Who we are

The role

The day-to-day

• Design and develop electronic circuits and PCBs — from requirements capture through schematic design to layout — covering power electronics, digital electronics, and mixed-signal architectures
  
  
• Collaborate proactively with mechanical, software, and systems engineers to ensure seamless integration of electronic assemblies into the airframe and overall system architecture
  
  
• Drive requirements-to-design traceability, actively supporting requirements flow-down and contributing to aircraft-level (A/C) requirements and flight support documentation
  
  
• Design and integrate cable harnesses and connectors, including selection, routing, and integration into complex electromechanical assemblies
  
  
• Develop and execute unit-level tests and support system-level integration and flight testing, troubleshooting issues pragmatically across hardware/software boundaries
  
  
• Produce complete design documentation including schematics, PCB layouts, BOMs, and integration drawings using tools such as Altium Designer or KiCad
  
  
• Perform circuit simulation and analysis using tools such as LTSpice to validate design decisions early in the development cycle
  
  
• Contribute to reliability and safety analyses, including FMEA and reliability prediction, to ensure designs meet required standards
  
  
• Design and integrate communication interfaces, including protocols such as CAN Bus, Ethernet, RS422/485 and similar interfaces, ensuring robust and reliable data and power distribution across the platform
  
  
• Work with RF and radio systems, including datalinks, GNSS, SATCOM, and other radio-frequency technologies relevant to UAV platforms, ensuring reliable connectivity and positioning across all operating conditions
  
  
• Support production and test teams throughout the manufacturing, bring-up, and verification phases, providing hands-on engineering support on the shop floor when needed
  
  
• Stay curious and keep learning — our domain evolves rapidly, and we value engineers who actively seek out new technologies, methods, and best practices

You should apply if you

• Have professional working experience in electronic circuit design, PCB design and layout, covering power electronics, digital electronics, and mixed-signal systems — ideally within aerospace, UAV, or similarly demanding domains
• Are proficient in PCB design tools such as Altium Designer or KiCad, and comfortable using circuit simulation tools such as LTSpice for design validation and analysis
  
  
• Have an understanding of RF and radio systems used in UAV or aerospace applications — including datalinks, GNSS, SATCOM, and related antenna and signal integrity considerations
  
  
• Have hands-on experience with onboard communication protocols such as CAN Bus, Ethernet, and similar digital interfaces, and understand their integration within complex embedded electronic architectures
  
  
• Have proven experience with cable harness and connector design, including selection, routing, and integration of harnesses into complex electromechanical assemblies
  
  
• Possess solid ECAD/MCAD co-design experience, and are comfortable collaborating with mechanical engineers to ensure proper form, fit, and function of electronic assemblies within their physical enclosures and airframe interfaces
  
  
• Can perform requirements flow-down and traceability, translating system-level requirements into electronic design specifications and supporting aircraft-level (A/C) documentation and flight support activities
  
  
• Are familiar with reliability and safety engineering practices, including FMEA and reliability prediction methods, and understand their importance in safety-critical systems
  
  
• Have experience defining and executing unit and system-level tests, and are comfortable working hands-on during integration, verification, and troubleshooting campaigns
  
  
• Can apply ASME/ISO drawing standards and relevant aerospace design and documentation standards
  
  
• Are comfortable working cross-functionally with mechanical, software, and systems engineers in a fast-paced, iterative development environment
  
  
• Are able to support production and test teams during manufacturing bring-up and verification phases
  
  
• Communicate excellently in English, both written and verbal
  
  
• Are pragmatic, curious, and eager to learn — you adapt quickly, take ownership, and thrive in a highly flexible and mission-driven environment

Note: We operate in an industry where women, as well as other minority groups, are systematically under-represented. We encourage you to apply even if you don’t meet all the listed qualifications; ability and impact cannot be summarised in a few bullet points.

Join Helsing and work with world-leading experts in their fields 

• Helsing’s work is important. You’ll be directly contributing to the protection of democratic countries while balancing both ethical and geopolitical concerns

• The work is unique. We operate in a domain that has highly unusual technical requirements and constraints, and where robustness, safety, and ethical considerations are vital. You will face unique Engineering and AI challenges that make a meaningful impact in the world

• Our work frequently takes us right up to the state of the art in technical innovation, be it reinforcement learning, distributed systems, generative AI, or deployment infrastructure. The defence industry is entering the most exciting phase of the technological development curve. Advances in our field of world are not incremental: Helsing is part of, and often leading, historic leaps forward

• In our domain, success is a matter of order-of-magnitude improvements and novel capabilities. This means we take bets, aim high, and focus on big opportunities. Despite being a relatively young company, Helsing has already been selected for multiple significant government contracts

• We actively encourage healthy, proactive, and diverse debate internally about what we do and how we choose to do it. Teams and individual engineers are trusted (and encouraged) to practise responsible autonomy and critical thinking, and to focus on outcomes, not conformity. At Helsing you will have a say in how we (and you!) work, the opportunity to engage on what does and doesn’t work, and to take ownership of aspects of our culture that you care deeply about

What we offer

• A focus on outcomes, not time-tracking

• Competitive compensation and VSOP options

• Relocation support

• Social and education allowances

• Regular company events and all-hands to bring together employees as one team across Europe

Helsing is an equal opportunities employer. We are committed to equal employment opportunity regardless of race, religion, sexual orientation, age, marital status, disability or gender identity. Please do not submit personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, trade union membership, data concerning your health, or data concerning your sexual orientation.

The impact you will make

In this multifaceted and exciting role, you will act as a key interface between the Engineering and Experimental Physics teams, translating complex requirements into robust electrical solutions. You will work alongside a multidisciplinary team of engineers to design, implement and validate high-quality experimental setups involving advanced electromechanical systems. Your work will have a direct impact on the success of experimental campaigns, ensuring safe, reliable and well-structured electrical systems in a high-performance, high-voltage environment. By applying engineering best practices and standards, you will enable cutting-edge research while maintaining the highest levels of safety and technical excellence.

Your responsibilities

• Design, build and wire electrical control cabinets for low voltage and high voltage applications, ensuring full compliance with German and European standards such as DIN VDE 0100, DIN EN 61439, DIN EN 60204-1 and DGUV Vorschrift 3
• Take ownership of electrical design using EPLAN, including creation of schematics, terminal diagrams, cable lists and complete documentation packages
• Perform electrical risk assessments for systems and cabinets, identifying hazards and defining mitigation measures according to applicable safety standards
• Assemble, install and integrate control cabinets and electromechanical systems, ensuring high quality workmanship and safe operation
• Collaborate with scientists and engineers to translate system requirements into robust electrical designs and implemented solutions
• Participate in design reviews, providing expertise on cabinet layout, protection concepts, grounding, EMC and industrial best practices
• Support commissioning, testing and troubleshooting of electrical systems both in-house and on-site during experimental campaigns
• Develop and maintain complete and structured engineering documentation, including schematics, BOMs, test procedures and compliance records
• Define and apply best practices for safe assembly, testing and operation of electrical systems, especially in high voltage environments
• Manage workshop activities related to electrical assembly, ensuring availability of tools, components and an efficient and compliant workspace

What you bring

• Completed vocational training as Electrical Technician, Mechatronics Technician, or a degree in Electrical Engineering
• Minimum 3 years of strong hands-on experience in building, wiring and commissioning electrical control cabinets for low voltage and high voltage applications
• Proven expertise in electrical design using EPLAN, including creation of schematics, terminal diagrams, cable routing and full documentation packages
• Solid experience performing electrical risk assessments, identifying hazards and implementing mitigation measures for electrical systems
• In-depth knowledge of German and European standards such as DIN VDE 0100, DIN EN 61439, DIN EN 60204-1, DIN EN 50178 and DGUV Vorschrift 3
• Strong understanding of power distribution, protection concepts, grounding, EMC and safe design practices in industrial environments
• Ability to read, interpret and create electrical schematics, wiring diagrams and technical documentation
• Practical experience with industrial components such as PLCs, relays, contactors, circuit breakers, safety devices and field instrumentation
• Experience in testing, commissioning and troubleshooting electrical cabinets and integrated electromechanical systems
• Skilled in professional wiring techniques including crimping, shielding, cable routing and use of electrical tools
• Structured and detail-oriented working style with strong ownership and problem-solving mindset
• Good communication skills and ability to collaborate with multidisciplinary and international teams
• Willingness to travel and support on-site activities and experimental campaigns
• Professional proficiency in English is required

What sets you apart

• German language skills are a plus
• Knowledge of PCB design and electrical circuit design according to IEC 61191-1 and DIN EN 60204-1
• Understanding of mechanical design and fabrication methods such as machining, 3D printing and laser cutting

What we offer

Our mission is motivation enough for many. But we also support our team with benefits that foster wellbeing and growth: 

• Public transport reimbursement 
• EGYM Wellpass fitness club access 
• Complimentary health insurance 
• Professional development support 
• Company pension plan
• Healthy office snacks 

For more information on how we process your application data, please review our privacy notice.

The impact you will make

As a Scientific Electronics Engineer, you will play a key role in bridging hardware and software for experimental setups. You will design, develop and integrate low-voltage electronics, microcontrollers and FPGA systems into complex experiments, while creating GUIs and software tools to control and monitor them. Working with Tango Controls, Taranta or similar frameworks, you will ensure seamless communication between devices and software.

Your responsibilities

• Collaborate closely with Scientists and Engineers to design, develop and implement experimental equipment and setups
• Program and develop user interfaces (GUIs) using PyQt or similar frameworks to control experimental devices and systems
• Integrate microcontrollers, FPGA boards and low-voltage electronics into software systems for experimental setups
• Work with Tango Controls, Taranta or similar control frameworks to interface hardware with software
• Monitor, analyze and process TTL signals for triggering cameras and other devices, including noise reduction and signal integrity verification
• Work with sensors, instrumentation and data acquisition systems to ensure reliable and accurate signal transmission and timing
• Assemble, install and commission electronics and software systems for data acquisition and control onsite
• Write clear and detailed documentation including software specifications, deployment instructions, troubleshooting guides and signal processing reports
• Contribute to the Engineering Quality Management System by creating procedural documentation and establishing engineering best practices
• Provide hands-on support to the science team during setup phases and experimental campaigns

What you bring

• Bachelor’s or Master’s degree in Engineering or a related field (e.g., Electronics, Mechatronics, Control Systems)
• Practical experience with low-voltage electronics, microcontrollers, FPGA and embedded systems.
• Knowledge of PCB design tools such as KiCad, Eagle or Altium Designer, including schematic capture, PCB layout and design for manufacturing considerations
• Strong software skills in Python (including OOP) and experience developing GUIs with PyQt or similar tools
• Experience with Tango Controls, Taranta or similar scientific control frameworks
• Familiarity with electrical documentation tools such as EPLAN, SolidWorks Electrical or similar
• Ability to read and interpret schematics, wiring diagrams and harness drawings
• Knowledge and practical application of IEC standards commonly used in Germany for low-voltage systems, including: IEC 61131, IEC 61010, IEC 61508 / 61511
• Experience with version control systems (Git, Azure DevOps, etc.) and collaborative software development
• Excellent communication skills, structured working style and strong problem-solving ability
• Flexibility, adaptability and willingness to travel to national and international laboratories
• Previous experience in scientific facilities (laser, optics, nuclear or high-tech industries)

What sets you apart

• Fluent in German is a plus, but not mandatory
• Knowledge of PLCs or multi-axis stepper motor controllers
• Understanding of laser, optics or nuclear physics principles
• Experience with CAD/ PDM systems (Inventor, Vault, or similar)

What we offer

Our mission is motivation enough for many. But we also support our team with benefits that foster wellbeing and growth: 

• Public transport reimbursement 
• EGYM Wellpass fitness club access 
• Complimentary health insurance 
• Professional development support 
• Company pension plan
• Healthy office snacks 

For more information on how we process your application data, please review our privacy notice.

Who we are

The role

The day-to-day

• Define and own the end-to-end electronic architecture for marine robotic subsystems, ensuring consistency across hardware, software, AI, and navigation and control interfaces

• Lead the selection of components, define specifications, and establish electronic design standards that balance performance, cost, and manufacturability

• Collaborate with AI and software engineers to design hardware interfaces that support on-board inference, sensor fusion, and autonomous decision-making

• Work with navigation and control engineers to ensure electronic subsystems meet the requirements for guidance, communication, and real-time control

• Design schematics and PCB layouts in coordination with mechatronics engineers, ensuring proper form, fit, and function through analytical and simulation tools

• Mentor and guide engineers within the electronics discipline, raising the quality bar for design reviews, documentation, and technical decision-making

• Drive validation and verification campaigns — defining test strategies, performing hardware bring-up, and leading electrical troubleshooting to mature designs toward production readiness

• Produce and maintain comprehensive design documentation in line with Helsing's quality standards, including 2D/3D deliverables and manufacturing packages

You should apply if you

• Hold a Master's degree in Electrical Engineering, Electronics Engineering, or a closely related discipline

• Have designed, built, and validated complex electronic systems from concept through to production (schematic capture, PCB layout, and hardware integration)

• Have led or mentored other engineers on electronics design decisions, design reviews, or technical direction

• Have deep knowledge of electronic component integration, including experience using ECAD/MCAD interfaces to realise tightly packaged assemblies

• Have collaborated directly with software, AI, or control systems engineers to deliver integrated hardware–software solutions

• Communicate complex technical concepts clearly in English, both written and verbal, and can represent your discipline in cross-functional discussions

Note: We operate in an industry where women, as well as other minority groups, are systematically under-represented. We encourage you to apply even if you don’t meet all the listed qualifications; ability and impact cannot be summarised in a few bullet points.

Nice to Have

• Have designed electronics for maritime embedded systems, autonomous platforms, or similarly constrained operational environments

• Have practical experience with EMC design, testing, and certification

• Have worked with battery management systems or robotic power distribution architectures

• Have experience designing hardware interfaces for AI inference modules, sensor arrays, or autonomous navigation systems

• Have contributed to design-for-manufacture processes, including collaboration with contract electronics manufacturers

Join Helsing and work with world-leading experts in their fields 

• Helsing’s work is important. You’ll be directly contributing to the protection of democratic countries while balancing both ethical and geopolitical concerns

• The work is unique. We operate in a domain that has highly unusual technical requirements and constraints, and where robustness, safety, and ethical considerations are vital. You will face unique Engineering and AI challenges that make a meaningful impact in the world

• Our work frequently takes us right up to the state of the art in technical innovation, be it reinforcement learning, distributed systems, generative AI, or deployment infrastructure. The defence industry is entering the most exciting phase of the technological development curve. Advances in our field of world are not incremental: Helsing is part of, and often leading, historic leaps forward

• In our domain, success is a matter of order-of-magnitude improvements and novel capabilities. This means we take bets, aim high, and focus on big opportunities. Despite being a relatively young company, Helsing has already been selected for multiple significant government contracts

• We actively encourage healthy, proactive, and diverse debate internally about what we do and how we choose to do it. Teams and individual engineers are trusted (and encouraged) to practise responsible autonomy and critical thinking, and to focus on outcomes, not conformity. At Helsing you will have a say in how we (and you!) work, the opportunity to engage on what does and doesn’t work, and to take ownership of aspects of our culture that you care deeply about

What we offer

• A focus on outcomes, not time-tracking

• Competitive compensation and stock options

• Relocation support

• Social and education allowances

• Regular company events and all-hands to bring together employees as one team across Europe

• A hands-on onboarding program (affectionately labelled “Infraduction”), in which you will be building tooling and applications to be used across the company. This is your opportunity to learn our tech stack, explore the company, and learn how we get things done - all whilst working with other engineering teams from day one 

Helsing is an equal opportunities employer. We are committed to equal employment opportunity regardless of race, religion, sexual orientation, age, marital status, disability or gender identity. Please do not submit personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, trade union membership, data concerning your health, or data concerning your sexual orientation.

OUR VISION

When people use our technology to "bridge the gap" between the physical and digital worlds, they don’t just capture reality - they create a new one. In this new reality, they are smarter, more productive, more streamlined, and more creative - because they have the digital foundation to build the world they want to live in.

That’s what NavVis offers in all our products and services: the tools to not just map the world as it is, but to pave the way to a better future. To forge something new. Physical or digital, there is only one reality. And it’s the reality NavVis empowers people to build better. 

THE OPPORTUNITY

As a Quality Technician at NavVis, you will play a key role in ensuring the performance and reliability of our cutting-edge mobile mapping systems, used to create high-precision digital representations of real-world environments. You will join a cross-functional production team of over 10 technicians, contributing to the assembly and testing of complex electro-mechanical devices and ensuring that every component and finished system meets our high quality standards. 

HOW YOU WILL MAKE AN IMPACT

• Perform dimensional and visual inspections of mechanical (milled, injection-molded, painted) and electronic components (e.g., PCBs, cables, single-board computers)  

• Conduct in-process and final inspections to ensure correct assembly, functionality, and quality standards 

• Record inspection results and yields in the quality management system  

• Rework non‑conforming parts in accordance with defined procedures, where applicable. 

• Escalate recurring quality issues to Quality Engineering, Development, or Supply Chain teams 

• Work closely with the Assembly Team to clarify inspection criteria and improve workmanship  

• Support commissioning activities and selected assembly steps when required 

• Contribute to continuous improvement initiatives with the Quality Engineer 

WHAT WILL HELP YOU SUCCEED IN THE ROLE

• Experience in quality control, ideally in an electro-mechanical or manufacturing environment (typically gained over ~2 years) 

• Hands-on experience with mechanical measuring tools (e.g., calipers, micrometers, gauges)  

• Practical knowledge of electronics handling and basic PCB inspection  

• Confidence working with spreadsheets and quality tracking systems  

• Strong attention to detail, structured documentation skills, and a problem-solving mindset  

• Very good English communication skills; German skills are an advantage 

HOW WE WILL KNOW WE ARE A PERFECT MATCH

Your recruiting partner for this role is Lenka (she/her). You can expect to go through a screening call, and up to 3 rounds of interviews, where we would love to discover your passion and interests, introduce you to who we are and what drives us, and finally understand how we can potentially add value to each other's growth.

HOW WE WILL KEEP YOU SMILING

• It's important to take a break from work! We offer 30 days of paid time off per year
• Affordable access to a vast network of fitness and wellness facilities through EGYM Wellpass subsidy
• Deutschlandticket subsidy to support sustainable travel using public transport
• We offer flexible working hours and a hybrid work setup, enabling you to plan your work around your life, and not your life around work!
• We offer full visa and relocation support for international candidates
• An attractive bike leasing model through JobRad, in line with our commitment towards sustainable mobility
• A competitive compensation package that values the skills and experience you bring
• Up to 4000 EUR employee referral bonus 
• Financial support for local language classes to help you in your journey of integrating into the culture!

ABOUT US

THE OPPORTUNITY

The Electrical Hardware Engineering team is expanding to support critical new projects bringing cutting-edge mobile mapping technology from concept to production. You'll be joining a team that designs custom electronics for our scanning systems, working with everything from 10-layer PCBs with high-speed signals to rigid-flex designs that power our innovative hardware. 

This is a hands-on role for someone who loves diving deep into product development, PCB design and prototyping. You'll be the subject matter expert ensuring hardware stability, supporting new product launches, and helping transition research projects into production-ready devices. Your work will directly impact the reliability and performance of NavVis products used by customers worldwide. 

HOW YOU WILL MAKE AN IMPACT

• Design and develop advanced PCBs (4+ layers, high-speed signals, power management) for our mobile mapping devices, including compute architectures, image sensors, and LiDAR integration 

• Build and test prototypes quickly, using hands-on skills with soldering, lab equipment, and debugging to ensure hardware reliability 

• Lead full board development cycles from concept through production, owning the technical decisions on component and supplier selection 

• Collaborate closely with Mechanical Design, Embedded Software, Supply Chain, and Software teams to integrate electrical systems into our products 

WHAT WILL HELP YOU SUCCEED IN THE ROLE

• Bachelor’s degree in Electronics or equivalent practical experience 

• 5+ years as an Electrical/Electronics Engineer in product development 

• Strong PCB design experience (high‑speed signals, power management, component selection, 4+ layer boards; BGA, HDMI, MIPI, USB 3, and rigid‑flex experience is a plus) 

• Hands-on prototyping and soldering skills; comfortable using oscilloscopes, DMMs, and spectrum analyzers 

• Excellent communication, collaboration, and problem‑solving skills that allow you to thrive in fast‑paced, agile environments 

Additionally if you have; 

• Experience with Linux and firmware development 

• Python-based application or test tool development 

• Understanding of EMC testing and product compliance 

HOW WE WILL KNOW WE ARE A PERFECT MATCH

Your recruiting partner for this role is Sylvie. You can expect to go through a screening call, and up to 3 rounds of interviews, followed by an onsite visit to our Munich office, where we would love to discover your passion and interests, introduce you to who we are and what drives us, and finally understand how we can potentially add value to each other's growth.

HOW WE WILL KEEP YOU SMILING

• It's important to take a break from work! We offer 30 days of paid time off per year
• Affordable access to a vast network of fitness and wellness facilities through EGYM Wellpass subsidy
• Deutschlandticket subsidy to support sustainable travel using public transport
• We offer flexible working hours and a hybrid work setup, enabling you to plan your work around your life, and not your life around work!
• We offer full visa and relocation support for international candidates
• An attractive bike leasing model through JobRad, in line with our commitment towards sustainable mobility
• A competitive compensation package that values the skills and experience you bring
• Up to 4000 EUR employee referral bonus 
• Financial support for local language classes to help you in your journey of integrating into the culture!

The Role 

The Electronics Design Engineer will be a member of the hardware team delivering low‑noise, high‑frequency mixed‑signal control and instrumentation for our QKD systems. The role spans end‑to‑end board design in Altium (schematics, layout, DFM/DFT), precision analog signal chains, prototype bring‑up/validation, and, where needed, STM32 (F4/H7) firmware in C for control, calibration, and integration. You will work with existing automated measurement software in Python and extend it where needed, collaborate closely with optics, FPGA, and software, and support manufacturing. 

The Responsibilities 

The Electronics Design Engineer should expect to work in the following activities. 

• Hardware design, prototyping, and validation 
  • Owning hardware architecture and component selection for precision, lownoise, and highfrequency performance 
  • Designing lownoise analog and mixedsignal schematics and PCB layout in Altium 
  • Managing prototype builds and vendors; executing bringup; precision and highfrequency measurements (DC accuracy, noise spectral density, longterm drift, frequency response); lab debug and reworks 
  • Working with existing automated measurement software (Python) and extending it where needed 
• Firmware development on STM32 and interfacing in Python (secondary scope)
  • Designing and modifying STM32 F4/H7 firmware in C (HAL)
  • Interfacing with Python drivers/scripts for control and data acquisition 

• Test automation and CI
  • Building and extending automated board/firmware test setups (Python; instrument control via VISA/SCPI through the existing automated measurement software) to capture logs/metrics
  • Establishing repeatable build/test pipelines for firmware and board validation; archiving artifacts, measurements, and calibration data 

• Manufacturing support and releases
  • Producing manufacturing packages; supporting vendors through fabrication and assembly; designing/maintaining simple test fixtures
  • Owning hardware/firmware versioning and release notes; maintaining traceable revisions 

• Cross‑team collaboration and documentation
  • Collaborating with optics/FPGA/software on interfaces, calibration, timing/latency budgets, and integration
  • Authoring design docs, analyses and budgets, calibration/bringup procedures, and change logs
  • Maintaining detailed experimental documentation in Confluence 

The Requirements 

The Electronics Design Engineer is expected to have the following qualifications and experience. 

• 5+ years analog/mixedsignal electronics design for R&D/instrumentation; strong Altium for schematics and PCB layout; DFM/DFT 

• Deep analog fundamentals: lownoise signal chains (e.g., highfrequency TIAs/preamps, ADC drivers, antialiasing/reconstruction filters), precision references/measurements, grounding/guarding/shielding, lowleakage layout 

• Ability to set/close noise and error budgets; tolerance/Monte Carlo and worstcase analysis; SPICEclass simulation (LTspice/PSPICE, etc.) 

• Lab expertise: precision/HF measurements (DC accuracy, noise spectral density, longterm drift, frequency response, temperature dependency); oscilloscopes, spectrum analyzers; VNA as applicable 

• Awareness of EMC/EMI and safety constraints; designforcompliance and precompliance testing 

• Python for lab/test automation and instrument control; Git‑centric workflow 

• Proficiency in written and spoken English 

• Ability to be on‑site in Munich or Potsdam offices to work with hardware, when required 

• Applicants must have the right to work in Germany at the time of application. We do not provide visa sponsorship. 
• Must be eligible to obtain and maintain either (a) a U.S. Secret (or higher) security clearance or (b) an EU SECRET (or national equivalent) personnel security clearance. Employment is contingent on meeting applicable government security requirements; eligibility is determined by the competent authorities.

Good to have: 

• STM32 F4/H7 exposure; C with HAL 

• Familiarity with STM32 bootloaders/updates (DFU/OTA) 

• Experience with calibration flows and production test fixtures