Role

We are looking for a Principal Sales Engineer to join our team located in the South. This role will report to the Director of Sales Engineering for the Americas Field Sales team.

You will be responsible for architecting technical solutions that directly address and resolve critical customer pain points.

What you’ll do (Role Expectations)

• Overseeing the technical sales process
• Running Proof of Value from start to finish, as the technical and industry expert
• Collaborating and supporting internal Zscaler teams

Who You Are (Success Profile)

• You act like an owner. Your passion for the mission fuels your bias for action. You operate with integrity because you genuinely care about the outcome. You adapt to what’s needed, navigating seamlessly between high-level strategy and hands-on execution.
• You are a problem-solver. You seek out challenges because you are energized by finding solutions, knowing that solving the hard problems delivers the biggest impact.
• You are customer-obsessed. You build deep empathy for the customer—both internal and external—and anchor your decisions in solving their real-world problems. You champion their needs from start to finish, knowing their success is our success.
• You champion simplicity. You are skilled at distilling complex problems, user needs, and technical concepts into clear, simple, and actionable plans. You are a precise communicator who brings clarity and focus to every interaction.
• You are resilient and adaptable. You view change as an opportunity and setbacks as temporary. You maintain composure and focus in high-pressure situations, guiding yourself and your team through complexity with a steady, positive hand.

What We’re Looking for (Minimum Qualifications)

• Bachelor's Degree or equivalent experience
• 10+ years of experience as a Sales Engineer or Systems integrator
• Knowledge of network security technologies

What Will Make You Stand Out (Preferred Qualifications)

• Industry certifications including CCNP, JNCIP, PCNSA, CISSP, or CCSP
• Experience working with large enterprise and major accounts

#LI-Remote

#LI-EV1

Anduril’s Manufacturing team is seeking a Senior Manufacturing Engineer to join our team. The Manufacturing Engineering Team is responsible for rapidly iterating and building cutting-edge defense hardware, specifically solid fuel rocket motors. This responsibility includes everything in the manufacturing value-chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the hardware and processes that the Manufacturing Engineer owns.

The right person for this role can demonstrate past holistic ownership on solving a technical challenge with a creative, physical, solution that they either personally manufacturing or oversaw manufacturing on, in a fast-paced, resource-limited environment. If you are someone who thrives in such an environment, then this role is for you.

WHAT YOU'LL DO

• Lead the development and implementation of multiple complex manufacturing processes from concept to design
• Develop novel processing solutions for assembly of solid fuel rocket motors at high volumes
• Establish engineering standards and best practices
• Independently evaluate and recommend significant capital equipment with ROI analysis
• Manage CapEx projects from concept to implementation
• Control project budgets of significant scale with on-time and on-budget delivery
• Develop process flows, simplifying complex and critical operations into user friendly operations that maintain exceedingly high levels of safety and quality.
• Write documentation required for successfully manufacturing their hardware at scale, such as work instructions, quality plans, inspection requirements, etc.
• Work with contract manufacturers across various disciplines to develop repeatable, sustained processes for quick-turn development as well as at-scale production
• Work with technicians and other engineers hands-on, developing production ready processes
• Mentor and guide new engineers
• Manage and optimize established full rate production processes
• Communicate complex technical concepts across all levels of the organization
• Travel to suppliers to do initial sourcing work, solve ongoing production issues, and implement quality procedures as needed

REQUIRED QUALIFICATIONS

• Degree in a technical field such as engineering, math, or a hard science
• 10+ years of experience in a relevant field, preferably manufacturing or product processing
• Demonstrated ability to creatively deliver processes and products on time in a safe manner that meets or exceeds the required parameters defined by the product
• Demonstrated continuous improvement and process development skills and techniques
• Personal experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.) Work on personal or extracurricular projects is a plus.
• A genuine interest in manufacturing and thirst for learning
• U.S. Person status is required as this position needs to access export controlled data

PREFERRED QUALIFICATIONS

• High rate production experience with safety critical industries
• Hands-on experience solid fuel rocket motors
• New product development experience
• Factory commissioning experience
• Demonstrated experience with large and complex CapEx projects

ABOUT THE JOB

The Staff Supplier Industrialization Engineer, aircraft Composites is a high-profile, cross functional position that plays an integral role in enabling development and production flow of Anduril’s critical supply base. You will work in close coordination with internal engineering, quality, supply chain and manufacturing departments as well as directly with suppliers to execute effective, creative and smart supply chain strategies to achieve production goals. 

We're looking for a talented Staff Supplier Industrialization Engineer to expedite the qualification and implementation of product designs with our suppliers, optimizing these designs for quality, efficiency, and cost-effectiveness from early development through the entire product lifecycle.

WHAT YOU'LL DO

• Own and manage the aircraft composites commodities/subcategories to execute supplier production (NPI to full production) strategies across Anduril’s business lines
• Be a force multiplier for the Supply Chain team and overall commodity strategy, demonstrating a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage
• Vet Suppliers' production capabilities, factory lay out, facilities, workforce for supplier inclusion in Anduril's Approved Supplier List
• Support Supplier Quality Engineers (SQE) in ensuring Suppliers' understanding and adherence to the criteria for part quality set by SQE
• Own manufacturing process development at Supplier locations & the initialization of new production lines & tooling at Supplier sites to ensure materials, processes, & tools are capable of meeting product performance, quality, and production rate requirements
• Own the roadmap for capacity expansion, manufacturing readiness, and production ramp-up at Suppliers
• Establish and drive performance via statistical process control (SPC) reviews at Supplier
• Identify and drive product and process improvements, factory layout optimization at Supplier sites to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time over the product lifecycle
• Support SQE with root cause task force at Anduril by working in tandem with the Supply Chain team, Suppliers, and be responsible for closing the loop of root cause corrective/preventative actions at Supplier

REQUIRED QUALIFICATIONS

• Bachelor’s degree in supply chain, engineering, or related technical field
• 12+ years of experience in supplier quality and industrialization within a manufacturing environment
• Experience with specific category technical expertise, as applicable, composites and thermoplastics manufacturing, IPC standards, CAD, GD&T
• Ability to travel at least 50% of the time
• Ability to relocate, if not already local to be onsite in McHenry, MS
• Ability to be eligible and maintain a U.S. clearance

PREFERRED QUALIFICATIONS

• Bachelor’s degree in mechanical or metallurgical/materials engineering, or related technical field
• Previous experience in defense, aerospace, automotive, high tech, or another related industry
• Strong understanding of quality systems, standards, and certifications
• Familiarity with developing high-tech products in a high-mix, low-volume environment
• Exposure to working in a fast-pace, start-up environment
• Excellent communication, negotiation, and problem-solving skills

Anduril’s Rocket Motor Systems group is seeking a Program Quality Engineer to join our team in McHenry Mississippi. The Rocket Motor Systems team designs, develops, and manufactures next-generation solid rocket motors for defense and space applications at Anduril.

As a Sr. Program Quality Engineer, you will work inside and outside the organization to define and execute processes that deliver reliable products. The right person for this role has expert knowledge of manufacturing, quality assurance, and quality planning, with drive for continuous improvement. If you are someone who loves to build world-class Quality processes, work hands-on in a fast-paced, collaborative environment, and be accountable for results, then this role is for you.

WHAT YOU’LL DO

• Lead the implementation and management of specific customer quality flow down requirements throughout the contract lifecycle, including supplier flow down.
• Lead the creation of Program Quality Plans to support administration of customer and internal quality requirements to Anduril program teams and supply base.
• Lead the development of Product Control Plans (PCP) and Inspection Plans (IP) to support program-specific requirements.
• Support supplier, customer, and internal audit activities.
• Support cross-functional team using structured problem-solving Root Cause Analysis (RCA) methodologies to identify Corrective and Preventative Actions (CAPA) and drive continuous improvement.
• Support program-specific nonconformance management and material review board (MRB) activities.
• Support, conduct, and/or monitor product and process assessments.
• Support the review and administration of customer deliverable data package content to ensure As-Built Configuration List (ABCL) and other contract deliverable requirements are met.
• Support Qualification Testing and First Article Inspection (FAI) activities.
• Support supply base capability and risk assessments and monitoring supplier performance.
• Support Engineering Change Control Board (CCB) activities.
• Interface with program management, customers, suppliers, cross-functional leadership, and, when applicable, government representatives and Defense Contract Management Agency (DCMA).
• Provide Quality and technical support for development of production readiness information, including component verification, test article acceptance testing surveillance, control of nonconforming material life cycle, utilizing measures and metrics to identify trends and drive continuous improvement.
• Provide quality inputs to support internal and external program reviews.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in engineering (Aerospace, Mechanical, Electrical, Industrial, or Manufacturing), Quality Management, or a related technical field.
• 3+ years of progressive experience in Quality Engineering, with a significant portion in a Program Quality or Supplier Quality role within the aerospace, defense, automotive, or other highly regulated hardware development and manufacturing industries.
• Demonstrated expertise in interpreting and implementing industry quality standards (e.g., AS9100, ISO9001) and customer-specific flow-down requirements.
• Strong proficiency in quality tools and methodologies including Root Cause Analysis (RCA), Corrective and Preventative Actions (CAPA), Nonconformance management, FAI (AS9102), GD&T, Control Plans, and Inspection Plans.
• Experience with Production Part Approval Process (PPAP) or equivalent qualification methodologies.
• Ability to read and interpret complex engineering drawings, specifications, and contractual documents.
• Excellent communication, interpersonal, and presentation skills, with the ability to influence and collaborate effectively across all levels of an organization and with external stakeholders.
• Proven ability to lead, drive initiatives autonomously, and make sound decisions in a fast-paced, dynamic environment.
• Must be able to obtain a Federal Explosives License through the BATFE.
• Must be able to obtain and maintain a U.S. Security Clearance.
• Ability to travel up to 25%.

PREFERRED QUALIFICATIONS

• Master’s degree in engineering or related technical discipline or 7+ years of quality engineering experience.
• Relevant certifications (e.g., ASQ Certified Quality Engineer (CQE), ASQ Certified Quality Auditor (CQA), Lean Six Sigma Green (LSSGB) or Black Belt (LSSBB), Project Management Professional (PMP), AS9100 Certified Lead Auditor).
• Direct experience interfacing with government representatives such as DCMA (Defense Contract Management Agency) Quality Assurance Representatives.
• Proficiency with ERP/MRP systems (e.g., Oracle) and PLM software.
• Experience as a Project Manager.
• Experience with statistical process control (SPC) and advanced statistical analysis.
• Experience creating quality plans, product control plans (PCP), and inspection plans (IP) from internal and external requirements.

ABOUT THE TEAM

Anduril’s Rocket Motor Systems team is seeking a Staff Controls Engineer to join our team. The Rocket Motor Systems team is designing and commissioning automated equipment for high rate production of Solid Rocket Motors at our plant in McHenry, MS. In this role, you will design, commission, and upgrade control systems for Solid Rocket Motor production equipment.

WHAT YOU’LL DO

• Design, commission, and upgrade control systems for Solid Rocket Motor production equipment
• Architect, write, and debug Siemens PLC code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for high-volume manufacturing applications
• Generate and enforce internal standards for control systems architectures, regulatory compliance, and safety buyoffs
• Integrate internal and external FactoryOS software into automation equipment and production lines
• Lead root cause analysis and corrective actions for automation failures, ensuring rapid resolution and long-term reliability
• Install, configure, and tune servo drives / VFDs
• Partner with cross-functional teams to troubleshoot equipment issues, reduce downtime, and drive continuous improvement initiatives

REQUIRED QUALIFICATIONS

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering, Electrical Engineering
• 12+ years of experience in controls and automation in a production environment
• Expert in Siemens PLC programming (Ladder and Structured Text)
• Proficient in servo drive and VFD configuration, PID tuning, STO/SS, etc.
• Strong knowledge of ethernet based communication protocols (ProfiNET, ProfiSAFE, Ethernet IP.)
• Proficient with electrical component selection and a solid foundation of wire sizing, circuit protection, and heat management in control cabinets.
• Experience integrating with SCADA and OT Networking
• Must be a U.S. Person due to required access to U.S. export-controlled information or facilities
• Experience with performing Risk Assessments and Controls Safety Design
• Proficient with pneumatic concepts and design
• Familiar with NFPA70e electrical safety practices
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 15+ years of experience in controls and automation in a production environment
• Experience working in an energetics facility
• Experience with control panel layout, electrical component selection, and cable routing
• Electrical troubleshooting up to 600VAC
• TUV FS Engineer certification (Functional Safety of Machinery)

• Assisting in the test planning process.
• Researching and implementing industry standards.
• Performing materials testing and solid rocket motor testing.
• Conducting data reduction and analysis.
• Providing status updates to leadership and customers.

• Bachelor’s degree in mechanical engineering or equivalent degree OR significant experience in data acquisition and sensor integration. 
• Minimum 0-4 years of professional experience.
• Ability to learn and apply concepts quickly.
• Proficiency in Excel, Word, PowerPoint, and programming.
• Strong communication skills.
• Strong technical writing skills.
• Ability to work alone and in a team.
• Eligible to obtain and maintain an active U.S. Secret security clearance

• Familiarity with National Instruments DAQ systems and LabVIEW.
• Experience with load cells, pressure transducers, strain gauges, thermocouples, etc.
• Experience with solid rocket motors, hybrid rocket motors, or liquid rocket engines.
• Experience with handling of energetic or hazardous materials.
• Strong problem-solving and troubleshooting skills.

ABOUT THE TEAM

Anduril’s Rocket Motor Systems team is seeking a Senior Controls Engineer to join our team. The Rocket Motor Systems team is designing and commissioning automated equipment for high rate production of Solid Rocket Motors at our plant in McHenry, MS. In this role, you will design, commission, and upgrade control systems for Solid Rocket Motor production equipment.

WHAT YOU’LL DO

• Design, commission, and upgrade control systems for Solid Rocket Motor production equipment
• Architect, write, and debug Siemens PLC code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for high-volume manufacturing applications
• Generate and enforce internal standards for control systems architectures, regulatory compliance, and safety buyoffs
• Integrate internal and external FactoryOS software into automation equipment and production lines
• Lead root cause analysis and corrective actions for automation failures, ensuring rapid resolution and long-term reliability
• Install, configure, and tune servo drives / VFDs
• Partner with cross-functional teams to troubleshoot equipment issues, reduce downtime, and drive continuous improvement initiatives

REQUIRED QUALIFICATIONS

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering, Electrical Engineering
• 8+ years of experience in controls and automation in a production environment
• Strong in Siemens PLC programming (Ladder and Structured Text)
• Proficient in servo drive and VFD configuration, PID tuning, STO/SS, etc.
• Strong knowledge of ethernet based communication protocols (ProfiNET, ProfiSAFE, Ethernet IP.)
• Proficient with electrical component selection and a solid foundation of wire sizing, circuit protection, and heat management in control cabinets.
• Experience integrating with SCADA and OT Networking
• Must be a U.S. Person due to required access to U.S. export-controlled information or facilities
• Experience with performing Risk Assessments and Controls Safety Design
• Proficient with pneumatic concepts and design
• Familiar with NFPA70e electrical safety practices
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 10+ years of experience in controls and automation in a production environment
• Experience working in an energetics facility
• Experience with control panel layout, electrical component selection, and cable routing
• Electrical troubleshooting up to 600VAC
• TUV FS Engineer certification (Functional Safety of Machinery)

The Rocket Motor Systems group designs, develops, and manufactures next-generation solid rocket motors for defense and space applications at Anduril.  We are seeking a highly skilled Lead Maintenance Engineer with an electrical focus to support and lead maintenance operations within a high-performance manufacturing environment. This role is ideal for a certified electrician with strong industrial experience and working knowledge of HVAC systems who is ready to take on a leadership role. You will play a critical part in ensuring equipment reliability, safety compliance, and operational uptime across both production equipment and facility systems.

WHAT YOU'LL DO

• Lead and support a team of maintenance technicians and electricians
• Troubleshoot and repair electrical systems, including:
• 3-phase power (208V, 240V, 480V)
• Motors, VFDs, PLCs (Allen-Bradley/Rockwell preferred)
• Control panels and instrumentation
• Maintain and improve critical production equipment such as mixers, dosing systems, cure systems, and inspection equipment
• Support facility systems, including electrical distribution and HVAC (Daikin or similar systems)
• Plan and execute preventive maintenance (PM) and drive reliability improvements
• Lead root cause analysis (RCA) to reduce downtime and improve system performance
• Ensure compliance with LOTO, OSHA, and NFPA 70E safety standards
• Support equipment installation, upgrades, and commissioning projects
• Work closely with operations and engineering teams to prioritize and execute work
• Utilize CMMS to manage work orders and maintenance tracking

REQUIRED QUALIFICATIONS

• Certified Electrician (Journeyman or Master Electrician preferred)
• 5+ years of experience in industrial or manufacturing maintenance
• Strong hands-on experience with:
  • 3-phase electrical systems
  • Motor controls and troubleshooting
  • PLC basics and control systems
• Proven ability to lead or mentor others in a maintenance environment
• Strong understanding of electrical safety and LOTO procedures
• Ability to read and interpret schematics and technical documents

PREFERRED QUALIFICATIONS

• HVAC certification (EPA Section 608) or hands-on HVAC experience
• Experience in high-safety or regulated environments (e.g., chemical, aerospace, energetics)
• Experience with VFDs, instrumentation, and automation systems
• Familiarity with CMMS systems

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

We are looking to bring on a Electrical Test Engineer to design and deliver test systems for Anduril’s electronic products. This person will work with the test of the organization to identify gaps in test coverage and own the design and delivery of the hardware and software test solution.

WHAT YOU'LL DO

• Work on a Electrical Test Engineering team that owns/defines for new products and new features, in collaboration with firmware, software, and hardware design teams
• Determine test strategies that optimize product safety, product reliability, risk mitigation, FMEA coverage, and schedule
• Design and execution of PCBA and electrical system components with hands on testing and rework as necessary
• Data analysis and clear communication of results and collaboration with design engineers to resolve any product problems found via test
• Design and implement next generation test automation hardware systems to facilitate fast and repeatable testing of product
• Manage purchasing, build, integration and final commissioning of functional testers
• Develop test procedures and test automation from component level to system level
• Support board bring-up and bench validation as needed
• Support Design Engineer with DFT, provide feedback from test results to improve quality and test coverage
• Support manufacture test bring-up and yield
• Support quality field failure analysis
• Familiarity with measurement analysis techniques such as Gage RR and Process Capability Analysis

REQUIRED QUALIFICATIONS

• Bachelor’s Degree or Master’s Degree in Electrical Engineer or equivalent
• 3+ years of experience designing functional test equipment and PCBAs
• Experience in Schematic Capture and PCBA layout.
• Knowledge of scripting language to develop automation. Python, Matlab, PERL or SHELL. (Experience in LabVIEW is a value, but less required)
• Instrument control using VISA and SCPI
• Understanding of peripherals and developing test and validation strategies
• Experience with computer hardware communication bus protocols: USB, I2C, I2S, CSI, Ethernet, SPI, PCIe, HDMI, CAN, etc
• Understanding of memory hierarchy and developing test and validation strategy
• Understanding of Product Release Cycle from prototype to production and key deliverables of each phase
• Collaborate with a cross-functional team to support product development from prototype to production
• Experience with hands-on electrical engineering work

PREFERRED QUALIFICATIONS

• NI TestStand experience
• Understanding both hardware and software integration and test process
• Advance proficiency in MS Word, Excel, PowerPoint and VISIO
• Understanding of lab safety protocols when working in all types of lab environment
• A detail-oriented individual who strives in an environment that values effective team collaboration
• Self-motivated: Demonstrate ability to set direction and proactively identify and fills gaps where needed

ABOUT THE JOB

Anduril is a defense technology company, bringing the best technology talent and funding to the defense sector. Our technology helps our customers solve their toughest challenges by enabling them to make better, more informed decisions in life-and-death situations. We’ve assembled a diverse team of experts in electromechanical hardware, artificial intelligence, computer vision, sensor fusion, optics, and data analysis that are creating software and hardware solutions to radically evolve the capabilities of our defense force customers. If you are passionate about solving problems that have real impact, come join Anduril and build the future of defense.

Anduril is looking for an experienced Environmental, Health, and Safety (EHS) Specialist to support the development and implementation of EHS efforts. This role will ensure the facility and employees are compliant with all applicable EHS and defense standards.

WHAT YOU'LL DO

• Assist in all environmental permitting and testing efforts
• Coordinate with and serve as the main point of contact for local, state, and federal regulatory agencies (i.e. DEQ, EPA)
• Establish and maintain compliance with the EPA’s RMP program
• Establish and maintain adherence to waste management protocols
• Develop safety procedures, permits, and reports
• Develop, perform, and document safety inspections
• Assist with environmental and safety compliance audits and follow through with corrective actions
• Conduct training and safety performance field assessments
• Assist with hazard identification and risk assessments in operational areas
• Analyze incident trends and use risk assessment methods to identify improvement opportunities
• Provide on-site health and safety compliance support
• Perform other duties as assigned

REQUIRED QUALIFICATIONS

• Bachelor’s degree in EHS or a related field of study
• 3+ years of experience implementing and overseeing EHS programs within a manufacturing environment
• Demonstrated ability in conducting audits and inspections of all aspects of EHS
• Strong current knowledge of local, state, and federal EHS regulations or proven ability to quickly learn such material
• Experience obtaining local, state, and federal environmental permits
• Experience with hazard communication and incident investigations
• Experience using Microsoft applications
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Experience working at a PSM/RMP regulated facility
• Experience working in an energetics manufacturing facility
• Experience with EPA, OSHA, DEQ, and ISO 14001 and/or 45001