SR. MECHANICAL DESIGN ENGINEER, GATEWAYS (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, ground station gateways, and consumer antennae that allow users to connect within minutes of unboxing. We’ve only begun to scratch the surface of Starlink’s potential global impact, and we are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites – they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. As a mechanical engineer on gateways, you will holistically own complex hardware and system design for these ground stations. The mechanical team is responsible for the design of everything from cutting-edge composites and manufacturing technology, state-of-the-art RF vacuum electronics, to high-precision pointing and actuation systems. The role encompasses design, analysis, and hands-on manufacturing disciplines, with the ability to spearhead change at the inception of product development, through production, deployment, and operations. Come join this high-performing team in designing and building out the world’s largest network of ground stations!

RESPONSIBILITIES:

• Own hardware from conceptual design through high-volume production and ground station deployment and operation
• Rapidly iterate on designs, analysis, and test to inform high-level system trades and steer overall product direction
• Develop design criteria, collaborate on requirements, and drive system-level optimization
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line
• Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria
• Demonstrate extreme ownership of product outcomes at every stage of development and production 
• Work with partner teams to develop novel manufacturing procedures

BASIC QUALIFICATIONS:

• Bachelor's degree in an engineering discipline
• 5+ years of experience designing, building, and testing hardware 
• Experience with CAD and/or finite element analysis (FEA) software packages

PREFERRED SKILLS AND EXPERIENCE:

• Experience designing and testing RF or antenna hardware
• Experience with fast-paced hardware development for high-reliability applications
• Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design
• Knowledge and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components
• Ability to assess risk and make design and development decisions without all available data
• Self-motivated with strong organizational, written, and oral communication skills
• Able to communicate complex concepts, problems, and solutions clearly and effectively to all levels within the organization

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

SR. ELECTRICAL TEST AND RELIABILITY ENGINEER, GATEWAYS (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation that provides fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, hundreds of gateway ground stations, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

As a Sr. Electrical Test and Reliability Engineer on Starlink, you’ll contribute to the design, build, and test electronics for the world's largest network of ground stations, which function as an intermediary between the satellites and our end-users to ensure smooth data transfer and transmission. You will sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our ground antenna hardware can withstand the harshest environmental conditions while maintaining reliable communication with millions of users on a global scale. This is an opportunity to work on cutting edge R&D technology, and some of the most complex applications of electrical and mechanical engineering in the industry.

RESPONSIBILITIES:

• Design, develop, and execute novel environmental, RF, mechanical, and electrical test solutions for our ground antenna electronics and payload
• Perform detailed failure analysis of ground antenna hardware, identifying root causes of failures and implementing corrective actions
• Select commercial-off-the-shelf hardware and/or design custom PCBAs to measure signals, apply flight-like loads, and power units under test
• Hands-on support of hardware through design qualification, production ramp, and ground network rollout
• Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design) to deliver tightly integrated, high-performance hardware
• Perform electrical bench testing of failures to replicate and inform mitigation of anomalies
• Drive continual improvements to our designs by building physical and digital tools to analyze data collected both in the field and in the lab
• Challenge assumptions and work to find simple solutions to complex problems

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• 5+ years of experience in hardware development, failure analysis, or reliability engineering 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• Experience with both electronics and mechanical design and analysis including knowledge of RF principles
• Experience analyzing circuits and PCBAs, and developing functional test plans
• Experience with test equipment and measurement techniques to verify and validate product requirements (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.)
• Experience in environmental testing such as HALT/HASS, thermal, humidity, shock & vibration
• Strong understanding of computers and programming languages (Python, C/C++)
• Thorough understanding of electronics reliability, manufacturing, and failure mechanisms
• Knowledge of quality tools such as Lean principles, Six Sigma, and root cause analysis methods
• Thorough understanding of metrology, sources of measurement error, and uncertainty analysis

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines
• Occasional travel to ground network sites to support root cause investigations

ELECTRICAL TEST AND RELIABILITY ENGINEER, GATEWAYS (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation that provides fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, hundreds of gateway ground stations, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

As an Electrical Test and Reliability Engineer on Starlink, you’ll contribute to the design, build, and test electronics for the world's largest network of ground stations, which function as an intermediary between the satellites and our end-users to ensure smooth data transfer and transmission. You will sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our ground antenna hardware can withstand the harshest environmental conditions while maintaining reliable communication with millions of users on a global scale. This is an opportunity to work on cutting edge R&D technology, and some of the most complex applications of electrical and mechanical engineering in the industry.

RESPONSIBILITIES:

• Design, develop, and execute novel environmental, RF, mechanical, and electrical test solutions for our ground antenna electronics and payload
• Perform detailed failure analysis of ground antenna hardware, identifying root causes of failures and implementing corrective actions
• Select commercial-off-the-shelf hardware and/or design custom PCBAs to measure signals, apply flight-like loads, and power units under test
• Hands-on support of hardware through design qualification, production ramp, and ground network rollout
• Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design) to deliver tightly integrated, high-performance hardware
• Perform electrical bench testing of failures to replicate and inform mitigation of anomalies
• Drive continual improvements to our designs by building physical and digital tools to analyze data collected both in the field and in the lab
• Challenge assumptions and work to find simple solutions to complex problems

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• 1+ years of experience in hardware development, failure analysis, or reliability engineering (internships and co-ops acceptable)

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• Experience with both electronics and mechanical design and analysis including knowledge of RF principles
• Experience analyzing circuits and PCBAs, and developing functional test plans
• Experience with test equipment and measurement techniques to verify and validate product requirements (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.)
• Experience in environmental testing such as HALT/HASS, thermal, humidity, shock & vibration
• Strong understanding of computers and programming languages (Python, C/C++)
• Thorough understanding of electronics reliability, manufacturing, and failure mechanisms
• Knowledge of quality tools such as Lean principles, Six Sigma, and root cause analysis methods
• Thorough understanding of metrology, sources of measurement error, and uncertainty analysis

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines
• Occasional travel to ground network sites to support root cause investigations

MANUFACTURING ENGINEER, GATEWAYS (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, ground station gateways, and consumer antennae that allow users to connect within minutes of unboxing. We’ve only begun to scratch the surface of Starlink’s potential global impact, and we are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites – they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. As a manufacturing engineer for gateways, you will holistically drive manufacturing tools and processes, from initial concept development to full-scale production, and will interact regularly with senior leadership during critical design phases for this complex hardware. You will own the relationship between the engineering development and production teams. Come join this high-performing team in designing and building out the world’s largest network of ground stations!

RESPONSIBILITIES:

• Design, commission, and qualify the production line for the next generation ground antennas
• Lead the production ramp up by working through multi-disciplinary issues to hit volume targets
• Drive yield, uptime, and rate improvements to hit program targets (OEE)
• Lead prototype builds ensuring incremental milestones for the production development are met
• Provide feedback to the engineering design team to improve design for manufacturability
• Collaborate with supply chain, production technicians, and quality personnel to ensure processes are robust and any production problems are quickly solved
• Identify and establish requirements for automation opportunities while thoroughly evaluating them for return on investment 
• Manage work instructions, process documentation, and training
• Drive corrective actions and process improvements on owned processes and products

BASIC QUALIFICATIONS:

• Bachelor's degree in an engineering discipline
• 1+ years of experience designing, building, manufacturing, or testing hardware (internship experience is applicable)

PREFERRED SKILLS AND EXPERIENCE:

• Demonstrated experience in high-volume or medium-volume manufacturing environments such as consumer electronics, automotive, aviation or industrial/commercial machinery
• Proficiency in CAD software (e.g., Siemens NX, SolidWorks) for design and modeling of manufacturing tools and processes.
• Knowledge of lean manufacturing principles, Six Sigma methodologies, and process optimization to support rapid iteration and high-volume production
• Familiarity with aerospace materials (e.g., aluminum alloys, titanium, carbon fiber composites) and their processing, including heat treatment and non-destructive testing
• Programming and automation skills, such as Python, MATLAB, or PLC programming for factory automation, data analysis, and yield improvement
• Strong problem-solving abilities, including root cause analysis (e.g., using 8D or fishbone diagrams) and experience with failure modes and effects analysis (FMEA)
• Experience with quality control systems, ISO/AS9100 standards, and statistical process control (SPC) to ensure reliability in high-stakes environments
• Ability to thrive in a fast-paced, iterative development environment with cross-functional collaboration (e.g., working with design, supply chain, and test teams)
• Basic understanding of safety protocols, including OSHA regulations and handling of hazardous materials in aerospace/automotive manufacturing
• Excellent communication skills for documenting processes, presenting data, and training production teams

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines
• Ability to lift up to 25Ibs unassisted

MANAGER, GATEWAY ELECTRONICS ENGINEERING (STARLNK)

Starlink believes in providing fast, reliable internet to serve populations with little or no connectivity. We design, build, launch, and operate the world's largest constellation of satellites, enabling us to operate a global internet network unbounded by traditional ground infrastructure limitations. Starlink also designs, builds, and delivers high-volume consumer hardware that allows users to connect to these satellites within minutes of unboxing, as well as our advanced gateways that we deploy regionally throughout the world. The root of SpaceX’s success so far lies in our mission to keep all engineering and production in-house, which enables a tight feedback loop, nimble decision-making, and speedy deliverables. With millions of daily users worldwide already online, Starlink is truly a game changer and levels the playing field for those who were previously unconnected.

As the Electronics Manager on the Starlink team, you will be responsible for the design, performance, and reliability of next-generation gateways - ultimately ensuring that our ground station antenna hardware can withstand the harshest environmental conditions while maintaining reliable communication with millions of users on a global scale. You will interact regularly with senior leadership to influence the fundamental operation of our constellation and network while collaborating with electrical, silicon, software, mechanical, and manufacturing teams to steer this project from initial concept development to full-scale production.

RESPONSIBILITIES:

• Manage a team of 5-10 engineers to rapidly design, develop, and validate highly reliable electronics for our gateway systems
• Drive electrical architecture, specification, component selection, circuit board design, implementation, verification, board bring-up, and debugging
• Define and manage all key project milestones and deliverables
• Maintain alignment with key partners such as antenna, software, mechanical, networking, thermal, manufacturing, and production test teams to drive overall business success
• Compile and maintain lessons learned to influence future designs. Understand and implement long-term technical and business solutions that meet/exceed goals to deliver for our customers and Starlink’s vision
• Drive product architecture with a focus on innovative solutions to achieve low cost, greater performance, best user experience, and extended reliability. Implement automated design validation tests and production tests as necessary
• Recruit, develop, and promote a team of exceptional engineers and/or specialists responsible for designing, analyzing, building, and testing existing and new Starlink gateways. Set standards, and hold the team accountable to deliver with high technical rigor and discipline
• Own and build out associated engineering lab or development workspaces; hire necessary team members to deliver assets required, and efficiently manage associated capital spend
• Consistently contribute effort, leadership, and creative thinking to solving complex problems in a collaborative fashion and under tight deadlines. Above all, remain dependable, which means being unfazed by ambiguity or major changes in strategic direction
• Ensure a strong focus is placed on safety and maintain an excellent safety record

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other engineering/STEM discipline
• 7+ years of professional experience with hardware design/development or electronics test engineering
• 3+ years of management experience

PREFERRED SKILLS & EXPERIENCE:

• Previous experience managing large and multidisciplinary technical projects, ideally driving hardware design from concept through production; strong emphasis on full life-cycle development of new hardware products and not small incremental updates to legacy hardware
• Significant experience rapidly designing and delivering highly-reliable products, especially for harsh or high stakes environments in the field
• Significant experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components
• Significant experience testing, troubleshooting, and debugging electronics 
• Strong problem-solving skills when designing and qualifying hardware for EMC/EMI compliance and thermal management
• Strong understanding of computers and programming languages (Python, C/C++)
• Strong understanding of computer networking and interfaces (10/100/400/800G networking/Tbps switches)
• Strong understanding of optical networking architectures and fundamentals
• Experience in desktop/server Linux and embedded operating systems
• Experience leading a diverse team of engineers, while providing technical direction and strong mentorship
• Ability to communicate complex concepts, problems, and solutions clearly and effectively to all levels within the organization
• Ability to manage multiple concurrent programs and be able to discuss configuration, execution, and results in a technical manner

ADDITIONAL REQUIREMENTS: 

• Must travel to other SpaceX sites (Hawthorne, CA and Redmond, WA) as needed to interface with team members and drive technical projects
• Ability to work long hours and weekends as necessary

PRINCIPAL AUTOMATION & CONTROLS ENGINEER (STARLINK) 

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

One key component of SpaceX’s success so far is our commitment to keeping all engineering and production in-house, which enables a tight feedback loop, nimble decision-making, and speedy deliverables. Principal Automation & Controls Engineers at our Bastrop site are hyper-focused on designing and developing full factory solutions for consumer electronics in the tens of millions that are both technically sophisticated and easy to use, as well as thousands of gateways that we deploy regionally throughout the world. As a member of this team, you will lead creative, multi-disciplinary projects spanning industrial controls, machine design, robotics, motion systems, and factory health monitoring that all come together to form the innovative, high-rate factories that allow us to deliver internet to those that need it most. 

RESPONSIBILITIES: 

• Design, develop, and manage automation projects - this includes initial factory ideation, machine commissioning, and proof of rate capability, and eventual hand-off to operational teams 
• Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for high-volume manufacturing applications 
• Keep our factory safe and reliable by implementing ANSI/RIA15.06/OSHA compliant systems for robots, gantries, conveyors, and other manufacturing equipment
• Generate aesthetically simple HMI screens to make complex machines easy to understand, operate, and troubleshoot
• Design electrical systems compliant to NEC, NFPA, & UL508A regulations
• Stay organized by creating schedules and budgets, and then motivate the team to achieve them 

BASIC QUALIFICATIONS: 

• Bachelor's degree in engineering, physics, or computer science discipline 
• 10+ years of experience with mechanical/electromechanical manufacturing, design, analysis, testing, and/or programming

PREFERRED SKILLS AND EXPERIENCE: 

• Excited by a quick and iterative design and manufacturing role
• Proven ability to solve complex problems with simple solutions in both design and implementation stages
• Excellent communication skills both written and verbal, with the ability to make plans and directional recommendations collaboratively and cross-functionally
• Ability to engineer creative, new approaches to problems while adhering to ANSI/RIA15.06/OSHA safety requirements to keep a factory safe 

Experience with at least one of the specific disciplines listed below. The ideal candidate is interested in learning at least the fundamentals of the other areas they are not yet strong in. 

Electrical/Industrial Controls: 

• Electrical sizing of motors, cables, circuit protection, VFDs, motor starters, various other motion systems 
• Design of fail-safe electrical circuits using both safety logic controllers and safety-rated relays 
• Hands-on experience troubleshooting industrial electrical systems using tools like multimeters, oscilloscopes, EMI probes
• Proficiency in understanding and creating electrical schematics and single line diagrams (EPLAN preferred)
• Field bus networks, serial communication, and Ethernet communication
• Hands-on experience designing and commissioning high quality electrical panels and electro-mechanical systems with appropriate safety considerations in mind
• Knowledge of NEC, NFPA, UL508A codes with ability to ensure compliance with control system safety standards 

Industrial Software: 

• PLC programming, preferably Beckhoff TwinCAT structured text programming 
• Programming and implementing machine safety software through the use of safety PLC’s 
• HMI, SCADA, IoT (MQTT, OPC-UA), ignition systems with focus on user friendly navigation and machine health monitoring and control 
• Field Bus Networking protocols, preferably EtherCAT, Profinet, Profisafe, Ethernet/IP 
• Robotics programming, preferably ABB
• Industrial software application to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, including how to safely checkout these interdisciplinary systems prior to production implementation 

ADDITIONAL REQUIREMENTS: 

• Ability to work long hours and weekends as necessary to support critical milestones 

HARDWARE DEVELOPMENT ENGINEER, GATEWAY FAILURE ANALYSIS (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation that provides fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, hundreds of gateway ground stations, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

As a Hardware Development Engineer on Starlink, you’ll contribute to the design, build, and test electronics for the world's largest network of ground stations, which function as an intermediary between the satellites and our end-users to ensure smooth data transfer and transmission. You will sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our ground antenna hardware can withstand the harshest environmental conditions while maintaining reliable communication with millions of users on a global scale. This is an opportunity to work on cutting edge R&D technology, and some of the most complex applications of electrical and mechanical engineering in the industry.

RESPONSIBILITIES:

• Design, develop, and execute novel environmental, RF, mechanical, and electrical test solutions for our ground antenna electronics and payload
• Perform detailed failure analysis of ground antenna hardware, identifying root causes of failures and implementing corrective actions
• Select commercial-off-the-shelf hardware and/or design custom PCBAs to measure signals, apply flight-like loads, and power units under test
• Hands-on support of hardware through design qualification, production ramp, and ground network rollout
• Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design) to deliver tightly integrated, high-performance hardware
• Perform electrical bench testing of failures to replicate and inform mitigation of anomalies
• Drive continual improvements to our designs by building physical and digital tools to analyze data collected both in the field and in the lab
• Challenge assumptions and work to find simple solutions to complex problems

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• 1+ years of experience in hardware development, failure analysis, or reliability engineering (internships and co-ops acceptable)

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• Experience with both electronics and mechanical design and analysis including knowledge of RF principles
• Experience analyzing circuits and PCBAs, and developing functional test plans
• Experience with test equipment and measurement techniques to verify and validate product requirements (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.)
• Experience in environmental testing such as HALT/HASS, thermal, humidity, shock & vibration
• Strong understanding of computers and programming languages (Python, C/C++)
• Thorough understanding of electronics reliability, manufacturing, and failure mechanisms
• Knowledge of quality tools such as Lean principles, Six Sigma, and root cause analysis methods
• Thorough understanding of metrology, sources of measurement error, and uncertainty analysis

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines
• Occasional travel to ground network sites to support root cause investigations

SR. HARDWARE DEVELOPMENT ENGINEER, GATEWAY FAILURE ANALYSIS (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation that provides fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, hundreds of gateway ground stations, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

As a Sr. Hardware Development Engineer on Starlink, you’ll contribute to the design, build, and test electronics for the world's largest network of ground stations, which function as an intermediary between the satellites and our end-users to ensure smooth data transfer and transmission. You will sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our ground antenna hardware can withstand the harshest environmental conditions while maintaining reliable communication with millions of users on a global scale. This is an opportunity to work on cutting edge R&D technology, and some of the most complex applications of electrical and mechanical engineering in the industry.

RESPONSIBILITIES:

• Design, develop, and execute novel environmental, RF, mechanical, and electrical test solutions for our ground antenna electronics and payload
• Perform detailed failure analysis of ground antenna hardware, identifying root causes of failures and implementing corrective actions
• Select commercial-off-the-shelf hardware and/or design custom PCBAs to measure signals, apply flight-like loads, and power units under test
• Hands-on support of hardware through design qualification, production ramp, and ground network rollout
• Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design) to deliver tightly integrated, high-performance hardware
• Perform electrical bench testing of failures to replicate and inform mitigation of anomalies
• Drive continual improvements to our designs by building physical and digital tools to analyze data collected both in the field and in the lab
• Challenge assumptions and work to find simple solutions to complex problems

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• 5+ years of experience in hardware development, failure analysis, or reliability engineering 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• Experience with both electronics and mechanical design and analysis including knowledge of RF principles
• Experience analyzing circuits and PCBAs, and developing functional test plans
• Experience with test equipment and measurement techniques to verify and validate product requirements (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.)
• Experience in environmental testing such as HALT/HASS, thermal, humidity, shock & vibration
• Strong understanding of computers and programming languages (Python, C/C++)
• Thorough understanding of electronics reliability, manufacturing, and failure mechanisms
• Knowledge of quality tools such as Lean principles, Six Sigma, and root cause analysis methods
• Thorough understanding of metrology, sources of measurement error, and uncertainty analysis

ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines
• Occasional travel to ground network sites to support root cause investigations