ABOUT THE JOB

Anduril is seeking an experienced Electrical Engineer based in Costa Mesa, CA to contribute and lead subsystems development for missiles and UAVs. Looking for a self-starter with deep technical experience in defense industry developments to apply these skills in power systems, communications systems, battery technology, and avionics circuit designs. This individual will be responsible for electrical design, test and integration, from concept to production, while ensuring alignment with strategic business goals. The engineer will also be involved in managing key vendor relationships, and ensuring performance and reliability in our cutting-edge technologies.

WHAT YOU’LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of air vehicle avionics systems (flight controls, sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints
• Vendor surveys and evaluation to support sourcing for avionics system components.
• Conduct peer-level and cross-discipline design reviews
• Build up and test of avionics system components through lab, ground, and flight tests
• Low level firmware development for bring-up and test
• Root cause analysis in support of field operations

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS
• Familiarity with aircraft avionics module vendors and avionics component suppliers from past experience in UAS programs

ABOUT THE JOB

Anduril is seeking a Mechatronics Engineer to join the team at our Costa Mesa HQ. Here you will work on core product development for complex systems, including but not limited to optical systems, batteries, mechanisms, control systems, and sensors. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities.

WHAT YOU’LL DO

• Execute rapid evaluation of engineering concepts in a wide range of fields
• Identify partners in industry to engage with, and manage early vendor relationships
• Perform trade studies and physics-based analysis of blue-sky engineering problems
• Manage internal and external market research and comparisons
• Design, implementation, and test of complex electro-mechanical systems
• High level system ownership with large levels of professional autonomy
• Lead design reviews, run analysis, visit vendors, define and execute hardware test plans
• Build prototypes, analyze failures, and transition successful projects into production
• Support critical hardware demonstrations with customers as needed
• Travel to test sites as needed
• Use first principles physics as a basis for every decision
• Wear many hats

REQUIRED QUALIFICATIONS

• Experience in an immersive technical project (collegiate project teams or professional settings)
• Demonstrated leadership skills (collegiate project teams or professional settings)
• 5+ years of electrical/design experience in a professional setting
• Familiarity with microcontrollers, power conversion and system integration
• Ability to read, interpret, and manipulate schematics, wiring diagrams, and layouts.
• High competence with, and fluid use of, engineering first principles
• Experience in bare metal microcontroller design (STMicro, TI, NXP, etc) from schematic to bringup
• Strong organizational skills
• BS, MS or PhD in an engineering field, or equivalent work experience
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in ECAD (Altium, KiCad, etc) and MCAD (Solidworks, NX)
• Hands-on prototyping (soldering, board assembly, harnessing)
• Outstanding leadership and interpersonal skills
• Familiarity with designing for rugged environments
• Experience in bringing up device trees on embedded systems with a variety of connected sensors
• Experience with Electro-Mechanical and Electrical design concepts
• Experience in developing a variety of electronics hardware products (UAVs, wearables, firearms, high power electric propulsion, optical systems, or other complex mechanisms)
• Experience in characterizing circuits at both schematic and board level
• Familiarity with wireless communication protocols
• Experience with microcontroller wired communication protocols (USB, MIPI CSI2, SPI, I2C, CAN, CANFD, UART/RS232/RS422/RS485)
• Experience with motor and servo drive (BLDC/Brushed motor controller design, servo control systems)
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters)

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

WHAT YOU’LL DO

• Technical lead for electrical engineering team, creating embedded compute solutions for vehicle management, DSP, and networking.
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration).
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization).
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner.
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 15+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

ABOUT THE TEAM

The Lethality team is responsible for the design, analysis, testing, and transition to production of advanced warhead and ordnance systems across multiple platforms. This team operates at the intersection of design engineering, explosives understanding, safety, test execution, and numerical analysis to help Anduril build high-performing, mission-relevant systems faster and with better technical judgment.

This is not a narrow, siloed engineering environment. The team supports a broad range of applications across land, air, sea, ship, underwater, and other mission contexts, depending on where warhead-related capability is needed. In practice, that means the team contributes not only to design maturity and performance analysis, but also to safety-related questions such as storage compatibility, accidental initiation, sympathetic detonation risk, and other system-level concerns.

The team also plays a critical role in helping Anduril move quickly without relying on unnecessary physical testing. Numerical analysis and simulation are used to guide design decisions, shape experimental setups, inform diagnostic strategies, interpret results, and improve future product and proposal work. This role sits directly in that loop.

ABOUT THE JOB

Anduril is looking for a Warhead Design Engineer — Modeling & Simulation to join the  team in Costa Mesa, CA. This role is for an engineer who can use academic literature, empirical data, first-principles reasoning, and computational modeling to help steer warhead design and related ordnance decisions from concept maturity through testing and toward production readiness.

The objective of this role is not simply to run simulations. It is to use modeling and analysis as an engineering tool to improve decisions across design, explosive selection, initiation concepts, test planning, and post-test interpretation. The right person will help the team evaluate performance at a high level, build credible pre-test predictions, correlate model outputs to test data, and contribute to the broader engineering understanding needed to support complex munitions systems.

This role will support work across multiple programs rather than sitting in a tightly bounded lane. It is a strong fit for someone who wants broad technical exposure, meaningful influence on real engineering decisions, and the opportunity to work alongside a deeply technical team on some of the hardest warhead and effects problems in the business. Steven Todd described the role as one that should not be overly pigeonholed and that may grow into broader ownership over time depending on the person’s strengths.

WHAT YOU’LL DO

• Leverage academic studies and literature, empirical data, and simulation to steer the design of warheads and missile/ordnance systems from concept design maturity to production.
• Analyze lethality and performance using hand-calculations (Gurney equations) and multi-physics modeling and simulation tools (CTH, Sierra, Zapotec, etc.)
• Create pre-test predictions and correlate models with test data.
• Manage arena and system testing of munitions products from end-to-end, including project planning, design of experiments, and safety.
• Capture test video, compile data from ground and flight tests, and analyze results.
• Assemble/disassemble explosive test articles and precision targets.
• Individual Impact In this role, you will directly influence how Anduril designs, evaluates, and matures advanced warhead systems. Your work will help the team:
• absorb growing analysis demand across multiple active programs
• make better engineering decisions earlier in the development cycle
• reduce avoidable physical testing through smarter simulation and planning
• design more informative experiments and diagnostics strategies
• translate test data into better future designs, technical reports, customer-facing outputs, and proposal inputs

REQUIRED QUALIFICATIONS

• BS or higher degree in mechanical, aerospace, explosives, or another engineering discipline.
• 2-10 years’ work experience as an individual contributing engineer, focused on mechanical design, analysis, and testing of warheads or ordnance systems.
• Experience using multi-physics modeling and simulation tools such as ALE3D, Ansys Autodyn/LS-Dyna, CTH, EPIC, Matlab, Python, Sierra, Velodyne, Zapotec
• Test experience including data acquisition, data analysis, and project coordination
• Ability to travel as required for testing (surges up to 25%)
• Experience preparing engineering documentation (i.e. specifications, test procedures, technical reports, drawings, etc.)
• Passion for defending the United States and her allies
• Be able to obtain and hold a U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q)
• Expert level experience with multi-physics modeling and simulation tools
• Experience with munitions testing
• Experience with CAD design tools such as SolidWorks or NX CAD
• Prior experience in explosive operations and/or handling munitions
• Experience with the DoD Weapons Safety Boards
• Experience designing and scaling production of mechanical components at volume
• Experience developing or testing complex electrical or mechatronics systems

ABOUT THE JOB

Anduril is seeking a Electro-Mechanical Engineer to join the team at our Costa Mesa HQ. Here you will work on core product development for complex systems, including but not limited to optical systems, batteries, mechanisms, control systems, and sensors. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities.

WHAT YOU’LL DO

• Execute rapid evaluation of engineering concepts in a wide range of fields
• Identify partners in industry to engage with, and manage early vendor relationships
• Perform trade studies and physics-based analysis of blue-sky engineering problems
• Manage internal and external market research and comparisons
• Design, implementation, and test of complex electro-mechanical systems
• High level system ownership with large levels of professional autonomy
• Lead design reviews, run analysis, visit vendors, define and execute hardware test plans
• Build prototypes, analyze failures, and transition successful projects into production
• Support critical hardware demonstrations with customers as needed
• Travel to test sites as needed
• Use first principles physics as a basis for every decision
• Wear many hats

REQUIRED QUALIFICATIONS

• Experience in an immersive technical project (collegiate project teams or professional settings)
• Demonstrated leadership skills (collegiate project teams or professional settings)
• 5+ years of electrical/design experience in a professional setting
• Experience in PCB design and any ECAD (Altium, KiCAD, etc)
• Hands-on prototyping (soldering, board assembly, harnessing)
• Experience with any: controls, robotics, and or motor/servo drive systems (BLDC/brushed motor controller design and servo control systems)
• Familiarity with microcontrollers, power conversion and system integration
• Ability to read, interpret, and manipulate schematics, wiring diagrams, and layouts.
• High competence with, and fluid use of, engineering first principles
• Strong organizational skills
• BS, MS or PhD in an engineering field, or equivalent work experience
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in bare metal microcontroller design (STMicro, TI, NXP, etc) from schematic to bringup
• Outstanding leadership and interpersonal skills
• Familiarity with designing for rugged environments
• Experience in bringing up device trees on embedded systems with a variety of connected sensors
• Experience with Electro-Mechanical and Electrical design concepts
• Experience in developing a variety of electronics hardware products (UAVs, wearables, firearms, high power electric propulsion, optical systems, or other complex mechanisms)
• Experience in characterizing circuits at both schematic and board level
• Familiarity with wireless communication protocols
• Experience with microcontroller wired communication protocols (USB, MIPI CSI2, SPI, I2C, CAN, CANFD, UART/RS232/RS422/RS485)
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters)

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS/MS or higher degree in Electrical Engineering or equivalent, with 10+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years+ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

ABOUT THE JOB

Anduril is seeking a Electrical Engineer to join the team at our Costa Mesa HQ. Here you will work on core product development for complex systems, including but not limited to optical systems, batteries, mechanisms, control systems, and sensors. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities.

WHAT YOU’LL DO

• Execute rapid evaluation of engineering concepts in a wide range of fields
• Identify partners in industry to engage with, and manage early vendor relationships
• Perform trade studies and physics-based analysis of blue-sky engineering problems
• Manage internal and external market research and comparisons
• Design, implementation, and test of complex electro-mechanical systems
• High level system ownership with large levels of professional autonomy
• Lead design reviews, run analysis, visit vendors, define and execute hardware test plans
• Build prototypes, analyze failures, and transition successful projects into production
• Support critical hardware demonstrations with customers as needed
• Travel to test sites as needed
• Use first principles physics as a basis for every decision
• Wear many hats

REQUIRED QUALIFICATIONS

• Experience in an immersive technical project (collegiate project teams or professional settings)
• Demonstrated leadership skills (collegiate project teams or professional settings)
• 5+ years of electrical/design experience in a professional setting
• Experience in PCB design and any ECAD (Altium, KiCAD, etc)
• Hands-on prototyping (soldering, board assembly, harnessing)
• Experience with any: controls/actuation, robotics, and or motor/servo drive systems (BLDC/brushed motor controller design and servo control systems)
• Familiarity with microcontrollers, power conversion and system integration
• Ability to read, interpret, and manipulate schematics, wiring diagrams, and layouts.
• High competence with, and fluid use of, engineering first principles
• Strong organizational skills
• BS, MS or PhD in an engineering field, or equivalent work experience
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in bare metal microcontroller design (STMicro, TI, NXP, etc) from schematic to bringup
• Outstanding leadership and interpersonal skills
• Familiarity with designing for rugged environments
• Experience in bringing up device trees on embedded systems with a variety of connected sensors
• Experience with Electro-Mechanical and Electrical design concepts
• Experience in developing a variety of electronics hardware products (UAVs, wearables, firearms, high power electric propulsion, optical systems, or other complex mechanisms)
• Experience in characterizing circuits at both schematic and board level
• Familiarity with wireless communication protocols
• Experience with microcontroller wired communication protocols (USB, MIPI CSI2, SPI, I2C, CAN, CANFD, UART/RS232/RS422/RS485)
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters)

ABOUT THE JOB

Anduril is seeking a Mechatronics Engineer to join the team at our Costa Mesa HQ. Here you will work on core product development for complex systems, including but not limited to optical systems, batteries, mechanisms, control systems, and sensors. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities.

WHAT YOU’LL DO

• Execute rapid evaluation of engineering concepts in a wide range of fields
• Identify partners in industry to engage with, and manage early vendor relationships
• Perform trade studies and physics-based analysis of blue-sky engineering problems
• Manage internal and external market research and comparisons
• Design, implementation, and test of complex electro-mechanical systems
• High level system ownership with large levels of professional autonomy
• Lead design reviews, run analysis, visit vendors, define and execute hardware test plans
• Build prototypes, analyze failures, and transition successful projects into production
• Support critical hardware demonstrations with customers as needed
• Travel to test sites as needed
• Use first principles physics as a basis for every decision
• Wear many hats

REQUIRED QUALIFICATIONS

• Experience in an immersive technical project (collegiate project teams or professional settings)
• Demonstrated leadership skills (collegiate project teams or professional settings)
• 3+ years of electrical/design experience in a professional setting
• Familiarity with microcontrollers, power conversion and system integration
• Ability to read, interpret, and manipulate schematics, wiring diagrams, and layouts.
• High competence with, and fluid use of, engineering first principles
• Experience in firmware development for bare-metal, or embedded systems.
• Experience in bare metal microcontroller design (STMicro, TI, NXP, etc) from schematic to bringup
• Experience with any: controls, robotics, and or motor/servo drive systems (BLDC/brushed motor controller design and servo control systems)
• Strong organizational skills
• BS, MS or PhD in an engineering field, or equivalent work experience
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in ECAD (Altium, KiCad, etc) and MCAD (Solidworks, NX)
• Hands-on prototyping (soldering, board assembly, harnessing)
• Outstanding leadership and interpersonal skills
• Familiarity with designing for rugged environments
• Experience in bringing up device trees on embedded systems with a variety of connected sensors
• Experience with Electro-Mechanical and Electrical design concepts
• Experience in developing a variety of electronics hardware products (UAVs, wearables, firearms, high power electric propulsion, optical systems, or other complex mechanisms)
• Experience in characterizing circuits at both schematic and board level
• Familiarity with wireless communication protocols
• Experience with microcontroller wired communication protocols (USB, MIPI CSI2, SPI, I2C, CAN, CANFD, UART/RS232/RS422/RS485)
• Experience with motor and servo drive (BLDC/Brushed motor controller design, servo control systems)
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters)

ABOUT THE JOB

Anduril is looking for a highly skilled Principal Electrical Engineer to take charge of the design and development of cutting-edge avionics systems for UAVs. In this role, you will work closely with cross-functional teams to design, test, and deliver high-performance electrical systems. The ideal candidate will have extensive hands-on experience with analog and digital electronics, PCB design, and avionics standards, along with the ability to lead technical teams, ensuring the successful execution of projects. This is an exciting opportunity to lead innovative projects and drive the technical direction of key initiatives, while collaborating with internal teams to push the boundaries of technology.

WHAT YOU’LL DO

• Technical Leadership: Lead and contribute to the design and development of electrical systems for avionics modules and UAVs.
• Hands-on Engineering: Actively participate in the design, testing, and troubleshooting of circuits, PCB layouts, and other electronic systems.
• Collaboration: Work closely with cross-functional teams, including software, firmware, and mechanical engineers, to ensure seamless integration of electrical systems.
• Mentorship: Provide technical guidance and mentorship to junior engineers, helping to develop the team's capabilities.
• System Testing and Validation: Oversee system-level testing and validation to ensure designs meet performance, safety, and reliability standards.
• Vendor Coordination: Interface with vendors to source and select appropriate components for designs, ensuring quality and timely delivery.
• Project Management: Support project timelines and ensure that technical milestones are met, reporting on progress to senior management.

REQUIRED QUALIFICATIONS

• Experience: 7+ years of experience in electrical engineering, with a focus on avionics, UAV systems, or similar industries.
• Leadership Skills: Experience leading technical projects or small teams in an engineering environment.
• Technical Expertise: Strong hands-on knowledge of analog and digital circuit design, PCB design, and avionics systems.
• Project Management: Ability to oversee the technical aspects of projects from concept to delivery, ensuring that deadlines and specifications are met
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Familiarity with avionics design standards like DO-254, MIL-STD-810, and others.
• Proficiency with Altium Designer or equivalent PCB design tools.
• Strong problem-solving skills with a focus on delivering innovative solutions.

The Electrical Test Engineering team at Anduril develops test systems used to ensure the quality and reliability of our aerial and ground based systems. The team works on air vehicles such as Roadrunner, Ghost, Anvil and Fury and develop complex manufacturing test solutions to our internal manufacturing team or contract manufacturers. We work closely and cross-functionally with the rest of our Product Engineering groups that include Electrical, Mechanical and Firmware Engineering to solve and improve our manufacturing process, product quality and reliability.

We are looking to bring on a Manager - Test Automation Engineering to lead, design and deliver test systems for Anduril’s electronic products. This person will work with the rest of the organization to identify gaps in test coverage and own the design and delivery of the hardware and software test solution. A strong Manager - Test Automation Engineering will need to have a proven track record of delivering turn key test solution for electronic components and systems and has a background in hardware, software, integration and sustainment.

WHAT YOU’LL DO

• Manage a team of Electrical Test Automation Engineers fostering a culture of innovation, teamwork, and accountability within the electrical test engineering department.
• Collaborate with engineering leadership across multiple teams
• Provide Consultation with Design Engineer with DFT, provide feedback from test results to improve quality and test coverage, and resolve any problems found via test
• Define, own, and execute End of Line test plans for a set of new products and features, in collaboration with firmware, software, and hardware design teams
• Design, management, and execution of PCBA and electrical system components with hands on testing and rework as necessary
• Develop and execute strategic plans for testing capabilities, incorporating new technologies and methodologies. Lead the improvement of test systems for better automation, consistency, and efficiency.
• Execution and management of purchasing, build, integration and final commissioning of functional testers
• Manage budgets and forecast future testing needs, including personnel, equipment, and materials.
• Drive continuous improvement initiatives that result in safer workplaces, cost reduction, quality enhancement, and throughput maximization
• Serve as the technical expert and point of contact for test system issues, providing guidance and support to resolve complex problems.
• Support board bring-up and early design bench validation as needed

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 3+ years of experience in personnel and technical management.
• 8+ years of hands on Electrical Engineering experience designing functional test equipment
• 5+ years of experience in Schematic Capture and/or PCBA layout. Experience with Altium Designer is a plus
• 5+ years of experience in scripting language to develop automation. C/C++/C#, Python, MATLAB. Experience in LabVIEW is a plus
• Advanced experience with computer hardware communication bus protocols: USB, I2C, I2S, CSI, Ethernet, SPI, PCIe, HDMI, CAN, serial comms, etc
• Understanding of lab safety protocols when working in all types of lab environment
• Familiarity and understanding of measurement analysis techniques such as Gage RR and Process Capability Analysis
• Strong Electrical Fundamentals with strong understanding both hardware and software integration of test systems
• Experience with source code revision and control. Experience with GitHub is a plus
• Proficiency in MS Word, Excel, PowerPoint and VISIO
• Able to obtain DOD-Secret Security Clearance or higher

PREFERRED QUALIFICATIONS

• Master’s Degree in Electrical Engineering or equivalent
• 5+ years of experience in personnel and technical management.
• 10+ years of hands on Electrical Engineering experience designing functional test equipment
• A detail-oriented individual who strives in an environment that values effective team collaboration
• Experience in Product Release Cycle from prototype to production and key deliverables of each phase
• Hands-on experience with complex networking equipment, a deep understanding of networking protocols, test design and implementation chops and a background in IP network design
• Active Security Clearance (Secret) or higher

Anduril is an equal-opportunity employer, and we encourage candidates from all backgrounds to apply. If you are someone passionate to work on problems that matter, we’d love to hear from you!