Standard Nuclear, Inc.
Titans Wanted.
Standard Nuclear delivers the essential building blocks of nuclear power at industrial scale.
Pick a job to read the details
Tap any role on the left — its description and apply link will open here.
Chemical Operator
Share this job
Location: Oak Ridge, TN
Schedule: Full-Time
FUNCTION
The Chemical Operator will support Standard Nuclear’s chemical processing and materials production operations by operating, monitoring, and maintaining equipment used in sol-gel processing and chemical dissolution systems. This is a hands-on role involving solution mixing, reactor operation, particulate washing and drying, filtration, liquid waste handling, and general materials processing.
Operators will be cross-trained across multiple systems and will support operations in Standard Nuclear’s Oak Ridge facilities to ensure consistent production output. This position requires mechanical aptitude, attention to detail, and the ability to follow procedures closely. Prior experience with the specific equipment or processes is not required — strong operators from chemical, industrial, or manufacturing environments are encouraged to apply.
RESPONSIBILITIES
Sol-Gel & Dissolution Operations
- Operate equipment used in sol-gel processing, including mixers, vibratory pumps, wash systems, heating/drying units, and filtration systems.
- Prepare chemical solutions by measuring, mixing, and adjusting feed components according to established procedures.
- Support dissolution processes involving powders, aqueous solutions, and controlled chemical reactions.
- Perform washing steps using oxide solutions and rinsing equipment to clean or condition material batches.
Chemical Handling & Process Execution
- Handle chemical powders, solutions, and liquid waste streams following approved safety practices.
- Monitor process parameters, system pressures, solution levels, temperatures, and flow rates.
- Document batch data, equipment readings, and process deviations accurately.
- Conduct routine cleaning, equipment resets, and system preparation between production runs.
Equipment Operation & Troubleshooting
- Operate pumps, valves, pneumatic systems, heaters, furnaces, filtration modules, and separation equipment.
- Perform basic troubleshooting on mechanical and chemical processing systems.
- Assist maintenance or engineering staff with system adjustments, repairs, or calibration activities.
Safety, Quality & Compliance
- Follow all Standard Nuclear environmental, health, and safety (EH&S) requirements, including hazardous material handling and PPE protocols.
- Maintain accurate records in accordance with quality assurance procedures.
- Support internal audits, inspections, and readiness reviews.
- Adhere strictly to written procedures and report any deviations or safety concerns immediately.
Cross-Training & Production Support
- Train across multiple chemical processing areas to provide operational flexibility.
- Support production operations across Standard Nuclear’s Oak Ridge facilities as needed.
- Collaborate with engineering, quality, and operations teams to improve process consistency and efficiency.
PREFERED QUALIFICATIONS
(No degree required — candidates from manufacturing, chemical processing, or industrial operations are encouraged to apply.)
Minimum Requirements
- 3+ years of experience in chemical processing, industrial manufacturing, or mechanical/process operations.
- Ability to safely handle powders, solutions, pumps, mixers, and industrial processing equipment.
- Familiarity with basic chemical handling and general industrial safety practices.
- Comfortable working with wash solutions, liquid waste systems, and cleaning processes.
- Ability to follow detailed procedures and record accurate operational data.
- Ability to lift 50 lbs., work at heights, and work in environments involving heat, noise, or odors.
- Ability to work in controlled or restricted areas with required PPE.
Preferred Experience (Not Required)
- Experience in sol-gel processing, wet chemistry, or materials processing.
- Prior work with reactors, mixing systems, dry/wet separation equipment, or filtration modules.
- Experience in plant start-up, new equipment commissioning, or scale-up environments.
- Exposure to regulated operations (NQA-1, ISO, cGMP, etc.).
- Lean/Six Sigma or continuous improvement familiarity.
BENEFITS
- Health, Dental & Vision Insurance
- Health Savings Account
- Disability and Life Insurance
- 401K Plan
- Paid Time Off, Holidays
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
- Work is performed in chemical processing and industrial manufacturing areas.
- PPE such as gloves, safety glasses, and respirators may be required.
- Some work occurs in controlled or restricted-access environments involving powders and chemical solutions.
Standard Nuclear embraces equal opportunity and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Ready to apply?
Apply to Standard Nuclear, Inc.
Mechanical Operator
Share this job
Location: Idaho Falls, ID
Schedule: Full-Time
FUNCTION
The Mechanical Operator will support Standard Nuclear’s production operations by operating, maintaining, and troubleshooting mechanical processing equipment used in the manufacture of advanced ceramic and particulate materials. This is a hands-on role involving high-temperature equipment, mechanical fixtures, gas-flow systems, compaction tools, heat-treatment units, and various mechanical assemblies.
Operators in this role will be cross-trained across multiple processing areas and will support operations at Standard Nuclear’s Idaho facilities as production needs evolve. Candidates do not need prior experience with specialized equipment—strong mechanical aptitude and experience in industrial or manufacturing environments is sufficient.
RESPONSIBILITIES
Equipment Operation
- Operate mechanical processing systems including high-temperature units, gas-controlled reactors, compaction equipment, and mechanical handling systems.
- Adjust equipment parameters such as temperature, pressure, gas flow, timing, and mechanical settings according to defined procedures.
- Load, inspect, and maintain mechanical fixtures, tooling, and material batches.
- Monitor equipment performance and respond to alarms, process deviations, or abnormal conditions.
Mechanical Maintenance & Troubleshooting
- Perform routine maintenance, cleaning, and basic repairs on mechanical equipment and fixtures.
- Replace wear components, adjust mechanical assemblies, and assist with equipment setup and changeovers.
- Identify operational issues and coordinate with maintenance and engineering teams for resolution.
Process Execution & Documentation
- Follow detailed work instructions for operating, adjusting, and monitoring mechanical systems.
- Record process data, measurements, and equipment readings accurately in production logs.
- Support process optimization by providing feedback on equipment behavior and workflow improvements.
Safety, Quality & Compliance
- Follow all Standard Nuclear environmental, health, and safety (EH&S) requirements, including use of PPE and safe handling of high-temperature and mechanical equipment.
- Adhere to quality assurance procedures and report nonconformances or equipment concerns promptly.
- Support audits, inspections, and operational readiness activities.
Cross-Training & Production Support
- Train across multiple mechanical systems to provide operational flexibility across manufacturing areas.
- Work across Standard Nuclear’s Idaho production locations as needed to support manufacturing demands.
- Collaborate with engineering, operations, and quality teams to meet production schedules and resolve mechanical or process challenges.
PREFERED QUALIFICATIONS
(No degree required — candidates with strong mechanical or industrial backgrounds are encouraged to apply.)
Minimum Requirements
- 3+ years of experience as a mechanical technician, industrial operator, manufacturing technician, or similar hands-on role.
- Ability to operate, adjust, and troubleshoot mechanical equipment, tools, and fixtures.
- Comfort working with high-temperature systems, gas-flow equipment, and mechanical assemblies.
- Ability to follow detailed procedures and record accurate data.
- Ability to lift 50 lbs., work at heights, and work in environments involving heat, noise, or odors.
- Ability to work in controlled or restricted-access areas with required PPE.
Preferred Experience (Not Required)
- Experience with high-temperature furnaces, heat-treatment systems, compaction tools, or pneumatic/mechanical equipment.
- Exposure to industrial processing, maintenance, or materials-handling environments.
- Experience with equipment start-up, commissioning, or process scale-up.
- Familiarity with regulated or quality-controlled environments (NQA-1, ISO, etc.).
- Strong mechanical troubleshooting skills or hands-on mechanical background.
BENEFITS
- Health, Dental & Vision Insurance
- Health Savings Account
- Disability and Life Insurance
- 401K Plan
- Paid Time Off, Holidays
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
- Work is performed in chemical processing and industrial manufacturing areas.
- PPE such as gloves, safety glasses, and respirators may be required.
- Some work occurs in controlled or restricted-access environments involving powders and chemical solutions.
Standard Nuclear embraces equal opportunity and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Ready to apply?
Apply to Standard Nuclear, Inc.
Mechanical Operator
Share this job
Location: Oak Ridge, TN
Schedule: Full-Time
FUNCTION
The Mechanical Operator will support Standard Nuclear’s production operations by operating, maintaining, and troubleshooting mechanical processing equipment used in the manufacture of advanced ceramic and particulate materials. This is a hands-on role involving high-temperature equipment, mechanical fixtures, gas-flow systems, compaction tools, heat-treatment units, and various mechanical assemblies.
Operators in this role will be cross-trained across multiple processing areas and will support operations at Standard Nuclear’s Oak Ridge facilities as production needs evolve. Candidates do not need prior experience with specialized equipment—strong mechanical aptitude and experience in industrial or manufacturing environments is sufficient.
RESPONSIBILITIES
Equipment Operation
- Operate mechanical processing systems including high-temperature units, gas-controlled reactors, compaction equipment, and mechanical handling systems.
- Adjust equipment parameters such as temperature, pressure, gas flow, timing, and mechanical settings according to defined procedures.
- Load, inspect, and maintain mechanical fixtures, tooling, and material batches.
- Monitor equipment performance and respond to alarms, process deviations, or abnormal conditions.
Mechanical Maintenance & Troubleshooting
- Perform routine maintenance, cleaning, and basic repairs on mechanical equipment and fixtures.
- Replace wear components, adjust mechanical assemblies, and assist with equipment setup and changeovers.
- Identify operational issues and coordinate with maintenance and engineering teams for resolution.
Process Execution & Documentation
- Follow detailed work instructions for operating, adjusting, and monitoring mechanical systems.
- Record process data, measurements, and equipment readings accurately in production logs.
- Support process optimization by providing feedback on equipment behavior and workflow improvements.
Safety, Quality & Compliance
- Follow all Standard Nuclear environmental, health, and safety (EH&S) requirements, including use of PPE and safe handling of high-temperature and mechanical equipment.
- Adhere to quality assurance procedures and report nonconformances or equipment concerns promptly.
- Support audits, inspections, and operational readiness activities.
Cross-Training & Production Support
- Train across multiple mechanical systems to provide operational flexibility across manufacturing areas.
- Work across Standard Nuclear’s Oak Ridge production locations as needed to support manufacturing demands.
- Collaborate with engineering, operations, and quality teams to meet production schedules and resolve mechanical or process challenges.
PREFERED QUALIFICATIONS
(No degree required — candidates with strong mechanical or industrial backgrounds are encouraged to apply.)
Minimum Requirements
- 3+ years of experience as a mechanical technician, industrial operator, manufacturing technician, or similar hands-on role.
- Ability to operate, adjust, and troubleshoot mechanical equipment, tools, and fixtures.
- Comfort working with high-temperature systems, gas-flow equipment, and mechanical assemblies.
- Ability to follow detailed procedures and record accurate data.
- Ability to lift 50 lbs., work at heights, and work in environments involving heat, noise, or odors.
- Ability to work in controlled or restricted-access areas with required PPE.
Preferred Experience (Not Required)
- Experience with high-temperature furnaces, heat-treatment systems, compaction tools, or pneumatic/mechanical equipment.
- Exposure to industrial processing, maintenance, or materials-handling environments.
- Experience with equipment start-up, commissioning, or process scale-up.
- Familiarity with regulated or quality-controlled environments (NQA-1, ISO, etc.).
- Strong mechanical troubleshooting skills or hands-on mechanical background.
BENEFITS
- Health, Dental & Vision Insurance
- Health Savings Account
- Disability and Life Insurance
- 401K Plan
- Paid Time Off, Holidays
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
- Work is performed in chemical processing and industrial manufacturing areas.
- PPE such as gloves, safety glasses, and respirators may be required.
- Some work occurs in controlled or restricted-access environments involving powders and chemical solutions.
Standard Nuclear embraces equal opportunity and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Ready to apply?
Apply to Standard Nuclear, Inc.