Position Overview

Woolpert is hiring a Roadway Engineer to join our dynamic Transportation Team at one of Ohio office. This position reports to the Roadway Engineer and is responsible for projects spanning multiple states, multiple clients and presenting unique challenges. Given the wide range of projects and clients, our engineers are exposed to a number of different practices which allow them to not only become well rounded, but also to find a specialty they have interest in. While work is usually related to transportation, engineers regularly work in disciplines outside of the standard transportation roles. These can include work with aviation, military, private development as well as bikeways and trails. 

We are unable to provide visa sponsorship for this position.  Applicants must already possess work authorization in the country the job is located.

Qualified candidates may be eligible for a signing bonus of up to $5,000, based on experience and role alignment. Bonus eligibility is contingent upon 12 months of service and must be repaid if the employee leaves the company within one year of hire.

What You Will Do:

• Work as part of a diverse design Team to provide design services across a variety of practices.
• Lead design or help design complex roadway and transportation projects that require creative solutions. Projects include roadway, bikeways, pedestrian facilities, roundabouts, trails, multi-modal transportation or transportation planning.
• Perform engineering design tasks such as highway and street design, roadway alignments, roundabout design, roadway grading and modeling, curb ramp design, signing and pavement plan, maintenance of traffic, storm drainage.
• Use local and federal roadway standards to prepare preliminary and final design documents, cost estimates, and bid documents.
• Perform designs using software including Microstation, OpenRoads Designer (ORD), AutoCAD, and/or Civil 3D.
• Assist Project Managers in the writing of proposals as well as preparing scope, schedule and budget of projects

What You Will Bring:

• BS in Civil Engineering or related technical design field.
• A minimum of 4 years of professional experience required.
• Licensed PE in Ohio, or has the ability to obtain within one year of employment.
• Experience in Roadway, Highway, Trail, Bikeway/Pedestrian and/or Roadway Drainage design.
• Proficiency in Civil 3D and/or Microstation OpenRoads Designer (ORD).
• Experience with DOT projects is preferred.
• Possess strong organizational skills to successfully manage multiple priorities.
• Be committed to team efforts and be willing to act independently.
• Good communications skills, including oral and written communication.
• Proficiency with Microsoft Office (Word, Excel)

#LI-AT1

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

We are looking for a Staff Software Engineer to join our Engineering team.

What you’ll do:

• Architect resilient software components within a distributed Python and C environment (K8s, EKS, EC2, Lambda, RDS, etc). 
• Take full ownership for solving complex problems from inception to execution. 
• Drive team and organization strategy with minimal guidance, ensuring technical decisions directly support company goals.
• Proactively identify and resolve technical debt or process friction, simplifying the codebase and developer experience to improve team velocity.
• Coach and mentor engineers, to build a high-performance culture. Serve as a subject matter expert who remains approachable.
• Proactively communicate, identify and mitigate technical risks, navigating trade-offs between system constraints and business impact. 
• Build trust with functional leaders and stakeholders, communicating highly technical concepts into clear dialogue to gain alignment on priorities.
• Work with Python and C applications  to resolve wide-ranging issues, and drive feature implementation. 

What you’ll need:

• Bachelor's Degree in Computer Science or related field.
• 6+ years programming experience, ideally on a modern stack.
• Experience: 4+ years of experience writing high-quality, production-grade Python.
• Hands-on experience with Continuous Delivery principles and techniques, including unit testing and build & deploy pipelines.
• Ability to lead and influence a team's technical direction.
• Hands-on experience with AWS or similar cloud technologies (RDS, Aurora, Dynamo, EKS, or Lambda) and Kubernetes.
• Demonstrated ability to design resilient software components within a distributed system.
  
  

Nice to have:

• Familiarity with Python Flask and/or FastAPI frameworks.
• Experience developing in C.
• Domain knowledge in Payment Systems or financial tech.
  
  

At IEM, we’re not just building innovative electrical distribution systems, we’re shaping the future. IEM is dedicated to delivering world-class solutions for complex power needs. After 75 years, we continue to push the boundaries of what’s possible. Whether you’re an experienced professional or just starting out, you’ll have the opportunity to contribute, grow, and make a lasting impact on industries that power the world’s most dynamic markets.

IEM is currently seeking a Quality Systems Technician for our Jacksonville FL. locations and will report into the Quality Systems Leader. The Quality Systems Technician plays a key role in supporting the development, implementation, and maintenance of digital quality systems, smart tools, and quality infrastructure. Reporting to the Lead Quality Systems Engineer, this role focuses on setting up systems, troubleshooting technical issues, and enabling the smooth integration of quality processes within manufacturing operations.

Please note: This position requires 100% in-office presence in our Jacksonville offices and does not offer remote work.

Key Responsibilities:

• Support the setup, configuration, and validation of quality systems, including smart tools, AI cameras, and digital inspection devices.
• Assist in troubleshooting issues related to EQMS platforms, smart inspection systems, and quality data capture tools.
• Work with engineering, IT, and quality teams to integrate new tools and systems into production processes.
• Help build and maintain process flows, control plans, and digital documentation related to quality system infrastructure.
• Support the digitization, automation, and standardization of quality and traceability records, including inspection data, testing logs, serialization records, and process verification checkpoints.
• Contribute to the creation and refinement of standard operating procedures (SOPs), work instructions, and user guides related to quality systems.
• Participate in pilot runs and process trials to validate functionality and integration of smart quality tools.
• Monitor system performance and escalate recurring issues or improvement opportunities.
• Maintain accurate documentation of setups, system changes, and configuration parameters.
• Provide technical support to shop floor users to ensure quality systems are functioning correctly.
• Assist in quality-related training sessions for new tools or systems implementation.
• Coordinate with vendors or suppliers when technical support or software updates are needed for system hardware or software.
• Perform other duties as needed to support the implementation and sustainability of quality system initiatives.
• Ability to develop & update programs and scripts for data validation, data sorting, automation, and creation of dashboards and visual reporting tools. 
• Familiarity with serialization, traceability systems, digital quality records, and manufacturing data management principles is strongly preferred.

Qualifications:

• Diploma or technical certification in Quality, Engineering Technology, Mechatronics, or a related technical field.
• 2+ years of experience in a manufacturing or engineering support role, preferably with exposure to quality or production systems.
• ⁠Experience with programming, scripting, or data visualization tools such as Python, SQL, VBA, or similar platforms is considered an asset.
• Familiarity with EQMS platforms, process automation, or smart inspection technologies is an asset.
• Strong troubleshooting and problem-solving skills in both hardware and software environments.
• Ability to read technical drawings, flowcharts, and system diagrams.
• Comfortable working in a cross-functional environment with engineering, IT, and operations teams.
• Proficient in Microsoft Office and experience with digital tools used in quality systems.
• Good communication skills and a detail-oriented mindset.
• Knowledge of lean manufacturing or six sigma principles is a plus.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization 

Working Conditions:

• Split between office and shop floor environments.
• May require light hands-on work for system setup, testing, and troubleshooting.

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

PURPOSE OF POSITION:

The purpose of the Continuous Improvement Engineer, IEM360 role is to provide high-impact support role responsible for deploying and sustaining our enterprise-wide operating system across functions and sites. Modeled on world-class systems such as the Danaher Business System and Crane Business System, IEM360 is IEM’s framework for driving continuous improvement, lean enterprise transformation, and strategic execution. The IEM360 CI Engineer partners with functional and plant leaders to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

SUPERVISORY RESPONSIBILITIES:

• This position has no direct supervisory responsibilities.
• The position requires collaboration with other roles to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

ESSENTIAL FUNCTIONS:

• Lead IEM360 Deployment: Drive the implementation of IEM Business System tools and processes across operations, supply chain, engineering, and commercial functions, ensuring alignment with strategic objectives.
• Kaizen Facilitation: Plan, lead, and coach cross-functional kaizen events focused on lean fundamentals, standard work, visual management, flow, problem-solving, and strategic growth/capacity initiatives.
• Capability Building: Develop internal capability by training and coaching team members and leaders at all levels in lean thinking, daily management, and continuous improvement practices.
• Business System Maturity: Assess business system maturity across plants and functions; create and execute improvement roadmaps using tools such as maturity models, Hoshin Kanri, tiered daily management, and KPI dashboards.
• Change Leadership: Act as a catalyst for cultural transformation, enabling teams to embrace standardization, accountability, and data-driven decision-making.
• Performance Management: Partner with site leadership to embed IEM360 into key processes such as policy deployment (Hoshin), S&OP, new product introduction, and operational reviews.
• Best Practice Sharing: Identify, document, and disseminate internal best practices. Benchmark against external best-in-class organizations and adapt appropriately for IEM.

COMPETENCIES:

• Proven ability to work independently, take initiative, and manage responsibilities with minimal supervision.
• Hands-on leader and coach; thrives on the shop floor and in frontline engagement.
• High emotional intelligence with the ability to influence without authority.
• Comfortable navigating ambiguity and building structure in evolving organizations.
• Results-driven, with a bias for action and accountability.
• Excellent verbal and written communication skills
• Strong analytical and problem-solving abilities
• Excellent interpersonal and customer service skills.
• Excellent organizational and time management skills and attention to detail.
• Proficient in Microsoft Office Suite or related software

EDUCATION AND EXPERIENCE:

• Bachelor’s degree in engineering, Business, Operations, or a related field; MBA or Master’s preferred.
• 3-5 years of experience in manufacturing, operations, or continuous improvement, preferably in a multi-site or matrixed industrial environment.
• Deep understanding of Lean principles (e.g., 5S, value stream mapping, standard work, visual management, PDCA, SMED, A3 problem-solving).
• Demonstrated success leading cross-functional kaizen events and system-wide CI initiatives.
• Understanding of basic ops finance, including P&L impact, cost drivers, and fixed vs. variable costs
• Strong facilitation, project management, and communication skills.
• Experience working in or with a formal business system (e.g., DBS, CBS, strongly preferred)
• Exceptional communication and interpersonal skills with the ability to influence stakeholders at all levels.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Willingness to travel (~25%) across IEM’s manufacturing locations.

Physical Demands: Activities: Sitting – 60% Walking/Standing – 40%

Lifting: Must be able to lift up to 20lbs.

Vision: Long periods of close work on a computer screen.

Mental Demands: Interpret, analyze, research and handle multiple tasks simultaneously.

Environment: Climate controlled office and non-climate-controlled production floor.

IEM is currently seeking a Manufacturing Engineer – Metal Fabrication (E2) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our rapidly expanding switchgear operations. This intermediate-level role involves independent execution of equipment launches, training development, and process optimization activities.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Support operator and maintenance training during equipment launch
• Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, and quality control standards
• Apply lean manufacturing principles to improve safety, ergonomics, and process stability
• Implement and maintain OEE systems to track and improve machine efficiency
• Analyze incidents and quality issues, define and implement corrective actions
• Participate in automation initiatives by employing robotic manufacturing, material handling, and inspection.
• Implement preventative maintenance programs to reduce machine down times.
• Develop standard work, SOPs, and training materials for operators and technicians
• Collaborate with operations, quality, supply chain, facilities, and EHS teams
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Must have knowledge of CNC machines, metal forming, fabrication processes, and their requirements.
• Minimum 3-year experience in a related manufacturing environment.
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Competency in GD&T required
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools (OEE, SPC, etc.)
• Experience working with CNC equipment OEMs such as Amada or similar
• Ability to manage multiple projects and assignments with high level of autonomy and accountability for results
• Knowledge of machinery design

We are seeking a Manufacturing Engineer - Early Career (E1) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our switchgear operations. This entry-level role focuses on supporting equipment commissioning, training, and early-stage process development under guidance from senior engineers.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Develop standard work, SOPs, and training materials for operators and technicians
• Support operator and maintenance training during equipment launch
• Analyze production data to identify opportunities for efficiency, quality, and throughput improvements
• Apply Lean manufacturing principles to improve safety, ergonomics, and process stability
• Collaborate with Operations, Quality, Supply Chain, Facilities, and EHS teams
• Support future equipment procurement, expansion, and optimization initiatives
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Experience in a manufacturing or process engineering environment
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Experience with metal fabrication processes and equipment
• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools

Experience working with CNC equipment OEMs such as Amada or similar

Position Summary:

IEM is currently seeking a Manufacturing Engineer (Senior-level) for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. The Manufacturing Engineer (Senior-level) is a key technical leader responsible for driving strategic initiatives and delivering robust, scalable, and cost-effective manufacturing solutions. This role oversees the development, optimization, and support of advanced manufacturing processes, with a focus on operational excellence, automation, and continuous improvement. The Manufacturing Engineer (Senior-level) will lead cross-functional efforts to implement cutting-edge technologies, ensure regulatory compliance, and achieve world-class performance in quality, safety, and throughput. This position demands deep expertise in Lean, Six Sigma, process validation, and smart manufacturing systems, as well as strong leadership and mentoring capabilities.

Key Responsibilities:

• Lead the design, development, and deployment of advanced manufacturing processes and production systems across new and existing product lines.
• Drive automation and Industry 4.0 initiatives to enable smart, data-driven manufacturing and improve operational agility.
• Serve as the technical authority in cross-functional teams involving operations, quality, R&D, and supply chain to ensure product manufacturability, scalability, and cost-effectiveness.
• Facilitate and lead high-impact kaizen events, root cause investigations (RCA), and the implementation of corrective/preventive actions (CAPA).
• Develop and maintain comprehensive documentation including process flow diagrams, SOPs, work instructions, and training guides to ensure consistency and compliance.
• Optimize production line layouts, material flow, and takt time using Lean methodologies to increase efficiency and reduce waste.
• Own and drive continuous improvement of key performance indicators (KPIs) such as yield, cycle time, scrap rate, and OEE (Overall Equipment Effectiveness).
• Lead capital project initiatives including equipment selection, procurement, commissioning, and validation (IQ/OQ/PQ).
• Ensure all processes and equipment meet applicable safety, quality, and regulatory standards (e.g., ISO, UL, OSHA, FDA as applicable).
• Champion cost reduction strategies through design for manufacturability (DFM), value engineering, and process automation.
  
  Qualifications:
• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering; Master’s degree or advanced technical certifications (e.g., Lean Six Sigma Black Belt) strongly preferred.
• 7–10+ years of progressive experience in a manufacturing engineering role, ideally within high-volume or complex electromechanical production environments.
• Proven expertise in Lean Manufacturing, Six Sigma, Standard Work, process mapping, and statistical process control (SPC).
• Proficient with CAD software, ERP systems, and manufacturing execution systems (MES); experience with digital manufacturing tools and data analytics is a plus.
• Demonstrated hands-on experience with automation systems, robotics, PLCs, machine vision, or other Industry 4.0 technologies.
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Strategic thinker with a continuous improvement mindset and a passion for driving operational excellence.

Switchgear Applications Engineer 

Location: Jacksonville, FL 

Reports To: Technical Program Manager

Salary Range:  $100,000 - $150,000 Annually

Position Summary 

As the Technical Program Application Engineer with the Commercial Enterprise team, you will report to the Technical Program Manager and work closely with both the commercial and engineering teams.

In this role, you will serve as the key technical review and product point person, ensuring the accuracy and completeness of clean orders.

Key Responsibilities 

• Review customer plans and specs for use in the RFQ and Order Entry stages, raising any discrepancies with customers through RFI process,
• Review and redline drawings, suggesting solutions or alternate designs where applicable, to ensure alignment with customer specifications and electrical regulatory body standards, for various regions.
• Respond to external RFIs in accordance with Service Level Agreements.
• Provide detailed scope of customer change requests, submit change notices and follow-up to completion and/or escalate if changes may impact beyond a specific deployment.
• Support post-delivery RFIs through customer/IEM Procore with timely responses and coordinate internal intercept plans where needed.
• Create customer specific content for technical manuals and documentation, provide revisions for new design iterations.
• Provide detailed responses to customers’ design engineering submittal feedback in accordance with Service Level Agreements.
• Proactively interact with clients, vendors and internal teams (sales, field service, commercial, project managers, internal engineering, etc.) to gather information, and resolve issues.
• Communicate effectively with internal partners and customers, industry contacts (where required), in a timely and professional manner. Ensure all affected departments are well informed and provided with timely updates to open projects/concerns.
• Provide regular progress reports on assignments, identifying areas of improvement and/or successes.
• Other duties as assigned.
• Occasional travel is required.

 Qualifications 

• Bachelor’s degree in electrical engineering.
• 5+ years experience with the application of electrical distribution products and systems.
• Knowledge and experience in evaluating complex single line diagrams (SLDs) and communication network diagrams, including media and protocols.
• Strong technical aptitude and analytical skills, with the ability to interpret technical product specifications and applications.
• Familiarity with ANSI, IEEE, UL, and CSA standards for low-voltage power distribution equipment.
• Proficient in both written and spoken English.
• Excellent communication and employee relations skills.
• Enthusiasm for learning and growth; proactively identifies opportunities and takes initiative to resolve issues.
• A problem-solving mindset and the ability to approach challenges constructively.
• Demonstrated ability to manage multiple concurrent deliverables and perform effectively in a dynamic, fast-paced environment.
• Proficiency with MS Office 365, Adobe/Bluebeam, AutoCAD, business intelligence software (e.g., Tableau, Power BI), and ERP systems (experience with Infor is considered an asset

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day.

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for Inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward.   

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Opportunity to lead key engineering and product decisions
• Actively shipping production code for the Speechify iOS app
• Work within a dedicated product team
• Participate in product discussions to shape the product roadmap
• Maintain and enhance the existing complex app architecture

An Ideal Candidate Should Have

• Experience. You've worked on products that scaled to a large user base
• Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product
• Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience
• Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction
• Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time
• Focus. We’re a high-growth startup with a busy, remote team. You know how and when to engage or be heads down
• Technical skills. Swift, SwiftUI

Technical Requirements:

• Swift Programming Language
• SwiftUI experience
• Experience in Multithreading Programming
• Working with CI/CD infrastructure
• Experience with Fastlane
• SOLID principles, the ability to write every single class according to SOLID
• Experience with Git and understanding of different Git strategies

What We offer:

• A fast-growing environment where you can help shape the company and product
• An entrepreneurial crew that supports risk, intuition, and hustle
• The opportunity to make a big impact in a transformative industry
• A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture
• Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives
• Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world
• Work in one of the fastest growing sectors of tech: Intersection of Artificial Intelligence and Audio 

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace.

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Summary: We are seeking a skilled Network Systems Engineer to assist in the planning, forecasting, and implementation of resource requirements for network systems, including wireless, of moderate complexity. This role involves participating in network planning, architecture design, and engineering, as well as integrating and schematically depicting complete network configurations.

Responsibilities:

• Assist in network planning and architecture design.
• Integrate communication architectures, topologies, hardware, software, transmission, and signaling links into network configurations.
• Evaluate new products and perform network problem resolution.
• Assist in the development and documentation of technical standards and interface applications.
• Monitor protocol compatibility, perform system tuning, and recommend improvements.
• Work on projects/systems/issues of medium to high complexity surrounding network planning, configuration, and optimization.
• Participate as a project team member or occasionally as a project team lead.
• Coach more junior technical staff as necessary.

Required Skills:

• Bachelor’s Degree in Computer Science, Information Systems, or related field, or equivalent work experience.
• Minimum of 3 years of IT work experience in infrastructure/network environments performing network engineering, design, planning, and implementation.
• Experience with network planning, configuration, and optimization for medium to high complexity projects.
• Ability to work effectively as a team member and occasionally lead project teams.

#Ll-Onsite

Who we are

“Welcoming”, “Collaborative” and “Having the opportunity to make an impact” - is how our employees describe working here.  Galileo is a financial-technology company that provides innovative and revolutionary software products and services that power some of the world's largest Fintechs. We are the only payments innovator that applies tech and engineering capabilities to empower Fintechs and financial institutions to unleash their full creativity to achieve their most inspired goals. Galileo leads its industry with superior fraud detection, security, decision-making analytics and regulatory compliance functionality combined with customized, responsive and flexible programs to accelerate the success of all payments companies and solve tomorrow's payments challenges today. We hire energetic and creative employees while providing them the opportunity to excel in their careers and make a difference for our clients. Learn more about us and why we work here at www.galileo-ft.com. 

The role:

You will steward the 'building blocks' of modern fintech. Our APIs empower clients to build unique financial experiences, meaning your team's work directly powers the innovation of some of the world's largest fintechs.

What you’ll do:

• Build the Golden Path: Design and deliver reusable frameworks and shared infrastructure that help product squads ship secure, observable, and compliant services by default.
• Create Platform Abstractions: Identify repeated implementation patterns and turn them into modular platform components that reduce duplication and simplify service development.
• Improve Traceability and Observability: Drive adoption of common telemetry and request-correlation patterns so teams can troubleshoot and operate services more effectively.
• Advance Contract-First Development: Help make technical contracts the source of truth for service development, with tooling that keeps implementation, documentation, and schemas aligned.
• Raise the DX (Developer Experience) Bar: Build platform tools that teams adopt because they are faster, clearer, and easier to use than bespoke alternatives.
• Navigate Trade-offs Well: Make sound technical decisions that balance standardization, delivery speed, and the practical needs of individual teams.
• Partner Across Teams: Work closely with engineers, managers, and adjacent platform teams to align on patterns, priorities, and rollout plans.
• Mentor Through Practice: Coach engineers through design reviews, code review, docs, and shared implementation work; help maintain core platform libraries and support an innersource contribution model.

What you’ll need:

• Bachelor’s degree in Computer Science, a related technical field, or equivalent practical experience.
• Distributed Systems Experience: 8+ years of experience designing and scaling resilient software systems, ideally with strong Python experience.
• Platform Mindset: Experience building shared libraries, services, proxies, or frameworks used by internal engineering teams.
• Modern SDLC Depth: Hands-on experience with CI/CD, automated testing, schema validation, and production delivery pipelines.
• Cross-Team Influence: A track record of driving technical direction and gaining buy-in from peer teams and stakeholders without direct authority.
• Cloud & Kubernetes Experience: Strong experience with AWS and Kubernetes-based environments.
• Pragmatic Engineering Judgment: Ability to identify when a problem should be standardized, abstracted, or left local.

Nice to have:

• Framework Expertise: Familiarity with Python Flask and/or FastAPI frameworks.
• Infrastructure as Code: Experience with Terraform for delivering standardized infrastructure templates.
• API Governance: Familiarity with OpenAPI/Swagger standards and the governance of large-scale API catalogs.
• Observability & Identity Experience: Experience with distributed tracing, metric taxonomies, and service-to-service authentication (S2SA) patterns.
• FinTech Experience: Domain knowledge in payment systems or highly regulated financial technology environments.

The role:

• As a Senior Staff Software Engineer at Galileo, you will lead broad, impactful projects across multiple teams as one of the senior-most technical contributors. Your influence will span across teams, projects and locations, shaping both our technical direction as well as how our teams build and operate software systems.
• You will be hands-on and in the details as an exemplary practitioner for both the software we develop, as well as the tools and techniques we use to test, release and operate it. You will help teams evolve code-bases to ship improvements safely and frequently. As part of this, you will steward a broader engineering community and mentor others.
• You will proactively identify the problems to solve and advocate for the right organization priorities. This role is inherently cross-functional and you will work closely with engineering, product, risk, compliance, data, legal, and executive teams to define and execute on technical strategy. You’ll face and solve a wide range of challenges: technical, product, and operational, shaping your personal growth and career along the way.

What you’ll do:

• Own driving Galileo’s software architecture and systems forward, setting long term direction and executing on it across multiple teams and quarters.
• Build as an exemplary practitioner: you will get to be hands-on developing software, and set a high quality standard for teams to follow.
• Define the right boundaries, APIs, and integrations between our teams and with our clients and partners to set us up for technical and business success.
• Solve complex engineering problems endemic to high-availability, low-latency, scalable distributed systems.
• Execute large-scale projects, leading design, planning, and execution across multiple teams to drive technical directions and product outcomes.
• Proactively identify broader problems and opportunities. Anticipate and design the next generation of our systems and products.
• Raise the quality of our engineering teams: you will identify opportunities and advocate for improvements to the way we write software, our approach testing and quality, and shape the habits and processes of highly effective teams.
• Mentor and coach to individuals and teams across the company. Steward engineering communities, fostering design collaboration and mindshare.
• Articulate how technical architecture and team structure interact, provide input to the right organization structure to deliver on our engineer goals.
• Strategic advisor to leadership, representing technical strategy to business and executive stakeholders, and participating in strategic planning.
• Continuously drives improvement, new practices and operational excellence initiatives across the department (e.g. multiple groups).
• Raises the quality of department and products. Be able to stand up processes, mechanisms, or tools to improve engineering excellence, operations, and quality of our technology.
• Through a combination of working through others and their contribution, improves the department's systems by championing improvements in code, design, and operational reviews. Leads initiatives that improve department software quality and operations. Be a stakeholder in engineering norms and standards for code quality, software quality, and operational excellence for your department.

What you’ll need:

• 10+ years programming experience, mastery of software development independent of language (Ideally in Python)
• Advanced expertise in designing, building, and operating large-scale fault-tolerant distributed systems, applications, databases, and workflows.
• Demonstrated experience with continuous delivery principles and techniques: you’ve built systems with layered test automation that is always safe for automated releases to production, enabling a great, low-cycle time developer experience.
• A high standard for what “great” looks like, and experience continuously improving legacy systems to reach it.
• Strong judgment, experience recognizing and driving out critical decisions in a balanced and pragmatic way.
• Experience building systems with public cloud infrastructure, preferably AWS.
• Excellent verbal and written communication skills.
• Ability to lead and influence technical direction across multiple teams.
  
  

We are seeking a Civil Engineer EIT to join our growing team 

You will play a key role in supporting project teams by leading design aspects and addressing engineering issues across various projects. You will have the opportunity to develop and showcase your proficiency in civil engineering principles while collaborating closely with project managers, team members, and clients.

Responsibilities:

• Partner with project teams and clients to prepare project documents and proposals.
• Draft, review, and finalize project deliverables including:
  • Site plans
  • Engineering reports
  • Cost estimates
  • Project schedules
  • Permit applications
  • Due diligence reports
• Make edits and modifications to plans based on client and agency feedback.
• Research local/state zoning requirements for properties and projects.
• Conduct site visits and field assignments.
• Analyze site survey data and consider development factors.
• Utilize AutoCAD Civil 3D and related software to complete assignments efficiently and according to quality standards.
• Communicate effectively with clients, municipalities, and agencies under the direction of the Project Manager.
• Update Project Manager and Team Leader on workload status.
• Apply fundamental engineering concepts to practical situations.

Qualifications:

• Bachelor's degree in Civil Engineering.
• Two to four (2-4) years of experience in civil engineering, with experience leading design aspects of development projects preferred.
• Proficiency in AutoCAD Civil 3D, Grading Design, Technical Writing, 3-D Modeling, MS Office, and Plan Interpretation.
• Strong written and verbal communication skills.
• Excellent workload management skills.

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-EB1

Job Description

ChenMoore is seeking a Senior Engineer, Distribution to support the design and delivery of power distribution infrastructure projects across Florida and surrounding states.  This role will focus on utility distribution systems, including overhead and underground design, system upgrades, and grid resiliency initiatives.

The ideal candidate brings experience in electric utility distribution design, strong engineering fundamentals, and the ability to support projects from field data collection through final design and construction packages.

Responsibilities

• Support the design and engineering of electric utility distribution systems (overhead and underground).
• Perform engineering calculations and design for:
• Conductor sizing and reconductoring
• Pole loading and structural analysis
• Transformer and equipment placement
• Conduct field visits and site assessments, including data collection, measurements, and existing condition evaluations.
• Develop construction-ready design packages, including plans, specifications, and material estimates.
• Apply utility standards and client specifications.
• Evaluate system performance and develop solutions for:
• Capacity upgrades
• Clearance violations
• Aging infrastructure replacement
• Support storm hardening and grid resiliency projects.
• Coordinate with internal engineering teams, clients, and external stakeholders.
• Assist with project scheduling, budgeting, and deliverable tracking.
• Mentor junior engineers and support technical development of the team.

Minimum Qualifications

• Bachelor’s degree in electrical engineering or closely related field.
• 10+ years of experience in power delivery or electric utility distribution design.
• Professional Engineer (PE) license in the State of Florida (or ability to obtain within 6–12 months).
• Experience with overhead and/or underground distribution systems.
• Knowledge of utility standards and design practices.
• Strong understanding of NEC, NESC, and applicable industry standards.
• Experience with engineering/design tools such as:
• AutoCAD, MicroStation, or similar
• Distribution design platforms (preferred)
• Strong communication and organizational skills with the ability to manage multiple assignments.

Preferred Qualifications

• Experience supporting projects in the 4kV – 35kV distribution range.
• Familiarity with utility clients in Florida (FPL, Duke Energy, cooperatives, municipalities).
• Experience with pole loading analysis tools and distribution modeling software.
• Experience with storm hardening or infrastructure resilience programs.

Job Description

ChenMoore is seeking a Senior Engineer, Distribution to support the design and delivery of power distribution infrastructure projects across Florida and surrounding states.  This role will focus on utility distribution systems, including overhead and underground design, system upgrades, and grid resiliency initiatives.

The ideal candidate brings experience in electric utility distribution design, strong engineering fundamentals, and the ability to support projects from field data collection through final design and construction packages.

Responsibilities

• Support the design and engineering of electric utility distribution systems (overhead and underground).
• Perform engineering calculations and design for:
• Conductor sizing and reconductoring
• Pole loading and structural analysis
• Transformer and equipment placement
• Conduct field visits and site assessments, including data collection, measurements, and existing condition evaluations.
• Develop construction-ready design packages, including plans, specifications, and material estimates.
• Apply utility standards and client specifications.
• Evaluate system performance and develop solutions for:
• Capacity upgrades
• Clearance violations
• Aging infrastructure replacement
• Support storm hardening and grid resiliency projects.
• Coordinate with internal engineering teams, clients, and external stakeholders.
• Assist with project scheduling, budgeting, and deliverable tracking.
• Mentor junior engineers and support technical development of the team.

Minimum Qualifications

• Bachelor’s degree in electrical engineering or closely related field.
• 10+ years of experience in power delivery or electric utility distribution design.
• Professional Engineer (PE) license in the State of Florida (or ability to obtain within 6–12 months).
• Experience with overhead and/or underground distribution systems.
• Knowledge of utility standards and design practices.
• Strong understanding of NEC, NESC, and applicable industry standards.
• Experience with engineering/design tools such as:
• AutoCAD, MicroStation, or similar
• Distribution design platforms (preferred)
• Strong communication and organizational skills with the ability to manage multiple assignments.

Preferred Qualifications

• Experience supporting projects in the 4kV – 35kV distribution range.
• Familiarity with utility clients in Florida (FPL, Duke Energy, cooperatives, municipalities).
• Experience with pole loading analysis tools and distribution modeling software.
• Experience with storm hardening or infrastructure resilience programs.

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity.  

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

The responsibilities of our Platform team include building and maintaining all backend services, including, but not limited to, payments, analytics, subscriptions, new products, text to speech, and external APIs.

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, is passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Design, develop, and maintain robust APIs including public TTS API, internal APIs like Payment, Subscription, Auth and Consumption Tracking, ensuring they meet business and scalability requirements
• Oversee the full backend API landscape, enhancing and optimizing for performance and maintainability
• Collaborate on B2B solutions, focusing on customization and integration needs for enterprise clients
• Work closely with cross-functional teams to align backend architecture with overall product strategy and user experience

An Ideal Candidate Should Have

• Proven experience in backend development: TS/Node (required)
• Direct experience with GCP and knowledge of AWS, Azure, or other cloud providers
• Efficiency in ideation and implementation, prioritizing tasks based on urgency and impact
• Preferred: Experience with Docker and containerized deployments
• Preferred: Proficiency in deploying high availability applications on Kubernetes

What We Offer

• A dynamic environment where your contributions shape the company and its products
• A team that values innovation, intuition, and drive
• Autonomy, fostering focus and creativity
• The opportunity to have a significant impact in a revolutionary industry
• Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture
• The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more
• An active role at the intersection of artificial intelligence and audio – a rapidly evolving tech domain

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace. 

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction.

This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you.

Responsibilities:

Customer Integration:

• Become a trusted advisor and technical expert for assigned enterprise accounts
• Weekly onsite visits at customer and partner locations, building relationships and understanding their needs
• Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform
• Proactively identify and address potential manufacturing challenges
• Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities

Order Fulfillment and Quality:

• As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network
• Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications
• Manage projects to successful completion, overseeing production, and ensuring on-time delivery
• Handle critical communications, order changes, and escalations related to customer orders
• Monitor customer-specific dashboards to track order progress, delivery metrics, and quality performance

Sales and Account Growth:

• Partner with Enterprise Sales Executives to drive account growth and retention
• Identify opportunities for expanding Xometry's services within existing accounts
• Provide technical expertise and support during the sales process
• Gather customer insights and feedback to inform sales strategies

Qualifications:

• Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required
• 7+ years of experience in manufacturing, product development, and project management
• Experience in the aerospace industry is highly preferred
• Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications
• Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred
• Proficiency in modelling and drafting software such as Solidworks
• Excellent communication, interpersonal, and problem-solving skills
• Experience with CRM systems such as Salesforce
• Proficiency in Google Suite and Microsoft Office Suite
• Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day trips

#LI-Remote

Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking an experienced Electrical Engineer to join our growing design team in our Jacksonville, FL office. In this design role, you will represent Syska Hennessy Group and work in close contact and effectively interact with the Internal Design team as well as external clients and consultants. Individuals in this position must demonstrate the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team.

Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career.

Job Responsibilities

As an Electrical Engineer, you will be responsible for creating basic designs under the direction of the Senior Engineer and/or Senior Designer. You will also develop specifications, system narratives, and system layouts for a variety of projects of different sizes.

Additional responsibilities include:

• Beginning to establish system application, design, and operational parameters / sequences under the direction of the Senior on the project
• Participating in ensuring / Oversee QA/QC process for your work and the work of others
• Assisting in the ongoing determination of project scheduling requirements, manpower requirements, and project budgets
• Performing construction administration and field investigation tasks for assigned projects, including conducting field inspections and subsequent detailed inspection reports
• Assisting in processing RFI’s, Change Orders, Bulletins, and Addenda

Job Requirements

Successful candidates for the Electrical Engineer role should have the ability to use REVIT for system layout and spatial coordination of the production of detailed drawings. Someone who exhibits a basic understanding of the practical application of LEED principles to our building designs would be a good fit for this dynamic role.

Additional requirements include:

• Bachelor’s degree in Electrical Engineering from an Accredited Institution
• 7+ years of experience working in a consulting firm
• Current PE registration, preferred; E.I.T./FE required.
• LEED AP, highly preferred
• History of working with projects such as Federal, Healthcare, Commercial, and Mission Critical
• REVIT and the latest version of AutoCAD MEP experience
• Proficient in design and calculation software

Benefits

As an employee of Syska Hennessy, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here.

As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy includes:

• Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans
• 401(k) plan with a generous employer matching program
• Training and professional development courses
• Professional development incentive bonuses
• Dynamic Employee Resource Groups
• Competitive Paid Time Off (PTO) policy
• Transit/parking employer stipend
• ½ day work from home Fridays all year long

Syska Hennessy Group - Creating Exceptional Environments

Let’s Work Together!

(SME) Subject Matter Expert - Mechanical – Part-time

Do you have 20+ years of experience in the MEP Engineering business as a mechanical engineer and are looking for a part time position to pass your knowledge down to future generations.  We have the perfect opportunity for you.  This position is very flexible with schedule and working arrangements.  

As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. 

We are seeking a Technical Manager-I to join our team in any of our US. Office locations or remote.  As a Technical Manager – Mechanical, you will be responsible for updating mechanical content for our Knowledge Den and Syska’s technical standards and specifications.

Our dynamic work environment provides the optimal setting to take your career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedules and fun social events, it is everything you will need for an exciting, challenging, and rewarding career.

Job Responsibilities

As a Mechanical Technical Manager, you will provide your technical knowledge and produce mechanical standards as part of Syska Expert Teams and Knowledge Den.

Additional responsibilities include:

• Creating Technical Content for our Knowledge Management Database called the Knowledge Den
• Creating/Updating the Company’s Specifications
• Creating/Updating the Company’s Standard Details
• Creating/Updating firmwide Calculation Spreadsheets
• Training / Mentoring Junior Engineers
• Helping our software engineers develop Copilot for Knowledge Den

Job Requirements

• Bachelor’s degree in Mechanical engineering from an Accredited Institution
• 15+ years’ experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry
• Part-time position – Less than 20 hours a week.

Benefits

As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here.

As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities.