Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Maternal Leave
• Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Demonstrate proficiency in Building Automation Systems (BAS), Entrata and CMMS systems for timely logging of service requests and completed work.
• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s standards.
• Perform physically demanding work to maintain the asset, and other property features to minimize liability concerns.
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems such as: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot- & cold-water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted power supply (UPS), elevators and lifts, parking structures (ventilation/drainage systems, T-Joints), entrance & exit gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, and insulated glass units (IGUs).
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire dampers.
• Assist in creating emergency and disaster preparedness plans and protocols.
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as needed.
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Supervisor.
• Coordinate maintenance objectives and daily assignments with the Supervisor.
• Diagnose and perform routine maintenance/repair in a timely and professional manner.
• Assure all service requests are completed daily.
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of completion.
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident trust.
• Inspect vacated apartments and record necessary repairs and maintenance, informing the Facilities Supervisor of needed services and repairs.
• Routinely perform duties including basic appliance repair, general carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the General Manager/Property Manager.
• Routinely inspect interior common areas and the exterior of the property, ensuring daily upkeep of all common areas with company standards, and all the light fixtures are in working order.
• Complete preventive maintenance tasks on all equipment and operating systems to ensure warranty compliance and extended useful life.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as assigned.
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and safe. 
• Maintain parts and supply inventory, as authorized.
• Clean and organize the workshops, storerooms, boiler rooms, and utility rooms.
• Clean pools; adjust and maintain chemicals to proper levels, if needed.
• Pressure-wash sidewalks, buildings, pool decks, etc.
• Assist in snow removal at property, as required.
• Assume responsibility for after-hours emergencies at the direction of the company supervisor/manager.
• Undertake training related to job duties as deemed necessary.

The responsibilities listed above may not be all-inclusive. 

What we Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND4 #wearehiring #werehiring 

Principal Duties/Responsibilities:

· Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary.

· Independently performs maintenance as per industry standards.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Complies with 5S and housekeeping standards.

· Drives and participates in CI activities - processes, results and cost savings.

· Updates records and reviews CMMS history.

· Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems.

· Utilizes predictive maintenance technologies to collect equipment performance data.

· Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development.

· Completes on-the-job and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program.

· Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate

· May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

Principal Duties/Responsibilities:

· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

· Independently performs maintenance as per industry standards.

· Works with Planner Scheduler to optimize preventative maintenance procedures.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Complies with 5S and housekeeping standards.

· Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.

· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

· Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

· Updates records and reviews CMMS history and analyzes data.

· Completes and conducts on-the-job training and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry.

· Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

· Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate.

· Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.

· May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.