SUPERVISOR, DIAMOND TURNING (STARLINK)

The Starlink Diamond Turning team develops and produces sub-micron tolerance optics for our satellite constellation at production volumes. The Diamond Turning Supervisor will drive a culture of quality while developing exceptional Diamond Turning machinists and technicians, meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent diamond turning excellence. 

RESPONSIBILITIES:  

• Lead and manage a team of Diamond Turning Technicians and Machinists 
• Set production schedules while maintaining consistent communication with stakeholders 
• Meet demand requirements for our customers, forecast potential capacity deficiencies, remove quality/production blockers as they appear 
• Manage and optimize machine/labor configuration to meet customer demand  
• Regularly drive improvements with operations to improve manufacturability, cycle times, cost, and quality 
• Manage schedules, timecards, and direct report performance 
• Ensure all processes have accessible and correct documentation    
• Set priorities for the team based on strengths and maximizing output; delegate and manage team bandwidth to achieve successful tasks and projects 
• Coordinate with engineering and leadership to ensure Diamond Turning’s focus correctly prioritizes projects that are the most impactful to Starlink success 
• Think creatively, question the status quo while following documentation and maintaining prescribed quality standards 
• Implement machine maintenance schedules and back-up spares availability to ensure uptime and output performance 

BASIC QUALIFICATIONS: 

• High school diploma or equivalency certificate
• 5+ years of professional experience working in a production/manufacturing environment 
• 1+ years of experience leading a team or project 

PREFERRED SKILLS AND EXPERIENCE: 

• 3+ years diamond turning experience 
• 5+ years leadership experience in a production or development setting 
• Demonstrated experience troubleshooting diamond turned hardware 
• Demonstrated experience producing diamond turned optics in a production setting 
• Programming experience using Nanocam or similar software 
• Optical metrology experience using CMMs, interferometers, and other optics metrology 
• Experience with interdisciplinary project management 

ADDITIONAL REQUIREMENTS: 

• Travel to vendor sites may be required 
• Travel to launch and test sites may be required 

COMPENSATION AND BENEFITS:    
    
Pay range:    
Supervisor: $110,000.00 - $140,000.00/per year    
    
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MECHANICAL ENGINEER – PRECISION MACHINING (STARLINK)

As a Mechanical Engineer at Starlink you will have the opportunity to utilize your knowledge, experience and creativity to develop novel solutions at the cutting edge of space technology. In this role you will be responsible for the manufacturing and quality systems surrounding tight tolerance machined hardware for the satellite RF systems. You will need to develop innovative manufacturing solutions to drive quality, takt time, and yield improvements on challenging timelines.

RESPONSIBILITIES:

• Own product success for precision machined parts with single-digit micron tolerances
• Interface with design engineers and machinists to implement DFM feedback on new and current hardware iterations
• Aggressively implement process improvements to production processes to improve quality and throughput
• Create capital and facility justifications for large projects and process improvements. Own these projects through implementation and activation
• Own and develop quality plans for hardware covering dimensional inspection and functional testing
• Design and fabricate tooling for machining, assembly, and inspection stations

BASIC QUALIFICATIONS:

• Bachelor’s degree in mechanical or aerospace engineering, physics or other engineering discipline
• 1+ years of engineering design experience (internships, student projects, extracurricular project experience, and professional experience qualify)

PREFERRED SKILLS AND EXPERIENCE:

• Experience with Siemens NX and Teamcenter CAD/PDM systems
• Hands on experience milling, turning, and/or CMM inspection
• Practical and programming experience with high precision metrology including CMM, Profilometer, interferometer, etc.
• Strong demonstrable experience using GD&T
• Basic understanding of industrial electrical, control, and instrumentation systems
• Experience working effectively across multi-disciplinary teams
• Desire to work in a fast-paced environment
• Basic proficiency with Python or other programming language
• Experience with full part life cycle from design through verification and production
• Demonstrated experience working in a high-rate production environment

ADDITIONAL REQUIREMENTS:

• Must be able to work extended hours and/or weekends as needed
• Some travel required (up to 10%)
• Ability to pass Air Force background checks for Cape Canaveral and Vandenberg

COMPENSATION AND BENEFITS:                          

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year.

DIAMOND TURNING MACHINIST (STARLINK) - LEVEL 4/5

As a Diamond Turning Machinist on the Diamond Turning team, you will be responsible for the manufacturing and development of sub-micron level tolerance diamond turned parts at production volumes. This is a unique and challenging opportunity to use world class equipment, learn/expand a diamond turning skillset, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot, and to continue to push the boundaries of what is possible to machine.  

RESPONSIBILITIES: 

• Collaborate with engineering to develop new diamond-turned products and processes 
• Continuously improve production process to maximize throughput, improve yield, and improve process up time 
• Responsible for maintaining maximum machine up time by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices 
• Responsible for following defined work instructions, process controls and maintaining a safe work environment  
• Responsible for using metrology including CMM’s, optical microscopes and Zygo interferometers 
• Responsible for changing tools and tooling, following defined processes 
• Responsible for data entry, work tracking and effective communication 

BASIC QUALIFICATIONS: 

• High school diploma or equivalency certificate 
• 3+ years of experience operating diamond turning lathes 
• Experience using GD&T producing precision optics 

PREFERRED SKILLS AND EXPERIENCE: 

• 5+ years operating diamond turning lathes 
• Experience developing and producing new diamond turned products 
• Experience using Nanocam or similar software 
• Ability to independently troubleshoot off-nominal issues related to diamond turning and precision optics manufacturing 

​ADDITIONAL REQUIREMENTS: 

• Must be available for 10 hour shifts. Estimated shift times: 1st shift (6:00AM-4:30PM), 2nd shift (4:00PM to 2:30AM)
• Ability to work all shifts, overtime and weekends as needed 
• Ability to lift up to 25 lbs. unassisted 
• Ability to stand for extended periods - 8 hours min 
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces 
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting 

COMPENSATION AND BENEFITS: 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. 

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

CNC MACHINIST (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 10M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer antennae that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink’s utility for communities and businesses around the globe.

RESPONSIBILITIES:

• Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes
• Responsible for all types of drilling, tapping and milling and turning
• Completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for machining complex, tight tolerances parts and various materials
• Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 3+ years of experience in the setup and operation of CNC machines
• G-code experience

PREFERRED SKILLS AND EXPERIENCE:

• Experience with GD&T or interpreting blueprints/manufacturing drawings
• Short run, prototype, non-production machining experience
• Horizontal Mill experience
• Experience running lathes + live tooling

ADDITIONAL REQUIREMENTS:

• Must be available for 10 hour shifts. Estimated shift times: 1st shift (6:00AM-4:30PM), 2nd shift (4:00PM to 2:30AM)
• Able to lift a minimum of 40lbs. unassisted
• Able to stand for extended periods- 8 hours min
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Pay range:    
CNC Machinist/Level 1: $23.00 - $29.00/hour
CNC Machinist/Level 2: $28.00 - $34.50/hour
CNC Machinist/Level 2: $33.00 - $40.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

TEST TECHNICIAN (STARLINK) 

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented test technicians to support the development and production of optoelectronic devices for Starlink.

RESPONSIBILITIES:

• Responsible for preventative maintenance activities on test equipment and data acquisition systems
• Use mechanical hand tools and torque wrenches to set up parts on test fixtures.
• Support development tests setup and test lab organization efforts.
• Self-monitor work progress against fast-paced area benchmarks and achieve on time delivery of all work.
• Program and operate environmental test chambers and/or vibration shakers.
• Use basic and advanced electronic test equipment and Test Racks/DAQs to run performance tests on parts.
• Assist design engineers with developing and documenting test procedures.
• Interpret a variety of sources ranging from controlled, released documentation to informal sketches.
• Identify design gaps; ask directed questions, and apply skill and experience to resolve them, and update documentation to prevent recurrence.
• Maintain clean, stocked, and orderly work area.
• Work with design engineers to troubleshoot failures of parts and test equipment.
• Assist with the development of production processes for first time production runs.
• Assist with area efficiency and 5S improvement projects.

• Associate or bachelor's degree in a technical or engineering field
• Prior experience with thermal, thermal vacuum, vibration and/or shock testing
• Experience in the aerospace industry, aviation, military or other high-volume operating environment preferred
• Capable of working with diverse electrical test equipment, including analog, digital, optical, and RF
• Basic understanding of networking, including VLANs, namespaces and routing.
• Proficiency with Windows OS and/or Linux
• Excellent attention to detail
• Strong team-work skills

ADDITIONAL REQUIREMENTS:

• Must be willing to work all shifts, overtime and/or weekends as needed.
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
• Must be able to lift to 25 lbs. unassisted

COMPENSATION AND BENEFITS:      

Pay range:     
Test Technician 1: $23.00 - $29.00/hour           
Test Technician 2: $28.00 - $34.50/hour           
Test Technician 3: $33.00 - $40.00/hour    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

SUPERVISOR, PRECISION MACHINING (STARLINK) - 2ND SHIFT

The Starlink Precision Machining team machines and delivers single digit micron tolerance and difficult to source parts at production volumes. The 2nd shift Precision Machining Supervisor will drive a culture of quality while developing exceptional machinists, quality specialists, and technicians. As a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence.

RESPONSIBILITIES:

• Lead and manage a team of technicians, quality specialists, and machinists
• Provide technical guidance and unblock challenging machining issues
• Meet demand requirements to our customers, forecast potential capacity deficiencies, and remove quality/production blockers as they appear
• Manage and optimize machine/labor configuration to meet customer demand
• Regularly drive improvements with operations to improve manufacturability, cycle times, cost, and quality
• Manage schedules, timecards, and direct report performance
• Ensure all processes have accessible and correct documentation
• Set priorities for the team based on strengths and maximizing output; delegate and manage team bandwidth to achieve successful tasks and projects
• Coordinate with leadership to ensure the machine shop’s focus correctly prioritizes projects that are the most impactful to Starlink success
• Think creatively, question the status quo while following documentation and maintaining prescribed quality standards

BASIC QUALIFICATIONS:

• 5+ years of CNC machining experience
• 1+ year of leadership experience in a machine shop setting
• Experience with high-level troubleshooting for machined components

PREFERRED SKILLS AND EXPERIENCE:

• 5+ years leadership experience in a machine shop setting
• Demonstrated experience troubleshooting single digit micron parts
• Advanced macro programming experience
• Experience with Heidenhain controls
• Ability to travel to vendors and assist with solving high-level machining problems
• Programming experience with NX or other similar CAM software
• Precision inspection experience including CMM using PC-DMIS software and hand tools such as micrometers, calipers, profilometers, and interferometers
• Experience with interdisciplinary project management

ADDITIONAL REQUIREMENTS:

• Estimated shift time for 2nd shift: 4:00PM to 2:30AM 
• Travel to vendor sites may be required
• Travel to launch and test sites may be required

COMPENSATION AND BENEFITS: 

LASER PRODUCTION TECHNICIAN (STARLINK)

One of SpaceX's most ambitious missions to date, the Starlink satellite constellation, is our solution for providing reliable internet worldwide. We are looking for talented technicians to help with the full-scale production of Starlink satellites. If you thrive in a fast-paced, dynamic environment, enjoy solving complex problems with high-impact solutions, and love the challenge of building something from scratch, then this role will be an ideal next step in your career.  

RESPONSIBILITIES:

• Build small electrical sub-assemblies by following work instructions precisely to ensure compliance with quality standards.
• Perform optic assembly processes, including epoxy application, UV curing, and oven curing.
• Fiber optic splicing and fiber routing.
• Operate complex automated equipment, including maintenance and some troubleshooting with Engineering guidance.
• Ensure lab equipment is maintained and calibrated, track calibration schedules.
• Work effectively in a clean room environment, strictly adhering to all cleanliness protocols.
• Perform test setups as needed to support developments across several test regimes.
• Manage schedule priorities and independently executing work to meet company deliverables.

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate.
• 1+ years of hands on work experience.

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company.
• Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite.
• Excellent communication and organizational skills.
• Experience setting up and running tests and experiments.
• Associate degree.
• Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists.

ADDITIONAL REQUIREMENTS:

• Willing to work all shifts, overtime and weekends as needed. Estimated shift times 1st shift: 6:00 AM – 4:15 PM; 2nd shift: 4:00 PM – 2:15 AM.
• Standing for long periods of time, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.
• Able to lift up to 25lbs. unassisted.  

COMPENSATION AND BENEFITS:      

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MICROELECTRONICS PROCESS ENGINEER, OPTICAL PRODUCTS (STARLINK)

At SpaceX we are deploying Starlink, the world's most advanced satellite constellation, to provide broadband internet access to the world. We design, build, and operate all parts of the system – from the hardware in customers' homes to the satellites on orbit. Our engineers are endlessly curious, love to learn and try out new things, and work collaboratively across disciplines in a dynamic environment to deliver high-impact technology on a global scale.

As a Microelectronics Process Engineer for Optical Products, you will develop cutting-edge manufacturing processes for next-generation electro-optic devices which are critical to the success our satellite constellation. You will work closely with design teams (electrical/mechanical), software teams, equipment vendors, and production technicians to take products from NPI to high volume manufacturing. This role covers microelectronics manufacturing processes such as die attach, wire-bond, AOI, and active alignment.

RESPONSIBILITIES:

• Manage new product introduction and develop production processes for Micro-E assemblies
• Work with machine vendors to procure, maintain, and improve device manufacturing equipment
• Design and execute DOE to optimize production processes for high volume and high reliability
• Collaborate with design teams and provide design feedback to improve manufacturability and reliability of opto-electronic devices
• Lead investigation on non-conforming hardware to determine root cause and implement reliability improvements
• Work with factory automation teams to bring development processes to high volume production and track product outcomes.
• Identify trends and opportunities for optimizing product output, quality enhancements, and cost of manufacturability
• Drive corrective actions and process improvements on owned processes and products
• Create work instructions, SOPs, and administer training for production technicians

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, mechanical engineering, materials science, physics, or other engineering discipline
• 1+ years of hands-on experience working with microelectronics assembly equipment

PREFERRED SKILLS AND EXPERIENCE:

• Advanced technical degree
• 3+ years of hands-on experience with microelectronics manufacturing processes (die/wire bonding), SMT, or silicon packaging
• Hands-on experience with electro-optical device manufacturing
• High volume production experience (consumer goods, automotive, etc.)
• Hands-on experience working in SMT processing and/or related PCBA processes from industry, research, or academic projects
• Experience with MIL-STD-883, IPC-610 and JEDEC standards relative to micro-electronics
• Experience with environmental testing of electronic devices
• Strong desire and ability to learn quickly, adapt and innovate
• Knowledge of statistical analyses and statistical process control
• Experience with design of experiments (DoE) for process improvements
• Experience with basic failure analysis tools and methods (shear test, pull test, X-ray, cross-section, SAM)
• Excellent communication skills both written and verbal
• Ability to work both autonomously and as a team in a highly demanding, fast-paced environment

ADDITIONAL REQUIREMENTS:

• Ability to life heavy objects, up to 25 Ibs. unassisted
• Willing to work weekend and extended hours as needed

COMPENSATION & BENEFITS:             

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday. 

LEAD TECHNICIAN - STARLINK SATELLITE MECH AND ELECTRONIC PRODUCTION (STARLINK) - 2NDSHIFT

One of the most ambitious missions that SpaceX has undertaken to date, the Starlink satellite constellation, is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help full-scale production of the Starlink satellites. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.

RESPONSIBILITIES:

• Lead satellite production team to achieve daily production targets involving mechanical integration and test execution according to work orders
• Assist with the development of production processes, and identify continuous improvements to reliably achieve production targets
• Build small electrical sub-assemblies
• Mechanical/electrical assembly of satellite components, subassemblies, and integration of final vehicle assemblies
• Mechanical/electrical assembly of PCB assemblies into product chassis
• Build-up battery cell modules
• Build solar modules and solar arrays
• Wire harnessing
• Solder and de-solder through-hole and SMT components
• Support conformal coat, masking, epoxy application and coating
• Run functional testing of built hardware, including setup, instrumentation, test execution, and teardown
• Operate complex automated equipment, including troubleshooting and maintenance
• Support the development of prototype test capabilities for spacecraft component development and life tests
• Assist in the identification, installation and implementation of test equipment, instrumentation and data acquisition systems
• Ensure lab equipment is maintained and calibrated, track calibration schedules
• Responsible for some preventative maintenance activities on test equipment and data acquisition systems
• Identify test equipment requirements for planned tests, maintain test consumables inventory, and develop test procedures and processes accordingly
• Perform test setups as needed to support developments across several test regimes - thermal, shock, thermal vacuum, vibration
• Manage schedule priorities and independently executing work to meet company deliverables

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 6+ months as a SpaceX Technician or 1+ years of experience in an outside aerospace production environment 

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience in electro-mechanical assembly, integration or mechanical assembly experience
• Associate degree
• Airframe and Powerplant (A&P) license
• Demonstrated ability to read, interpret and work from drawings, controlled documentation and processes such as: layout drawings, mechanical drawings, assembly procedures/work instructions; schematics, engineering drawings, and parts list
• Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite
• Excellent communication and organizational skills
• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company
• Experience with electrical wiring
• IPC and/or J-STD certification
• Electro-mechanical assembly and prototype development experience
• Experience setting up and running tests and experiments
• Soldering experience

ADDITIONAL REQUIREMENTS:

• Willing to work all shifts, overtime and weekends as needed. Estimated shift time: 1st Shift: 4:00 PM - 2:15 AM
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Able to lift up to 25lbs. unassisted

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

CNC PROGRAMMER (STARLINK) - LEVEL 4/5

The CNC Programmer role here at SpaceX is expected to have a comprehensive understanding of all CNC machining and programming operations.  This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase productivity and optimize machining programs and procedures. Machine operation, tool and material ordering are all part of this job as well, with a primary focus on programming.

RESPONSIBILITIES:

• Use of NX or MasterCam CAD/CAM/CAE program to program CNC parts
• Vericut NC files as well as maintain revision control on programs and setup sheets
• Cut tools and adjust speed and feed parameters for maximum tool life
• Make or offer suggestions on drawing changes to improve manufacturability
• Keep products moving and alerting management when production is inhibited
• Provide consistent ideas for process improvements
• Mentor motivated machinists with programming knowledge
• Machine parts occasionally to assist the shop floor when machining is backlogged

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate 
• 5+ years of CNC programming experience using NX or MasterCam software

PREFERRED SKILLS AND EXPERIENCE:

• 10+ years of CNC programming experience using NX or MasterCam software
• Experience with programming and operating multi axis mill and lathe CNC machines

ADDITIONAL REQUIREMENTS:

• Must be available for 10-hour shifts. Estimated shift time: (6:00AM-4:30PM),
• Ability to lift 25 lbs. unassisted
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Pay range:          
CNC Programmer/Level 4: $46.50 - $57.00/hour           
CNC Programmer/Level 5: $52.00 - $64.00/hour   

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

LASER PRODUCTION TECHNICIAN (STARLINK)

One of SpaceX's most ambitious missions to date, the Starlink satellite constellation, is our solution for providing reliable internet worldwide. We are looking for talented technicians to help with the full-scale production of Starlink satellites. If you thrive in a fast-paced, dynamic environment, enjoy solving complex problems with high-impact solutions, and love the challenge of building something from scratch, then this role will be an ideal next step in your career.  

RESPONSIBILITIES:

• Build small electrical sub-assemblies by following work instructions precisely to ensure compliance with quality standards.
• Perform optic assembly processes, including epoxy application, UV curing, and oven curing.
• Fiber optic splicing and fiber routing.
• Operate complex automated equipment, including maintenance and some troubleshooting with Engineering guidance.
• Ensure lab equipment is maintained and calibrated, track calibration schedules.
• Work effectively in a clean room environment, strictly adhering to all cleanliness protocols.
• Perform test setups as needed to support developments across several test regimes.
• Manage schedule priorities and independently executing work to meet company deliverables.

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate.
• 1+ years of hands on work experience.

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company.
• Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite.
• Excellent communication and organizational skills.
• Experience setting up and running tests and experiments.
• Associate degree.
• Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists.

ADDITIONAL REQUIREMENTS:

• Willing to work all shifts, overtime and weekends as needed. Estimated shift times 1st shift: 6:00 AM – 4:15 PM; 2nd shift: 4:00 PM – 2:15 AM.
• Standing for long periods of time, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.
• Able to lift up to 25lbs. unassisted.  

COMPENSATION AND BENEFITS:      

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MANUFACTURING SPECIALIST (OPTICAL PRODUCTION)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. The ultimate goal of the team is to deliver the optical assemblies required for our satellites to achieve their mission. 

RESPONSIBILITIES:

• Execute and manage new configuration introduction into production area
• Perform process development and validation on new designs in extremely aggressive timelines
• First-level triage of test failures by reading and interpreting test logs and telemetry
• Assess non-conforming hardware and drive resolution and preventative actions
• Design and implement assembly fixtures/shop aides to improve manufacturing process
• Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost
• Implement standard practices, troubleshooting guides, and standard repair procedures
• Identify, develop, and provide training to production technicians on new or updated processes
• Create and support equipment maintenance and calibration schedules

BASIC QUALIFICATIONS: 

• High school diploma or equivalency certificate
• 2+ years professional experience in a hands-on manufacturing environment or a bachelor’s degree in an engineering, math, or science discipline 

PREFERRED SKILLS AND EXPERIENCE:

• Associate or Bachelor’s degree in an engineering, math or science discipline
• Experience as a Lead Technician working on assembly and/or test of sub-assemblies
• Ability to read, understand and follow detailed schematics, drawings, and instructions
• Experience with Microsoft Office (Excel, Word, Power Point, Outlook)
• Able to adapt to constant changing work assignments and fast paced work environment
• Excellent communication (written and verbal) and teamwork skills
• Excellent concentration and attention to detail with outstanding work efficiency and accuracy

ADDITIONAL REQUIREMENTS:

• Available to work extended hours and weekends as needed. Estimated shift time: 7AM-5:30PM
• Must be able to stand for long periods of time
• Must be able to lift up to 25 pounds unassisted
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

LASER PRODUCTION TECHNICIAN (STARLINK)

One of SpaceX's most ambitious missions to date, the Starlink satellite constellation, is our solution for providing reliable internet worldwide. We are looking for talented technicians to help with the full-scale production of Starlink satellites. If you thrive in a fast-paced, dynamic environment, enjoy solving complex problems with high-impact solutions, and love the challenge of building something from scratch, then this role will be an ideal next step in your career.  

RESPONSIBILITIES:

• Build small electrical sub-assemblies by following work instructions precisely to ensure compliance with quality standards.
• Perform optic assembly processes, including epoxy application, UV curing, and oven curing.
• Fiber optic splicing and fiber routing.
• Operate complex automated equipment, including maintenance and some troubleshooting with Engineering guidance.
• Ensure lab equipment is maintained and calibrated, track calibration schedules.
• Work effectively in a clean room environment, strictly adhering to all cleanliness protocols.
• Perform test setups as needed to support developments across several test regimes.
• Manage schedule priorities and independently executing work to meet company deliverables.

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate.
• 1+ years of hands on work experience.

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company.
• Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite.
• Excellent communication and organizational skills.
• Experience setting up and running tests and experiments.
• Associate degree.
• Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists.

ADDITIONAL REQUIREMENTS:

• Willing to work all shifts, overtime and weekends as needed. Estimated shift times 2nd shift: 4:00 PM – 2:15 AM.
• Standing for long periods of time, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.
• Able to lift up to 25lbs. unassisted.  

COMPENSATION AND BENEFITS:      

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

TEST SPECIALIST (STARLINK) 

Have a knack for enabling timely results in complex situations? Does the thought of working on and helping the development for the on-time execution of complex, multi-disciplinary teams sound rewarding? What if the results were the rapid development and demonstration of unprecedented Space Laser hardware capabilities? SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites. Join the team responsible for systems enabling the rapid development that is critical to the success of Starlink. Specializing in test and infrastructure, you are responsible for helping develop, deploy, support, and maintain solutions for fast and accurate integration testing.

RESPONSIBILITIES:

• Ensure optical test systems and areas are operating properly.
• First level triage of test failures by reading and interpreting test logs and telemetry
• Build and validate automated hardware test systems for a production environment.
• Fabricate and repair cable harnesses including: crimping, soldering and assembling connectors.
• Design and implement assembly fixtures/shop aides to improve manufacturing and test processes.
• Identify, develop, and provide training to production technicians on new or updated test processes.
• Create and support equipment maintenance and calibration schedules.
• Manage workload to prioritize tasks, meet deadlines, and respond to critical requests.
• Interpret a variety of sources ranging from controlled, released documentation to informal sketches.
• Identify design gaps; ask directed questions, and apply skill and experience to resolve them, and update documentation to prevent recurrence.
• Maintain an organized, clean, and safe work environment.

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 2+ years of professional experience in a hands-on manufacturing environment OR a bachelor's degree in an engineering, math or science discipline

PREFERRED SKILLS AND EXPERIENCE:

• AS or BS degree in a technical or engineering field
• Proficient with standard computer software (Excel, Word, Power Point, Outlook) and some experience with CAD software (NX, TeamCenter) and programming (Python, C++)
• Experience with production and environmental (thermal, thermal vacuum, HASS) testing for electronic assemblies.
• Experience working and administering a Linux environment.
• Basic understanding of networking, including VLANs, namespaces and routing.
• Developed and deployed software that has been used in real world projects (Python preferred).
• Ability to read, understand, and follow detailed schematics, engineering drawings, and instructions.
• Excellent communication (written and verbal) and teamwork skills.
• Strong desire and ability to learn quickly, adapt, and innovate.
• Ability to work both autonomously and as a team in a highly demanding, fast-paced environment.
• Positive attitude and experience working on a cross-functional team.
• Willingness to provide constructive feedback to the engineering and production teams to improve tooling designs, processes, and parts.

ADDITIONAL REQUIREMENTS:

• Available to work extended hours and weekends as needed. This role will be covering 1st shift (typical start time is 7 am)
• Must be able to stand for long periods of time
• Must be able to lift up to 25 pounds unassisted
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

PRODUCTION MACHINIST (STARLINK) - 2ND SHIFT 

As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn diamond turning, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot, and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes
• Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices
• Responsible for troubleshooting
• Responsible for completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for working with complex, tight tolerance parts and various materials

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 6+ months working in a production environment
• 6+ months experience handling or working with machined hardware

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of machining experience
• Experience using pallet systems and cells
• Experience with micron level tolerance parts and how to handle/inspect them
• Experience working with aluminum and copper

ADDITIONAL REQUIREMENTS:

• Must be available to work all shifts, overtime, and weekends as needed. Estimated shift time: 2nd shift (4:00 PM to 2:30 AM)
• Must be available for 10 hour shifts
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

CNC MACHINIST (STARLINK) – LEVEL 4/5

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 10M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer antennae that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink’s utility for communities and businesses around the globe.

RESPONSIBILITIES:

• Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes
• Responsible for all types of drilling, tapping and milling and turning
• Completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for machining complex, tight tolerances parts and various materials
• Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 7+ years of experience in the setup and operation of CNC machines
• G-code experience

PREFERRED SKILLS AND EXPERIENCE:

• 10+ years of experience in the setup and operation of CNC machines
• Experience with GD&T or interpreting blueprints/manufacturing drawings
• Short run, prototype, non-production machining experience
• Horizontal mill experience
• Basic programming experience
• Experience running lathes + live tooling

ADDITIONAL REQUIREMENTS:

• Must be available for 10 hour shifts. Estimated shift times: 1st shift (6:00AM-4:30PM), 2nd shift (4:00PM to 2:30AM)
• Able to lift a minimum of 40lbs. unassisted
• Able to stand for extended periods- 8 hours min
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
• Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Pay range:    
CNC Machinist/Level 4: $38.00 - $45.00/hour    
CNC Machinist/Level 5: $43.00 - $52.00/hour    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

SOFTWARE ENGINEER, HARDWARE TEST & AUTOMATION (OPTICAL PAYLOADS)

As a Software Engineer on the Starlink Integration & Test Team, your focus will be on developing integrated operations and automation for complex subassemblies and components that bring the Starlink Satellite to life. You will be responsible for systems that enable rapid development and accurate testing of Starlink software and hardware, with a continual focus on design, development, and building innovative test systems, from hardware designs to software infrastructure. Our engineers serve as software and hardware experts for the flight control devices and mechanisms that drive the critical capabilities on our satellites - from attitude determination/control systems to Space Lasers and more. We design software and build systems that test flight components for maximum performance and reliability in extreme environments, with mission success being imperative.

Aerospace experience is not required to be successful here – engineers on this team are curious, and collaborative, love to learn new things, and work effectively in a dynamic environment to deliver high-impact technology on a massive scale.

RESPONSIBILITIES:

• Develop modular, reusable test and automation software in Python and similar languages for manufacturing and engineering design verification
• Write automation software to interact with flight hardware, test equipment, instrumentation, and production documentation systems
• Develop software that allows test execution across multiple environments: hardware-in-the-loop (HITL, HIL) and virtualized hardware simulations
• Develop custom automation solutions to engineering and manufacturing challenges using a combination of embedded electronics and innovative hardware
• Develop algorithms to analyze complex test data to determine if components have met acceptance criteria
• Maintain and troubleshoot existing automation infrastructure and work with partner teams to determine and correct root cause of failures
• Define and implement project plans, manage milestones and hold reviews to ensure reliable test systems are delivered to production
• Invent tools that enable more frequent and reliable software deployment, test execution, and data analysis as part of a continuous integration and release system

BASIC QUALIFICATIONS:

• Bachelor's degree in computer science, engineering, math, or STEM discipline; OR 2+ years of professional experience in software development in lieu of a degree
• Development experience in C, C++, or Python

PREFERRED SKILLS AND EXPERIENCE:

• Extensive knowledge of Linux/Windows operating systems, computer architecture and networks
• Experience troubleshooting interactions between software and hardware such as network devices and lab instrumentation
• Experience developing application, test, or automation software in an interdisciplinary production environment
• Experience with numerical analysis techniques and signal processing in multiple domains
• Experience with configuration management, version control software, continuous integration, and agile development
• Extensive knowledge with a range of digital and analog interfaces including GPIB, USB, VISA, TCP/IP, VLAN, CAN bus, SPI, I2C, Modbus, and analog-to-digital conversion
• Cross-context test design skills, ranging from simple unit tests to integrated hardware-in-the-loop regression and exploratory tests
• Experience working with spacecraft, automotive, or other industrial hardware, such as high-powered electro-mechanical systems and ground-support equipment
• Ability to work in a dynamic environment independently or in a team, take initiative, and communicate effectively in a solution-oriented manner
• Solid fundamental knowledge of networks, electronics, RF communications, optics, math, and physics

ADDITIONAL REQUIREMENTS:

• Willing to work extended hours and weekends when needed

COMPENSATION AND BENEFITS:

PRODUCTION MACHINIST (STARLINK) - 1ST SHIFT 

As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn diamond turning, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot, and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes
• Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices
• Responsible for troubleshooting
• Responsible for completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for working with complex, tight tolerance parts and various materials

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 6+ months working in a production environment
• 6+ months experience handling or working with machined hardware

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of machining experience
• Experience using pallet systems and cells
• Experience with micron level tolerance parts and how to handle/inspect them
• Experience working with aluminum and copper

ADDITIONAL REQUIREMENTS:

• Must be available to work all shifts, overtime, and weekends as needed. Estimated shift time: 1st shift (6:00 AM to 4:30 PM) 
• Must be available for 10 hour shifts
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

DIAMOND TURNING TECHNICIAN (STARLINK)

As Diamond Turning Technician on the Diamond Turning team, you will be responsible for producing sub-micron level tolerance diamond turned parts and assemblies at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn/expand a diamond turning skillset, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot, and to continue to push the boundaries of what is possible to manufacture 

RESPONSIBILITIES: 

• Follow defined work instructions, process controls and maintain a safe work environment  
• Maintain maximum machine/work center up time by identifying and reporting off nominal issues such as alarms, out of tolerance conditions, and actively maintaining best practices 
• Use metrology equipment including CMM’s, optical microscopes and Zygo interferometers 
• Data entry, work tracking and effective communication 

BASIC QUALIFICATIONS: 

• High school diploma or equivalency certificate 
• 1+ years of professional work experience using precision hand tools or equipment (torque tools, precision metrology instruments, precision testing equipment)  

PREFERRED SKILLS AND EXPERIENCE: 

• Experience with sub-micron tolerance parts and how to handle/inspect them 
• CNC lathe experience 
• Understanding of optics manufacturing and associated metrology 
• 2+ years of experience in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company 

​ADDITIONAL REQUIREMENTS: 

• Must be available for 10 hour shifts. Estimated shift times: 1st shift (6:00AM-4:30PM), 2nd shift (4:00PM to 2:30AM)
• Ability to work all shifts, overtime and weekends as needed 
• Ability to lift up to 25 lbs. unassisted 
• Ability to stand for extended periods - 8 hours min 
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces 
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting 

COMPENSATION AND BENEFITS: 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MECHANICAL ENGINEER, SPACE LASERS MANUFACTURING (STARLINK)

Engineers on this team must have a working knowledge of design, manufacturing, testing, and flight. A successful mechanical engineer demonstrates engineering intuition and critical thinking and is comfortable working under ambiguous requirements with minimal oversight. Combining these skills, these engineers face challenges across a wide variety of products and subassemblies, and the team is frequently asked to tackle new, inter-departmental development projects. The ultimate goal of the team is to deliver the optical assemblies required for our satellites to achieve their mission.

RESPONSIBILITIES:

• Manage integration build flow and test operations
• Evaluate proposed designs for manufacturability and integration
• Interface with both engineers and technicians to optimize manufacturing and automation
• Develop and refine manufacturing assembly procedures based on lessons learned
• Enable day-to-day execution of product integration and test flow
• Evaluate non-conformances to determine root cause and create actionable items and system improvements
• Work with upstream and downstream partner teams to drive improvements at the system level

BASIC QUALIFICATIONS:

• Bachelor's degree in mechanical engineering or other engineering discipline
• 1+ years of professional mechanical design or hands-on manufacturing experience (internships/co-ops and club projects can apply)

PREFERRED SKILLS AND EXPERIENCE:

• Master's degree in mechanical engineering or other engineering discipline
• Experience with integration and testing of optical, mechanical, propulsion, thermal, electrical, and/or structural systems
• Documentation and configuration management experience
• Experience writing test plans and procedures and providing go/no-go judgment and rationale
• Experience in a production environment
• Demonstrated engineering intuition, critical thinking, and comfort with ambiguity

ADDITIONAL REQUIREMENTS:

• Some travel to our launch sites may be required as needed, up to 10%
• Must be willing to work extended hours and/or weekends as needed

COMPENSATION AND BENEFITS:                          

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

PRODUCTION MACHINIST (STARLINK) - 2ND SHIFT - LEVEL 4/5

As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn diamond turning, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes
• Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices
• Responsible for troubleshooting
• Responsible for completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for working with complex, tight tolerance parts and various materials

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes
• Experience working in production machining cells
• Experience machining parts

PREFERRED SKILLS AND EXPERIENCE:

• 5+ years of horizontal mill setup experience
• 5+ years of vertical mill setup experience
• Experience using pallet systems and cells
• 1+ years of CNC programming experience using NX
• Diamond turning experience
• Experience with micron level tolerance parts and how to handle/inspect them
• Experience working with aluminum and copper

​ADDITIONAL REQUIREMENTS:

• Must be available to work all shifts, overtime and weekends as needed. Estimated shift time; 2nd shift (4:00 PM to 2:30 AM)
• Must be available for 10 hour shifts
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

ULTRA PRECISION MACHINING SPECIALIST (MACHINING) - LEVEL 4/5 

As an Ultra Precision Machining Specialist, you will be responsible for developing precision machining cells to produce single-digit micron parts and production volumes. This is a unique and challenging opportunity to use world class equipment, fully utilize your technical skillset and experience, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for scoping, developing, executing and automating precision machining processes using 3/4/5 axis mills, multi-axis turning centers and pallet systems   
• Designing tooling, CAM programming, and working with machinists to prove out and bring up new product lines on tight timelines
• Proactively identify and address potential development/production blockers
• Bring development projects into production through defining and communicating manufacturing processes to production/engineering
• Responsible for maintaining and troubleshooting defined processes while in production

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 5+ years experience independently developing machining processes (planning, programming, machining)
• 5+ years experience using CNC mills and lathes
• 3+ years developing machining processes using automation (pallet pools, robot loaders, etc.)
• Basic understanding of GD&T and how it applies to the machined product
• Ability to interpret CMM results and apply them to the machined product

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor’s degree in mechanical, aerospace, or materials engineering
• 15+ years experience independently developing machining processes on 5 axis mills and multi-task turning centers (planning, programming, machining)
• Experience bringing single digit micron tolerance machined part processes into production
• Experience creating clear manufacturing process proposals (cycle time estimates, tooling design, part flow)
• Demonstrated “exceptional” machining ability

​ADDITIONAL REQUIREMENTS:

• Must be available for 10 hour shifts
• Ability to work all shifts, overtime and weekends as needed
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

MANUFACTURING SPECIALIST (SATELLITE TRANSCEIVER)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for a talented manufacturing specialist to support production of optoelectronic devices for Starlink.

RESPONSIBILITIES:

• Execute and manage new configuration introduction into production on aggressive timelines
• Identify, develop, and provide training for production technicians on new or updated processes
• Program and operate microelectronics assembly machines (die/wire bonding machines)
• Train technicians to run/troubleshoot complex machines
• Create and support equipment maintenance and calibration schedules
• Execute Design of Experiments (DOE) for iterative process improvement
• Design and implement assembly fixtures / shop aids to improve manufacturing processes
• Specify equipment requirements for new PCBA build processes
• Implement standard practices, troubleshooting guides, and standard repair procedures
• Assess non-conforming hardware and drive resolution and preventative actions
• First level triage of production yield issues and other hardware failures
• Collaborate with manufacturing, test, and design teams on design for manufacturing
• Improve manufacturing systems to ensure rate capability

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 2+ years professional experience in a hands-on manufacturing environment or a bachelor’s degree in an engineering, math, or science discipline

PREFFERED SKILLS AND EXPERIENCE:

• Associate or bachelor’s degree in an engineering, math, or science discipline
• Hands-on experience with microelectronics manufacturing processes (die/wire bonding), SMT, or silicon packaging
• Experience with MIL-STD-883 test methods and procedures
• Ability to read, understand, and follow detailed schematics, engineering drawings, and instructions
• Excellent communication (written and verbal) and teamwork skills
• Strong desire and ability to learn quickly, adapt, and innovate
• Ability to work both autonomously and as a team in a highly demanding, fast-paced environment

ADDITIONAL REQUIREMENTS:

• Available to work extended hours and weekends as needed. Estimated shift time: 7AM-5:30PM
• Must be able to stand for long periods of time
• Must be able to lift up to 25 pounds unassisted
• Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

CMM PROGRAMMER (STARLINK) - 2ND SHIFT

The CMM Programmer role here at SpaceX is expected to have a comprehensive understanding of CMM programming, GD&T, operations and reporting. This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area. 

RESPONSIBILITIES:

• Perform precision inspection (CMM or surface plate) verification on mechanical parts, components, assemblies and materials. May include, but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications/drawings.
• Understand GD&T requirements as applied to the engineering drawing and drawing notes.
• Spot interpretation issues as applied to dimensions written or evaluation to requirements
• Select and utilize standard gauges to ensure quality. Inspect feature tolerances by selecting the tool with the required accuracy
• Candidate will be responsible for working in a cross-functional environment utilizing CMM programming software in conjunction with bridge-style machines up to possible 5axis head motion.
• Create, maintain, verify, retain, sort and organize all programs created to ensure they are readily available and saved to the current revision (in close coordination with Quality Assurance supervision)
• Work with cross functional teams to continuously improve the processes and specifications that govern precision inspection within the work center and beyond
• Assist engineering with making part inspection plans
• Identify engineering, design, GD&T issues and errors creating ambiguity in the manufacturing and inspection process.
• Make or offer suggestions on drawing changes to improve manufacturability
• Assist engineering and management research and procure tools (from gauges to CMM machines themselves)
• Create and administer training. Help others around them to exceed the expectations of their job

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 3+ years of CMM programming experience

PREFERRED SKILLS AND EXPERIENCE:

• 5+ years CMM experience, including programming on multi-sensing CMMs (vision, laser, touch probe, etc.)
• Ability to read and understand GD&T and all drawing criteria, notes and tolerances
• Ability to assist with designing/developing quality gauging to improve efficiency
• Understands and adheres to ISO 9001
• Experience with set-up of CMM and Romer Arm (or other portable non-DCC arm)
• Understands what tool is required to complete the job at hand

ADDITIONAL REQUIREMENTS:

• Willing to work shift hours: 3:00PM to 1:30AM PT
• Ability to lift 25 lbs. unassisted
• Ability to lift, stand, climb, bend, grasp, sit, pull, push, stoop, stretch, and carry are generally required to perform the functions of this position
• Able to use hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting
• Must be willing to work in a cleanroom environment, which requires PPE, such as: bunny suit, hair net, beard net, etc.

COMPENSATION AND BENEFITS:

Pay range:    
CMM Programmer/Level 1: $34.00 - $40.00/hour
CMM Programmer/Level 2: $38.00 - $45.00/hour
CMM Programmer/Level 3: $42.00 - $51.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

MANUFACTURING ENGINEER, OPTICAL FIBER (STARLINK)

At SpaceX we are deploying Starlink, the world's most advanced satellite constellation, to provide broadband internet access to the world. We design, build, and operate all parts of the system – from the hardware in customers' homes to the satellites on orbit. Our engineers are endlessly curious, love to learn and try out new things, and work collaboratively across disciplines in a dynamic environment with changing needs as we strive to deliver high-impact technology on a global scale.

As a Manufacturing Engineer for Optical Fiber, you will develop manufacturing and test processes for optical fiber assemblies. You will work closely with design teams, integration and test teams, and suppliers to bring products from NPI to high-volume manufacturing. Additionally, you will be responsible for developing manufacturing and test procedures with the intent of improving optical fiber reliability.

RESPONSIBILITIES:

• Manage new product introduction and develop production processes for optical fiber assemblies
• Design and implement development and production test procedures for optical fiber assemblies to improve reliability
• Work with manufacturers and suppliers to implement process improvements to improve optical fiber reliability
• Drive corrective actions and process improvements on owned processes and products
• Lead investigation on non-conforming hardware to determine root cause and implement reliability improvements
• Collaborate with design teams and provide design feedback to improve manufacturability and reliability
• Identify trends and opportunities for optimizing product output, quality enhancements, and cost of manufacturability

BASIC QUALIFICATIONS:

• Bachelor’s degree in mechanical engineering, materials science, physics, or other engineering discipline
• 1+ years of professional mechanical/electromechanical design, analysis, testing, and/or manufacturing (internships/co-ops and club projects can apply)

PREFERRED SKILLS AND EXPERIENCE:

• Advanced technical degree
• 3+ years of hands-on experience with manufacturing optical fiber assemblies
• Hands-on experience with optical fiber testing (insertion loss, return loss, etc.)
• Knowledge of various fiber technologies (single mode, multi-mode, polarization maintaining etc.)
• Knowledge of optical fiber harness manufacturing and processing techniques (splicing, cleaving, crimping etc.)
• High volume production experience (consumer goods, automotive, etc.)
• Knowledge of various optical fiber classes and standards (OM3, OM4, graded index etc.)
• Experience with environmental testing of optical assemblies
• Strong desire and ability to learn quickly, adapt and innovate
• Knowledge of statistical analyses and statistical process control
• Excellent communication skills both written and verbal
• Ability to work both autonomously and as a team in a highly demanding, fast-paced environment

ADDITIONAL REQUIREMENTS:

• Some travel to our launch sites may be required as needed, up to 10%
• Must be willing to work extended hours and/or weekends as needed

SR. MECHANICAL ENGINEER, OPTICAL PRODUCTION (STARLINK)

Engineers on this team must have a working knowledge of design, manufacturing, testing, and flight. A successful mechanical engineer demonstrates engineering intuition and critical thinking and is comfortable working under ambiguous requirements with minimal oversight. Combining these skills, these engineers face challenges across a wide variety of products and subassemblies, and the team is frequently asked to tackle new, inter-departmental development projects. The ultimate goal of the team is to deliver the optical assemblies required for our satellites to achieve their mission.

RESPONSIBILITIES:

• Manage integration build flow and test operations
• Evaluate proposed designs for manufacturability and integration
• Interface with both engineers and technicians to optimize manufacturing and automation
• Develop and refine manufacturing assembly procedures based on lessons learned
• Enable day-to-day execution of product integration and test flow
• Evaluate non-conformances to determine root cause and create actionable items and system improvements
• Work with upstream and downstream partner teams to drive improvements at the system level

BASIC QUALIFICATIONS:

• Bachelor's degree in mechanical engineering or other engineering discipline
• 5+ years of professional mechanical design or hands-on manufacturing experience

PREFERRED SKILLS AND EXPERIENCE:

• Master's degree in mechanical engineering or other engineering discipline
• Experience with integration and testing of optical, mechanical, propulsion, thermal, electrical, and/or structural systems
• Documentation and configuration management experience
• Experience writing test plans and procedures and providing go/no-go judgment and rationale
• Experience in a production environment
• Demonstrated engineering intuition, critical thinking, and comfort with ambiguity

ADDITIONAL REQUIREMENTS:

• Some travel to our launch sites may be required as needed, up to 10%
• Must be willing to work extended hours and/or weekends as needed

COMPENSATION AND BENEFITS:                          

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year.

PRODUCTION MACHINIST (STARLINK) - 1ST SHIFT - LEVEL 4/5

As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn diamond turning, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes
• Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices
• Responsible for troubleshooting
• Responsible for completing machining operations from blueprints, drawings and/or verbal instructions
• Responsible for working with complex, tight tolerance parts and various materials

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes
• Experience working in production machining cells
• Experience machining parts

PREFERRED SKILLS AND EXPERIENCE:

• 5+ years of horizontal mill setup experience
• 5+ years of vertical mill setup experience
• Experience using pallet systems and cells
• 1+ years of CNC programming experience using NX
• Diamond turning experience
• Experience with micron level tolerance parts and how to handle/inspect them
• Experience working with aluminum and copper

​ADDITIONAL REQUIREMENTS:

• Must be available to work all shifts, overtime, and weekends as needed. Estimated shift time; 1st shift (6:00 AM to 4:30 PM) 
• Must be available for 10 hour shifts
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Non-exempt Washington employees are eligible for sick leave in accordance with Washington's Sick Leave policies.

HARDWARE DEVELOPMENT ENGINEER, TRANSCEIVERS (STARLINK)

At SpaceX we are deploying Starlink, the world's most advanced satellite constellation, to provide broadband internet access to the world. We design, build, and operate all parts of the system – from the hardware in customers' homes to the satellites on orbit. Our engineers are endlessly curious, love to learn, and try out new things. We work collaboratively in a dynamic environment to deliver high-impact technology on a global scale.

As a Hardware Development Engineer for transceivers, you will develop microelectronic failure analysis tools, work with the design and integration teams to develop process and design improvements, and drive corrective actions for improving transceiver reliability. This role encompasses reliability testing of microelectronic devices, failure analysis, statistical process analysis, and collaborating with cross-functional teams to implement reliability improvements from a holistic perspective.

RESPONSIBILITIES:

• Own the overall yield and reliability of transceivers from early production through on-orbit operation
• Interface with adjacent teams to drive reliability improvements for transceivers at all levels
• Develop design, manufacturing, and test requirements for improved reliability of transceiver products
• Scope and procure equipment for testing and analysis of microelectronic assemblies
• Develop standard failure analysis tools and best practices for non-conforming microelectronic devices
• Drive corrective actions and process improvements for transceiver manufacturing (die attach, wire bond, SMT etc.)
• Lead investigation on non-conforming hardware to determine root cause and implement reliability improvements
• Collaborate with design teams and provide design feedback to improve manufacturability and reliability
• Identify trends and opportunities for optimizing product output, quality enhancements, and cost of manufacturability

BASIC QUALIFICATIONS:

• Bachelor’s degree in mechanical engineering, electrical engineering, materials science, physics, or other engineering discipline
• 1+ years of hands-on experience working in microelectronics manufacturing

PREFERRED SKILLS AND EXPERIENCE:

• Advanced technical degree
• 3+ years of experience with manufacturing and testing microelectronics assemblies
• Hands on experience with basic failure analysis tools and methods (shear test, pull test, X-ray, cross-section, SAM)
• Experience with design of experiments (DoE) for process improvements
• Experience with microelectronics manufacturing methods (die attach, wire bond etc.)
• Hands-on experience working in SMT processing and/or related PCBA processes from industry, research, or academic projects
• Experience with MIL-STD-883, IPC-610 and JEDEC standards relative to micro-electronics
• Experience with environmental testing of electronic devices
• Knowledge of statistical analyses and statistical process control
• High volume production experience (consumer goods, automotive, etc.)
• Strong desire and ability to learn quickly, adapt and innovate
• Knowledge of statistical analyses and statistical process control
• Excellent communication skills, both written and verbal
• Ability to work both autonomously and as a team in a highly demanding, fast-paced environment

ADDITIONAL REQUIREMENTS:

• Willing to work weekends and extended hours as needed
• Ability to life heavy objects, up to 25 Ibs. unassisted

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

DIAMOND TURNING MACHINIST (STARLINK)

As a diamond turning machinist, you will be responsible for the manufacturing and development of sub-micron level tolerance diamond turned parts at production volumes. This is a unique and challenging opportunity to use world-class equipment, learn/expand a diamond turning skillset, and work with some of the best and brightest in their fields. The scope of this team is to make the parts that other companies cannot, and to continue to push the boundaries of what is possible to machine.

RESPONSIBILITIES:

• Responsible for following defined work instructions, process controls, and maintaining a safe work environment
• Responsible for maintaining maximum machine/work center up time by identifying and reporting off nominal issues such as alarms, out of tolerance conditions, and actively maintaining best practices
• Responsible for using metrology including CMM’s, optical microscopes, and Zygo interferometers
• Responsible for changing tools and tooling following defined processes
• Responsible for data entry, work tracking, and effective communication

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 6+ months experience operating CNC machines

PREFERRED SKILLS AND EXPERIENCE:

• Experience running diamond turning lathes
• Experience with sub-micron tolerance parts and how to handle/inspect them
• CNC Lathe setup experience
• Understanding of optics manufacturing and associated metrology
• Ability to provide feedback and suggest process improvements to production and engineering

ADDITIONAL REQUIREMENTS:

• Must be available for 10 hour shifts. Estimated shift times: 1st shift (6:00AM-4:30PM), 2nd shift (4:00PM to 2:30AM)
• Ability to work all shifts, overtime and weekends as needed
• Ability to lift up to 25 lbs. unassisted
• Ability to stand for extended periods - 8 hours min
• Ability to stoop, bend, crawl, and being able to maneuver in tight spaces
• Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.