HARNESSING ENGINEERING SPECIALIST, SATELLITES (STARLINK)

We’re looking for a talented Harnessing Engineer Specialist to develop satellite harnessing designs and drive improvements across electrical and optical wiring products. On the avionics & harnessing engineering team, you will be responsible for releasing satellite harnessing design and drawings, as well as qualifying interconnects and cables across our various satellite configurations. You will work closely with responsible engineers focused on driving new component selections across various bus/power and optical harnessing products and executing on component and subsystem qualification/testing.

This role has high exposure across our various satellite vehicle subsystems and befits one who is highly collaborative and motivated to take on challenging work – both hands-on building harnessing products + processes and execute/release detailed wire harness designs.

RESPONSIBILITIES:

COMPENSATION AND BENEFITS:              

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. 

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

POWER ELECTRONICS ENGINEER, SATELLITES (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 10M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

RESPONSIBILITIES:

• Provide engineering expertise in design, analysis, and testing of DC-DC power converters for harsh environments
• Work on electrical power system and sub-system level design trades and develop requirements
• Define and perform electrical power system verification testing and analysis
• Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline 
• 1+ years of professional experience in power converter development 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering or related field
• Strong grasp of analog control and discrete logic design
• Experience in modeling, simulation, and testing of power electronics
• Working experience in voltage and current mode control and compensation design
• Experience with AC-DC converters and power factor correction
• Strong grasp of DC-DC topologies, with ability to select optimal architectures and components
• Understanding of design for fault tolerance and reliability
• Familiar with failure mode effects and criticality analysis
• Familiarity with design of wire wound and planar inductors and transformers
• Familiarity with power supply testing and packaging for harsh environments
• Experience with in-lab impedance measurement and loop-gain measurement
• Familiarity with spacecraft electrical power systems and knowledge of radiation effects
• Familiarity with solar arrays as input power sources
• Familiarity with lithium-ion battery handling, safety, and usage

 ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday 

HARDWARE DEVELOPMENT ENGINEER, POWER (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 10M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

RESPONSIBILITIES:

• Provide engineering expertise in design, analysis, and testing of DC-DC power converters for harsh environments
• Work on electrical power system and sub-system level design trades and develop requirements
• Define and perform electrical power system verification testing and analysis
• Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline 
• 1+ years of professional experience in power converter development 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering or related field
• Strong grasp of analog control and discrete logic design
• Experience in modeling, simulation, and testing of power electronics
• Working experience in voltage and current mode control and compensation design
• Experience with AC-DC converters and power factor correction
• Strong grasp of DC-DC topologies, with ability to select optimal architectures and components
• Understanding of design for fault tolerance and reliability
• Familiar with failure mode effects and criticality analysis
• Familiarity with design of wire wound and planar inductors and transformers
• Familiarity with power supply testing and packaging for harsh environments
• Experience with in-lab impedance measurement and loop-gain measurement
• Familiarity with spacecraft electrical power systems and knowledge of radiation effects
• Familiarity with solar arrays as input power sources
• Familiarity with lithium-ion battery handling, safety, and usage

 ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday 

SR. SPACE LASERS ENGINEER, SATELLITES (STARLINK)

The Starlink Space Lasers team develops, produces, and deploys the most cutting-edge satellite free-space optical communication systems in the world. We are looking for engineers to contribute to the development of laser communications terminals and imaging products for the groundbreaking constellation of Starlink satellites. All SpaceX optical systems (laser communication terminal and other optical products) require a blend of theoretical expertise, practical implementation skills, and a passion for solving complex problems in real-time, resource-constrained systems.

As a SpaceX optical engineer, you will be responsible for free-space optical system design, validation, and operation. You will shape the future of laser communication systems and directly contribute to mission-critical applications such as next-generation star tracking system for precise navigation in space environments. You will build reliable, efficient systems by leading

RESPONSIBILITIES:

• Apply optics and photonics knowledge to optical system development, including design, analysis, and validation
• Represent the optical system in program-level, cross-disciplinary trades and issue resolution
• Define requirements for high-performant optical systems in challenging environmental conditions
• Lead optical architecture definition through internal trade studies, concept of operations definition, and risk reduction testing
• Participate in verification testing, including environmental qualification, performance characterization, reliability testing, and fault injection testing
• Define and lead field testing of optical experiments and laser communication systems
• Review test data and lead anomaly investigation and resolution
• Maintain link budgets, design specifications, and system capabilities data
• Interface with manufacturing and supply chain teams to ensure final designs can be manufactured in accordance with overall project goals
• Collaborate with software and automation teams to develop tools and protocols for automated optical testing
• Represent laser communications systems for reliability and risk discussions with internal reliability teams, management, customers, and vendors

BASIC QUALIFICATIONS:

• Bachelor’s degree in physics, computer science, electrical engineering, or other engineering/STEM discipline
• 2+ years of hands-on laboratory or work experience in optics, photonics, laser technology, or precision mechanical design or testing (university lab, student project, or internship experience qualifies)
• 1+ years of experience in a computer programming language (e.g. C++, MATLAB, and/or Python)

PREFERRED SKILLS AND EXPERIENCE:

• Master's degree or PhD in physics or an engineering discipline
• Proficiency with optical analysis tools such as Zemax
• Hands-on experience in optical design or system design, integration, and test of laser communication systems
• Knowledge of and experience in lasers, photodiodes, fiber optics, optics testing/troubleshooting techniques, and signal integrity principles
• Knowledge of and experience in free-space optical principles, optical component testing/troubleshooting techniques, precision metrology techniques, manufacturing and integration processes
• Experience leading development of commercial communications products
• Experience with hardware development for high-reliability applications
• Experience with pointing, acquisition, and tracking
• Knowledge of and experience in atmospheric optical effects
• Ability to assess risk and make design and development decisions without all available data
• Ability to work in a fast paced, autonomously driven, and demanding atmosphere
• Competence with optical test equipment (power meters, interferometer, laser sources)
• Experience with infrared system alignment and characterization
• Competence with Python scripting and a Linux operating system environment
• Excellent written and verbal communication skills

ADDITIONAL REQUIREMENTS:

• Working extended hours and weekends as needed

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

SR. POWER ELECTRONICS ENGINEER, STATELLITES (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

RESPONSIBILITIES:

• Provide engineering expertise in design, analysis, and testing of DC-DC power converters for harsh environments
• Work on electrical power system and sub-system level design trades and develop requirements
• Define and perform electrical power system verification testing and analysis
• Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering
• 5+ years of experience in power converter development
• Previous experience with DC-DC power converter development
• Previous experience working with magnetics and design of custom transformers and inductors, including planar magnetics
• Experience in modeling, simulation, and testing of power electronics

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering or related field
• Strong grasp of analog control and discrete logic design
• Experience in modeling, simulation, and testing of power electronics
• Working experience in voltage and current mode control and compensation design
• Experience with AC-DC converters and power factor correction
• Strong grasp of DC-DC topologies, with ability to select optimal architectures and components
• Understanding of design for fault tolerance and reliability
• Familiar with failure mode effects and criticality analysis
• Familiarity with design of wire wound and planar inductors and transformers
• Familiarity with power supply testing and packaging for harsh environments
• Experience with in-lab impedance measurement and loop-gain measurement
• Familiarity with spacecraft electrical power systems and knowledge of radiation effects
• Familiarity with solar arrays as input power sources
• Familiarity with lithium-ion battery handling, safety, and usage

 ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

ELECTRICAL ON-ORBIT HARDWARE RELIABILITY ENGINEER, SATELLITES (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer products that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

As a Satellite On-Orbit Hardware Reliability Engineer on Starlink, you will track, investigate, and analyze electrical and mechanical hardware failure modes on the largest space vehicle fleet in history. Your daily work will include a combination of hardware testing, on-orbit data analysis, and collaboration with design, production, and operations engineers to act in response to on-orbit hardware anomalies. You will use a mixture of electrical engineering analysis, statistical methods, and on-orbit experiments to achieve root cause for various failure mode investigations. You will provide critical insight at multiple points in the design and production process to ensure that hardware reliability increases over time. Your experience will span the full scale of Starlink’s satellite engineering process: from the detailed physics of failure in a single hardware component, to its implications for the entire constellation, to the decisions made for future designs.

RESPONSIBILITIES:

• Analyze and track on-orbit hardware failures for the Starlink satellite constellation
• Drive root cause investigation for major on-orbit hardware anomalies
• Perform electrical bench testing and develop engineering models of failures to root cause and mitigate hardware anomalies
• Work closely with engineers from adjacent disciplines (electrical, mechanical, thermal, software, test, operations, production) to eliminate sources of on-orbit failure
• Drive continual improvements to our constellation by building and using tools to analyze data collected both on-orbit and in ground testing
• Continuously improve the feedback loop from space using a mix of effective communication and automation

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline
• 1+ years of professional experience in hardware development, hardware troubleshooting, or data analysis (internship/co-op experience is accepted)
• 1+ years of experience with Python and/or SQL

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering, computer engineering, or similar engineering degree
• Demonstrated ability to work in a highly cross-functional role
• Experience analyzing/designing electrical circuits and developing functional test plans
• Experience with PCBA test equipment and measurement techniques (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.)
• Strong understanding of computers and programming languages (Python, C/C++)
• Strong understanding of time series data analysis and reliability statistics
• Strong understanding of failure mechanisms for electronic, mechanical, or optical systems
• Experience leading failure investigations and root cause analysis
• Experience performing environmental tests such as HALT/HASS campaigns, thermal cycling, vibration and shock testing, space environment effects testing

ADDITIONAL REQUIREMENTS:

• Willing to work extended hours and weekends as needed for mission critical deadlines
• Strong interpersonal and collaborative skills, enthusiasm for innovation, and commitment to improving reliability in cutting-edge technology

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

SPACE LASERS ENGINEER, SATELLITES (STARLINK)

The Starlink Space Lasers team develops, produces, and deploys the most cutting-edge satellite free-space optical communication systems in the world. We are looking for engineers to contribute to the development of laser communications terminals and imaging products for the groundbreaking constellation of Starlink satellites. All SpaceX optical systems (laser communication terminal and other optical products) require a blend of theoretical expertise, practical implementation skills, and a passion for solving complex problems in real-time, resource-constrained systems.

As a SpaceX optical engineer, you will be responsible for free-space optical system design, validation, and operation. You will shape the future of laser communication systems and directly contribute to mission-critical applications such as next-generation star tracking system for precise navigation in space environments. You will build reliable, efficient systems by leading

RESPONSIBILITIES:

• Apply optics and photonics knowledge to optical system development, including design, analysis, and validation
• Represent the optical system in program-level, cross-disciplinary trades and issue resolution
• Define requirements for high-performant optical systems in challenging environmental conditions
• Lead optical architecture definition through internal trade studies, concept of operations definition, and risk reduction testing
• Participate in verification testing, including environmental qualification, performance characterization, reliability testing, and fault injection testing
• Define and lead field testing of optical experiments and laser communication systems
• Review test data and lead anomaly investigation and resolution
• Maintain link budgets, design specifications, and system capabilities data
• Interface with manufacturing and supply chain teams to ensure final designs can be manufactured in accordance with overall project goals
• Collaborate with software and automation teams to develop tools and protocols for automated optical testing
• Represent laser communications systems for reliability and risk discussions with internal reliability teams, management, customers, and vendors

BASIC QUALIFICATIONS:

• Bachelor’s degree in physics, computer science, electrical engineering, or other engineering/STEM discipline
• 2+ years of hands-on laboratory or work experience in optics, photonics, laser technology, or precision mechanical design or testing (university lab, student project, or internship experience qualifies)
• 1+ years of experience in a computer programming language (e.g. C++, MATLAB, and/or Python)

PREFERRED SKILLS AND EXPERIENCE:

• Master's degree or PhD in physics or an engineering discipline
• Proficiency with optical analysis tools such as Zemax
• Hands-on experience in optical design or system design, integration, and test of laser communication systems
• Knowledge of and experience in lasers, photodiodes, fiber optics, optics testing/troubleshooting techniques, and signal integrity principles
• Knowledge of and experience in free-space optical principles, optical component testing/troubleshooting techniques, precision metrology techniques, manufacturing and integration processes
• Experience leading development of commercial communications products
• Experience with hardware development for high-reliability applications
• Experience with pointing, acquisition, and tracking
• Knowledge of and experience in atmospheric optical effects
• Ability to assess risk and make design and development decisions without all available data
• Ability to work in a fast paced, autonomously driven, and demanding atmosphere
• Competence with optical test equipment (power meters, interferometer, laser sources)
• Experience with infrared system alignment and characterization
• Competence with Python scripting and a Linux operating system environment
• Excellent written and verbal communication skills

ADDITIONAL REQUIREMENTS:

• Working extended hours and weekends as needed

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

POWER ELECTRONICS ENGINEER, SATELLITES (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 9M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

RESPONSIBILITIES:

• Provide engineering expertise in design, analysis, and testing of DC-DC power converters for harsh environments
• Work on electrical power system and sub-system level design trades and develop requirements
• Define and perform electrical power system verification testing and analysis
• Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline 
• 1+ years of professional experience in power converter development 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering or related field
• Strong grasp of analog control and discrete logic design
• Experience in modeling, simulation, and testing of power electronics
• Working experience in voltage and current mode control and compensation design
• Experience with AC-DC converters and power factor correction
• Strong grasp of DC-DC topologies, with ability to select optimal architectures and components
• Understanding of design for fault tolerance and reliability
• Familiar with failure mode effects and criticality analysis
• Familiarity with design of wire wound and planar inductors and transformers
• Familiarity with power supply testing and packaging for harsh environments
• Experience with in-lab impedance measurement and loop-gain measurement
• Familiarity with spacecraft electrical power systems and knowledge of radiation effects
• Familiarity with solar arrays as input power sources
• Familiarity with lithium-ion battery handling, safety, and usage

 ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday 

ELECTRIC PROPULSION ENGINEER, MECHANICAL - (STARLINK)

As a mechanical engineer within the Starlink electric propulsion team you will own the end-to-end design, analysis, test, build and on-orbit life cycle of the propulsion hardware. You will get to oversee a critical system at the heart of the satellite, as you work cross functionally with plasma physics experts, avionics engineers, and electrical engineers to develop propulsion hardware (thrusters, cathodes, regulators and the fluid feed system).  

RESPONSIBILITIES 

• Solve complex mechanical, thermal, magnetic, and fluid system problems on the space grade hardware that enables our satellites to move in space
• Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation
• Work closely with partner domains including thermal, materials, electrical, mechanical, software and GNC groups
• Develop design criteria, collaborate on requirements, and drive system-level optimization. Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction
• Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line.
• Perform vacuum chamber tests, performance characterization, and environmental tests on hardware to validate analysis and demonstrate compliance to design criteria
• Own product delivery timeline through conception, design, analysis, assembly, launch, and on-orbit performance
• Perform root cause investigations to understand failures and disposition hardware non-conformances
• Demonstrate extreme ownership of product outcomes at every stage of development and production

BASIC QUALIFICATIONS: 

• Bachelor's degree in an engineering discipline
• Experience with CAD and FEA software packages
• 1+ years of industry experience (internships/co-ops can apply)

PREFERRED QUALIFICATIONS:  

• Master’s degree in engineering or a related technical discipline
• 3+ years of professional experience in mechanical design and analysis
• Hands-on experience designing, building and testing electric or chemical propulsion systems in an industry or lab environment
• Previous experience and ownership of the full product life cycle in a high-rate production environment. (design trade, CAD design, prototyping, manufacturing, testing, qualification, production, reuse)
• Experience with fluid dynamics, finite element, or related computer-based modeling
•  Experience with pressurized components (valves, regulators, tubes, pipes, etc.)
• Experience with structural and electromagnetic finite element analysis 
• 1+ years of experience with GD&T concepts
• Experience Python and MATLAB; familiarity with SQL and Metabase
• Experience leading operation-critical part mechanical design, including structures and fluids calculations and design considerations
• Experience with manufacturing processes such as CNC mill/lathe, welding, castings, additive, etc. and proficient with the fundamentals of Design for Manufacturing/Assembly (DFMA)

ADDITIONAL REQUIREMENTS:  

• Ability to work long hours and weekends as necessary to support mission critical milestones 

COMPENSATION AND BENEFITS:               

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.  

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

MANUFACTURING AUTOMATION ENGINEER, SOLAR - (STARLINK) 

RESPONSIBILITIES:

• Design, build, qualify and implement projects spanning machine design, robotics and manufacturing processes from initial ideation to production use. 
• Architect, write, and debug PLC code.
• Implement vision systems for robotic guidance, quality control and data collection.
• Design systems to control processes, track factory performance and collaborate across teams to increase manufacturing efficiency in a data driven way.
• Design user interfaces that make complex machines easy to use and troubleshoot.
• Create electrical, pneumatic and fluid schematics for control panels.
• Keep our factories safe by implementing ANSI/RIA15.06/OSHA compliant systems.

BASIC QUALIFICATIONS:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Science/Engineering or another STEM field.
• 1+ years’ experience in the design and commissioning of automation and controls systems for manufacturing (internships/co-ops can apply).

PREFERRED QUALIFICATIONS:

Hands on experience with at least one of the specific disciplines below and interest in learning the other areas you are not yet strong in:

Industrial Automation:

• Automation Hardware: PLC’s, COTS Robots, servo motion, machine vision, distributed IO, pneumatic controls, etc.
• Field Bus Networking protocols: EtherCAT, Profinet, Ethernet/IP, Modbus TCP/RTU, etc.
• Machinery and processes: dispenser, pick and place, fastener installation, automated bonding, thermo-compression, soldering, ultrasonic welding, temperature & position control, injection molders, die casters, etc. and design for manufacturing.
• Applied Statistical Process Control and other data tools (descriptive, inferential, regression, correlation) to improve manufacturing processes.
• Safely testing and commissioning integrated systems

Software: 

• PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc.
• Robotics programming, preferably ABB Rapid.
• HMI, SCADA, IoT (MQTT, OPC-UA), SQL, C#, .NET, Python.
• Industrial machine vision, Cognex Vision Pro preferred, Halcon & OpenCV acceptable.

Electrical: 

• Electrical sizing of motors, cables, circuit protection, VFD’s, motor starters, various other motion systems.
• Design of fail-safe electrical circuits using both safety logic controllers and safety-rated relays. 
• Hands-on experience troubleshooting industrial electrical systems using tools like multimeters, oscilloscopes, EMI probes.
• Proficiency in understanding and creating electrical schematics and single line diagrams (EPLAN preferred).
• Analog signal integrity and EMI reduction.
• Hands-on experience designing and commissioning high quality electrical panels and electro-mechanical systems with appropriate safety considerations in mind.
• Knowledge of NEC, NFPA, UL508A codes with ability to ensure compliance with control system safety standards.
• Proven ability to solve complex problems with simple solutions and little supervision.
• Excited by a fast-paced environment, strong desire and ability to learn quickly and adapt.
• Excellent communication skills both written and verbal.

ADDITIONAL REQUIREMENTS:

Must be willing to work extended hours and/or weekends as needed to meet mission critical deadlines.

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

DSP ENGINEER, SATELLITES (STARLINK)

The Starlink Space Lasers team develops, produces, and deploys the most cutting-edge satellite free-space optical communication systems in the world. We are looking for engineers to contribute to the development of laser communications terminals and imaging products for the groundbreaking constellation of Starlink satellites. All SpaceX optical systems (laser communication terminal and other optical products) require a blend of theoretical expertise, practical implementation skills, and a passion for solving complex problems in real-time, resource-constrained systems.

As a DSP engineer on the Starlink Space Laser team, you will work with a team of Optical engineers, DSP engineers, software engineers, hardware engineers and end users to shape the future of laser communication systems and directly contribute to mission-critical applications in low earth orbit and beyond. You will work in a highly collaborative and fast-paced environment. 

RESPONSIBILITIES: 

• Drive program-level decisions on firmware and software designs
• Research novel solutions for large-scale, long-distance free space and fiber optic communication systems
• Design and test algorithms for on-orbit and ground-based data processing
• Work in close collaboration with FPGA, RF/antenna, and software engineers to design and validate communication systems
• Perform on-orbit demonstrations and testing
• System-level and link-level design in support of spacecraft communications and sensing systems
• Develop floating-point and fixed-point models and run simulations to analyze and validate overall system performance, including modem performance
• Own the end-to-end results of your products, from requirements gathering through production and flight, including verification and documentation

BASIC QUALIFICATIONS:

• Bachelor’s degree in computer science, computer engineering or electrical engineering and 1+ years of experience in digital signal processing engineering; or 3+ years of professional digital signal processing engineering experience in lieu of a degree
• 1+ years of experience designing and verifying modems and sensors
• 1+ years of experience developing signal processing algorithms in Python, Matlab, or C/C++
• 1+ years of experience in system-level modeling and/or digital signal processing

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering with emphasis in communication systems or digital signal processing
• Expertise modeling with both floating-point and fixed-point signal processing algorithms in Python, Matlab, or C/C++
• Experience in coherent digital demodulation of waveforms such as GMSK, BPSK, QPSK, QAM, PCM/FM, APSK, OFDM, including spread spectrum
• Experience developing firmware for Xilinx FPGA platforms using the Xilinx toolchain, or STM32
• Experience with verification between simulation and RTL FPGA implementation
• Experience modeling RF and Optical and channel impairments such as multipath, phase noise, group delay, fading and nonlinear distortion
• Understanding of RF and Optical concepts such as AGC, noise figure, power amplifiers, phase noise, PLL, oscillators/mixers
• Understanding of RF and Optical link budgets and noise analysis, intermodulation analysis, and trade-offs of frequency conversion topologies
• Familiarity with test equipment such as spectrum analyzers and signal generators
• Excellent communication and documentation skills, and ability to collaborate with other engineering disciplines

ADDITIONAL REQUIREMENTS:

• Extended hours and weekend work may be required to support critical project and mission milestones 

COMPENSATION AND BENEFITS:    
    
Pay range:    
Software Engineer/Level I: $125,000.00 - $145,000.00/per year    
Software Engineer/Level II: $145,000.00 - $175,000.00/per year    
    
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k)-retirement plan, short & long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation & will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

NEW GRADUATE ENGINEER, MECHANICAL (STARLINK)

Starlink is the world’s largest satellite constellation, providing broadband-quality internet anywhere on earth. We’re leveraging our SpaceX knowledge in building rockets and spacecraft to deploy thousands of satellites each year; today’s constellation serves over 9 million customers in more than 120 countries. We design, build, test, and operate all parts of the system – the satellite hardware, the user antennas that connect within minutes of unboxing, and the software that brings it all together. The Starlink constellation will continue to grow with increasingly powerful hardware, higher bandwidth, and a wider consumer base. We’re looking for world-class engineers to help this mission.

As a mechanical design engineer within the satellite vehicle engineering organization you will get to solve complex structural, thermal, and electromechanical problems on the various space grade hardware that make our satellites come to life. Our engineers get to own the full design lifecycle all the way from ideation, design, and test, through to manufacturing and largescale production. You will regularly partner with a wide variety of different cross functional engineering disciplines, and together you will democratize internet access all over the world. There are several sub-teams within the larger vehicle engineering group, each with a different focus area. Applicants will be considered broadly for all teams and then matched to a specific one after factoring in best technical fit, team need, and candidate preference.

Your placement on these teams will be determined throughout the interviewing process after factoring in technical fit, expertise, and your personal preference. Sub-teams include, but are not limited to:

• Mechanisms Team: end to end electromechanical design for the actuators, reaction wheels, torque rods, solar arrays, etc.
• Space Lasers Team: work in partnership with the optical team design opto-mechanical assemblies for our industry leading Space Lasers and other optical payloads.
• Bus Avionics Team: partner with the Bus electrical engineers, design for anything from mechanical avionics modules, thermal, structural, new component selection, harnessing, integration to satellites, etc.
• Structural Team: design and analysis of the satellite primary structure, e.g. chassis, ribs, rails, and propulsion tank.
• Solar Arrays Team: work on the most prolific space solar design/factory in the world. Design work ranges from flight array to test and production machine design; as well as thermal/electrical/material interfaces with other groups.  
• Battery Packs Team: mechanical design, thermal, and electrical analysis on the in-house battery packs with thousands of individual battery cells, emphasizing mass-efficient and runaway-resistant architectures.

RESPONSIBILITIES:

• Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation. 
• Develop design criteria, collaborate on requirements, and drive system-level optimization. 
• Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction. 
• Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics.
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line.
• Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria.
• Own product delivery timeline through conception, design, assembly, and launch.
• Demonstrate extreme ownership of product outcomes at every stage of development and production.

BASIC QUALIFICATIONS:

• Bachelor's degree in mechanical engineering, aerospace engineering, or another engineering/STEM discipline. 
• Experience with CAD and FEA software packages. 
• 1+ years of professional experience with mechanical/electromechanical design, analysis, testing, and/or manufacturing (internships/co-ops and club projects can apply).
• Graduating in the spring of 2026 or summer of 2026.

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in engineering or a related technical discipline.
• Hands-on project/mechanical design experience with complex mechanical systems, preferably as a team lead of a university competitive engineering club.
• Proficient in 3D CAD (NX preferred).
• Solid understanding and application of GD&T.
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems.
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp.
• Self-motivated with strong organizational, written, and oral communication skills.

Some preferred skills and experience depend on the specific team within Starlink mechanical engineering, and may include: 

• Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components. 
• Proficiency in one or more programming languages.
• Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design.
• Experience with design of experiments, statistical process control, and process qualification.
• Specific expertise applicable to any of the above sub-teams. 

ADDITIONAL REQUIREMENTS:

• Must be willing to work extended hours and weekends as needed.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k)-retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year. Company shuttles are offered to employees for round trip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday. 

LOADS AND DYNAMICS ENGINEER, SATELLITES (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 10M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

Dynamics is responsible for low and high-frequency loads, vibration, and forcing functions for Starlink satellites during ground transportation, ascent (launch), and on-orbit operation. Responsibilities also include database design and software programming for tool development. This role will also be responsible for test planning, setup, execution, and data processing. Dynamics engineers are expected to have a strong intuition of the frequency domain in addition to having solid software and analytical skills.

RESPONSIBILITIES:

• Resolve dynamics problems through analysis and test
• Execute dynamic testing from start to finish including pre-test analysis, sensor selection & installation, testing, data analysis, signal processing and model correlation
• Build finite element models
• Perform analyses using commercial and in-house codes as well as write new code
• Perform other analyses that improve products including, but not limited to, satellite brightness, stress analyses, and fatigue analysis

BASIC QUALIFICATIONS:

• Bachelor's degree in physics, mathematics, or an engineering discipline

PREFERRED SKILLS AND EXPERIENCE:

• 1+ years of professional experience with dynamics
• Hands-on experience either analyzing data or building hardware
• Experience with vibration and shock testing
• Experience with NASTRAN
• Finite element modeling experience (use of FEMAP)
• Working knowledge of structural analysis and test, including a fundamental understanding of strength, stability and fatigue failure mechanisms
• Excellent oral and written communication skills

ADDITIONAL REQUIREMENTS:

• Ability to work long hours and weekends as necessary to support critical milestones 

COMPENSATION AND BENEFITS:    
    
Pay Range:    
Loads and Dynamics Engineer/Level I: $100,000.00 - $115,000.00/per year    
Loads and Dynamics Engineer/Level II: $110,000.00 - $135,000.00/per year    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday 

MECHANICAL ENGINEER - SATELLITE SOLAR ARRAY (STARLINK)

SpaceX is looking for a highly motivated engineer to join the Solar Product Team. In this position, you will design and implement the next generation of photovoltaic power systems for new Starlink satellite versions. This role is ultimately responsible for the design, qualification, production rate capability, and reliability of Starlink power generation assemblies used across multiple satellite payloads and vehicle architectures.

RESPONSIBILITIES:

• Design and analysis of solar array components ranging from photovoltaic cells to integrated electro-mechanical solar array assemblies.
• Own and design various satellite mechanical systems and/or associated tooling specifically for the solar array sub-assembly.
• Prepare detailed content for technical design reviews. Demonstrate extreme ownership of the production outcome of the Starlink solar factory across yield, uptime, and cost.
• Work across disciplines with partner teams such as GNC, Avionics, Operations, and Payloads to achieve the best vehicle outcomes.
• Provide analytical rationale for design capability through hand calcs, and FEA where applicable.
• Complete engineering drawings, schematics, and specifications to define purchasing, manufacturing, and operational requirements.
• Write, design and execute test procedures and verification plans in both electrical and mechanical design spaces in conjunction with your team’s test specialists.
• Design and conduct process qualifications using design of experiments and statistical process control
• Work seamlessly with supply chain and production partners to complete design for manufacturing (DFM) changes necessary to meet factory rates and costs.
• Complete review of on orbit performance data and respond with manufacturing and design solutions.
• Work closely with the Materials Engineering team to develop novel solutions to space-based solar problems.

BASIC QUALIFICATIONS: 

• Bachelor's degree in an engineering discipline 
• 1+ years of professional experience (internships/co-ops experience accepted) with mechanical/electromechanical design, analysis, testing, and/or manufacturing

PREFERRED SKILLS AND EXPERIENCE: 

• Experience with solar array design and/or solar manufacturing industry
• Experience with performance characterization of photovoltaic solar cells
• Experience in specifying and qualifying materials and components for space flight
• Experience with design of experiments, statistical process control and process qualification
• Proficient in analyzing mechanical assemblies using hand calculations and FEA
• Proficient in 3D CAD (NX preferred)
• Proficient in dynamic and thermal analysis
• Proficient in GD&T
• Familiar with a wide variety of manufacturing processes and automation for composites, soft goods, adhesives and metals: welding, brazing, fastening, riveting, bonding, lamination, soldering etc.

 ADDITIONAL REQUIREMENTS: 

• This is a hands-on position that requires one to be on their feet for up to 4+ hours a day. Will sometimes be working directly with the hardware on the floor and will have to be comfortable stooping, bending, and standing
• Must be willing to work extended hours and weekends as necessary
• Preferential ability to travel internationally if needed

COMPENSATION AND BENEFITS:              

Pay range:     
Mechanical Engineer/Level I: $100,000.00 - $115,000.00/per year     
Mechanical Engineer/Level II: $110,000.00 - $135,000.00/per year     

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. 

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

THERMAL ENGINEER, SATELLITES (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

As a thermal engineer, you are responsible for the thermal design, test, and validation of Starlink satellite hardware and custom developed chips. You will make engineering decisions to improve the vehicle and increase the performance of the Starlink network.

RESPONSIBILITIES:

• Thermal design of satellite components, from initial high-level analysis down to validation of performance with ground tests and orbital data
• Thermal design of semiconductor packages, from high level concepts to detail thermal simulations and lab testing
• Devise, build and run tests to validate the performance of the hardware in extreme conditions
• Automate workflow to reduce engineering investment in the design cycle
• Pursue performance/robustness improvements
• Pursue operational simplicity and seek to reduce burden on other groups at SpaceX
• Produce quality documentation of your work to reduce miss-rate and improve efficiency
• Review peer work

BASIC QUALIFICATIONS:

• Bachelor's degree in an engineering discipline
• 1y+ industry experience (internships/co-ops can apply)

PREFERRED SKILLS AND EXPERIENCE:

• Experience with tools for chip thermal design like Flotherm or Icepak
• 1+ years of experience using scientific programming languages (including internships)
• Experience with Thermal Desktop and ANSYS Workbench
• Experience with 3D and reduced order thermal modeling
• Ability to identify sizing cases and quickly evaluate the impact of design decisions
• Working knowledge of scripting languages
• Excellent oral and written communication skills
• Ability to deliver against an aggressive schedule

ADDITIONAL REQUIREMENTS:

• Must be available to work extended hours and weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:              

Pay range:     
Thermal Engineer/Level I: $100,000.00 - $115,000.00/per year     
Thermal Engineer/Level II: $110,000.00 - $135,000.00/per year    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday 

MECHANICAL ENGINEER, SATELLITES (STARLINK)

Starlink is the world’s largest satellite constellation, providing broadband-quality internet anywhere on earth. We’re leveraging our SpaceX knowledge in building rockets and spacecraft to deploy thousands of satellites each year; today’s constellation serves over five million customers in more than 120 countries. We design, build, test, and operate all parts of the system – the satellite hardware, the user antennas that connect within minutes of unboxing, and the software that brings it all together. The Starlink constellation will continue to grow with increasingly powerful hardware, higher bandwidth, and a wider consumer base. We’re looking for world-class engineers to help this mission.

As a mechanical design engineer within the satellite vehicle engineering organization you will get to solve complex structural, thermal, and electromechanical problems on the various space grade hardware that make our satellites come to life. Our engineers get to own the full design lifecycle all the way from ideation, design, and test, through to manufacturing and largescale production. You will regularly partner with a wide variety of different cross functional engineering disciplines, and together you will democratize internet access all over the world. There are several sub-teams within the larger vehicle engineering group, each with a different focus area. Applicants will be considered broadly for all teams and then matched to a specific one after factoring in best technical fit, team need, and candidate preference

• Mechanisms Team: end to end electromechanical design for the actuators, reaction wheels, torque rods, solar arrays, etc.
• Space Lasers Team: work in partnership with the optical team design opto-mechanical assemblies for our industry leading Space Lasers and other optical payloads.
• Bus Avionics Team: partner with the Bus electrical engineers, design for anything from mechanical avionics modules, thermal, structural, new component selection, harnessing, integration to satellites, etc.
• Structural Team: design and analysis of the satellite primary structure, e.g. chassis, ribs, rails, and propulsion tank
• Solar Arrays Team: work on the most prolific space solar design/factory in the world. Design work ranges from flight array to test and production machine design; as well as thermal/electrical/material interfaces with other groups  
• Battery Packs Team: mechanical design, thermal, and electrical analysis on the in-house battery packs with thousands of individual battery cells, emphasizing mass-efficient and runaway-resistant architectures.

Your placement on these teams will be determined throughout the interviewing process after factoring in technical fit, expertise, team need, and your personal preference

RESPONSIBILITIES: 

• Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation 
• Develop design criteria, collaborate on requirements, and drive system-level optimization 
• Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction 
• Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line
• Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria
• Own product delivery timeline through conception, design, assembly, and launch
• Demonstrate extreme ownership of product outcomes at every stage of development and production 

BASIC QUALIFICATIONS: 

• Bachelor's degree in an engineering discipline 
• Experience with CAD and FEA software packages 
• 1+ years of professional experience (including internships) with mechanical/electromechanical design, analysis, testing, and/or manufacturing

PREFERRED SKILLS AND EXPERIENCE: 

• Master’s degree in engineering or a related technical discipline
• 3+ years of professional experience in mechanical design and analysis
• 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead
• Proficient in 3D CAD (NX preferred)
• Solid understanding and application of GD&T
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp
• Self-motivated with strong organizational, written, and oral communication skills 

Some preferred skills and experience depend on the specific team within Starlink mechanical engineering, and may include: 

• Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components 
• Proficiency in one or more programming languages
• Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design
• Experience with design of experiments, statistical process control, and process qualification
• Specific expertise applicable to any of the above sub-teams 

ADDITIONAL REQUIREMENTS: 

Ability to work long hours and weekends as necessary to support mission critical milestones 

COMPENSATION AND BENEFITS:              

Pay range:     
Mechanical Engineer/Level I: $100,000.00 - $115,000.00/per year     
Mechanical Engineer/Level II: $110,000.00 - $135,000.00/per year     

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. 

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

HARNESSING DESIGN ENGINEER, SATELLITES (STARLINK)

RESPONSIBILITIES:

• Develop the electro-mechanical design of wire harnesses within our family of Starlink vehicles
• Develop harness design solutions within a 3D NX CAD environment, and manage technical trade studies to meet stakeholder objectives as well as adhere to internal design standards and requirements
• Generate electrical schematics to support both flight and qualification designs
• Own vehicle-level harnessing mechanical assemblies and drive to closure all systems integration trades related to those assemblies
• Perform analysis and physical testing (both mechanical and electrical) of harnessing with respect to thermal, loads, vibration and shock to ensure full qualification for flight
• Document and communicate the design, analysis and testing results thoroughly and clearly via design reviews
• Create and release on schedule, appropriate harnessing manufacturing documentation and drawings
• Interface with harness production and integration teams to ensure final harness designs can be produced and installed on schedule in accordance with overall project goals
• Perform R&D investigations and trade studies to push wire harness design to new boundaries in terms of mass and cost savings

BASIC QUALIFICATIONS:

• Bachelor's degree in an engineering discipline
• Experience with CAD and FEA software packages

PREFERRED SKILLS AND EXPERIENCE:

• Proficiency with Siemens NX and Teamcenter
• Experience with wire harness 3D design, wire harness installation drawings and formboard creation, wiring diagrams, 3D modeling of complex top-level assemblies, 3D modeling and analysis of avionics enclosures and secondary structure
• 1+ years of hands-on project experience with complex mechanical systems, preferably as a team lead (including internships) 
• Strong teamwork skills with a proven ability to effectively interact and collaborate with other engineering disciplines and excellent attention to detail
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp
• Self-motivated with strong organizational, written, and oral communication skills 

ADDITIONAL REQUIREMENTS:

COMPENSATION AND BENEFITS:             

Pay range:    
Avionics Design Engineer/Level I: $100,000.00 - $115,000.00/per year    
Avionics Design Engineer/Level II: $110,000.00 - $135,000.00/per year    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

MECHANICAL ENGINEER, SATELLITE BUS (STARLINK)

Starlink is the world’s largest satellite constellation, providing broadband-quality internet anywhere on earth. We’re leveraging our SpaceX knowledge in building rockets and spacecraft to deploy thousands of satellites each year; today’s constellation serves over five million customers in more than 120 countries. We design, build, test, and operate all parts of the system – the satellite hardware, the user antennas that connect within minutes of unboxing, and the software that brings it all together. The Starlink constellation will continue to grow with increasingly powerful hardware, higher bandwidth, and a wider consumer base. We’re looking for world-class engineers to help this mission.

As a mechanical design engineer within the satellite vehicle engineering organization you will get to solve complex structural, thermal, and electromechanical problems on the various space grade hardware that make our satellites come to life. Our engineers get to own the full design lifecycle all the way from ideation, design, and test, through to manufacturing and largescale production. You will regularly partner with a wide variety of different cross functional engineering disciplines, and together you will democratize internet access all over the world. There are several sub-teams within the larger vehicle engineering group, each with a different focus area. Applicants will be considered broadly for all teams and then matched to a specific one after factoring in best technical fit, team need, and candidate preference

• Mechanisms Team: end to end electromechanical design for the actuators, reaction wheels, torque rods, solar arrays, etc.
• Space Lasers Team: work in partnership with the optical team design opto-mechanical assemblies for our industry leading Space Lasers and other optical payloads.
• Bus Avionics Team: partner with the Bus electrical engineers, design for anything from mechanical avionics modules, thermal, structural, new component selection, harnessing, integration to satellites, etc.
• Structural Team: design and analysis of the satellite primary structure, e.g. chassis, ribs, rails, and propulsion tank
• Solar Arrays Team: work on the most prolific space solar design/factory in the world. Design work ranges from flight array to test and production machine design; as well as thermal/electrical/material interfaces with other groups  
• Battery Packs Team: mechanical design, thermal, and electrical analysis on the in-house battery packs with thousands of individual battery cells, emphasizing mass-efficient and runaway-resistant architectures.

Your placement on these teams will be determined throughout the interviewing process after factoring in technical fit, expertise, team need, and your personal preference

RESPONSIBILITIES: 

• Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation 
• Develop design criteria, collaborate on requirements, and drive system-level optimization 
• Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction 
• Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line
• Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria
• Own product delivery timeline through conception, design, assembly, and launch
• Demonstrate extreme ownership of product outcomes at every stage of development and production 

BASIC QUALIFICATIONS: 

• Bachelor's degree in an engineering discipline 
• Experience with CAD and FEA software packages 
• 1+ years of professional experience (including internships) with mechanical/electromechanical design, analysis, testing, and/or manufacturing

PREFERRED SKILLS AND EXPERIENCE: 

• Master’s degree in engineering or a related technical discipline
• 3+ years of professional experience in mechanical design and analysis
• 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead
• Proficient in 3D CAD (NX preferred)
• Solid understanding and application of GD&T
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp
• Self-motivated with strong organizational, written, and oral communication skills 

Some preferred skills and experience depend on the specific team within Starlink mechanical engineering, and may include: 

• Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components 
• Proficiency in one or more programming languages
• Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design
• Experience with design of experiments, statistical process control, and process qualification
• Specific expertise applicable to any of the above sub-teams 

ADDITIONAL REQUIREMENTS: 

Ability to work long hours and weekends as necessary to support mission critical milestones 

COMPENSATION AND BENEFITS:              

Pay range:     
Mechanical Engineer/Level I: $100,000.00 - $115,000.00/per year     
Mechanical Engineer/Level II: $110,000.00 - $135,000.00/per year     

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. 

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

SR. MECHANICAL ENGINEER, SATELLITES (STARLINK)

Starlink is the world’s largest satellite constellation, providing broadband-quality internet anywhere on earth. We’re leveraging our SpaceX knowledge in building rockets and spacecraft to deploy thousands of satellites each year; today’s constellation serves over five million customers in more than 120 countries. We design, build, test, and operate all parts of the system – the satellite hardware, the user antennas that connect within minutes of unboxing, and the software that brings it all together. The Starlink constellation will continue to grow with increasingly powerful hardware, higher bandwidth, and a wider consumer base. We’re looking for world-class engineers to help this mission.

As a mechanical design engineer within the satellite vehicle engineering organization you will get to solve complex structural, thermal, and electromechanical problems on the various space grade hardware that make our satellites come to life. Our engineers get to own the full design lifecycle all the way from ideation, design, and test, through to manufacturing and largescale production. You will regularly partner with a wide variety of different cross functional engineering disciplines, and together you will democratize internet access all over the world. There are several sub-teams within the larger vehicle engineering group, each with a different focus area. Applicants will be considered broadly for all teams and then matched to a specific one after factoring in best technical fit, team need, and candidate preference

• Mechanisms Team: end to end electromechanical design for the actuators, reaction wheels, torque rods, solar arrays, etc.
• Space Lasers Team: work in partnership with the optical team design opto-mechanical assemblies for our industry leading Space Lasers and other optical payloads.
• Bus Avionics Team: partner with the Bus electrical engineers, design for anything from mechanical avionics modules, thermal, structural, new component selection, harnessing, integration to satellites, etc.
• Structural Team: design and analysis of the satellite primary structure, e.g. chassis, ribs, rails, and propulsion tank
• Solar Arrays Team: work on the most prolific space solar design/factory in the world. Design work ranges from flight array to test and production machine design; as well as thermal/electrical/material interfaces with other groups  
• Battery Packs Team: mechanical design, thermal, and electrical analysis on the in-house battery packs with thousands of individual battery cells, emphasizing mass-efficient and runaway-resistant architectures.

Your placement on these teams will be determined throughout the interviewing process after factoring in technical fit, expertise, team need, and your personal preference

RESPONSIBILITIES: 

• Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation 
• Develop design criteria, collaborate on requirements, and drive system-level optimization 
• Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction 
• Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics
• Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line
• Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria
• Own product delivery timeline through conception, design, assembly, and launch
• Demonstrate extreme ownership of product outcomes at every stage of development and production 

BASIC QUALIFICATIONS: 

• Bachelor's degree in an engineering discipline 
• Experience with CAD and FEA software packages 
• 5+ years of professional experience with mechanical/electromechanical design, analysis, testing, and/or manufacturing

PREFERRED SKILLS AND EXPERIENCE: 

• Master’s degree in engineering or a related technical discipline
• 3+ years of professional experience in mechanical design and analysis
• 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead
• Proficient in 3D CAD (NX preferred)
• Solid understanding and application of GD&T
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp
• Self-motivated with strong organizational, written, and oral communication skills 

Some preferred skills and experience depend on the specific team within Starlink mechanical engineering, and may include: 

• Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components 
• Proficiency in one or more programming languages
• Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design
• Experience with design of experiments, statistical process control, and process qualification
• Specific expertise applicable to any of the above sub-teams 

ADDITIONAL REQUIREMENTS: 

Ability to work long hours and weekends as necessary to support mission critical milestones 

COMPENSATION AND BENEFITS:              

Pay range:     
Mechanical Engineer/Senior: $130,000.00 - $180,000.00/per year     

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

MECHANICAL ENGINEER, SATELLITE HARNESSING (STARLINK)

RESPONSIBILITIES:

• Develop the electro-mechanical design of wire harnesses within our family of Starlink vehicles
• Develop harness design solutions within a 3D NX CAD environment, and manage technical trade studies to meet stakeholder objectives as well as adhere to internal design standards and requirements
• Generate electrical schematics to support both flight and qualification designs
• Own vehicle-level harnessing mechanical assemblies and drive to closure all systems integration trades related to those assemblies
• Perform analysis and physical testing (both mechanical and electrical) of harnessing with respect to thermal, loads, vibration and shock to ensure full qualification for flight
• Document and communicate the design, analysis and testing results thoroughly and clearly via design reviews
• Create and release on schedule, appropriate harnessing manufacturing documentation and drawings
• Interface with harness production and integration teams to ensure final harness designs can be produced and installed on schedule in accordance with overall project goals
• Perform R&D investigations and trade studies to push wire harness design to new boundaries in terms of mass and cost savings

BASIC QUALIFICATIONS:

• Bachelor's degree in an engineering discipline
• Experience with CAD and FEA software packages

PREFERRED SKILLS AND EXPERIENCE:

• Proficiency with Siemens NX and Teamcenter
• Experience with wire harness 3D design, wire harness installation drawings and formboard creation, wiring diagrams, 3D modeling of complex top-level assemblies, 3D modeling and analysis of avionics enclosures and secondary structure
• 1+ years of hands-on project experience with complex mechanical systems, preferably as a team lead (including internships) 
• Strong teamwork skills with a proven ability to effectively interact and collaborate with other engineering disciplines and excellent attention to detail
• Demonstrated understanding of structural analysis and failure modes of complex mechanical systems
• Prior ownership of a complex component or assembly from initial design through high-volume production ramp
• Self-motivated with strong organizational, written, and oral communication skills 

ADDITIONAL REQUIREMENTS:

COMPENSATION AND BENEFITS:             

Pay range:    
Avionics Design Engineer/Level I: $100,000.00 - $115,000.00/per year    
Avionics Design Engineer/Level II: $110,000.00 - $135,000.00/per year    

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday

HARDWARE DEVELOPMENT ENGINEER - POWER ELECTRONICS (STARLINK)

SpaceX is leveraging its experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to 9M+ users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact. As we continue to upgrade and expand the constellation, we’re looking for best-in-class engineers to join the team.

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

RESPONSIBILITIES:

• Provide engineering expertise in design, analysis, and testing of DC-DC power converters for harsh environments
• Work on electrical power system and sub-system level design trades and develop requirements
• Define and perform electrical power system verification testing and analysis
• Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware

BASIC QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline 
• 1+ years of professional experience in power converter development 

PREFERRED SKILLS AND EXPERIENCE:

• Master’s degree in electrical engineering or related field
• Strong grasp of analog control and discrete logic design
• Experience in modeling, simulation, and testing of power electronics
• Working experience in voltage and current mode control and compensation design
• Experience with AC-DC converters and power factor correction
• Strong grasp of DC-DC topologies, with ability to select optimal architectures and components
• Understanding of design for fault tolerance and reliability
• Familiar with failure mode effects and criticality analysis
• Familiarity with design of wire wound and planar inductors and transformers
• Familiarity with power supply testing and packaging for harsh environments
• Experience with in-lab impedance measurement and loop-gain measurement
• Familiarity with spacecraft electrical power systems and knowledge of radiation effects
• Familiarity with solar arrays as input power sources
• Familiarity with lithium-ion battery handling, safety, and usage

 ADDITIONAL REQUIREMENTS:

• Ability to work extended hours or weekends as needed for mission critical deadlines

COMPENSATION AND BENEFITS:

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday