WHO WE ARE  

Factorial Energy is a pioneering U.S.-based solid-state battery company driving the future of energy storage and electrification. Partnered with global leaders including Mercedes-Benz, Stellantis, Hyundai, and Kia, Factorial is at the forefront of developing next-generation e-mobility platforms for commercial, defense, and consumer applications—spanning electric vehicles (EVs), drones, eVTOL aircraft, power tools, marine systems, robotics, and more. The company has achieved multiple industry firsts, including being the first to power a demonstration vehicle with a global OEM (Mercedes-Benz) which achieved over 1,200 km (749 mi) of range, the first to earn UN 38.3 certification for automotive-sized solid-state cells, and the first to deliver B-samples of automotive-sized solid-state batteries to major OEMs. 

The Opportunity

Factorial is looking for an All-Solid-State Battery Anode Wet & SE Slurry Coating Process Engineer responsible for the wet slurry coating process and equipment development for anode and sulfide-based solid electrolyte (SE) applications. We leverage cutting-edge wet electrode manufacturing to revolutionize all-solid-state battery performance, cost, and scalability. This role requires experience in close cooperation with internal teams and external partners. This candidate will be involved from the beginning of process optimization for R&D projects, pilot line scale-up, and through to low/high-volume production. The candidate must demonstrate excellent written and verbal communication skills to facilitate efficient communication between various departments/vendors.

Duties and Responsibilities 

Duties and responsibilities include, but are not limited to: 

All-Solid-State Battery Anode Wet & SE Slurry Coating Process Development

• Lead R&D efforts to design, optimize, and scale wet slurry coating processes for ASSB anode and sulfide SE applications.
• Develop novel slurry formulations and coating strategies to enhance electrode-electrolyte interfacial compatibility, ionic transport efficiency, and cycling stability.
• Establish critical process parameters (e.g., slurry dispersion, viscosity control, coating speed, drying profiles) to meet all-solid-state battery performance specifications.
• Address key wet coating challenges specific to ASSB: solvent selection, slurry sedimentation, SE-solvent compatibility, and interfacial side reaction control.

Quality & Yield Improvement

• Identify root causes of wet coating defects (e.g., pinholes, thickness non-uniformity, cracks, lithium dendrite penetration) and implement corrective actions.
• Utilize statistical analysis (SPC, DOE) to drive yield improvements and reduce process variability.
• Collaborate with PD/QA to define testing protocols and quality standards for wet-processed all-solid-state electrodes.

Production Efficiency & Scalability

• Optimize manufacturing workflows to increase throughput and reduce unit production costs.
• Design experiments to validate process scalability from lab to pilot line to mass production.
• Troubleshoot equipment/process issues to minimize downtime.

Next-Generation Equipment Development

• Partner with equipment vendors to conceptualize, prototype, and validate next-gen wet coating electrode machinery.
• Define technical specifications for new equipment (e.g., vacuum-integrated drying systems, solvent recovery units).
• Drive innovation in automation, in-line monitoring, and Industry 4.0 integration.

Must Have Qualifications

Technical Expertise:

• 3+ years of hands-on experience in wet electrode coating manufacturing for lithium-ion batteries, sulfide electrolyte system experience highly preferred.
• Deep knowledge of wet process steps: slurry preparation (dispersion, deaeration), precision coating (doctor blade/slot-die), vacuum drying, calendaring, and lamination.
• Proficiency in material characterization (SEM, XRD, adhesion testing) and data analysis tools (JMP, Minitab).

Process & Quality Tools:

• Mastery of DOE, SPC, FMEA, and Six Sigma methodologies.
• Experience scaling processes from R&D to high-volume production.

Equipment & Innovation:

• Proven ability to collaborate with equipment suppliers on custom solutions.
• Familiarity with ASSB-specific process challenges (moisture control, interfacial stability, mechanical pressure sensitivity).

Education & Collaboration:

• Master's in chemical/Materials/Mechanical Engineering or related field.
• Strong cross-functional skills to work with R&D, production, and supply chain teams.

Nice to Have Qualifications

Preferred Qualifications:

• Hands-on experience with sulfide solid electrolyte systems or halide electrolyte systems.
• In-depth understanding of binder systems (PVDF, CMC/SBR) and conductive additives behavior in wet coating processes.

Who We Are

Factorial Energy is a pioneering U.S.-based solid-state battery company driving the future of energy storage and electrification. Partnered with global leaders including Mercedes-Benz, Stellantis, Hyundai, and Kia, Factorial is at the forefront of developing next-generation e-mobility platforms for commercial, defense, and consumer applications—spanning electric vehicles (EVs), drones, eVTOL aircraft, power tools, marine systems, robotics, and more. The company has achieved multiple industry firsts, including being the first to power a demonstration vehicle with a global OEM (Mercedes- Benz), which achieved over 1,200 km (749 mi) of range, and the first to earn UN 38.3 certification for automotive-sized lithium-metal solid-state cells, and the first to deliver B-samples of automotive-sized solid-state batteries to major OEMs.

The Opportunity:

We are seeking a motivated Cell Test Engineer with more than 4 years of experience in cell testing to support our rapidly growing solid-state battery development company. This role will be responsible for cell testing validation, protocol development, data processing and analysis. The ideal candidate will have experience in cell testing, and capable of interpreting test plans, and collaborating with the development team to complete cell qualifications.

Key Responsibilities

• developing and optimizing the cell testing system, including processes, standards, specifications, use cases, DVP, report templates, etc.
• coordinating with customers regarding testing standards, plans and schedules.
• following up on cell testing, including conducting tests, analyzing results, resolving testing issues and supporting the cell development team in failure analysis.
• organizing and analyzing cell data, reviewing test reports, establishing a cell database, and compiling automated data processing scripts.
• tracking and interpreting international standards and regulations, and benchmarking against industry-leading testing standards
• managing the testing laboratory and maintaining testing equipment, and planning annual testing requirements
• Develop new testing schemes

Qualifications

• Master’s degree 
• More than four years of relevant experience in cell testing, be familiar with the cell performance testing process and methods, understand the testing standards and safety regulations. 
• Able to quickly understand various testing requirements and possess the ability to convert requirements and write test plans, and implement testing work.
• Data analysis skills and be proficient in using data processing software to generate test reports.
• Familiar with the operation and data management of cell testing equipment (such as Neware, etc.), and have equipment maintenance capabilities.
• Have good teamwork and cross-departmental communication and cooperation skills, and be able to effectively communicate and cooperate with personnel from different departments to promote testing progress.
• Understand the working principle of lithium batteries, the mechanism of degradation and influencing factors. Possess strong data analysis capabilities and safety awareness in cell testing, be meticulous and sensitive to data.
• Fluent in English

What We Offer

• Opportunity to work in a cutting-edge solid-state battery technology company
• Collaborative and international working environment
• Competitive compensation and career growth opportunities

Who We Are

Factorial Energy is a pioneering U.S.-based solid-state battery company driving the future of energy storage and electrification. Partnered with global leaders including Mercedes-Benz, Stellantis, Hyundai, and Kia, Factorial is at the forefront of developing next-generation e-mobility platforms for commercial, defense, and consumer applications—spanning electric vehicles (EVs), drones, eVTOL aircraft, power tools, marine systems, robotics, and more. The company has achieved multiple industry firsts, including being the first to power a demonstration vehicle with a global OEM (Mercedes- Benz) which achieved over 1,200 km (749 mi) of range, and the first to earn UN 38.3 certification for automotive-sized lithium-metal solid-state cells, the first to deliver B-samples of automotive-sized solid-state batteries to major OEMs. 

The Opportunity:

We are looking for a Senior / Staff Power Cell Development Engineer who will be responsible for Factorial’s next-generation cell product development and cell technology. The successful candidate will assume a cell engineering and development role and join Factorial’s team in South Korea. This role will execute new platform development for silicon-based drone cells and LMB power cells in accordance with the technical roadmap, including material, formula, and process evaluations to enable product realisation. The role involves designing cell products according to customer requirements and validating performance, including electrochemical and safety performance, while driving continuous optimization. The engineer will lead NPI activities and be responsible for preparing and releasing all related documentation, including BOMs, DFMEAs, and a sample-building index. The role will participate in technical discussions with customers related to new product development programs and support battery material development, including cathodes (high-nickel NMC), anodes (graphite with silicon-based materials and lithium metal), separators, binders, and current collector foils, while also supporting other internal departments on cell product–related technical issues.

Duties and Responsibilities for the power cell development engineer (cover Si drone and LMB power cell):

• Base on the technical roadmap to conduct the new platform development including the material, formula, process evaluation to make it come true.
• Base on the customer requirements to design the cell products. And validate the performance including electrochemical/safety performance, then conduct the continuous optimization.
• Lead the new produce NPI, Responsible for all the related documents preparation and release, including the BOM, DFMEA and sample building index,
• Follow up the sample building and solve the issue, lead the FA
• Join the discussion with customers about the new product development-related topic.
• Support battery materials developments, for example: cathode (high Ni NMC), Anode (graphite+SiC, Li metal), Separator, new binder, collector foil etc.
• Support the other departments for the cell product related issues.

Requirements:

• At least mater degree
• At least 3years of power cell or drone cell product development experience. Know the lithium-ion battery and lithium metal battery very well. Can lead the product development independantly.
• Good FA/problem solving/data analysis capability
• Good communication with English.
• Rich experience for customer communication.

Factorial Energy is an equal opportunity employer that values diversity at all levels. All qualified applicants, regardless of personal characteristics, are encouraged to apply.

To request a reasonable accommodation to complete an application, job interview, and/or to otherwise participate in the hiring process, please contact (recruitment@factorialenergy.com)