Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Staff Engineer, Process to join our team for our Plaquemines Parish Facility.

This role reports to the Manager, Process Engineering, and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

Responsibilities:

• Support the development and progression of the Ready For Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Serve as the project focal points for all areas of process engineering to ensure that the project is executed according to agreed budgets, schedules and design requirements.
• Responsible for process engineering deliverables to ensure they comply with the project design and operation philosophies.
• Prepare heat and material balance, process flow diagrams, piping and instrumentation diagrams.
• Responsible for system design parameters, and design or rating of equipment such as heat exchangers, vessels, towers, etc. and provide technical guidance on complex design issues.
• Review and coordinate with licensors, vendors, and subcontractors to ensure proper and complete integration within the project plan.
• Support the development of process simulations for complex units, updates and modifies process simulation models.
• Support process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits and safety studies.
• Support during construction to ensure site technical queries, non-conformances, concession requests are properly resolved.
• Perform economic evaluations of equipment alternatives with emphasis on availability and reliability projections and life cycle costs.

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor's degree in Chemical Engineering
  • Professional Engineer's (PE) License or equivalent CEng license is a plus

• Experience: 
  • A minimum of ten (10) years’ experience working in a senior engineering capacity in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience will be considered.
  • Working knowledge of key equipment involved in LNG liquefaction facilities.
  • Experience in all aspects of process engineering from conceptual design, economics, detailed engineering, and plant startup and troubleshooting.
  • Commissioning, start-up and performance testing at project sites is a plus.

• Additional Skills:
  • Excellent written and oral communication skills.
  • Effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
  • Knowledge & application of relevant major design codes and standards.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Planner. The Planner reports to our Operations team and is responsible for developing, maintaining and communicating projects schedules. The position can be assigned to one or multiple facilities as well as specific initiatives for business studies or process development responsibilities. This position is located in Pointe Celeste, LA.

 Responsibilities:

• Lead planning exercises, prepare, and maintain project schedules for Operations
• Ensure the appropriate level of planning and scheduling functionality is applied to support project controls activities
• Assists operations team in resolution of issues involving cost, schedule, and changes
• Establishes and maintains a standard reporting format for management reports
• Review schedules to ensure that the appropriate level of details and structure are applied and effective progress monitoring
• Ensure schedules generated for a project are fully integrated and resource-loaded in order to ensure accuracy
• Ensure compliance of industry procedures and practices
• Set up, implement, and maintain schedule related key performance indicators (KPIs)
• Obtains data on progress, logic, and manpower from operations/plant personnel
• Conduct schedule review meetings and assist in developing alternatives to accommodate changes to operational plans and communicate any deviations of current plan

Qualifications:

• Education and Certifications: Bachelor's Degree (Engineering discipline preferred) or equivalent experience in LNG project engineering and/or construction industry
• Experience: 3+ years of experience 
• Demonstrated success in proactively improving processes and systems
• Exceptional written, verbal and interpersonal communication skills
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies.
• Organized, planning skills, able to manage multiple activities and programs in timely fashion and with a high degree of accuracy, able to meet work deadlines
• Exceptional problem solving and analytical skills 
• Computer knowledge including Microsoft Office Suite including Word, Excel, Access, Project and PowerPoint
• Specific expertise with Microsoft Project

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Analyzer Technician.

Location: Plaquemines Parish/Belle Chasse - Point of Reference: 19000 LA-23, Point Celeste, 70083

General Description:

The Maintenance Analyzer Technician reports to the Maintenance Controls Supervisor and performs the safe, efficient and effective execution of all Analyzer  maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Analyzer Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments.

Responsibilities:

1. Executes preventive and corrective maintenance work in a wide variety of Analyzers according to PLNG HSSE process, procedures, standards and regulations.
2. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
3. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
4. Performs problem solving activities in order to ensure maintenance and reliability corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Analyzer
5. Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
6. Works along with Operations, Maintenance and Engineering counterparts to ensure the safe completion of maintenance work.
7. Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures.
8. Manage personal time card according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
9. Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
10. Monitors standards and carrier bottles availability. Work with Planning team members to ensure replacement standards are ordered and on site before the expiration date, as required.
11. Support analyzer regulatory and fiscal testing procedures such as audits on CEMS.
12. Maintain records of all maintenance actions taken (Preventive Maintenance, non-routine maintenance and repair activities on all critical Analyzers). This includes; CEMS Data Base, Non CEMS Data Base, LEL/Gas Detector Data Base, SQC Data Base, and ISO records.
13. Work with Controls team to maintain and troubleshoot GC Analyzer Systems (such as AMADAS) communication network.
14. Provide mentoring and coaching to others and holds personal accountability for performance and behavior.
15. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility.
16. Participate in PLNG Ready for Operations (RFO) maintenance projects in order to develop required maintenance systems, process and procedures before commercial operations.
17. Supports Analyzer equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required.
18. Supports Instrumentation and Controls team members as required.
19. Participate in pre-commissioning, commissioning, startup and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor.
20. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D model and P&ID reviews
21. Assist with training and mentoring coworkers. Sharing our knowledge and experience not only strengthens our team but also promotes a collaborative work environment.
22. Contribute to the plant's housekeeping duties. Maintaining a clean and organized workplace is vital for our safety and efficiency. These tasks are expected, essential, and mandatory for all employees. 

Qualifications:

1. Education and Certifications
   • Minimum of a high school diploma or GED; Technical degree in Instrumentation, or applicable nationally recognized standard Certification. (i.e. NCCER / NICET)
2. Experience:
   • Minimum 3-5 years of maintenance Analyzer work experience in Oil & Gas, LNG or petrochemical facilities.
   • Strong knowledge of electrical industrial standards and regulations (i.e. ISA, NFPA 70E, FERC, GPA 2177, 2198, 2261-13,14,19)
   • Strong knowledge of preventive and corrective maintenance of Analyzers Instrumented equipment.
   • Strong applied knowledge of maintenance and inspection of critical analyzers, such as, but not limited to: ph meters, O2 meters, gas chromatography, infrared and ultraviolet detection technology, conductivity analyzers, online spectrometers, emissions monitoring, oxygen measurement, and regulatory, fiscal, environmentally required analyzers.
   • Experience/Knowledge GC Analyzers (i.e. AMADAS) systems.
   • Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
   • Work experience in small/medium scale Analyzer instrumented projects.

Skills:

1. Strong leadership and organizational skills are required.
2. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies
3. Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
4. Credibility to set high standards and promote continuous improvements initiatives.
5. Able to work with a culturally diverse group of technical individuals.
6. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations.
7. Exceptional problem solving and analytical skills.
8. Able to operate Industrial Mobile Equipment (i.e. Forklift truck, Aerial Lift, ect...)
9. Able to work at elevated height(s) over.
10. Able to work over water and operate watercraft.
11. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
12. Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Turnaround Coordinator (Mechanical)

Location: Venture Global Plaquemines Parish Liquefied Natural Gas (PLNG) facility in Point Celeste, Louisiana

General Description: 

The Operations Projects Coordinator, Mechanical reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO Mechanical work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Projects Coordinator, Mechanical position primarily coordinates and directs the safe execution of the Turnaround Mechanical works and will be required to interface and work in collaboration with Turnaround Contractors, Operations, Maintenance (Planning and Execution), Engineering, Procurement, Warranty, Project Departments among others. 

Responsibilities: 

• Manages and Coordinates Mechanical Turnaround work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages and Coordinates Mechanical Turnaround work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures compliance with and communication of all conditions inherent to Management of Change within the operating facility.
• Assists with coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Facilitates the Turnaround scope of work workshops under his area of responsibility, ensures works are captured in SAP, STO Revisions and STO IDs.
• Serves as SME and supports Turnaround Planners for the development of execution work packs under his area of responsibility. Support the identification of risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Work with Turnaround Scheduler for the development of schedules under his area of responsibility and supports Critical Path Method (CPM)
• Works with Turnaround Logistic Coordinator for logistics, tools, equipment certifications/mobilization as required. 
• Strict adherence to VGLNG Business controls, approved contracts/suppliers.
• Participates in Turnaround contractor selection process, once the Contractor is onboard facilitated contractor’s work scope reviews and schedules and once in Execution controls Contractor timesheets.
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Monitors Pre-Execution and Post turnaround work progress against established schedule baselines. Updates, coordinates and communicate progress and schedule risk changes to all active parties and including third party contractors or vendors as required.
• Act as SME for continuous improvement/Lesson learned.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years’ work experience as Mechanical routine maintenance Execution Lead or Supervisor and three (3+) years as Mechanical Turnaround Coordinator in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects,Lead

Location: Venture Global Plaquemines Parish Liquefied Natural Gas (PLNG) facility in Point Celeste, Louisiana

General Description: 

The Operations Projects, Projects Lead reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the Execution Resources required to complete Operations Project work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Projects, Lead is responsible for the oversight of all traditional Owner-side Construction Management functions; Directing all Brown-field contracts executed under a self-directed model (Scaffold, Insulation, heavy lift, single discipline Specialty Works, Vendor site support), and providing Owner field administration for all General Contracts. Focal points for the position will be:

• An incident free environment, wherever Project works are carried out
• An open and supportive culture in the field, encouraging input, collaboration, and intervention.
•  Contractor compliance with all Facility, Design, and Regulatory Specifications and Standards 
• Efficient Contractor performance relative to cost and schedule
• Establishment and ownership of field communication workflows such as RFI, FWI, NCR, FCN, etc. which predominantly involve Contractors
• Ownership of effectiveness of field communication workflows involving Facility Operations such as MOC, Permit Processes, PSSRs etc.
• Clarity of technical communications to and from field contractors

Responsibilities: 

• Manages Operations Project work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages Operations Project work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures field communication of all conditions inherent to Management of Change within the operating facility.
• Oversees contractor participation in the evolution of all execution schedules
• Provides Subject Matter Expertise in the evolution of Construction schedule Logic, Test Plans and Site Safety Programs
• Provides expert level contractor support for all special permit requirements (such as Line Breaks, Ground Breaks, Confined Space Entries, Critical Lifts, Critical System Defeats, Leading Edge/Work at Heights, and Positive entry control, etc.) which are very common in Turnarounds
• Assures communication of all contactor ITPs, test notifications, and dossiers
• Supervises coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Expedites the close out of field RFI and NCR
• Expedites Contractor inputs to budget impacts caused by field change
• Oversees Operations Project scope of work workshops under his area of responsibility.
• Strictly adherence to VGLNG Business controls, assuring approved contracts/suppliers execute the field work represented in their contract.
• Participates in contractor selection process
• Participates in Contractor scope and schedule reviews
• Endorses Contractor Timesheets
• Continually audits Contractor field progress
• Maintain a continuous awareness of ongoing contractor activities on all project work fronts.
• Conducts multiple daily field surveys at all active work fronts
• Regularly attends ‘Toolbox Talks’, offering expert input
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Communicates all field generated risk to Safety, Quality, Schedule and Cost
• Act as SME for continuous improvement/Lesson learned regarding field performance.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum 10 (10+) years’ work experience in Construction Management (as Superintendent, Manager or Lead) in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different aspects of Greenfield Safety, Scheduling and communications. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• The ability to constantly provide solutions based on logic backed by extensive personal and technical experience
• Must be an extremely effective communicator
• Must relate to people and present multiple effective motivational options
• Strong safety, schedule and quality awareness
• Able to manage multiple activities with a high degree of efficiency and accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for the performance and behavior of the field team.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

Location: Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility in Point Celeste, Louisiana.

General Description: 

The Operations Project, Scheduler reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO scheduling processes of work at Venture Global Calcasieu Pass Liquefied Natural Gas (CPLNG) facility. The scheduler position will require interface and work in collaboration, but not limited to, Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments. 

Responsibilities: 

• Strict adherence to VGLNG business controls, approved contracts/suppliers.
• Schedule STO work according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe STO work conditions or SIMOPS.
• Schedule STO work according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Develop and maintain short, medium and long term STO schedules and act as a VGLNG STO gate.
• Develop resource loaded schedules to a safe, efficient and effective capacity.
• Work with STO Planners for the development of ROM cost estimates, following AACE 18R-97 Cost estimate classification system.
• Analyze Critical Path Method (CPM) and Earned Value functionality. Produces analytical reports such as Resources Histograms, S-Curves. including analysis of deviations, variations and trends.
• Identifies STO schedule risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Monitor progress against and establish STO schedule baselines. Updates, coordinates and communicate schedule risk, changes to all active parties and including third party contractors or vendors as required.
• Development, implementation and utilization of STO Planning & Scheduling best practices. Act as SME for continuous improvement.

 Qualifications 

• Minimum a high school diploma or GED. Technical degree, PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years' work experience as routine maintenance scheduler and three (3+) years as Turnaround Scheduler, in Oil and Gas, LNG or petrochemical facilities.  
• In-depth Primavera Project Management P6 (3+) years' experience required) is a must.
• Proficient at SAP Plant Maintenance and Prometheus as “End User” level.
• Familiar with AACE 18R-97 Cost estimate classification system.
• Strong experience level using Microsoft Office Suite.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Project Management PMP training or certification is a plus.
• MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Skills 

• Strong leadership and organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality and ethical behavior.
• Capable of setting high standards and promoting continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design delivers operational reliability at significantly lower capital cost.

Position Summary

Venture Global is seeking a senior leader to own the planning, execution, and handover of brownfield capital projects and complex integrated turnaround outages across operating LNG facilities.

This role is responsible for coordinating front-end engineering through execution and operational handover, applying Venture Global’s Brownfield Stage Gate and Outage Management processes, and ensuring safe, predictable delivery aligned with operational reliability, cost, and schedule objectives. The position requires deep experience in LNG brownfield project execution, plant operations, turnarounds, and with the ability to lead matrixed internal and external teams across engineering, operations, maintenance, construction, and contractors. This position will be based in Louisiana, with regular travel to operating facilities and contractor locations.

Position Responsibilities

Capital Projects & Brownfield Execution

• Lead and coordinate front-end engineering, feasibility, define, execute, and handover phases for brownfield capital projects through Venture Global’s Stage Gate Process.
• Ensure projects deliver optimal schedule, cost, operability, and technical integrity outcomes.
• Develop and optimize brownfield execution strategies for operating LNG facilities, including CP, CP2, and Plaquemines.
• Ensure alignment between project scopes, outage windows, operational priorities, and long-term asset reliability.
• Monitor contractor and service provider performance to ensure technical, commercial, and HSSE compliance.
• Assist with preparation and review of key approvals including:
• Scopes of work
• Feasibility studies
• Contracting and execution strategies
• MOC documentation
• Awards, variations, and project change requests
• Ensure appropriate quality assurance and technical assurance across engineering and execution deliverables.

Turnarounds & Outage Leadership

• Plan, lead, and execute complex, integrated LNG turnarounds and outages, including gas turbines, pretreatment units, liquefaction units, instrumentation and controls upgrades, and balance-of-plant scopes.
• Lead the development of logically integrated outage schedules, coordinating multiple work fronts and execution interfaces.
• Track and manage scope growth, risk, schedule deviation, and cost impacts throughout outage execution.
• Apply Venture Global’s Outage Management Procedure to ensure consistent planning, execution, and closure.
• Serve as outage/project lead for medium to large outage scopes, coordinating multi-discipline teams and external contractors.
• Communicate outage status, risks, and exceptions clearly to senior leadership.

Stakeholder & Leadership Responsibilities

• Act as a key interface between Operations, Engineering, Projects, Maintenance, HSSE, and external contractors.
• Ensure senior management is fully informed of key risks, issues, and mitigation strategies.
• Lead and influence matrix organizations to drive integrated execution outcomes.
• Train, mentor, and develop project and outage personnel, fostering strong technical capability and leadership depth.
• Contribute to continuous improvement of brownfield and outage execution processes, tools, and standards.

Health, Safety, Security & Environment (HSSE)

• Responsible for ensuring HSSE policies and regulatory requirements are applied across all project and outage activities.
• Drive a strong safety culture, environmental stewardship, and operational excellence mindset.
• Reinforce Venture Global’s Stop Work Authority — ensuring all personnel understand their obligation and authority to stop unsafe work without fear of reprisal.

Qualifications & Experience

• Bachelor’s Degree in Engineering or equivalent technical discipline (required).
• 10+ years’ experience in LNG operations, brownfield capital projects, and turnaround/outage execution.
• Proven experience leading complex, integrated outages in operating LNG or similar process facilities.
• Strong working knowledge of project controls, scheduling, risk management, and cost management systems.
• Demonstrated ability to manage EPC / EPCM contractors and service providers.
• Strong understanding of discipline interfaces and project execution workflows.
• Client-side experience strongly preferred.
• Professional Engineer (PE) license preferred.
• Willingness to travel up to 65%.

Competencies

• Strong operational mindset with the ability to balance production, safety, cost, and schedule.
• Highly effective communicator able to challenge constructively and negotiate outcomes.
• Decisive leader capable of exercising independent judgment on complex issues.
• Proactive, flexible, and resilient in fast-paced operational environments.
• Strong team player with the ability to lead matrix organizations.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Instrument and Controls Engineer for our Plaquemines Parish Facility.

General Description:

• Take responsibility for the Instrumentation & Control engineering and design team assigned to, and their design output to quality, cost and schedule requirements for specific projects.
• Support the Technical Integrity role for the Instrument & Control (I&C) discipline.
• Ensure all engineering and design work performed adjusts to quality, cost, and schedule requirements.
• Ensure all design work is safe and carried out in a safe manner.
• Ensure all design work conforms to the codes and standards used by the project, or to agreed industry standards.
• Self-motivated individuals with a desire to solve complex engineering problems, show effective team leadership and communication skills will be ideally suitable for this role.

Responsibilities:

• Lead a discipline project team of Designers/Engineers as part of the Instrumentation team.
• Serve as project lead designer/engineer and supervises the work of other engineers, designers or drafting.
• Perform designing/engineering work/deliverables as part of the Instrumentation & Control team.
• Ability to interpret project specifications.
• Coordinate/Communicate with other disciplines and the project.
• Support Scope definition, estimation, and progress control of Instrumentation & Control engineering activities.
• Support Resource allocation based on project schedule requirements
• Lead RFP, Estimations, Detailed Engineering, and field support project activities
• Familiarity of applicable codes and LNG standards to support engineering deliverables
• Support quality assurance and verification role on engineering deliverables
• Quality Assurance – Responsible for working, and getting team members working with you, within the provisions and guidelines of the Company Quality Assurance system
• Identify issues and problems, develop appropriate solutions.
• Assist and support junior/intermediate/senior personnel within the Instrumentation & Controls engineering team.
• Keep up to date with the latest developments and technical innovations in Instrumentation & Controls engineering.
• Resolve discrepancies between Contractor and Company requirements.
• Ensure the project scope is clear and that changes comply with project change management processes.
• Participate in relevant meetings, prepare progress reports and follow required checking procedures.
• Will be required to provide assistance and advice during procurement, construction and commissioning activities.
• Provide construction management support as required.
• Liaise with Contractors, vendors, engineers, and other disciplines.
• Participate in the professional development of less experienced members of the department/team.

Qualifications

Education and Certification Experience: 

• Post-Secondary Education in a field related to Instrumentation & Control.
• Minimum Fifteen (15) years of direct Instrumentation & Control design and engineering experience.
• PE registered in the State of Texas and/or Louisiana

Technical and Industry Experience:

• 15 - 25 years of engineering experience in I&C engineering
• Leadership role supporting multiple small to mid-sized projects
• Knowledge of Electrical would be an asset/preferable.
• Previous site experience will be an asset.
• Experience in Oil & Gas industry necessary
• Experience in LNG production preferred
• Familiar with digital tools, digitization and data acquisition experience are an asset
• Extensive working knowledge of Instrumentation & Control deliverables such as:
  • Panel (JB and Marshalling) Design
  • P&ID's
  • Loop Drawings
  • Wiring Drawings
  • Motor Control Schematics
  • Instrument Location Drawings
  • Instrument Installation Details
  • Instrument Specifications (Datasheets)
  • I/O Lists
  • Bill of Materials
  • Conduit/Tray/Cable Schedules
  • Control Narratives
  • Cause and Effect Diagrams
  • Functional Safety Requirements
  • Material Requisitions
  • Construction or Engineering Work Packages.
• Extensive working knowledge of Instrumentation Calculation/Selection, such as:
  • Flow (Orifice Plates, Vortex, Venturi, Magnetic, Ultrasonic meters)
  • Level Measurement (Radar, Displacers, Gauges)
  • Temperature (including Thermowells Freq. wake calculation)
  • Pressure
  • Process Analyzers and sampling systems would be a plus
• Competent use of instrument calculation/selection specific software.
• Working knowledge (design/configuration/implementation) of any of the following systems:
  • PLCs, preferable Rockwell.
  • SISs, preferable Yokogawa, Honeywell.
  • DCS, preferable Honeywell Experion, Yokogawa
• Extensive knowledge of industry standards and codes related to Instrumentation & Control system deliverables.
• Demonstrated experience with Instrumentation & Control technologiesin LNG or Oil &Gas industry.
• Demonstrated capabilities in leading the Instrumentation & Control design and engineering work in multiple and concurrently small and medium projects.
• Basic knowledge of Computer Aided Design software.
• Basic knowledge of SmartPlant Instrumentation software.
• Basic knowledge of Communications Networks
• Competent use of relevant software such as MS Office Suite.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Principal Engineer, Rotating Equipment to join our team.

Location: Plaquemines Parish

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall possess in-depth understanding on drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.

Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

The incumbent is also expected to provide guidance and mentorship to less experienced staff associated with maintaining and operating plant equipment, to ensure the highest level of asset availability.

Responsibilities:

• Will provide advice and guidance on Rotating Equipment system engineering issues.
• Provide daily-to-day Rotating Equipment and Mechanical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
  • Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage.
  • Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
    • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
  • Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
  • Provide support to the Maintenance team for Turnaround planning and execution.
  • Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Rotating Equipment systems throughout the plant.
  • Reliability Centered Maintenance (RCM): Lead initiatives to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective. 

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required
  • Mechanical Engineering focus is preferred. 
  • A Professional Engineering License is preferred.

• Experience: 
  • 20 - 25 years’ experience working in an engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
    • Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required 

• Additional Skills:
  • Knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Permit to Work Coordinator.

Location: Plaquemines Parish/Belle Chasse Area - Point of Reference: 19000 LA-23, Pointe Celeste 70083

General Description:

The Permit to Work Coordinator reports to the Operations Superintendent & Shift Supervisors of Process & Power Island and is a focal point for all work activities involving permit coordination of the Venture Global Plaquemines liquefied natural gas facility. This is a safety sensitive position intended to provide employees a career path in developing a higher level of experience with internal company safety procedures and controls. This vital role is responsible for implementing the Permit to Work system to support operational safety and compliance policies, procedures, and forms. PTW Coordinator will provide guidance to operations, maintenance & contractor personnel on completion of appropriate permits to perform work. The incumbent will possess skills in completing Job Hazard Analysis, understand HAZOP’s, Lock-Out-Tag-Out and all safety related policies and procedures.

 Responsibilities:

1. Must be familiar with all applicable policies and procedures associated with performing any work (crane lifting/rigging, mechanical isolation, inhibited isolations, JHA’s i.e.).
2. Is responsible to verify certification of employees operating equipment and machinery. Performs onsite audits of work taking place to ensure compliance with PTW and all applicable policies, procedures, and regulations. Closes out permits and ensures appropriate document filing and retention controls are followed. Keeps all supervision advised of any safety, environmental, or other compliance issues.
3. Assist operations, maintenance & contractor personnel in identifying appropriate permits for their daily work. Must have a good understanding of P&ID’s, PFDs, and plant operations to assist in identifying permits required. Ensure that the person in direct charge of a unit, plant or Installation is aware of all the work being performed. Provides for the suitable display of Permits and confirms appropriate.
4. Effectively communicates with Operations Day Supervisor, Shift Supervisor, DCS panel Operator and Area Authority all critical and potential impact to the facility or field operations to ensure work can proceed safely.
5. PTW Coordinators will participate in planning meetings for all major shutdown work. Provide feedback to plant supervision on improvement opportunities to the Permit to Work process and efficiently communicated with other PTW coordinators to ensure consistency with the PTW process.
6. Will work to Identify hazards and risks as applicable to related job site and work tasks and recommends mitigations to reduce residual hazards.
7. Is responsible to ensure there are adequate supplies of permits. Monitors and controls locks, keys, and associated devices for performing isolations (chains, tags etc.). Maintains appropriate level of training to administer PTW process. May be called on to perform PTW training.
8. Engage in all required procedures related to the PTW system operation and responsibilities
9. Ensure that all PTW system users have minimum required level of competency.
10. Help to plan and facilitate operational activities, such as routine, regulatory, and turnaround activities in the VG LNG facility which include utilities, pretreatment, liquefaction, storage & loading and Power Island.
11. Participate in Incident Command & Emergency Management drills & actuals. 

Qualifications:

Education and Certifications:  PTEC degree preferred or relevant process experience.

1. Experience:
1. Six (6) years’ working experience in commissioning, startup & operations in oil & gas, or petrochemical facilities, of which at least three (3) years must be in coordinating shutdown/turnaround activities.
2. At least ten (10) years working experience in Operations with LNG or other cryogenic hydrocarbon liquids and associated systems is preferred; however petrochemical and refining operational experience may be considered acceptable.

1. Skills:
1. Moderate leadership and administrative abilities are required.
2. Must have strong operational knowledge of the facility and equipment and be able to relate with associated construction and maintenance activities taking place in the entire complex.
3. Must have the skills necessary to coordinate multiple activities and understand the impact they have with other areas of the operation. Complete understanding of regulatory agency and company requirements concerning first line break, hot work, cold work, confined space, LOTO, JSA, etc. which are critical safeguards in the facility for the health and safety of the personnel, care and control of equipment and protection of the environment.
4. Must be able to adapt to changing conditions and make decisions with minimal supervision.
5. Must Have good communication skills to interact with company and contract personnel and possess knowledge to clearly understand hazardous associated with work performed.
6. The incumbent needs to be positive, and open-minded person, able to interact with other disciplines, self-motivating and able to work in a prompt fashion.
7. Must be a good planner and organizer.
8. Must be very conscious of the Quality, Health, Safety Security and Environment issues in the facility by attending meetings and daily communication with plant supervision.
9. Computer knowledge including Apple Mac, Microsoft Office Suite including Outlook, Word, Excel, Visio, Project & PowerPoint.
10. Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Direct Reports:

1. N/A.

Freedom to Act:

1. Permit to Work Coordinator will undergo initial training until he/she will have an understanding LNG liquefaction, storage and cargo loading operations and documentation.

Work Conditions:

1. Job is performed in an industrial plant environment.
2. Limited travel and temporary assignment required as business conditions dictate.
3. Subject to drug & alcohol testing, per applicable federal regulations or as required by Venture Global LNG.
4. While performing the duties of this job, the employee is often required to stand, walk, sit, climb stairs, work at height above ground on stairs and catwalks, balance, stoop, kneel, crouch, talk or hear, smell, type and write. 
5. Must be able to board a ship via a gangway, climb to the top of a tank (200+ steps), scale vertical steel ladder up to forty feet or more in height and lift and move objects weighting up to 30 pounds.
6. While performing the duties of this job, the employee will work indoors & outdoors, and be exposed to year-around weather conditions, ocean environment, and noise. There is a considerable number of outdoor activities involved.
7. Specific vision abilities required include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
8. Required to pass regularly scheduled physical examinations mandated by regulatory authorities.
9. Required to obtain mandated certification by attending Company-sponsored training in basic first aid, CPR, AED & LNG firefighting. 

ADA Job Requirements:

1. Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American‑produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid‑scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Supervisor, Laboratory to join our team at our LNG Plaquemines Facility located in Point Celeste, LA.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase. This entails establishing procedures and work instructions for sampling, testing, analysis, reporting and chemicals management. The incumbent shall establish the laboratory management procedure, quality manual and laboratory services contracts.

Post transition, the role will be responsible for overseeing the analysis of samples for a typical LNG plant, analysis of which shall include, but not necessarily be limited to:

• LNG composition
• Refrigerant composition
• Dewpoint (natural gas & other gases)
• Water (produced, waste, cooling)
• Amine solution
• Natural Gas Liquids (NGL, condensate)
• Oil (condition - viscosity, particles, ferrography)

The incumbent shall also be highly familiar with sampling procedures and associated laboratory equipment to perform analysis of the above components. As well as supervise and manage commissioning of laboratory testing equipment.

Responsibilities:

• Serves as a resident company Subject Matter Expert, providing advice and guidance on laboratory system issues
• Provide day-to-day laboratory oversight support to the operations laboratory to ensure laboratory tasks & requests are carried out timely with high degree of accuracy and efficiency
• Supervise a crew of laboratory technicians who will operate laboratory equipment to perform required analysis
• Coordinate training for laboratory technicians
• Maintain a maintenance and calibration program to ensure all analysis equipment are in top condition
• Inventory management of laboratory supplies and parts

 Qualifications:

• Education and Certifications: Associates Degree in Science, Chemistry or equivalent
• A minimum of ten (10) years’ experience working in a hydrocarbon laboratory
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of sampling and laboratory equipment is required
• Analytical skills in quality testing using gas chromatography especially LNG and condensate composition
• Knowledge of CMMS Systems
• Proficient with MS Office Suite

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non‑disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Reliability and Integrity to join our team.  

Location: Plaquemines Parish/Belle Chasse, LA

• This role reports to the Director, Operations Engineering and will be responsible for assisting the Operations team in developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.
• The activities encompass the concept around realizing improvements to equipment reliability and facilitating the migration from “Time-Based” to “Risk & Condition based. This will be applied to all equipment, systems, processes, and material in an LNG operations facility.
• The successful candidate shall be a technical generalist, with good working knowledge of gas processing plant equipment such as general machinery, pipings, pressure vessels, heat exchangers, storage tanks, instrumentations, and safety equipment.
• The incumbent shall also be intimately familiar with associated specifications, codes, and standards (API, ASME, ANSI & ISO) and have a solid understanding of Condition Monitoring & Risk-Based concepts.

Responsibilities:

• This incumbent shall provide support for groundwork support to the overall Asset Management Program by developing an Integrity Management Philosophy, with focus on, but not limited to the following areas:
• Equipment Strategies with Condition-Based & Risk-Based Inspection (RBI) approach
• Inspection & Repair scopes and methodologies
• Achieving regulatory and other certifications, for lifting devices & cylinders and safety pressure devices.
• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to effectively lead or participate in RCFA exercises for failures relating to plant equipment and/or processes.

Qualifications:

• Education and Certifications: 
• As a minimum, Bachelor’s degree in Engineering is required
• A Professional Engineering License would be a plus
• Experience: 
• A minimum of ten (10) years’ experience working in a similar senior engineering capacity, with Mechanical and process plant equipment in an industrial setting.
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Process Engineer to join our team in Point Celeste, Louisiana to support the Plaquemines Facility. This role reports to the Manager, Process Engineering, and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

The successful candidate will have strong design understanding and operational expertise of key equipment involved in LNG liquefaction facilities with demonstrable experiences working with Feed Gas and Pre-Treatment systems, Liquefaction and Refrigeration Systems, HHC Management systems, Storage and Loading / BOG management Systems.

 Responsibilities:

• Support the development and progression of the Ready for Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Provide daily support to plant Production personnel in troubleshooting process issues and concerns by integrating fundamental principles of fluid flow, heat transfer, thermodynamics, and hydrocarbon process chemistry
• Support the development and utilize Process Monitoring tools that monitor process efficiency and make improvement recommendations to enhance production and efficiency performance.
• Develop comprehensive Operations and Engineering procedures to support new and enhanced as well as special operating modes of the CP facility
• Provide Process Engineering support for plant shutdowns/turnarounds
• Perform economic evaluations of equipment alternatives with emphasis on availability and reliability projections and life cycle costs.
• Support process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits, and safety studies.
• Development of process simulations for process units, updates and modifies process simulation models.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor's degree in Chemical Engineering
• 3-5 years of operation experience with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Professional Engineer's (PE) License or equivalent CEng license is preferred.

• Experience: 
  • Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
  • Skilled in the application of relevant major design codes and standards.
  • Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status
• A minimum of five (5) years’ experience working in an engineering capacity in an industrial setting in engineering or operations
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Exhibit excellent written and oral communication skills.
• Experience in key aspects of process engineering from conceptual design, economics, detailed engineering, plant startup, operations, and troubleshooting.
• Commissioning, start-up, and performance testing at project sites is a plus.
• Strong understanding of key equipment involved in LNG liquefaction facilities.
• Additional Skills:

• Additional Skills:
• Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
• Skilled in the application of relevant major design codes and standards.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Specialist - Controls.

General Description:

The Maintenance Controls Specialist reports to the Maintenance Controls Supervisor and performs the safe, efficient and effective execution of all Controls (DCS), Programmable Logic Controllers (PLC), Safety Instrumented Systems (SIS), Fire and Gas (F&G), Analyzer systems maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Controls Technician is responsible for working with other Technicians, Supervisors within the Operations & Maintenance departments.

Responsibilities:

• Executes and oversees all Controls systems (such as DCS, PLCs, SIS, AMADAS, F&G and stand-alone applications) maintenance work within all PLNG HSSE process, procedures, standards and regulations.
• Ensures Control System Integrity by means of Function Test tracking, System Diagnostic tracking, & required regulatory reporting.
• Performs problem solving activities to ensure maintenance and reliability corrective measures are implemented.
• Functions as maintenance SME (Subject Matter Expert) for control systems.
• Ensure system inhibit and bypass accuracy and audits Inhibit bypass log weekly.
• Engage with projects team and assist in brownfield projects design.
• Responsible for implementation of MOC’s with an automation and control system scope.
• Participate in HAZOP, LOPAs, PHA, RCA, 3D model reviews, P&ID reviews,and Risk Assessments.
• Attend project FAT (Factory Acceptance Tests) and ensure quality SAT (Site Acceptance Tests) sign offs.
• Supervise and mentor Control System Technician work (Hardware Maintenance, Controller Tuning, Trip and Startup trouble shooting, Alarm management, and other Technician Responsibilities.)
• Review, redline, and develop Proof-tests and Function Tests procedures for Safety Instrumented Functions.
• Assist/perform SIS calculations and validations using site approved SIS validation tools.
• Review and redline Cause and Effects matrices.
• Implement major DCS configuration changes and process control upgrades.
• Responsible for In-Plant fiber schedule and designations.
• Assist in planning and oversee implementation of control system migrations.
• Interface with Vendors for Engineering Requests cases and technical issues.
• Take ownership of assigned Control System and ensure availability and reliability by interfacing with key stake-holders (Engineering, Operations, Maintenance, & Environmental.)
• Train and further develop in multiple control systems (ex. Yokogawa Prosafe, Yokogawa Centum VP, Delta V, Mark Vie, Rockwell, Siemens)
• Responsible for management of in plant communication networks.
• Support Electrical team with smart MCC’s configuration and network management.
• Responsible for control system back-ups and disaster recovery.
• Audit disaster recovery procedure and develop improved solutions.
• Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
• Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
• Create and prepare required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
• Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures.
• Key participant in maintenance processes such as daily work progress updates, maintenance work planning/schedule review meetings, backlog review meetings, among other meetings.
• Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
• Participate in PLNG Ready for Operations (RFO) maintenance projects to develop required maintenance systems, process and procedures before commercial operations.
• Manage personal timecard according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
• Holds personal accountability for own performance and behavior.

Qualifications:

• Education and Certifications

• Minimum of a high school diploma or GED; Technical degree, or applicable nationally recognized standard Certification. (i.e. NCCER / NICET)

• Experience:

• Minimum five (5) years of maintenance controls work experience in Oil & Gas, LNG or petrochemical facilities.
• Strong knowledge of electrical industrial standards and regulations (i.e. ISA, NFPA 70E, FERC, etc.)
• Strong work experience maintaining and troubleshooting controls systems, dedicated applications, Analyzer and F&G, such as – but not limited to, System administration, Backup/Recovery programs, Access Control, Alarm Management and Cybersecurity interfaces.
• Strong experience maintaining and troubleshooting DCS/SIS/PLCs and dedicated applications systems - Experience with the following systems is preferred:
  • Yokogawa Centum VP & ProSafe SIS
  • GE MarkVIe, MarkVIeS, and RXI
  • Allen Bradley RS Logics, Studio suite, RS linx, Control Logix, Compact Logix, and GuardLogix
  • Siemens 400 series PLC, Step 7 and PCS 7 software.
  • Delta V
• Applied knowledge of maintenance and troubleshooting of dedicated application systems such as - but not limited to, Rotating machinery vibration and speed monitoring systems, Tank Gauging systems, Loading arms, Mooring/Berthing aid systems, IGVs, FGVs, HMIs, among others.
• Experience in maintenance and troubleshooting of industrial network communication systems (Hardware and Software).
• Experience analyzing process events using Applicable historical SOE (Sequence of Events) functions.
• Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
• Work experience with small/medium scale DCS/PLCs projects is a plus.

Skills:

• Strong leadership and organizational skills are required.
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies.
• Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
• Promote continuous improvements initiatives.
• Able to work with a culturally diverse group of technical individuals.
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations.
• Exceptional problem solving and analytical skills.
• Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
• Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Technician – Electrical.

Location: Plaquemines Parish/Belle Chasse - Point of Reference: 19000 LA-23, Pointe Celeste, 70083

General Description:

The Maintenance Electrical Technician reports to the Maintenance Electrical Supervisor and performs the safe, efficient, and effective execution of all electrical maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Electrical Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments.

Responsibilities:

1. Executes preventive and corrective maintenance electrical work according to PLNG HSSE process, procedures, standards, and regulations.
2. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
3. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
4. Performs problem solving activities to ensure maintenance and reliability issues corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Electrical systems.
5. Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
6. Works with maintenance and engineering counterparts to ensure the safe completion of scheduled maintenance work.
7. Responsible for daily work progress reports and updates, adhering to maintenance work execution processes and procedures, among other activities.
8. Manage personal timecard according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
9. Supervises contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
10. Provide mentoring and coaching to others and holds personal accountability for performance and behavior.
11. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility.
12. Participate in PLNG Ready for Operations (RFO) maintenance projects to develop required maintenance systems, process, and procedures before commercial operations.
13. Supports Electrical equipment factory acceptance test (FAT) and site acceptance test (SAT, as required.
14. Participate in pre-commissioning, commissioning, startup, and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor.
15. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D models and P&ID reviews.

Qualifications:

1. Education and Certifications:
• Minimum of a high school diploma or GED; Technical degree in Electrical, or applicable nationally recognized standard Certification. (i.e., NCCER / NICET)
2. Experience:
• Minimum Five (5) years of maintenance electrical technician work experience in Oil & Gas, LNG, or petrochemical facilities.
• Strong knowledge of electrical industrial standards and regulations (i.e., NETA, NFPA 70E / 70B, NEC).
• Knowledge of Power Generation (Steam Turbine, HRSG, and Diesel Generator) and Distribution.
• Applied knowledge of electrical and controls such as medium and low-voltage generators, motors, switchgear, motor control centers, Variable Speed Drives (VFD and VSDS), circuit breakers, protective and network relaying, fuses, cabling, power, current instrument and transformers, Lighting, HVAC, AC Inverters and DC Chargers, batteries Control Systems etc.
• Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
• Support of small/medium scale electrical projects.
• Experience working on Electrical Systems 5Kv-138Kv

Skills:

1. Strong leadership and organizational skills are required.
2. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries, and governmental agencies
3. Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
4. Credibility to set high standards and promote continuous improvements initiatives.
5. Able to work with a culturally diverse group of technical individuals.
6. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
7. Exceptional problem solving and analytical skills.
8. Able to operate Industrial Mobile Equipment (i.e., Forklift truck, Aerial Lift, etc...)
9. Able to work at elevated height(s) over.
10. Able to work over water and operate watercraft.
11. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
12. Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Manager.

General Description:

The Operations Manager reports to the Director, Operations, and will support the daily O&M activities involving the safe and effective operation of the Venture Global Plaquemines production units. The Operations Manager is a pivotal leadership role within our organization, supporting the Director, Operations in executing strategic objectives and management of Operations programs and initiatives to meet the organization’s goals. He / She further supports the Day and Shift Superintendents in tactical activities, including execution of operational and people management tasks and other functions as directed for successful operations. This position requires a self-motivated, dynamic and results-driven individual who can collaborate effectively with various stakeholders, including staff, community partners, and funding agencies. The ideal candidate will have a proven track record in developing and implementing processes and structures in line with an emerging Operations framework, demonstrate maturity in personnel management, and financial oversight. He / She must be a Safety leader, able to demonstrate and drive a strong safety culture within the wider team, as well as operational ownership, accountability and discipline. Candidates must have exceptional communication and leadership skills, with an ability to navigate complex challenges while maintaining a positive and inclusive work environment. The Operations Manager will assist in formulating policies, setting departmental objectives, and evaluating program outcomes. Additionally, they will lead special projects, facilitate staff development, and represent the organization at community events and meetings. 

Responsibilities:

• Operational Efficiency: Overseeing and optimizing all aspects of the LNG process, from natural gas intake to LNG loading and shipping.
• Safety Management: Ensuring adherence to strict safety protocols and regulations, including process safety and emergency response procedures. Heavily involved in the management of programs including Car Seals, Bypasses and Management of Change. Provides leadership in Emergency situations as required.
• Team Leadership: Managing and mentoring a team of process operators, technicians, and other personnel, providing guidance and support to ensure effective performance.
• Process Optimization: Identifying and implementing process improvements to enhance efficiency, reduce costs, and improve overall plant performance. Ensures monthly and annual operating plans, as defined by Operational KPIs are achieved by the team.
• Compliance and Reporting: Ensuring compliance with all applicable regulations and industry standards, maintaining accurate records, and preparing reports as required.
• Budget Management: supporting the development of and managing the operational budget for the LNG plant, ensuring efficient resource allocation and cost control.
• Problem Solving: Quickly identifying and resolving operational issues, ensuring minimal disruption to plant operations.
• Stakeholder Communication: Communicating effectively with internal and external stakeholders, including management, regulatory agencies, and customers. 
• Maintenance interventions: Manage operational continuity and minimize downtime  during periods of planned and unplanned maintenance activities.

Qualifications:

• Education: Bachelor's degree in engineering (chemical, mechanical, or related field) or 5 plus years equivalent experience.
• Experience: Extensive experience in LNG or other petrochemical operations, with a strong understanding of process control, safety, and regulatory requirements.
• Experience in operations of CCGTs, preferably with GE 7EA and A200 STG configurations.  Additional CC configurations and Air-Cooled Condensers (ACCs) experience also a plus. Commissioning, startup and operations in Oil & Gas, petrochemical, or Independent Power Producer (IPP) facility along with internal electrical distribution systems.
• Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Skills and Abilities:

• Leadership: Proven leadership skills, with the ability to motivate and manage a team effectively.
• Technical Skills: Strong technical skills in process control, instrumentation, and automation.
• Problem-Solving: Excellent problem-solving and decision-making skills, with the ability to handle complex situations.
• Communication: Excellent communication and interpersonal skills, with the ability to work effectively with diverse teams.
• Adaptability: Ability to competently act as Shift Supervisor and/or Superintendent with knowledge and skills to operate the board if deemed necessary.
• High level of HSE knowledge
• Ability to address personnel HR issues from a viewpoint of fairness and practicability
• Demonstrated to be a participative leader that offers opinion and direction
• Direct Reports: None

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Technician - Instrumentation.

Location: Plaquemines Parish/Belle Chasse - Point of Reference: 19000 LA-23, Point Celeste, 70083

General Description:

The Maintenance Instrumentation Technician reports to the Maintenance Instrumentation Supervisor and performs the safe, efficient, and effective execution of all Instrumentation maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Instrumentation Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments.

Responsibilities:

• Executes preventive and corrective maintenance instrumentation work according to PLNG HSSE process, procedures, standards, and regulations.
• Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
• Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
• Performs problem solving activities to ensure maintenance and reliability corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Instrumentation systems.
• Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
• Works along with Operations, Maintenance and Engineering counterparts to ensure the safe completion of maintenance work.
• Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures.
• Manage personal timecard according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
• Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
• Provide mentoring and coaching to others and holds personal accountability for performance and behavior.
• Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility.
• Participate in PLNG Ready for Operations (RFO) maintenance projects to develop required maintenance systems, process, and procedures before commercial operations.
• Supports Instrument equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required.
• Participate in pre-commissioning, commissioning, startup, and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor.
• Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D models and P&ID reviews.
• Qualifications:

Education and Certifications

• Minimum of a high school diploma or GED; Technical degree in Instrumentation, or applicable nationally recognized standard Certification. (i.e., NCCER / NICET)
• Experience:
• Minimum Five (5) years of maintenance Instrumentation work experience in Oil & Gas, LNG, or petrochemical facilities.
• Strong knowledge of electrical industrial standards and regulations (i.e., ISA, NFPA 70E, FERC, etc.)
• Strong knowledge of preventive and corrective maintenance of Instrumentation equipment.
• Applied knowledge of maintenance and inspection of Instrumentation equipment such as - but not limited to, Antisurge valves Accessories/Positioners, Motorized Operated Valves (MOV), Triple Off-Set valves, Rotating machinery vibration and speed monitoring systems, Tank Gauging systems, Loading arm and Mooring/Berthing aid systems, IGVs, FGVs, Hydraulic valves, Limit Switches, Ignition Systems, Cryogenics valves, Control Valves/Accessories/Positioners, ESD/BDV valves, DCS/PLC/SIS Systems and Hardware, etc.
• Experience/Knowledge of Yokowaga DCS system, BHGE MarkVIe, GC Analyzers (i.e., AMADAS) systems is a plus.
• Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
• Work experience in small/medium scale instrumentation projects.

Skills:

• Strong leadership and organizational skills are required.
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies
• Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
• Credibility to set high standards and promote continuous improvements initiatives.
• Able to work with a culturally diverse group of technical individuals.
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Exceptional problem solving and analytical skills.
• Able to operate Industrial Mobile Equipment (i.e., Forklift truck, Aerial Lift, etc...)
• Able to work at elevated height(s) over.
• Able to work over water and operate watercraft.
• Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
• Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Instrument & Controls to join our team in Point Celeste, LA at the Plaquemines Parish Facility in Louisiana.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall be a technical SME in the Instrument & Controls Engineering discipline with in-depth understanding on Process Control & Distributed Controls System (DCS).

The incumbent shall also be highly familiar navigating/interrogating the DCS to perform tasks such as tuning of loops, initiating control changes as required utilizing VGLNG’s management of change (MoC) process together with any Cause and Effect (C&E) and DCS graphic changes, and champion the Advanced Process Control initiative. 

Expert knowledge in general plant Instrumentations & field devices, used in the Oil & Gas industry is key in successful performance of this job, such as:

• Distributed Controls Systems (DCS)
• Analyzers & Chromatographs
• Valves & Solenoids
• Transmitters & Sensing elements
• Flow meters

 Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

Responsibilities:

• Serves as a resident company Subject Matter Expert, providing advice and guidance on Instrument & Controls system engineering issues.
• Provide daily-to-day Instrument & Controls systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
• Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage. Support Process Trip investigations.
• Provide general support to Analyzer associated issues.
• Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
  • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
• Support Alarm Management program.
• Responsible for Management of Change for Alarm/Trip settings.
• Provide support to the Maintenance team for Turnaround planning and execution.
• Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Instrument & Controls systems throughout the plant.

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Controls, Instrument or Electrical Engineering
  • A Professional Engineering License or eligibility for registration. 

• Experience: 
  • A minimum of fifteen (10) years’ experience working in a senior engineering capacity, with Instrument & Controls equipment in an industrial setting in engineering or operations.
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
  • Good working knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required 
• Additional Skills: 
  • Working knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Marine Coordinator.

Location: Plaquemines Parish/Belle Chasse Area - Point of Reference:  19000 LA-23, Point Celeste, 70083

General Description:

The Marine Coordinator reports to the Marine Supervisor and will work to ensure implementation and adherence to requirements of the Venture Global LNG HSSE management system and those specific accountabilities documented in the Marine Operations policies & procedures manual. The Marine Coordinator is expected to remain abreast of all safety developments & systems to assist and advise the Marine Supervisor on pertinent issues. This role is expected to monitor all components of marine activities and will support, investigate, and correct any identified safety issues. The Marine Coordinator may at any time stop work activities if any task is being performed in an unsafe or unsatisfactory manner. The marine coordinator will work a schedule based on operational activity and is expected to be present during any major activity or operations. The is a typically 12-hour day but must be available to address HSSE issues and requirements should the situation become necessary. This is a leadership role which will include mentoring personnel during marine functions. The coordinators will coach, teach, and train members of the marine organization to ensure that all PLNG HSSE policies and procedures are carefully followed.

Responsibilities:

• Must be familiar with standard international LNG carrier ship equipment & operations as it pertains to spray pumps, cargo pumps, high & low duty compressors, gas heaters, LNG & forcing vaporizers, nitrogen generator, inert gas & dry air systems, gassing up & cooling down cargo tanks, NCOE (USCG National Center of Expertise).
• Must understand and be familiar the regulatory requirements of 33CFR 127 including USCG Operations & Emergency Manual and Marine Operating Manual.
• Marine Coordinator (PIC’s) will ensure all marine work is being performed with the use and control of the CPLNG PTW work system.
• Will performs onsite audits of work taking place to ensure compliance with PTW and all applicable policies, procedures and regulations are being enforced. PIC’s will close all work permits and ensures appropriate documentation is properly filed.
• Must keep Marine Supervisor advised of any safety, environmental, regulatory compliance, or other operational issues.
• Will maintain PIC (Persons-In-Charge of loading) status to include the usage of all forms and instructions during ship operations. These will include and not limited to; pre/post loading agenda, DoS (safety & security), cargo loading plan, ship/shore safety, NOR, cargo manifest, certificate of origin, quality, quantity, document receipts, marine GC calibration & verification, etc.
• Must be familiar with small vessel operations e.g., tugs, pilot vessels, production plant operations, marine terminal operations, hydrocarbon liquid operations.
• Work communicates with surveyors for all product specification issues and understand automatic sampling system.
• Must know & understand battery limit process streams, BOG system, ESD valve locations & PSV systems.
• Must be able to explain the LNG storage tanking system & pumps, hydraulic ESD valves, connecting & disconnecting and cool-down loading arm operation (liquid & vapor), jetty operations, ship gangway, mooring system. Loading arm clearing and vapor return system.
• The Marine Coordination as the PIC must be familiar with berthing thresholds based on environmental, regulatory, and pre-determined operating criteria for LNG carrier approach, mooring and LNG loading.
• Works with Operations, Maintenance, Lab, and other departments & disciplines for input into all marine activities that could impact operations at the jetties.

Qualifications:

Education and Certifications: 

Experience:

• Prior experience as a marine coordinator is preferred.
• PTEC degree with a marine coordinator PIC qualification is desirable.
• Should be familiar with small vessel operation e.g., tugs, pilot vessels, production plan marine operations, hydrocarbon liquid and gas tanker operations, and industry best practices.
• A high level of computer ability skills is essential.
• Minimum of (3) three years as a marine coordinator on an onshore/offshore installation either floating or fixed, marine hydrocarbon terminal operation, or an LNG carrier tanker.
• At least ten (10) years working experience in Operations with LNG or other cryogenic hydrocarbon liquids and associated systems is preferred.

 Skills:

• Moderate leadership and administrative abilities are required.
• Must have strong operational knowledge of the facility and equipment and be able to relate with associated construction and maintenance activities taking place in the entire complex.
• Must have the skills necessary to coordinate multiple activities and understand the impact they have with other areas of the operation. Complete understanding of regulatory agency and company requirements concerning first line break, hot work, cold work, confined space, LOTO, JSA, etc. which are critical safeguards in the facility for the health and safety of the personnel, care and control of equipment and protection of the environment.
• Must be able to adapt to changing conditions and make decisions with minimal supervision.
• Must Have good communication skills to interact with company and contract personnel and possess knowledge to clearly understand hazardous associated with work performed.
• The incumbent needs to be a positive, and open-minded person, able to interact with other disciplines, self-motivating and able to work in a prompt fashion.
• He or she must be a good planner and organizer
• He/she must be very conscious of the Quality, Health, Safety Security and Environment issues in the facility by attending meetings and daily communication with plant supervision.
• Computer knowledge including Apple Mac, Microsoft Office Suite including Outlook, Word, Excel, Visio, Project & PowerPoint.
• Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Direct Reports:

N/A.

Freedom to Act:

Marine Coordinator will undergo initial training until he/she will have an understanding LNG liquefaction, storage and cargo loading operations and documentation.

Work Conditions:

• Job is performed in an industrial plant environment.
• Limited travel and temporary assignment required as business conditions dictate.
• Subject to drug & alcohol testing, per applicable federal regulations or as required by Venture Global LNG.
• While performing the duties of this job, the employee is often required to stand, walk, sit, climb stairs, work at height above ground on stairs and catwalks, balance, stoop, kneel, crouch, talk or hear, smell, type and write. 
• Must be able to board a ship via a gangway, climb to the top of a tank (200+ steps), scale vertical steel ladder up to forty feet or more in height and lift and move objects weighting up to 30 pounds.
• While performing the duties of this job, the employee will work indoors & outdoors, and be exposed to year-around weather conditions, ocean environment, and noise. There is a considerable number of outdoor activities involved.
• Specific vision abilities required include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
• Required to pass regularly scheduled physical examinations mandated by regulatory authorities.
• Required to obtain mandated certification by attending Company-sponsored training in basic first aid, CPR, AED & LNG firefighting.

ADA Job Requirements:

Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Technician - Controls.

Location: Plaquemines Parish/Belle Chasse - Point of Reference: 19000 LA-23, Point Celeste, 70083

General Description:

The Maintenance Controls Technician reports to the Maintenance Controls Supervisor and performs the safe, efficient, and effective execution of all Controls (DCS), Programmable Logic Controllers (PLC), Safety Instrumented Systems (SIS), Fire and Gas (F&G), Analyzer systems maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Controls Technician is responsible for working with other Technicians, Supervisors within the Operations & Maintenance departments.  

Responsibilities:

1. Building configuration control schemes on Honeywell TDC-3000 and/or Honeywell C-300; ability to demonstrate prior support experience on DCS, SIS and F&G Systems.
2. Executes all Controls systems (such as DCS, PLCs, SIS, AMADAS, F&G and stand-alone applications) maintenance work within all PLNG HSSE process, procedures, standards, and regulations.
3. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
4. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
5. Performs problem solving activities to ensure maintenance and reliability corrective measures are implemented.
6. Functions as Maintenance SME (Subject Matter Expert) for control systems.
7. Create and prepare required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
8. Works along with operations, maintenance, and engineering counterparts to ensure the safe completion of scheduled maintenance work.
9. Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures.
10. Key participant in maintenance processes such as daily work progress updates, maintenance work planning/schedule review meetings, backlog review meetings, among other meetings.
11. Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
12. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility.
13. Participate in PLNG Ready for Operations (RFO) maintenance projects to develop required maintenance systems, process, and procedures before commercial operations.
14. Supports Controls equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required.
15. Participate in pre-commissioning, commissioning, startup, and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor.
16. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D models and P&ID reviews.
17. Manage personal timecard according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
18. Holds personal accountability for own performance and behavior.
19. Provides mentoring and coaching to junior peers and counterparts.
20. Assist with training and mentoring coworkers. Sharing our knowledge and experience not only strengthens our team but also promotes a collaborative work environment.
21. Contribute to the plant's housekeeping duties. Maintaining a clean and organized workplace is vital for our safety and efficiency. These tasks are expected, essential, and mandatory for all employees. 

Qualifications:

1. Education and Certifications
• Minimum of a high school diploma or GED; Technical degree, or applicable nationally recognized standard Certification. (i.e., NCCER / NICET). Equivalent experience also considered. 
2. Experience:
   • Yokogawa DCS & ProSafe SIS
   • GE MarkVIe and MarkVIeS
   • Allen Bradley ControlLogix and GuardLogix
   • Siemens PLC, Honeywell
• Minimum five (5) years of maintenance controls work experience in Oil & Gas, LNG, or petrochemical facilities.
• Strong knowledge of electrical industrial standards and regulations (i.e., ISA, NFPA 70E, FERC, etc.)
• Strong work experience maintaining and troubleshooting controls systems, dedicated applications, Analyzer and F&G, such as – but not limited to, System administration, Backup/Recovery programs, Access Control, Alarm Management and Cybersecurity interfaces.
• Strong experience maintaining and troubleshooting DCS/SIS/PLCs and dedicated applications systems - Experience with the following systems is preferred:
• Experience with GC Analyzer Systems (such as AMADAS) as well F&G Systems (Field and Buildings).
• Applied knowledge of maintenance and troubleshooting of dedicated application systems such as - but not limited to, Rotating machinery vibration and speed monitoring systems, Tank Gauging systems, Loading arms, Mooring/Berthing aid systems, IGVs, FGVs, HMIs, among others.
• Experience in maintenance and troubleshooting of industrial network communication systems (Hardware and Software).
• Experience analyzing process events using Real Time Sampling (RTIS) applications is a plus.
• Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
• Work experience with small/medium scale DCS/PLCs projects is a plus.
• Strong background in programming, maintaining, and troubleshooting of Allen-Bradley platforms, such as ControlLogix, CompactLogix, GuardLogix, FactoryTalkView SE, ME, and Station.
• Should understand  the configuration and troubleshooting of Modbus communications across multiple platforms (Prosoft, Redlion, Allen-Bradley, and Siemens) to Honeywell SCADA Interface.
• Background in maintaining and troubleshooting Siemens platforms such as S7-1500, PCS7, and WINCC is a plus.

Skills:

1. Strong leadership and organizational skills are required.
2. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries, and governmental agencies
3. Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
4. Promote continuous improvements initiatives.
5. Able to work with a culturally diverse group of technical individuals.
6. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
7. Exceptional problem solving and analytical skills.
8. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
9. Must be able to acquire and maintain a Transportation Worker Identification Credential (TWIC) card.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Engineer, Rotating Equipment to join our team in Point Celeste, LA at our Plaquemines Parish facility.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall be a technical SME for rotating equipment, with in-depth understanding on drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.

Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

The incumbent is also expected to provide guidance and mentorship to less experienced staff associated with maintaining and operating plant equipment, to ensure the highest level of asset availability.

Responsibilities:

• Serves as a resident company Subject Matter Expert, providing advice and guidance on Rotating Equipment system engineering issues.
• Provide daily-to-day Rotating Equipment and Mechanical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
  • Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage.
  • Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
    • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
  • Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
  • Provide support to the Maintenance team for Turnaround planning and execution.
  • Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Rotating Equipment systems throughout the plant.
  • Reliability Centered Maintenance (RCM): Lead initiatives to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective. 

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required
  • Mechanical Engineering focus is preferred. 
  • A Professional Engineering License is preferred.

• Experience: 
  • A minimum of 3-5 years’ experience working in a senior engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
    • Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required 

• Additional Skills:
  • Knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Staff Engineer, Rotating Equipment to join our team in Point Celeste, LA at our Plaquemines Parish Facility in Louisiana.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall be a technical SME for rotating equipment, with in-depth understanding on drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.

Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

The incumbent is also expected to provide guidance and mentorship to less experienced staff associated with maintaining and operating plant equipment, to ensure the highest level of asset availability.

Responsibilities:

• Serves as a resident company Subject Matter Expert, providing advice and guidance on Rotating Equipment system engineering issues.
• Provide daily-to-day Rotating Equipment and Mechanical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
  • Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage.
  • Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
    • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
  • Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
  • Provide support to the Maintenance team for Turnaround planning and execution.
  • Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Rotating Equipment systems throughout the plant.
  • Reliability Centered Maintenance (RCM): Lead initiatives to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective. 

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required
  • Mechanical Engineering focus is preferred. 
  • A Professional Engineering License is preferred.

• Experience: 
  • A minimum of ten to fifteen (10-15) years’ experience working in a senior engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
    • Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required 

• Additional Skills:
  • Knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.