WASTEWATER TECHNICIAN (STARLINK PCB)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven technicians to drive manufacturing output and yield. You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products. You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.

As a Wastewater Technician on Starlink PCB, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction, and a drive to correct those issues in advance of undesirable events. This position is responsible for the development, implementation, and operationalization of equipment, facilities, treatment and manufacturing process technologies necessary for high volume production. By the end of 2025, this will be the largest PCB manufacturing facility, by volume, in North America.

RESPONSIBILITIES:

• Execute startup and shutdown procedures for production equipment
• Identify equipment and process deviations and perform corrective actions
• Perform necessary interventions to maintain process parameters (this may include chemical analysis, additions, recipe changes, and machine adjustments)
• Troubleshoot, maintain, and calibrate a variety of process equipment including plating, etching stripping, developing, surface treatment, and cleaning equipment
• Work with engineers and technicians to create operating procedures
• Use knowledge of systems and existing documentation like schematics and parts lists to create and maintain a mature and efficient hardware inventory system – including procurement of critical spares
• Identify continuous improvement opportunities for yield, performance, and cost
• Track schedule for and perform preventive maintenance and calibration of equipment and instruments
• Perform dispositions and rework for nonconforming PCBs
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Perform training of production personnel
• Maintain inventory of consumables
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Recommend improvements to manufacturing processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Read, interpret, and follow technical documents such as manufacturing work instructions
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate
• 2+ years of experience working in a hands-on technical position OR an associate’s degree in a STEM field

PREFERRED SKILLS AND EXPERIENCE:

• Proficiently use a computer and MS Outlook, Word, Excel, and PowerPoint
• 2+ years of experience with printed circuit boards (PCBs), engineering laminates, electrochemical processes, and/or microelectronics fabrication (including school projects, clubs, or internships) 
• Experience working in a manufacturing environment or wet lab
• Experience with process parameters and engineering units for temperature, pressure, flow, and power
• Ability to read and understand P&ID and schematic wiring diagrams
• Experience with mechanical equipment and systems requiring the isolation of the malfunction, disassembly of industrial machinery and repair/replacement of bearings, gears, structural components
• Experience with lock out tag out, job hazard analysis, hot work permitting
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Experience using production and inventory management software such as MES/ERP
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight
• Current or past certification for IPC-A-600, IPC-6012 or equivalent

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed
• Due to the nature of production line bring-up, the work schedule will evolve
  • Will start as 5 AM - 5 PM (Monday - Thursday) 
  • Final permanent schedules:
    • A-Shift: 5 AM - 5 PM (Sunday-Tuesday and every other Wednesday)
    • B-Shift: 5 AM - 5 PM (Thursday - Saturday and every other Wednesday)
    • C-Shift: 5 PM - 5 AM (Sunday-Tuesday and every other Wednesday)
    • D-Shift: 5 PM - 5 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces

INSTRUMENTATION AND CONTROLS TECHNICIAN - WATER TREATMENT

The Water Treatment team at SpaceX is looking for an experienced Instrumentation and Controls (I&C) Technician to support our rapidly expanding site in Bastrop, TX. You will be the technical backbone of our critical water infrastructure, ensuring the reliability of Ultra-Pure Water (UPW), Industrial Wastewater (IWW), and Zero Liquid Discharge (ZLD) systems that support our manufacturing and testing operations.

This is not a role for someone who prefers to sit at a desk. We need a hands-on problem solver who can troubleshoot a PLC panel in the morning, calibrate sensitive chemical analyzers in the afternoon, and help redesign a control loop before the end of the day. You will take ownership of the "eyes and ears" of our water systems, ensuring uptime for critical production lines and safety for the rest of the operations team.

RESPONSIBILITIES:

• Perform installation, calibration, troubleshooting, and repair of industrial instrumentation, including pH, ORP, conductivity, turbidity, flow, level, pressure, and temperature transmitters
• Troubleshoot and maintain control panels, PLCs (Allen Bradley/Siemens), VFDs, and motor starters related to water treatment skids
• Diagnose issues within 4-20mA, 0-10V, and digital communication loops (Ethernet/IP, Modbus)
• Work closely with the water operations team to optimize chemical dosing pumps and automated valves for process efficiency
• Execute preventative maintenance (PM) plans on electrical and control systems to minimize downtime
• Assist engineers with the commissioning of new water treatment equipment and upgrades to existing infrastructure
• Read and interpret P&IDs, electrical schematics, and logic diagrams to identify root causes of system failures
• Maintain accurate records of calibration and maintenance activities
• Configure the data acquisition hardware and control screens/HMIs

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate.
• 3+ years of professional experience in industrial maintenance, instrumentation, or industrial electrical work
• Experience working with low voltage controls (24VDC) and high voltage power (up to 480VAC)

PREFERRED SKILLS AND EXPERIENCE:

• Associate degree in instrumentation technology, electrical engineering technology, or a related field
• Experience specifically within water/wastewater treatment facilities (RO, DI, UF, Clarification and Precipitation, Thermal Evaporators)
• Proficiency with Allen Bradley and Siemens PLCs (ControlLogix, CompactLogix) and Ignition SCADA software
• Strong understanding of fluid dynamics, pumps, and automated valves
• Ability to solder, terminate wires, and fabricate simple brackets/conduit runs
• Knowledge of NEC (National Electrical Code) and NFPA 70E standards
• Experience with chemical handling systems and hazardous production materials

ADDITIONAL REQUIREMENTS:

• General physical requirements: Standing for long periods, climbing ladders/stairs, lifting and carrying up to 50 lbs, and working in tight quarters
• Willingness to work overtime, weekends, and on-call shifts when needed to support critical infrastructure

SUPERVISOR, WASTEWATER TREATMENT (STARLINK PCB)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven supervisors to drive manufacturing tools and processes, from initial concept development to full scale production. You will drive the relationship between engineering, development, and production teams and will interact regularly with department leadership. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you deliver.

As a Starlink Wastewater Treatment Supervisor, you will manage a team of technicians while working closely with specialists and engineers, driving the operationalization and ramp of a 24/7 state-of-the-art wastewater treatment plant with the mission of recycling process water from various Starlink production lines. The supervisor will also drive progress on an hour-by-hour and day-by-day basis by effectively using labor resources, prioritizing work, and setting goals. For this role specifically, it is highly important that the supervisor is an inspiring leader, frequently working side-by-side with their team.

RESPONSIBILITIES:

• Lead and manage a team of technicians, including performance management related tasks
• Supervise shop floor activity, including daily schedules and workflow
• Effectively organize, assign, and track work/deliverables for the team, ensuring seamless progression through multi-shift work schedules
• Prioritize work based on production schedule and organizational goals
• Support transitioning equipment from engineering development to full rate production
• Develop standard work instructions and PM schedules
• Identify training needs and develop a training program
• Provide required data and reporting to support department metrics and improvements
• Maximize productivity, efficiency, and quality
• Maintain tooling and consumable supply inventory
• Continuously improve people, process, and equipment
• Identify and mitigate risks to production schedules and targets
• Coordinate efforts to minimize production interruptions
• Ensure process quality and conformance to specifications
• Improve area safety and efficiency through regular auditing and continuous improvement
• Use root cause analysis and implement corrective and preventive actions
• Initiate and foster a spirit of cooperation within and between departments

BASIC QUALIFICATIONS:

• Bachelor’s degree or 5+ years of professional experience in a water treatment or waste water treatment plant in lieu of degree
• 1+ years of experience leading a team or project

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience leading a team or project
• Lean manufacturing training and experience
• Demonstrated ability to read and interpret controlled documentation such as wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists
• Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis
• Able to adapt to constant changing work assignments and fast-paced work environment
• Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related software

ADDITIONAL REQUIREMENTS:

• Must be available for one of the following shifts (start and end times are approximate):
• A Shift – 5:00am-5:00pm, Sunday-Wednesday
• B Shift – 5:00am-5:00pm, Wednesday-Saturday
• C Shift – 5:00pm-5:00am, Sunday-Wednesday
• D Shift – 5:00pm-5:00am, Wednesday-Saturday
• Ability to travel on an ongoing basis (up to 10%)
• Ability to stand up to 6 hours, lift 25 pounds unassisted, and maneuver around equipment in a factory setting
• Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are required to perform the functions of this position
• Ability to work in cleanroom and industrial environments with fumes/odors, noise, hazardous chemicals, and confined spaces

PCB TECHNICIAN (STARLINK)

SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe.

As a PCB Technician, you will be working on the many processes within printed circuit board manufacturing in the Starlink factory. This is a versatile and highly skilled, hands-on manufacturing job that includes operating production equipment, performing quality inspections, performing chemical analysis and additions, and handling chemical materials to meet the goals for output and quality. The ideal candidate is comfortable working in an electro-chemical manufacturing environment and is motivated by Starlink’s mission to provide high speed, low-latency connectivity across the globe.

RESPONSIBILITIES:

• Execute startup and shutdown procedures for production equipment
• Monitor process conditions, equipment, and control systems for state-of-the-art PCB manufacturing which may include metal plating lines, copper etching lines, soldermask printers, water treatment systems, plasma etching systems, laser or mechanical drilling machines, and lamination ovens
• Perform necessary interventions to maintain process parameters, including chemical analysis, additions, recipe changes, and machine adjustments
• Perform first-level troubleshooting, provide feedback, and work with maintenance and engineering teams to drive root cause of equipment downtime
• Track schedule and perform preventive maintenance and calibration of equipment and instruments
• Perform dispositions and rework for nonconforming PCBs
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Perform training of production personnel
• Ensure lab equipment is maintained and calibrated
• Maintain inventory of consumables
• Safely handle chemicals and chemical handling equipment (including transport and loading)
• Clean chemical processing equipment, machine parts, and tools
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Recommend improvements to manufacturing processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Read, interpret, and follow technical documents, such as manufacturing work instructions
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 6+ months of experience in a hands-on technical field such as automotive, electronics, or other high-volume manufacturing industry, or an associate’s degree in a STEM field

PREFERRED SKILLS AND EXPERIENCE:

• 2+ years of experience with printed circuit boards (PCBs), engineering laminates, electrochemical processes, and/or microelectronics fabrication (including school projects, clubs, or internships) 
• Proficiently use a computer and Microsoft Office suite
• Experience working in a wet lab
• Experience handling flammable, toxic, corrosive, or other hazardous chemicals
• Experience using production and inventory management software such as MES/ERP
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight
• Current or past certification for IPC-A-600, IPC-6012 or equivalent

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime, and/or weekends as needed
• Must be available for one of the shifts below:
  • A-Shift: 5:00 AM - 5:00 PM (Sunday - Tuesday and every other Wednesday)
  • B-Shift: 5:00 AM - 5:00 PM (Thursday - Saturday and every other Wednesday)
  • C-Shift: 5:00 PM - 5:00 AM (Sunday - Tuesday and every other Wednesday)
  • D-Shift: 5:00 PM - 5:00 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to 25 lbs. unassisted
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces
• Able to travel for business up to 10%

PCB PROCESS TECHNICIAN (STARLINK)

SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe.

As a PCB Process Technician, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction. This position is responsible for the development, implementation, and operation of equipment, facilities, treatment, and manufacturing process technologies necessary for high-volume production. 

RESPONSIBILITIES:

• Execute startup and shutdown procedures for production equipment
• Identify equipment and process deviations and perform corrective actions
• Perform necessary interventions to maintain process parameters (this may include chemical analysis, additions, recipe changes, and machine adjustments)
• Troubleshoot, maintain, and calibrate a variety of process equipment including plating, etching, stripping, developing, surface treatment, and cleaning equipment
• Work with engineers and technicians to create operating procedures
• Use knowledge of systems and existing documentation like schematics and parts lists to create and maintain a mature and efficient hardware inventory system, including procurement of critical spares
• Identify continuous improvement opportunities for yield, performance, and cost
• Schedule and perform preventive maintenance and calibration of equipment and instruments
• Perform dispositions and rework for nonconforming PCBs
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Train new production staff
• Maintain inventory of consumables
• Safely handle chemicals and chemical handling equipment, including transportation, loading, and unloading
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Recommend improvements to manufacturing processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Read, interpret, and follow technical documents and manufacturing work instructions
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties as assigned for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 1+ years of experience working in a hands-on technical position

PREFERRED SKILLS AND EXPERIENCE:

• 5+ years of experience with printed circuit boards (PCBs), engineering laminates, electrochemical processes, and/or microelectronics fabrication (including school projects, clubs, or internships) 
• Experience working in a manufacturing environment or wet lab
• Experience with process parameters and engineering units for temperature, pressure, flow, and power
• Ability to read and understand P&ID and schematic wiring diagrams
• Proficiently use a computer and MS Outlook, Word, Excel, and PowerPoint
• Experience with mechanical equipment and systems requiring the isolation of the malfunction, disassembly of industrial machinery and repair/replacement of bearings, gears, structural components
• Experience with lock out tag out, job hazard analysis, hot work permitting
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Experience using production and inventory management software such as MES/ERP
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight
• Current or past certification for IPC-A-600, IPC-6012 or equivalent

• Must be open to work all shifts, overtime, and/or weekends as needed
• Must be available for one of the shifts below:
  • A-Shift: 5:00 AM - 5:00 PM (Sunday - Tuesday and every other Wednesday)
  • B-Shift: 5:00 AM - 5:00 PM (Thursday - Saturday and every other Wednesday)
  • C-Shift: 5:00 PM - 5:00 AM (Sunday - Tuesday and every other Wednesday)
  • D-Shift: 5:00 PM - 5:00 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces
• Able to travel for business up to 10%

WATER TREATMENT SPECIALIST, UPW & WASTEWATER (STARLINK)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven specialists to drive manufacturing tools and processes, from initial concept development to full-scale production. You will drive the relationship between engineering, development, and production teams and will interact regularly with department leadership. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you deliver. 

As a Water Treatment Specialist on Starlink, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction, and a drive to correct those issues in advance of undesirable events. This position is responsible for the development, implementation, and operationalization of equipment, facilities, treatment, and manufacturing process technologies necessary for high volume production. This role will focus on our two ZLD (zero liquid discharge) water treatment facilities, one supporting our PCB operations (largest printed circuit fab in North America!) and the other our Chip Packaging Plant (featuring a state of the art panel level packaging process). You will ensure reliable water quality for our partner teams, in a fast-paced, innovative manufacturing environment. 

RESPONSIBILITIES: 

• Monitor, troubleshoot, root cause, and improve UPW (ultrapure water) systems, including reverse osmosis (RO), electrode ionization (EDI), UV disinfection, and filtration 
• Monitor, troubleshoot, root cause, and improve wastewater treatment processes, including pH neutralization, evaporators (multiple-effect vacuum and MVR units), clarification/precipitation and solids dewatering, AOP (advanced oxidation processes), crystallizers, and a variety of other processes (TMF, UF, etc.)
• Perform routine preventative maintenance, calibration, and troubleshooting on pumps, valves, sensors, membranes, and control systems; help to define maintenance schedules and support activities
• Define daily water quality sampling, analysis (e.g., TOC, silica, metals, conductivity), and data logging requirements and tools needed to do them, like Hach analyzers or similar
• Respond to alarms, investigate excursions, and implement corrective actions to minimize downtime (target: >99.9% system availability)
• Collaborate with manufacturing, EHS, and engineering teams to optimize water usage, reduce waste, and implement sustainability initiatives
• Ensure adherence to OSHA, EPA, and SpaceX safety protocols, including lockout/tagout (LOTO) and chemical handling
• Identify equipment and process deviations and perform corrective actions 
• Work with engineers and technicians to create operating procedures 
• Use knowledge of systems and existing documentation like schematics and parts lists to create and maintain a mature and efficient hardware inventory system – including procurement of critical spares 
• Identify continuous improvement opportunities for uptime and quality 
• Safely handle chemicals (including transporting and loading) and chemical handling equipment 
• Ensure 5S standards are upheld by maintaining a clean and organized work area 
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment 
• Work with engineers, technicians, and fabricators to implement fluid and mechanical designs in the field 
• work with engineers and technicians to create operating procedure

BASIC QUALIFICATIONS: 

• High school diploma or equivalency certificate 
• Bachelor’s degree in an engineering, math, or science discipline; OR 3+ years of experience working with automated processes in one of the following areas: 
  • Control room operations
  • Plant operations 
  • Fluid control systems 

PREFERRED SKILLS AND EXPERIENCE: 

• Experience with process parameters and engineering units for temperature, pressure, flow, and power 
• Ability to read and understand P&ID and schematic wiring diagrams 
• Experience with mechanical equipment and systems requiring the isolation of the malfunction, disassembly of industrial machinery, and repair/replacement of bearings, gears, and structural components 
• Experience with lock out-tag out, job hazard analysis, and hot work permitting 
• Proficiently use a computer and MS Outlook, Word, Excel, and PowerPoint 
• 3+ years of hands-on experience in UPW production and/or industrial wastewater treatment (semiconductor, pharma, or electronics manufacturing ideal) 
• Experience in a chemical manufacturing or oil and gas industry 
• Strong knowledge of water chemistry, ion exchange, RO/EDI systems, and wastewater technologies 
• Proficiency with water quality instrumentation and basic PLC troubleshooting 
• Experience working in a manufacturing environment or wet lab 
• Experience handling flammable, toxic, corrosive, or hazardous chemicals 
• Experience using production and inventory management software such as MES/ERP 
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams 
• Ability to identify and maintain priorities for tasks and projects while staying organized 
• Ability to rapidly change roles and responsibilities while working independently in a high-paced, challenging work environment with minimal oversight 
• Current or past certification for IPC-A-600, IPC-6012 or equivalent 

 ADDITIONAL REQUIREMENTS: 

• Able to work all shifts, overtime, and weekends as needed 
• Shift schedules:  
  • A Shift: 5 AM – 5 PM Sunday - Tuesday and every other Wednesday 
  • B Shift: 5 AM – 5 PM Thursday - Saturday and every other Wednesday 
  • C Shift: 5 PM - 5 AM Sunday - Tuesday and every other Wednesday 
  • D Shift: 5 PM - 5 AM Thursday - Saturday and every other Wednesday 
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position 
• Able to lift up to 25lbs. unassisted 
• Able to work outside with hand tools 
• Able to stand, climb, walk, and work with objects overhead

WASTEWATER TECHNICIAN (STARLINK PCB)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven technicians to drive manufacturing output and yield. You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products. You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.

As a Wastewater Technician on Starlink PCB, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction, and a drive to correct those issues in advance of undesirable events. This position is responsible for the development, implementation, and operationalization of equipment, facilities, treatment and manufacturing process technologies necessary for high volume production. By the end of 2025, this will be the largest PCB manufacturing facility, by volume, in North America.

RESPONSIBILITIES:

• Execute startup and shutdown procedures for production equipment
• Identify equipment and process deviations and perform corrective actions
• Perform necessary interventions to maintain process parameters (this may include chemical analysis, additions, recipe changes, and machine adjustments)
• Troubleshoot, maintain, and calibrate a variety of process equipment including plating, etching stripping, developing, surface treatment, and cleaning equipment
• Work with engineers and technicians to create operating procedures
• Use knowledge of systems and existing documentation like schematics and parts lists to create and maintain a mature and efficient hardware inventory system – including procurement of critical spares
• Identify continuous improvement opportunities for yield, performance, and cost
• Track schedule for and perform preventive maintenance and calibration of equipment and instruments
• Perform dispositions and rework for nonconforming PCBs
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Perform training of production personnel
• Maintain inventory of consumables
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Recommend improvements to manufacturing processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Read, interpret, and follow technical documents such as manufacturing work instructions
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate
• 2+ years of experience working in a hands-on technical position OR an associate’s degree in a STEM field

PREFERRED SKILLS AND EXPERIENCE:

• Proficiently use a computer and MS Outlook, Word, Excel, and PowerPoint
• 2+ years of experience with printed circuit boards (PCBs), engineering laminates, electrochemical processes, and/or microelectronics fabrication (including school projects, clubs, or internships) 
• Experience working in a manufacturing environment or wet lab
• Experience with process parameters and engineering units for temperature, pressure, flow, and power
• Ability to read and understand P&ID and schematic wiring diagrams
• Experience with mechanical equipment and systems requiring the isolation of the malfunction, disassembly of industrial machinery and repair/replacement of bearings, gears, structural components
• Experience with lock out tag out, job hazard analysis, hot work permitting
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Experience using production and inventory management software such as MES/ERP
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight
• Current or past certification for IPC-A-600, IPC-6012 or equivalent

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed
• Due to the nature of production line bring-up, the work schedule will evolve
  • Will start as 5 AM - 5 PM (Monday - Thursday) 
  • Final permanent schedules:
    • A-Shift: 5 AM - 5 PM (Sunday-Tuesday and every other Wednesday)
    • B-Shift: 5 AM - 5 PM (Thursday - Saturday and every other Wednesday)
    • C-Shift: 5 PM - 5 AM (Sunday-Tuesday and every other Wednesday)
    • D-Shift: 5 PM - 5 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces

PCB MATERIALS LAB TECHNICIAN (STARLINK) 

As a PCB Materials Lab Technician, you will be working in a brand new chemical and materials lab supporting printed circuit board manufacturing in the Starlink factory. This is a versatile and highly skilled, hands on lab role that will involve PCB micro-section sample preparation and analysis, while meeting goals for output and quality. The ideal candidate is comfortable working in a lab setting within an electro-chemical manufacturing environment and is motivated by Starlink's mission to provide high speed, low latency connectivity across the globe. 

RESPONSIBILITIES:

• Execute test methods and perform analysis to support start-up and sustaining operations of new state of the art PCB production lines
• Work with engineers to develop and document test procedures
• Recommend improvements to lab processes and work with engineers to refine processes with a specific focus on reducing cost and downtime and increasing yield
• Work with engineers on characterization and failure analysis processes
• Operate lab equipment including a router, polisher, SEM, EDS, and laser profilometer.
• Schedule and perform preventive maintenance and calibration of equipment and instruments
• Perform first level troubleshooting, provide feedback, and work with maintenance and engineering teams to drive root cause of equipment downtime
• Cross train on chemical analysis equipment including automatic titrators, UV-VIS, and Atomic Absorption.
• Maintain inventory of consumables
• Coordinate with vendors as needed for troubleshooting and other equipment support
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Read, interpret, and follow technical documents
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school diploma or equivalency certificate
• 1+ years hands-on micro-section sample preparation or materials lab experience

PREFERRED SKILLS AND EXPERIENCE:

• Strong desire to expand technical knowledge
• Experience with characterization techniques (SEM/EDS)
• Previous experience performing PCB manufacturing quality analyses
• Familiarity with PCB failure modes (IPC-A-600, IPC-6012)
• Experience working with LIMS software
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime, and/or weekends as needed
• Must be available for one of the shifts below:
  • A-Shift: 5:00 AM - 5:00 PM (Sunday - Tuesday and every other Wednesday)
  • B-Shift: 5:00 AM - 5:00 PM (Thursday - Saturday and every other Wednesday)
  • C-Shift: 5:00 PM - 5:00 AM (Sunday - Tuesday and every other Wednesday)
  • D-Shift: 5:00 PM - 5:00 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces

MECHANICAL SPECIALIST (STARLINK PCB) 

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class specialists to help maximize Starlink’s utility for communities and businesses around the world.

The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. We are looking for talented manufacturing specialists to help establish new manufacturing and test processes and support full-scale production for the user terminal (a high-volume manufactured product that consumers will have in their homes).

RESPONSIBILITIES:

• Execute new product introduction builds across all work centers
• Program, load, and operate automated equipment
• Triage non-conforming products and drive resolution and preventative actions
• Resolve production issues while ensuring design integrity, product quality, and delivery timelines
• Perform process development and validation on new models in extremely aggressive timelines
• Ensure the successful transition of products from development to volume production
• Identify continuous improvement opportunities for yield, performance, and cost
• Define maintenance schedules and support activities

BASIC QUALIFICATIONS:

• Bachelor’s degree in an engineering, math or science discipline; OR high school diploma or equivalency certificate and 3+ years of professional experience in a hands-on manufacturing environment in lieu of a degree

PREFERRED SKILLS AND EXPERIENCE:

• Associate or bachelor's degree in an engineering, math, or science discipline
• Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware
• Experience programming, loading, and operating the following automated equipment: paste printer, solder paste inspection (SPI), pick and place, reflow oven, automated optical inspection (AOI), X-ray inspection, adhesive/coating dispenser, BGA rework
• Experience with electrical tests, in circuit and/or bed of nails testing
• Ability to deliver high-quality hardware in a fast-paced NPI environment
• Ability to adapt and process change quickly
• Excellent computer skills (email, Microsoft Windows, ERP/MRP/MES systems, iOS, executing custom-developed software)
• Excellent communication (written and verbal) and teamwork skills
• Ability to provide process and design improvement suggestions to engineering

ADDITIONAL REQUIREMENTS:

• Must be willing to begin work training on 1st shift (5:00 AM–5:00 PM) for initial 30 days
• Must be willing to work one of the following schedules upon completion of training (B and D shift preferred):
  • A-Shift: 5:00 AM - 5:00 PM (Sunday - Tuesday and every other Wednesday)
  • B-Shift: 5:00 AM - 5:00 PM (Thursday - Saturday and every other Wednesday)
  • C-Shift: 5:00 PM - 5:00 AM (Sunday - Tuesday and every other Wednesday)
  • D-Shift: 5:00 PM - 5:00 AM (Thursday - Saturday and every other Wednesday)
• Able to work all shifts and available for overtime and weekends as needed
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position
• Able to lift up to 25lbs. unassisted
• Willing to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international

CHEMIST (STARLINK PCB)

SpaceX is developing a low-latency, broadband internet system to meet the needs of consumers worldwide. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven technicians to drive manufacturing output and yield.  You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products.  You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.

As a PCB Chemical Lab Technician, you will be working in a chemical and materials lab supporting printed circuit board manufacturing in the Starlink factory. This is a versatile and highly skilled, hands-on lab role that will involve performing chemical analysis and additions, as well as executing reliability test methods, while meeting goals for output and quality. The ideal candidate is comfortable working in an analytical lab setting within a manufacturing environment and is motivated by Starlink’s mission to provide high-speed, low latency connectivity across the globe.

RESPONSIBILITIES

• Execute test methods and perform chemical analysis to support state-of-the-art PCB production lines
• Work with engineers to develop and document test procedures
• Recommend improvements to lab processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Execute start-up and shutdown procedures for lab equipment
• Track schedule for and perform preventive maintenance and calibration of equipment and instruments
• Perform first level troubleshooting, provide feedback, and work with maintenance and engineering teams to drive root cause of equipment downtime
• Ensure lab equipment is maintained and calibrated
• Clean chemical processing equipment and tools
• Maintain inventory of consumables
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Read, interpret, and follow technical documents
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Cross train on microsection analysis

BASIC QUALIFICATIONS:

• High school diploma or equivalency certification
• 1+ years hands-on chemical testing or Associate's degree 

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor's or Associate's degree in a STEM field
• Strong desire to expand technical knowledge
• Experience in a wet chemistry lab performing titrations, photometry, atomic absorption spectroscopy, or similar tests
• Experience performing electrochemical analyses (i.e., CVS)
• Previous experience performing PCB fabrication quality analyses
• Familiarity with PCB failure modes (IPC-A-600, IPC-6012)
• Experience working with LIMS software
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed
• Due to the nature of production line bring-up, the work schedule will evolve
  • Will start as 5 AM - 5 PM (Monday - Thursday) 
  • Final permanent schedule: B-Shift: 5 AM - 5 PM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces

WATER TREATMENT TECHNICIAN, UPW & WASTEWATER (STARLINK)

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven technicians to drive manufacturing output and yield. You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products. You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.

As a Water Treatment Technician on Starlink, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction, and a drive to correct those issues in advance of undesirable events. This position is responsible for the development, implementation, and operationalization of equipment, facilities, treatment and manufacturing process technologies necessary for high volume production. This role will focus on our two ZLD (zero liquid discharge) water treatment facilities, one supporting our PCB operations (largest printed circuit fab in North America!) and the other our Chip Packaging Plant (featuring a state of the art panel level packaging process). You will ensure reliable water quality for our partner teams, in a fast-paced, innovative manufacturing environment. 

RESPONSIBILITIES:

• Operate and monitor UPW (ultrapure water) systems, including reverse osmosis (RO), electrodeionization (EDI), UV disinfection, and filtration
• Manage wastewater treatment processes, including pH neutralization, evaporators (multiple-effect vacuum and MVR units), clarification/precipitation and solids dewatering, AOP (advanced oxidation processes), crystallizers, and a variety of other processes (TMF, UF, etc.)
• Perform routine preventative maintenance, calibration, and troubleshooting on pumps, valves, sensors, membranes, and control systems
• Conduct daily water quality sampling, analysis (e.g., TOC, silica, metals, conductivity), and data logging using tools like Hach analyzers or similar
• Respond to alarms, investigate excursions, and implement corrective actions to minimize downtime (target: >99.9% system availability)
• Collaborate with manufacturing, EHS, and engineering teams to optimize water usage, reduce waste, and implement sustainability initiatives
• Ensure adherence to OSHA, EPA, and SpaceX safety protocols, including lockout/tagout (LOTO) and chemical handling
• Execute startup and shutdown procedures for production equipment
• Identify equipment and process deviations and perform corrective actions
• Work with engineers and technicians to create operating procedures
• Use knowledge of systems and existing documentation like schematics and parts lists to create and maintain a mature and efficient hardware inventory system – including procurement of critical spares
• Identify continuous improvement opportunities for uptime and quality
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Read, interpret, and follow technical documents such as manufacturing work instructions
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

BASIC QUALIFICATIONS:

• High school degree or equivalency certificate
• 2+ years of experience working in a hands-on technical position OR an associate’s degree in a STEM field

PREFERRED SKILLS AND EXPERIENCE:

• Proficiently use a computer and MS Outlook, Word, Excel, and PowerPoint
• 3+ years of hands on experience in UPW production and/or industrial wastewater treatment (semiconductor, pharma, or electronics manufacturing ideal)
• Experience in a chemical manufacturing or oil/gas industry
• Strong knowledge of water chemistry, ion exchange, RO/EDI systems, and wastewater technologies
• Proficiency with water quality instrumentation and basic PLC troubleshooting
• Experience working in a manufacturing environment or wet lab
• Experience with process parameters and engineering units for temperature, pressure, flow, and power
• Ability to read and understand P&ID and schematic wiring diagrams
• Experience with mechanical equipment and systems requiring the isolation of the malfunction, disassembly of industrial machinery and repair/replacement of bearings, gears, structural components
• Experience with lock out tag out, job hazard analysis, hot work permitting
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Experience using production and inventory management software such as MES/ERP
• Strong interpersonal, verbal, and written communication skills to work closely with other technicians and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight
• Current or past certification for IPC-A-600, IPC-6012 or equivalent

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed
• Due to the nature of production line bring-up, the work schedule will evolve
• Will start as 5 AM - 5 PM (Monday - Thursday) 
• Final permanent schedules:
• A-Shift: 5 AM - 5 PM (Sunday-Tuesday and every other Wednesday)
• B-Shift: 5 AM - 5 PM (Thursday - Saturday and every other Wednesday)
• C-Shift: 5 PM - 5 AM (Sunday-Tuesday and every other Wednesday)
• D-Shift: 5 PM - 5 AM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces

PRODUCTION SUPERVISOR (STARLINK PCB)

SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe.

As a supervisor on the Starlink production team, you will spearhead the production of millions of consumer-facing electronic devices that we ship to customers’ homes around the world. You will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from prototyping to full-scale production.

RESPONSIBILITIES:

• Coordinate and steer the collective efforts of electronics production associates
• Enforce area standards and run rules (includes bi-annual reviews and disciplinary action)
• Interface with area leadership and prioritize work based on production schedule and organizational goals
• Schedule risk identification and mitigation
• Coordinate support organization efforts to minimize production interruptions
• Ensure product quality and conformance to specifications
• Process non-conforming hardware to efficiently return them to conforming state and normal product flow
• Improve area safety and efficiency through regular auditing and continuous improvement
• Optimize product flow through the factory
• Perform root cause analysis and implement corresponding corrective action plans
• Identify and eliminate defects within the area value stream
• Reduce downtime for product and personnel
• Support efforts to transition product from engineering development to full rate production
• Review drawings and technical data packages for manufacturability while providing constructive feedback to engineering/design community

BASIC QUALIFICATIONS:

• Bachelor’s degree or 5+ years of professional experience in a manufacturing, production, or logistics environment in lieu of degree
• 1+ years of experience directly leading a team or project

PREFERRED SKILLS AND EXPERIENCE:

• 7+ years of professional experience in a manufacturing, production, or logistics environment
• 2+ years of experience leading a team or project
• Lean manufacturing training and experience
• Experience monitoring, tracking, and continually improving total cost equation
• Experience with applying lean manufacturing principles and efficiency methods
• Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists
• Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis
• Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting
• Experience preferred in fast-paced consumer electronics production environment 
• Six Sigma certification
• Able to adapt to constant changing work assignments and fast-paced work environment
• Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related programs

ADDITIONAL REQUIREMENTS:

• Must be available for one of the following shifts (start and end times are approximate):
  • A Shift – 5:00am-5:00pm, Sunday-Wednesday
  • B Shift – 5:00am-5:00pm, Wednesday-Saturday
  • C Shift – 5:00pm-5:00am, Sunday-Wednesday
  • D Shift – 5:00pm-5:00am, Wednesday-Saturday
• Ability to work extended hours and weekends as needed
• Able to travel for business trips up to 10% on an ongoing basis
• Ability to lift 25 lbs. unassisted
• Ability stoop, bend, crawl, and being able to maneuver in tight spaces
• Must be willing to work onsite, remote work not considered

CHEMICAL LAB TECHNICIAN (STARLINK PCB)

SpaceX is developing a low-latency, broadband internet system to meet the needs of consumers worldwide. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. We are looking for talented, creative, and driven technicians to drive manufacturing output and yield.  You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products.  You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.

As a PCB Chemical Lab Technician, you will be working in a chemical and materials lab supporting printed circuit board manufacturing in the Starlink factory. This is a versatile and highly skilled, hands-on lab role that will involve performing chemical analysis and additions, as well as executing reliability test methods, while meeting goals for output and quality. The ideal candidate is comfortable working in an analytical lab setting within a manufacturing environment and is motivated by Starlink’s mission to provide high-speed, low latency connectivity across the globe.

RESPONSIBILITIES

• Execute test methods and perform chemical analysis to support state-of-the-art PCB production lines
• Work with engineers to develop and document test procedures
• Recommend improvements to lab processes and work with engineers to develop, implement, and refine processes with a specific focus on reducing cost and downtime and increasing yield
• Provide feedback on failure modes and support engineering to drive root cause of yield limiters
• Execute start-up and shutdown procedures for lab equipment
• Track schedule for and perform preventive maintenance and calibration of equipment and instruments
• Perform first level troubleshooting, provide feedback, and work with maintenance and engineering teams to drive root cause of equipment downtime
• Ensure lab equipment is maintained and calibrated
• Clean chemical processing equipment and tools
• Maintain inventory of consumables
• Safely handle chemicals (including transporting and loading) and chemical handling equipment
• Collect, segregate, and transport waste from generation points to the hazardous waste storage area
• Read, interpret, and follow technical documents
• Ensure 5S standards are upheld by maintaining a clean and organized work area
• Cross train on microsection analysis

BASIC QUALIFICATIONS:

• High school diploma or equivalency certification
• 1+ years hands-on chemical testing or Associate's degree 

PREFERRED SKILLS AND EXPERIENCE:

• Bachelor's or Associate's degree in a STEM field
• Strong desire to expand technical knowledge
• Experience in a wet chemistry lab performing titrations, photometry, atomic absorption spectroscopy, or similar tests
• Experience performing electrochemical analyses (i.e., CVS)
• Previous experience performing PCB fabrication quality analyses
• Familiarity with PCB failure modes (IPC-A-600, IPC-6012)
• Experience working with LIMS software
• Experience handling flammable, toxic, corrosive, or hazardous chemicals
• Strong interpersonal, verbal, and written communication skills to work closely with engineering, other technicians, and cross-functional teams
• Ability to identify and maintain priorities for tasks and projects while staying organized
• Ability to rapidly change roles/responsibilities while working independently in a high-paced, challenging work environment with minimal oversight

ADDITIONAL REQUIREMENTS:

• Must be open to work all shifts, overtime and/or weekends as needed
• Due to the nature of production line bring-up, the work schedule will evolve
  • Will start as 5 AM - 5 PM (Monday - Thursday) 
  • Final permanent schedule: B-Shift: 5 AM - 5 PM (Thursday - Saturday and every other Wednesday)
• Must be able to lift up to of 25 lbs. unassisted
• Must be able to walk and stand for long periods of time
• Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
• Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
• Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces