Summary

Creates complex design of VIP aircraft monuments, and mechanisms to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.

Essential Duties and Responsibilities

• Designs complex monuments such as cabinets, bulkheads, vanities, lavatories, tables, divans, and other payload items.
• Designs complex mechanisms for tables, doors, drawers, divans and other moving features.
• Analyzes and interprets subsystem and project specifications.
• Selects materials for mechanical designs based on structural needs and materials specifications. Evaluates trade-offs in materials, hardness, composites, treatments, coatings, and other selections to best meet design objectives. Works with materials suppliers and material testing when needed.
• Applies experience and knowledge and works with Manufacturing Engineers to optimize designs for reduced parts counts, reduced manufacturing costs, reduced assembly error, and other factors affecting production cost and quality.
• Understands Bills of Materials, assembly concepts, fabrication specifications.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Maintains state-of-the-art knowledge in mechanical design practices, materials, components, and software design tools. Independently finds or creates solutions to problems requiring research, resourcefulness and creativity.
• Works with the Design Department to develop esthetic product designs that meet the market need and customer acceptance.
• Provides liaison engineering support.
• Supports test setups preparation and test reports development.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies:

To perform the job successfully, an individual should demonstrate the following competencies:

Greenpoint Core Competencies

• Adaptability – Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications – Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
• Dependability – Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative – Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork – Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality – Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

Job Core Competencies

• Judgment – Displays willingness to make decisions, exhibits sound and accurate judgment, supports and explains reasoning for decisions, includes appropriate people in decision-making process, and makes timely decisions.
• Planning and Organization – Prioritizes and plans work activities, uses time efficiently, plans for additional resources, integrates changes smoothly, sets goals and objectives, and works in an organized manner.
• Job Knowledge – Competent in required job skills and knowledge, exhibits ability to learn and apply new skills, keeps abreast of current developments, requires minimal supervision, displays understanding of how job relates to others, and uses resources effectively.

Summary of Education, Experience & Certification

Bachelor's degree (B.S.) in engineering, a minimum of 8 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience required.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company, foreign government, foreign governmental agency or organization, or a political asylee for legal compliance purposes.

Required Knowledge, Skills & Abilities

• Strong Computer Aided Drafting/Design skills, both 3D (Inventor preferred) and 2D (AutoCAD)
• Familiarity with industry standard practices, fasteners, materials, and component parts. As well as the ability to search and specify new supplied parts.
• Understanding of manufacturing methodologies, design-for-manufacturing and assembly, costing, and material selection.
• Knowledge of industry design, documentation, and drafting (ANSI Y14.5) standards.
• Understanding of mechanical motion modeling, and weight and balance analysis
• Ability to check engineering drawings for Fit, Form and Function.
• Ability to meet high expectations for meeting strict schedule, budget and technical solutions with minimal margin of error.
• Ability to adapt to tailored processes designed for prototype engineering (vs. production engineering)
• Broad and diverse knowledge of multiple disciplines:
  • Mechanical: lower and upper attached structure, monuments, ceilings, side walls, flooring, placards, OEM modifications, etc.
  • Avionics: Locating, provisioning, and installations for LRUs (electrical equipment).

• Ability to work independently and cross-functionally as part of an established and growing team.
• Strong communication and problem-solving skills.
• Strong time management and organizational skills.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.

Summary

Supports Program Manager with all aspects of Program Management.

Essential Duties and Responsibilities

• Comprehends contractual obligations and statement of work for assigned program(s) and provides guidance based on these documents to other program team members as required.
• Participates in program planning and documenting.
• Develops and maintains status and visibility tools.
• Assists with oversight and coordination of vendor activities and communication.
• Comprehends and monitors assigned aspects of a program and report status.
• Coordinates or assists with coordinating program reviews and meetings.
• Coordinates program related travel as required.
• Organizes and facilitates communications between the customer and appropriate GTI personnel.
• Provides leadership and coordination of team-based solutions to program issues.
• Develops methods and procedures for managing programs.
• Assists or takes primary role in developing or administering program change orders.
• Assists with part procurement and status as required.
• Assists in maintaining program financial health tools.
• Participates in risk identification and risk mitigation activities.
• Assists with final inspection (closing process) as required.
• Responsible for ensuring that assigned small-scale projects progress on schedule within budget and meets or exceeds minimum quality standards; this may include post delivery support.
• Assists in preparing and maintaining departmental policies, procedures and reporting.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Greenpoint Core Competencies

• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

Job Core Competencies

• Customer Service – Displays courtesy and sensitivity, manages difficult or emotional customer situations, meets commitments, responds promptly to customer needs, and solicits customer feedback to improve service.
• Planning & Organization – Prioritizes and plans work activities, uses time efficiently, plans for additional resources, integrates changes smoothly, sets goals and objectives, and works in an organized manner.
• Productivity – Meets productivity standards, completes work in timely manner, strives to increase productivity, works quickly and achieves established goals.
• Relationship Building –Builds rapport up, down, and across the organization, establishes collaborative relationships to achieve objectives, seeks win-win solutions to conflict, develops network of professional contacts, and displays empathy and tolerate diverse viewpoints.

Summary of Education, Experience & Certification

Bachelor's degree (B. S.) in Engineering or a related discipline from a four-year college or university and a minimum of four years related experience and/or training, or equivalent combination of education and experience.  Aerospace background and aircraft interior industry experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

Required Knowledge, Skills & Abilities

• Ability to work well independently and cross-functionally as part of an established and growing team.

• Demonstrates the interest and ability to grow within the program management function.
• Displays sound judgment, problem-solving skills and ability to function independently to accomplish tasks with minimal supervision.
• Strong communication, time-management and problem-solving skills.
• Ability to read, analyze and interpret the most complex documents. 
• Ability to respond effectively to the most sensitive inquiries or complaints. 
• Ability to write speeches and articles using original or innovative techniques or style. 
• Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management, public groups and/or boards of directors.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. 
• Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases. 
• Ability to deal with a variety of abstract and concrete variables.

• Demonstrated experience with Accounting, Database and Project Management software.
• Proficient in Microsoft Office applications with advanced Excel skills.

• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.

Summary

Finishes high-end aircraft cabinetry using polyester finish materials in a timely and efficient fashion ensuring quality standards are attained. Provides training to cabinet finishers. 

Essential Duties & Responsibilities

• Supports the mentorship and training of the cabinet finishers.
• Mixes stain to desired color match.
• Mixes and weighs chemicals.
• Matches color of customer approved sample.
• Stains hardwoods/veneers using various techniques to obtain color match.
• Sands hardwoods and veneers.
• Sands and buffs all cabinetry and all surfaces and high-gloss finishes.
• Sands between wash, build and finish coats.
• Flat sands larger panels.
• Masks off parts for paint and finish.
• Produces uniformity on pieces for aircraft ship set using stain.
• Monitors desired mill thickness of finish.
• Identifies and repairs imperfections.
• Repairs high gloss and satin finished surfaces.
• Sprays satin finish.
• Cleans final product.
• Works with aerospace materials consistently.
• Wears safety equipment as required and practices safety guidelines/procedures, including Hazardous Materials guidelines.
• Produces a quality product consistently.
• Interprets scheduling requirements to make adjustments as needed.
• Properly maintains and repairs spray equipment.
• Maintains a neat, organized work area and help with the general daily housekeeping of the department.
• Meets target hours and completes schedules as set by supervision.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Greenpoint Core Competencies

• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.
• Safety – You observe safety and security procedures, you determine appropriate action beyond guidelines, you use equipment and materials properly, and you report potentially unsafe conditions.

Summary of Education, Experience & Certification

Minimum of high school diploma or equivalent.  Requires a minimum of four years VIP aircraft cabinetry experience.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

Required Knowledge, Skills & Abilities

• Ability to lead and motivate team members towards project objectives.
• Ability to share lessons learned and company processes and procedures with new employees.
• Ability to share applicable knowledge and effectively train others.
• Ability to communicate in English (read, write, and verbally communicate).
• Ability to effectively communicate with all levels of employees.
• Mathematical knowledge and ability to apply towards problem solving.
• Ability to identify and operate proper tools for the task assigned.
• Exhibits hand-eye coordination skills.
• Identifies application for different surfaces and buffing procedures.
• Ability to read measuring instruments.
• Ability to travel as required.
• Ability to work outside of core business hours as required.

Physical Requirements

• Able to comply with DOT/FAA Drug and Alcohol Testing Program.
• Able to climb and work on step stools and/or ladders.
• Able to lift 25 lbs. without assistance/able to lift up to 100 lbs. with assistance.
• Able to reach overhead.
• Able to work in a non-dust-free environment (ability to wear a respirator).
• Normal or corrected vision (required to perform exacting tasks).
• Full range of motion with both hands.
• Can work in a stooping, kneeling, standing position and in cramped areas.

Personal Tool Requirements

NOTE: Although the company provides some tools, the production of Aerospace Interiors is a highly developed skill that requires many personal tools enabling an individual to construct quality items in a productive time frame.  Tools that may help improve the productivity and efficiency are Cordless Drills, pneumatic Drills, Angle Drills (Angle Drill suggested but not required), etc.

These tools must be obtained in a reasonable amount of time (6 month maximum) after initial employment.

Tool Box                                                     Utility Knife

Palm Sander                                               Pliers (regular & needle nose)

Putty Knife                                                  Screwdriver (Straight-Small to Medium)

Screwdriver (Philips #1 and #2)                    90 Degree Die Grinder

Socket Set

Shop Tool Operation

NOTE: An employee professing knowledge necessary to operate any machine on this checklist will be required to demonstrate these abilities.  No employee should operate equipment until another employee who has proven experience on the equipment in question has instructed the employee in the set up and operation.

The employee will be required to demonstrate the safe set-up and operation of the following items:

Die Grinder (Small buffer)                            Putty Knife

Spray Gun (Paint)                                        Spray Gun (Polyester)

Buffer (Large handheld)                               Air Brush

Bristle Paint Brush                                       Foam Paint Brush

Palm Sander                                               Syringe

Razor Blade                                                Block Sander (Various sizes)

Summary

An experienced CMF Designer who collaborates with the Design team, cross-functional stakeholders, and the Client to support the quality execution of VIP aircraft programs. This role ensures the integrity of the approved design intent is maintained across all phases of completion, from detailed development through production and delivery.

Essential Duties and Responsibilities

• Translate high-level design intent into clear, actionable direction for internal teams and suppliers.
• Collaborates with cross functional teams, including supply chain management, engineering, and manufacturing, in order to ensure the design intent is met and executed.
• Proactively address technical conflicts, material challenges, and constructability concerns.
• Support and participate in client meetings, reviews, and decision-making sessions.
• Maintains project material and fixture specification documents (MIDS and FIDS).
• Evaluate finishes, craftsmanship, and installations to ensure the required level of quality.
• Travels to inspect materials to ensure they meet quality and design intent, including monuments, leather, carpet, metals, veneers, and others, as required.
• Adheres to project schedules and budget.
• Maintain regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Greenpoint Core Competencies:

• Adaptability - Adapts to changes in the work environment, manages competing demands, accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence, and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

Job Core Competencies:

• Self-Management - Regulates impact of own emotions upon others, remains focused and energized under stress, accepts criticism, and recovers quickly from setbacks, projects realistic self-confidence in abilities.
• Design – Generates creative solutions, translates concepts and information into images, applies design principles, uses feedback to modify designs, demonstrates attention to detail.

Summary of Education, Experience & Certification

Bachelor's degree (B.A.) with 8+ years’ experience and/or training in high end architecture or interior design; or equivalent combination of education and experience.  Aviation background and aircraft interior experience is a plus, but not required.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

Required Knowledge, Skills & Abilities

• Thorough knowledge of Microsoft Suite Products
• Thorough knowledge of drafting interior elevations, cross sections, and architectural detailing is required
• Ability to work independently and cross-functionally as part of an established and growing team.
• Strong understanding of materials, fabrication methods, and certification constraints (flammability, durability, maintainability)
• Strong communication and time-management skills.
• Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
• Strong problem-solving skills, attention to detail, and motivation to learn.
• A self-starter with the ability to work independently and collaborate with team members throughout the design process.
• Ability to travel, as required.
• Ability to work outside of core business hours as required.

Summary

Receives, distributes, and maintains materials within stores and conducts inventory processes in a timely and efficient fashion ensuring quality standards are attained.

This is a temporary role, employed through an agency.

Essential Duties & Responsibilities

• Dispositions and resolves receiving/grief issues.
• Maintains inventory accuracy through daily spot checks and produces cycle count sheets.
• Responds to material requests from production.
• Supports Lead/Supervisor in organizing team members to meet program expectations as needed. Serves as backup for Lead/Supervisor as needed.
• Performs inspections on incoming materials to validate goods are as ordered and proper documentation has been provided and follows proper procedures to disposition discrepancies.
• Labels and identifies materials for quick retrieval and traceability within the stores warehouse.
• Enters receiving/issuing transactions into ERP system.
• Assists the Quality department with traceability requirements.
• Picks up and delivers materials from various locations as needed.
• Prepares and packages materials for shipment.
• Contributes to the materials management reporting systems to meet company requirements.
• Maintains a neat, organized work area and contributes to the daily housekeeping of the department.
• Wears safety equipment as required and follows safety guidelines/procedures.
• Properly adheres to training and GHS/SDS guidelines when handling Hazardous Materials.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Core Competencies

• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.
• Safety – You observe safety and security procedures, you determine appropriate action beyond guidelines, you use equipment and materials properly, and you report potentially unsafe conditions.

Summary of Education, Experience & Certification

Minimum of high school diploma or equivalent with demonstrated skills and three years’ experience. Experience in Aerospace industry preferred.  Valid driver license required.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

Required Knowledge, Skills & Abilities

• Ability to communicate in English (read, write, and verbally communicate).
• Mathematical knowledge and ability to apply towards problem solving.
• Ability to operate a forklift.
• Strong communication, time-management, and problem-solving skills.
• Proficient in Microsoft Office applications and ERP systems.
• Strong sense of ethics, character, and interpersonal skills.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.
• Ability to work well independently and cross-functionally as part of an established and growing team.
• Skills operating general office equipment such as computers, printers, scanners, and copiers.
• Familiar with basic Quality terms and concepts.
• Ability to travel as required.
• Ability to work outside of core business hours as required.

Physical Requirements

• Able to climb and work on step stools and/or ladders.
• Able to lift 25 lbs. without assistance / Able to lift up to 100 lbs. with assistance.
• Able to reach overhead.
• Able to work in a non-dust free environment.
• Normal or corrected vision (required to perform exacting tasks).
• Full range of motion with both hands.
• Can work in stooping, kneeling, standing position and in cramped areas.

Summary

Performs ongoing facility maintenance and completes repairs on equipment.   

Essential Duties & Responsibilities

• Performs and maintains facilities maintenance needs.
• Ensures the facilities are maintained in a clean and orderly manner prior to, and following work shift.
• Surveys condition of premises and equipment and reports needed repairs, safety hazards or conditions requiring outside vendor services.
• Completes maintenance forms, work order signoffs and other paperwork in a timely and accurate manner.
• Identifies/tags equipment and components as well as other company items for safe and secure storage
• Ensures that all work accomplished meets quality standards and specifications.
• Collects and disposes of waste fuel, oil, hydraulic and other hazmat items, as required.
• Keeps all work areas clean and organized, cleaning as you go.
• Uses and maintains company-provided tools and equipment. Returns items to designated storage area after use.
• Follows building and property security procedures.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Greenpoint Aerospace Core Competencies

• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.
• Safety – You observe safety and security procedures, you determine appropriate action beyond guidelines, you use equipment and materials properly, and you report potentially unsafe conditions.

Summary of Education, Experience & Certification

Minimum of High School diploma or equivalent and a minimum of three years’ experience preferred.

US Person Required - this position requires special access. A US Person is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes. 

Required Knowledge, Skills & Abilities

• Ability to communicate in English (read, write and speak).
• Ability to understand the methods, techniques and practices outlined on the manufacturers’ maintenance documents, specifications, and other data acceptable to maintain the facility and tooling.
• Displays good communication skills.
• Knowledge of the proper use of chemicals.
• Ability to follow instructions.
• Ability to work with all levels of the organization.
• Basic mathematical knowledge and ability to apply towards problem solving.
• Basic knowledge of building HVAC and plumbing.
• Basic knowledge of electrical systems.
• Ability to operate a forklift.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Knowledge of occupational hazards and safety rules and regulations.
• Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
• Ability to select and work with proper tools for job task.
• Possession of a valid state of Texas driver license.
• Ability to work well independently.
• Ability to travel as required.
• Ability to work overtime as required.

Physical Requirements

• Able to comply with DOT/FAA Drug and Alcohol Testing Program.
• Able to climb and work on step stools and/or ladders.
• Able to lift 50 lbs. without assistance/able to lift up to 100 lbs. with assistance.
• Able to reach overhead.
• Able to work in a non-dust-free environment.
• Normal or corrected vision (required to perform exacting tasks).
• Full range of motion with both hands.
• Can work in a stooping, kneeling or standing position and in cramped areas.