ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous flight systems.

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

• Execute comprehensive test plans: set up, configure, and operate benchtop test equipment (oscilloscopes, power supplies, multimeters, signal generators, etc.) to verify performance of PCBs and integrated electronic systems.
• Perform precision PCB rework and assembly, including surface-mount (SMT) and through-hole soldering, component replacement, and jumper wire installation under a microscope. This also includes conformal coating and staking operations.
• Build, assemble, and modify complex cable and wire harness assemblies, including crimping contacts, soldering various connector types, and routing wires according to schematics and build documentation.
• Troubleshoot and diagnose failures in electronic assemblies (PCBs and harnesses) down to the component level using schematics, layouts, and wiring diagrams, then execute necessary repairs.
• Accurately document test data, rework actions, assembly details, and failure modes to support engineering analysis and continuous improvement.
• Lab maintenance: Assist in maintaining the lab environment to clean and safe standards, including equipment calibration.

• 4+ years of hands-on experience in electronics testing, assembly, and rework in an R&D or production environment.
• Strong technical literacy: Ability to read and interpret complex electrical schematics, assembly drawings, wiring diagrams, bill of materials (BOMs), and technical datasheets.
• Demonstrated proficiency in fine-pitch SMT and through-hole soldering (IPC J-STD-001 or equivalent standards). Experience with PCB rework, component replacement, and modification.
• Proven experience in building and modifying complex cable and wire harness assemblies, including crimping, soldering various connector types, and routing (IPC-620 or equivalent standards).
• Proficiency in diagnosing electronic failures to the component level using standard test equipment and documentation.
• Understanding of product development lifecycles, reliability, and compliance testing.
• Excellent written, verbal, interpersonal and communication skills.
• Self-organizing: Able to prioritize simultaneous tasks in an electronics lab/test environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

• Education: Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields.
• Active IPC-610, IPC-620, and J-STD-001 certifications.
• Experience using ECAD viewers (Altium, Eagle, OrCAD, etc.) to locate components on a board layout.
• Environmental testing: Familiarity with thermal chambers, vibration tables, and burn-in procedures.

Job Description

• Develop and perform system validation tests using leading-edge Data Center equipment and scalable automation platforms. The validation team holds customers’ system requirements in the highest regard and is solely responsible for certifying a product’s conformance to this high bar.
• Understand the performance and functionality requirements our AI fabric Switches must deliver to enable customers developing Data Center systems using Astera Labs’ game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications.
• Formulate a comprehensive validation plan for AI fabric switch products. automate the testing of ICs and board products in a data-centric manner, design experiments to root-cause unexpected behavior, report results and specification compliance in an automated fashion.
• Work with key customers directly to understand their care-abouts and highlight the unique capabilities and performance of Astera Labs’ solutions.

Basic Qualifications 

• Strong academic and technical background in Electrical or Computer Engineering. At a minimum, a Bachelor’s is required, and a Master’s is preferred.
• ≥3 years' experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications.
• Basic understanding of x86/ARM architecture, UEFI/Linux boot sequence. 
• Good understanding of High Speed Signaling Principles.
• Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for customer/internal meetings in advance, and to work with minimal guidance and supervision.
• Entrepreneurial, open-mind behavior and can-do attitude. Think and act with the customer in mind!

Required Experience 

• Hands-on, thorough knowledge of high-speed protocols like  PCIe, CXL, NVMe, or Ethernet.
• Experience with Silicon/System bring-up, validation, and debug experience, including in customer systems.
• A strong background in developing bench automation techniques, especially using Python, with emphasis on execution efficiency, repeatability, data analysis and reporting.
• Experience with lab equipment including protocol analyzers, in-circuit debuggers, and CPU-based tool suites.
• Ability to work on multiple projects.

Preferred Experience 

• Working knowledge of C or C++ for embedded FW and device drivers.
• Familiarity with PCIe compliance standards and ability to follow and be involved in compliance consortiums to adapt the tests to be run from X86/ARM based platforms.
• Knowledge of schematic capture and PCB layout tools from Cadence Allegro, Altium, etc.
• Exceptional interpersonal and collaboration skills, with a proven track record of effectively leading, influencing, and navigating complex matrixed environments.

Your base salary will be determined based on your experience and the pay of employees in similar positions. The base salary range is $135,000 USD - $165,000 USD for Senior Level, and $160,000 USD - $195,000 USD for Staff Level.

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Sr. Principal Electrical Engineer with expertise in digital circuit design and signal integrity analysis to serve as a technical authority for high-reliability digital electronics used in aerospace and military applications. This role spans the full product lifecycle, from early architecture and requirements shaping through detailed design, analysis, verification, production support, and fielded system sustainment. 

The ideal candidate is a senior digital hardware technical authority with deep high-speed board design, signal integrity, and power integrity expertise; a track record of setting design direction across programs; and the ability to guide cross-disciplinary teams through ambiguous, high-consequence hardware challenges. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Act as a technical authority for high-speed digital circuit design, signal integrity, and power integrity across multiple programs or product lines 

• Lead design and review of complex PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Lead digital hardware architecture trades and define design approaches that satisfy system performance, schedule, manufacturability, reliability, and qualification requirements 

• Set standards, procedures, and review practices for digital board design, stack-up definition, layout constraints, SI/PI analysis, bring-up, and verification 

• Resolve complex cross-disciplinary technical issues involving digital hardware, FPGA/software interfaces, RF coexistence, power distribution, EMI/EMC, thermal behavior, and mechanical packaging 

• Guide PCB layout strategy for controlled impedance, length matching, return paths, grounding, shielding, decoupling, power distribution networks, and isolation of sensitive circuits 

• Serve as the senior technical interface with customers, vendors, suppliers, and internal program leadership for digital hardware topics 

• Mentor engineers and coordinate technical activities across digital, FPGA, embedded software, RF, power, mechanical, manufacturing, and test teams 

• Serve as technical authority for hardware integration, verification, qualification testing, production transition, failure analysis, and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 15+ years of relevant engineering experience 

• Demonstrated technical leadership of complex high-speed digital hardware 

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Extensive experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Experience setting PCB layout strategy and design review criteria for high-speed digital, mixed-signal, and high-reliability electronics 

• Hands-on experience leading board bring-up, system integration, troubleshooting, verification, qualification, production transition, and failure analysis activities 

• Demonstrated ability to set technical direction and lead engineers through ambiguous, cross-disciplinary hardware challenges 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Expertise with signal integrity and/or power integrity analysis tools such as HyperLynx, Sigrity, ADS, Ansys SIwave, or equivalent 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces in high-reliability systems 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience establishing design standards, analysis templates, qualification approaches, or review processes for engineering teams 

• Experience designing for manufacturability and leading transition from prototype hardware to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Staff Electrical Engineer with expertise in digital circuit design and signal integrity analysis to lead the design and integration of high-reliability digital electronics for aerospace and military applications. This role spans the full product lifecycle, from requirements definition and architecture trades through schematic design, layout guidance, analysis, board bring-up, verification, production support, and field testing of mission-critical systems. 

The ideal candidate is a digital circuit designer with strong hands-on board design experience, practical signal integrity and power integrity judgment, and the ability to coordinate complex technical tasks across FPGA, software, RF, power, mechanical, manufacturing, and test teams with little supervision. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design of high-speed digital circuit cards and subsystems in accordance with customer requirements, applicable aerospace and military standards, and internal design practices 

• Design PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Contribute to digital hardware architectures, detailed schematics, stack-up recommendations, routing constraints, and design analyses for mission-critical electronics 

• Perform signal integrity and power integrity analysis for high-speed interfaces, memory buses, clocks, power distribution networks, and mixed-signal board environments 

• Define PCB layout constraints for controlled impedance, length matching, return paths, grounding, shielding, decoupling, and isolation of sensitive circuits 

• Collaborate with FPGA, embedded software, RF, power, mechanical, manufacturing, and test engineers to ensure digital hardware integrates cleanly within larger systems 

• Plan and support board bring-up, integration, troubleshooting, verification, qualification testing, and production transition activities 

• Generate and maintain schematics, analysis reports, design documentation, BOMs, interface documentation, and test plans 

• Serve as a technical interface with vendors, suppliers, and customers for digital hardware design topics 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 8+ years of relevant engineering experience 

• Experience designing high-speed digital hardware  

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Hands-on experience with hardware integration and lab test equipment, including oscilloscopes, logic analyzers, power supplies, and protocol or signal measurement equipment 

• Demonstrated ability to work independently on complex technical problems with a high level of attention to detail 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Experience with mixed RF, analog, power, and digital electronics in tightly integrated aerospace or defense hardware 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience performing design margin analysis, derating analysis, tolerance analysis, or worst-case circuit analysis 

• Experience designing for manufacturability and transition to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Sr. Principal RF Engineer with deep expertise in RF circuit design to serve as a technical authority for high-reliability RF and microwave electronics used in aerospace and defense applications. This role spans the full product lifecycle, from early architecture and requirements shaping through detailed design, simulation, verification, production support, and fielded system sustainment. 

The ideal candidate is an internally and externally recognized RF circuit technical authority who can set technical direction, establish design practices, mentor other engineers, and resolve the most complex RF, microwave, packaging, test, and system integration issues across multiple programs. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design, analysis, prototyping, and tuning of complex RF circuit boards incorporating catalog MMICs, including LNAs, power amplifiers, baluns, filters, mixers, and associated bias and matching networks 

• Lead architecture development and component trade studies to meet system-level RF performance requirements across programs or product lines 

• Set direction for schematics, layouts, and design documentation in accordance with customer requirements, aerospace standards, and internal design practices 

• Serve as technical authority for linear, nonlinear, and electromagnetic simulations using industry-standard tools (e.g., HFSS, ADS, AWR, or equivalent) 

• Guide PCB layout (Altium) and RF stack-up definition, including impedance control, grounding, shielding, and isolation techniques 

• Lead RF testing and characterization, including integration and troubleshooting at the board, module, and subsystem levels 

• Set direction for the design and specification of RF test equipment, fixtures, and automation 

• Mentor engineers and drive cross-disciplinary technical alignment across systems, power, digital, mechanical, and software teams to ensure RF designs integrate cleanly within larger systems 

• Serve as technical authority from development through production and post-production, including failure analysis and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 15+ years of progressively responsible RF engineering experience 

• Demonstrated technical leadership developing RF hardware for aerospace, defense, avionics, radar, EW, communications, or space systems 

• Expert understanding of RF fundamentals, including gain, noise figure, linearity, phase noise, stability, and impedance matching 

• Hands-on experience leading RF test activities using RF test equipment (e.g., VNAs, spectrum analyzers, signal generators, power meters) 

• Demonstrated ability to lead analysis, troubleshooting, and resolution of complex RF circuit performance issues 

• Strong attention to detail and ability to set technical direction in fast-paced, development-focused environments 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Recognized expertise with power amplifier design, analysis, and integration 

• Expertise with EMI/EMC considerations for RF systems and compliance with applicable aerospace standards 

• Experience setting direction for mixed-signal or RF/digital interfaces 

• Expert knowledge of manufacturing considerations for RF hardware, including tolerance analysis and yield drivers 

• Experience leading support for production hardware and fielded systems 

• Experience setting RF PCB layout best practices and design-for-manufacturing considerations 

• Familiarity with DO-160, MIL-STD-461, or similar aerospace/defense standards 

• Familiarity with RF antenna design principles 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Staff RF Engineer with deep expertise in RF circuit design to lead the design, analysis, integration, and verification of high-reliability RF and microwave electronics for aerospace and defense applications. This role works as part of a cross-functional, agile development team and spans the full product lifecycle, from early architecture and component trade studies through detailed design, testing, production support, and post-production sustainment of mission-critical systems. 

The ideal candidate is an experienced RF circuit designer with strong hands-on experience across RF boards, MMIC-based designs, packaging constraints, and test environments, and can provide sound technical judgment when balancing performance, risk, manufacturability, and schedule. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design, analysis, prototyping, and tuning of RF circuit boards incorporating catalog MMICs, including LNAs, power amplifiers, baluns, filters, mixers, and associated bias and matching networks 

• Perform architecture development and component trade studies to meet system-level RF performance requirements 

• Develop schematics, layouts, and design documentation in accordance with customer requirements, aerospace standards, and internal design practices 

• Conduct linear, nonlinear, and electromagnetic simulations using industry-standard tools (e.g., HFSS, ADS, AWR, or equivalent) 

• Support PCB layout (Altium) and RF stack-up definition, including impedance control, grounding, shielding, and isolation techniques 

• Plan and execute RF testing and characterization, including integration and troubleshooting at the board, module, and subsystem levels 

• Contribute to the design and specification of RF test equipment, fixtures, and automation 

• Collaborate with systems, power, digital, mechanical, and software engineers to ensure RF designs integrate cleanly within larger systems 

• Serve as a technical contributor from development through production and post-production, including failure analysis and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 8+ years of progressively responsible RF engineering experience 

• Experience developing RF hardware for aerospace, defense, avionics, radar, EW, communications, or space systems 

• Strong understanding of RF fundamentals, including gain, noise figure, linearity, phase noise, stability, and impedance matching 

• Hands-on experience with RF test equipment (e.g., VNAs, spectrum analyzers, signal generators, power meters) 

• Demonstrated ability to analyze, troubleshoot, and resolve complex RF circuit performance issues 

• Strong attention to detail and ability to operate effectively in fast-paced, development-focused environments 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with power amplifier design, analysis, and integration 

• Familiarity with EMI/EMC considerations for RF systems and compliance with applicable aerospace standards 

• Experience with mixed-signal or RF/digital interfaces 

• Knowledge of manufacturing considerations for RF hardware, including tolerance analysis and yield drivers 

• Experience supporting production hardware and fielded systems 

• Experience with RF PCB layout best practices and design-for-manufacturing considerations 

• Familiarity with DO-160, MIL-STD-461, or similar aerospace/defense standards 

• Familiarity with RF antenna design principles 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

We are looking for a Staff Quantum Control Hardware Engineer to join our Networking, Sensing, and Security division. As a Staff Engineer, you’ll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world’s best quantum computers and networked systems to solve the world’s most complex problems.  

In this role, you will design the critical physical layer interface for next-generation quantum networking nodes and high-precision sensing devices. You will build the low-noise, high-precision mixed-signal hardware necessary to control optical sources and read single-photon detectors with the fidelity required for secure quantum communication and entanglement distribution. This is an exciting opportunity to define the hardware architecture that will enable the future of the quantum internet and ultra-secure communications.

Responsibilities: 

• Design and develop low-noise, high-precision mixed-signal circuit boards (DACs/ADCs) to drive optical modulators and laser sources for quantum networking protocols. 
• Engineer ultra-low-noise readout interfaces for single-photon detectors used in Quantum Key Distribution (QKD) and sensing applications.  
• Ensure hardware designs maintain the signal integrity and coherence required to preserve quantum states during transmission and transduction.  
• Collaborate closely with FPGA Engineers to receive timing specifications and deliver signal conditioning specs for synchronization across network nodes. 
• Lead the full hardware lifecycle from schematic capture and PCB layout to simulation, testing, and system integration within a sensing or security testbed.  
• Troubleshoot complex hardware interactions to minimize phase noise and jitter in networking hardware.  
• Mentor junior hardware engineers and drive technical decision-making regarding the physical layer architecture for security products.

You’d be a good fit with:

• Bachelor’s or Master’s degree in Electrical Engineering, Physics, or a related engineering discipline.
• 8+ years of experience (or equivalent) in mixed-signal hardware design and PCB layout.
• Deep expertise in designing low-noise analog circuits and high-precision instrumentation.  
• Proven experience with high-speed ADCs/DACs and signal conditioning chains.  
• Proficiency with EDA tools for schematic capture and PCB layout (e.g., Altium, Cadence).  
• Strong understanding of signal integrity, power integrity, and grounding in sensitive measurement systems.

You’d be a great fit with: 

• Experience designing hardware for low-latency networks, optical communications, or quantum communications.
• Knowledge of precision sensing applications (e.g., magnetometry, atomic clocks).
• Familiarity with FPGA interfacing for high-speed protocol timing.
• Background in controlling fiber-optic components.

Location: This role will work onsite at our offices located in Bothell, WA or Vista, CA.
Travel: Up to 10%
Job ID:  1251

The approximate base salary range for this position is $128,119 - $167,740. The total compensation package includes base, bonus, and equity.

 Senior Structure Analysis Engineer

Location: Playa Vista, California (in-person, five days per week) 

Outpost is building the return lane from space. We’re developing reusable vehicles that bring payloads home from orbit safely and precisely, enabling faster in-space manufacturing, global delivery, and entirely new capabilities in the space economy. 

We’re a mission-driven team that cares deeply about the work and the people doing it. We are in an exciting stage of growth, which means ownership from day one. Our engineers design hardware, test it, iterate on it, and watch it move toward flight. We are based in the aerospace hub of Playa Vista, where you can spend your days solving complex problems and your evenings on the beach or in the mountains. The work is meaningful, the team is collaborative, and the mission matters. If you want to see the systems you design make it to orbit—and back—come build with us. 

The Role 

We’re looking for a Senior Structure Analysis Engineer to own structural and thermal analysis across flight hardware, from early design through flight readiness and production. This role sits at the center of engineering decision-making. You will be responsible for ensuring hardware is analytically sound, flight-worthy, and properly dispositioned - working closely with mechanical design, avionics, test, manufacturing, and systems teams. 

Responsibilities

• Own structural analysis of primary and secondary spacecraft structures, including but not limited to:
  • Modal analysis
  • Random vibration
  • Static and quasi-static loading
  • Coefficient of Thermal Expansion (CTE) and thermo-elastic loading
• Perform analysis on a wide range of hardware, including:
  • Flight structures and mechanisms
  • Avionics enclosures
  • PCB and electronics assemblies
  • Lead or support thermal analysis to evaluate operating margins, gradients, and coupled structural-thermal effects
• Serve as a technical authority for hardware disposition:
  • Assess flight and test hardware prior to production
  • Support nonconformance (NCR) resolution and root-cause analysis
  • Provide clear, defensible recommendations for accept-as-is, repair, or rework decisions
  • Partner closely with design and test teams to translate requirements into analysis models and to correlate analysis with test result                   
  • Contribute to analysis methodologies, best practices, and documentation that scale with the program. 

Qualifications 

• 8+ years of experience, with at least 5 years analyzing complex aerospace components.
• Bachelors required, Masters preferred in Mechanical Engineering, Aerospace Engineering, or a related engineering discipline.
• Proficiency in ANSYS FEM software (NASTRAN, FEMAP, Abaqus and similar acceptable)
• Senior-level expertise in either structural or thermal analysis, with demonstrated proficiency in the alternate discipline.
• Strong experience applying analysis to real flight hardware - not just academic models.
• Deep understanding of aerospace loading environments, material behavior, and margin assessment.
• Experience supporting hardware through test, flight qualification, and production.
• Ability to work hands-on in a fast-moving, on-site hardware environment and communicate technical results clearly to cross-functional teams.
• Experience analyzing space rated avionics and structures is a plus.
• Is able to work independently with little guidance of more senior team members.
• Shows ability to develop new and relevant skills beyond core technical function.
• Is able to consistently identify and propose solutions to technical problems in their function. 

Compensation & Benefit

• Competitive compensation: $140,000 - $180,000; (commensurate with experience). 
• Additional Compensation:  Annual performance-based bonuses that reward your impact.
• Shared upside: Meaningful equity in Outpost so you share directly in the value you help create.
• Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. 
  
• Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security.
• PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays.
• Invest in your future: 401(k) with company match to help you build long-term wealth.
• Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized.
• Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure.
• Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too.
• Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! 

You must be a U.S. citizen or lawful permanent resident of the U.S., protected individual as defined by 22 C.F.R. § 120.15 ,or eligible to obtain the required authorizations from the U.S. Department of State 

Role Overview

SirenOpt is looking for a Staff Electrical Engineer – FPGA / MPSoC & Digital Signal Processing Systems to lead the architecture, design, implementation, and validation of high-performance programmable logic, embedded processing, and FPGA-based digital signal processing systems powering our next-generation metrology platform.

This is a hands-on, high-impact role for someone who enjoys working close to the technology, solving hard problems quickly, and helping shape products in an early-stage startup environment.

This role is ideal for an engineer who is energized by deep tech, thrives in cross-functional environments, and is motivated by the opportunity to build something genuinely new.

You will work closely with a small, highly capable team to turn advanced sensing, digital signal processing, and control concepts into robust, high-performance, field-ready systems.

What You’ll Do

• Lead the architecture, design, implementation, and validation of FPGA, MPSoC, and FPGA-based digital signal processing systems for SirenOpt’s metrology platform.
• Develop designs from concept through architecture definition, RTL development, modeling, simulation, verification, testbench development, bench testing, and system bring-up.
• Build and maintain robust simulation and verification environments to validate functionality, timing, performance, and reliability at both block and system levels.
• Design and implement FPGA-based digital signal processing pipelines for real-time sensing and metrology applications, including FIR filters, synchronization pipelines, control loops, and low-latency data paths.
• Implement, evaluate, and refine signal-processing and control algorithms such as PID, ADPLL, filtering, and signal-conditioning methods for high-performance measurement systems.
• Use MATLAB and Python for algorithm development, modeling, data analysis, system validation, and signal and electrical data characterization.
• Perform large-scale data analysis to evaluate signal quality, characterize system behavior, and guide design tradeoffs and performance optimization.
• Collaborate closely with hardware, electrical, software, algorithm, and systems engineers to support end-to-end FPGA, MPSoC, firmware, and hardware integration.
• Read and interpret schematics to understand board-level architecture, interfaces, signal paths, power domains, and subsystem dependencies.
• Bring up new boards in the lab, troubleshoot issues independently, and debug hardware/firmware interactions using oscilloscopes, logic analyzers, signal generators, power supplies, and related lab equipment.
• Help translate frontier R&D concepts into scalable, reliable, and manufacturable digital systems.

What We’re Looking For

• B.S., M.S., or PhD in Electrical Engineering, Computer Engineering, or a related field, with 5+ years of relevant industry experience.
• Strong experience with end-to-end FPGA and MPSoC design, including architecture, RTL development, simulation, synthesis, timing closure, verification, and board bring-up.
• Advanced experience with FPGA-based digital signal processing for real-time systems, including FIR filters, synchronization methods, streaming pipelines, and control-oriented digital design.
• Strong experience with algorithm modeling and analysis using MATLAB and Python.
• Experience implementing and validating signal-processing and control techniques such as PID, ADPLL, filtering, and signal characterization workflows.
• Strong command of HDL/RTL implementation for digital signal processing, control, and high-performance data-path design.
• Hands-on experience developing testbenches, verification environments, and bench-level validation workflows.
• Strong understanding of firmware/hardware integration and system-level debugging in tightly coupled digital platforms.
• Ability to read and understand electrical schematics and work effectively at the board and subsystem level.
• Proven experience troubleshooting and bringing up hardware in the lab using standard electrical test equipment.
• Experience working in a fast-moving, multidisciplinary environment with a high degree of ownership and technical independence.
• Strong communication skills and a practical, problem-solving mindset.

Nice to Have

• Experience providing technical leadership for hardware and firmware engineering teams in complex product development environments.
• Experience with image processing or vision-related algorithm pipelines.
• PCB design experience, including familiarity with board-level layout considerations and signal integrity tradeoffs.
• Experience with high-speed interfaces, instrumentation systems, or real-time sensing platforms.
• Familiarity with mixed-signal systems and integration with ADCs, DACs, sensors, and embedded processors.
• Exposure to metrology systems, scientific instrumentation, or advanced materials applications.

Why Join SirenOpt

• Help define a new category in advanced materials metrology.
• Work on genuinely novel deep-tech hardware with real scientific and industrial impact.
• Join an early-stage team where your decisions directly shape the product, technology, and company.
• Build systems at the intersection of plasma science, electronics, sensing, AI-driven analytics, programmable logic, and advanced digital signal processing.
• Contribute to technology that can expand what researchers and industry teams are able to see, measure, and optimize.

Role Overview

SirenOpt is looking for a Staff Electrical Engineer – High Voltage Systems to help architect, design, and validate the high-voltage electrical systems behind our next-generation metrology platform.

This is a hands-on, high-impact role for someone who enjoys working close to the technology, solving hard problems quickly, and helping shape products in an early-stage startup environment.

This role is ideal for an engineer who is energized by deep tech, thrives in cross-functional environments, and is motivated by the opportunity to build something genuinely new.

You will work closely with a small, highly capable team to turn advanced plasma science into robust, manufacturable, field-ready systems.

What You’ll Do

• Lead and contribute to the electrical design and validation of SirenOpt’s plasma-based metrology systems.
• Design high-voltage and mixed-signal electronics from concept through schematic capture, layout guidance, bring-up, debug, testing, and integration.
• Collaborate with mechanical, systems, software, algorithm, and project engineers to develop reliable and scalable products.
• Research and evaluate new concepts, components, and architectures for advanced low-temperature plasma instrumentation.
• Work closely with customers and internal stakeholders to refine designs based on real-world use, integration needs, and product feedback.
• Create and maintain core technical documentation, including requirements, schematics, wiring diagrams, validation plans, and test reports.
• Help translate frontier R&D into practical hardware that can perform in demanding industrial environments.

What We’re Looking For

• B.S., M.S., or PhD in Electrical Engineering or a related field, with 5+ years of relevant industry experience.
• Strong experience in high-voltage PCB design, ideally above 5 kV.
• Hands-on experience across the full PCB development cycle, including concept, schematics, layout, manufacturing support, bring-up, testing, and HW/SW integration.
• Experience with mixed-signal designs that combine analog, digital, and high-voltage circuitry.
• Familiarity with DfX practices such as DFM and DFT, along with structured engineering review processes.
• Ability to work effectively in a fast-moving, multidisciplinary environment with a high degree of ownership.
• Strong communication skills and a practical, problem-solving mindset.

Nice to Have

• Experience in electron optics, electron beam systems, plasma systems, or similar high-voltage applications.
• Familiarity with CE, UL, or other regulatory compliance frameworks.
• Experience with high-precision industrial systems used in metrology, automation, or advanced material processing.
• Exposure to metrology sensors or instrumentation for advanced materials.

Why Join SirenOpt

• Help define a new category in advanced materials metrology.
• Work on genuinely novel deep-tech hardware with real scientific and industrial impact.
• Join an early-stage team where your decisions directly shape the product, technology, and company.
• Build systems at the intersection of plasma science, electronics, sensing, and AI-driven analytics.
• Contribute to technology that can expand what researchers and industry teams are able to see, measure, and optimize.

Vast is looking for an Electrical Engineer, Crew Avionics, reporting to the Manager of Human Interface Avionics, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. 

This will be a full-time, exempt position located in our Long Beach location. 

Responsibilities: 

• Own hardware from “cradle to grave”, coordinating with other teams to rapidly iterate on and deliver quality avionics products. You will own your hardware products in both success and in failure, though in the case of the latter you can expect support and resources rather than reprimand.
• Translate high-level operational requirements into detailed electrical specifications and design documents.
• Perform trade studies and analyses to select optimal components, technologies, and design approaches.
• Ensure that development and testing is carried out in a safe and controlled manner, prioritizing the safety of employees and the astronaut crew above all else. 
• Design and develop complex multi-layer printed circuit boards (PCBs) for flight hardware, adhering to rigorous space-grade standards.
• Schematic capture, component selection, and layout for high-reliability boards in a punishing space environment.
• Work with the PCB layout design team to help with the layout phase of design, and occasionally step up and layout a coupon or even flight PCB yourself 
• Perform signal integrity, power integrity, and EMI/EMC analysis to ensure robust designs.
• Analysis & Simulation:
• Conduct circuit analysis, worst-case analysis, fault tolerance analysis, and derating analysis.
• Utilize simulation tools (e.g., SPICE, MATLAB/Simulink) for design verification and optimization.
• Test & Verification:
• Develop and execute comprehensive test plans for PCBs and integrated systems.
• Troubleshoot and debug hardware, identify root causes, and implement corrective actions.
• Support environmental testing (vibration, shock, thermal vacuum, radiation, EMC) and flight qualification campaigns.
• Documentation & Review:
• Generate clear and concise design documentation, test procedures, and reports.
• Participate in design reviews and provide technical guidance to junior engineers.
• Participate in design reviews for peer’s PCB designs.
• Collaboration:
• Work closely with cross-functional teams including software, mechanical, systems engineering, manufacturing, test, and operations to ensure seamless cooperation on bringing the design to its final integration, flight, and decommissioning. 
• Communicate technical information effectively to both technical and non-technical stakeholders.

Minimum Qualifications:

• Bachelor’s degree in Electrical Engineering or a related field.
• Some experience in electrical engineering, with a focus on system and PCB design.

Preferred Skills & Experience:

• Proficiency in schematic capture and PCB layout tools (e.g., Altium Designer, Cadence Allegro, KiCad).
• Experience with analog and digital circuit design, microcontrollers, FPGAs, and communication interfaces (e.g., I2C, SPI, Ethernet, RS-422).
• Understanding of signal integrity, power integrity, and EMI/EMC principles.
• Experience with simulation tools (eg. SPICE) to evaluate design decisions and de-risk new circuit designs before spending the money on hardware. 
• Experience with hardware testing, troubleshooting, and debugging.
• Familiarity with audio electronics (speakers/microphones/amplifiers
• Experience with high-reliability/fault-tolerant electronics for aerospace or defense applications.
• Familiarity with space-grade components and radiation effects.
• Experience with human-machine interface (HMI) design principles.
• Experience designing audio systems - whether professionally or for your home movie theater!
• Experience designing lighting systems - whether professionally or for your spooky Halloween LED display!
• Familiarity with complex system architectures.
• Experience with environmental testing for flight hardware.
• Proficiency in scripting languages (e.g., Python) for automation and data analysis.
• Hands-on engineering - equal willingness to work at your desktop computer, with a soldering iron in the lab, and with a broom to clean up afterwards. 
• Ability to work effectively in a fast-paced, dynamic, and team-oriented environment.
• Excellent problem-solving and communication skills.
• Ability to independently but also collaboratively as a teammate to achieve ambitious goals.
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Pay Range: 

• Electrical Design Engineer I: $103,000
• Electrical Design Engineer II: $112,340 - $159,468
• Senior Electrical Design Engineer: $137,760 - $195,552

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Sustainment Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 4+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 5+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 2+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 8+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 3+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 12+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 4+ years of experience in New Space

ABOUT THE TEAM

The Intelligence Systems team is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are seeking a Senior RF Test Engineer specializing in EMI/EMC to join our expanding team in Santa Ana, CA. This role focuses on leading EMI/EMC (Electromagnetic Interference/Electromagnetic Compatibility) test design initiatives for our cutting-edge products.

WHAT YOU’LL DO

• Evaluation of high-speed digital, precision analog, RF, and high-power designs for EMI/EMC compliance.
• Work with design teams to establish manufacturing EMC test limits based on development characterization tests.
• Conduct tests to assess electromagnetic emissions and susceptibility performance.
• Troubleshoot and resolve EMI/EMC performance issues at the component level.
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.
• Stay updated on military and aerospace EMI/EMC standards (MIL-STD-461, DO-160, MIL-STD-704)
• Ability to generate requirements and work cross functionally with Mechanical, Thermal, Validation engineers
• Factory and manufacturing support from a design, DfX, quality, debug, and failure analysis perspective

REQUIRED QUALIFICATIONS

• 8+ years of professional experience in designing hardware products for EMI/EMC compliance.
• Knowledge of EMI/EMC Test Equipment such as spectrum analyzers, antennas, LISN, NF Probes, GTEM & Anechoic Chamber etc.
• Knowledgeable with analog and digital circuit design and PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Ability to design / edit test automation software such as LabVIEW using multiple architectures
• Familiarity with standard interfaces such as MIPI, DP, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, SOC devices and technologies.
• Ability to determine work priorities based on broad direction from management.
• Excellent communication skills and ability to work effectively with others.
• Ability to work within our company and team culture.
• Active U.S. Secret security clearance

WHAT YOU'LL DO

• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 8+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be able to obtain and hold a U.S. Top Secret Security Clearance

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. 

Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. 

Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. 

In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. 

PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. 

Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. 

Come join us. 

Job Summary:

The mission of PsiQuantum's Principal Hardware Design Engineer role is to support the Electronics team by owning hardware designs integral to the underlying system of the quantum computer. This engineer will collaborate in cross-functional teams of thermal, mechanical, firmware, optical engineers. The designs will meet the requirements of the overall system architecture and physical framework of the quantum computer.

Responsibilities:

• Define, Design and deliver production ready high-speed embedded hardware systems.
• Design, create schematics, and oversee PCB layout of analog and digital circuitry consisting of but not limited to high-speed transceivers, 10+ Gbps electrical and optical data links, FPGA's, microcontrollers, clock distribution, and power distribution.
• Ensure signal integrity and EMI suppression is accounted for in all designs.
• Design and create test set-ups for testing of electro-optic modules.
• Characterize, optimize, and debug analog, digital, and electro-optic circuitry using equipment such as mixed signal & sampling oscilloscopes, vector network analyzers, signal generators, multimeters, DC power supplies.
• Develop software to drive measurements.
• Analyze data and extract key performance parameters.
• Maintain detailed documentation of hardware designs, test results, and design changes.
• Software tools:
  • Orcad Schematic Capture and Allegro PCB Layout
  • C++, Python, RTL (VHDL or Verilog)
  • Keysight PathWave ADS
  • Microsoft Office

Experience/Qualifications:

• 7 years of experience with a Master Degree.
• 9-12 years of experience with a B.S. Degree.
• Results oriented.
• Delivers on commitments.
• Attention to detail.
• Data-driven in decision-making.
• Strong problem-solving skills.
• Proven team player with an ability to work effectively across departments, sites, time zones in direct and matrix team environments.
• Excellent verbal and written communication skills with an ability to communicate effectively to a variety of audiences ranging from senior leadership and technical experts to entry-level staff.

PsiQuantum provides equal employment opportunity for all applicants and employees. PsiQuantum does not unlawfully discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, national origin, ancestry, citizenship, age, physical or mental disability, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, or any other basis protected by applicable laws.

Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to recruiting@psiquantum.com.

We are not accepting unsolicited resumes from employment agencies.

Position  

The Hardware group at Eikon Therapeutics develops super-resolution, high-throughput optical instrumentation. The Hardware team is seeking a Senior Electrical Engineer to participate in future instrument development. As part of Eikon’s diverse team of biologists, medicinal chemists, hardware, and software engineers, you will design and deploy custom super-resolution microscopes and automated systems that will enable the exploration and quantification of Eikon’s high-content datasets. 

About you

You are an adventurous, passionate, and creative electrical engineer eager to apply your talents to empower a new way of discovering medicines in a highly interdisciplinary biopharmaceutical environment. You are excited about the challenges of developing cutting-edge hardware from the ground up to enable novel technologies and solve real-world problems, and you will bring to these challenges enthusiasm, high energy, intellectual curiosity, and technical excellence.

What you’ll do

• Join an engineering team designing super-resolution microscopes, including signal processing, motion control, robotics and system automation that enables Eikon’s scientific achievements
• Contribute to system design architecture of instrument control and data acquisition systems
• Design, prototype, and test electronic assemblies. Work closely with the microscopy and automation teams on design validation, implementation, and design improvements 
• Write FPGA and microcontroller firmware to implement required functionality. Write PC host code to test and characterize your design
• Build and release assemblies to be used by scientists and end-users, creating a full suite of documentation and test procedures 

Qualifications

• Bachelor's degree with 5 years of relevant experience or a Master’s degree with 3 years of relevant experience designing complex digital and analog circuity
• Systems design experience contributing to design architecture
• Ability and desire to bring your design through all stages including directing PCBA layout, working with contract manufacturers, testing, debugging and rework of high density PCBAs with fine pitch components 
• Strong experience debugging systems using oscilloscopes and logic analyzers
• Hands-on experience building test set-ups, reworking and modifying assemblies during development and testing
• Experience in high-speed circuitry design such as DDR memory interfaces 
• Proficiency with CAD systems for schematic capture and experience in directing and reviewing PCB layout for signal integrity and EMI 
• FPGA design and debug experience
• Experience in debugging and design validation of microcontrollers or SoC-based systems  
• Experience creating and implementing software and hardware test benches
• Demonstrated proficiency analog circuit design, analysis, and simulation / modeling 
• Strong communication and collaboration skills, presenting design ideas and receiving input from internal customers and product marketing
• Intel/Altera Quartusexperience and SystemVerilog proficiency is preferred 

At Eikon, employee compensation also includes bonus and equity compensation, in addition to several generous benefit programs, including:​

• 401k plan with company matching​
• Medical (premiums covered by Eikon at 95%), dental and vision insurance (premiums covered by Eikon at 100%)​
• Mental health and wellness benefits​
• Weeklong summer and winter holiday shutdowns​
• Generous paid time off and holiday policies​
• Life/AD&D Insurance (premiums covered by Eikon at 100%) and optional supplemental employee-paid life/AD&D policies ​
• Enhanced parental leave benefit​
• Daily subsidized lunch program when on-site​

The expected salary range for this role is $139,000 to $152,000 depending on skills, competency, and the market demand for your expertise.

ABOUT THE TEAM: 

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

WHAT YOU’LL DO:

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

You will:

• Oversee a 40+ member electrical engineering department, including electrical architecture, PCB design, harness design, firmware development, system integration, and test
• Own the design and integration of electrical subsystems for multiple products simultaneously
• Drive the transition of electrical designs from prototype to production
• Independently lead people management functions for the entire team, including overseeing personnel growth, resource planning, and hiring
• Review electrical engineering designs and oversee the definition and implementation of best practices
• Partner with mechanical, systems, manufacturing, and supply chain leaders to integrate electrical designs into products and repeatably build them in production
• Manage electrical engineering resources across current and emergent needs to maintain on-time delivery and reliable execution of program requirements
• Author and drive a compelling vision for our electrical engineering roadmap that helps to guide our products into the next generation of features
• Partner with business leaders to triage limited resources against new opportunities, using your business acumen to inform product planning

Qualifications:

• Proven track-record of owning the design and delivery of electrical systems for complex hardware products
• Demonstrated ability to independently design and integrate electrical components into production scale products
• Deep technical fluency and passion for engineering details
• Experience working on both high-power (>100kW) and low power (<20W) ground or automotive systems
• Past leadership of large, multi-discipline, electrical engineering teams
• Strong people management and hiring skills
• Success working in start-up, scale-up, or other high-ambiguity environments
• Business acumen and the ability to use financial metrics to guide engineering decisions
• 10+ years overseeing the development of complex electrical systems
• Bachelors degree or higher in electrical engineering
• U.S. Security Clearance eligible

Team Description:

We build the electrical systems that make high-bandwidth brain–computer interfaces possible. This includes neural signal acquisition and stimulation to wireless power delivery, embedded processing, and system integration—all within devices small enough to be implanted in the human body and efficient enough to operate under strict thermal and power constraints. Our work sits at the intersection of analog, RF, digital, and biological systems. Many problems in this space do not present clean abstractions or clear failure modes. Success often depends on careful measurement, iteration, and engineering judgment across multiple interacting systems.

Job Description and Responsibilities:

We are looking for an experienced, hands-on electrical engineer for implant electronics board design, integration with our custom chips, testing, and quality control. You will have the opportunity to contribute to advanced projects, not only work on incremental changes, and be an integral member of a small, fast-moving team. You will be working on all phases of board design (part selection, schematic design, layout, and bring-up) as well as collaborating closely with chip designers, firmware engineers, mechanical engineers, and microfabrication experts for system integration.

• Utilize electrical engineering fundamentals and best system design practices to build on your ability to deliver high-performant, reliable, and manufacturable extremely size-constraint systems
• Gain understanding of all phases of system and board design, from system definition to part selection, schematic design, layout, bring up, and design verification
• Contribute to R&D investigations and experiments to demonstrate feasibility of new technology for the implant and the charger
• Gain experience working cross functionally to ensure successful systems integration
• Contribute to system improvements that decrease latency and increase battery life, reliability, and safety
• Develop ability to design and deploy systems for implant-charger hardware in the loop testing, and manufacturing line quality control

Required Qualifications: 

• Strong EE fundamentals
• Experience designing PCBs for low power and size constrained applications
• Experience with PCB CAD tools (Altium, Eagle, KiCad, Allegro)
• Experience with sensors, power management, and signal/power integrity
• Comfortable with common communication protocols (SPI, UART, I2C, etc.)
• Comfortable with lab equipment (oscilloscope, VNA, etc.)
• Basic C and Python programming skills

Preferred Qualifications:

• Experience with firmware development for embedded systems (C/C++)
• Experience with wireless systems (BLE, WIFI, Zigbee)
• Experience building and bringing-up MCUs or FPGA
• Proficiency with ME CAD tools (Solidworks, AutoCAD)
• Experience with analog circuit design

Expected Compensation:

The anticipated hourly rate for this position is listed below.

California Hourly Flat Rate:
$35/Hr USD

Team Description:

The Convoy team, a specialized group within the Robot Mechanical Engineering team, is working on developing a first-of-its-kind brain-controlled assistive robotic arm (ARA). Our focus is on developing high-dimensional neural control of hardware, specifically robotic arms and hands. We design and integrate robotics systems, work directly with our clinical trial participants, and collaborate cross-functionally with hardware, software, electrical, and BCI engineers. We believe this work may be one of the best and most advanced paths to giving physical independence back to users with unmet medical needs.

Job Description and Responsibilities:

As a Mechanical & Robotics Engineer at Neuralink, you will design and produce hardware solutions for our assistive robotic arm. Your responsibilities may also include working on our brain-computer interface devices, surgical robotics, automation, microfabrication, and more. You will have the opportunity to own projects from concept to production, leveraging your mechanical engineering background in the challenging field of brain interfaces and human-robot interaction. Your responsibilities will include:

• Designing and integrating robot mechanical and electrical components and assemblies with a heavy emphasis on usability and safety
• Collaborating with clinical trial participants, neuroscientists, biologists, and engineers to establish design criteria
• Rapidly and effectively building systems to meet project goals
• Applying analytical methods, including calculations and simulations, for the design and optimization of structures and mechanical components
• Actively driving every phase of device launch, from hands-on early feasibility prototyping through manufacturing release

Required Qualifications:

• Bachelor’s degree in one of the following disciplines or equivalent experience: Mechanical Engineering, Robotics, Mechatronics
• Strong understanding of engineering first principles
• Minimum of 3 years of mechanical engineering industry experience, including internships and project teams where you owned products from concept to production
• Proficient in 3D CAD

Preferred Qualifications: 

• Experience with robotic systems such as robot arms, grippers, actuators, human-robot interaction
• Multidisciplinary experience in robotics software and control (e.g., Python, ROS, MATLAB, control theory)
• Electrical engineering proficiency (e.g., PCB design, wire harnessing, circuit design)
• Proficiency with conventional machining and rapid prototyping technologies

ABOUT THE ROLE

We are looking for a System Test Engineer with a focus on EMI/EMC to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, system, and software engineers to create test systems for development, qualification, verification, and validation purposes. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.

WHAT YOU'LL DO

• Core Responsibility: Own EMC test readiness end-to-end from translating designs into test configurations to driving schedules and deliverables across teams.
• Create test systems to support all phases of product development.
• Define cable harnesses, breakout interfaces, and test hardware setups.
• Collaborate with SW/FW for test modes, stimulation, and telemetry.
• Configure and verify DUT operating modes prior to and during EMC testing.
• Develop and maintain test setup and configuration documentation.
• Track and drive on-time delivery of test hardware, fixtures, and support equipment to the EMC team.
• Proactively manage the test schedule based on hardware availability, coordinate across disciplines, and remove blockers to eliminate dead time.
• Maintain real-time visibility into schedule risks and escalate early to keep milestones on track.
• Participate in design reviews and provide input to identify issues and drive design choices.
• Conduct root cause analysis in support of vehicle integration and field operations.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or equivalent.
• 3+ years design experience with NX CAD software for 3D modeling and drafting.
• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications.
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553).
• Proficient with schematic capture and PCB layout tools (e.g., Altium Designer, OrCAD, KiCad).
• Ability to read and interpret schematics, wiring diagrams, and cable harness drawings.
• Proficient with Microsoft Office Suite and engineering documentation tools.
• Must possess excellent communication skills.
• Eligible to obtain and maintain an active U.S. Secret security clearance

REQUIRED QUALIFICATIONS

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs.
• Exposure to EMC/EMI testing or familiarity with MIL-STD-461G test methods.
• Experience working in or supporting EMC test lab environments (shielded rooms, anechoic chambers).
• Familiarity with EMC test equipment such as spectrum analyzers, LISNs, current probes, or signal generators.
• Experience with simulation tools (e.g., LTspice, MATLAB, ADS) for filter or signal analysis.

THE ROLE

We are seeking a highly motivated Hardware Signal Integrity (SI) Engineer for Everpure’s Datastore team. In this role, you will own high-speed signal integrity analysis, simulation, and measurement for enterprise SSD platforms.

WHAT YOU'LL DO

• Own signal integrity analysis for SSD hardware from architecture through production.
• Drive board-level SI decisions, including: PCB material selection, via structures, loss tradeoffs, stackup definition and channel optimization.
• Perform SI simulations including: Insertion loss (IL), return loss (RL), crosstalk, TDR / impedance profiles.
• Lead TDR and S-parameter measurements, including: measurement setup, Calibration and de-embedding.
• Perform 3D-EM extraction and simulation for vias, connectors, and complex channel structures.
• Correlate simulation results with lab measurements to refine models and design assumptions.
• Use and customize IBIS and IBIS-AMI models for PCIe, NAND and DDR channel analysis.
• High speed signal eye diagram and margin analysis.
• Support debug activities where SI is a contributing factor.
• Collaborate cross-functionally with PCB design, system, firmware, mechanical, and test teams to ensure robust SI solutions.
• Document SI design guidelines and best practices to enable scalable, repeatable designs.
• Provide technical leadership and mentorship to junior engineers.
• We are primarily an in-office environment and therefore, you will be expected to work from the Santa Clara office in compliance with Everpure’s policies, unless you are on PTO, or work travel, or other approved leave.

WHAT YOU BRING

• 5+ years of experience in Signal Integrity engineering for high-speed systems.
• B.S. Electrical or Computer Engineering (M.S. is a plus).
• Strong SI simulation experience, must-have for PCIe and nice to have for NAND and DDR, for channel analysis, eye simulations, jitter, margin, etc.
• Hands-on TDR and S-parameter measurement experience
• Strong understanding of PCB design from an SI perspective, including materials, stackups, and via structures.
• Deep experience with Simbeor (3D-EM extraction and simulation).
• Ability to understand system design tradeoffs (SI, Performance, Mechanical, Thermal, Power).
• Familiarity w/ SSD design w/ different form factors is a plus
• Experience with SSD standard and compliance testing, ie PCI-SIG, NVMe, etc. is a plus
• Detail oriented, analytical, process savvy, and customer focused yet flexible and adaptable to business needs
• Highly self-motivated with the ability to work autonomously in a fast-paced, technical development environment
• Experience working in and leading cross-functional team
• High level of teamwork and collaboration skills

#LI-ONSITE

THE ROLE

As a cornerstone of our Hardware Development Team, you will lead the evolution of Everpure’s high-performance systems from initial architecture to global production. You’ll bridge the gap between visionary design and rock-solid reliability, collaborating across Engineering, Operations, and JDM partners to redefine what’s possible in enterprise storage. Your mission is to deliver hardware that isn’t just fast, but inherently robust and scalable for the world’s most demanding data environments.

WHAT YOU'LL DO

• Architect and Design: Drive the full product development lifecycle for next-generation storage hardware, from schematic capture and PCB layout to the integration of complex x86 architectures and high-speed bus technologies.
• Lead Hardware Validation: Design, implement, and automate sophisticated validation and qualification tests (including eDVT and system stress testing) to ensure every component meets Pure’s elite performance and reliability standards.
• Solve Complex Technical Challenges: Conduct deep-dive root cause and failure analysis (FA) on hardware issues, utilizing high-speed oscilloscopes and bus analyzers to harden systems against real-world failures and customer escalations.
• Optimize System Integrity: Audit and refine device-level power, signal integrity (SI), and thermal functionality, ensuring that high-speed interfaces (PCIe, Ethernet up to 800Gbps+) operate flawlessly under peak loads.
• We are primarily an in-office environment and therefore, you will be expected to work from the Santa Clara, CA office in compliance with Everpure’s policies, unless you are on PTO, or work travel, or other approved leave.

WHAT YOU BRING

• Hardware Design Mastery: Expert-level command of hardware design tools for schematic capture and PCB layout, coupled with a deep understanding of x86 architecture and high-speed signal integrity (SI) routing and analysis.
• Systems Engineering Expertise: Proven ability to architect complex compute, storage, and I/O systems, with hands-on experience qualifying subcomponents such as SSDs, AC/DC power supplies, and VR circuits.
• Automation & Scripting Fluency: Proficiency in developing automated test environments using Python or Bash to streamline hardware configuration and validation processes.
• Protocol Proficiency: Advanced knowledge of major bus technologies (PCIe, I2C, SPI) and high-speed Ethernet standards, with the ability to analyze protocol traces and electrical functionality at the component level.

  #LI-ONSITE

About the Team: 

The Avionics Test & Operations team is responsible for testing avionics hardware and systems across the entire product lifecycle of Terran R: component-, subsystem-, and vehicle-level. As an Avionics Test Engineer at Relativity Space, you will be responsible for designing, developing, and executing avionics testing strategies for our rocket systems. This includes working closely with the avionics design team to identify and troubleshoot any issues and developing automation and testing infrastructure to improve efficiency and effectiveness.

About the Role:

• Develop frameworks and infrastructure to conduct qualification and acceptance testing of Avionics components on the Terran R launch vehicle
• Design equipment to facilitate Avionics component testing: simulation circuits, auxiliary test equipment, test harnesses, mechanical fixtures and enclosures, and system validation tools
• Work with hardware design engineers and software engineers to derive test requirements and methodologies
• Create and maintain test plans and procedures for avionics systems
• Integrate, commission, and operate test rack hardware and software to support component- and system-level functional testing 

About You:

• Undergraduate or graduate degree (BS/MS/PhD) in Electrical Engineering, Computer Engineering, Computer Science, Aerospace Engineering, or a related field
• Experience with electronics hardware simulation or test
• Familiarity with data acquisition and control system platforms such as NI, Beckhoff, or similar 
• Experience working with electronics test equipment such as power supplies, DMMs, oscilloscopes, signal generators, and electronic loads
• Familiarity with common communication protocols such as Ethernet, CAN, UART, SPI, etc. 

Nice to haves but not required:  

• Experience with a schematic capture & PCB design tool such as Altium Designer
• Experience with analog sensors such as pressure transducers, RTDs, and accelerometers 
• Familiarity with embedded software development and integration for avionics systems
• Familiarity with scripting languages such as Python or MATLAB for data acquisition/recording and analysis
• Familiarity with wire harness design
• Familiarity with CAD tools such as NX

ABOUT THE JOB

Anduril is seeking a Electro-Mechanical Engineer to join the team at our Costa Mesa HQ. Here you will work on core product development for complex systems, including but not limited to optical systems, batteries, mechanisms, control systems, and sensors. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities.

WHAT YOU’LL DO

• Execute rapid evaluation of engineering concepts in a wide range of fields
• Identify partners in industry to engage with, and manage early vendor relationships
• Perform trade studies and physics-based analysis of blue-sky engineering problems
• Manage internal and external market research and comparisons
• Design, implementation, and test of complex electro-mechanical systems
• High level system ownership with large levels of professional autonomy
• Lead design reviews, run analysis, visit vendors, define and execute hardware test plans
• Build prototypes, analyze failures, and transition successful projects into production
• Support critical hardware demonstrations with customers as needed
• Travel to test sites as needed
• Use first principles physics as a basis for every decision
• Wear many hats

REQUIRED QUALIFICATIONS

• Experience in an immersive technical project (collegiate project teams or professional settings)
• Demonstrated leadership skills (collegiate project teams or professional settings)
• 5+ years of electrical/design experience in a professional setting
• Experience in PCB design and any ECAD (Altium, KiCAD, etc)
• Hands-on prototyping (soldering, board assembly, harnessing)
• Experience with any: controls, robotics, and or motor/servo drive systems (BLDC/brushed motor controller design and servo control systems)
• Familiarity with microcontrollers, power conversion and system integration
• Ability to read, interpret, and manipulate schematics, wiring diagrams, and layouts.
• High competence with, and fluid use of, engineering first principles
• Strong organizational skills
• BS, MS or PhD in an engineering field, or equivalent work experience
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in bare metal microcontroller design (STMicro, TI, NXP, etc) from schematic to bringup
• Outstanding leadership and interpersonal skills
• Familiarity with designing for rugged environments
• Experience in bringing up device trees on embedded systems with a variety of connected sensors
• Experience with Electro-Mechanical and Electrical design concepts
• Experience in developing a variety of electronics hardware products (UAVs, wearables, firearms, high power electric propulsion, optical systems, or other complex mechanisms)
• Experience in characterizing circuits at both schematic and board level
• Familiarity with wireless communication protocols
• Experience with microcontroller wired communication protocols (USB, MIPI CSI2, SPI, I2C, CAN, CANFD, UART/RS232/RS422/RS485)
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters)

ABOUT THE TEAM 

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare. 

ABOUT THE JOB  

We are looking for an Electrical Test Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, system, and software engineers to create test systems for development, qualification, verification, and validation purposes. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you. 

WHAT YOU WILL DO 

• Create test systems to support all phases of product development

• Build up and test of avionics system components through lab, ground, and flight tests 

• Manage concurrent involvement in multiple projects at various stages 

• Participate in design reviews and provide input to identify issues and drive design choices 

• Conduct root cause analysis in support of vehicle integration and field operations 

REQUIRED QUALIFICATIONS 

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent 

• 3+ years hands on experience in using programming of test software (e.g., PXI, cDAQ, cRIO) 

• 3+ years design experience with NX CAD software for 3D modeling and drafting

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications 

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553) 

• Must possess excellent communication skills 

• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS 

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs 

ABOUT THE TEAM  

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.  

ABOUT THE JOB   

We are looking for an Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.  

WHAT YOU WILL DO  

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development.  

• Build up and test of avionics system components through lab, ground, and flight tests  

• Manage concurrent involvement in multiple projects at various stages  

• Participate in design reviews and provide input to identify issues and drive design choices  

• Conduct root cause analysis in support of vehicle integration and field operations  

REQUIRED QUALIFICATIONS  

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent  

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications  

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)  

• Must possess excellent communication skills  

• Eligible to obtain and maintain an active U.S. Secret security clearance  

PREFERRED QUALIFICATIONS  

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs  

• Experience with Siemens Capital software for 2D modeling and drafting. 

ABOUT THE TEAM    

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.    

ABOUT THE JOB     

We are looking for an Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.    

WHAT YOU WILL DO    

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development

• Build up and test of avionics system components through lab, ground, and flight tests    

• Manage concurrent involvement in multiple projects at various stages    

• Participate in design reviews and provide input to identify issues and drive design choices    

• Conduct root cause analysis in support of vehicle integration and field operations    

REQUIRED QUALIFICATIONS    

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent 

• Knowledge of Linux command line syntax, Virtual Machines, IP addressing and subnet structures, interpret system diagrams, lab equipment usage (power supply, voltmeter, oscilloscope, SA, SG, VNA), troubleshooting skills

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications    

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)    

• Must possess excellent communication skills    

• Eligible to obtain and maintain an active U.S. Secret security clearance    

PREFERRED QUALIFICATIONS    

• 3+ years experience designing and integrating electrical systems into high-speed air vehicles

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs    

• Experience with Siemens Capital software for 2D modeling and drafting. 

We are seeking Firmware Intern for Summer 2026 (May/June - August/September). This is a paid, in-person, 12 week internships based out of Costa Mesa, CA.

What You’ll Do

• Design electronics from concept to functional prototype, including hardware selection, PCB design, and system level integration.
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and software debugging tools.
• Develop low-level firmware/software for microcontrollers, embedded Linux systems, and supporting development & testing tools.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages

Required Qualifications

• Perusing Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent.
• Must be a rising senior at the time of their internship and returning to school at the end of their internship to continue their academic studies for at least one quarter/semester.
• U.S. Person status is required as this position needs to access export controlled data.
• Ability to complete an in-person 12-week internship in one of our offices.

Preferred Qualifications

• Familiarity with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools.
• Exceptional organization and communication skills (both written and oral).
• Experience with Altium Designer or equivalent electronic design automation tools.
• Proficiency with C/C++ and common languages (Python, Rust, Haskell, etc.)

ABOUT THE TEAM
Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB
We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous maritime systems.

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment with autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 5+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Comfortable with a variety of electronic CAD tools (NX, SolidWorks, others acceptable)
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• Familiarity with developing and executing test plans for complex systems
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with common MCU, CPU, FPGA devices and technologies
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE JOB

As an Senior Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.
• Active Security Clearance or ability to obtain one.

WHAT YOU'LL DO

• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 10+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be able to obtain and hold a U.S. Top Secret Security Clearance

ABOUT THE TEAM

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.

ABOUT THE JOB 

We are looking for an Senior Electrical Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for end-to-end avionics systems and subsystems development. You will also be working on design, integration, testing, and validation processes. This will require knowledge and experience in PCB design, harnessing, process management, and cross-functional teamwork. If you are looking to join a team in rapid avionics development, then this role is for you.

WHAT YOU’LL DO

• Develop high performance, high efficiency, and highly robust avionics solutions for air vehicle platforms
• Develop reliable on-board communication systems to exchange high bandwidth data across various air and ground assets
• Architect, design, and build high-speed digital PCBAs (schematic capture, simulation, board layout)
• Help decide what to do in-house and what to outsource, communicate design requirements with external vendors and help drive the progress
• Develop relationships with external vendors and communicate design requirements to external vendors and suppliers.
• Work cross-functionally between software, firmware and hardware teams
• Develop hardware validation test plans for sub-system and full system products.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, or a closely related field.
• 8+ years relevant experience in electrical hardware design.
• Experience designing high density PCB layouts with an understanding of cutting-edge PCB manufacturing technology.
• Deep understanding of thermal, mechanical, power and performance tradeoffs.
• Experience with creating test plans, benchmarking and performing validation tests to determine performance of complex hardware systems.
• Understanding of high-speed interfaces (PCIe, DDR, USB, MIPI, etc.), power integrity, and signal integrity.
• Knowledgeable of EMI/EMC susceptibility and emissions along with mitigation experience.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Experience with high performance SOMs (System On a Module).
• Experience in developing FPGA and ASIC architectures.
• Experience with rapid, hands-on prototyping.
• Skilled at soldering and reworking microelectronic components.
• Knowledgeable in RF investigation and analysis with the use of specialized equipment (Spectrum analyzer, Network Analyzer, etc) and RF simulation tool suites.
• Knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for sensors, actuators, firmware development, and inter-communication bus protocols (CAN-FD, Ethernet, SFP, 1553, etc).
• Experience using Linux command line interface (CLI).

ABOUT THE JOB

As an Senior Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 8+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 10+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.
• Active Security Clearance or ability to obtain one.

ABOUT THE TEAM
Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB
We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous maritime systems.

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment with autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 8+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Comfortable with a variety of electronic CAD tools (NX, SolidWorks, others acceptable)
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• Familiarity with developing and executing test plans for complex systems
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with common MCU, CPU, FPGA devices and technologies
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE TEAM   

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.   

ABOUT THE JOB    

We are looking for an Senior Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.   

WHAT YOU WILL DO   

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development.   

• Build up and test of avionics system components through lab, ground, and flight tests   

• Manage concurrent involvement in multiple projects at various stages   

• Participate in design reviews and provide input to identify issues and drive design choices   

• Conduct root cause analysis in support of vehicle integration and field operations   

REQUIRED QUALIFICATIONS   

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications   

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)   

• Must possess excellent communication skills   

• Eligible to obtain and maintain an active U.S. Secret security clearance   

PREFERRED QUALIFICATIONS   

• 4+ years experience designing and integrating electrical systems into high-speed air vehicles or missiles.

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs   

• Experience with Siemens Capital software for 2D modeling and drafting. 

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

ABOUT THE JOB

Anduril is looking for a skilled Electrical Engineer to take charge of the design and development of cutting-edge avionics systems for UAVs. In this role, you will work closely with cross-functional teams to design, test, and deliver high-performance electrical systems. The ideal candidate will have extensive hands-on experience with analog and digital electronics, PCB design, and avionics standards, along with the ability to lead technical teams, ensuring the successful execution of projects. This is an exciting opportunity to lead innovative projects and drive the technical direction of key initiatives, while collaborating with internal teams to push the boundaries of technology.

WHAT YOU’LL DO

• Hands-on Engineering: Actively participate in the design, testing, and troubleshooting of circuits, PCB layouts, and other electronic systems.
• Collaboration: Work closely with cross-functional teams, including software, firmware, and mechanical engineers, to ensure seamless integration of electrical systems.
• Mentorship: Provide technical guidance and mentorship to junior engineers, helping to develop the team's capabilities.
• System Testing and Validation: Oversee system-level testing and validation to ensure designs meet performance, safety, and reliability standards.
• Vendor Coordination: Interface with vendors to source and select appropriate components for designs, ensuring quality and timely delivery.
• Project Management: Support project timelines and ensure that technical milestones are met, reporting on progress to senior management.

REQUIRED QUALIFICATIONS

• Experience: 5+ years of experience in electrical engineering, with a focus on avionics, UAV systems, or similar industries.
• Technical Expertise: Strong hands-on knowledge of analog and digital circuit design, PCB design, and avionics systems.
• Project Management: Ability to oversee the technical aspects of projects from concept to delivery, ensuring that deadlines and specifications are met
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Familiarity with avionics design standards like DO-254, MIL-STD-810, and others.
• Proficiency with Altium Designer or equivalent PCB design tools.
• Strong problem-solving skills with a focus on delivering innovative solutions.

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 7+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.
• Active Security Clearance or ability to obtain one.

ABOUT THE ROLE

We are seeking highly experienced Senior Electrical Architects to play a pivotal role in defining and shaping the electrical architecture for our product lines. These roles will bridge the critical gap between high-level systems concepts and detailed electrical design, ensuring robust, scalable, and manufacturable solutions for our advanced defense systems. You will be instrumental in translating strategic Concepts of Operations (CONOPS) into actionable electrical requirements and architecture that will guide the entire product development lifecycle.

WHAT YOU'LL DO

• Lead the definition and development of robust, scalable, and maintainable electrical architectures for complex product lines.
• Conduct architectural trades, balancing performance, manufacturing feasibility, and future scalability.
• Bridge the gap between traditional Systems Engineering and Electrical Engineering by translating high-level CONOPS into detailed electrical requirements and functional modules.
• Allocate functions to specific electrical modules and subsystems, defining constraints, interfaces, and communications protocols.
• Flow module and subsystem information to PCB design and harnessing teams to guide designs in line with the overarching electrical architecture.

REQUIRED QUALIFICATIONS

• Proven ability to think strategically and define the long-term architectural vision for a product line
• Deep understanding of various communication protocols (e.g., Ethernet, CAN, RS-485, SDI, GMSL, SPI, I2C, PCIe) and their application in complex embedded systems
• Familiarity with embedded systems hardware, including MCUs, CPUs, and FPGAs, and their architectural implications
• Experience with full-cycle PCB design
• Experience with harnessing design and connector selection
• Successful track record of releasing products to production and delivering to end-users at scale
• Excellent communication, collaboration, and influencing skills to work across diverse engineering disciplines.
• Ability to obtain or have active DoD Top Secret Clearance with the ability to obtain SCI access,
• Must possess a Bachelor of Science degree in Electrical Engineering, or a related field AND 5+ years of experience in electrical engineering with a strong emphasis on systems architecture

DESIRED QUALIFICATIONS

• Experience with MIL-STD compliance.
• Utilize and bridge requirements management tools (e.g., DOORS) and Model-Based Systems Engineering (MBSE) tools (e.g., Cameo Systems Modeler) to ensure traceability and coherence from system-level to electrical requirements.