MATERIALS ENGINEER, POLYMERS (STARLINK) 

Starlink, our revolutionary satellite constellation, will deliver low-latency broadband internet worldwide. We are committed to offering access to high-speed internet to customers, and are looking for a Polymers Engineer to utilize their knowledge, experience, and creativity to solve material selection and processing challenges as we ramp service. 

RESPONSIBILITIES:  

• Responsible for the development, test and performance evaluation of polymeric materials used across various Starlink products 
• Support polymer selection and implementation by collaborating with design engineers to establish required design inputs for ensuring a cost-effective and reliable mass consumer electronic 
• Collaborate with other engineers, subject matter experts, and technicians to solve complex material and processing challenges on our current and next generation products 
• Lead successful scale-up from prototype to production of relevant injection molded parts 
• Engage in root cause failure investigations as a subject matter expert for failure mechanisms 

BASIC QUALIFICATIONS: 

• Bachelor's degree in materials science or an engineering discipline 
• 1+ years of experience with characterizing, testing, and evaluating the performance of thermoplastics, elastomers, and/or adhesives 

PREFERRED SKILLS AND EXPERIENCE: 

• Master's degree or PhD in materials science, materials engineering, or polymer engineering  
• 5+ years of professional work experience (consumer products or electronics sectors are preferable) 
• Diverse knowledge of polymeric and elastomeric materials and their processing 
• Knowledge of polymer additives, fillers, and reinforcements, and their impact on polymer processing 
• Experience in polymer characterization techniques and equipment, including SEM-EDS, FTIR, DSC, TGA, LFA, rheometry, optical microscopy, hardness testers, and mechanical property testing 
• Broad understanding of failure modes in polymeric materials 
• Experience with developing new processes, improving efficiencies and successfully transferring to production 
• Development of new testing techniques and custom test jigs 
• Demonstrated track record of success in a rapidly growing, fast-paced and highly competitive environment 

ADDITIONAL REQUIREMENTS:

• Must be available to work extended hours and weekends as needed
• Willingness and ability to travel up to 25% time
• Work performed in an environment requiring exposure to fumes, odors, and noise
• Comfort occasionally working in tight or confined spaces

MATERIALS ENGINEER, SATELLITES (STARLINK)

At SpaceX, we’re leveraging our rocket and spacecraft expertise to deploy Starlink, the world’s largest and most advanced satellite constellation, delivering fast internet to over 10 million users worldwide. We design, build, test, and operate the full system — from thousands of satellites to user terminals and software.

We’re revolutionizing the launch market through rapid reusability and cutting-edge technology. As a Materials Engineer, you’ll take a hands-on role in developing, implementing, and troubleshooting advanced material systems. You’ll use your expertise, experience, and creativity to solve complex material selection and processing challenges as we scale Starlink for high-volume production.

RESPONSIBILITIES:

• Own the development, scale-up, qualification, reliability testing, and production stabilization of novel thermoset and thermoplastic polymer systems (adhesives, sealants, coatings, rubbers, plastics, and injection-molded parts) for Starlink satellites and products, applying deep process knowledge and expertise.
• Guide engineering, production, and supply chain teams on material selection, testing, analysis, DFM requirements, application processes, and design allowables to deliver cost-effective, robust solutions for harsh space environments.
• Lead root cause failure investigations, acting as the subject matter expert (SME) for polymer failure mechanisms through hands-on laboratory testing of flight hardware and raw materials, always driving to first principles.
• Champion innovation by solving high-ambiguity problems through rapid iteration (“the algorithm”), providing risk foresight in design reviews, performing production walk-downs, conducting ROI analyses, and leading prototype-to-volume transitions.
• Collaborate cross-functionally to drive material and process improvements on current and next-generation products, while mentoring team members on problem-solving, technical judgment, escalation, and collaboration.

BASIC QUALIFICATIONS:

• Bachelor’s degree in materials science, materials engineering, polymer science, chemistry, physics, or other engineering discipline.
• 1+ years of experience characterizing, testing, and evaluating the performance of plastics, elastomers, and adhesives.

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree or PhD in materials science, materials engineering, polymer, chemistry, physics, or a related engineering field.
• Strong interpersonal and collaborative skills with genuine enthusiasm for the team’s spirit of innovation in cutting-edge technology.
• Hands-on experience with polymer characterization techniques and equipment, including SEM-EDS, FTIR, DSC, TGA, LFA, DMA, TMA, rheometry, optical microscopy, and mechanical property testing.
• Familiarity with industry specifications for adhesives, sealants, coatings, structural plastics, and other non-metallic materials.
• Demonstrated track record of success in a fast-paced, highly competitive environment.
• Strong ability to work autonomously, communicate effectively, and take extreme ownership of areas of responsibility.
• Broad knowledge of aerospace-grade polymeric and elastomeric materials and their processing.
• Deep understanding of failure modes in polymer materials.
• Experience with technical review of polymer processing and the interaction between process variables and final material performance.

ADDITIONAL REQUIREMENTS:

• Willingness to travel to other SpaceX sites and/or vendors for significant or extended periods (up to 25%).
• Ability to lift up to 30 lbs unassisted.
• Ability to stand/walk for long periods of time.
• Extended hours and weekend work may be required to support critical project and mission milestones.

COMPENSATION AND BENEFITS:

Pay range:    
Level I: $100,000.00 - $115,000.00/per year    
Level II: $110,000.00 - $135,000.00/per year    
    
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

SR. MATERIALS ENGINEER, SILICON CRYSTAL GROWTH (STARLINK)

Starlink, our revolutionary satellite constellation, will deliver low-latency broadband internet worldwide. We are committed to offering access to high-speed internet to customers and are looking for a Materials Engineer to utilize their knowledge, experience, and creativity to solve materials and processing challenges in silicon crystal growth and wafer production for Starlink solar cells.

RESPONSIBILITIES:

• Own the full lifecycle of equipment specification, validation, and process development for silicon ingot and wafer production.
• Specify and implement in-process and off-line metrology tools for quality control.
• Develop silicon ingot and wafer quality specifications; conduct testing and performance evaluation to ensure specifications are met.
• Lead root cause failure investigations to resolve process issues.
• Push material and crystal growth process limits to enable higher PV efficiency.
• Collaborate with leadership and stakeholders to drive scale-up plans from R&D to production of silicon ingots and wafers.

BASIC QUALIFICATIONS:

• Bachelor's degree in materials science, chemical engineering, or a STEM field.
• 5+ years of experience in semiconductor crystal growth manufacturing, research, or characterization.

PREFERRED SKILLS AND EXPERIENCE:

• Master's degree or PhD in materials science, chemical engineering, or a related field.
• 8+ years of professional work experience (photovoltaics, semiconductor, or crystal growth sectors preferred).
• Expertise in CZ crystal growth fundamentals, including thermal management, impurity control, and defect mitigation.
• In-depth knowledge of polysilicon feedstock, dopants, crucible materials, and their impact on ingot quality and yield.
• Proficiency in silicon ingot/wafer characterization techniques and equipment, including ICP-MS, GDMS, XRT, SEM/TEM, FTIR, resistivity mapping, and minority carrier lifetime testing (PL).
• Experience with Statistical Process Control (SPC), Design of Experiments (DOE), and manufacturing metrics (e.g., CPK, yield, OEE) in production environments.
• Demonstrated track record in developing new processes, improving efficiencies (e.g., pull rates, purity >9N), and successfully transferring to production in a rapidly growing, fast-paced environment.
• Proven cross-functional leadership skills, with experience aligning diverse teams to achieve shared technology goals.

ADDITIONAL REQUIREMENTS:

• Must be available to work extended hours and weekends as needed.
• Willingness and ability to travel up to 25% time.
• Work performed in an environment requiring exposure to fumes, odors, and noise.
• Comfort occasionally working in tight or confined spaces.

MATERIALS R&D TECHNICIAN 

In this role as a Materials R&D Technician, you will focus on daily lab operations to support materials and process development, failure investigations, process control validation, and more—for Starlink user terminals, gateways, printed circuit boards, panel-level packaging, and solar products. Hands-on laboratory experience is required. A basic understanding of materials science fundamentals is preferred. The ideal candidate is highly skilled in setting up, operating, maintaining, and troubleshooting laboratory equipment. Success in this role requires being hands-on, flexible, a quick learner, organized, detail-oriented, and having a collaborative, results-oriented attitude.

RESPONSIBILITIES:

• Maintain safe and efficient operations by enforcing proper workflow, safety, cleanliness, organization, and inventory control of lab consumables.
• Support maintenance and calibration needs of lab instrumentation.
• Ensure proper and consistent sample preparation and traceability for materials testing.
• Calibrate, maintain, troubleshoot, and operate thermoanalytical equipment (DSC, DMA, TGA, TMA); microscopy tools (FTIR, Raman, SEM/EDS); RF equipment (VNAs, dielectric testers); optical spectroscopy equipment (spectrophotometers, ellipsometers, photoluminescence) and mechanical test frames. 
• Prepare reports on generated materials test data. Provide basic interpretations of results to requesters and flag off-nominal results for engineering review.
• Summarize data and document results in an organized and thorough manner. 
• Develop, author, and implement standard operating procedures.
• Manage lab backlog and ensure requests are performed according to program priorities.
• Champion larger-scale lab improvement initiatives while completing day-to-day test requests.
• Promote 5S principles for organizing and sustaining a clean, tidy workspace.
• Properly use and maintain precision-calibrated tools, such as micrometers and calipers, to ensure accurate measurements.
• Familiarize yourself with relevant ASTM, ISO, and IPC standards.

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate.
• 1+ years of materials testing experience in a laboratory environment.

PREFERRED SKILLS AND EXPERIENCE:

• Associate degree in an applied science field or 2+ years of professional experience in a lab environment.
• Knowledge of safe work practices in environments involving furnaces, environmental chambers, saws, solvents, acids/bases, etc.
• Understanding of basic materials science fundamentals.
• Experience setting up and running tests and experiments.
• Positive attitude and experience working on cross-functional teams.
• Strong attention to detail when executing test instructions.
• Proficiency in Microsoft Office suite (Excel, Word, PowerPoint), Atlassian JIRA, and work order systems.
• Strong interpersonal and verbal communication skills to collaborate closely with engineering teams.
• Strong organizational skills to keep work areas tidy and manage workflow.
• Creative approach to problem-solving, with a willingness to learn and try new things.
• Experience using various hand tools and/or power tools.

ADDITIONAL REQUIREMENTS:

• Able to work off-shifts and available for overtime and weekends if needed. 
• Able to wear appropriate PPE for lab and machine shop environment.
• Able to lift a minimum of 50 lbs. unassisted.
• Lifting, standing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.

SR. MATERIALS ENGINEER, SATELLITES (STARLINK)

At SpaceX, we’re leveraging our rocket and spacecraft expertise to deploy Starlink, the world’s largest and most advanced satellite constellation, delivering fast internet to over 10 million users worldwide. We design, build, test, and operate the full system — from thousands of satellites to user terminals and software.

We’re revolutionizing the launch market through rapid reusability and cutting-edge technology. As a Senior Materials Engineer, you’ll take a hands-on role in developing, implementing, and troubleshooting advanced material systems. You’ll use your expertise, experience, and creativity to solve complex material selection and processing challenges as we scale Starlink for high-volume production.

RESPONSIBILITIES:

• Champion new thermal-optical, inorganic, and organic coating technologies for Starlink satellites from concept through qualification, implementation, and production stabilization; collaborate with cross-functional teams to define requirements, evaluate optical performance, and deploy optimized solutions.
• Apply deep fundamentals of coating science, optical design, and deposition processes to develop high-performance surfaces for space applications.
• Lead rigorous space environment testing and reliability validation, including thermal vacuum cycling, atomic oxygen, radiation, UV exposure, and other orbital simulations; iterate designs to ensure long-term durability in harsh space conditions.
• Solve difficult technical problems of the highest scope and ambiguity; take action on these challenges by applying first principles, removing unnecessary complexity, and identifying innovative solutions through rapidly iterating, learning, and adjusting.
• Conduct root cause investigations of material-related failures with hands-on laboratory testing of flight hardware and raw material; drive down root cause to first principles mechanisms of material performance that may have influenced system-level results.
• Provide expert input on material selection and design during hardware design reviews, offering practical recommendations for performance, simplicity, and cost.
• Perform production process walk-downs to identify opportunities for new materials or process improvements that enhance reliability, rate, and yield.
• Mentor peers and team members on technical problem solving, decision-making, and exercising good engineering judgment; be a point of escalation for blockers and encourage cross-team collaboration when solving technical challenges.
• Develop and publish material design allowables that accurately reflect operational loads and space environments.

BASIC QUALIFICATIONS:

• Bachelor’s degree in Materials Science, Materials Engineering, Chemical Engineering, Chemistry, Physics, or an engineering discipline.
• 5+ years of professional experience in electronic materials, polymers, space survivable coatings, EEE packaging, RF-transparent materials, and/or joining technologies (bonding, welding, brazing, soldering).

PREFERRED SKILLS AND EXPERIENCE:

• Master's or PhD in Materials Science, Materials Engineering, Chemical Engineering, Chemistry, Physics, or a related technical discipline.
• Strong expertise in materials for space applications, including coatings, polymers, electronic materials, and joining technologies.
• Deep understanding of material performance in space environments, including degradation mechanisms and long-term stability.
• Hands-on experience with material characterization techniques (SEM-EDS, FTIR, DSC, TGA, optical spectroscopy, mechanical testing) and space environment testing.
• Demonstrated ability to link material/process variables to resulting performance and reliability.
• Proven track record of successfully developing, qualifying, and transitioning materials from concept through high-volume production.
• Strong interpersonal and collaboration skills with a passion for innovation in cutting-edge space technology.
• Self-motivated with excellent organizational, written, and verbal communication skills.
• Ability to make fast, data-driven decisions in a fast-paced and ambiguous environment.

ADDITIONAL REQUIREMENTS: 

• Willingness to travel to other SpaceX sites and/or vendors for significant or extended periods (up to 25%).
• Ability to lift up to 30 lbs unassisted.
• Ability to stand/walk for long periods of time.
• Willingness to work long hours and weekends as needed to support manufacturing and test campaigns.

COMPENSATION AND BENEFITS:

Pay range:    
Sr. Materials Engineer: $130,000.00 - $180,000.00/per year    
   

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MATERIALS R&D TECHNICIAN, SILICON CRYSTAL GROWTH

As a Materials R&D Technician, Silicon Crystal Growth on Starlink, you will partner directly with engineering to rapidly bring online state-of-the-art silicon ingot and wafer fab R&D lines to develop and refine recipes for producing high-quality ingots and wafers. These wafers will feed internal solar cell fabrication for our next generation Starlink satellites and Starship missions to the Moon and Mars. You will be responsible for silicon ingot pulling equipment commissioning, recipe and process development, monitoring and troubleshooting equipment, characterizing ingot and wafer quality, and transferring a stable process to the production teams.

RESPONSIBILITIES:

• Partner with engineering to rapidly bring online state-of-the art silicon ingot and wafer fab development lines.
• Drive equipment setup, calibration, troubleshooting, and maintenance.
• Prepare raw materials, seeds, and hot zone components for crystal growth.
• Execute DOEs and process trials to inform seeding techniques, recipe optimization, thermal management, impurity control, and defect mitigation.
• Perform silicon ingot and wafer characterization; ensure associated lab equipment is maintained and calibrated.
• Safely handle chemicals and adhere to all EHS protocols to maintain a safe work environment.
• Ensure 5S standards and cleanroom protocols are upheld by maintaining a clean and organized work area.
• Participate in training exercises for production silicon growth technicians, as needed.

BASIC QUALIFICATIONS:

• High school diploma or equivalency certification.
• 3+ years of hands-on experience in silicon crystal growth, semiconductor, or similar, manufacturing.
• Experience handling flammable, toxic, corrosive, and/or hazardous chemicals safely.

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor's or associate's degree in a STEM field.
• 5+ years of hands-on work experience in silicon crystal growth manufacturing.
• Experience using and maintaining silicon ingot/wafer characterization techniques and equipment, including ICP-MS, GDMS, XRT, SEM/TEM, FTIR, resistivity mapping, and minority carrier lifetime testing (PL).
• Proven ability to understand and accurately follow complex manufacturing procedures and adhere to safety requirements; strong attention to detail.
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams.
• Ability to identify and maintain priorities for work scope.
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight.

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed.
• Must be comfortable working in a production environment using hazardous chemicals such as acids, alkalis, and solvents.
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment.
• Must be able to walk and stand for long periods of time.
• Must be able to lift 25 lbs. unassisted.
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces.

MATERIALS R&D TECHNICIAN, SILICON WAFER ENGINEERING

As a Materials R&D Technician, Silicon Wafer Engineering on Starlink, you will partner directly with engineering to rapidly bring online state-of-the-art silicon wafer fab R&D lines to develop and refine recipes for producing high-quality wafers. These wafers will feed internal solar cell fabrication for our next generation Starlink satellites and Starship missions to the Moon and Mars. You will be responsible for silicon wafer fabrication equipment commissioning, process development, monitoring and troubleshooting equipment, characterizing wafer quality, and transferring a stable process to the production teams.

RESPONSIBILITIES:

• Partner with engineering to rapidly bring online state-of-the art silicon wafer fab development lines that include wafer slicing, grinding, cleaning, degumming, and inspection stations.
• Drive equipment commissioning, calibration, troubleshooting, and maintenance.
• Perform hands-on wafer processing tasks (ingot cropping, slicing, cleaning, degumming, surface conditioning) to produce low-defect, high-reliability wafers.
• Execute DOEs to optimize silicon recycling procedures and minimize contamination of raw materials.
• Test and evaluate supplier materials (slurries, wires, adhesives, wet process chemicals) through contamination analysis and performance checks.
• Perform silicon wafer characterization; ensure associated lab equipment is maintained and calibrated.
• Safely handle chemicals and adhere to all EHS protocols to maintain a safe work environment.
• Ensure 5S standards and cleanroom protocols are upheld by maintaining a clean and organized work area.
• Participate in training exercises for production silicon wafer fabrication technicians, as needed.

BASIC QUALIFICATIONS:

• High school diploma or equivalent certification.
• 3+ years of hands-on experience in semiconductor wafer manufacturing, cleanroom operations, or high-tech production (photovoltaics or silicon processing).
• 1+ years of experience handling flammable, toxic, corrosive, and/or hazardous chemicals safely.

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor's or associate's degree in a STEM field.
• 5+ years of hands-on experience in silicon wafer manufacturing, with focus on slicing, cleaning, defect mechanisms, contamination control (metallic, organic, particulate), and surface chemistry.
• Experience using and maintaining silicon wafer characterization techniques and equipment, including ICP-MS, GDMS, XRT, SEM/TEM, FTIR, resistivity mapping, and minority carrier lifetime testing (PL).
• Proven ability to understand and accurately follow complex manufacturing procedures and adhere to safety requirements; strong attention to detail.
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams.
• Ability to identify and maintain priorities for work scope.
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight.

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed.
• Must be comfortable working in a production environment using hazardous chemicals such as acids, alkalis, and solvents.
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment.
• Must be able to walk and stand for long periods of time.
• Must be able to lift 25 lbs. unassisted.
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces.

MATERIALS R&D TECHNICIAN - LEVEL 4/5

As a Materials R&D Technician, Silicon Wafer Engineering on Starlink, you will partner directly with engineering to rapidly bring online state-of-the-art silicon wafer fab R&D lines to develop and refine recipes for producing high-quality wafers. These wafers will feed internal solar cell fabrication for our next generation Starlink satellites and Starship missions to the Moon and Mars. You will be responsible for silicon wafer fabrication equipment commissioning, process development, monitoring and troubleshooting equipment, characterizing wafer quality, and transferring a stable process to the production teams.

RESPONSIBILITIES:

• Partner with engineering to rapidly bring online state-of-the art silicon wafer fab development lines that include wafer slicing, grinding, cleaning, degumming, and inspection stations.
• Drive equipment commissioning, calibration, troubleshooting, and maintenance.
• Perform hands-on wafer processing tasks (ingot cropping, slicing, cleaning, degumming, surface conditioning) to produce low-defect, high-reliability wafers.
• Execute DOEs to optimize silicon recycling procedures and minimize contamination of raw materials.
• Test and evaluate supplier materials (slurries, wires, adhesives, wet process chemicals) through contamination analysis and performance checks.
• Perform silicon wafer characterization; ensure associated lab equipment is maintained and calibrated.
• Safely handle chemicals and adhere to all EHS protocols to maintain a safe work environment.
• Ensure 5S standards and cleanroom protocols are upheld by maintaining a clean and organized work area.
• Participate in training exercises for production silicon wafer fabrication technicians, as needed.

BASIC QUALIFICATIONS:

• High school diploma or equivalent certification.
• 5+ years of hands-on experience in semiconductor wafer manufacturing, cleanroom operations, or high-tech production (photovoltaics or silicon processing).
• 1+ years of experience handling flammable, toxic, corrosive, and/or hazardous chemicals safely.

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor's or associate's degree in a STEM field.
• 7+ years of hands-on experience in silicon wafer manufacturing, with focus on slicing, cleaning, defect mechanisms, contamination control (metallic, organic, particulate), and surface chemistry.
• Experience using and maintaining silicon wafer characterization techniques and equipment, including ICP-MS, GDMS, XRT, SEM/TEM, FTIR, resistivity mapping, and minority carrier lifetime testing (PL).
• Proven ability to understand and accurately follow complex manufacturing procedures and adhere to safety requirements; strong attention to detail.
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams.
• Ability to identify and maintain priorities for work scope.
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight.

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed.
• Must be comfortable working in a production environment using hazardous chemicals such as acids, alkalis, and solvents.
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment.
• Must be able to walk and stand for long periods of time.
• Must be able to lift 25 lbs. unassisted.
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces.