control.
• 3+ years’ experience in modelling, simulation and/or control of dynamics systems, particularly rigid bodies
• 3+ years’ experience with Python development
• 3+ years’ experience with data analysis using MATLAB and/or SciPy
• Experience developing in C/C++
• Experience with ASTOS or similar mission analysis, trajectory optimization, vehicle design and simulation tools
• Strong communication skills, with the ability to build strong working relationships
• Creative, analytical, and good at problem solving
• Ability to work on own initiative and to plan daily workflow to meet higher level tasks

ADDITIONAL REQUIREMENTS:

• Must hold an active security clearance, or be willing to obtain one upon hire
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise

SUPPLY CHAIN 

Rocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.  

SENIOR SUPPLIER DEVELOPMENT ENGINEER I /II - ELECTRICAL

Based out of Rocket Lab's headquarters in Long Beach, CA, the Senior Supplier Development Engineer I/II – Electrical is the primary technical owner of the supply base for a broad portfolio of electrical hardware. This role is responsible for leading the end-to-end industrialization of suppliers from source selection and process qualification through NPI, PPAP, and production ramp, thereby ensuring that every supplier can deliver conforming hardware at rate, on cost, and on schedule.

This is a hands-on, supplier-facing role requiring deep commodity knowledge across electrical domains, including but not limited to PCBAs (Printed Circuit Board Assemblies), wire harnesses, connectors, sensors, power systems, and electro-mechanical assemblies. The SDE operates proactively at the intersection of design, manufacturing, procurement, and quality. They are the ultimate internal advocate for supply chain manufacturability and capability.

WHAT YOU’LL GET TO DO:

• Lead end-to-end supplier industrialization for electrical hardware from source selection and process qualification through NPI, PPAP, and rate production ramp.
• Partner with procurement and engineering to identify, evaluate, and select suppliers based on process capability, quality systems, and capacity across PCB manufacturing, SMT (Surface Mount Technology), wire harness assembly, connector production, and electro-mechanical integration.
• Conduct supplier capability assessments during qualification phases, evaluating tooling maturity, measurement systems, process controls, and workforce qualification against program requirements.
• Lead Design for Manufacturability (DFM) reviews with design engineering at the earliest program stage, providing actionable feedback on PCB layout, component selection, trace routing, tolerance stack-ups, and design characteristics that drive cost or quality risk.
• Own the APQP process at suppliers, driving completion of all quality planning deliverables — process flow, PFMEA, control plan, MSA/GR&R, and dimensional results — on schedule and to the required standard.
• Drive the PPAP program as a production readiness gate; define required submission levels, disposition supplier packages, and ensure process capability (Cpk) is demonstrated on critical and significant characteristics to enable at-rate production.
• Lead First Article Inspection (FAI) activities at suppliers and in coordination with internal quality teams; ensure all findings are resolved to closure within project timelines.
• Identify systemic performance gaps; own supplier improvement plans and drive measurable progress against quality, cost, delivery, and capacity targets.
• Lead root cause and corrective action (RCCA) for supplier quality issues and escapes, applying structured problem-solving methods (8D, 5-Why) and validating that corrective actions are robust and sustained across all applicable parts and production lines.
• Apply lean manufacturing and statistical quality tools — including SPC, Cpk trending, and process audits — to drive continuous improvement across the electrical supply base and eliminate sources of recurring defect.

**(This position can be hired as a Senior Supplier Development Engineer I or Senior Supplier Development Engineer II)**

QUALIFICATIONS YOU’LL BRING AS A SENIOR SUPPLIER DEVELOPMENT ENGINEER I 

• Minimum 5 years’ experience working in a regulated industry (Aerospace, Medical, Automotive, Industrial, or similar).
• Bachelor’s degree in Electrical Engineering, Manufacturing Engineering, or a closely related technical discipline.
• Working knowledge of APQP, PPAP, PFMEA, control plans, MSA, and statistical process capability (Cpk/Ppk).
• Experience conducting DFM reviews and translating design intent into manufacturing and quality requirements.
• Ability to read and interpret engineering drawings, schematics, wiring diagrams, and PCB layouts.

QUALIFICATIONS YOU’LL BRING AS A SENIOR SUPPLIER DEVELOPMENT ENGINEER II 

• Minimum 8 years’ experience working in a regulated industry (Aerospace, Medical, Automotive, Industrial, or similar).
• Bachelor’s degree in Electrical Engineering, Manufacturing Engineering, or a closely related technical discipline.
• Working knowledge of APQP, PPAP, PFMEA, control plans, MSA, and statistical process capability (Cpk/Ppk).
• Experience conducting DFM reviews and translating design intent into manufacturing and quality requirements.
• Ability to read and interpret engineering drawings, schematics, wiring diagrams, and PCB layouts.

WHAT MAKES A GREAT CANDIDATE:

Beyond technical qualifications, we are looking for someone who:

• Owns problems all the way to resolution — doesn’t hand off and walk away.
• Is proactive at suppliers, not reactive; identifies risks before they become escapes.
• Can translate complex engineering requirements into clear, actionable supplier expectations.
• Builds genuine working relationships with supplier technical teams and earns trust through competence.
• Communicates with clarity and urgency across internal engineering, procurement, quality, and program management.
• Thrives in a fast-paced, resource-constrained environment and makes high-quality decisions under schedule pressure.
• Brings intellectual curiosity about manufacturing — enjoys spending time on the shop floor understanding how things are made.

ADDITIONAL REQUIREMENTS:

• Willingness and ability to travel up to 40%, domestically and internationally, sometimes on short notice.
• Ability to work extended hours, some nights or weekends when needed.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Must be physically able to commute to buildings.
• Occasional exposure to dust, fumes, and moderate levels of noise.

NEUTRON 

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.

FLUID SYSTEMS ENGINEER II

A Fluid Systems Engineer II, Neutron leads the design, build, and test of their fluid systems across the Neutron launch vehicle. You will collaborate with and provide guidance to a team of engineers in the Fluid Systems department to turn vehicle-level requirements into a fluid network that enables Neutron to operate with aircraft-like reusability and reliability.

WHAT YOU’LL GET TO DO

• Perform trade studies and sizing – using hand-calcs, analytical models or test data – to define key elements of system architecture
• Provide guidance & mentorship to teammates on and beyond the fluids team to inform fluid system design, test & operations best practices
• Lead key fluid system design, manufacturing and test reviews
• Coordinate with component design, GSE, propulsion, GNC and other interrelated teams to solve multidisciplinary issues
• Create and maintain analytical models that characterize and predict system behavior under all relevant conditions
• Champion efforts to create and maintain piping and instrumentation diagrams, system CAD, production drawings, and system test and operations procedures
• Perform planning, analysis, and troubleshooting of system performance during real-time operations and post-test data reviews
• Project management including development schedules, vendor management, budgeting, etc.
• Create tools to enhance the team’s analysis capabilities, streamline workflow and optimize launch operations

YOU’LL BRING THESE QUALIFICATIONS:

• Bachelor’s degree in Mechanical Engineering or relevant engineering discipline
• 2+ years of experience designing, operating, troubleshooting fluids systems
• Strong engineering fundamentals in fluid dynamics and thermodynamics
• Solid understanding of fluid components such as valves, pressure vessels, flex elements & fittings
• Working knowledge of manufacturing, fabrication, integration processes & quality control relevant to fluid components (valves, flex hoses, tubing, bellows, etc.)

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 8+ years experience in a fast-paced aerospace environment where you have completed difficult projects while collaborating effectively with other key groups
• Ability to earn trust, maintain positive & professional relationships, & contribute to a culture of inclusion
• Experience working with a distributed team across the globe
• Advanced degree in a fluid mechanics-heavy field
• Experience with oxygen & methane systems
• Experience using fluids analysis tools such as REFPROP and GFSSP
• Experience using Siemens NX
• Experience using Python
• Proven ability to practically apply engineering fundamentals to solve real, complex problems
• Demonstrated ability to rally a team to make & execute good decisions in a fast-paced environment with information available

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise.

NEUTRON 

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.

SENIOR FLUID SYSTEMS ENGINEER I

A Senior Fluid Systems Engineer I, Neutron leads the design, build, and test of their fluid systems across the Neutron launch vehicle. You will collaborate with and provide guidance to a team of engineers in the Fluid Systems department to turn vehicle-level requirements into a fluid network that enables Neutron to operate with aircraft-like reusability and reliability.

WHAT YOU’LL GET TO DO

• Perform trade studies and sizing – using hand-calcs, analytical models or test data – to define key elements of system architecture
• Provide guidance & mentorship to teammates on and beyond the fluids team to inform fluid system design, test & operations best practices
• Lead key fluid system design, manufacturing and test reviews
• Coordinate with component design, GSE, propulsion, GNC and other interrelated teams to solve multidisciplinary issues
• Create and maintain analytical models that characterize and predict system behavior under all relevant conditions
• Champion efforts to create and maintain piping and instrumentation diagrams, system CAD, production drawings, and system test and operations procedures
• Perform planning, analysis, and troubleshooting of system performance during real-time operations and post-test data reviews
• Project management including development schedules, vendor management, budgeting, etc.
• Create tools to enhance the team’s analysis capabilities, streamline workflow and optimize launch operations

YOU’LL BRING THESE QUALIFICATIONS:

• Bachelor’s degree in Mechanical Engineering or relevant engineering discipline
• 5+ years of experience designing, operating, troubleshooting fluids systems
• Strong engineering fundamentals in fluid dynamics and thermodynamics
• Solid understanding of fluid components such as valves, pressure vessels, flex elements & fittings
• Working knowledge of manufacturing, fabrication, integration processes & quality control relevant to fluid components (valves, flex hoses, tubing, bellows, etc.)

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

• 8+ years experience in a fast-paced aerospace environment where you have completed difficult projects while collaborating effectively with other key groups
• Ability to earn trust, maintain positive & professional relationships, & contribute to a culture of inclusion
• Experience working with a distributed team across the globe
• Advanced degree in a fluid mechanics-heavy field
• Experience with oxygen & methane systems
• Experience using fluids analysis tools such as REFPROP and GFSSP
• Experience using Siemens NX
• Experience using Python
• Proven ability to practically apply engineering fundamentals to solve real, complex problems
• Demonstrated ability to rally a team to make & execute good decisions in a fast-paced environment with information available

ADDITIONAL REQUIREMENTS:

• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.
• Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.
• Must be physically able to commute to buildings
• Occasional exposure to dust, fumes and moderate levels of noise.

SUPPLY CHAIN 

NEUTRON  

Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! 

SENIOR WELDER

Based out of Rocket Lab Headquarters in Long Beach, California the Senior Welder will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines.  

WHAT YOU’LL GET TO DO:  

• Follow procedures to set up and operate our welding systems. 
• Weld assemblies according to work orders, blueprints and verbal instructions. 
• Follow blueprints and meet product specifications within tight tolerances. 

YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR WELDER:

• 8+ years of experience in welding with a focus on advanced techniques. 
• Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction. 
• Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO, D17.1). 
• Proficient in various welding techniques, including manual GTAW(TIG), OTW (Orbital Tube Welding), Laser Welding, Lathe Welding. 
• Ability to read and interpret blueprints, schematics, and welding symbols. 
• Experience welding on .011 - .250. 

THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 

• Experience with welding on different materials such as Inconel, Monel, Stainless 300-400 series.
• Experience working with 3D printed parts and exotic alloys. 
• Experience in metal fabrication and assembly.
• Experience with Deburring and using pencil grinders.
• Capable of doing welding fit ups.
• Capable of supporting the grinding department. 

CERTIFICATIONS

• Certified Welder. 
• Certifications in specialized welding processes (TIG / Brazing process). 
• Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel). 

ADDITIONAL REQUIREMENTS: 

• Willing to work Monday - Thursday (3:15pm - 1:45am) 
• Ability to travel and communicate outside of work hours
• Must be able to work extended hours and/or weekends as needed
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position. 
• Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. 
• Must be able to walk or stand for extended periods – 8 hours min 
• Must be able to lift up to 25lbs. unassisted. 

#RL1