Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Maternal Leave
• Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Demonstrate proficiency in Building Automation Systems (BAS), Entrata and CMMS systems for timely logging of service requests and completed work.
• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s standards.
• Perform physically demanding work to maintain the asset, and other property features to minimize liability concerns.
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems such as: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot- & cold-water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted power supply (UPS), elevators and lifts, parking structures (ventilation/drainage systems, T-Joints), entrance & exit gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, and insulated glass units (IGUs).
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire dampers.
• Assist in creating emergency and disaster preparedness plans and protocols.
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as needed.
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Supervisor.
• Coordinate maintenance objectives and daily assignments with the Supervisor.
• Diagnose and perform routine maintenance/repair in a timely and professional manner.
• Assure all service requests are completed daily.
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of completion.
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident trust.
• Inspect vacated apartments and record necessary repairs and maintenance, informing the Facilities Supervisor of needed services and repairs.
• Routinely perform duties including basic appliance repair, general carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the General Manager/Property Manager.
• Routinely inspect interior common areas and the exterior of the property, ensuring daily upkeep of all common areas with company standards, and all the light fixtures are in working order.
• Complete preventive maintenance tasks on all equipment and operating systems to ensure warranty compliance and extended useful life.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as assigned.
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and safe. 
• Maintain parts and supply inventory, as authorized.
• Clean and organize the workshops, storerooms, boiler rooms, and utility rooms.
• Clean pools; adjust and maintain chemicals to proper levels, if needed.
• Pressure-wash sidewalks, buildings, pool decks, etc.
• Assist in snow removal at property, as required.
• Assume responsibility for after-hours emergencies at the direction of the company supervisor/manager.
• Undertake training related to job duties as deemed necessary.

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

The Rocket Motor Systems group designs, develops, and manufactures next-generation solid rocket motors for defense and space applications at Anduril.  We are seeking a highly skilled Lead Maintenance Engineer with an electrical focus to support and lead maintenance operations within a high-performance manufacturing environment. This role is ideal for a certified electrician with strong industrial experience and working knowledge of HVAC systems who is ready to take on a leadership role. You will play a critical part in ensuring equipment reliability, safety compliance, and operational uptime across both production equipment and facility systems.

WHAT YOU'LL DO

• Lead and support a team of maintenance technicians and electricians
• Troubleshoot and repair electrical systems, including:
• 3-phase power (208V, 240V, 480V)
• Motors, VFDs, PLCs (Allen-Bradley/Rockwell preferred)
• Control panels and instrumentation
• Maintain and improve critical production equipment such as mixers, dosing systems, cure systems, and inspection equipment
• Support facility systems, including electrical distribution and HVAC (Daikin or similar systems)
• Plan and execute preventive maintenance (PM) and drive reliability improvements
• Lead root cause analysis (RCA) to reduce downtime and improve system performance
• Ensure compliance with LOTO, OSHA, and NFPA 70E safety standards
• Support equipment installation, upgrades, and commissioning projects
• Work closely with operations and engineering teams to prioritize and execute work
• Utilize CMMS to manage work orders and maintenance tracking

REQUIRED QUALIFICATIONS

• Certified Electrician (Journeyman or Master Electrician preferred)
• 5+ years of experience in industrial or manufacturing maintenance
• Strong hands-on experience with:
  • 3-phase electrical systems
  • Motor controls and troubleshooting
  • PLC basics and control systems
• Proven ability to lead or mentor others in a maintenance environment
• Strong understanding of electrical safety and LOTO procedures
• Ability to read and interpret schematics and technical documents

PREFERRED QUALIFICATIONS

• HVAC certification (EPA Section 608) or hands-on HVAC experience
• Experience in high-safety or regulated environments (e.g., chemical, aerospace, energetics)
• Experience with VFDs, instrumentation, and automation systems
• Familiarity with CMMS systems

Fairstead is hiring a Maintenance Technician to maintain the day-to-day operations and assume responsibility for maintaining the property's physical assets. 

RESPONSIBILITIES: 

• Inspect buildings and equipment regularly for needed repairs and improvements. 

• Perform necessary preventative maintenance and repairs on the property as needed.  

• Implement maintenance policies and standards to prevent misuse of property appliances.  

• Ensure that properties are safe and avoid any danger to their occupants, visitors, and workers.  

• Clean and prepare vacated buildings and rooms for new occupants to move in.  

• Check electrical wiring for accuracy and compliance with regulatory standards.  

• Check safety systems and devices for operational effectiveness monthly.  

• Participate in the on-call rotation. Respond promptly to emergency maintenance problems that may require attention outside of normal working hours.  

• Maintain an inventory of supplies, tools, and equipment. 

BENEFITS: 

• Generous employer contribution for Medical Insurance through Meritain Health. 

• Employer Paid Vision Plans. 

• Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%. 

• 12+ paid Holidays. 

• 15 days of PTO. 

• 7 Sick days. 

• Employer Paid Life Insurance. 

• Flexible Spending Account. 

• Nationwide Pet Insurance. 

• Disability Insurance. 

• Laser Correction Discount. 

• Employee Discounts on appliances, apparel, and more. 

QUALIFICATIONS: 

• Mechanical skills to handle minor repairs and fixtures.  

• Knowledge of electricity to diagnose electrical problems and carry out minor repairs.  

• General maintenance skills.  

• Verbal and written communication skills for effective delivery of information.  

• Prior experience as a Service Technician or in a similar role.  

• HVAC, CMRP, or equivalent certification preferred.  

• Ability to stand for extended periods.  

• Ability to lift to 70 pounds without assistance.  

• Dexterity and attention to detail.