Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

The SQE position is based at the Pittsburgh Technical Center, Pittsburgh PA, and reports to the Supplier Quality Manager based at the Las Vegas, Nevada Technical Center. Quarterly travel to Supplier manufacturing sites is anticipated (at a minimum). 

The SQE will be responsible for executing the Advanced Product Quality Planning (APQP) process with Suppliers selected for potential Generation 3 activities, in addition to pursuing continuous improvement and warranty reduction for the current Generation 2 build. The role involves conducting Program Reviews against established program milestones and escalating issues as necessary. The individual must ensure the supply base adheres to Motional standards, that quality and manufacturing processes are enabled, and that non-conformances are identified and prevented from proceeding to subsequent manufacturing sites. Prompt reaction to and cross-functional resolution of known non-conformances is required.

What you’ll do:

• Ensure supplier adherence to APQP processes, including product Production Part Approval Process (PPAP) submission and approval requirements.
• Review and approve supplier quality plans (Control Plans, Process Failure Mode and Effects Analysis [PFMEA]) for new components and assemblies essential for vehicle launch.
• Conduct reviews of supplier manufacturing processes and quality management systems.
• Facilitate root cause analysis and the implementation of corrective actions for supplier quality issues.
• Execute on-site supplier visits to conduct root cause analysis and verify the effectiveness of corrective actions related to supplier quality issues.
• Implement and monitor supplier part qualification and certification processes (PPAP, Run at Rate).
• Enhance the quality performance of suppliers through on-site workshops, providing technical assistance in developing robust quality systems, or offering other necessary technical support.
• Provide technical assistance during supplier launch, change-over, and ongoing production activities.
  
  

What We’re Looking For:

• A Bachelor's degree is mandatory. A degree in Engineering (Mechanical, Industrial, Electrical, Manufacturing, Welding, Plastics, Materials, Chemical preferred) or an equivalent Technical Degree such as Applied Mathematics, Chemistry, or Physics is acceptable.
• A minimum of 2 years of experience in quality, engineering, and/or manufacturing is required.
• Proficiency in reading and interpreting engineering drawings, performing part measurements, and understanding gage design and function.
• Demonstrated knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Proven knowledge of manufacturing and assembly plant processes, procedures, tooling, equipment, and facilities.
• Demonstrated knowledge of probability, statistical quality control, and design of experiments.
• Proven ability to investigate complex quality problems and apply sound technical judgment to develop effective solutions.
• Demonstrated ability to concurrently manage multiple projects and lead diverse cross-functional teams.
• High level of interpersonal skills necessary to work both independently and collaboratively.
• Strong oral, written, and presentation communication skills.
• Ability to travel up to 75% (domestic and international).
• This position necessitates the ability to legally operate a motor vehicle on a regular basis.
  
  

Bonus Points:

• One or more years of Original Equipment Manufacturer (OEM) or Tier 1 experience within automotive quality, manufacturing, or engineering functions, including demonstrated experience and capability in any of the following areas:.
• Statistical Problem Solving (e.g., Red X, Six Sigma, DMAIC).
• Product Engineering.
• Lean Manufacturing and/or Manufacturing Quality.
• Manufacturing, Process, and/or Tool Engineering.
• Quality Systems Planning (APQP), including PPAP.

This role is based in our Pittsburgh office and requires in-office days each week.

Senior Vision AI Engineer 
(Cognitive Vision and Industrial AI)

Location: Mid-Atlantic Region
Company: Linque
Reports to: Head of Vision AI

About Proconex

Proconex is a trusted leader in industrial automation and process control solutions, proudly serving the industry for over 75 years. With a rich legacy of delivering high-performance systems and equipment to process industries—including oil & gas, chemicals, power, and life sciences—we are now entering an exciting new chapter.

We are  building on a solid foundation of over 10 years of successful deployments with our next generation of software products. Our software solutions are designed to empower industrial operators with operational analytics, enabling smarter, more efficient, and more reliable operations. This is a unique opportunity to be part of a growth-focused team that is taking proven technology to the next level.

About the Role

Linque is expanding its Vision AI and Cognitive Automation platform focused on applying real-time computer vision and AI to industrial, biopharmaceutical, and process manufacturing environments. We are seeking a Senior Vision AI Engineer to help lead the development, deployment, and customer-facing application of advanced vision AI solutions. This role sits at the intersection of deep technical execution, platform development, and real-world industrial use cases.

Key Responsibilities

• Design, develop, and deploy production-grade computer vision and machine learning models
• Build optimized end-to-end vision pipelines for real-time and near-real-time applications
• Translate complex industrial problems into scalable AI architecture
• Collaborate cross-functionally with product, engineering, and commercial teams
• Participate in technical customer discussions, pilots, and evaluations
• Support prototypes through pilot and production transitions
• Mentor junior engineers and contribute to technical best practices

Required Qualifications

• 5+ years’ experience in computer vision and machine learning
• Strong hands-on experience deploying AI systems in production
• Proficiency in Python and modern ML frameworks (e.g., PyTorch, TensorFlow, Keras)
• Deep knowledge of Video / Image processing tools (e.g. Mask R-CNN, ResNet, U-Net)
• Knowledge of object and anomaly detection (Autoencoders, FastFlow, Transformers)
• Tunning experience for CNNs and Vision Models (e.g., MLFlow, NVIDIA TAO, MMD, MMS)
• Mastery of model interchange and GPU acceleration (e.g. ONNX, CUDA, cuDNN)
• Experience working with image/video pipelines, container orchestration (local and cloud)
• Understanding of the full ML / AI lifecycle

Preferred Qualifications

• Experience with real-time vision systems
• Background in industrial automation or regulated environments
• Experience with edge or cloud deployment
• Ability to communicate complex technical topics clearly

Why Join Linque

• Apply AI to real industrial problems with measurable impact
• Collaborate with experienced AI and industrial leaders
• Influence the evolution of next-generation Vision AI platforms
• Flexible, growth-oriented environment

Apply today to learn more about this exciting new opportunity at Proconex, the exclusive Emerson Impact Partner for the Mid-Atlantic region!

APPLICATIONS ENGINEER - FLOW CONTROL

Overview

We are seeking a talented and motivated Applications Engineer specializing in Flow Control to join our dynamic team in Royersford, PA. In this role, you will play a crucial part in providing technical support and solutions for our flow control products. If you have a passion for engineering and a knack for problem-solving, we want to hear from you!

Responsibilities

• Provide technical support to customers and sales teams regarding flow control products.
• Develop and deliver product demonstrations and training sessions.
• Collaborate with engineering and product management to enhance product offerings.
• Analyze customer requirements and propose tailored solutions.
• Assist in the preparation of technical documentation and marketing materials.
• Participate in product testing and validation processes.
• Stay updated on industry trends and competitor products.

Qualifications

• Bachelor’s degree in Engineering or a related field.
• 2+ years of experience in applications engineering or a similar role.
• Strong understanding of flow control principles and technologies.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a team-oriented environment.
• Proficiency in technical software and tools relevant to flow control applications.
• Strong analytical and problem-solving skills.

Are you a skilled sales person with a passion for building lasting relationships and providing top-notch customer support? Join our energy and industrial sales team and work closely with our customers to drive their growth and satisfaction. Apply now to take on this exciting opportunity and make a significant impact!

CONTROL SYSTEMS ENGINEER

(AUTOMATION, INFORMATION & OPERATIONS TECHNOLOGY SOLUTIONS)

We are seeking a control systems engineer with 3-5 years of experience in life sciences manufacturing, specialty chemicals, water/wastewater, oil & gas, energy, or another regulated process control environment in the greater Philadelphia, Princeton, Reading, Wilmington, or Allentown area.

SUMMARY

This position will primarily be involved in the specification, design, and configuration of programmable logic controllers (PLC), distributed control systems (DCS), manufacturing execution systems (MES), and data historians (OSI PI).  As part of an internal project team or supporting a client at their site, this role will interact with cross-functional groups to propose and assess modifications to equipment and processes to improve the efficiency of the operations to include preparing and executing engineering documentation, operating/maintenance procedures, commissioning and validation test plans for multiple process and utility systems.    

SKILLS AND EXPERIENCE

• 3 + years in control systems design and implementation. Preferably a broad technical base of experience in the SDLC of automated systems (process controls, MES, and/or data management).
• Good process knowledge and a thorough understanding of engineering documents, process control (to include PLC/DCS/SCADA), networks, control systems and application engineering.
• Working knowledge of structured methodologies for manufacturing systems such as programming skills.  Experience with Emerson DeltaV and/or the Allen Bradley family of controller and interfaces are strongly preferred.
• Prior experience in the biotechnology, pharmaceutical or similar FDA regulated industry is preferred along with experience in the development and execution of test plans, IQ, OQ, PQ validation protocols for new or upgraded integrated factory floor systems.

Apply today to learn more!

Lead Systems Engineer

Location: Royersford, PA (Wilmington, DE)

Position Type: Full-Time

About Proconex

Proconex is a leading solutions provider specializing in industrial automation, engineering, and process control. We are dedicated to delivering high-quality engineering services to our clients, especially in complex, project-based environments within life sciences and other critical industries.

Role Overview

The Lead Systems Engineer will take a hands-on role in the design, configuration, and start-up of Distributed Control Systems (DCS) in highly regulated industries. This position emphasizes technical leadership in executing projects from design to startup, with a focus on DeltaV and other DCS platforms, ensuring quality and compliance throughout the project lifecycle.

Key Responsibilities

• Lead the implementation of automation systems, primarily focusing on Distributed Control Systems (DeltaV or DeltaV MES).
• Design, develop, and test batch control processes, leveraging extensive experience with DCS configurations and system integration.
• Manage all stages of the project lifecycle including planning, installation, commissioning, and on-site support.
• Collaborate with cross-functional teams, providing expertise and coordinating with clients to align project goals, system requirements, and troubleshooting strategies.
• Support and mentor junior engineers, sharing best practices in system design, startup, and troubleshooting.
• Produce and review critical project documentation, such as functional specifications, user requirement specifications, risk assessments, and operational qualification protocols.
• Serve as a primary technical lead in interactions with clients, demonstrating technical solutions and advising on process optimization.

Qualifications

• Experience: 7-10 years in automation engineering with a focus on Distributed Control Systems implementation in a project-driven environment, preferably as a systems integrator.
• Technical Skills: Proven experience with DeltaV DCS or comparable platforms in life sciences with deep knowledge of system design, configuration, and batch processing.
• Industry Knowledge: Background in life sciences is preferred, though a strong control background in any industry will be considered.
• Leadership Abilities: Demonstrated experience in leading project teams or overseeing critical project phases, even if in an informal capacity.
• Education: Bachelor’s degree in Chemical, Electrical, or related Engineering field.

Why Proconex?

Joining Proconex means becoming part of an innovative team where engineering excellence meets real-world applications. You’ll have the opportunity to lead high-impact projects, leverage cutting-edge technology, and contribute to projects that make a difference in critical industries. Apply today to learn more!

Application Engineer - Systems Life Sciences

As an Application Engineer - Systems Life Sciences, you will play a pivotal role in supporting our Systems Sales (Outside) Group by leveraging your technical expertise and product knowledge to develop innovative solutions architectures and bills of materials. You will collaborate with various engineering teams, including Systems Engineering, Integration Engineering, Computer System Validation Engineering, and Lifecycle Field Services, to create comprehensive estimates and scope definitions for our proposals. Your deliverables will include professional proposals that clearly define the scope of work and supply, ensuring alignment with our business goals and customer needs.

This position requires you to be an in-house expert on our internal business systems, enabling you to extract data, develop new sales support tools, and keep pricing and other dynamic information current for the sales team. You will build strong relationships with Proconex resources, customers, and suppliers, and occasionally provide support at customer locations for product demonstrations and site walkdowns. Our customers span across enterprise life sciences, energy, oil and gas, wastewater, and specialty gas and chemical industries.

Key Responsibilities: 

•    Serve as a technical advisor to the Systems Sales Group, providing insights on product knowledge, solutions architectures, and bills of materials.
•    Develop and review professional proposals that clearly define the proposed scope of work and supply.
•    Create accurate proposal pricing spreadsheets or GP sheets, defining sell prices and costs for the proposed scope of work.
•    Collaborate with Systems Engineering, Integration Engineering, Computer System Validation Engineering, and Lifecycle Field Services organizations to develop estimates and scope definitions.
•    Maintain and update internal business systems to extract data, develop new sales support tools, and keep pricing information current.
•    Build and maintain strong relationships with Proconex resources, customers, and suppliers.
•    Provide support at customer locations for product demonstrations and/or site walkdowns as needed.

Job Requirements:

Education/Experience: 
•    Bachelor’s degree in an Engineering discipline or Technical field.
•    No specific years of experience are required; however, the ability to read, understand, and interpret technical drawings, manuals, and other documents is essential.
•    Technical industrial experience in an engineering capacity is a plus.

Key Competencies: 
•    Outstanding written communication skills.
•    Detail-oriented.
•    Proficiency in MS Word and Excel.
•    Strong technical aptitude and the ability to learn systems is required.
•    Familiarity with DeltaV, Windows Server, Network switches, ROC, Controlwave PAC, SCADA, Emerson AMS, PLC, Syncade MES, AVEVA-PI, AspenTech, AI, ML, Data Lake, Operational Intelligence, Hardware and Software, and Cybersecurity.
•    Broad engineering exposure to hardware design, software configuration, regulatory and batch control, and installation.

Working Conditions: 
•    Typical hours of operation are 8:30 am - 5:00 pm in a typical hybrid office setting with occasional field visits to customer plants.
•    Ability to participate in site walkdowns is beneficial.
•    May include light travel and extra hours if needed.

Why Join Us?

As an Emerson Impact Partner, Proconex is at the forefront of industrial manufacturing and process control technology. We work with the most advanced systems to drive innovation and efficiency in various industries. Joining our team means being part of a dynamic environment where your expertise will contribute to cutting-edge solutions and impactful projects.