Who We Want:

The Production Operator is responsible for loading component parts into automated assembly while adhering to quality and efficiency standards.

What You'll Do:

• Utilize PLEX to load inventory to the cell, load components, record production, pack per instruction, make labels and document issues with parts or machinery.
• Escalate down machinery, and poor-quality parts to Team Leaders and/or Supervisors.
• Ensure that all products comply with check sheets and work instructions.
• Document inspection results, and non-conformances.
• Maintain a clean and organized work area.
• Support internal and external audits as needed.
• Continuously identify opportunities for quality and process improvements.
• Cross train on various work centers as required
• All other duties as assigned

When and Where:

This will be a 1st Shift / 6am - 2:30pm M-F (over time as needed) position located at our Plant in Kansas City, MO. 

Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests. 

What You Need to Have:

• Must be 18 years of age or older
• High school diploma or equivalent.
• Able to stand for 8-10 hours a day and be physically capable of performing the essential functions of the position, with or without reasonable accommodation.
• Ability to read, write, speak, and understand English at a level sufficient to safely and effectively perform job duties, including following work instructions, safety procedures, and company communications.
• 6 months of manufacturing experience preferred.
• Strong attention to detail and ability to detect defects.
• Ability to read and interpret operator instructions, inspection check sheets, and quality alerts.
• Basic computer skills for data entry.
• Good verbal and written communication skills.
• Ability to work independently and as part of a team.
• Ability to stand for extended periods.
• May require lifting up to 30 pounds.
• Manual dexterity and visual acuity required

Aviation Project Engineer 

We are looking to hire an Aviation Project Engineer. We offer opportunities to work on a variety of complex local airport agency and private clients. The ideal candidate will have a minimum of 5 years’ experience and hold a PE. 

Location

This position will have a hybrid work schedule and when in the office could work out of any of the 45 Benesch locations. The following locations have an aviation team and or focus on aviation business development:  Atlanta, GA, Denver, CO, 4 locations throughout Nebraska (Bellevue, Grand Island, Lincoln, Omaha) and 4 locations throughout Kansas (Kansas City, Wichita, Topeka, Manhattan), and Kansas City, MO. Remote work will be considered. 

The Impact You Will Have

• Design responsibility for elements such as pavement, drainage, utilities, lighting/NAVAIDS, security and fuel facilities
• Responsible for project design calculation files, ensuring adequate independent quality control reviews
• Manage the process of compiling and coordinating plans, specifications, cost estimates and pay items
• Coordinate and review drafting and the assembly of plan sets
• Develop and oversee task work plans for assigned team members
• Engage in active team communication
• Organize technical meetings among design staff
• Perform occasional field construction observation, sometimes requiring out-of-town travel
• Active involvement in professional organizations

What You Will Need

• Bachelor's degree in Civil Engineering or related discipline required
• Experience with FAA design standards
• P.E. license or planning to obtain license in near future
• Demonstrate advanced use of CADD
• Excellent communication skills, verbal and written
• Ability to perform complex analysis and design
• Ability to assemble a complete design package for assigned elements or projects
• Ability to work effectively in a team environment

  #LI-OS1  

Who We Want:

The Quality Engineer is responsible for conducting on going analysis of the production process inputs and output to ensure that customer (internal and external) quality requirements are being achieved. 

What You'll Do:

• “Safe Launch” participant to constructively accept a detailed hand-off of product requirements from APQP QE.
• The “Safe Launch” hand-off process links the APQP QE and Current Production QE when the first MRD parts are being run. These QEs work together to obtain and complete the necessary quality system documentation, dimensional data, GP-12 support, and PTR/MRD packaging and labeling for shipment.
• Supporting the “Safe Launch” process also includes providing the plant communication linkage for a formal tooling buy-off process, including Run at Rate support and associated documentation to declare die/welder readiness for production. This is then followed by the preparation of all PPAP documentation for submission.
• Responsible for all plant level quality concerns for assigned product.
• Serve as direct point of contact for customer complaints.
• Manage Quality System for all changes after launch.
• Obtain “Master Samples” from 300-piece initial production run for Program archiving of Part Quality at start of production.
• Update Control Plans & FMEA as Issues Arise from the Floor or Customer.
• Issue Product Quality Check Deviations following direction from management.
• Provide timely acknowledgement responses to customer complaints.
• Provide formal documentation PRR/HTR, responses to the customer.
• Be a presence at the assembly plants to provide face-to-face interaction and ensure customer satisfaction while developing relationships.
• Understand how each part is utilized in the vehicle build and become the “expert” regarding what the customer expects from us as the supplier of this part.
• Provide the plant management with the “voice of the customer” and explain what key part attributes are important to manage on each part and why.
• Train plant level quality auditors and production team leaders on part-to-part concerns regarding acceptability, inspection methodology, and customer expectations.
• Direct Quality Technicians to provide supporting product quality documentation (Part Picture Visuals, Packaging Instructions, Gage Instructions, Quality Alerts, etc.), and floor support, as necessary.
• Provide plant with priorities for part improvement to ensure the most important attributes are addressed first, and stress continuous improvement.
• Address plant floor quality concerns as they arise, provide timely opinions for acceptability, and be able to provide the proper decision criteria for management to direct the part disposition.
• Champion problem control meetings for customer complaints, and attendees need to be accountable for their problem control responsibilities by area managers.
• The QE should be involved in monitoring daily part quality and spend time on the floor checking parts and auditing product and process to verify that customer requirements are met.
• Participate in the layered process audits.
• Implement new methods of inspection and control when required. (i.e.: enhanced containment techniques and documentation, SPC data, scheduled CMM runs or Roamer scans, etc.)
• The QE is responsible for supporting all QSB+ and TS requirements associated with his/her assigned part responsibilities.

When and Where:
This will be a 1st Shift / 7:30AM-4:30PM M-F position located at our Plant/Corporate Office in Kansas City, Missouri 
Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests.

What You Need to Have:

• Associate degree from a 2- or 4-year college
• 5 Years in related experience and/or training
• Equivalent combination of education and experience
• Bachelor’s Degree from a 4-year college or university
• Equivalent combination of education and experience
• Has high standards of performance for self.
• Takes responsibility for actions, results, and mistakes.
• Is thorough, accurate, and reliable when performing and completing job tasks; demonstrates honesty and integrity in all aspects of work.
• Takes positive action to objectively resolve conflict by listening, staying focused on issue to find resolution, and monitoring progress.
• Maintains positive relationships by constructively resolving conflicts.
• Uses feedback from others to continuously improve performance and work relationships.
• Moves within own and/or other work areas (flexes) to support plant flow.
• Works with sense of urgency to meet needs of customers.
• Has necessary experience, skills, and knowledge to perform all aspects of job; rotates through all job responsibilities.
• Maintains knowledge and skills to perform job effectively.
• Has ability to focus on benefits of change and see it as positive; approaches change or newness in constructive/objective manner; views change as learning opportunity.
• Looks for good in others; works collaboratively with others; shares information and knowledge.
• Is at work when scheduled and ensures coverage when absent; takes timely breaks/lunches; uses time wisely.
• Advance GD&T training
• Understanding of the Specific Customer Requirements
• Understanding the PPAP Process
• Understanding of the APQP Process
• Understanding of dimensional data and the ability to analyze and make decision
• Understand problem solving and all the involved core tools
• Communication written and verbal

Who We Want:

Responsible for troubleshooting, maintaining and improvement of highly automated controls, robotic and welding systems.

What You'll Do:

• As needed design and program PLC, HMI, robots and other types of electronic or electrical manufacturing equipment.
• Lead in the trouble shooting of malfunctioning equipment.
• Continuous improvement activities such as cycle time reduction, standardization of existing equipment and incorporation of error proofing strategies.

When and Where:
This will be a 1st Shift / 6 AM - 3 PM M-F position located at our Plant in Kansas City, MO. 
Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests.

What You Need to Have:

• Bachelor’s degree in Engineering or related field required
• Minimum of 2 years’ experience with Rockwell software and AB CompactLogix, Guard Logix, PanelView plus platforms.
• Electrical knowledge: Install hardware and wiring,
• Technical Skills: Program and debug of automated robotic welding, sealing, fastening and assembly systems.
• Able to program Panel View (HMI) and PLC.
• Creative Thinking: Effective problem solving and troubleshooting skills
• Attention to Detail: Able to manage project details to ensure perfect quality in work output.
• Communication Skills: Excellent verbal and written communication skills
• Teamwork Skills: Able to work collaboratively with different team members and different levels of the organization (internal and external)
• Computer Modeling: Able to utilize computer aided modeling to ensure that workout meets the needs of the customer (internal and external)
• Has high standards of performance for self. Takes responsibility for actions, results, and mistakes.  Is thorough, accurate, and reliable when performing and completing job tasks; demonstrates honesty and integrity in all aspects of work.
• Takes positive action to objectively resolve conflict by listening, staying focused on issue to find resolution, and monitoring progress. Maintains positive relationships by constructively resolving conflicts.
• Uses feedback from others to continuously improve performance and work relationships.
• Moves within own and/or other work areas (flexes) to support plant flow. Works with sense of urgency to meet needs of internal and external customers.
• Has necessary experience, skills, and knowledge to perform all aspects of job; rotates through all job responsibilities. Maintains knowledge and skills to perform job effectively.
• Has ability to focus on benefits of change and see it as positive; approaches change or newness in constructive/objective manner; views change as learning opportunity.
• Looks for good in others; works collaboratively with others; shares information and knowledge.
• Is at work when scheduled and ensures coverage when absent; takes timely breaks/lunches; uses time wisely.

What You'll Do:

• Troubleshoot, maintain and repair dies, die components, and tooling used in the production process. 
• Analyze specification, lay out metal stock, and set up and operate machine tools to make and repair dies.  
• Troubleshoot, maintain, and repair dies, die components, and tooling used in the production process. Analyzes specifications, lays out metal stock, and sets up and operations machine tools to make and repair dies.
• Studies specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts.
• Computes dimensions, plans layout, and determines assembly method and sequence of operations. 
• Measures, marks, and scribes metal stock for machining
• Sets up and operates machine tools such as lathes, milling machine, shaper, and grinder, to machine parts, and verifies conformance of machined parts to specifications.
• Lifts machined parts and positions and secures parts on surface plate or worktable. 
• Smooths flat and contoured surfaces using power grinders and fits and assembles parts together and into assemblies and mechanisms. 
• Verifies dimensions, alignments, and clearances
• Heat treats tools or parts
• Examines standard or previously used dies, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part. 
• Troubleshoot tooling analysis and resolve problems to obtain quality level of parts. 
• Follow all safety precautions and company policies to prevent injury to self and others. 
• Utilize calipers, micrometers, gauge pins and blocks, various other types of measurement equipment

When and Where:

This will be located at our Plant in Kansas City, MO. 

Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests. 

What You Need to Have:

• Must be able to obtain a hi-lo license. 
• Minimum of four years’ experience with approved trade school or 8 years’ experience
• Must be physically capable of performing the essential functions of the position, with or without reasonable accommodation. 

Who We Want:

The Production Operator is responsible for loading component parts into automated assembly while adhering to quality and efficiency standards.

What You'll Do:

• Utilize PLEX to load inventory to the cell, load components, record production, pack per instruction, make labels and document issues with parts or machinery.
• Escalate down machinery, and poor-quality parts to Team Leaders and/or Supervisors.
• Ensure that all products comply with check sheets and work instructions.
• Document inspection results, and non-conformances.
• Maintain a clean and organized work area.
• Support internal and external audits as needed.
• Continuously identify opportunities for quality and process improvements.
• Cross train on various work centers as required
• All other duties as assigned

When and Where:

This will be a 2nd Shift / 3pm - 11:30pm M-F (overtime as needed) position located at our Plant in Kansas City, MO. 

Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests. 

What You Need to Have:

• Must be 18 years of age or older
• High school diploma or equivalent.
• Able to stand for 8-10 hours a day and be physically capable of performing the essential functions of the position, with or without reasonable accommodation.
• Ability to read, write, speak, and understand English at a level sufficient to safely and effectively perform job duties, including following work instructions, safety procedures, and company communications.
• 6 months of manufacturing experience preferred.
• Strong attention to detail and ability to detect defects.
• Ability to read and interpret operator instructions, inspection check sheets, and quality alerts.
• Basic computer skills for data entry.
• Good verbal and written communication skills.
• Ability to work independently and as part of a team.
• Ability to stand for extended periods.
• May require lifting up to 30 pounds.
• Manual dexterity and visual acuity required