Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

• Lead the design, development, and integration of complex electrical and mechanical systems for autonomous vehicles, ensuring they meet rigorous performance, safety, and reliability standards.
• Architect, analyze, and optimize vehicle electrical and networking systems (Automotive Ethernet, CAN) to enhance data throughput, fault tolerance, and system scalability.
• Spearhead the diagnosis and resolution of complex, intermittent system failures using advanced debugging tools (e.g., high-speed oscilloscopes, spectrum analyzers, logic analyzers) and sophisticated PC-based diagnostic and simulation software.
• Mentor junior engineers on best practices for system triage, troubleshooting, repair, and validation.
• Develop and execute comprehensive integration test plans for new vehicle features and subsystems, coordinating efforts across multiple engineering disciplines and external partners.
• Author and maintain high-level technical documentation for system architectures, design requirements, and validation procedures.
  
  

What we're looking for:

• Expert-level knowledge of vehicle electrical and networking systems (CAN, LIN, Ethernet, etc.) with a deep understanding of communication protocols and their limitations.
• Proven track record of success in root-cause analysis, systematic issue isolation, and resolution for complex hardware-software integration problems.
• Extensive experience with advanced Linux terminal troubleshooting, including scripting and low-level system diagnostics.
• Deep understanding of computer system architecture, including embedded systems, processing units, and networking hardware.
• Demonstrated ability to author and maintain highly technical documentation, including design specifications, test reports, and system validation plans.
• Exceptional problem-solving skills and the ability to thrive in a fast-paced, ambiguous environment.
• Excellent communication and interpersonal skills to effectively lead cross-functional teams and collaborate with external suppliers and partners.
• Extensive experience with various sensors, including cameras, LiDAR, and RADAR, and an understanding of their integration challenges.
• Master's degree or equivalent in Electrical, Mechanical, or Systems Engineering, or 10+ years of relevant experience in a senior-level role.
  
  

Preferred, but not required:

• Professional proficiency in programming languages such as Python or C++ for scripting, automation, and data analysis.
• Experience with advanced issue-tracking and project management platforms (e.g., JIRA, Polarion, Confluence), including dashboard creation and workflow optimization.
• Working knowledge of functional safety standards (e.g., ISO 26262) and their application in autonomous systems.

This role is hybrid from our Pittsburgh office. It requires in-office days each week.

Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

Our Vehicle Platform Components team is seeking a highly motivated Senior Engineer to assume ownership of the development and integration of the autonomous vehicle’s vision sensors. This position serves as the primary technical owner for the development, validation, and production readiness of our vision sensors. The incumbent will ensure that sensors adhere to all functional requirements and quality standards, and will support sensor delivery to satisfy all performance, cost, and timing objectives.

Key Responsibilities:

• Develop and manage component-level technical requirements throughout the program development lifecycle.
• Lead technical collaboration with component suppliers, serving as the internal technical expert for the component.
• Ensure all components comply with specifications for performance KPIs, safety, and reliability.
• Guarantee that components adhere to relevant industry standards and regulatory requirements.
• Collaborate with Design Release Engineers to ensure components meet the overall product's program targets and goals.
• Collaborate with Systems Engineers to confirm that component requirements satisfy system needs and that selected components integrate seamlessly into the overall system architecture.
• Responsible for validating component functionality through hands-on testing conducted at both the bench and vehicle levels.
• Lead issue resolution with suppliers and internal cross-functional teams in a timely and effective manner.

What We’re Looking For:

• 7+ years of experience in automotive component design, development and integration.
• Bachelor’s or Master’s degree in Electrical Engineering, Electronics Technology, Optoelectronics (or a related field).
• Demonstrated knowledge of optical systems, encompassing the construction and design of camera components.
• Experience with machine vision camera design, development and integration.
• Understanding of high-throughput Image Signal Processing (ISP) pipeline design and implementation.
• Experience with automotive communication protocols including CAN, CAN-FD, Ethernet, GMSL, and FPD-Link.
• Proficiency in Linux, including the ability to develop scripts (e.g., Python, C++) for testing, validation, and interaction with camera hardware.
• Familiarity with NVIDIA DRIVE AGX Orin / Thor architecture and developer kits.
• Experience with lab equipment, including power supplies, oscilloscopes, multimeters, and function generators.
• Proficiency in automotive diagnostic tools, including Vector tools (CANoe, CANape, vFlash).
• Experience with automotive environmental, EMI, and shock/vibration testing.
• Experience in root-cause analysis, with a focus on utilizing AV / ADAS vehicle logs to pinpoint sensor impairments that negatively affect autonomous system performance.
• Familiarity with automotive components validation documentation and procedures, such as DVP&R, DFMEA and PFMEA.
• Experience with requirement compliance, issue-tracking and task management software platforms such as JIRA, Polarion, Confluence, etc.
• Demonstrated experience collaborating with an automotive Tier-1 supplier on the technical development of electronic components.
• Understanding of vehicle integration, packaging, and functional safety standards (ISO 26262)
  
  

Bonus Points:

• Prior experience in automotive vision sensor hardware and software integration or ADAS technologies.
• Prior experience in an autonomous vehicle or robotics company.

Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

Our newly formed Design Release Engineering team, within the Vehicle Platform Engineering group, is seeking a highly motivated Staff Engineer to own the design release and integration of our autonomous vehicle’s compute and connectivity subsystem. This role serves as the primary technical authority for the end-to-end design, release, validation, and production readiness of our high-performance compute hardware and associated controllers. You will ensure robust technical execution, manage supplier and cross-functional alignment, and drive hardware delivery that meets all performance, cost, and timing objectives.

What You’ll Be Doing:

• Own the complete design release of the high-performance compute and connectivity hardware, including the mechanical mounting, alignment, thermal management, electrical interface, and vehicle network integration.
• Drive technical execution for the full product lifecycle, from concept and architecture definition to sustaining engineering and continuous improvement.
• Oversee the generation and release of all engineering documentation, including models and drawings, Bills of Material (BOM), specifications, and test reports, ensuring alignment with vehicle-level design.
• Define and maintain the Design Verification Plan & Report (DVP&R), ensuring successful validation against system performance targets.
• Lead the Engineering Change (ECN) process for compute and connectivity hardware, ensuring traceability, cost impact analysis, version control, and full cross-functional buy-in.
• Act as the primary technical and program interface to suppliers (Tier 1 and Tier 2), tracking part maturity through DV, PV, and PPAP phases to ensure tooling and delivery readiness.
• Build strong partnerships across the Systems Engineering, Autonomy, Software Infrastructure, Quality, and Vehicle Integration teams to ensure seamless hardware integration and manufacturability (DFM/DFA).
• Lead technical program reviews and design readiness assessments, proactively developing risk mitigation plans to ensure compute hardware maturity aligns with program milestones and build events.
• Provide regular, concise updates to technical leadership on design maturity, validation progress, open issues, and timely closure metrics.
  
  

What We’re Looking For:

• 8+ years of experience in automotive hardware design and release engineering, with direct ownership of Domain Controllers, HPCs, or Telematics units.
• Bachelor’s or Master’s degree in Electrical, Mechanical, Computer, or Systems Engineering (or a related field).
• Deep technical understanding of compute architectures, high-speed data buses, and wireless connectivity standards.
• Fundamental knowledge of validation documentation and processes, including DVP&R, DFMEA, and PFMEA.
• Expert-level experience with the manufacturing BOM and ECN processes, and a proven ability to manage technical discussions with external suppliers.
• Familiarity with CAD systems (e.g., NX, CATIA), Product Lifecycle Management (PLM) systems (including requirement management tools such as Polarion), and engineering release workflows.
• Strong understanding of vehicle integration, packaging, and functional safety standards (ISO 26262).
• Proven ability to lead complex initiatives, manage cross-functional teams, and execute to aggressive program timelines with minimal oversight.
  
  

Bonus Points:

• Experience with advanced in-vehicle prototypes and benchtop systems.
• Proven track record of driving goal-level impact across multiple teams or subsystems.
• Prior experience in a fast-growing autonomous vehicle or robotics company.

This role is based in our Pittsburgh office and requires in-office days each week.

Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

The SQE position is based at the Pittsburgh Technical Center, Pittsburgh PA, and reports to the Supplier Quality Manager based at the Las Vegas, Nevada Technical Center. Quarterly travel to Supplier manufacturing sites is anticipated (at a minimum). 

The SQE will be responsible for executing the Advanced Product Quality Planning (APQP) process with Suppliers selected for potential Generation 3 activities, in addition to pursuing continuous improvement and warranty reduction for the current Generation 2 build. The role involves conducting Program Reviews against established program milestones and escalating issues as necessary. The individual must ensure the supply base adheres to Motional standards, that quality and manufacturing processes are enabled, and that non-conformances are identified and prevented from proceeding to subsequent manufacturing sites. Prompt reaction to and cross-functional resolution of known non-conformances is required.

What you’ll do:

• Ensure supplier adherence to APQP processes, including product Production Part Approval Process (PPAP) submission and approval requirements.
• Review and approve supplier quality plans (Control Plans, Process Failure Mode and Effects Analysis [PFMEA]) for new components and assemblies essential for vehicle launch.
• Conduct reviews of supplier manufacturing processes and quality management systems.
• Facilitate root cause analysis and the implementation of corrective actions for supplier quality issues.
• Execute on-site supplier visits to conduct root cause analysis and verify the effectiveness of corrective actions related to supplier quality issues.
• Implement and monitor supplier part qualification and certification processes (PPAP, Run at Rate).
• Enhance the quality performance of suppliers through on-site workshops, providing technical assistance in developing robust quality systems, or offering other necessary technical support.
• Provide technical assistance during supplier launch, change-over, and ongoing production activities.
  
  

What We’re Looking For:

• A Bachelor's degree is mandatory. A degree in Engineering (Mechanical, Industrial, Electrical, Manufacturing, Welding, Plastics, Materials, Chemical preferred) or an equivalent Technical Degree such as Applied Mathematics, Chemistry, or Physics is acceptable.
• A minimum of 2 years of experience in quality, engineering, and/or manufacturing is required.
• Proficiency in reading and interpreting engineering drawings, performing part measurements, and understanding gage design and function.
• Demonstrated knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Proven knowledge of manufacturing and assembly plant processes, procedures, tooling, equipment, and facilities.
• Demonstrated knowledge of probability, statistical quality control, and design of experiments.
• Proven ability to investigate complex quality problems and apply sound technical judgment to develop effective solutions.
• Demonstrated ability to concurrently manage multiple projects and lead diverse cross-functional teams.
• High level of interpersonal skills necessary to work both independently and collaboratively.
• Strong oral, written, and presentation communication skills.
• Ability to travel up to 75% (domestic and international).
• This position necessitates the ability to legally operate a motor vehicle on a regular basis.
  
  

Bonus Points:

• One or more years of Original Equipment Manufacturer (OEM) or Tier 1 experience within automotive quality, manufacturing, or engineering functions, including demonstrated experience and capability in any of the following areas:.
• Statistical Problem Solving (e.g., Red X, Six Sigma, DMAIC).
• Product Engineering.
• Lean Manufacturing and/or Manufacturing Quality.
• Manufacturing, Process, and/or Tool Engineering.
• Quality Systems Planning (APQP), including PPAP.

This role is based in our Pittsburgh office and requires in-office days each week.

Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

Our newly formed Design Release Engineering team, within the Vehicle Platform Engineering group, is seeking a highly motivated Staff Engineer to own the design release and integration of  vehicle control and interface subsystems. This role serves as the primary technical authority for the end-to-end design, release, validation, and production readiness of key vehicle modules, including core systems such as Autonomous Emergency Braking (AEB), Vehicle Interface Controllers (VIC), Cabin Monitoring Systems, and Human-Machine Interface (HMI) hardware. You will ensure robust technical execution, manage supplier and cross-functional alignment, and drive hardware delivery that meets all performance, cost, and timing objectives.

What You’ll Be Doing:

• Own the complete design release of critical vehicle system hardware, including the mechanical mounting, alignment, thermal management, electrical interface, and vehicle network integration.
• Drive technical execution for the full product lifecycle, from concept and architecture definition to sustaining engineering and continuous improvement.
• Oversee the generation and release of all engineering documentation, including models and drawings, Bills of Material (BOM), specifications, and test reports, ensuring alignment with vehicle-level design.
• Collaborate closely with the base vehicle supplier (OEM partner) to ensure seamless mechanical, electrical, and network integration of the vehicle controllers and interface modules into the base vehicle architecture, managing shared Interface Control Documents (ICDs).
• Define and maintain the Design Verification Plan & Report (DVP&R), ensuring successful validation against system performance targets.
• Lead the Engineering Change (ECN) process for all assigned vehicle system modules, ensuring traceability, cost impact analysis, version control, and full cross-functional buy-in.
• Act as the primary technical and program interface to suppliers (Tier 1 and Tier 2), tracking part maturity through DV, PV, and PPAP phases to ensure tooling and delivery readiness.
• Build strong partnerships across the Systems Engineering, Autonomy, Software Infrastructure, Quality, and Vehicle Integration teams to ensure seamless hardware integration and manufacturability (DFM/DFA).
• Lead technical program reviews and design readiness assessments, proactively developing risk mitigation plans to ensure compute hardware maturity aligns with program milestones and build events.
• Provide regular, concise updates to technical leadership on design maturity, validation progress, open issues, and timely closure metrics.
  
  

What We’re Looking For:

• 8+ years of experience in automotive hardware design and release engineering, with direct ownership of ADAS/Active Safety hardware, low-level vehicle controllers, or interior electronic modules preferred.
• Bachelor’s or Master’s degree in Electrical, Mechanical, Computer, or Systems Engineering (or a related field).
• Deep technical understanding of core vehicle control architectures (e.g., AEB and VIC) and automotive network topologies (e.g., CAN-FD, automotive ethernet).
• Technical knowledge of interior electronics and cockpit integration, including HMI ECUs/displays, cabin monitoring sensors, and their associated high-speed video/data protocols (e.g., GMSL, FPD-Link).
• Fundamental knowledge of validation documentation and processes, including DVP&R, DFMEA, and PFMEA.
• Expert-level experience with the manufacturing BOM and ECN processes, and a proven ability to manage technical discussions with external suppliers.
• Familiarity with CAD systems (e.g., NX, CATIA), Product Lifecycle Management (PLM) systems (including requirement management tools such as Polarion), and engineering release workflows.
• Strong understanding of vehicle integration, packaging, and functional safety standards (ISO 26262).
• Proven ability to lead complex initiatives, manage cross-functional teams, and execute to aggressive program timelines with minimal oversight.
  
  

Bonus Points:

• Experience with advanced in-vehicle prototypes and benchtop systems.
• Proven track record of driving goal-level impact across multiple teams or subsystems.
• Prior experience in a fast-growing autonomous vehicle or robotics company.
  
  

This role is based in our Pittsburgh office and requires in-office days each week.

Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

This role is based in our Pittsburgh office and requires 5 in-office days each week.

Mission Summary:

As a Senior PLM/PDM Engineer, you will ensure Motional’s PLM/PDM systems and engineering toolchains operate smoothly and reliably. You will be the go-to expert for resolving and escalating issues related to CAD tools, data management, and PLM–ERP connectivity. You’ll work cross-functionally with engineering, design, operations, and supplier teams to support day-to-day development activities while driving continuous improvement in processes and documentation.

What you’ll do:

• Ensure CAD tools, PLM/PDM systems, and engineering applications function properly; investigate, resolve, or escalate issues as needed.
• Develop and maintain documentation standards for the Hardware Engineering organization.
• Create and update CAD parts, assemblies, and libraries—including vehicle assemblies and vendor-provided models.
• Generate detailed 2D drawings (detail, section, assembly) following drafting standards and GD&T best practices.
• Support product development, sustainment initiatives, and internal department projects.
• Collaborate with designers, engineers, and technicians to ensure engineering documents and drawings are complete, accurate, and consistent.
• Perform drawing checks and manage engineering change orders (ECO/CO), including BOM updates and routing.
• Manage file structures, metadata, references, and overall CAD data organization.
• Troubleshoot and resolve CAD-related issues across the organization.
• Create, maintain, and manage Bills of Materials (BOMs).
• Maintain and organize the CAD library to support scalable design workflows.
• Work closely with internal and external fabrication teams to support design release, scheduling, and installation on vehicles or hardware systems.
  
  

What We’re Looking For:

• Strong understanding of mechanical drawings and electrical schematics.
• Experience with CAD data management systems; CATIA V5 and SolidWorks strongly preferred.
• Minimum 3 years of hands-on experience with 3D CAD tools (preferably CATIA V5 or SolidWorks).
• Skilled in developing 2D layouts in CATIA or SolidWorks.
• Solid working knowledge of GD&T principles.
• Experience with PLM tools, ideally PTC Windchill.
• Deep understanding of automotive and consumer-electronics connection systems.
• Ownership mindset with the ability to drive the CAD documentation process end-to-end—from design and release through fabrication, installation, schedule coordination, and change management.
• Strong communication and collaboration skills, with the ability to work proactively across global, cross-functional teams.
• Excellent planning, organization, and attention to detail.
• Proficiency with Microsoft Word/Excel or Google Docs/Sheets.
• Experience with Jira, QuickBase, NetSuite, or Zip is a plus.
• Strong work ethic and ability to support production schedules and team priorities.
• Ability to multitask across multiple projects and timelines.
• Bachelor’s degree in Mechanical Engineering or equivalent industry experience with a proven ability to apply engineering principles in real-world applications.

Mission Summary:

Our Component Engineering Team in Pittsburgh is seeking a Senior Hardware Engineer for Radar Components to lead the development of next-generation radar technology powering advanced mobility systems. In this role, you’ll take ownership of radar component design from concept to production, defining requirements, selecting and managing suppliers, integrating systems, driving testing and validation, resolving issues, and ensuring production readiness. 

This is an onsite, hybrid position based in Pittsburgh, PA.

What you'll be doing:

• Lead technical supplier management, coordinating technical activities and project milestones across internal and external stakeholders.
• Compile, define, and maintain complete sets of requirements for radar components.
• Collaborate cross-functionally with Perception, Systems, Mechanical, Vehicle, Manufacturing, Quality, Software, Cybersecurity, Diagnostics, and Reliability teams.
• Develop and support testing for ML-based algorithms, including test design, planning, execution, and data collection.
• Lead radar acceptance, performance, and characterization testing to ensure robust system performance.
• Support and drive vehicle integration efforts for radar systems.
• Conduct root cause analysis and oversee issue resolution to maintain quality and reliability.
• Lead continuous improvement projects focused on radar components and processes.

What we're looking for:

• Deep understanding of radar hardware, radar DSP, and radar testing and performance.
• Proven experience developing automotive radar components and radar system design.
• 5+ years of experience in the automotive or a related industry.
• Experience with multi-domain controllers, secure gateways, or ADAS controller development.
• Comfortable debugging, disassembling, modifying, and installing electrical and mechanical systems in vehicles.
• Strong ability to operate within rigid design, integration, and time constraints.
• Basic knowledge of vehicle electrical and networking systems (CAN, LIN, Ethernet, etc.).
• Strong communication skills with the ability to collaborate globally across teams and levels to drive project success.
• Self-motivated, organized, and flexible individual with the ability to balance and prioritize multiple diverse projects.
• Creative and resourceful problem-solver who ensures quality results independently and in teams.
• Hands-on vehicle integration experience, including wiring harnesses and packaging, is preferred.
• Bachelor’s degree in Engineering (STEM) or a related field.

This position may require the use of power tools, as defined by OSHA (electric, pneumatic, liquid fuel, hydraulic, or powder-actuated tools). While performing job duties, employees may be required to convey and detect communication, remain stationary for up to 50% of the time, move within designated areas, and operate office equipment. The role may occasionally involve moving objects up to 50 pounds.

Mission Summary

You will be responsible for power and signal distribution design for Autonomous Vehicles. We are looking for someone who is proficient in hardware design life cycle, comfortable working in a high paced environment, and someone who can adapt quickly.  You will work cross functionally to gather details required for proper connections, generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation. You will also create detailed component and system qualification, validation test plans, and perform & oversee testing. 

We are looking for a detail-oriented problem-solver, able to employ critical thinking and time management skills and can work effectively both independently and in teams. Work with people of diverse backgrounds and develop creative and innovative ways to improve processes.

The Motional Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

What you'll be doing:

• Quickly gain a deep understanding of system architecture and specifications to implement the detailed electrical design of the AV system into a vehicle platform.
• Work within an interdisciplinary team to troubleshoot, test, and fix electrical and system issues in prototype vehicles and test fixtures.
• Support product design reviews.
• Review internal and external requirements and specification documentation.
• Perform worst case analysis and simulation to ensure compliance to system requirements.
• Generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation.
• Create detailed component and system qualification and validation test plans and perform / oversee testing.
• Support EMC certification testing and develop and maintain electrical DFMEA.
• Utilize structured problem-solving techniques for test failure resolution.

What we're looking for:

• 6+ years of experience in electrical engineering.
• Ability to read and interpret schematics and assembly drawings.
• Lab equipment experience with power supplies, oscilloscopes function generators and multimeters.
• Familiarity with wire harness design process and software tools to help EE team design vehicle power and signal distribution
• Ability to multitask across various project activities and work with a global team.
• Ability to provide hands-on debugging as needed during testing and evaluation.
• Experience with other vehicle communication networks (CAN, CAN-FD, Automotive Ethernet, LIN).
• Strong troubleshooting and debugging skills.
• Bachelor’s degree or higher in Electrical Engineering