Job Title: General Application

Company: Loenbro, LLC
Business Unit/Department: Midwest                                                
Location: Cedar Rapids, Iowa (On-site)
Employment Type: Full-Time

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries, and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care.

Job Summary
General Application for Mechanical, Electrical, Insulation, and Prefabrication. Specific Job duties will be discussed during interview.

Essential Job Responsibilities:

Read and interpret blueprints, one‑line diagrams, schematics, and installation plans.

Follow approved Methods of Procedure (MOPs) and company safety protocols; maintain accurate work records and service documentation.

Operate power tools, grinders, frills, impact guns, saws, and torches safely.

Maintain site housekeeping, barricades, and safety set ups in work areas.

Assist with erection of platforms, scaffolds, and supports as needed.

Report unsafe conditions or equipment to supervision immediately.

Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

GED or High School Diploma.

Ability to work from ladders and scaffolds.

Experience with operating heavy machinery (forklifts and man lifts).

Skilled in math which includes adding and subtracting fractions.

Comfortable climbing and working at elevations above 25 ft.

Able to pass preliminary and periodic drug testing.

Lifting necessary equipment and materials 1-50 pounds.

Preferred:

OSHA Training.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Walking on uneven terrain.
• Standing.
• Sit, stoop, crawl, and kneel.
• Exposure to areas with limited visibility.
• Use of respirator if position requires.
• Driving if required to travel.
• Potential exposure to extreme cold and hot temperatures.
• Fit and move in confined spaces including tanks and vessels.
• Limited working surfaces.
• Exposure to noise above 85 decibels and intense odors.
• Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights).
• Lifting necessary equipment and materials 1-50 pounds.
• If driving is required, a valid driver’s license and proof of insurability are required. All drivers are subject to a DMV background records search. 

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO)
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Título del puesto: Aplicación general

Empresa: Loenbro, LLC
Unidad/Departamento de Negocio: Medio Oeste                         
Ubicación: Cedar Rapids, Iowa (En situ)
Tipo de empleo: Tiempo completo

En Loenbro, no solo ofrecemos empleos, sino que construimos carreras basadas en la integridad, el trabajo en equipo, la excelencia y el propósito. Únete a un equipo donde tu experiencia sea valorada, tu crecimiento se apoye y tu trabajo ayude a mantener y mejorar la infraestructura crítica que impulsa a las comunidades de todo el país.

Sobre Loenbro

Loenbro es un socio de confianza y a largo plazo para el ciclo de vida de la construcción para miles de clientes en todo Estados Unidos. Nuestro mercado abarca todos los sectores y nuestra oferta de servicios incluye Eléctrica Crítica, Mecánica y Estructural, Manualidades, Inspección, Mantenimiento e Instalación Subterránea, y Fabricación. Nuestra especialidad consiste en simplificar lo complejo y establecer relaciones duraderas con nuestros socios. Tenemos presencia nacional pero un enfoque local: cada cliente se beneficia de nuestras capacidades y de nuestro cuidado.

Resumen del puesto Aplicación
general para mecánica, eléctrica, aislamiento y prefabricación. Las funciones específicas del puesto se discutirán durante la entrevista.

Responsabilidades esenciales del puesto

• Lee e interpreta planos, diagramas de una línea, esquemas y planes de instalación.
• Seguir los Métodos de Procedimiento (MOPs) aprobados y los protocolos de seguridad de la empresa; Mantener registros de trabajo y documentación de servicio precisos.
• Utiliza herramientas eléctricas, rectificadoras, adornos, pistolas de impacto, sierras y antorchas de forma Segura.

• Mantener el mantenimiento del lugar, las barricadas y los sistemas de seguridad en las zonas de trabajo.
• Ayuda con la instalación de plataformas, andamios y soportes según sea necesario.

• Reporta inmediatamente a la supervisión condiciones o equipos inseguros.
• Se pueden asignar otras tareas según sea necesario para apoyar las operaciones empresariales.

Requisitos mínimos

Requerido:

• GED o Diploma de Secundaria.
• Capacidad para trabajar desde escaleras y andamios.
• Experiencia con la operación de maquinaria pesada (carretillas elevadoras y elevadores de hombre).
• Experto en matemáticas, lo que incluye sumar y restar fracciones.
• Cómodo escalando y trabajando a altitudes superiores a 25 pies.
• Capaz de superar pruebas preliminares y periódicas de drogas.

• Levantar el equipo y materiales necesarios entre 1 y 50 libras.

Preferido:

• Formación OSHA.

Demandas físicas y entorno laboral

Las exigencias físicas y el entorno laboral descritos aquí son representativos de aquellos que debe cumplir un empleado para desempeñar con éxito las funciones esenciales de este trabajo. Se pueden hacer adaptaciones razonables para permitir que las personas con discapacidad desempeñen las funciones esenciales.

Entorno laboral:

• Caminar por terreno irregular.
• En pie.
• Siéntate, engáchate, gatea y arrodilla.
• Exposición a zonas con visibilidad limitada.
• Uso de respirador si la posición lo requiere.
• Conducir si es necesario para viajar.
• Posible exposición a temperaturas extremas de frío y calor.
• Acomodar y moverse en espacios reducidos, incluyendo tanques y embarcaciones.
• Superficies de trabajo limitadas.
• Exposición a ruidos superiores a 85 decibelios y olores intensos.
• Subir y bajar escaleras y escaleras para entrar y salir de zanjas y subir a plataformas elevadas (andamios a alturas significativas).
• Levantar el equipo y materiales necesarios entre 1 y 50 libras.
• Si se requiere conducir, se requiere un carné de conducir válido y una prueba de asegurabilidad. Todos los conductores están sujetos a una búsqueda de antecedentes en el DMV.

Este puesto requiere el cumplimiento de todas las normativas de seguridad aplicables, los requisitos de equipos de protección individual (EPP) y las políticas de Salud y Seguridad Ambiental (EH&S) de Loenbro.

Beneficios

Loenbro ofrece un salario competitivo, un paquete de beneficios integral y recompensas para quienes se unan a nuestro equipo:

• Seguro médico, dental y de vision.
• Plan de jubilación 401(k) con aportación de la empresa.
• Días libres pagados (PTO).
• Seguro de vida e incapacidad.
• Oportunidades de desarrollo profesional y formación.
• Programa de asistencia al empleado (EAP).

La elegibilidad para los beneficios puede variar según la clasificación laboral y las horas trabajadas.

Guiados por Valores Fundamentales (LEAD), basados en la determinación y el compromiso con la excelencia, Loenbro mejora a nuestras familias, clientes y comunidades  locales.  Si estás listo para formar parte de una empresa que LIDERA por:

• Vivir con integridad.
• Superando las expectativas.
• Actuar con urgencia.
• Ofrecer excelencia.

… Queremos saber de ti.

Loenbro es un empleador que ofrece igualdad de oportunidades.

Position:         Quality Control Inspector

Company:       Loenbro Midwest

Reports To:     Regional Quality Manager  

Location:         Cedar Rapids, Iowa

Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first.

We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at www.loenbro.com to learn more about our organization and who we are.

Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team’s aligned goals are met.  Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond

Job Duties:

• Weld Map Isometric drawings.
• Enter welding and inspection information into tracking tools.
• Assist with pressure testing plans and functions.
• Review and File NDE/NDT Reports.
• Work with NDE personnel for planning and execution of work.
• Assemble and review project documentation packages.
• Perform and document inspections based on drawings, specifications, and procedures to determine compliance.
• Perform weld inspections.
• Review welding requirements and ensure welding procedures comply.
• Create and implement Project Quality Assurance Plans.
• Provide support and training to other inspectors.
• Write inspection and assess plans (I&TP’s).
• Committed to Loenbro’s core values and safety policies.

Skills/Qualifications:

• Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam.
• Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours.
• Well-rounded with ASTM standards and materials.
• Efficient in Microsoft Excel and Word.
• Ability to communicate effectively with co-workers Quality Control Inspector.
• Excellent interpersonal written and verbal communication skills.
• Elevated level of organizational skills.
• Extensive knowledge of reading and understanding drawings.
• Must be a quick learner and motivated.
• Ability to travel and relocate as needed.
• Initiative-taking with the drive to learn and grow.
• Must be able to work as a team.

Work Environment:

• This position may require travel to various project sites.
• Ability to work in a fast-paced environment and adapt to changing project requirements.
• Occasional evening and weekend work may be required to meet project deadlines.

Potential Hazards:

• Outside most of the time
• Potential exposure to extreme cold and hot temperatures
• Manufacturing and refining environment
• Fit and move in confined spaces including tanks and vessels
• Limited working surfaces
• Exposure to noise above 85 decibels and intense odors
• Exposure to areas with limited visibility
• Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights)
• Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks
• Potential or Periodic amounts of time for the following:
• If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. 

Essential Requirements:

• Walking on uneven terrain, with an average of 2 miles per day
• Standing
• Sit, stoop, crawl, and kneel
• Use of respirator if position requires
• Driving if required to travel

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Job Title: Commissioning Manager PEIC

Company: Loenbro, LLC 
Business Unit/Department: Loenbro Midwest  
Location: Cedar Rapids, Iowa / On-site 
Reports to:  CX Manager 
Employment Type: Full Time 

FLSA Classification: Exempt 

About Loenbro 

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care. 

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation. 

Position Summary

Loenbro, LLC seeks an experienced Commissioning Manager to lead commissioning for mission-critical data center electrical projects based in the Cedar Rapids, IA area. The Commissioning Manager will own end-to-end commissioning delivery (Level 1–5), establish a scalable Cx program, manage teams and third-party agents, and act as the primary client-facing commissioning authority to ensure reliable, safe, and contract-compliant turnover of electrical and integrated systems.

Key Responsibilities

• Commissioning Leadership: Lead planning, scheduling, coordination, and execution of all commissioning phases (Level 1–5) on assigned projects.
• Program Development: Establish a scalable commissioning program with SOPs, document control workflows, templates, and commissioning protocols tailored to mission-critical demands.
• Team Management: Build, mentor, and lead a high-performing commissioning team comprising internal staff and third-party agents; assign responsibilities and ensure alignment with project objectives.
• Client & Stakeholder Interface: Serve as primary commissioning point of contact for clients, engineers, GCs, and vendors; facilitate regular progress meetings and commissioning updates.
• Technical Review & Test Execution: Review electrical and mechanical designs for commissioning impact; develop and execute pre-functional and functional test plans, energization sequences, and integrated systems testing protocols.
• Load Banking & Energization Lead: Act as team leader for Load Banking and Energization activities, coordinating pre-planning, execution, and documentation with internal and external stakeholders.
• Documentation & Turnover: Ensure commissioning documentation (checklists, redlines, test scripts, issue logs, deficiency tracking, closeout reports) is organized, complete, and delivered for each contract.
• Safety & Quality: Enforce strict adherence to safety protocols during all commissioning phases; coordinate with Safety, QA/QC, and Field Operations to identify and mitigate commissioning risks.
• Continuous Improvement: Lead post-project reviews to capture lessons learned and incorporate feedback into updated commissioning standards and training for scalability.
• Cross-Functional Collaboration: Work closely with Project Management, Field Operations, Safety, QA/QC, Engineering, and Clients through construction, turnover, and initial operations.

Required Qualifications

• Experience: 8+ years of commissioning experience on mission-critical data center electrical systems, with demonstrated leadership of Levels 1–5 commissioning.
• Technical Knowledge: Strong understanding of UPS, switchgear, switchboards, PDUs, transfer schemes, generators, ATS, BESS, mechanical interfaces, controls, and integrated systems testing.
• Certifications: CxA or similar commissioning certification preferred; electrical or engineering license a plus.
• Education: Associate or bachelor’s degree in electrical engineering, mechanical engineering, construction management, or related field, or equivalent practical experience.
• Project Experience: Proven track record leading load bank testing, energization sequences, and high-voltage commissioning on large-scale data center projects.
• Software & Documentation: Proficiency with commissioning software, MS Office, scheduling tools, and document control systems.

Core Skills and Competencies

• Leadership: Team building, delegation, and stakeholder management.
• Communication: Clear client-facing communication, meeting facilitation, and technical reporting.
• Organization: Strong document control, test-plan development, and issue-tracking skills.
• Risk Management: Safety-first mindset with ability to identify, mitigate, and escalate commissioning risks.
• Problem Solving: Rapid troubleshooting during pre-functional, functional, and integrated systems tests.
• Adaptability: Ability to scale processes across multiple concurrent projects and adjust to evolving technical requirements.

Work Environment:

• This position may require travel to various project sites.
• Ability to work in a fast-paced environment and adapt to changing project requirements.
• Occasional evening and weekend work may be required to meet project deadlines.

Potential Hazards:

• Outside most of the time
• Potential exposure to extreme cold and hot temperatures
• Manufacturing and refining environment
• Fit and move in confined spaces including tanks and vessels
• Limited working surfaces
• Exposure to noise above 85 decibels and intense odors
• Exposure to areas with limited visibility
• Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights)
• Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks
• Potential or Periodic amounts of time for the following:
• If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. 

Essential Requirements:

• Walking on uneven terrain, with an average of 2 miles per day
• Standing
• Sit, stoop, crawl, and kneel
• Use of respirator if position requires
• Driving if required to travel

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Job Title: Electrical Instructor

Company: Loenbro, LLC
Business Unit/Department:                                                                     
Location:  Cedar Rapids, IA
Reports to: Electrical Training Manager
Employment Type: Full Time
FLSA Classification: Exempt

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care.

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation.

Job Summary
The Electrical Trainer is responsible for the design, delivery, coordination, and evaluation of electrical training programs in one or more states (AZ, CO, IA, MT, WY currently). You will play a key role in developing Loenbro’s craft workforce by delivering high-quality training, coaching, and technical development to apprentices and field professionals. This position prefers you have proficiency in both English and Latin American Spanish to meet the needs of a diverse workforce. In your role, you will apply your advanced electrical knowledge, professional judgment, curriculum planning, and independent decision-making to support Loenbro’s apprenticeship programs and workforce development strategy. The Bilingual Electrical Trainer will deliver technical instruction in both English and Latin American Spanish, oversees multi-state apprentice cohorts, evaluates employee performance, and ensures training programs meet internal and regulatory standards. This role functions as a subject matter expert, owns key training processes, and provides guidance that influences hiring, promotion, and progression decisions

Essential Job Responsibilities

• Manage multiple levels of Loenbro's electrical apprentice training using the NCCER curriculum, including: classroom instruction, scheduling, payroll coordination, material ordering, and record keeping.
• Deliver learning content in both English and Latin American Spanish.
• Provide job-specific training such as NEC code updates, NFPA 70e, and other required electrical/safety instruction.
• Maintain a professional, supportive, and structured classroom environment.
• Conduct electrical assessments to identify knowledge gaps, training needs, and curriculum updates for incoming candidates.
• Coach and mentor employees helping them advance through their apprenticeship levels and career pathways.
• Develop and track key performance indicators (KPIs) to measure training effectiveness, skill progression, and credential attainment.
• Hold weekly one-on-one check-ins with students and maintain training logs
• Coordinate employee certifications and re-certifications, ensuring timely completion and compliance.
• Follow and enforce all Loenbro safety policies and report unsafe conditions to leadership.
• Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

• 5-7 years of experience as an Industrial or Commercial Electrician, preferably with experience leading crews.
• Strong understanding of electrical systems, components, installation practices, and troubleshooting.
• Experience mentoring or training apprentices or field teams.
• High school diploma required; technical certifications, journeyman/master credentials, or NCCER qualifications.
• Bilingual Fluency (English/Spanish) is required.

 Preferred:

• Foreman-level and above strongly preferred.
• NCCER Certified Instructor or willingness to obtain certification.
• Bilingual in English and Latin American Spanish (spoken and written).
• Previous experience managing or facilitating trade training programs.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

 Work Environment:

• Indoor office setting with controlled temperature.
• Ability to lift 50 lbs. regularly and perform physical activities such as standing, walking, and bending for extended periods.
• Potential visits to outdoor industrial sites with exposure to weather extremes.
• Potential exposure to noise, dust, chemicals, or other environmental factors.
• Travel requirements: up to 10% of time.
• Some weekend days are required.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

This posting will be expected to close on or around 4/20/2026

Job Title: Journeyman Electrician — Commissioning Support

Company: Loenbro, LLC 
Business Unit/Department: Loenbro Midwest  
Location: Cedar Rapids, Iowa / On-site 
Reports to:  CX Manager 
Employment Type: Full Time 

About Loenbro 

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries, and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care. 

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation. 

Position Summary

Loenbro, LLC is seeking an experienced Journeyman Electrician to lead field switching and commissioning support for mission-critical data center projects in the Cedar Rapids, IA area. The Journeyman Electrician will supervise electrical crews during First Time Energization, switching and AutoLOTO activities, load bank operations, and Level 3–5 commissioning support while enforcing safety, executing approved procedures, and ensuring clean turnover documentation.

Key Responsibilities

• Execute field commissioning tasks including First Time Energization, switching/LDL for AutoLOTO, minor issue resolution, equipment start-up switching, load bank connection and removal, and general Level 3–5 support.
• Perform and follow approved Methods of Procedure (MOPs) for all Level 3–5 activities.
• Execute AutoLOTO requests and maintain accurate lockout/tagout records for project electrical systems.
• Carry out pre-functional and functional test plans, energization sequences, and integrated systems testing in compliance with approved plans and permits.
• Follow and enforce safety protocols; coordinate with Safety, QA/QC, and Field Operations to mitigate commissioning risks.
• Participate in post-project reviews and incorporate lessons learned into field practices.

Required Qualifications

• Iowa state electrical licensing in good standing or reciprocal licensing from AK, AR, CO, MN, MT, NE, NH, ND, OK, SD, TX, WI, or WY.
• Certifications: NFPA 70E and OSHA 30.
• 7+ years of commercial or industrial electrical field experience; data center commissioning experience is highly preferred.
• Proficient with switching practices, LOTO procedures, load bank operations, and MOP adherence.

Working Conditions

• Based in the Cedar Rapids, IA area with regular onsite construction presence; regional travel as needed.
• Work near energized equipment; must wear required PPE and perform physically demanding tasks including climbing and lifting.
• Operate in active construction environments with strict safety standards.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Job Title: Switching Foreman CAP

Company: Loenbro, LLC 
Business Unit/Department: Loenbro Midwest  
Location: Cedar Rapids, Iowa / On-site 
Reports to:  CX Manager 
Employment Type: Full Time 

About Loenbro 

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries, and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care. 

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation. 

Position Summary

Loenbro, LLC is seeking an experienced Electrical Switching Foreman to lead field switching and commissioning support for mission-critical data center projects in the Cedar Rapids, IA area. The Electrical Switching Foreman will supervise electrical crews during First Time Energization, switching and AutoLOTO activities, load bank operations, and Level 3–5 commissioning support while enforcing safety, executing approved procedures, and ensuring clean turnover documentation.

Key Responsibilities

• Field Leadership: Lead electrical crews in field commissioning activities including First Time Energization, switching/LDL for AutoLOTO, minor issue resolution, equipment start-up switching, load bank connection and removal, and general support for Level 3–5 commissioning.
• MOP Execution: Execute approved Methods of Procedure for all Level 3–5 activities and ensure crews follow the exact procedural steps.
• AutoLOTO Review and Execution: Review, validate, and execute AutoLOTO requests for all project electrical systems during Level 3–5 commissioning phases.
• Test and Energization Oversight: Lead the field team through FTE, pre-functional and functional test plans, energization sequences, and integrated systems testing protocols in compliance with approved plans and permits.
• Meeting Participation: Attend and contribute to regular progress meetings and commissioning updates to ensure alignment with the project Cx plan.
• Safety and Coordination: Enforce strict adherence to safety protocols during all commissioning phases and coordinate with Safety, QA/QC, and Field Operations to identify and mitigate commissioning risks.
• Continuous Improvement: Participate in post-project reviews to capture lessons learned and incorporate feedback into updated commissioning standards and field practices.
• Documentation: Maintain accurate, auditable logs of switching activities, AutoLOTO records, MOP signoffs, and commissioning support notes for turnover and compliance.

Required Qualifications

• Experience: 5+ years of electrical field experience on mission-critical or industrial projects with hands-on switching, LOTO, and commissioning support; proven track record with Level 3–5 activities preferred.
• Technical Knowledge: Strong understanding of switchgear operation, transfer schemes, LV and MV switching practices, load bank procedures, and commissioning test support.
• Certifications: NFPA 70E and relevant safety certifications preferred; AutoLOTO or switching authority credentials a plus.
• Education: High school diploma or equivalent required; technical diploma or vocational training in electrical technology preferred.
• Communication: Clear, firm communicator with experience directing crews, coordinating with multiple stakeholders, and documenting switching activities.

Core Skills and Competencies

• Leadership: Direct crew activities, assign tasks, and maintain on-site discipline and procedural compliance.
• Safety Focus: Uncompromising safety-first mindset and ability to enforce energized-work controls.
• Attention to Detail: Accurate execution of MOPs and meticulous record keeping for AutoLOTO and switching logs.
• Situational Awareness: Sound judgment during energization and testing; ability to escalate safety or technical issues immediately.
• Collaboration: Work closely with Commissioning teams, Energy Marshalls, Field Operations, Safety, QA/QC, and client representatives.

Work Environment:

• This position may require travel to various project sites.
• Ability to work in a fast-paced environment and adapt to changing project requirements.
• Occasional evening and weekend work may be required to meet project deadlines.

Potential Hazards:

• Outside most of the time
• Potential exposure to extreme cold and hot temperatures
• Manufacturing and refining environment
• Fit and move in confined spaces including tanks and vessels
• Limited working surfaces
• Exposure to noise above 85 decibels and intense odors
• Exposure to areas with limited visibility
• Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights)
• Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks
• Potential or Periodic amounts of time for the following:
• If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. 

Essential Requirements:

• Walking on uneven terrain, with an average of 2 miles per day
• Standing
• Sit, stoop, crawl, and kneel
• Use of respirator if position requires
• Driving if required to travel

Benefits 

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team: 

• Medical, dental, and vision insurance 

• 401(k) retirement plan with company match 

• Paid time off (PTO) and holiday pay 

• Life and disability insurance 

• Professional development and training opportunities 

• Employee assistance program (EAP) 

Benefits eligibility may vary based on employment classification and hours worked. 

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by: 

• Living with Integrity 

• Exceeding Expectations 

• Acting with Urgency 

• Delivering Excellence 

…we want to hear from you. 

Loenbro is an Equal Opportunity Employer 

Position: EHS Coordinator II    

Company: Loenbro Industrial Services

Reports To: EHS Manager        

Position Overview: The EHS Coordinator II plays an essential role in establishing and promoting a culture of safety within the Industrial Services specific sites they are assigned, focusing on compliance with both internal EHS policies and external regulatory requirements. This position involves overseeing EHS protocols at a specific site, ensuring the site adheres to the highest standards of workplace safety and health. By conducting regular audits, providing training, and implementing EHS programs, the EHS Coordinator II works to minimize risks, reduce workplace accidents, and maintain a safe, healthy environment for all employees. Through collaboration with various departments and site leadership teams, this role supports the organization’s commitment to safety, demonstrating the importance of proactive measures in safeguarding the well-being of its workforce.

Job Duties:

Training and Education

• Assist with EHS training programs for all employees at the site, including but not limited to emergency response, hazardous material handling, and equipment safety.
• Ensure employees arriving at the site have the required industry specific training, i.e. OSHA or MSHA training.
• Assist in performing new hire orientations, hazard awareness training, and other training as required.
• Assist in coordinating and participate in and/or conduct daily safety meetings, provide educational materials, and assist with drills to enhance employee awareness of EHS procedures and regulations on job sites and office facilities.
• Apply leadership skills in an engaging fashion to continually develop and improve every team member’s hazard recognition skill and hazard mitigation protocols and knowledge base.
• Document and store all training and education materials onsite and within KPA.

Enforcing EHS Policies and Procedures

• Applies all policies in a consistent fashion to facilitate a safety culture whereby hazard recognition and hazard elimination/mitigation is always the first task in every activity.
• Implement and enforce EHS protocols, including company policies, the Site Safety Plan (SSP), client guidelines, and relevant federal regulations (OSHA, MSHA).
• Regulatory Compliance – Perform continual monitoring of job site and work habits to ensure compliance with company and regulatory health and safety regulations. Inspections consist of, but are not limited to: Lockout-Tagout, Required Permits and other job forms, Work Habits, Facility Inspections, and Construction Site Inspections.

Incident Investigations/Record Keeping and Reporting

• Lead and/or participate in the investigation of incidents at the site, ensuring thorough documentation, identification of root causes.
• Ensure injured employees are provided appropriate care in a timely manner including but not limited to utilization of CORE Occupational Medicine.
• Ensure adequate and proper documentation and implementation of corrective actions is obtained and loaded into KPA.
• Utilize KPA reporting including but not limited to Safety Alerts, Incident Investigation reports, Root Cause Analysis, etc.
• Work with operations and EHS management team to determine actionable items related to incidents and enforce completion.

Coordination with Operations

• Communication – Establish a firm communication system between site operations and H&S by being available and responsive to requests from field employees and managers.
• Works closely with the site operations team to facilitate and maintain a culture where safety “is who we are”. Enable and facilitate a setting where the entire organization is engaged to achieve behavior based safe work excellence.
• Acts to ensure safety team is a constructive partner with the operations team and is a resource to operations.
• Interfaces with customer’s safety team on a frequent basis. Closely align company systems with customer requirements.

Performing Site Inspections, Audits, and Monitoring

• Conduct and document daily inspections and audits to identify EHS violations, potential hazards, or non-compliance with EHS regulations.
• Promptly address issues, provide solutions, and implementation of corrective actions.
• Perform daily safety reports to provide important day to day data to site EHS and project management.

Maintaining EHS Records and Documentation

• Meticulously keep accurate and ensure timely input of records into appropriate locations such as KPA.
• Assist EHS Management (Area, Regional, Corporate, etc.) with data gathering, analytics, and creation of daily, weekly, monthly safety meeting topics and documentation.

Liaising with Regulatory Agencies

• Ensure compliance with local, state, and federal safety regulations.
• Engage with regulatory agencies, participate in inspections, and facilitate audits to uphold EHS standards.
• Ensure proper documentation and notification of all citations and assist in implementation of corrective actions and preventative measures.

Continuous Improvement of EHS Practices

• Stay informed about industry best practices and emerging EHS technologies.
• Collaborate with Site/Area Management to identify opportunities for enhancing EHS measures and implementing new strategies for improved EHS performance.
• Provide feedback from the field to aid in process improvement and implementation progress.
• All other duties as assigned by the Regional or Area EHS Manager

 Skills/Qualifications:

• Construction Site Safety Technician (CSST) or equivalent and OSHA 30 required.
• Minimum 3 years prior experience working within the heavy industrial construction industry, including manufacturing, pipeline, mining, food and beverage, power, and refining environments with at least 2 years in a safety role.
• Working knowledge of OSHA regulations, standards, and other applicable codes/regulations.
• Excellent verbal and written communication skills.
• Ability to assess potential hazards and risks within operations and develop and implement strategies to mitigate them effectively.
• Understanding of and ability to learn incident investigation techniques and root cause analysis to identify underlying issues and develop solutions to prevent future occurrences.
• Ability to understand emergency response plans and procedures and ensuring readiness for potential emergencies.
• Ability to build relationships and collaborate with employees at all levels of the organization, as well as external stakeholders such as regulatory agencies and contractors.
• MSHA Certification or background preferred.
• Familiarity with risk assessment methodologies such as Job Safety Analysis (JSA) or Hazard and Operability Study (HAZOP) to ensure comprehensive EHS practices.
• Experience in conducting EHS audits or inspections to identify and address potential safety hazards.
• Certification in First Aid/CPR, demonstrating the ability to respond effectively to safety incidents requiring immediate medical attention.
• Proficiency in using MS Office applications (Word, Excel, Outlook, and PowerPoint) for documentation and reporting purposes.
• Ability to use safety management software for reporting and documentation requirements.

Physical Requirements:

• Ability to Climb up and down stairs and ladders.
• Ability to stand and walk for long periods of time
• Ability to traverse difficult terrain such as getting in and out of trenches/excavations and up to elevated platforms (scaffolding at significant heights)
• Lifting necessary equipment and materials 1-50 pounds,
• Driving to travel (valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search.)

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Job Title: QA/QC Tech

Loenbro Mission Critical aims to provide cutting-edge electrical infrastructure for mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. As a Loenbro company, we live by the values that foster integrity, quality craftsmanship, and community. An Electrical Superintendent is a critical member of the project execution team.

Job Description:

As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence.

Responsibilities:

• Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications.
• Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements.
• Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems.
• Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients.
• Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations.
• Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner.
• Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence.

Qualifications:

• 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable.
• Degree in Electrical Engineering, Quality Control, or a related field (Preferred).
• Strong knowledge of electrical codes, industry standards, and regulations.
• Exceptional attention to detail and strong analytical skills.
• Effective communication and documentation skills.
• Proficiency in the use of testing equipment and tools.
• Ability to work independently and as part of a collaborative team.
• Commitment to safety, quality, and continuous improvement.
• OSHA10 or higher and other safety certifications are highly preferred. 

Work Environment:

• This position may require travel to various project sites.
• Ability to work in a fast-paced environment and adapt to changing project requirements.
• Occasional evening and weekend work may be required to meet project deadlines.

Potential Hazards:

• Outside most of the time
• Potential exposure to extreme cold and hot temperatures
• Manufacturing and refining environment
• Fit and move in confined spaces including tanks and vessels
• Limited working surfaces
• Exposure to noise above 85 decibels and intense odors
• Exposure to areas with limited visibility
• Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights)
• Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks
• Potential or Periodic amounts of time for the following:
• If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. 

Essential Requirements:

• Walking on uneven terrain, with an average of 2 miles per day
• Standing
• Sit, stoop, crawl, and kneel
• Use of respirator if position requires
• Driving if required to travel

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Project Engineer

Loenbro Mission Critical

Cedar Rapids, IA

Position Overview:

Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector.

Loenbro is currently looking for a Project Engineer to join the team. You will be a key member of our project management team, responsible for overseeing and managing the technical aspects of mission-critical and data center projects. Your expertise in electrical engineering and project management will contribute to the successful execution of projects.

Responsibilities:

• Project Planning: Collaborate with Project Managers to develop project plans, including scope, schedule, and budget.
• Technical Expertise: Utilize your electrical engineering knowledge to design, review, and ensure the proper installation of electrical systems, adhering to industry standards and best practices.
• Documentation: Create and maintain accurate project documentation, including technical drawings, specifications, and reports.
• Coordination: Coordinate with project teams, contractors, and subcontractors to ensure the smooth execution of projects.
• Quality Assurance: Conduct inspections and quality control checks to ensure that all work meets safety regulations and quality standards.
• Problem Solving: Address technical challenges and issues as they arise during the project, proposing effective solutions.
• Client Interaction: Interact with clients to understand their technical requirements and provide technical support and expertise as needed.

Qualifications:

• 1-3 years of experience as a project engineer, preferably in the electrical construction industry.
• Bachelor’s degree in electrical engineering or a related field (preferred).
• Strong technical knowledge of electrical systems and engineering principles.
• Proficiency in AutoCAD or other design software.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and decision-making abilities.
• Commitment to safety and quality.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Frequent visits to outdoor construction sites with exposure to weather extremes.
• Potential exposure to noise, dust, chemicals, or other environmental factors.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Journeyman Electrician (Licensed)

Loenbro Mission Critical

Cedar Rapids, IA

Summary

Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting-edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector.

Loenbro Mission Critical is seeking experienced Journeyman Electricians to support installation, commissioning, troubleshooting, and service of mission‑critical data center electrical systems. You will work safely to code, follow approved procedures, and collaborate with project teams to deliver high‑quality results.

Key Responsibilities

• Perform installations, startups, troubleshooting, commissioning, and preventative maintenance for electrical systems per drawings and codes.
• Execute First Time Energization (FTE), switching, AutoLOTO, load‑bank connections/removals, and Level 3–5 commissioning support.
• Read and interpret blueprints, one‑line diagrams, schematics, and installation plans; lay out conduit, cable tray, and devices.
• Follow approved Methods of Procedure (MOPs) and company safety protocols; maintain accurate work records and service documentation.
• Support and mentor apprentices; coordinate with Foreman, Superintendents, project management, and clients.
• Diagnose issues, respond to service calls, recommend improvements, and complete acceptance testing.
• Participate in post‑project reviews and incorporate lessons learned.

Qualifications

• Licensed Journeyman Electrician with 7+ years of commercial/industrial experience; successful apprenticeship required.
• Seeking Iowa state electrical licensing in good standing or reciprocal licensing from AK, AR, CO, MN, MT, NE, NH, ND, OK, SD, TX, WI, or WY.
• Familiarity with data center systems, transfer schemes, switchgear, controllers, and pneumatic/electrical process controls.
• Proficient reading blueprints, one‑line diagrams, risers, and electrical schematics.
• Skilled with conduit bending tools, cable tray layout, device trim, and load‑bank operations.
• Strong communication, documentation, and teamwork skills; able to work independently as required.
• Must be 18+ and able to pass pre‑employment drug screen and background checks.

Working Conditions & Physical Requirements

• Regular onsite work in construction environments; exposure to varying temperatures, noise, heights, and confined spaces.
• Frequent climbing, lifting (up to 50lbs), standing, walking on uneven terrain, stooping, kneeling, and use of respirator when required.
• Regional travel between projects may be required.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer