Principal Duties/Responsibilities:

· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

· Independently performs maintenance as per industry standards.

· Works with Planner Scheduler to optimize preventative maintenance procedures.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Complies with 5S and housekeeping standards.

· Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.

· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

· Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

· Updates records and reviews CMMS history and analyzes data.

· Completes and conducts on-the-job training and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry.

· Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

· Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate.

· Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.

· May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

Principal Duties/Responsibilities:

· Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools.

· Identifies needed parts, supplies, and repair items.

· Provides support and back up for other members of department as needed by leadership.

· Is aware of Maintenance Industry Standards.

· Assures compliance with 5S and housekeeping standards.

· Participates in CI activities - processes, results and cost savings.

· May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks.

· Updates records and reviews CMMS history.

· Performs basic troubleshooting of control systems circuitry.

· Completes technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program.

· Understanding of basic electrical and mechanical systems. Can perform repairs.

· Must be able to use basic hand tools.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.