Motional’s Las Vegas office is located less than 10 miles from the Las Vegas strip at 730 E Pilot Road and is home to one of the largest fleets of self-driving vehicles. The city’s grid system of roads and being one of America’s “smart cities” allows for extensive research and development testing.

Mission Summary:

We are seeking a motivated Test Control Engineer to join our Team. In this strong intermediate level role, you will take full ownership of assigned tasks within defined test execution procedures and support the broader Test Engineering team in validating sophisticated autonomous systems. Working under the guidance of senior engineers, you will ensure our vehicles and systems are mission-ready through rigorous readiness checks, real-time monitoring, and low-level subsystem validation.

Key Responsibilities:

• Test Execution & Readiness: Take full ownership of assigned tasks within defined test procedures, including specific checklist items and system monitoring. Perform all pre- and post-test readiness checks completely, accurately, and on time. 
• Set up, configure, and operate AB Dynamics systems (GST, Launchpad), including target preparation and robot operation.
• Execute structured scenario-based testing using track infrastructure and robotic platforms.
• Subsystem Validation: Execute and support fault injection and low-level control testing for critical subsystems, including actuator-level behavior (throttle, brake, steering) against expected control responses and safety constraints.
• System Monitoring: Provide timely and accurate real-time monitoring of assigned system statuses during testing to ensure safe and successful execution.
• Technical Support: Execute basic configuration and setup of instrumentation and telemetry. Assist in on-vehicle and off-vehicle tests focusing on critical components such as control systems and perception.
• Utilize Vector tools (CANalyzer/CANoe) for live debugging, signal tracing, and post-test analysis.
• Documentation & Triage: Maintain accurate, organized, and complete logs of all test activities. 
• Analyze vehicle logs (CAN, telemetry, system logs) to identify anomalies and support root cause analysis (RCA).
• Collaborate directly with developers to reproduce issues and validate fixes.
• Issue Escalation: Promptly and clearly escalate all anomalies or issues to a senior engineer immediately upon detection.
• Simulation Support: Support testing within virtual environments, including Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) platforms.
  
  

Qualifications:

• Technical Proficiency: Proficiency with laptop computers, GSuite apps, and touchscreen smartphones. Strong familiarity with Linux environments and a general understanding of low-level vehicle control systems.
• Hardware & Tools: Basic exposure to automotive communication protocols (CAN, LIN, Ethernet) and tools like CANalyzer or CANoe for bus-level debugging.
• Programming & Data: Basic exposure to scripting languages such as Python, Bash/Shell, or SQL. Ability to analyze logs to assess system behavior.
• Communication: Proactive communicator who raises issues early and clearly with minimal prompting. Demonstrated ability to operate as a self-starter in fast-paced, ambiguous environments.
• Professionalism: Punctual, reliable, and a strong team player who works cooperatively as a supportive member of the test execution team.
• Operational Requirements: Must be able to safely maneuver around autonomous vehicles and multitask with various technologies. Ability to work flexible shifts (mornings, evenings, weekends, or overnights) and travel up to 15% with short notice. Hands-on work at test track environments is a core part of this role. Comfortable working around vehicles, hardware, and test equipment daily.
• Physical Demands: Must be able to sit for extended periods and occasionally lift or move up to 50 pounds. Must be comfortable working outdoors in various weather conditions.
• Driver’s License: A valid driver's license is required.
  
  

Preferred Qualifications:

• General awareness of industry safety standards such as ISO 26262 and ISO 21448 (SOTIF).
• Experience with automated test case execution.
• Experience with track-based testing using robotics platforms.
• Experience testing low-level vehicle control systems (body-controls, braking, steering)
  
  

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Working Environment:

The work environment characteristics described here represent those a team member encounters while performing the essential functions of this job.  Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the team member is regularly exposed to outside weather conditions, road conditions, and pedestrian traffic.  The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and airborne particles.  The noise level in the environment is low to moderate.

Motional AD LLC is an Equal Employment Opportunity employer, and we welcome all qualified applicants.  All applicants will receive impartial consideration regarding race, sex, color, national origin, age, disability, veteran status, genetic data, religion, gender identity, sexual orientation, or another legally protected status.  Motional AD LLC is a Drug-free workplace.

Motional is a leading autonomous driving company on a mission to make driverless vehicles a safe, reliable, and accessible reality. Backed by Hyundai Motor Group, Motional is at the forefront of the physical AI revolution. Motional isn’t just building first-of-its-kind technology; we are transforming transportation to create safer streets and more sustainable mobility options.

The Systems Readiness and Performance team is the crucial bridge between software development and real-world deployment. We are responsible for driving system design, for verifying and validating the autonomy stack, and for defining, measuring, and validating system performance targets. We work closely with stakeholders in autonomy, infrastructure, and operations to build the definitive safety case for the commercial launch of our fully driverless IONIQ 5 robotaxis in Las Vegas later this year.

We are seeking a highly skilled Software Engineer to play a critical role in evaluating and improving the performance of our autonomous vehicle (AV) technology. This engineer will be responsible for developing and implementing metrics and software tools, primarily using Python, to effectively measure, analyze, and report on the performance of our AV systems. Their work will directly contribute to accelerating the development of safe and reliable autonomous technologies by transforming complex AV data into actionable insights for the organization.

What You'll Be Doing:

• Design AV Performance Analysis Pipelines: Define, design, and implement key pipelines to extract on-road or simulated events and evaluate autonomous vehicle performance (e.g., lane change capability, oscillation/braking metrics, VRU emergence from occlusion).
• Develop Metrics Software and AI-Powered Tools: Leverage strong Python skills to develop frameworks, AI-powered tools, and systems for calculating, aggregating, and visualizing AV performance metrics from large datasets.
• Collaborate Cross-Functionally: Work with systems, software, AI, controls, simulation, and validation teams to understand needs and improve systems like Perception, Prediction, and Planning.
• Ensure Data Quality and Validation: Implement rigorous checks and validation processes to ensure the accuracy and integrity of data used for performance evaluation.
• Document and Share Knowledge: Create clear documentation for metrics and analysis tools, and share best practices with the engineering team.
• Advance Technical Expertise: Proactively evaluate and integrate new technologies and methodologies relevant to autonomous vehicles and software engineering.
  
  

What We're Looking For:

• 5+ years of software engineering experience and a Bachelor's degree in Computer Science or a related field; a Master's degree is a plus.
• Expert-level proficiency in Python and a strong understanding of modern software development principles and best practices.
• Strong analytical and problem-solving skills, particularly in the context of complex system performance evaluation and data analysis.
• Proficient with Git and standard version control workflows.
• Excellent communication and collaboration skills, with the ability to effectively communicate technical concepts and results to diverse audiences (engineers, product managers, leadership).
• Proven ability to work both independently and effectively as part of a multidisciplinary team.
• Strong attention to detail and a commitment to data quality, accuracy, and rigorous testing.
• Comfortable working in a fast-paced, agile, continuous integration/continuous delivery (CI/CD) environment.
  
  

Bonus Points (not required):

• Experience working with autonomous vehicle sensor data (e.g., LiDAR, camera, radar).
• Familiarity with simulation environments and data generated from AV simulations.
• Experience with data visualization tools (e.g., Looker) for presenting performance metrics.
• Knowledge of statistical analysis and machine learning techniques relevant to performance evaluation.

Success Metrics:

• Successful design and implementation of key autonomous vehicle performance metrics.
• Improvement in the efficiency and effectiveness of AV performance evaluation processes.
• Timely and accurate delivery of data and insights to AV development teams.
• Contribution to the overall advancement and safety of our autonomous vehicle technology.

This is a unique opportunity to make a meaningful impact at Motional by enhancing our data platform and accelerating development speed for our industry-leading autonomous vehicle metrics and capabilities ecosystem. We take pride in having some of the brightest and most dedicated talent in the world on our team. If you're innovative, driven, and eager to tackle challenges, we'd love to have you join us!

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Travel Requirements (greater than 20%):

Expected to travel for 1-2 weeks each quarter visiting all of our testing sites - mostly to LV, but also domestically as needed for the business.

Working Environment:

The work environment characteristics described here represent those a team member encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and/or airborne particlesThe noise level in the environment is low to moderate.

Motional is a leading autonomous driving company on a mission to make driverless vehicles a safe, reliable, and accessible reality. Backed by Hyundai Motor Group, Motional is at the forefront of the physical AI revolution. Motional isn’t just building first-of-its-kind technology; we are transforming transportation to create safer streets and more sustainable mobility options.

The Systems Readiness and Performance team is the crucial bridge between software development and real-world deployment. We are responsible for driving system design, for verifying and validating the autonomy stack, and for defining, measuring, and validating system performance targets. We work closely with stakeholders in autonomy, infrastructure, and operations to build the definitive safety case for the commercial launch of our fully driverless IONIQ 5 robotaxis in Las Vegas later this year.

Mission Summary:

The Autonomy Subsystems team at Motional is focused on designing and evaluating modules of the autonomy software. We are seeking a talented senior engineer to contribute to evaluation of our machine learning subsystems. Our team performs a variety of evaluations of machine learning models, including offline model eval, evaluation of open and closed-loop re-simulations, and assessment of on-road performance. Our goal is to establish metrics that describe autonomy subsystem performance, evaluate against those metrics to validate performance, and provide meaningful insight to ML developers and teams, working closely alongside them to improve the performance of ML models on the car.

We are looking for a highly-technical systems engineer with experience designing and evaluating safety critical systems and machine learning models. Bring your passion for autonomy, robotics, and machine learning to our team to help build a production-ready system and prepare for our scaled robotaxi service deployment.

Responsibilities:

• Define, prototype, and validate advanced metrics that bring new insights to model performance evaluation for autonomy subsystems (mainly focused on perception, prediction, and planning).
• Assess coverage of existing training and testing, then curate test sets that sufficiently capture Motional’s intended deployment operational design domain, across many axes (agent types, interaction types, map/spatial, etc.).
• Evaluate machine learning model performance against these metrics and tests.
• Assess system-level performance and subsystem contribution to system behavior through large-scale data analysis of on-road and simulation events.
• Define performance requirements for autonomy subsystems, and supporting analyses required to establish these targets.
• Coordinate subsystem-level evaluation with other system-level testing efforts across the systems team in support of the safety case and safety claims.
  
  

Qualifications:

• An engineer who has demonstrated strong cross-functional collaborative skills and is highly self-starting. This is a highly cooperative role across systems, autonomy, infrastructure, and other parts of the organization.
• Proven engineer with 5+ years of experience working on high-tech safety critical systems or robotics, ideally from a systems, robotics, or similar background.
• Master’s degree in relevant fields (systems, robotics, ML, CS, etc.) or Bachelor’s degree plus significant relevant in-field experience.
• Skilled Python developer, familiarity with analyzing the large scale data required to train and test ML models.
• Experience designing unique metrics that capture key aspects of system behavior and are used to enhance model development.
  
  

Bonus Skills:

• Experience training machine learning models, familiarity with state-of-the-art ML model architectures.
• Deep experience with a specific aspect of machine learning for autonomous robotics (perception, prediction, or planning).
• Knowledge of C++, especially applied to safety critical systems.
• Experience with systems verification and validation techniques
• Experience with regression testing updates to already-deployed software in a safety-critical environment.
• Experience with automotive standards (E.g: ISO 12207, ISO 26262, ISO 21448)
• Experience with software quality management and assurance activities (E.g: IATF 16949, ISO 9001)
• Thorough understanding of robotics systems including sensors, actuators, mechatronics and software systems
• Work in cross collaboration teams to address problems and find solutions
  
  

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Travel Requirements (greater than 20%):
Expected to travel for 1-2 weeks each quarter visiting all of our testing sites - mostly to LV, but also domestically as needed for the business.

Working Environment

The work environment characteristics described here represent those a team member encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and/or airborne particlesThe noise level in the environment is low to moderate. 

Motional AD LLC is an Equal Employment Opportunity employer and we welcome all qualified applicants.  All applicants will receive impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, religion, gender identity, sexual orientation or other legally protected status.  Motional AD LLC is a Drug-free workplace.

Mission Summary:

As a Technical Lead Manager at Motional, you'll lead a team responsible for the development and delivery of core trajectory planning algorithms via numerical optimization for autonomous vehicles. In this role, you will be at the forefront of shaping the motion planning and control systems that enable our fleet to navigate complex environments safely, efficiently, and comfortably. As a key leader, you will drive the development and continuous performance improvements of cutting-edge trajectory generation algorithms, collaborate with cross-functional teams (Planning, Perception, Prediction, Localization, ML Products, and Systems Engineering), and mentor a talented group of highly skilled engineers to deliver state-of-the-art solutions. 

If you are passionate about autonomous driving and being part of our commercial launch this year, thrive on solving challenging real-world problems, and eager to make a significant impact in a rapidly evolving field, we want to hear from you!

What you'll do:

• Lead and scale a high-impact trajectory planning team, defining its technical vision, execution strategy, and long-term organizational role within the Motion organization.
• Drive commercial launch readiness for trajectory planning by delivering on-road driving behavior improvements (safety, comfort, and assertiveness) across the fleet through feature expansion, continuous performance improvements, and innovation through state-of-the art methods.
• Apply a rigorous, metrics-driven framework to quantify and improve on-road performance. Champion leveraging existing training and evaluation pipelines to ensure scalable, production-ready delivery.
• Manage the computational efficiency and real-time performance of trajectory generation algorithms, ensuring latency budget compliance.
• Lead the rapid triage and root-cause analysis (RCA) of critical fleet incidents, translating real-world edge cases into immediate algorithmic refinements and validation sets.
• Oversee the successful execution of complex, multi-team initiatives, ensuring technical alignment from design through deployment while maintaining a rigorous standard for testing and validation to meet the high safety bars required for our commercial launch.
• Coordinate with peer leads to provide technical leadership, making consequential decisions on architectural direction, strategic investments, tactical execution, and technical debt reduction.Ensure technical excellence through rigorous design and code reviews while actively facilitating the professional growth and mentorship of your engineering team. Set and drive ambitious goals that challenge the team to deliver industry-leading trajectory planning solutions.
• Define and negotiate quarterly and annual technical roadmaps aligned with company-level autonomy milestones in coordinate with project managers and execute plans on schedule.
  
  

What we're looking for:

• Proven Engineering Leadership: 2+ years of experience managing high-performing development teams, with a demonstrable track record of inspiring, mentoring, and coaching engineers and driving measurable productivity gains.
• Ship-to-Production Mindset: Experience leading the delivery of production-quality algorithms in a high-stakes environment (Autonomous Vehicles, Robotics, or Aerospace). You know what it takes to move from a prototype to a commercially viable product.
• Strategic Vision: Ability to look beyond the immediate deliverables to define and defend a balanced technical roadmap that balances long-term architectural health with the urgent needs of a 2026 commercial launch.
• Technical Domain Expertise: Deep theoretical and practical expertise in numerical optimization and optimal control. You should be highly proficient in areas such as Model Predictive Control, nonlinear programming, and convex optimization applied to real-time trajectory generation.
• Advanced Motion Planning: Significant experience solving motion planning problems under uncertainty, including interaction-aware planning with dynamic agents and complex environmental constraints. Experience with Machine Learning based approaches is a significant plus.
• Full-Stack Robotics Context: Strong intuition for the entire robotics stack. You understand how upstream (Perception, Prediction) and downstream (Control, Actuation) systems impact trajectory feasibility and fleet safety.
• Production-Grade Software Development: Expertise in Modern C++ development within a Linux environment, with a focus on writing high-performance, real-time, and safety-critical code.
• Tooling Proficiency: Fluency in Python for rapid prototyping, data analysis, and visualization. Experience applying AI-augmented development workflows to large-scale Modern C++ codebases (e.g., agentic tools for multi-file refactoring, automated test generation, semantic code navigation, and code review acceleration) is strongly preferred. Experience with SQL or big-data frameworks for fleet-scale performance analysis is a significant plus.
• Influence & Clarity: Exceptional communication skills, with the ability to translate complex mathematical concepts into actionable plans for cross-functional stakeholders and executive leadership.
• Educational Foundation: Master’s or PhD in Robotics, Computer Science, Electrical/Mechanical Engineering, or a related quantitative field.
  
  

We encourage a hybrid schedule with in-office time at one of our locations in Boston, Pittsburgh, or Las Vegas to support collaboration, or this role can be fully remote.

Mission Summary:

The Staff Systems Safety Engineer:

• Oversees the development and implementation of engineering safety processes for our autonomous vehicle systems
• Is responsible for reviewing hazards, risk assessments, and ensuring compliance with industry safety standards (ISO 26262, SOTIF, and ASIL).
• Collaborates with cross-functional teams, including software, hardware, and AI engineers, to ensure integration of safety into the design and validation of our AV system
  
  

Essential Duties:

• Ensure and oversee the development and implementation of  system safety processes for autonomous vehicle platforms.
• Ensure hazard analysis and risk assessments (HARA) for AV components and subsystems are conducted.
• Assist in the definition and verification of functional safety requirements in compliance with ISO 26262 and SOTIF (ISO 21448).
• Collaborate with hardware, software, and AI teams to integrate safety measures into perception, decision-making, and control systems.
• Support the development of failure mode and effects analysis (FMEA) and fault tree analysis (FTA) for AV systems.
• Ensure compliance with regulatory and industry safety standards, including SAE J3016, NHTSA, and UNECE WP.29.
• Ensure the development and execution of safety verification and validation plans, including simulation, testing, and real-world driving scenarios.
• Work with certification bodies and regulators to ensure safety case documentation and approval processes.
• Contribute to the development of safety culture within the organization by providing guidance and training
  
  

Qualifications:

Educational Requirements

• Bachelor’s or Master’s degree in Systems Engineering, Electrical Engineering, Computer Science, Mechanical Engineering, or a related field 

Technical / Specialized Knowledge, Skills, Abilities:

• 5+ years industry and 3+ years of experience in safety engineering for automotive, aerospace, or robotics systems.
• Strong knowledge of functional safety standards (ISO 26262, SOTIF, ASIL).
• Knowledge of systems / software engineering standards (INCOSE, ISO15288, ASPICE CMMI)
• Experience with hazard analysis, risk assessment, and safety case development.
• Proficiency in safety analysis tools (e.g., Medini Analyze, Ansys, Fault Tree+, FMEA software).
• Familiarity with autonomous vehicle architectures, including perception, planning, and control systems.
• Experience working with real-time embedded systems and software safety.
• Strong problem-solving, analytical, and communication skills.
• Experience with machine learning safety challenges in AVs.
• Knowledge of cybersecurity principles related to vehicle safety (ISO/SAE 21434).
• Experience in safety assurance for AI-driven systems.
• Previous work with automotive OEMs, Tier 1 suppliers, or AV startups

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Working Environment:

The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job.  Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. 

While performing the duties of this job, the team member is regularly exposed to the office environment, outside weather conditions, road conditions, and pedestrian traffic.  The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and airborne particles.  The noise level in the environment is low to moderate. When traveling, the team member will be exposed to airports, airplanes, hotels and public transportation environments.

This role is based in our Pittsburgh or Las Vegas office and requires in-office days each week.

Mission Summary:

The Autonomous Vehicle (AV) Test Engineering team at Motional is responsible for validating the safety, functionality, and performance of our self-driving technology through rigorous, system-level testing. As an AV Test Engineer, you will take a lead role in the strategy, planning, and execution of comprehensive test campaigns that span perception, planning, and control systems across virtual, closed-course, and public road environments.

Motional is seeking a highly skilled and motivated Senior/Mid-Level AV Test Engineer to join our AV Test Engineering team. You will play a lead role in validating the safety, functionality, and performance of our self-driving technology through rigorous, system-level testing across virtual, closed-course, and public road environments, with a direct focus on commercial readiness of our robotaxi service.

This role requires a proven technical leader who can guide test development, drive continuous improvements to our infrastructure, and ensure high standards for release readiness and safety assurance as we move towards mass deployment.

What you'll work on:

• Own the planning, design, and execution of comprehensive validation campaigns across Perception, Planning, and Control systems using simulation, SIL, HIL, and on-vehicle environments, specifically targeting scenarios critical for robotaxi service reliability and rider experience.
• Drive test execution and documentation to meet the highest standards, ensuring system compliance with safety-critical standards (ISO26262, ISO21448 (SOTIF)), with an emphasis on Operational Design Domain (ODD) limits and safe fallback behavior.
• Develop, maintain, and enhance robust, scalable test infrastructure and automation frameworks using Python, Shell, and relevant platforms to support high-volume, fleet-wide software rollouts.
• Serve as a technical lead for scenario-based testing (using tools like Applied Intuition) and AV capability campaigns, focusing on testing for end-to-end mission performance and service uptime.
• Service Readiness Validation:
  • Design and execute testing for non-driving features critical to the commercial service, including rider interactions, remote assistance handoffs, fleet operations protocols, and over-the-air (OTA) update verification.
  • Define and track Service Quality Indicators (SQI) and KPIs related to rider experience and operational efficiency during validation.
• Conduct detailed log analysis, support root-cause investigations across AV software and hardware, and utilize CAN-based tools for subsystem verification, particularly diagnosing issues impacting fleet efficiency and customer satisfaction.
• Lead QA review cycles, define release readiness gates for commercial software, represent Test Engineering in cross-functional forums, and mentor junior engineers.

What we're looking for:

• 5+ years in software QA or system testing, specifically within AV, ADAS, robotics, or safety-critical systems.
• Bachelor’s degree or higher in Engineering, Robotics, ECE, Computer Science, or a related technical field.
• Technical Expertise:
• Demonstrated expertise in test strategy, automation, and end-to-end testing for complex mechatronic/autonomous systems.
• Experience planning and executing tests in a simulated environment, both HIL and SIL
• Experience with CI/CD pipelines and integrating quality gates for production-grade software releases.
• Proven ability to lead technical efforts, mentor, operate with minimal oversight, and drive cross-functional alignment with teams like Fleet Operations and Product.

Bonus points:

• Master’s degree in a relevant field.
• Deep familiarity with CAN-based tools (CANalyzer/CANoe) and logging/debugging techniques.
• Working knowledge of industry safety standards (ISO26262, SOTIF).
• Familiarity with AV safety case development or safety validation workflows.
• Experience with robotaxi service features (e.g., in-cabin HMI testing, rider support systems).
• Experience with ROS, cloud telemetry systems, or AV data pipelines.
• Experience in a cross-site or global engineering organization.

Physical Demands

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Working Environment

The work environment characteristics described here represent those a team member encounters while performing the essential functions of this job.  Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the team member is regularly exposed to outside weather conditions, road conditions, and pedestrian traffic.  The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and airborne particles.  The noise level in the environment is low to moderate.

Mission Summary:

The Autonomous Vehicle (AV) Test Engineering team at Motional is responsible for validating the safety, functionality, and performance of our self-driving technology through rigorous, system-level testing. As a Senior AV Test Engineer, you will take a lead role in the strategy, planning, and execution of comprehensive test campaigns that span perception, planning, and control systems across virtual, closed-course, and public road environments.

In this role, you will guide test development efforts across multiple AV subsystems, mentor junior engineers, and drive improvements to our tooling, test infrastructure, and methodologies. You will lead cross-functional initiatives that directly impact release readiness and safety assurance, translating high-level engineering requirements into scalable test plans and measurable quality outcomes. Your work will contribute to iterative development, fault injection analysis, and validation of safety-critical systems that meet the highest standards for reliability and compliance.

Essential Duties:

Technical Leadership & Validation:

• Lead the planning, design, and execution of validation campaigns across simulation, SIL, HIL, and on-vehicle environments, with a focus on perception, planning, and control systems.
• Serve as the technical lead for scenario-based testing, utilizing platforms like Applied Intuition or equivalents for synthetic and re-simulation use cases.
• Lead AV capability campaigns, employing AB Dynamics equipment for system-level validation and performance benchmarking.
• Own the creation and execution of test plans for complex mechatronic and software systems, including drive-by-wire (DBW), braking, steering, and system integrations.

Test Infrastructure & Analysis:

• Develop and maintain robust test infrastructure using Python, Shell, and automation frameworks, ensuring modular, reusable, and scalable test architecture.
• Conduct detailed analysis of logs and system behavior, supporting root-cause investigations across AV software and hardware components.
  
  

Quality Assurance & Compliance:

• Participate in and lead QA review cycles, helping to define entry/exit criteria, regression coverage, and release readiness gates.
• Ensure traceability and compliance by documenting procedures, results, and outcomes using Jira, GitLab, and Confluence.
• Contribute to compliance with safety-critical standards such as ISO26262, ISO21448 (SOTIF), and ISO9001.
  
  

Collaboration & Mentorship:

• Represent the Test Engineering function in cross-functional planning meetings, collaborating closely with perception, planning, controls, and safety teams.
• Mentor and support junior Test Engineers, providing technical guidance and fostering a culture of continuous learning and improvement.
  
  

Strategic Adaptation & Support:

• Continuously adapt and optimize test strategies in response to evolving product requirements, architectural shifts, and real-world findings.
• Support after-hours testing or incident triage as needed by fleet or field operations.
• Travel domestically on occasion to support on-site testing or operational deployments.
• Perform additional duties as assigned.

Required Qualifications:

• Bachelor's degree or higher in Engineering, Robotics, ECE, Computer Science, or a related technical field.
• 5+ years of experience in software QA or system testing, including AV, ADAS, robotics, or safety-critical systems.
• Demonstrated expertise in test strategy, test case development, test execution, and automation for complex mechatronic or autonomous systems.
• Experience leading end-to-end testing across software stacks and physical systems, including SIL, HIL, and real-world deployments.
• Strong analytical skills with proficiency in debugging, log parsing, and root cause analysis.
• Excellent verbal and written communication skills, with the ability to drive cross-functional alignment and effectively report technical findings.
• Proven ability to lead technical efforts, mentor junior engineers, and operate with minimal oversight.
• High level of initiative, ownership, and accountability in a fast-paced, startup-style engineering environment.
• Flexible schedule and willingness to support late meetings, night shifts, or urgent test activities as required.

Preferred:

• Master’s degree in a relevant field.
• Deep familiarity with CAN-based tools (CANalyzer, CANoe) for fault injection, bus analysis, and subsystem verification.
• Working knowledge of industry standards for safety-critical systems such as ISO26262, ISO21448 (SOTIF), and ISO9001.
• Familiarity with AV safety case development or safety validation workflows.
• Experience with robotic middleware (e.g., ROS), cloud telemetry systems, or AV data pipelines.
• Experience in a cross-site or global engineering organization.
  
  

Physical Demands:

While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand and at times for long periods; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee must occasionally lift and move up to 50 pounds.

Working Environment:

The work environment characteristics described here represent those a team member encounters while performing the essential functions of this job.  Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the team member is regularly exposed to outside weather conditions, road conditions, and pedestrian traffic.  The team member is regularly exposed to mechanical and computer parts. The team member is occasionally exposed to fumes and airborne particles.  The noise level in the environment is low to moderate.

Motional AD LLC is an Equal Employment Opportunity employer, and we welcome all qualified applicants.  All applicants will receive impartial consideration regarding race, sex, color, national origin, age, disability, veteran status, genetic data, religion, gender identity, sexual orientation, or another legally protected status.  Motional AD LLC is a Drug-free workplace.

Role Summary

We are looking for an experienced Senior Quality Engineer to support solid state transformer production. In this role, you will be responsible for designing and implementing the Quality Management System to enable high quality products and commercialization. You will partner with design, supply chain and manufacturing to develop Amperesand’s quality processes, you will lead regulatory and customer audits to qualify Amperesand as a preferred supplier.  

The Quality Engineer is a professional problem solver, that can make good use of quality techniques to solve quality challenges and develop reliable processes that prevent creation of defects. The Sr. Quality Engineer will work on high quality products that meet the high reliability standards in the electrical grid equipment business. 

Responsibilities:

• Development of processes to meet the ISO9001 standard. 
• Lead customer, regulatory and compliance audits. 
• Development of manufacturing requirements, quality standards, and product quality plans to ensure products meet the expectations of our target customers. 
• Deployment of manufacturing level requirements to subsystems, assemblies & components to ensure a clear focus on design and customer needs. 
• Identification of critical requirements to ensure proper supplier and production focus on critical needs. 
• Lead development of FMEAs (Design & Process) for development teams to identify and address critical risks. 
• Manage and facilitate the root cause & corrective actions system through tracking and validation of issues and support in root cause analysis through facilitating brainstorming, use of lean methodologies, hypothesis testing, design of experiments, etc. 

Qualifications:

• Bachelor’s or Master's Degree in Electrical, Mechanical, Materials, Industrial Engineering, or equivalent experience. 
• ASQ or Six Sigma certification are preferred. 
• 5+ years of experience in quality, with background in electrical assemblies and/or power electronics.
• Strong interpersonal and communication skills are an absolute requirement to establish effective working relationships within Amperesand and its partners. 
• Specific training and demonstrated success in applying design for quality and problem-solving methodologies, FMEA, process capability analysis, hypothesis testing, DoE, SPC, etc. 
• Strong background and demonstrated success applying statistical methods. 
• Minitab, JMP or other statistical software capabilities are preferred. 
• Data mining and database (e.g. MySQL) experience. 
• Excellent oral, written and presentation skills.  

Please note: This role requires working on-site 5 days a week. We do not offer hybrid or remote options. Travel up to 15% of the time to suppliers and customers in the USA and overseas. 

Overview

As the Industrial Engineer - Warehouse Design & Automation, you will be a technical leader responsible for designing, engineering, and scaling warehouse facilities across a multi-site fulfillment network. Your primary mission is to translate business demand and growth forecasts into data-driven, buildable warehouse designs that optimize throughput, labor efficiency, space utilization, and cost.

This role partners closely with Operations, Real Estate, Facilities, IT, Finance, and external automation vendors to deliver standardized, scalable solutions for greenfield builds, expansions, and retrofits. You will bring a strong systems mindset, deep understanding of material flow, and a bias for simplicity, operability, and long-term sustainability.

What You’ll Do

Warehouse Design & Engineering

• Design end-to-end warehouse layouts for new facilities, expansions, and retrofits, supporting high-throughput fulfillment operations.
• Engineer material flows from inbound receiving through outbound shipping, ensuring efficient, safe, and ergonomic processes.
• Define building-level requirements including dock counts, clear heights, column spacing, power, floor loading, and equipment zoning, in partnership with cross-functional teams.
• Develop and maintain layout drawings, design assumptions, and engineering narratives for leadership, finance, and vendor review.

MHE & Automation Engineering

• Specify, evaluate, and engineer material handling and automation systems including:
• Conveyors, sorters, and divert systems
• Pick modules, pallet flow, case flow, and mezzanines
• AMRs, AGVs, and goods-to-person solutions
• Packaging, labeling, dimensioning, and weighing systems
  
  
• Develop functional specifications, throughput targets, and redundancy strategies for automation systems.
• Partner with integrators and vendors through RFPs, design reviews, FAT/SAT, commissioning, and go-live support.

Capacity Modeling & Data Analysis

• Build capacity, throughput, and labor models using forecasted volumes, SKU profiles, and order characteristics.
• Analyze peak scenarios, seasonality, and failure modes to stress-test designs.
• Quantify trade-offs between labor, automation, space utilization, service levels, and cost.
• Use post-launch operational data to refine assumptions and continuously improve design standards.

Financial Analysis & Business Case Development

• Develop CapEx and OpEx estimates for MHE and automation investments.
• Support ROI, payback period, and total cost of ownership analyses.
• Partner with Finance and Leadership to support capital planning and investment decisions.
• Drive standardization across facilities to reduce engineering variability and lifecycle cost.

Launch Support & Continuous Improvement

• Support warehouse launches and expansions through go-live and stabilization.
• Partner with Operations, Maintenance, and Controls teams to resolve systemic design issues.
• Perform post-launch audits and feed learnings back into network design standards and playbooks.
• Document and maintain reference designs, engineering standards, and best practices.

What You’ll Need

• Bachelor’s degree in Industrial Engineering, Mechanical Engineering, Systems Engineering, or a related field.
• Alternatively, equivalent hands-on experience designing warehouse automation systems may be considered.
• 5+ years of experience in warehouse design, material handling engineering, or automation.
• Proven experience designing high-volume distribution or fulfillment centers.
• Strong analytical and modeling skills, with advanced proficiency in Excel; SQL, Python, or simulation tools are a plus.
• Proficiency in AutoCAD or similar layout and design tools.
  
  

Preferred Qualifications

• Master’s degree in Industrial Engineering, Mechanical Engineering, Systems Engineering, or a related field.
• Experience in large-scale e-commerce, retail, or 3PL fulfillment networks.
• Familiarity with WMS concepts and system integration dependencies.
• Greenfield warehouse launch experience.
• Experience working directly with automation integrators or MHE vendors.
  
  

Key Attributes

• Strong systems thinker with the ability to design for scale, peak, and failure scenarios.
• Data-driven decision maker who can clearly communicate technical trade-offs to non-technical stakeholders.
• Practical, operations-aware engineer who values simplicity, maintainability, and standardization.
• Builder mindset with a desire to create mechanisms, standards, and repeatable solutions.

Role Summary: 

We are seeking a skilled Senior Mechanical Design Engineer to join our team and contribute to the development of power electronics products. The primary function of this position is to design custom machinery and support the entire project cycle from concept development through installation, commissioning, and handover to the operations team. You will work closely with cross-functional teams, including product design, Controls, manufacturing, and test engineers, to ensure efficient performance and reliability in high-power density environments.

Responsibilities:

•  Utilize CAD software CAD software (3D EXPERIENCE (3DX), CATIA, NX, SolidWorks, Creo etc.) to create detailed mechanical designs.

• Model and design complex electro-mechanical parts, including plastics, sheet metal, insulators, magnetic components, and high-voltage connectors.

• Perform mechanical design analysis, including structural FEA, thermal CFD, vibration, and fatigue assessments.

• Solve packaging challenges involving electrical isolation, sealing, thermal dissipation, EMI/EMC shielding, and mechanical shock/vibration.

• Define and execute validation test plans including structural, thermal, and environmental testing.

•  2D drawings with GD&T for production and inspection.

• Create engineering documentation, tolerance stacks, BOMs, and release packages through PLM systems.

• Collaborate cross-functionally with electrical, thermal, Firmware and controls, manufacturing, test, and industrial design teams.

• Work closely with suppliers to optimize DFM, DFA, and tooling strategies for high-volume production.

• Lead prototype development, fabrication, assembly, and mechanical testing of new designs.

• Support root-cause analysis of design issues in pilot or production builds and lead iterative improvements.

• Drive trade studies to inform system-level decisions on design architecture, materials, and manufacturing processes.

• Guide selection for structural, thermal, and electrical compatibility in high-voltage environments.

• Contribute to the layout and design of integrated cooling systems including cold plates, thermal interfaces, and airflow paths.

• Develop assembly procedures and manufacturing instructions to support scalable production.

• Participate in mechanical  FMEA and DVP&R activities across product lifecycle stages.

• Work with quality and reliability teams to meet performance, lifecycle, and safety targets.

Qualifications:

• Bachelor’s or Master’s degree in Mechanical Engineering or a related field.

• 3+ years of experience in mechanical design for power electronics, automotive, industrial, or energy products.

• Expertise in CAD modeling using 3D EXPERIENCE (CATIA V6/V5), SolidWorks, NX, or Creo.

• Deep understanding of mechanical fundamentals—statics, dynamics, heat transfer, and materials.

• Proficiency in GD&T, tolerance analysis, and DFM/DFA principles.

• Experience designing enclosures for IP-rated or outdoor-rated power equipment.

• Experience with high-volume manufacturing processes such as injection molding, die casting, extrusion, and sheet metal forming.

• Working knowledge of materials: metals (aluminum, steel), plastics, ceramics, gaskets, potting compounds.

• Hands-on experience taking designs from prototype through production deployment.

• Familiarity with PLM systems (3D EXPERIENCE, Windchill, etc.) and engineering change workflows.

• Comfortable with root-cause analysis, failure mode resolution, and mechanical reliability testing.

• Strong communication skills and ability to lead cross-functional design reviews and technical deep-dives.

• Prior experience collaborating with suppliers on tooling development, DFM feedback, and tolerance negotiations.

• Familiarity with PCBAs, connectors, and mechanical integration of high-density electronic assemblies.

• Experience with design and test documentation for regulatory standards (UL, IEC, NEC preferred).

• Passion for product innovation, sustainability, and enabling electrification through engineering excellence.

• Willingness and ability to travel up to 15% - 20% including internationally

Bonus Qualifications:

• Strong background in structural, thermal, and vibration analysis using tools like Ansys Mechanical, Fluent, and Maxwell.

• Familiarity with electronics packaging and PCB interface considerations.

• Experience with medium- to high-voltage systems and insulation coordination (creepage, clearance, potting, sealing).

• Experience working in Agile development environments, including task management and sprint planning using Scrum methodologies and tools like Jira. 

Please note: This role requires working on-site 5 days a week. We do not offer hybrid or remote options. 

 Responsibilities:

• Lead Design for Manufacturing (DFM) and Design for X (DFx) , Assembly, Quality, Reliability

• Define and implement robust manufacturing processes, including process sequencing, critical parameter development, and assembly recipes

• Drive quality, repeatability, and throughput in both prototype and production environments.

• Collaborate closely with Design Engineering, NPI, Quality, and Production teams throughout the product lifecycle

• Act as a technical lead to resolve quality and functional issues in production and with contract manufacturers.

• Develop data-driven action plans and root cause analyses to ensure timely resolution and continuous improvement.

• Lead the design and validation of novel prototype tooling and assembly equipment with 3rd third-party equipment builder.

• Collaborate with the equipment design engineer for in-house equipment development.

• Oversee internal and external development of equipment and processes for new product introduction and scale-up.

• Support the ramp-up of production lines, resolving technical issues, optimizing process performance, and ensuring lines meet takt time, yield, and labor efficiency targets.

• Perform line balancing and capacity planning studies to support efficient line layout, equipment utilization, and throughput targets as production scales.

• Maintain comprehensive process documentation, participate in Engineering Change Management

• Drive continuous improvement efforts through data collection, analysis, and feedback loops

• Mentor junior engineers and technicians, manage engineering teams as needed

Qualifications:

• Bachelor’s or master’s degree in mechanical, Manufacturing, or Industrial Engineering (or related field)

• 6+ years of experience in manufacturing engineering, with a strong background in DFM, process development, and high-mix or high-volume production

• Hands-on experience with a variety of manufacturing processes (e.g., injection molding, die casting, machining, assembly automation, potting)

• Experience leading large-scale capital equipment design projects.

• Strong background in concept-to-production equipment development.

• Experience in data collection and analysis for process development or applicable process engineering expertise

• Ability to lead cross-functional projects and vendor engagements

• Strong problem-solving skills and a data-driven mindset

• Familiarity with tools such as PFMEA, DOE, root cause analysis, and SPC

• Excellent written and verbal communication skills

• Experience working in Agile development environments, including task management and sprint planning using Scrum methodologies and tools like Jira.

• Ability to travel up to 20% - 25% including internationally

Bonus Qualifications:

• Proficiency in CAD software (3D EXPERIENCE (3DX), CATIA, NX, SolidWorks, Creo etc.) for designing mechanical assemblies.

• Experience with DFM/DFA (Design for Manufacturing/Assembly) methodologies.

• Solid understanding of GD&T and its impact on manufacturability.

• Knowledge of motion control, pneumatics, hydraulics, and sensors.

• Power Electronics Assembly experience is highly valued from energy, automotive, aerospace, semiconductor, or consumer electronics manufacturing.

• Experience in Industrial Engineering Optimization and Warehouse design

Please note: This role requires working on-site 5 days a week. We do not offer hybrid or remote options.