Vast is looking for a Senior integration Specialist, reporting to the Supervisor AM and Integration, E-2,  to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

Responsibilities: 

• Serve as a technical authority for the assembly, integration, and testing of liquid rocket engine hardware and subsystems.
• Support rapid iteration and development testing, including configuration control, test turnaround, and readiness reviews.
• Lead and execute the most complex hands-on integrations of large and small, high-precision, and fragile assemblies.
• Define, validate, and enforce aerospace integration practices including safety wiring, helicoil installation, torque methodology, tube bending, flaring and hardware verification.
• Select, verify, and oversee the use of precision calibrated tools including torque wrenches, micrometers, and calipers.
• Interpret and apply engineering drawings, work instructions, specifications, bills of material, and P&IDs; identify discrepancies, drive resolution, and recommend design or process changes.
• Own the readiness, operation, and continuous improvement of the integration and test facilities.
• Lead subsystem test operations, including high-pressure operations, fluid fill/drain/handling, hazardous operations, and real-time sensor monitoring.
• Troubleshoot complex, cross-disciplinary issues across fluid, mechanical, and basic electrical systems; lead root-cause analysis and corrective actions.
• Author, review, and maintain build, test, maintenance, and safety documentation; ensure accuracy and adherence to standards.
• Identify, prioritize, and implement improvements to processes, tooling, and safety systems to increase reliability, throughput, and test site productivity.
• Mentor and technically develop technicians and specialists through cross-functional collaboration, formal training, and on-the-job coaching.
• Act as a primary interface between engineering, test operations, and the shop floor to ensure efficient execution and feedback loops.
• Uphold, evolve, and champion test processes, safety standards, and best practices across the organization.
• Oversee and ensure the safe operation of heavy equipment such as forklifts and overhead lifting equipment.

Minimum Qualifications:

• High school diploma or equivalent.
• 15+ years of experience in production, mechanical, manufacturing, integration, or test environments.

Preferred Skills & Experience:

• Extensive experience in aerospace, aviation, military, or other high-reliability operating environments.
• Deep hands-on experience with propulsion system assembly, integration, and testing.
• Advanced tube fitting and bending expertise with common industry fitting systems.
• Demonstrated leadership of propulsion hardware integration and high-pressure or cryogenic test operations.
• Extensive experience with gaseous oxygen (GOx), liquid propellant, and cryogenic system operations and maintenance.
• Familiarity with configuration control, test readiness reviews, and hazard analyses.

Additional Requirements:

• Willingness to work overtime, or weekends to support critical mission milestones.
• Ability to lift up to 25lbs unassisted.

Vast is looking for a Supervisor, E-2 Machine Shop, reporting to the E-2 Principal Engineer, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities: 

• Lead and mentor a team of programmer machinists.
• Conduct daily team meetings to communicate goals and expectations.
• Coordinate work schedules and assignments to optimize productivity. 
• Work closely with manufacturing planners for efficient scheduling and prioritization of jobs. 
• Ensure aerospace industry quality standards are followed. 
• Implement and oversee quality control measures. 
• Continual optimization of machining processes for efficiency. 
• Collaborate with engineering teams and other departments for process improvements. 
• Coordinate repairs with the maintenance teams in a timely manner. 
• Enforce safety protocols in the machine shop. 
• Identify training needs for the team. 
• Develop and foster strong relationships with upper management.

Minimum Qualifications:

• 5-7 years of experience in a manufacturing environment.
• Bachelors degree or equivalent in experience.
• Knowledge of machining processes, CNC equipment, and tooling.

Preferred Skills & Experience:

• Proven leadership abilities with a track record of team management. 
• Previous experience in a supervisory role in a machine shop or manufacturing environment.
• Familiarity with lean manufacturing principles and continuous improvement methodologies. 
• Commitment to safety, quality, and adherence to standards. 
• Ability to analyze data and implement process improvements. 
• Willingness to adapt to changing priorities and drive innovation within the organization.
• Strong problem-solving skills and ability to make timely decisions.
• Effective communication and collaboration skills.

Additional Requirements:

• Willingness to work evenings and/or weekends to support critical mission milestones.
• Ability to lift up to 25 lbs unassisted.

Vast is looking for a Senior Quality Engineer, reporting to the E-2 Principal Engineer,  to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities: 

• Define and implement quality methodologies
• Hands on dimensional inspection skills using mechanical tools
• Identify and track manufacturing non-conformities and proactively work with manufacturing and engineering to address them
• Use expertise to contribute to the prevention of defects and non-conformities, ultimately reducing the likelihood of recalls and/or customer complaints.
• Drive continuous improvement initiatives by analyzing quality data, identifying trends, and implementing corrective and preventive actions to enhance the overall quality of our products and reduce costs.
• CMM programming skills
• Create and define technical and quality requirements based on customer and program requirements and expectations for NPI and manufacturing phases.
• Exert expert domain knowledge and effectively apply root cause analysis, FMEA, Cause Mapping, Cause & Effect diagrams, 8D, 5S and structured RCCA to drive effective and meaningful corrective action.
• Develop and approve process controls to regulate acceptance of critical characteristics.
• Recommend technical product improvements to reduce risk and potential defect opportunities and provide feedback as appropriate on manufacturing methods and technologies.

Minimum Qualifications:

• 5+ years experience with demand fast paced company working on quality, manufacturing or responsible engineer role
• Bachelor of Science degree in Mechanical Engineering, Electrical Engineering, or other engineering discipline
• Expert knowledge and experience in GD&T, CMM, MSA, Tooling, AS9100, AS9102, AS9103.
• Proficient in Blueprint Reading and First Article Inspection (FAI) and interpretation of Engineering Process Specifications.

Preferred Skills & Experience:

• Master's degree in engineering, business, or supply chain.
• Certified Black / Green belt lean and Six-Sigma quality engineering methodologies.
• Experience with Quality Management Systems (ISO 9000 / AS9100 / AS6500 / NADCAP).
• Experience in statistical controls and methods (e.g. MSA, GR&R, Design of Experiments, Six Sigma, etc.).
• Ability to thrive in a fast paced environment. 
• Effective written, verbal and presentation communication skills.

Additional Requirements:

• Ability to lift up to 25 lbs unassisted.

Vast is looking for a Senior Lathe Programmer, reporting to the E-2 Principal Engineer, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.

This will be a full-time, non-exempt position located in our Hawthorne facility.

This role will specifically support the Launcher E-2 liquid rocket engine program. Vast has the ambitious goal for E-2 to be the world’s highest-performing engine for small launchers, optimized for mass production and low cost. You will be a key team member helping complete the development of our E-2 engine into a reliable, high-performance product.

We are seeking a skilled and experienced Senior Programmer to join our team to machine E-2 parts and tools. You will play a crucial role in the development, fabrication, maintenance, and repair of various tools, jigs, and fixtures used in our production processes. Your precision, attention to detail, and ability to work with a variety of materials and machinery will contribute to the efficiency and quality of our manufacturing operations.

Responsibilities: 

• Proficiency in Mastercam for turning centers.
• Design, develop, and manufacture tools, dies, jigs, fixtures, molds, and other equipment required for production, ensuring they meet exacting specifications and tolerances.
• Choose appropriate materials for tool construction based on factors such as strength, durability, and compatibility with the manufacturing process. 
• Interpret engineering drawings, schematics, and technical specifications to accurately create or modify tools. 
• Inspect finished tools to verify their accuracy, precision, and quality, making necessary adjustments to ensure optimal performance. 
• Troubleshoot, repair, and maintain existing tools to extend their lifespan and ensure continuous production operations. 
• Work closely with design engineers, production managers, and other team members to ensure tools align with production requirements and goals. 
• Identify opportunities for process improvement and innovation in tool design and manufacturing techniques to enhance efficiency, safety, and product quality. 
• Maintain comprehensive records of tool designs, modifications, maintenance procedures, and any troubleshooting activities.
• Adhere to all safety protocols and guidelines, promoting a safe working environment for yourself and your colleagues.

Minimum Qualifications:

• High school diploma or equivalency certificate.
• 10+ years experience in related machining role, 5+ years CAM with mill turn experience (lathe Y axis.)

Preferred Skills & Experience:

• Experience with Fanuc controller and Doosan / DNM PUMA turning centers.
• Experience turning aerospace materials like Inconel 718, SS304, SS316, AL7075.
• Experience fixturing and turning metal additive manufacturing parts.
• Strong GD&T skills, and experience creating and reviewing drawings.
• Proficiency in operating a variety of machine tools, including lathes, mills, grinders, and EDM machines. 
• Meticulous attention to detail and precision in all tasks, ensuring tools meet strict tolerances and specifications. 
• Strong problem-solving skills to identify issues, troubleshoot problems, and implement effective solutions. 
• Ability to adapt to changing manufacturing needs and work in a dynamic environment. 
• Effective communication skills to collaborate with cross-functional teams and provide insights on tool design and manufacturing processes.
• Commitment to maintaining a safe work environment and following all safety protocols.
• Capable of standing for extended periods and performing manual tasks that may require moderate physical effort.

Additional Requirements:

• Willingness to work overtime, or weekends to support critical mission milestones.
• Ability to lift up to 25 lbs unassisted.

Vast is looking for a Quality Inspection Specialist II, reporting to the E-2 Principal Engineer, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

This will be a full-time, non-exempt position located in our Hawthorne location. 

Responsibilities: 

• Define and execute quality methodologies to support full product traceability
• Hands on dimensional inspection skills using mechanical tools
• CMM programming skills 
• Collaborate with responsible engineers, manufacturing  engineers and technicians to review designs and drawings
• Assess, define, improve and communicate inhouse inspection capabilities
• Identify and track manufacturing non-conformities and proactively work with manufacturing and engineering to address them
• Develop, approve and execute process inspection controls to regulate acceptance of critical characteristics.
• Use expertise to contribute to the prevention of defects and non-conformities, ultimately reducing the likelihood of recalls and/or customer complaints.
• Drive continuous improvement initiatives by analyzing quality data, identifying trends, and implementing corrective and preventive actions to enhance the overall quality of our products and reduce costs.
• Create and define technical and quality requirements based on customer and program requirements and expectations for NPI and manufacturing phases.
• Effectively apply root cause analysis, FMEA, Cause Mapping, Cause & Effect diagrams,and structured RCCA to drive corrective action.
• Recommend technical product improvements to reduce risk and potential defect opportunities and provide feedback as appropriate on manufacturing methods and technologies.

Minimum Qualifications:

• 10+ years experience with demand fast paced company working on quality, manufacturing or responsible engineer role
• Expert knowledge and experience in GD&T, CMM, MSA, Tooling, AS9100, AS9102, AS9103.
• Proficient in Blueprint Reading and First Article Inspection (FAI) and interpretation of Engineering Process Specifications.

Preferred Skills & Experience:

• Certified Black / Green belt lean and Six-Sigma quality engineering methodologies.
• Experience with Quality Management Systems (ISO 9000 / AS9100 / AS6500 / NADCAP).
• Experience in statistical controls and methods (e.g. MSA, GR&R, Design of Experiments, Six Sigma, etc.).
• Ability to thrive in a fast paced environment. 
• Effective written, verbal and presentation communication skills.
• Experience with NDT.

Additional Requirements:

• Willingness to work evenings and/or weekends to support critical mission milestones.
• Ability to lift up to 25lbs unassisted.

Vast is looking for an Propulsion Test Engineer, reporting to the Senior Manager, Engineering (E-2), to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.

This will be a full-time, exempt position located in our Mojave location. 

Responsibilities: 

• Sit on console as Test Conductor and Test Director running hotfires of the E-2 LOX/Kerosene oxidizer-rich staged combustion engine. 
• Plan and lead hazardous operations including work with high pressures and cryogenic fluids.
• Assist in driving engine development, qualification, and acceptance test campaigns to completion.
• Author and maintain test procedures, sequences, and configuration files for hazardous operations.
• Support Test Readiness Reviews (TRRs). 
• Work side by side with the test stand technicians during fabrication of test stand hardware and integration of test articles.
• Work on projects to design and modify fluid and electrical systems on the engine test stands.
• Troubleshoot fluid, mechanical, electrical, and software related systems on the test stands.  
• Implement continuous improvements to improve safety and test site productivity.

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 2+ years of experience in the operation, design and development of fluid systems, or hardware testing.

Preferred Skills & Experience:

• Experience handling cryogenic fluids.
• Experience with NX and Teamcenter.
• Experience with Epsilon3.
• Experience with JIRA / Confluence.
• Experience with coding languages (Python, Matlab, Visual Basic).
• Experience building and testing high pressure fluid/gas systems.
• Experience reviewing data and taking corrective actions based on findings.
• Experience with common instrumentation and controls systems and sensors.
• Tube fitting & bending, familiar with common industry fittings systems.
• Read & interpret Plumbing and Instrumentation Diagrams (P&IDs).
• Excellent communication skills, both written and oral, along with effective teamwork abilities.
• Ability to work in multi-disciplinary teams.
• Ability and willingness to thrive in a fast-paced, rapidly changing work environment.

Additional Requirements:

• Willingness to work evenings and/or weekends to support critical mission milestones.
• Ability to lift up to 25 lbs unassisted.

Pay Range: 

• Propulsion Test Engineer I: $86,000 - $120,000
• Propulsion Test Engineer II: $110,000 - $155,000

Vast is looking for a Turbomachinery Engineer II, reporting to the Senior Manager of E-2 Engineering, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

You will contribute expertise toward creating the world’s highest-performing engine for small launchers while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities: 

• Design: work with our team and Chief Engineer to advance the design of E-2.  Create models and drawings of parts and assemblies.  Perform calculations and analyses with team support.
• Manufacturing: work with our internal manufacturing team to create finished E-2 parts.  Support parts through 3d-printing, machining, post processing, and inspection.  Incorporate feedback to improve design for manufacturing.
• Assembly and test: support our integration team with propulsion component assembly build and testing.
• Create schematics and document processes.
• Participate in engine testing with our test team and support with troubleshooting as needed.
• Communicate effectively with entire team to regularly provide updates on progress and issues.
• Always follow proper safety procedures and wear personal protective equipment in the workplace.

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 3+ years of experience with mechanical design, development, fabrication, assembly, or test (internships included)

Preferred Skills & Experience:

• Ability to work as a teammate and independently to achieve ambitious goals
• Hands-on engineering (Full-stack: computer to wrench to broom)
• Communication (Written, visual, slides)
• CAD (NX preferred)
• Geometric dimensioning and tolerancing (GD&T)
• Problem-solving
• Capable to grow positive, respectful, and professional relationships
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work
• ANSYS
• MATLAB

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Work in an outdoor environment exposed to extreme weather conditions.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Vast is looking for a Senior Propulsion Engineer, reporting to the Senior Manager of E-2 Engineering, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities

• Design: work with our team and Chief Engineer to advance the design of E-2.  Create models and drawings of parts and assemblies.  Perform calculations and analyses with team support.
• Manufacturing: work with our internal manufacturing team to create finished E-2 parts.  Support parts through 3d-printing, machining, post processing, and inspection.  Incorporate feedback to improve design for manufacturing.
• Assembly and test: support our integration team with propulsion component assembly build and testing
• Create schematics and document processes
• Participate in engine testing with our test team and support with troubleshooting as needed
• Communicate effectively with entire team to regularly provide updates on progress and issues
• Always follow proper safety procedures and wear personal protective equipment in the workplace

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline
• 5+ years of experience with mechanical design, development, fabrication, assembly, or test (internships included)

Preferred Skills and Experience:

• Ability to work as a teammate and independently to achieve ambitious goals
• Hands-on engineering (Full-stack: computer to wrench to broom)
• Communication (Written, visual, slides)
• CAD (NX preferred)
• Geometric dimensioning and tolerancing (GD&T)
• Problem-solving
• Capable to grow positive, respectful, and professional relationships
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work
• ANSYS
• MATLAB

Additional Requirements:

• Able to lift 25 lbs unassisted
• Work in an outdoor environment exposed to extreme weather conditions
• Willingness to work evenings and/or weekends to support critical mission milestones

Vast is looking for a Mechanical Engineer II, reporting to the Senior Manager of E-2 Engineering, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities: 

• Design: work with our team and Chief Engineer to advance the design of E-2.  Create models and drawings of parts and assemblies.  Perform calculations and analyses with team support.
• Manufacturing: work with our internal manufacturing team to create finished E-2 parts.  Support parts through 3d-printing, machining, post processing, and inspection.  Incorporate feedback to improve design for manufacturing.
• Assembly and test: support our integration team with propulsion component assembly build and testing.
• Create schematics and document processes.
• Participate in engine testing with our test team and support with troubleshooting as needed.
• Communicate effectively with entire team to regularly provide updates on progress and issues.
• Always follow proper safety procedures and wear personal protective equipment in the workplace.

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 3+ years of experience with mechanical design, development, fabrication, assembly, or test (internships included)

Preferred Skills & Experience:

• Ability to work as a teammate and independently to achieve ambitious goals
• Hands-on engineering (Full-stack: computer to wrench to broom)
• Communication (Written, visual, slides)
• CAD (NX preferred)
• Geometric dimensioning and tolerancing (GD&T)
• Problem-solving
• Capable to grow positive, respectful, and professional relationships
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work
• ANSYS
• MATLAB

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Work in an outdoor environment exposed to extreme weather conditions.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Vast is looking for a Combustion Devices Engineer II, reporting to the Senior Manager of E-2 Engineering, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

You will contribute expertise toward creating the world’s highest-performing engine for small launchers while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help complete the flight engine design and transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities: 

• Design: work with our team and Chief Engineer to advance the design of E-2.  Create models and drawings of parts and assemblies.  Perform calculations and analyses with team support.
• Manufacturing: work with our internal manufacturing team to create finished E-2 parts.  Support parts through 3d-printing, machining, post processing, and inspection.  Incorporate feedback to improve design for manufacturing.
• Assembly and test: support our integration team with propulsion component assembly build and testing.
• Create schematics and document processes.
• Participate in engine testing with our test team and support with troubleshooting as needed.
• Communicate effectively with entire team to regularly provide updates on progress and issues.
• Always follow proper safety procedures and wear personal protective equipment in the workplace.

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 3+ years of experience with mechanical design, development, fabrication, assembly, or test (internships included)

Preferred Skills & Experience:

• Ability to work as a teammate and independently to achieve ambitious goals
• Hands-on engineering (Full-stack: computer to wrench to broom)
• Communication (Written, visual, slides)
• CAD (NX preferred)
• Geometric dimensioning and tolerancing (GD&T)
• Problem-solving
• Capable to grow positive, respectful, and professional relationships
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work
• ANSYS
• MATLAB

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Work in an outdoor environment exposed to extreme weather conditions.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Vast is looking for an Instrumentation and Controls Engineer, reporting to the Senior Manager, Engineering (E-2), to support the development of the systems that will be required for the design, build, and test of the E-2 LOX/Kerosene oxidizer-rich staged combustion engine.

This will be a full-time, exempt position located in our Mojave location. 

Responsibilities: 

• Support test engineers by maintaining all test stand instrumentation and control systems on all rocket engine and structures test stands.
• Generate and maintain electrical schematics for all test stand instrumentation and control systems.  
• Manage all instrumentation calibration records.
• Manage all instrumentation checkout and calibration equipment.
• Coordinate recalibration of all instrumentation.
• Work alongside electrical technicians to build, test, and maintain electrical systems on rocket engines and rocket engine test stands.
• Troubleshoot electrical, mechanical, and software related systems on the test stands. 
• Implement continuous improvements to improve safety and test site productivity

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 2+ years of experience in the operation, design and development of instrumentation and controls equipment.

Preferred Skills & Experience:

• Experience with PLCs.
• Experience with National Instruments hardware and LabVIEW.
• Experience with coding languages (Python, Matlab Visual Basic).
• Experience with strain gauges, IEPE accelerometers, TCs, RTDs and 4-20mA loop sensors.  
• Ability to read, understand, and interpret technical documentation such as wire diagrams, sensor data sheets, and data systems equipment manuals.
• Experience with NX and Teamcenter.
• Experience with JIRA / Confluence.
• Extreme attention to detail.
• Read & interpret Plumbing and Instrumentation Diagrams (P&IDs).
• Excellent communication skills, both written and oral, along with effective teamwork abilities.
• Ability and willingness to thrive in a fast-paced, rapidly changing work environment.

Additional Requirements:

• Willingness to work overtime, or weekends to support critical mission milestones.
• Ability to lift up to 25 lbs unassisted.

Pay Range: 

• Instrumentation and Controls Engineer I: $86,000 - $120,000
• Instrumentation and Controls Engineer II: $110,000 - $155,000

Vast is looking for an Electrical Engineer, reporting to the Director of E-2 Engineering, to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

This will be a full-time, exempt position located in our Hawthorne location. 

Responsibilities:

• Responsible Engineer for the flight engine controller and instrumentation.
• Work with test team to integrate engine controller with test stand.
• Design, build, and test circuit boards and write software for engine controller, throttles, and TVC.
• Procure, calibrate, install, and troubleshoot engine instrumentation.
• Responsible for wiring harnesses and mounting avionics on engine.
• Create electronics schematics and models/drawings of parts and assemblies.  Perform calculations and analyses with team support.
• Create schematics and document processes.
• Participate in engine testing with our test team and support with troubleshooting as needed.
• Communicate effectively with entire team to regularly provide updates on progress and issues.
• Always follow proper safety procedures and wear personal protective equipment in the workplace.

Minimum Qualifications:

• Bachelor’s degree in an engineering discipline.
• 2+ years of experience with electronics design, development, fabrication, assembly, or test (internships included).

Preferred Skills and Experience:

• Ability to work as a teammate and independently to achieve ambitious goals.
• Hands-on engineering (Full-stack: computer to wrench to broom).
• Electronics and circuit boards.
• Communication (Written, visual, slides).
• Coding (MATLAB, C++, javascript, C, Arduino).
• CAD (NX preferred).
• Geometric dimensioning and tolerancing (GD&T).
• Problem-solving.
• Capable to grow positive, respectful, and professional relationships.
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work.

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Work in an outdoor environment exposed to extreme weather conditions.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Pay Ranges: 

• Electrical Engineer I: $86,000 - $120,000
• Electrical Engineer II: $110,000 - $155,000

Vast is looking for an Integration Technician, reporting to the Supervisor, Additive Manufacturing and Integration, E-2,  to create the world's highest performing engine for small launchers, while optimizing for production and low cost. In this role, you will join a team with exciting momentum that has produced and successfully tested fully integrated engine development samples. You will be a key member who will help transition the system from development to production.

This will be a full-time, non-exempt position located in our Hawthorne location. 

Responsibilities: 

• Assemble, install, and test liquid rocket engine hardware
• Perform hands-on integration of large and small, high-precision, and fragile assemblies
• Use precision calibrated tools including torque wrenches, micrometers, and calipers
• Execute aerospace integration practices such as safety wiring, helicoil installation, and hardware verification
• Read and interpret engineering drawings, work instructions, specifications, bills of material, and P&IDs
• Build, operate, and maintain test facilities, and fluid systems including propellant, high-pressure, and cryogenic systems
• Conduct engine and subsystem test operations, including high-pressure operations, fluid fill/drain/handling, and real-time sensor monitoring
• Troubleshoot and perform maintenance on fluid, mechanical, and basic electrical systems
• Support rapid iteration and development testing
• Document build, test, and maintenance activities
• Adhere to and help refine test processes, safety standards, and best practices
• Support other shop floor teams through cross-functional collaboration and training
• Operate heavy equipment such as forklifts and overhead lifting equipment.

Minimum Qualifications:

• High school diploma, equivalency certificate or equivalent work experience. 
• 4+ years of experience in production, mechanical, or manufacturing environment.
• Hands-on hardware integration and high-pressure testing experience.

Preferred Skills & Experience:

• Experience in the aerospace industry, aviation, military, or other high-reliability operating environments.
• Experience in the assembly and testing of propulsion systems.
• Tube fitting and bending experience with common industry fitting systems.
• Experience with gaseous oxygen (GOx), liquid propellant, and cryogenic handling and systems maintenance.

Additional Requirements:

• Must be willing to work all shifts, overtime, and/or weekends as needed.
• Must be able to lift at least 25 lbs. unassisted.

Pay Range: 

• Integration Technician II: $29.00 - $42.00
• Integration Technician III: $33.00 - $47.00
• Senior Integration Technician: $40.00 - $55.00