We are seeking a motivated and mechanically inclined Waste / Ultra-Pure Water (UPW) Operations & Maintenance Technician Intern to support the operation and maintenance of critical water and wastewater systems within a semiconductor or mission-critical facility.

This role provides hands-on experience with advanced UPW generation, distribution, and wastewater treatment systems, while working alongside experienced technicians and engineers in a highly regulated, safety-focused environment.

Responsibilities:

• Support daily operations of UPW generation and distribution systems, including reverse osmosis (RO), electrodeionization (EDI), ion exchange, degasification, UV oxidation, and sub-micron filtration systems under supervision.
• Assist in operating and monitoring wastewater treatment systems, including neutralization systems, pH adjustment, chemical dosing, lift stations, equalization tanks, and biological processes (e.g., MBR/BNR where applicable).
• Perform routine rounds and system readings; record key parameters such as conductivity, resistivity, TOC, pH, flow rates, pressures, and tank levels, and escalate abnormal conditions.
• Assist with preventive and corrective maintenance on mechanical equipment including pumps, valves, filters, membranes, mixers, blowers, and chemical delivery systems.
• Support water quality monitoring and sampling activities to ensure compliance with process requirements and environmental discharge permits.
• Assist with chemical handling and dosing operations (acids, caustics, and treatment chemicals) in accordance with site safety procedures and SDS requirements.
• Support system flushing, regeneration, and sanitization of UPW systems, including resin beds, RO skids, and distribution loops.
• Assist in troubleshooting system issues such as membrane fouling, scaling, flow restrictions, pump failures, and instrumentation inaccuracies.
• Learn and apply safety procedures including lockout/tagout (LOTO), hazardous chemical handling, and confined space entry.
• Support startup and shutdown activities for UPW and wastewater systems, ensuring controlled and compliant operation.
• Assist in maintaining accurate CMMS documentation (e.g., Maximo), including work orders, calibration records, and maintenance logs.
• Observe and support vendor activities such as membrane cleaning, media replacement, and system performance testing.
• Participate in Environmental Health & Safety (EHS) programs, audits, and continuous improvement initiatives focused on safety, compliance, and water conservation.
• Develop an understanding of semiconductor water quality standards, contamination risks, and the critical nature of UPW systems for manufacturing operations.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Exposure to semiconductor, data center, pharmaceutical, or other mission-critical environments
• Basic knowledge of water/wastewater treatment processes (not required)
• Familiarity with CMMS systems (e.g., Maximo) is a plus
• Enrollment in or recent completion of a technical program (mechanical, environmental, or related field)
• Mechanically inclined with a strong interest in hands-on technical work
• Basic understanding of mechanical systems (pumps, piping, valves, etc.)
• Willingness to learn and work in a fast-paced, mission-critical environment
• Strong attention to detail and commitment to safety

Education / Licenses / Certifications

• High school diploma or equivalent
• Proof of education, licenses, and certifications will be required where applicable.

#LI-DNP

Job Summary:

As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Responsibilities:

· Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications.

· Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements.

· Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems.

· Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients.

· Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations.

· Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner.

· Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence.

Qualifications:

· 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable.

· Degree in Electrical Engineering, Quality Control, or a related field (Preferred).

· Strong knowledge of electrical codes, industry standards, and regulations.

· Exceptional attention to detail and strong analytical skills.

· Effective communication and documentation skills.

· Proficiency in the use of testing equipment and tools.

· Ability to work independently and as part of a collaborative team.

· Commitment to safety, quality, and continuous improvement.

· OSHA10 or higher and other safety certifications are highly preferred.

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

· Indoor office setting with controlled temperature.

· Outdoor industrial sites with exposure to weather extremes.

· Potential exposure to noise, dust, chemicals, or other environmental factors.

· Travel requirements: up to 10% of time.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

· Medical, dental, and vision insurance

· 401(k) retirement plan with company match

· Paid time off (PTO) and holiday pay

· Life and disability insurance

· Professional development and training opportunities

· Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

LEAD with Values:

· Live with Integrity – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.

· Exceed Expectations – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.

· Act with Urgency – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.

· Deliver Excellence – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values, grounded in grit and a commitment to excellence, Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

---

Loenbro is an Equal Opportunity Employer.

Cottonwood Residential is hiring! We are looking for a Maintenance Technician to join our team at Pavilions Apartments in Albuquerque, NM. Apply today!

Compensation & Benefits of a Maintenance Technician

• Competitive pay!
• Full health, vision, dental, life, and disability benefits - available within 1-30 days!
• Generous 401k and HSA Company match!
• Paid time off – eligible for 3 weeks (120 hours) in 1^st year!
• 10.5 paid holidays!

Qualifications & Required Experience of a Property Maintenance Technician

• Ability to read, write, and speak English to communicate with customers, process Company paperwork, and interpret safety and operating manuals and procedures.
• Must be able to move, carry, reposition, or lift items weighing up to 50 lbs.
• Ability to walk and stand for long periods of time.
• Ability to climb stairs, ladders, scaffolds, and ability to navigate elevation changes while maintaining balance.
• Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to navigate difficult terrain and access small areas.
• Ability to work standard community hours, including evenings and weekends. 
• Ability to work as an on-call technician and provide after-hours emergency service with the support of the Service Manager while following Company standards. 
• Perform repairs that may include, but are not limited to, plumbing, electrical work, and general carpentry work related to household, building, and property grounds repairs. 
• EPA certification Type II or Universal is a plus.
• CPO certification is a plus.
• Valid Driver's License is required.

We are seeking a detail-oriented Mechanical Commissioning Technician to support the commissioning, startup, and validation of mechanical systems in a mission-critical environment. This role is responsible for ensuring systems are installed, tested, and operating in accordance with design specifications and operational requirements.

Responsibilities:

• Execute a structured commissioning process for mechanical systems, including system verification, testing, calibration (as applicable), and validation.
• Perform detailed mechanical system walkdowns to identify deficiencies, incomplete work, or deviations from design; document findings and track resolution.
• Conduct mechanical inspections and functional testing to confirm system readiness and support startup activities.
• Coordinate with engineering, construction, and operations teams to resolve commissioning issues and ensure system performance meets design intent.
• Support system turnover and handover to operations by ensuring all commissioning requirements are completed and documented.
• Maintain accurate commissioning documentation, including reports, checklists, punch lists, and as-built records.
• Follow and enforce strict safety protocols, identifying and mitigating risks related to rotating equipment, pressurized systems, and hazardous processes.
• Perform additional duties as assigned to support project and commissioning objectives.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Minimum 2+ years of experience commissioning mechanical systems in a mission-critical environment (e.g., data centers, semiconductor facilities, or similar).
• Strong understanding of mechanical systems such as HVAC, piping, pumps, and rotating equipment.
• Experience with commissioning processes, documentation, and system startup procedures.
• Ability to read and interpret engineering drawings, P&IDs, and specifications.
• Strong problem-solving skills and attention to detail.
• Effective communication and coordination skills across cross-functional teams. 

Education / Licenses / Certifications:

• Associate’s or Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field.
• Proof of education, licenses, and certifications will be required where applicable

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  
  

#INDHP

VSC Fire & Security in Albuquerque, New Mexico is seeking candidates for the position of Integrated Systems Service Technician.

Position Summary:

Integrated Systems Service Technician provides safe and efficient service on multiple integrated systems. Resolves technical issues and gives potential resolution to unresolved issues. Has a good technical knowledge and ability to communicate effectively to understand problems and offer solutions. Technician is customer-oriented and patient to deal with difficult customers. Integrated Systems may include any of the following: Fire Alarm; Intrusion Detection; Access Control; CCTV; IP Cameras; Networking Infrastructure; Telecom; BDA (Bi-Directional Antenna systems); DAS (Distributed Antenna Systems); Audio/Video; Nurse Call; Area of Refuge; Intercom; Crestron; Extron; Honeywell; Notifier; Gamewell FCI; Silent Knight; Fire Lite; Siemens; AutoCall/JCI; or RATH.

 What we offer:

• Excellent pay $35.00 - $45.00 and up based on experience
• Overtime eligible
• Company vehicle and fuel card for applicable positions
• Company cell phone and/or tablet for applicable positions
• Company Laptop for programming FACP's and Security Head-in's.
• Paid vacation and company holidays
• Medical, dental and vision insurance options for you and your family
• Health Savings Account (HSA) or Flexible Spending Account (FSA)
• Company paid life insurance for full time employees
• Employee apparel program
• Company paid long term disability insurance
• Bonus for referring new employees
• Parental leave for full-time employees
• Employee Assistance Program (EAP)
• Boot Allowance
• NICET certification test reimbursement
• Opportunities for training and advancement
• All needed Personal Protective Equipment (PPE) provided

 What you need:

• Two to three years of experience in servicing at least one or more of the following systems: fire alarm, security systems, camera systems, access control, or similar systems.
• Proficient in following written and verbal instructions, with exceptional attention to detail and communication skills.
• Ability to maintain productivity in the field, set goals, and meet service schedule.
• Competent in reading plans, documents, meters, and to discern colors for safety signage.
• Ability to follow written and verbal instructions.
• Exceptional attention to detail and communication skills.
• Eagerness for professional development and growth.
• Ability to pass various background checks.
• Reliable transportation, valid State Driver's License with acceptable driving record for use of company vehicle.
• Desirable (but not required):
  
  • NICET lI or III in FAS along with I or II in ITFAS, Avigilon Cert, other manufacturers certifications.

 What you will do:

• Installs, tests, and repairs security, camera, access control, suppression, and fire alarm systems.
• Troubleshoot system malfunctions and false alarms.
• Program multiple types of systems and test for proper operation.
• Consults with client on system issues; provides recommendations for repair.
• Uses blueprints or building plans to determine proper systems to install/service based on building layout and setting.
• Runs wiring and circuits, installs hardware, and attaches electrical wires.
• Inspects and tests systems, batteries, and electrical wiring; make adjustments, and repairs as required.
• Replaces malfunctioning hardware when necessary.
• Ensures systems comply with NEC and NFPA fire codes.
• Explains and demonstrates system function and operation to end users.
• Performs other related duties as required.
• Be on call as required.
• Serve as the first point of contact for customers seeking technical assistance over the phone or email.
• Perform remote troubleshooting through diagnostic techniques and pertinent questions.
• Provide support for form development and maintenance of inspection forms.
• Tech savvy with working knowledge of office automation products, databases, and remote control.
• Follow design plans for installation jobs and communicate any design, perform service and deficiency jobs, and communicate and document any changes.

Company Overview

Kairos Power, is a new nuclear energy technology and engineering company whose mission is to enable the world’s transition to clean energy, with the ultimate goal to dramatically improve people’s quality of life while protecting the environment. This goal will be accomplished through the commercialization of the fluoride-salt-cooled, high-temperature reactor (FHR) that can be deployed with robust safety, affordable costs, and flexible operation to accommodate the expansion of variable renewables.

Job Summary 

Kairos Power is seeking a Facilities Mechanical Technician with broad building and mechanical expertise supporting industrial, commercial and/or R&D facilities. This position will be located at the Kairos Power Southwest facility in Albuquerque, New Mexico and will report to the Facilities Department. The Facilities Maintenance Technician will support a variety of facilities maintenance tasks across the site including performing inspections, installations, repairs, replacements, and other general tasks on existing facility infrastructure. The role will also conduct testing, operations, troubleshooting, and mechanical work in support of the engineering teams onsite.  

The ideal candidate will have hands-on experience performing/coordinating maintenance on boilers, chillers, and HVAC systems and experience working with R&D test equipment, manufacturing equipment, and other commercial building systems including Building Management Systems (BMS), fire protection, fire alarms, access control, security cameras, and security alarms. 

Responsibilities

• Provide technical support for required mechanical tasks in collaboration with internal facilities, construction, engineering and project teams
• Complete preventative and corrective maintenance/troubleshooting on site Boilers, Chillers, HVAC, and other mechanical systems (plumbing, compressed air, etc.)
• Support the scope and coordination with facilities contractors to complete required projects/work on site
• Maintain a detailed understanding and knowledge of the building’s mechanical, electrical, and plumbing systems
• Support the construction and operations of Boilers, Chillers, HVAC and other building systems equipment in support of R&D testing at the facility
• Development of operating standards and Standard Operating Procedures (SOPs) for mechanical equipment (Boilers, Chillers, Reverse Osmosis (RO), HVAC, etc.)
• Perform lockout/tagout to isolate components and de-energize equipment.
• Ability to test, troubleshoot, and repair malfunctioning systems, apparatus, or components by using basic electrical test equipment (voltmeters, ohmmeters)
• Carry out skilled maintenance tasks encompassing inspections, operations, installation, and troubleshooting of building equipment such as bridge cranes and dock equipment
• Manage small facilities projects, work orders, and preventive maintenance tasks using computerized management maintenance systems (CMMS) and app-based systems
• Document and communicate results of preventive maintenance tasks including visual inspections, defect detection, hazard identification, and code compliance
• Analyze, prepare, and deliver reports; fill out preventative maintenance requests, deficiency reports, and work orders using a computer and other equipment.
• Provide effective and timely customer service to internal clients and team members.
• Comply with national, local, and company safety codes, procedures, policies and practices.
• Participate in emergency response activities related to mechanical system failures or facility outages, including on-call or after-hours support as required.
• Support regulatory inspections, audits, and corrective action implementation related to mechanical systems and facilities compliance.
• Assist with lifecycle planning, equipment replacement evaluations, and maintenance optimization initiatives.
• Other duties as assigned.

Qualifications

• High school diploma, GED, or equivalent and completion of related accredited program or equivalent work experience in industrial or commercial maintenance, with emphasis on mechanical and general building work
• 3+ years of experience working with HVAC, plumbing, boilers, chillers, or related systems in industrial, commercial and/or R&D facilities
• Certifications/Licenses for completing work on Boilers, Chillers, or refrigerant systems in the state of New Mexico.
• Experience testing, commissioning, troubleshooting, and repairing mechanical equipment.
• Experience in reading plumbing and mechanical diagrams, drawings, schematics, & specifications.
• Experience with Building Management System (BMS), Building Automation System (BAS), Energy Management System (EMS), and/or HVAC remote operation systems troubleshooting.
• Must have experience establishing a safe workplace utilizing NFPA 70E as a safety standard (LOTO etc.); intermediate knowledge of OSHA and EPA regulations, and adherence to applicable Environment, Health, and Safety (EHS) laws and regulations is also required

Knowledge, Skills & Abilities

• Ability to maintain, inspect, operate, install, repair, replace, test, and troubleshoot mechanical, plumbing, and other mechanical system components.
• Ability to oversee mechanical commissioning, testing, and maintenance activities performed by consultants or mechanical contractors.
• Customer service and interpersonal skills necessary to interact effectively in writing and verbally with technical, administrative, and management personnel.
• Ability to work effectively independently and as a team member.
• Strong computer-based skills including ability to utilize software to create and update work orders, send and receive e-mails and internal messages, participate in computer-based training, web-based meetings, and utilize internal company applications.
• Ability to operate motor vehicles and be insured on company vehicles
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues
• Knowledge of applicable building codes, mechanical codes, and industry standards relevant to facility mechanical systems.
• Ability to prioritize and manage multiple maintenance tasks in a dynamic operational environment.
• Ability to recognize abnormal equipment conditions and escalate issues appropriately to minimize downtime and safety risk.

Physical Conditions 

• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment or machinery
• Use hand tools
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• General office environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind 
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Elevated heights
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• Exposure to moving mechanical parts and energized or pressurized systems during inspection, maintenance, and testing activities.
• Variable lighting conditions in areas such as mechanical rooms, rooftops, or equipment enclosures.

Safety and PPE 

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Color identification: detecting, distinguishing, recognizing and identifying colors
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.
• Compliance with lockout/tagout, confined space, fall protection, and hazard communication procedures when performing assigned work.

Travel 

• Some travel may be required, up to 5% 

Certification

• Holds certifications or licensure for operations and maintenance of boilers in the state of New Mexico
• Preferred but not required to be certified to handle refrigerant in the state of New Mexico
• Capable of obtaining forklift and boom lift certification
• Completion of OSHA 30 Construction Safety Training preferred
• First Aid/CPR/AED Training is a plus 

Additional Requirements

• Occasionally requires overtime 
• Seldom requires working weekends 
• Occasionally requires schedule flexibility
• Occasionally requires extended hours to support critical project timelines

#LI-Onsite

Job Summary 

Kairos Power is seeking a highly motivated Operator to support our plant operations and testing team. In this role, you will contribute to the development and deployment of the company’s engineering testing capabilities including assembly, maintenance and operation of large-scale hardware and equipment. This role will require the individual to start and work on-site in Albuquerque, NM for approximately 2 years in preparation for our operation in Oak Ridge, TN. Long-term, this individual may have the opportunity to transition and support operations on-site at our facility in Oak Ridge, TN. The ideal candidate takes pride in his/her hands-on work, organizational skills, has experience in 24/7 plant or large-scale testing operations, and will ultimately contribute to the training and transfer of knowledge/key learnings between operators at each location.

Responsibilities 

• Assembles and installs process and auxiliary equipment into assigned facilities. Frequently uses heavy equipment such as forklifts, telehandlers, and overhead hoists to support installation. 
• Commissions, operates, and maintains mechanical and electrical equipment.
• Prepares, reviews and executes system and component level commissioning, operating and maintenance procedures.
• Performs acceptance testing following new equipment installation including hydrostatic, pneumatic, I/O checks, and electrical component calibrations checks.
• Supports day-to-day operations of the assigned facility including startup, monitor, and shutdown processes and auxiliary equipment.
• Performs chemistry sampling and analysis using standardized analytical instruments and procedures.
• Monitors equipment performance by interpreting and trending process parameters. Takes corrective action to place malfunctioning equipment in a safe state.
• Performs minor preventative and corrective maintenance on mechanical and electrical equipment to include filter replacements, equipment cleaning, and consumable replacements.
• Performs equipment troubleshooting as necessary.
• Perform Lockout-Tagout of mechanical and electrical equipment.
• Reviews and executes hazardous operations per standardized operating procedures.
• Assists engineering staff to execute the R&D test program.
• Other duties as assigned

Qualifications 

• Associate or Bachelors degree in an Engineering Technology program or equivalent or 2+ years of experience as a plant operator or technician (mechanical, electrical, instrumentation, chemicals, power plant, military, or similar backgrounds are highly desired)
• Ability to start and work on-site at the Albuquerque, NM site for approximately 2 years to develop in-depth understanding of company’s large-scale hardware, equipment, and processes
• Ability and willingness to transition between Kairos Power sites in support of operations work and process development, including opportunity to potentially transition to support on-site operations at our future facility in Oakridge, TN
• Ability to understand and follow technical procedures
• Ability and interest in being cross trained and learning different processes to perform other jobs as needed
• Ability and willingness to work with hazardous materials in PPE including full-face respirator and Tyvek suit
• Familiarity with basic hand tools
• Mechanically inclined with an ability to operate plant equipment, hands-on experience with plant equipment and operations desired
• Experience with Instrumentation and Controls systems
• Computer skills including spreadsheet use
• Ability to communicate with others effectively
• Ability to read P&ID and mechanical/electrical drawings
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Always works in a safe and compliant manner
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges, and issues

Physical Conditions 

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like
• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment and machinery
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• Shop floor environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Evaluated heights
• Accessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced

Safety and PPE

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Wearing proper PPE, to include full-face respirator, face shields, gloves, safety shoes, and non-permeable suit
• Handling of Beryllium (Be)

Travel 

• Some travel may be required, 5% or less

Certification  

• Capable of obtaining forklift and boom lift certification 

Additional Requirements   

• Requires occasional overtime
• Requires occasional working weekends
• Requires occasional schedule flexibility
• Requires occasional working 2nd shift, beginning at 7:00pm local time
• Requires occasional extended hours to support launch and critical project timelines 

#LI-Onsite